summaryrefslogtreecommitdiff
path: root/drivers/pci/pci-driver.c
AgeCommit message (Collapse)Author
2020-12-15Merge branch 'pci/misc'Bjorn Helgaas
- Update kernel-doc to match function prototypes (Mauro Carvalho Chehab) - Bounds-check "pci=resource_alignment=" requests (Bjorn Helgaas) - Fix integer overflow in "pci=resource_alignment=" requests (Colin Ian King) - Remove unused HAVE_PCI_SET_MWI definition (Heiner Kallweit) - Reduce pci_set_cacheline_size() message to debug level (Heiner Kallweit) * pci/misc: PCI: Reduce pci_set_cacheline_size() message to debug level PCI: Remove unused HAVE_PCI_SET_MWI PCI: Fix overflow in command-line resource alignment requests PCI: Bounds-check command-line resource alignment requests PCI: Fix kernel-doc markup # Conflicts: # drivers/pci/pci-driver.c
2020-11-30PCI: Fix kernel-doc markupMauro Carvalho Chehab
Update kernel-doc so the names in the doc match the prototypes. Link: https://lore.kernel.org/r/f19caf7a68f8365c8b573a42b4ac89ec21925c73.1603469755.git.mchehab+huawei@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-11-20PCI: Avoid duplicate IDs in driver dynamic IDs listZhenzhong Duan
When a device ID is written to /sys/bus/pci/drivers/.../new_id, we previously only checked the driver's static ID table for duplicates. Writing the same ID several times added it to the dynamic IDs list several times. This doesn't cause user-visible broken behavior, but remove_id_store() only removes one of the duplicate IDs, so if we add an ID several times, we would have to remove it the same number of times before it's completely gone. Fix it by calling pci_match_device(), which checks both dynamic and static IDs to avoid inserting duplicate IDs in dynamic IDs list. After fix, attempts to add an ID more than once cause an error: # echo "1af4 1041" > /sys/bus/pci/drivers/vfio-pci/new_id # echo "1af4 1041" > /sys/bus/pci/drivers/vfio-pci/new_id bash: echo: write error: File exists Link: https://lore.kernel.org/r/20201117054409.3428-3-zhenzhong.duan@gmail.com Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-11-20PCI: Move pci_match_device() ahead of new_id_store()Zhenzhong Duan
Move pci_match_device() and its dependencies (pci_match_id() and pci_device_id_any) ahead of new_id_store(). This is preparation work for calling pci_match_device() in new_id_store(). No functional changes. [bhelgaas: update function comments] Link: https://lore.kernel.org/r/20201117054409.3428-2-zhenzhong.duan@gmail.com Signed-off-by: Zhenzhong Duan <zhenzhong.duan@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-10-22Merge tag 'pci-v5.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
2020-10-06dma-mapping: move dma-debug.h to kernel/dma/Christoph Hellwig
Most of dma-debug.h is not required by anything outside of kernel/dma. Move the four declarations needed by dma-mappin.h or dma-ops providers into dma-mapping.h and dma-map-ops.h, and move the remainder of the file to kernel/dma/debug.h. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-29PCI/PM: Remove unused pcibios_pm_opsVaibhav Gupta
The "struct dev_pm_ops pcibios_pm_ops", declared in include/linux/pci.h and defined in drivers/pci/pci-driver.c, provided arch-specific hooks when a PCI device was doing a hibernate transition. 394216275c7d ("s390: remove broken hibernate / power management support") removed the last use of pcibios_pm_ops, so remove it completely. [bhelgaas: drop unused "error"] Link: https://lore.kernel.org/r/20200730194416.1029509-1-vaibhavgupta40@gmail.com Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-08PCI: Restrict probe functions to housekeeping CPUsAlex Belits
pci_call_probe() prevents the nesting of work_on_cpu() for a scenario where a VF device is probed from work_on_cpu() of the PF. Replace the cpumask used in pci_call_probe() from all online CPUs to only housekeeping CPUs. This is to ensure that there are no additional latency overheads caused due to the pinning of jobs on isolated CPUs. Signed-off-by: Alex Belits <abelits@marvell.com> Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lkml.kernel.org/r/20200625223443.2684-3-nitesh@redhat.com
2020-04-24PM: sleep: core: Rename dev_pm_smart_suspend_and_suspended()Rafael J. Wysocki
Because all callers of dev_pm_smart_suspend_and_suspended use it only for checking whether or not to skip driver suspend callbacks for a device, rename it to dev_pm_skip_suspend() in analogy with dev_pm_skip_resume(). No functional impact. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-24PM: sleep: core: Rename dev_pm_may_skip_resume()Rafael J. Wysocki
The name of dev_pm_may_skip_resume() may be easily confused with the power.may_skip_resume flag which is not checked by that function, so rename the former as dev_pm_skip_resume(). No functional impact. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-24PM: sleep: core: Rework the power.may_skip_resume handlingRafael J. Wysocki
