summaryrefslogtreecommitdiff
path: root/drivers/rpmsg
AgeCommit message (Collapse)Author
2020-04-17rpmsg: pull in slab.hMichael S. Tsirkin
In preparation to virtio header changes, include slab.h directly as this module is using it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-20rpmsg: add rpmsg support for mt8183 SCP.Pi-Hsun Shih
Add a simple rpmsg support for mt8183 SCP, that use IPI / IPC directly. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Link: https://lore.kernel.org/r/20191112110330.179649-4-pihsun@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-01Merge tag 'rpmsg-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc Pull rpmsg updates from Bjorn Andersson: "This contains a number of bug fixes to the GLINK transport driver, an off-by-one in the GLINK smem driver and a memory leak fix in the rpmsg char driver" * tag 'rpmsg-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: rpmsg: Fix Kconfig indentation rpmsg: char: Simplify 'rpmsg_eptdev_release()' rpmsg: glink: Free pending deferred work on remove rpmsg: glink: Don't send pending rx_done during remove rpmsg: glink: Fix rpmsg_register_device err handling rpmsg: glink: Put an extra reference during cleanup rpmsg: glink: Fix use after free in open_ack TIMEOUT case rpmsg: glink: Fix reuse intents memory leak issue rpmsg: glink: Set tail pointer to 0 at end of FIFO rpmsg: char: release allocated memory
2019-11-21rpmsg: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20191120133945.13938-1-krzk@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-11-08rpmsg: char: Simplify 'rpmsg_eptdev_release()'Christophe JAILLET
Use 'skb_queue_purge()' instead of re-implementing it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-23compat_ioctl: move more drivers to compat_ptr_ioctlArnd Bergmann
The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-17rpmsg: glink: Free pending deferred work on removeBjorn Andersson
By just cancelling the deferred rx worker during GLINK instance teardown any pending deferred commands are leaked, so free them. Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Acked-by: Chris Lew <clew@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-17rpmsg: glink: Don't send pending rx_done during removeBjorn Andersson
Attempting to transmit rx_done messages after the GLINK instance is being torn down will cause use after free and memory leaks. So cancel the intent_work and free up the pending intents. With this there are no concurrent accessors of the channel left during qcom_glink_native_remove() and there is therefor no need to hold the spinlock during this operation - which would prohibit the use of cancel_work_sync() in the release function. So remove this. Fixes: 1d2ea36eead9 ("rpmsg: glink: Add rx done command") Cc: stable@vger.kernel.org Acked-by: Chris Lew <clew@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-16rpmsg: glink: Fix rpmsg_register_device err handlingChris Lew
The device release function is set before registering with rpmsg. If rpmsg registration fails, the framework will call device_put(), which invokes the release function. The channel create logic does not need to free rpdev if rpmsg_register_device() fails and release is called. Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-16rpmsg: glink: Put an extra reference during cleanupChris Lew
In a remote processor crash scenario, there is no guarantee the remote processor sent close requests before it went into a bad state. Remove the reference that is normally handled by the close command in the so channel resources can be released. Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Chris Lew <clew@codeaurora.org> Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-16rpmsg: glink: Fix use after free in open_ack TIMEOUT caseArun Kumar Neelakantam
Extra channel reference put when remote sending OPEN_ACK after timeout causes use-after-free while handling next remote CLOSE command. Remove extra reference put in timeout case to avoid use-after-free. Fixes: b4f8e52b89f6 ("rpmsg: Introduce Qualcomm RPM glink driver") Cc: stable@vger.kernel.org Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-16rpmsg: glink: Fix reuse intents memory leak issueArun Kumar Neelakantam
Memory allocated for re-usable intents are not freed during channel cleanup which causes memory leak in system. Check and free all re-usable memory to avoid memory leak. Fixes: 933b45da5d1d ("rpmsg: glink: Add support for TX intents") Cc: stable@vger.kernel.org Acked-By: Chris Lew <clew@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-11rpmsg: glink: Set tail pointer to 0 at end of FIFOChris Lew
When wrapping around the FIFO, the remote expects the tail pointer to be reset to 0 on the edge case where the tail equals the FIFO length. Fixes: caf989c350e8 ("rpmsg: glink: Introduce glink smem based transport") Cc: stable@vger.kernel.org Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-10-04rpmsg: char: release allocated memoryNavid Emamdoost
In rpmsg_eptdev_write_iter, if copy_from_iter_full fails the allocated buffer needs to be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-09-17rpmsg: glink-smem: Name the edge based on parent remoteprocBjorn Andersson
Naming the glink edge device on the parent of_node short name causes collisions when multiple remoteproc instances with only different unit address are described on the platform_bus in DeviceTree. Base the edge's name on the parent remoteproc's name instead, to ensure that it's unique. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-29rpmsg: glink: Use struct_size() helperGustavo A. R. Silva
