summaryrefslogtreecommitdiff
path: root/drivers/regulator
AgeCommit message (Collapse)Author
2021-11-18regulator: s5m8767: do not use reset value as DVS voltage if GPIO DVS is ↵Krzysztof Kozlowski
disabled commit b16bef60a9112b1e6daf3afd16484eb06e7ce792 upstream. The driver and its bindings, before commit 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") were requiring to provide at least one safe/default voltage for DVS registers if DVS GPIO is not being enabled. IOW, if s5m8767,pmic-buck2-uses-gpio-dvs is missing, the s5m8767,pmic-buck2-dvs-voltage should still be present and contain one voltage. This requirement was coming from driver behavior matching this condition (none of DVS GPIO is enabled): it was always initializing the DVS selector pins to 0 and keeping the DVS enable setting at reset value (enabled). Therefore if none of DVS GPIO is enabled in devicetree, driver was configuring the first DVS voltage for buck[234]. Mentioned commit 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") broke it because DVS voltage won't be parsed from devicetree if DVS GPIO is not enabled. After the change, driver will configure bucks to use the register reset value as voltage which might have unpleasant effects. Fix this by relaxing the bindings constrain: if DVS GPIO is not enabled in devicetree (therefore DVS voltage is also not parsed), explicitly disable it. Cc: <stable@vger.kernel.org> Fixes: 04f9f068a619 ("regulator: s5m8767: Modify parsing method of the voltage table of buck2/3/4") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Rob Herring <robh@kernel.org> Message-Id: <20211008113723.134648-2-krzysztof.kozlowski@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-15regulator: vctrl: Avoid lockdep warning in enable/disable opsChen-Yu Tsai
[ Upstream commit 21e39809fd7c4b8ff3662f23e0168e87594c8ca8 ] vctrl_enable() and vctrl_disable() call regulator_enable() and regulator_disable(), respectively. However, vctrl_* are regulator ops and should not be calling the locked regulator APIs. Doing so results in a lockdep warning. Instead of exporting more internal regulator ops, model the ctrl supply as an actual supply to vctrl-regulator. At probe time this driver still needs to use the consumer API to fetch its constraints, but otherwise lets the regulator core handle the upstream supply for it. The enable/disable/is_enabled ops are not removed, but now only track state internally. This preserves the original behavior with the ops being available, but one could argue that the original behavior was already incorrect: the internal state would not match the upstream supply if that supply had another consumer that enabled the supply, while vctrl-regulator was not enabled. The lockdep warning is as follows: WARNING: possible circular locking dependency detected 5.14.0-rc6 #2 Not tainted ------------------------------------------------------ swapper/0/1 is trying to acquire lock: ffffffc011306d00 (regulator_list_mutex){+.+.}-{3:3}, at: regulator_lock_dependent (arch/arm64/include/asm/current.h:19 include/linux/ww_mutex.h:111 drivers/regulator/core.c:329) but task is already holding lock: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at: regulator_lock_recursive (drivers/regulator/core.c:156 drivers/regulator/core.c:263) which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (regulator_ww_class_mutex){+.+.}-{3:3}: __mutex_lock_common (include/asm-generic/atomic-instrumented.h:606 include/asm-generic/atomic-long.h:29 kernel/locking/mutex.c:103 kernel/locking/mutex.c:144 kernel/locking/mutex.c:963) ww_mutex_lock (kernel/locking/mutex.c:1199) regulator_lock_recursive (drivers/regulator/core.c:156 drivers/regulator/core.c:263) regulator_lock_dependent (drivers/regulator/core.c:343) regulator_enable (drivers/regulator/core.c:2808) set_machine_constraints (drivers/regulator/core.c:1536) regulator_register (drivers/regulator/core.c:5486) devm_regulator_register (drivers/regulator/devres.c:196) reg_fixed_voltage_probe (drivers/regulator/fixed.c:289) platform_probe (drivers/base/platform.c:1427) [...] -> #1 (regulator_ww_class_acquire){+.+.}-{0:0}: regulator_lock_dependent (include/linux/ww_mutex.h:129 drivers/regulator/core.c:329) regulator_enable (drivers/regulator/core.c:2808) set_machine_constraints (drivers/regulator/core.c:1536) regulator_register (drivers/regulator/core.c:5486) devm_regulator_register (drivers/regulator/devres.c:196) reg_fixed_voltage_probe (drivers/regulator/fixed.c:289) [...] -> #0 (regulator_list_mutex){+.+.