Because the power.may_skip_resume device status bit is taken into account in combination with the DPM_FLAG_LEAVE_SUSPENDED driver flag, it can be set to 'true' for all devices in the "suspend" phase of a suspend-resume cycle, so do that. Then, neither the PM core nor the middle-layer (sybsystem) code handling it needs to set it to 'true' any more and it just has to be cleared if there is a reason to avoid skipping the "noirq" and "early" resume callbacks provided by the driver, so update the code in question accordingly. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2020-04-24PM: sleep: core: Do not skip callbacks in the resume phaseRafael J. Wysocki
The current code in device_resume_noirq() causes the entire early resume and resume phases of device suspend to be skipped for devices for which the noirq resume phase have been skipped (due to the LEAVE_SUSPENDED flag being set) on the premise that those devices should stay in runtime-suspend after system-wide resume. However, that may not be correct in two situations. First, the middle layer (subsystem) noirq resume callback may be missing for a given device, but its early resume callback may be present and it may need to do something even if it decides to skip the driver callback. Second, if the device's wakeup settings were adjusted in the suspend phase without resuming the device (that was in runtime suspend at that time), they most likely need to be adjusted again in the resume phase and so the driver callback in that phase needs to be run. For the above reason, modify the core to allow the middle layer ->resume_late callback to run even if its ->resume_noirq callback is missing (and the core has skipped the driver-level callback in that phase) and to allow all device callbacks to run in the resume phase. Also make the core set the PM-runtime status of devices with SMART_SUSPEND set whose resume callbacks are not skipped to "active" in the "noirq" resume phase and update the affected subsystems (PCI and ACPI) accordingly. After this change, middle-layer (subsystem) callbacks will always be invoked in all phases of system suspend and resume and driver callbacks will always run in the prepare, suspend, resume, and complete phases for all devices. For devices with SMART_SUSPEND set, driver callbacks will be skipped in the late and noirq phases of system suspend if those devices remain in runtime suspend in __device_suspend_late(). Driver callbacks will also be skipped for them during the noirq and early phases of the "thaw" transition related to hibernation in that case. Setting LEAVE_SUSPENDED means that the driver allows its callbacks to be skipped in the noirq and early phases of system resume, but some additional conditions need to be met for that to happen (among other things, the power.may_skip_resume flag needs to be set for the device during system suspend for the driver callbacks to be skipped during the subsequent resume transition). For all devices with SMART_SUSPEND set whose driver callbacks are invoked during system resume, the PM-runtime status will be set to "active" (by the core). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-20PCI/PM: Add missing link delays required by the PCIe specMika Westerberg
Currently Linux does not follow PCIe spec regarding the required delays after reset. A concrete example is a Thunderbolt add-in-card that consists of a PCIe switch and two PCIe endpoints: +-1b.0-[01-6b]----00.0-[02-6b]--+-00.0-[03]----00.0 TBT controller +-01.0-[04-36]-- DS hotplug port +-02.0-[37]----00.0 xHCI controller \-04.0-[38-6b]-- DS hotplug port The root port (1b.0) and the PCIe switch downstream ports are all PCIe Gen3 so they support 8GT/s link speeds. We wait for the PCIe hierarchy to enter D3cold (runtime): pcieport 0000:00:1b.0: power state changed by ACPI to D3cold When it wakes up from D3cold, according to the PCIe 5.0 section 5.8 the PCIe switch is put to reset and its power is re-applied. This means that we must follow the rules in PCIe 5.0 section 6.6.1. For the PCIe Gen3 ports we are dealing with here, the following applies: With a Downstream Port that supports Link speeds greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link training completes before sending a Configuration Request to the device immediately below that Port. Software can determine when Link training completes by polling the Data Link Layer Link Active bit or by setting up an associated interrupt (see Section 6.7.3.3). Translating this into the above topology we would need to do this (DLLLA stands for Data Link Layer Link Active): 0000:00:1b.0: wait for 100 ms after DLLLA is set before access to 0000:01:00.0 0000:02:00.0: wait for 100 ms after DLLLA is set before access to 0000:03:00.0 0000:02:02.0: wait for 100 ms after DLLLA is set before access to 0000:37:00.0 I've instrumented the kernel with some additional