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct { ... struct intent_pair intents[]; } __packed * msg; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(*msg) + sizeof(struct intent_pair) * count with: struct_size(msg, intents, count) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-27rpmsg: virtio_rpmsg_bus: replace "%p" with "%pK"Suman Anna
The virtio_rpmsg_bus driver uses the "%p" format-specifier for printing the vring buffer address. This prints only a hashed pointer even for previliged users. Use "%pK" instead so that the address can be printed during debug using kptr_restrict sysctl. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-26rpmsg: core: fix commentsPierre-Louis Bossart
Minor typos, grammar and copy/paste issues. Fix for consistency. No functional or semantic change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-05-21rpmsg: core: Make remove handler for rpmsg driver optional.Pi-Hsun Shih
Most other bus (for example, SPI, i2c) have the remove handler for driver optional. Make remove handler for rpmsg driver optional too. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20rpmsg: virtio: change header file sort styleLoic Pallardy
Make header files alphabetical order. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-02-20rpmsg: virtio: allocate buffer from parentLoic Pallardy
Remoteproc is now capable to create one specific sub-device per virtio link to associate a dedicated memory pool. This implies to change device used by virtio_rpmsg for buffer allocation from grand-parent to parent. Signed-off-by: Loic Pallardy <loic.pallardy@st.com> Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Anup Patel <anup@brainfault.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-10-03rpmsg: glink: smem: Support rx peak for size less than 4 bytesArun Kumar Neelakantam
The current rx peak function fails to read the data if size is less than 4bytes. Use memcpy_fromio to support data reads of size less than 4 bytes. Cc: stable@vger.kernel.org Fixes: f0beb4ba9b18 ("rpmsg: glink: Remove chunk size word align warning") Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-27rpmsg: smd: fix memory leak on channel createColin Ian King
Currently a failed allocation of channel->name leads to an immediate return without freeing channel. Fix this by setting ret to -ENOMEM and jumping to an exit path that kfree's channel. Detected by CoverityScan, CID#1473692 ("Resource Leak") Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Cc: stable@vger.kernel.org Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-09-01rpmsg: glink: Remove chunk size word align warningChris Lew
It is possible for the chunk sizes coming from the non RPM remote procs to not be word aligned. Remove the alignment warning and continue to read from the FIFO so execution is not stalled. Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-08-27rpmsg: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-remoteproc@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-08-27rpmsg: char: Migrate to iter versions of read and writeBjorn Andersson
In order to be able to use the aio interface for writing to a rpmsg_char the write_iter function must be implemented, so migrate to iter version for read and write functions. Regular read and write uses the iter methods if present and is as such unaffected. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: Add compat ioctl for rpmsg char driverArun Kumar Neelakantam
Add compat ioctl callback to support 32bit user space applications. Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: glink: Store edge name for glink deviceChris Lew
Channels may need to identify the edge their channel was probed for. Store the edge name by reading the label property from device tree or default to the node name. Signed-off-by: Chris Lew <clew@codeaurora.org> Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: core: add support to power domains for devicesSrinivas Kandagatla
Some of the rpmsg devices need to switch on power domains to communicate with remote processor. For example on Qualcomm DB820c platform LPASS power domain needs to switched on for any kind of audio services. This patch adds the missing power domain support in rpmsg core. Without this patch attempting to play audio via QDSP on DB820c would reboot the system. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: smd: fix kerneldoc warningsSrinivas Kandagatla
This patch fixes below kerneldoc warnings qcom_smd.c:141: warning: Function parameter or member 'dev' not described in 'qcom_smd_edge' qcom_smd.c:141: warning: Function parameter or member 'name' not described in 'qcom_smd_edge' qcom_smd.c:141: warning: Function parameter or member 'new_channel_event' not described in 'qcom_smd_edge' qcom_smd.c:222: warning: Function parameter or member 'qsept' not described in 'qcom_smd_channel' qcom_smd.c:222: warning: Function parameter or member 'registered' not described in 'qcom_smd_channel' qcom_smd.c:222: warning: Function parameter or member 'state_change_event' not described in 'qcom_smd_channel' qcom_smd.c:222: warning: Function parameter or member 'drvdata' not described in 'qcom_smd_channel' qcom_smd.c:737: warning: Function parameter or member 'wait' not described in '__qcom_smd_send' Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: glink: Fix various kerneldoc warnings.Srinivas Kandagatla