}-{3:3}: __lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4) kernel/locking/lockdep.c:3174 (discriminator 4) kernel/locking/lockdep.c:3789 (discriminator 4) kernel/locking/lockdep.c:5015 (discriminator 4)) lock_acquire (arch/arm64/include/asm/percpu.h:39 kernel/locking/lockdep.c:438 kernel/locking/lockdep.c:5627) __mutex_lock_common (include/asm-generic/atomic-instrumented.h:606 include/asm-generic/atomic-long.h:29 kernel/locking/mutex.c:103 kernel/locking/mutex.c:144 kernel/locking/mutex.c:963) mutex_lock_nested (kernel/locking/mutex.c:1125) regulator_lock_dependent (arch/arm64/include/asm/current.h:19 include/linux/ww_mutex.h:111 drivers/regulator/core.c:329) regulator_enable (drivers/regulator/core.c:2808) vctrl_enable (drivers/regulator/vctrl-regulator.c:400) _regulator_do_enable (drivers/regulator/core.c:2617) _regulator_enable (drivers/regulator/core.c:2764) regulator_enable (drivers/regulator/core.c:308 drivers/regulator/core.c:2809) _set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072) dev_pm_opp_set_rate (drivers/opp/core.c:1164) set_target (drivers/cpufreq/cpufreq-dt.c:62) __cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216 drivers/cpufreq/cpufreq.c:2271) cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2)) cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563) subsys_interface_register (drivers/base/bus.c:?) cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819) dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344) [...] other info that might help us debug this: Chain exists of: regulator_list_mutex --> regulator_ww_class_acquire --> regulator_ww_class_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(regulator_ww_class_mutex); lock(regulator_ww_class_acquire); lock(regulator_ww_class_mutex); lock(regulator_list_mutex); *** DEADLOCK *** 6 locks held by swapper/0/1: #0: ffffff8002d32188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock (drivers/base/dd.c:1030) #1: ffffffc0111a0520 (cpu_hotplug_lock){++++}-{0:0}, at: cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2792 (discriminator 2)) #2: ffffff8002a8d918 (subsys mutex#9){+.+.}-{3:3}, at: subsys_interface_register (drivers/base/bus.c:1033) #3: ffffff800341bb90 (&policy->rwsem){+.+.}-{3:3}, at: cpufreq_online (include/linux/bitmap.h:285 include/linux/cpumask.h:405 drivers/cpufreq/cpufreq.c:1399) #4: ffffffc011f0b7b8 (regulator_ww_class_acquire){+.+.}-{0:0}, at: regulator_enable (drivers/regulator/core.c:2808) #5: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at: regulator_lock_recursive (drivers/regulator/core.c:156 drivers/regulator/core.c:263) stack backtrace: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc6 #2 7c8f8996d021ed0f65271e6aeebf7999de74a9fa Hardware name: Google Scarlet (DT) Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:161) show_stack (arch/arm64/kernel/stacktrace.c:218) dump_stack_lvl (lib/dump_stack.c:106 (discriminator 2)) dump_stack (lib/dump_stack.c:113) print_circular_bug (kernel/locking/lockdep.c:?) check_noncircular (kernel/locking/lockdep.c:?) __lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4) kernel/locking/lockdep.c:3174 (discriminator 4) kernel/locking/lockdep.c:3789 (discriminator 4) kernel/locking/lockdep.c:5015 (discriminator 4)) lock_acquire (arch/arm64/include/asm/percpu.h:39 kernel/locking/lockdep.c:438 kernel/locking/lockdep.c:5627) __mutex_lock_common (include/asm-generic/atomic-instrumented.h:606 include/asm-generic/atomic-long.h:29 kernel/locking/mutex.c:103 kernel/locking/mutex.c:144 kernel/locking/mutex.c:963) mutex_lock_nested (kernel/locking/mutex.c:1125) regulator_lock_dependent (arch/arm64/include/asm/current.h:19 include/linux/ww_mutex.h:111 drivers/regulator/core.c:329) regulator_enable (drivers/regulator/core.c:2808) vctrl_enable (drivers/regulator/vctrl-regulator.c:400) _regulator_do_enable (drivers/regulator/core.c:2617) _regulator_enable (drivers/regulator/core.c:2764) regulator_enable (drivers/regulator/core.c:308 drivers/regulator/core.c:2809) _set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072) dev_pm_opp_set_rate (drivers/opp/core.c:1164) set_target (drivers/cpufreq/cpufreq-dt.c:62) __cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216 drivers/cpufreq/cpufreq.c:2271) cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2)) cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563) subsys_interface_register (drivers/base/bus.c:?) cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819) dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344) [...] Reported-by: Brian Norris <briannorris@chromium.org> Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking") Fixes: e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20210825033704.3307263-3-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15regulator: vctrl: Use locked regulator_get_voltage in probe pathChen-Yu Tsai