logging so we can see the actual delays performed: pcieport 0000:00:1b.0: power state changed by ACPI to D0 pcieport 0000:00:1b.0: waiting for D3cold delay of 100 ms pcieport 0000:00:1b.0: waiting for D3hot delay of 10 ms pcieport 0000:02:01.0: waiting for D3hot delay of 10 ms pcieport 0000:02:04.0: waiting for D3hot delay of 10 ms For the switch upstream port (01:00.0 reachable through 00:1b.0 root port) we wait for 100 ms but not taking into account the DLLLA requirement. We then wait 10 ms for D3hot -> D0 transition of the root port and the two downstream hotplug ports. This means that we deviate from what the spec requires. Performing the same check for system sleep (s2idle) transitions it turns out to be even worse. None of the mandatory delays are performed. If this would be S3 instead of s2idle then according to PCI FW spec 3.2 section 4.6.8. there is a specific _DSM that allows the OS to skip the delays but this platform does not provide the _DSM and does not go to S3 anyway so no firmware is involved that could already handle these delays. On this particular platform these delays are not actually needed because there is an additional delay as part of the ACPI power resource that is used to turn on power to the hierarchy but since that additional delay is not required by any of standards (PCIe, ACPI) it is not present in the Intel Ice Lake, for example where missing the mandatory delays causes pciehp to start tearing down the stack too early (links are not yet trained). Below is an example how it looks like when this happens: pcieport 0000:83:04.0: pciehp: Slot(4): Card not present pcieport 0000:87:04.0: PME# disabled pcieport 0000:83:04.0: pciehp: pciehp_unconfigure_device: domain:bus:dev = 0000:86:00 pcieport 0000:86:00.0: Refused to change power state, currently in D3 pcieport 0000:86:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x201ff) pcieport 0000:86:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0) ... There is also one reported case (see the bugzilla link below) where the missing delay causes xHCI on a Titan Ridge controller fail to runtime resume when USB-C dock is plugged. This does not involve pciehp but instead the PCI core fails to runtime resume the xHCI device: pcieport 0000:04:02.0: restoring config space at offset 0xc (was 0x10000, writing 0x10020) pcieport 0000:04:02.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100406) xhci_hcd 0000:39:00.0: Refused to change power state, currently in D3 xhci_hcd 0000:39:00.0: restoring config space at offset 0x3c (was 0xffffffff, writing 0x1ff) xhci_hcd 0000:39:00.0: restoring config space at offset 0x38 (was 0xffffffff, writing 0x0) ... Add a new function pci_bridge_wait_for_secondary_bus() that is called on PCI core resume and runtime resume paths accordingly if the bridge entered D3cold (and thus went through reset). This is second attempt to add the missing delays. The previous solution in c2bf1fc212f7 ("PCI: Add missing link delays required by the PCIe spec") was reverted because of two issues it caused: 1. One system become unresponsive after S3 resume due to PME service spinning in pcie_pme_work_fn(). The root port in question reports that the xHCI sent PME but the xHCI device itself does not have PME status set. The PME status bit is never cleared in the root port resulting the indefinite loop in pcie_pme_work_fn(). 2. Slows down resume if the root/downstream port does not support Data Link Layer Active Reporting because pcie_wait_for_link_delay() waits 1100 ms in that case. This version should avoid the above issues because we restrict the delay to happen only if the port went into D3cold. Link: https://lore.kernel.org/linux-pci/SL2P216MB01878BBCD75F21D882AEEA2880C60@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=203885 Link: https://lore.kernel.org/r/20191112091617.70282-3-mika.westerberg@linux.intel.com Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-20PCI/PM: Move power state update away from pci_power_up()Rafael J. Wysocki
Move the invocation of pci_update_current_state() from pci_power_up() to pci_pm_default_resume_early(), which is the only caller of that function. Preparatory change, no functional impact. Link: https://lore.kernel.org/r/37482337.udjOGdOKNb@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-11-20PCI/PM: Remove unused pci_driver.suspend_late() hookBjorn Helgaas
The struct pci_driver.suspend_late() hook is one of the legacy PCI power management callbacks, and there are no remaining users of it. Remove it. Link: https://lore.kernel.org/r/20191101204558.210235-7-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-20PCI/PM: Remove unused pci_driver.resume_early() hookBjorn Helgaas
The struct pci_driver.resume_early() hook is one of the legacy PCI power management callbacks, and there are no remaining users of it. Remove it. Link: https://lore.kernel.org/r/20191101204558.210235-6-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-20PCI/PM: Use pci_WARN() to include device informationBjorn Helgaas