[ Upstream commit 98e47570ba985f2310586c80409238200fa3170f ] In commit e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage"), all calls to get/set the voltage of the control regulator were switched to unlocked versions to avoid deadlocks. However, the call in the probe path is done without regulator locks held. In this case the locked version should be used. Switch back to the locked regulator_get_voltage() in the probe path to avoid any mishaps. Fixes: e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20210825033704.3307263-2-wenst@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15regulator: tps65910: Silence deferred probe errorDmitry Osipenko
[ Upstream commit e301df76472cc929fa62d923bc3892931f7ad71d ] The TPS65910 regulator now gets a deferred probe until supply regulator is registered. Silence noisy error message about the deferred probe. Reported-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210705201211.16082-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-08regulator: rtmv20: Fix wrong mask for strobe-polarity-highChiYuan Huang
[ Upstream commit 2b6a761be079f9fa8abf3157b5679a6f38885db4 ] Fix wrong mask for strobe-polarity-high. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> In-reply-to: <CAFRkauB=0KwrJW19nJTTagdHhBR=V2R8YFWG3R3oVXt=rBRsqw@mail.gmail.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/1624723112-26653-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28regulator: hi6421: Fix getting wrong drvdataAxel Lin
[ Upstream commit 1c73daee4bf30ccdff5e86dc400daa6f74735da5 ] Since config.dev = pdev->dev.parent in current code, so dev_get_drvdata(rdev->dev.parent) call in hi6421_regulator_enable returns the drvdata of the mfd device rather than the regulator. Fix it. This was broken while converting to use simplified DT parsing because the config.dev changed from pdev->dev to pdev->dev.parent for parsing the parent's of_node. Fixes: 29dc269a85ef ("regulator: hi6421: Convert to use simplified DT parsing") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210630095959.2411543-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28regulator: hi6421: Use correct variable type for regmap api val argumentAxel Lin
[ Upstream commit ae60e6a9d24e89a74e2512204ad04de94921bdd2 ] Use unsigned int instead of u32 for regmap_read/regmap_update_bits val argument. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210619124133.4096683-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14regulator: hi655x: Fix pass wrong pointer to config.driver_dataAxel Lin
[ Upstream commit 61eb1b24f9e4f4e0725aa5f8164a932c933f3339 ] Current code sets config.driver_data to a zero initialized regulator which is obviously wrong. Fix it. Fixes: 4618119b9be5 ("regulator: hi655x: enable regulator for hi655x PMIC") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210620132715.60215-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14regulator: fan53880: Fix vsel_mask setting for FAN53880_BUCKAxel Lin
[ Upstream commit 2e11737a772b95c6587df73f216eec1762431432 ] According to the datasheet: REGISTER DETAILS − 0x02 BUCK, BUCK_OUT is BIT0 ~ BIT7. So vsel_mask for FAN53880_BUCK should be 0xFF. Fixes: e6dea51e2d41 ("regulator: fan53880: Add initial support") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210607142907.1599905-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14regulator: da9052: Ensure enough delay time for .set_voltage_time_selAxel Lin
[ Upstream commit a336dc8f683e5be794186b5643cd34cb28dd2c53 ] Use DIV_ROUND_UP to prevent truncation by integer division issue. This ensures we return enough delay time. Also fix returning negative value when new_sel < old_sel. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210618141412.4014912-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14regulator: mt6358: Fix vdram2 .vsel_maskHsin-Hsiung Wang
[ Upstream commit 50c9462edcbf900f3d5097ca3ad60171346124de ] The valid vsel value are 0 and 12, so the .vsel_mask should be 0xf. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/1624424169-510-1-git-send-email-hsin-hsiung.wang@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14regulator: uniphier: Add missing MODULE_DEVICE_TABLEZou Wei
[ Upstream commit d019f38a1af3c6015cde6a47951a3ec43beeed80 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620705198-104566-1-git-send-email-zou_wei@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23regulator: rt4801: Fix NULL pointer dereference if priv->enable_gpios is NULLAxel Lin
[ Upstream commit cb2381cbecb81a8893b2d1e1af29bc2e5531df27 ] devm_gpiod_get_array_optional may return NULL if no GPIO was assigned. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210603094944.1114156-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23regulator: rtmv20: Fix to make regcache value first reading back from HWChiYuan Huang
[ Upstream commit 46639a5e684edd0b80ae9dff220f193feb356277 ] - Fix to make regcache value first reading back from HW. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1622542155-6373-1-git-send-email-u0084500@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23regulator: cros-ec: Fix error code in dev_err messageAxel Lin
[ Upstream commit 3d681804efcb6e5d8089a433402e19179347d7ae ] Show proper error code instead of 0. Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20210512075824.620580-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16regulator: rtmv20: Fix .set_current_limit/.get_current_limit callbacksAxel Lin
commit 86ab21cc39e6b99b7065ab9008c90bec5dec535a upstream. Current code does not set .curr_table and .n_linear_ranges settings, so it cannot use the regulator_get/set_current_limit_regmap helpers. If we setup the curr_table, it will has 200 entries. Implement customized .set_current_limit/.get_current_limit callbacks instead. Fixes: b8c054a5eaf0 ("regulator: rtmv20: Adds support for Richtek RTMV20 load switch regulator") Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/20210530124101.477727-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16regulator: fan53880: Fix missing n_voltages settingAxel Lin
commit 34991ee96fd8477479dd15adadceb6b28b30d9b0 upstream. Fixes: e6dea51e2d41 ("regulator: fan53880: Add initial support") Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Christoph Fritz <chf.fritz@googlemail.com> Link: https://lore.kernel.org/r/20210517105325.1227393-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16regulator: bd718x7: Fix the BUCK7 voltage setting on BD71837Matti Vaittinen
commit bc537e65b09a05923f98a31920d1ab170e648dba upstream. Changing the BD71837 voltages for other regulators except the first 4 BUCKs should be forbidden when the regulator is enabled. There may be out-of-spec voltage spikes if the voltage of these "non DVS" bucks is changed when enabled. This restriction was accidentally removed when the LDO voltage change was allowed for BD71847. (It was not noticed that the BD71837 BUCK7 used same voltage setting function as LDOs). Additionally this bug causes incorrect voltage monitoring register access. The voltage change function accidentally used for bd71837 BUCK7 is intended to only handle LDO voltage changes. A BD71847 LDO specific voltage monitoring disabling code gets executed on BD71837 and register offsets are wrongly calculated as regulator is assumed to be an LDO. Prevent the BD71837 BUCK7 voltage change when BUCK7 is enabled by using the correct voltage setting operation. Fixes: 9bcbabafa19b ("regulator: bd718x7: remove voltage change restriction from BD71847 LDOs") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/bd8c00931421fafa57e3fdf46557a83075b7cc17.1622610103.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16regulator: max77620: Use device_set_of_node_from_dev()Dmitry Osipenko
commit 6f55c5dd1118b3076d11d9cb17f5c5f4bc3a1162 upstream. The MAX77620 driver fails to re-probe on deferred probe because driver core tries to claim resources that are already claimed by the PINCTRL device. Use device_set_of_node_from_dev() helper which marks OF node as reused, skipping erroneous execution of pinctrl_bind_pins() for the PMIC device on the re-probe. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210523224243.13219-2-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16regulator: core: resolve supply for boot-on/always-on regulatorsDmitry Baryshkov
commit 98e48cd9283dbac0e1445ee780889f10b3d1db6a upstream. For the boot-on/always-on regulators the set_machine_constrainst() is called before resolving rdev->supply. Thus the code would try to enable rdev before enabling supplying regulator. Enforce resolving supply regulator before enabling rdev. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210519221224.2868496-1-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-14regulator: bd9576: Fix return from bd957x_probe()Dan Carpenter
[ Upstream commit 320fcd6bbd2b500923db518902c2c640242d2b50 ] The probe() function returns an uninitialized variable in the success path. There is no need for the "err" variable at all, just delete it. Fixes: b014e9fae7e7 ("regulator: Support ROHM BD9576MUF and BD9573MUF") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/YEsbfLJfEWtnRpoU@mwanda Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14regulator: bd9571mwv: Fix AVS and DVFS voltage rangeGeert Uytterhoeven
[ Upstream commit 3b6e7088afc919f5b52e4d2de8501ad34d35b09b ] According to Table 30 ("DVFS_MoniVDAC [6:0] Setting Table") in the BD9571MWV-M Datasheet Rev. 002, the valid voltage range is 600..1100 mV (settings 0x3c..0x6e). While the lower limit is taken into account (by setting regulator_desc.linear_min_sel to 0x3c), the upper limit is not. Fix this by reducing regulator_desc.n_voltages from 0x80 to 0x6f. Fixes: e85c5a153fe237f2 ("regulator: Add ROHM BD9571MWV-M PMIC regulator driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210312130242.3390038-2-geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30regulator: qcom-rpmh: Correct the pmic5_hfsmps515 bucksatya priya