Add and use pci_WARN() wrappers so warnings include device information. Link: https://lore.kernel.org/r/20191017212851.54237-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-20PCI/PM: Use PCI dev_printk() wrappers for consistencyBjorn Helgaas
Use the PCI dev_printk() wrappers for consistency with the rest of the PCI core. No functional change intended. Link: https://lore.kernel.org/r/20191017212851.54237-2-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-20PCI/PM: Make power management op coding style consistentBjorn Helgaas
Some of the power management ops use this style: struct device_driver *drv = dev->driver; if (drv && drv->pm && drv->pm->prepare(dev)) drv->pm->prepare(dev); while others use this: const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; if (pm && pm->runtime_resume) pm->runtime_resume(dev); Convert the first style to the second so they're all consistent. Remove local "error" variables when unnecessary. No functional change intended. Link: https://lore.kernel.org/r/20191014230016.240912-6-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-20PCI/PM: Run resume fixups before disabling wakeup eventsBjorn Helgaas
pci_pm_resume() and pci_pm_restore() call pci_pm_default_resume(), which runs resume fixups before disabling wakeup events: static void pci_pm_default_resume(struct pci_dev *pci_dev) { pci_fixup_device(pci_fixup_resume, pci_dev); pci_enable_wake(pci_dev, PCI_D0, false); } pci_pm_runtime_resume() does both of these, but in the opposite order: pci_enable_wake(pci_dev, PCI_D0, false); pci_fixup_device(pci_fixup_resume, pci_dev); We should always use the same ordering unless there's a reason to do otherwise. Change pci_pm_runtime_resume() to call pci_pm_default_resume() instead of open-coding this, so the fixups are always done before disabling wakeup events. pci_pm_default_resume() is called from pci_pm_runtime_resume(), which is under #ifdef CONFIG_PM. If SUSPEND and HIBERNATION are disabled, PM_SLEEP is disabled also, so move pci_pm_default_resume() from #ifdef CONFIG_PM_SLEEP to #ifdef CONFIG_PM. Link: https://lore.kernel.org/r/20191014230016.240912-5-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-20PCI/PM: Clear PCIe PME Status even for legacy power managementBjorn Helgaas
Previously, pci_pm_resume_noirq() cleared the PME Status bit in the Root Status register only if the device had no driver or the driver did not implement legacy power management. It should clear PME Status regardless of what sort of power management the driver supports, so do this before checking for legacy power management. This affects Root Ports and Root Complex Event Collectors, for which the usual driver is the PCIe portdrv, which implements new power management, so this change is just on principle, not to fix any actual defects. Fixes: a39bd851dccf ("PCI/PM: Clear PCIe PME Status bit in core, not PCIe port driver") Link: https://lore.kernel.org/r/20191014230016.240912-4-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-11-20PCI/PM: Always return devices to D0 when thawingDexuan Cui
pci_pm_thaw_noirq() is supposed to return the device to D0 and restore its configuration registers, but previously it only did that for devices whose drivers implemented the new power management ops. Hibernation, e.g., via "echo disk > /sys/power/state", involves freezing devices, creating a hibernation image, thawing devices, writing the image, and powering off. The fact that thawing did not return devices with legacy power management to D0 caused errors, e.g., in this path: pci_pm_thaw_noirq if (pci_has_legacy_pm_support(pci_dev)) # true for Mellanox VF driver return pci_legacy_resume_early(dev) # ... legacy PM skips the rest pci_set_power_state(pci_dev, PCI_D0) pci_restore_state(pci_dev) pci_pm_thaw if (pci_has_legacy_pm_support(pci_dev)) pci_legacy_resume drv->resume mlx4_resume ... pci_enable_msix_range ... if (dev->current_state != PCI_D0) # <--- return -EINVAL; which caused these warnings: mlx4_core a6d1:00:02.0: INTx is not supported in multi-function mode, aborting PM: dpm_run_callback(): pci_pm_thaw+0x0/0xd7 returns -95 PM: Device a6d1:00:02.0 failed to thaw: error -95 Return devices to D0 and restore config registers for all devices, not just those whose drivers support new power management. [bhelgaas: also call pci_restore_state() before pci_legacy_resume_early(), update comment, add stable tag, commit log] Link: https://lore.kernel.org/r/KU1P153MB016637CAEAD346F0AA8E3801BFAD0@KU1P153MB0166.APCP153.PROD.OUTLOOK.COM Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org # v4.13+
2019-07-15Merge tag 'pci-v5.3-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when `make tools/pci_install` PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ...