[ Upstream commit e610e072c87a30658479a7b4c51e1801cb3f450c ] Correct the REGULATOR_LINEAR_RANGE and n_voltges for pmic5_hfsmps515 buck. Signed-off-by: satya priya <skakit@codeaurora.org> Link: https://lore.kernel.org/r/1614155592-14060-4-git-send-email-skakit@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-25regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage settingFrieder Schrempf
[ Upstream commit 98b94b6e38ca0c4eeb29949c656f6a315000c23e ] The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the voltage for the buck regulators 1, 2 and 3. This has no effect as the PRESET_EN bit is set by default and therefore the preset values are used instead, which are set to 850 mV. To fix this we clear the PRESET_EN bit at time of initialization. Fixes: 0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver") Cc: <stable@vger.kernel.org> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-25regulator: pca9450: Enable system reset on WDOG_B assertionFrieder Schrempf
[ Upstream commit f7684f5a048febd2a7bc98ee81d6dce52f7268b8 ] By default the PCA9450 doesn't handle the assertion of the WDOG_B signal, but this is required to guarantee that things like software resets triggered by the watchdog work reliably. As we don't want to rely on the bootloader to enable this, we tell the PMIC to issue a cold reset in case the WDOG_B signal is asserted (WDOG_B_CFG = 10), just as the NXP U-Boot code does. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20210211105534.38972-3-frieder.schrempf@kontron.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-25regulator: pca9450: Add SD_VSEL GPIO for LDO5Frieder Schrempf
[ Upstream commit 8c67a11bae889f51fe5054364c3c789dfae3ad73 ] LDO5 has two separate control registers. LDO5CTRL_L is used if the input signal SD_VSEL is low and LDO5CTRL_H if it is high. The current driver implementation only uses LDO5CTRL_H. To make this work on boards that have SD_VSEL connected to a GPIO, we add support for specifying an optional GPIO and setting it to high at probe time. In the future we might also want to add support for boards that have SD_VSEL set to a fixed low level. In this case we need to change the driver to be able to use the LDO5CTRL_L register. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20210211105534.38972-1-frieder.schrempf@kontron.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04regulator: bd718x7, bd71828, Fix dvs voltage levelsMatti Vaittinen
[ Upstream commit c294554111a835598b557db789d9ad2379b512a2 ] The ROHM BD718x7 and BD71828 drivers support setting HW state specific voltages from device-tree. This is used also by various in-tree DTS files. These drivers do incorrectly try to compose bit-map using enum values. By a chance this works for first two valid levels having values 1 and 2 - but setting values for the rest of the levels do indicate capability of setting values for first levels as well. Luckily the regulators which support setting values for SUSPEND/LPSR do usually also support setting values for RUN and IDLE too - thus this has not been such a fatal issue. Fix this by defining the old enum values as bits and fixing the parsing code. This allows keeping existing IC specific drivers intact and only slightly changing the rohm-regulator.c Fixes: 21b72156ede8b ("regulator: bd718x7: Split driver to common and bd718x7 specific parts") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210212080023.GA880728@localhost.localdomain Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04regulator: qcom-rpmh: fix pm8009 ldo7Jonathan Marek
[ Upstream commit 20ccc362c3d20da734af896e075b74222589f2c0 ] Use the correct name to avoid ldo7 commands being sent to ldo6's address. Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210211034935.5622-1-jonathan@marek.ca Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04regulator: core: Avoid debugfs: Directory ... already present! errorHans de Goede
[ Upstream commit dbe954d8f1635f949a1d9a5d6e6fb749ae022b47 ] Sometimes regulator_get() gets called twice for the same supply on the same device. This may happen e.g. when a framework / library is used which uses the regulator; and the driver itself also needs to enable the regulator in some cases where the framework will not enable it. Commit ff268b56ce8c ("regulator: core: Don't spew backtraces on duplicate sysfs") already takes care of the backtrace which would trigger when creating a duplicate consumer symlink under /sys/class/regulator/regulator.%d in this scenario. Commit c33d442328f5 ("debugfs: make error message a bit more verbose") causes a new error to get logged in this scenario: [ 26.938425] debugfs: Directory 'wm5102-codec-MICVDD' with parent 'spi-WM510204:00-MICVDD' already present! There is no _nowarn variant of debugfs_create_dir(), but we can detect and avoid this problem by checking the return value of the earlier sysfs_create_link_nowarn() call. Add a check for the earlier sysfs_create_link_nowarn() failing with -EEXIST and skip the debugfs_create_dir() call in that case, avoiding this error getting logged. Fixes: c33d442328f5 ("debugfs: make error message a bit more verbose") Cc: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210122183250.370571-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04regulator: s5m8767: Drop regulators OF node referenceKrzysztof Kozlowski
[ Upstream commit a5872bd3398d0ff2ce4c77794bc7837899c69024 ] The device node reference obtained with of_get_child_by_name() should be dropped on error paths. Fixes: 26aec009f6b6 ("regulator: add device tree support for s5m8767") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210121155914.48034-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04regulator: s5m8767: Fix reference count leakPan Bian
[ Upstream commit dea6dd2ba63f8c8532addb8f32daf7b89a368a42 ] Call of_node_put() to drop references of regulators_np and reg_np before returning error code. Fixes: 9ae5cc75ceaa ("regulator: s5m8767: Pass descriptor instead of GPIO number") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20210121032756.49501-1-bianpan2016@163.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04regulator: axp20x: Fix reference cout leakPan Bian
[ Upstream commit e78bf6be7edaacb39778f3a89416caddfc6c6d70 ] Decrements the reference count of device node and its child node. Fixes: dfe7a1b058bb ("regulator: AXP20x: Add support for regulators subsystem") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120123313.107640-1-bianpan2016@163.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04regulator: qcom-rpmh-regulator: add pm8009-1 chip revisionDmitry Baryshkov
[ Upstream commit 951384cabc5dfb09251d440dbc26058eba86f97e ] PM8009 has special revision (P=1), which is to be used for sm8250 platform. The major difference is the S2 regulator which supplies 0.95 V instead of 2.848V. Declare regulators data to be used for this chip revision. The datasheet calls the chip just pm8009-1, so use the same name. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-4-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13regulator: Fix lockdep warning resolving suppliesMark Brown
[ Upstream commit 14a71d509ac809dcf56d7e3ca376b15d17bd0ddd ] With commit eaa7995c529b54 (regulator: core: avoid regulator_resolve_supply() race condition) we started holding the rdev lock while resolving supplies, an operation that requires holding the regulator_list_mutex. This results in lockdep warnings since in other places we take the list mutex then the mutex on an individual rdev. Since the goal is to make sure that we don't call set_supply() twice rather than a concern about the cost of resolution pull the rdev lock and check for duplicate resolution down to immediately before we do the set_supply() and drop it again once the allocation is done. Fixes: eaa7995c529b54 (regulator: core: avoid regulator_resolve_supply() race condition) Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210122132042.10306-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-13regulator: core: avoid regulator_resolve_supply() race conditionDavid Collins
[ Upstream commit eaa7995c529b54d68d97a30f6344cc6ca2f214a7 ] The final step in regulator_register() is to call regulator_resolve_supply() for each registered regulator (including the one in the process of being registered). The regulator_resolve_supply() function first checks if rdev->supply is NULL, then it performs various steps to try to find the supply. If successful, rdev->supply is set inside of set_supply(). This procedure can encounter a race condition if two concurrent tasks call regulator_register() near to each other on separate CPUs and one of the regulators has rdev->supply_name specified. There is currently nothing guaranteeing atomicity between the rdev->supply check and set steps. Thus, both tasks can observe rdev->supply==NULL in their regulator_resolve_supply() calls. This then results in both creating a struct regulator for the supply. One ends up actually stored in rdev->supply and the other is lost (though still present in the supply's consumer_list). Here is a kernel log snippet showing the issue: [ 12.421768] gpu_cc_gx_gdsc: supplied by pm8350_s5_level [ 12.425854] gpu_cc_gx_gdsc: supplied by pm8350_s5_level [ 12.429064] debugfs: Directory 'regulator.4-SUPPLY' with parent '17a00000.rsc:rpmh-regulator-gfxlvl-pm8350_s5_level' already present! Avoid this race condition by holding the rdev->mutex lock inside of regulator_resolve_supply() while checking and setting rdev->supply. Signed-off-by: David Collins <collinsd@codeaurora.org> Link: https://lore.kernel.org/r/1610068562-4410-1-git-send-email-collinsd@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-19regulator: bd718x7: Add enable timesGuido Günther