2019-07-08Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM: sleep: Drop dev_pm_skip_next_resume_phases() ACPI: PM: Drop unused function and function header ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS ACPI: PM: Simplify and fix PM domain hibernation callbacks PCI: PM: Simplify bus-level hibernation callbacks PM: ACPI/PCI: Resume all devices during hibernation kernel: power: swap: use kzalloc() instead of kmalloc() followed by memset() PM: sleep: Update struct wakeup_source documentation drivers: base: power: remove wakeup_sources_stats_dentry variable PM: suspend: Rename pm_suspend_via_s2idle() PM: sleep: Show how long dpm_suspend_start() and dpm_suspend_end() take PM: hibernate: powerpc: Expose pfn_is_nosave() prototype
2019-07-03PCI: PM: Simplify bus-level hibernation callbacksRafael J. Wysocki
After a previous change causing all runtime-suspended PCI devices to be resumed before creating a snapshot image of memory during hibernation, it is not necessary to worry about the case in which them might be left in runtime-suspend any more, so get rid of the code related to that from bus-level PCI hibernation callbacks. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-07-03PM: ACPI/PCI: Resume all devices during hibernationRafael J. Wysocki
Both the PCI bus type and the ACPI PM domain avoid resuming runtime-suspended devices with DPM_FLAG_SMART_SUSPEND set during hibernation (before creating the snapshot image of system memory), but that turns out to be a mistake. It leads to functional issues and adds complexity that's hard to justify. For this reason, resume all runtime-suspended PCI devices and all devices in the ACPI PM domains before creating a snapshot image of system memory during hibernation. Fixes: 05087360fd7a (ACPI / PM: Take SMART_SUSPEND driver flag into account) Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account) Link: https://lore.kernel.org/linux-acpi/917d4399-2e22-67b1-9d54-808561f9083f@uwyo.edu/T/#maf065fe6e4974f2a9d79f332ab99dfaba635f64c Reported-by: Robert R. Howell <RHowell@uwyo.edu> Tested-by: Robert R. Howell <RHowell@uwyo.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-06-30Merge back PCI power management material for v5.3.Rafael J. Wysocki
2019-06-27PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()Rafael J. Wysocki
In pci_pm_complete() there are checks to decide whether or not to resume devices that were left in runtime-suspend during the preceding system-wide transition into a sleep state. They involve checking the current power state of the device and comparing it with the power state of it set before the preceding system-wide transition, but the platform component of the device's power state is not handled correctly in there. Namely, on platforms with ACPI, the device power state information needs to be updated with care, so that the reference counters of power resources used by the device (if any) are set to ensure that the refreshed power state of it will be maintained going forward. To that end, introduce a new ->refresh_state() platform PM callback for PCI devices, for asking the platform to refresh the device power state data and ensure that the corresponding power state will be maintained going forward, make it invoke acpi_device_update_power() (for devices with ACPI PM) on platforms with ACPI and make pci_pm_complete() use it, through a new pci_refresh_power_state() wrapper function. Fixes: a0d2a959d3da (PCI: Avoid unnecessary resume after direct-complete) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-26PCI: PM: Avoid skipping bus-level PM on platforms without ACPIRafael J. Wysocki
There are platforms that do not call pm_set_suspend_via_firmware(), so pm_suspend_via_firmware() returns 'false' on them, but the power states of PCI devices (PCIe ports in particular) are changed as a result of powering down core platform components during system-wide suspend. Thus the pm_suspend_via_firmware() checks in pci_pm_suspend_noirq() and pci_pm_resume_noirq() introduced by commit 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to- idle") are not sufficient to determine that devices left in D0 during suspend will remain in D0 during resume and so the bus-level power management can be skipped for them. For this reason, introduce a new global suspend flag, PM_SUSPEND_FLAG_NO_PLATFORM, set it for suspend-to-idle only and replace the pm_suspend_via_firmware() checks mentioned above with checks against this flag. Fixes: 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-idle") Reported-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-24Merge back PCI power management material for v5.3.Rafael J. Wysocki
2019-06-17PCI: PM: Replace pci_dev_keep_suspended() with two functionsRafael J. Wysocki
The code in pci_dev_keep_suspended() is relatively hard to follow due to the negative checks in it and in its callers and the function has a possible side-effect (disabling the PME) which doesn't really match its role. For this reason, move the PME disabling from pci_dev_keep_suspended() to a separate function and change the semantics (and name) of the rest of it, so that 'true' is returned when the device needs to be resumed (and not the other way around). Change the callers of pci_dev_keep_suspended() accordingly. While at it, make the code flow in pci_pm_poweroff() reflect the pci_pm_suspend() more closely to avoid arbitrary differences between them. This is a cosmetic change with no intention to alter behavior. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-14PCI: PM: Skip devices in D0 for suspend-to-idleRafael J. Wysocki
Commit d491f2b75237 ("PCI: PM: Avoid possible suspend-to-idle issue") attempted to avoid a problem with devices whose drivers want them to stay in D0 over suspend-to-idle and resume, but it did not go as far as it should with that. Namely, first of all, the power state of a PCI bridge with a downstream device in D0 must be D0 (based on the PCI PM spec r1.2, sec 6, table 6-1, if the bridge is not in D0, there can be no PCI transactions on its secondary bus), but that is not actively enforced during system-wide PM transitions, so use the skip_bus_pm flag introduced by commit d491f2b75237 for that. Second, the configuration of devices left in D0 (whatever the reason) during suspend-to-idle need not be changed and attempting to put them into D0 again by force is pointless, so explicitly avoid doing that. Fixes: d491f2b75237 ("PCI: PM: Avoid possible suspend-to-idle issue") Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
2019-06-13PCI: Always allow probing with driver_overrideAlex Williamson
Commit 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") introduced the sriov_drivers_autoprobe attribute which allows users to prevent the kernel from automatically probing a driver for new VFs as they are created. This allows VFs to be spawned without automatically binding the new device to a host driver, such as in cases where the user intends to use the device only with a meta driver like vfio-pci. However, the current implementation prevents any use of drivers_probe with the VF while sriov_drivers_autoprobe=0. This blocks the now current general practice of setting driver_override followed by using drivers_probe to bind a device to a specified driver. The kernel never automatically sets a driver_override therefore it seems we can assume a driver_override reflects the intent of the user. Also, probing a device using a driver_override match seems outside the scope of the 'auto' part of sriov_drivers_autoprobe. Therefore, let's allow driver_override matches regardless of sriov_drivers_autoprobe, which we can do by simply testing if a driver_override is set for a device as a 'can probe' condition. Fixes: 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") Link: https://lore.kernel.org/lkml/155742996741.21878.569845487290798703.stgit@gimli.home Link: https://lore.kernel.org/linux-pci/155672991496.20698.4279330795743262888.stgit@gimli.home/T/#u Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-30PCI: Return error if cannot probe VFAlex Williamson
Commit 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") allows the user to specify that drivers for VFs of a PF should not be probed, but it actually causes pci_device_probe() to return success back to the driver core in this case. Therefore by all sysfs appearances the device is bound to a driver, the driver link from the device exists as does the device link back from the driver, yet the driver's probe function is never called on the device. We also fail to do any sort of cleanup when we're prohibited from probing the device, the IRQ setup remains in place and we even hold a device reference. Instead, abort with errno before any setup or references are taken when pci_device_can_probe() prevents us from trying to probe the device. Link: https://lore.kernel.org/lkml/155672991496.20698.4279330795743262888.stgit@gimli.home Fixes: 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-27PCI: PM: Avoid possible suspend-to-idle issueRafael J. Wysocki
If a PCI driver leaves the device handled by it in D0 and calls pci_save_state() on the device in its ->suspend() or ->suspend_late() callback, it can expect the device to stay in D0 over the whole s2idle cycle. However, that may not be the case if there is a spurious wakeup while the system is suspended, because in that case pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq() which calls pci_restore_state(), via pci_pm_default_resume_early(), so state_saved is cleared and the second iteration of pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which may change the power state of the device. To avoid that, add a new internal flag, skip_bus_pm, that will be set by pci_pm_suspend_noirq() when it runs for the first time during the given system suspend-resume cycle if the state of the device has been saved already and the device is still in D0. Setting that flag will cause the next iterations of pci_pm_suspend_noirq() to set state_saved for pci_pm_resume_noirq(), so that it always restores the device state from the originally saved data, and avoid calling pci_prepare_to_sleep() for the device. Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-04-09treewide: Switch printk users from %pf and %pF to %ps and %pS, respectivelySakari Ailus
%pF and %pf are functionally equivalent to %pS and %ps conversion specifiers. The former are deprecated, therefore switch the current users to use the preferred variant. The changes have been produced by the following command: git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \ while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done And verifying the result. Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: linux-arm-kernel@lists.infradead.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: xen-devel@lists.xenproject.org Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-nvdimm@lists.01.org Cc: linux-pci@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-btrfs@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: linux-mm@kvack.org Cc: ceph-devel@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: David Sterba <dsterba@suse.com> (for btrfs) Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c) Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci) Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-02-08PCI: Clean up usage of __u32 typeLogan Gunthorpe