[ Upstream commit 3b66e4a8e58a85af3212c7117d7a29c9ef6679a2 ] Use the typical startup times from the data sheet so boards get a reasonable default. Not setting any enable time can lead to board hangs when e.g. clocks are enabled too soon afterwards. This fixes gpu power domain resume on the Librem 5. [Moved #defines into driver, seems to be general agreement and avoids any cross tree issues -- broonie] Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/41fb2ed19f584f138336344e2297ae7301f72b75.1608316658.git.agx@sigxcpu.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-17regulator: qcom-rpmh-regulator: correct hfsmps515 definitionDmitry Baryshkov
commit df6b92fa40050e59ea89784294bf6d04c0c47705 upstream. According to the datasheet pm8009's HFS515 regulators have 16mV resolution rather than declared 1.6 mV. Correct the resolution. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 06369bcc15a1 ("regulator: qcom-rpmh: Add support for SM8150") Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30regulator: axp20x: Fix DLDO2 voltage control register mask for AXP22xDingHua Ma
commit 291de1d102fafef0798cdad9666cd4f8da7da7cc upstream. When I use the axp20x chip to power my SDIO device on the 5.4 kernel, the output voltage of DLDO2 is wrong. After comparing the register manual and source code of the chip, I found that the mask bit of the driver register of the port was wrong. I fixed this error by modifying the mask register of the source code. This error seems to be a copy error of the macro when writing the code. Now the voltage output of the DLDO2 port of axp20x is correct. My development environment is Allwinner A40I of arm architecture, and the kernel version is 5.4. Signed-off-by: DingHua Ma <dinghua.ma.sz@gmail.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Cc: <stable@vger.kernel.org> Fixes: db4a555f7c4c ("regulator: axp20x: use defines for masks") Link: https://lore.kernel.org/r/20201201001000.22302-1-dinghua.ma.sz@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18regulator: ti-abb: Fix array out of bound read access on the first transitionNishanth Menon
At the start of driver initialization, we do not know what bias setting the bootloader has configured the system for and we only know for certain the very first time we do a transition. However, since the initial value of the comparison index is -EINVAL, this negative value results in an array out of bound access on the very first transition. Since we don't know what the setting is, we just set the bias configuration as there is nothing to compare against. This prevents the array out of bound access. NOTE: Even though we could use a more relaxed check of "< 0" the only valid values(ignoring cosmic ray induced bitflips) are -EINVAL, 0+. Fixes: 40b1936efebd ("regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver") Link: https://lore.kernel.org/linux-mm/CA+G9fYuk4imvhyCN7D7T6PMDH6oNp6HDCRiTUKMQ6QXXjBa4ag@mail.gmail.com/ Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20201118145009.10492-1-nm@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-13regulator: workaround self-referent regulatorsMichał Mirosław
Workaround regulators whose supply name happens to be the same as its own name. This fixes boards that used to work before the early supply resolving was removed. The error message is left in place so that offending drivers can be detected. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Cc: stable@vger.kernel.org Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # stpmic1 Link: https://lore.kernel.org/r/d703acde2a93100c3c7a81059d716c50ad1b1f52.1605226675.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-13regulator: avoid resolve_supply() infinite recursionMichał Mirosław
When a regulator's name equals its supply's name the regulator_resolve_supply() recurses indefinitely. Add a check so that debugging the problem is easier. The "fixed" commit just exposed the problem. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Cc: stable@vger.kernel.org Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # stpmic1 Link: https://lore.kernel.org/r/c6171057cfc0896f950c4d8cb82df0f9f1b89ad9.1605226675.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-13regulator: fix memory leak with repeated set_machine_constraints()Michał Mirosław
Fixed commit introduced a possible second call to set_machine_constraints() and that allocates memory for rdev->constraints. Move the allocation to the caller so it's easier to manage and done once. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Cc: stable@vger.kernel.org Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # stpmic1 Link: https://lore.kernel.org/r/78c3d4016cebc08d441aad18cb924b4e4d9cf9df.1605226675.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-11regulator: pfuze100: limit pfuze-support-disable-sw to pfuze{100,200}Sean Nyekjaer