The double underscore types are meant for compatibility in userspace headers which does not apply here. Therefore, change to use the standard no-underscore types. The origin of the double underscore types dates back to before the git era so I was not able to find a commit to see the original justification. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-01-05Merge tag 'pci-v4.21-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2018-12-15PCI: Remove unused attr variable in pci_dma_configureNathan Chancellor
Clang warns: drivers/pci/pci-driver.c:1603:21: error: unused variable 'attr' [-Werror,-Wunused-variable] Commit e5361ca29f2f ("ACPI / scan: Refactor _CCA enforcement") removed attr's use and replaced it with its assigned value so it is no longer needed. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-13ACPI / scan: Refactor _CCA enforcementRobin Murphy
Rather than checking the DMA attribute at each callsite, just pass it through for acpi_dma_configure() to handle directly. That can then deal with the relatively exceptional DEV_DMA_NOT_SUPPORTED case by explicitly installing dummy DMA ops instead of just skipping setup entirely. This will then free up the dev->dma_ops == NULL case for some valuable fastpath optimisations. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-12PCI / PM: Allow runtime PM without callback functionsJarkko Nikula
a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM") nullified the runtime PM suspend/resume callback pointers while keeping the runtime PM enabled. This caused the SMBus PCI device to stay in D0 with /sys/devices/.../power/runtime_status showing "error" when the runtime PM framework attempted to autosuspend the device. This is due to PCI bus runtime PM, which checks for driver runtime PM callbacks and returns -ENOSYS if they are not set. Since i2c-i801.c doesn't need to do anything device-specific for runtime PM, Jean Delvare proposed this be fixed in the PCI core rather than adding dummy runtime PM callback functions in the PCI drivers. Change pci_pm_runtime_suspend()/pci_pm_runtime_resume() so they allow changing the PCI device power state during runtime PM transitions even if the driver supplies no runtime PM callbacks. This fixes the runtime PM regression on i2c-i801.c. It is not obvious why the code previously required the runtime PM callbacks. The test has been there since the code was introduced by 6cbf82148ff2 ("PCI PM: Run-time callbacks for PCI bus type"). On the other hand, a similar change was done to generic runtime PM callbacks in 05aa55dddb9e ("PM / Runtime: Lenient generic runtime pm callbacks"). Fixes: a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM") Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: stable@vger.kernel.org # v4.18+
2018-08-15Merge branch 'pci/misc'Bjorn Helgaas
- Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) * pci/misc: PCI: Limit config space size for Netronome NFP5000 PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Unify PCI and normal DMA direction definitions PCI: Use IRQF_ONESHOT if pci_request_irq() called with no handler PCI: Call dma_debug_add_bus() for pci_bus_type from PCI core PCI: Mark fall-through switch cases before enabling -Wimplicit-fallthrough # Conflicts: # drivers/pci/hotplug/pciehp_ctrl.c
2018-07-30PCI: Call dma_debug_add_bus() for pci_bus_type from PCI coreChristoph Hellwig
There is nothing arch-specific about PCI or dma-debug, so call dma_debug_add_bus() from the PCI core just after registering the bus type. Most of dma-debug is already generic; this just adds reporting of pending dma-allocations on driver unload for arches other than powerpc, sh, and x86. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
2018-06-29PCI/IOV: Reset total_VFs limit after detaching PF driverJakub Kicinski
The TotalVFs register in the SR-IOV capability is the hardware limit on the number of VFs. A PF driver can limit the number of VFs further with pci_sriov_set_totalvfs(). When the PF driver is removed, reset any VF limit that was imposed by the driver because that limit may not apply to other drivers. Before 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0"), pci_sriov_set_totalvfs(pdev, 0) meant "we can enable TotalVFs virtual functions", and the nfp driver used that to remove the VF limit when the driver unloads. 8d85a7a4f2c9 broke that because instead of removing the VF limit, pci_sriov_set_totalvfs(pdev, 0) actually sets the limit to zero, and that limit persists even if another driver is loaded. We could fix that by making the nfp driver reset the limit when it unloads, but it seems more robust to do it in the PCI core instead of relying on the driver. The regression scenario is: nfp_pci_probe (driver 1) ... nfp_pci_remove pci_sriov_set_totalvfs(pf->pdev, 0) # limits VFs to 0 ... nfp_pci_probe (driver 2) nfp_rtsym_read_le("nfd_vf_cfg_max_vfs") # no VF limit from firmware Now driver 2 is broken because the VF limit is still 0 from driver 1. Fixes: 8d85a7a4f2c9 ("PCI/IOV: Allow PF drivers to limit total_VFs to 0") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> [bhelgaas: changelog, rename functions] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-07Merge tag 'pci-v4.18-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...