Limit the fsl,pfuze-support-disable-sw to the pfuze100 and pfuze200 variants. When enabling fsl,pfuze-support-disable-sw and using a pfuze3000 or pfuze3001, the driver would choose pfuze100_sw_disable_regulator_ops instead of the newly introduced and correct pfuze3000_sw_regulator_ops. Signed-off-by: Sean Nyekjaer <sean@geanix.com> Fixes: 6f1cf5257acc ("regualtor: pfuze100: correct sw1a/sw2 on pfuze3000") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201110174113.2066534-1-sean@geanix.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-10regulator: core: don't disable regulator if is_enabled return error.Pi-Hsun Shih
In regulator_late_cleanup when is_enabled failed, don't try to disable the regulator since it would likely to fail too and causing confusing error messages. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Link: https://lore.kernel.org/r/20201106064817.3290927-1-pihsun@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-03regulator: defer probe when trying to get voltage from unresolved supplyMichał Mirosław
regulator_get_voltage_rdev() is called in regulator probe() when applying machine constraints. The "fixed" commit exposed the problem that non-bypassed regulators can forward the request to its parent (like bypassed ones) supply. Return -EPROBE_DEFER when the supply is expected but not resolved yet. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Cc: stable@vger.kernel.org Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reported-by: Ondřej Jirman <megous@megous.com> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Ondřej Jirman <megous@megous.com> Link: https://lore.kernel.org/r/a9041d68b4d35e4a2dd71629c8a6422662acb5ee.1604351936.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-05Merge remote-tracking branch 'regulator/for-5.10' into regulator-nextMark Brown
2020-10-05regulator: bd9576: Fix printMatti Vaittinen
The print in probe is done using pr_info. Correct print call would be dev_dbg because: - Severity should really be dbg - The dev pointer is given as first argument Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/c4f55add237455555df0597c72052022f7a669f6.1601885841.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-05regulator: qcom_smd: add pm8953 regulatorsVladimir Lypak
The PM8953 is commonly used on board with MSM8953 SoCs or its variants: APQ8053, SDM(SDA)450 and SDM(SDA)632. It provides 7 SMPS and 23 LDO regulators. Signed-off-by: Vladimir Lypak <junak.pub@gmail.com> Link: https://lore.kernel.org/r/20201004083413.324351-1-junak.pub@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-05regulator: Make constraint debug processing conditional on DEBUGGeert Uytterhoeven
If debugging is disabled, print_constraints() does not print the actual constraints, but still performs some processing and string formatting, only to throw away the result later. Fix this by moving all constraint debug processing to a separate function, and replacing it by a dummy when debugging is disabled. This reduces kernel size by almost 800 bytes (on arm/arm64). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201005131546.22448-1-geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2020-10-01Merge series "Support for PM660/PM660L SPMI and SMD regulators" from ↵Mark Brown
kholk11@gmail.com AngeloGioacchino Del Regno <kholk11@gmail.com>: From: AngeloGioacchino Del Regno <kholk11@gmail.com> This patch series enables support for the regulators as found in the PM660 and PM660L PMICs. While at it, and to make them work, along with other regulators for other qcom PMICs, enlarge the maximum property name length in the regulator core, so that we're able to correctly parse the supply parents, which have got very long names (details in patch 1/5). This patch series has been tested against the following devices: - Sony Xperia XA2 Ultra (SDM630 Nile Discovery) - Sony Xperia 10 (SDM630 Ganges Kirin) - Sony Xperia 10 Plus (SDM636 Ganges Mermaid) AngeloGioacchino Del Regno (7): regulator: core: Enlarge max OF property name length to 64 chars regulator: qcom_spmi: Add support for new regulator types regulator: qcom_spmi: Add PM660/PM660L regulators regulator: dt-bindings: Document the PM660/660L SPMI PMIC entries regulator: qcom_smd: Add PM660/PM660L regulator support mfd: qcom-spmi-pmic: Add support for PM660/PM660L regulator: dt-bindings: Document the PM660/PM660L PMICs entries .../regulator/qcom,smd-rpm-regulator.yaml | 7 ++ .../regulator/qcom,spmi-regulator.txt | 31 +++++ drivers/mfd/qcom-spmi-pmic.c | 4 + drivers/regulator/core.c | 4 +- drivers/regulator/qcom_smd-regulator.c | 113 ++++++++++++++++++ drivers/regulator/qcom_spmi-regulator.c | 107 +++++++++++++++++ include/linux/soc/qcom/smd-rpm.h | 4 + 7 files changed, 268 insertions(+), 2 deletions(-) -- 2.28.0
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-30 10:36:29 +0000