2018-06-05Merge tag 'pm-4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include a significant update of the generic power domains (genpd) and Operating Performance Points (OPP) frameworks, mostly related to the introduction of power domain performance levels, cpufreq updates (new driver for Qualcomm Kryo processors, updates of the existing drivers, some core fixes, schedutil governor improvements), PCI power management fixes, ACPI workaround for EC-based wakeup events handling on resume from suspend-to-idle, and major updates of the turbostat and pm-graph utilities. Specifics: - Introduce power domain performance levels into the the generic power domains (genpd) and Operating Performance Points (OPP) frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter). - Fix two issues in the runtime PM framework related to the initialization and removal of devices using device links (Ulf Hansson). - Clean up the initialization of drivers for devices in PM domains (Ulf Hansson, Geert Uytterhoeven). - Fix a cpufreq core issue related to the policy sysfs interface causing CPU online to fail for CPUs sharing one cpufreq policy in some situations (Tao Wang). - Make it possible to use platform-specific suspend/resume hooks in the cpufreq-dt driver and make the Armada 37xx DVFS use that feature (Viresh Kumar, Miquel Raynal). - Optimize policy transition notifications in cpufreq (Viresh Kumar). - Improve the iowait boost mechanism in the schedutil cpufreq governor (Patrick Bellasi). - Improve the handling of deferred frequency updates in the schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki, Viresh Kumar). - Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin). - Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh Kumar). - Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set and update stale comments in the PCI core PM code (Rafael Wysocki). - Work around an issue related to the handling of EC-based wakeup events in the ACPI PM core during resume from suspend-to-idle if the EC has been put into the low-power mode (Rafael Wysocki). - Improve the handling of wakeup source objects in the PM core (Doug Berger, Mahendran Ganesh, Rafael Wysocki). - Update the driver core to prevent deferred probe from breaking suspend/resume ordering (Feng Kan). - Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael Wysocki). - Make the core suspend/resume code and cpufreq support the RT patch (Sebastian Andrzej Siewior, Thomas Gleixner). - Consolidate the PM QoS handling in cpuidle governors (Rafael Wysocki). - Fix a possible crash in the hibernation core (Tetsuo Handa). - Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Update the turbostat utility (fixes, cleanups, new CPU IDs, new command line options, built-in "Low Power Idle" counters support, new POLL and POLL% columns) and add an entry for it to MAINTAINERS (Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner, Prarit Bhargava, Srinivas Pandruvada). - Update the pm-graph to version 5.1 (Todd Brandt). - Update the intel_pstate_tracer utility (Doug Smythies)" * tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits) tools/power turbostat: update version number tools/power turbostat: Add Node in output tools/power turbostat: add node information into turbostat calculations tools/power turbostat: remove num_ from cpu_topology struct tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node tools/power turbostat: track thread ID in cpu_topology tools/power turbostat: Calculate additional node information for a package tools/power turbostat: Fix node and siblings lookup data tools/power turbostat: set max_num_cpus equal to the cpumask length tools/power turbostat: if --num_iterations, print for specific number of iterations tools/power turbostat: Add Cannon Lake support tools/power turbostat: delete duplicate #defines x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines tools/power turbostat: add POLL and POLL% column tools/power turbostat: Fix --hide Pk%pc10 tools/power turbostat: Build-in "Low Power Idle" counters support tools/power turbostat: Don't make man pages executable tools/power turbostat: remove blank lines tools/power turbostat: a small C-states dump readability immprovement ...
2018-05-24PCI / PM: Do not clear state_saved for devices that remain suspendedRafael J. Wysocki
The state_saved flag should not be cleared in pci_pm_suspend() if the given device is going to remain suspended, or the device's config space will not be restored properly during the subsequent resume. Namely, if the device is going to stay in suspend, both the late and noirq callbacks return early for it, so if its state_saved flag is cleared in pci_pm_suspend(), it will remain unset throughout the remaining part of suspend and resume and pci_restore_state() called for the device going forward will return without doing anything. For this reason, change pci_pm_suspend() to only clear state_saved if the given device is not going to remain suspended. [This is analogous to what commit ae860a19f37c (PCI / PM: Do not clear state_saved in pci_pm_freeze() when smart suspend is set) did for hibernation.] Fixes: c4b65157aeef (PCI / PM: Take SMART_SUSPEND driver flag into account) Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-17PCI/AER: Factor out error reporting to drivers/pci/pcie/err.cOza Pawandeep
Move the error reporting callbacks from aerdrv_core.c to err.c, where they can be used by DPC in addition to AER. As part of aerdrv_core.c, these callbacks were built under CONFIG_PCIEAER. Moving them to the new err.c means they will now be built under CONFIG_PCIEPORTBUS, so adjust the definition of pci_uevent_ers() to match. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: in reset_link(), initialize "driver" even if CONFIG_PCIEAER is unset, update pci_uevent_ers() #ifdef wrapper] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-03drivers: remove force dma flag from busesChristoph Hellwig
With each bus implementing its own DMA configuration callback, there is no need for bus to explicitly set the force_dma flag. Modify the of_dma_configure function to accept an input parameter which specifies if implicit DMA configuration is required when it is not described by the firmware. Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts Reviewed-by: Rob Herring <robh@kernel.org> [hch: tweaked the changelog a bit] Signed-off-by: Christoph Hellwig <hch@lst.de>