Fix below kerneldoc warnings while building with W=1 qcom_glink_native.c:53: warning: Function parameter or member 'data' not described in 'glink_defer_cmd' qcom_glink_native.c:75: warning: Function parameter or member 'data' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'id' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'size' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'reuse' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'in_use' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'offset' not described in 'glink_core_rx_intent' qcom_glink_native.c:75: warning: Function parameter or member 'node' not described in 'glink_core_rx_intent' qcom_glink_native.c:116: warning: Function parameter or member 'features' not described in 'qcom_glink' qcom_glink_native.c:116: warning: Function parameter or member 'intentless' not described in 'qcom_glink' qcom_glink_native.c:524: warning: Function parameter or member 'version' not described in 'qcom_glink_receive_version' qcom_glink_native.c:524: warning: Function parameter or member 'features' not described in 'qcom_glink_receive_version' qcom_glink_native.c:524: warning: Excess function parameter 'r_version' description in 'qcom_glink_receive_version' qcom_glink_native.c:524: warning: Excess function parameter 'r_features' description in 'qcom_glink_receive_version' qcom_glink_native.c:551: warning: Function parameter or member 'version' not described in 'qcom_glink_receive_version_ack' qcom_glink_native.c:551: warning: Function parameter or member 'features' not described in 'qcom_glink_receive_version_ack' qcom_glink_native.c:551: warning: Excess function parameter 'r_version' description in 'qcom_glink_receive_version_ack' qcom_glink_native.c:551: warning: Excess function parameter 'r_features' description in 'qcom_glink_receive_version_ack' qcom_glink_native.c:570: warning: bad line: wire format and transmit qcom_glink_native.c:604: warning: Function parameter or member 'intent' not described in 'qcom_glink_advertise_intent' qcom_glink_native.c:604: warning: Excess function parameter 'size' description in 'qcom_glink_advertise_intent' qcom_glink_native.c:710: warning: Function parameter or member 'glink' not described in 'qcom_glink_handle_intent_req' qcom_glink_native.c:710: warning: Function parameter or member 'cid' not described in 'qcom_glink_handle_intent_req' qcom_glink_native.c:710: warning: Function parameter or member 'size' not described in 'qcom_glink_handle_intent_req' Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-30rpmsg: glink: correctly annotate intent membersSrinivas Kandagatla
As intent structure members are not correctly annotated, leading to below warnings qcom_glink_native.c:614:16: warning: incorrect type in assignment (different base types) qcom_glink_native.c:614:16: expected unsigned short [unsigned] [usertype] id qcom_glink_native.c:614:16: got restricted __le16 [usertype] <noident> qcom_glink_native.c:615:18: warning: incorrect type in assignment (different base types) qcom_glink_native.c:615:18: expected unsigned short [unsigned] [usertype] lcid qcom_glink_native.c:615:18: got restricted __le16 [usertype] <noident> qcom_glink_native.c:616:19: warning: incorrect type in assignment (different base types) qcom_glink_native.c:616:19: expected unsigned int [unsigned] [usertype] count qcom_glink_native.c:616:19: got restricted __le32 [usertype] <noident> qcom_glink_native.c:617:18: warning: incorrect type in assignment (different base types) qcom_glink_native.c:617:18: expected unsigned int [unsigned] [usertype] size qcom_glink_native.c:617:18: got restricted __le32 [usertype] <noident> qcom_glink_native.c:618:18: warning: incorrect type in assignment (different base types) qcom_glink_native.c:618:18: expected unsigned int [unsigned] [usertype] liid qcom_glink_native.c:618:18: got restricted __le32 [usertype] <noident> Fix this by correctly annotating them. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-07-01rpmsg: smd: Add missing include of sizes.hNiklas Cassel
Add missing include of sizes.h. drivers/rpmsg/qcom_smd.c: In function ‘qcom_smd_channel_open’: drivers/rpmsg/qcom_smd.c:809:36: error: ‘SZ_4K’ undeclared (first use in this function) bb_size = min(channel->fifo_size, SZ_4K); ^~~~~ Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-04rpmsg: smd: do not use mananged resources for endpoints and channelsSrinivas Kandagatla
All the managed resources would be freed by the time release function is invoked. Handling such memory in qcom_smd_edge_release() would do bad things. Found this issue while testing Audio usecase where the dsp is started up and shutdown in a loop. This patch fixes this issue by using simple kzalloc for allocating channel->name and channel which is then freed in qcom_smd_edge_release(). Without this patch restarting a remoteproc would crash the system. Fixes: 53e2822e56c7 ("rpmsg: Introduce Qualcomm SMD backend") Cc: <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: char: Switch to SPDX license identifierSuman Anna
Use the appropriate SPDX license identifier in the rpmsg char driver source file and drop the previous boilerplate license text. The uapi header file already had the SPDX license identifier added as part of a mass update but the license text removal was deferred for later, and this patch drops the same. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: glink: Switch to SPDX license identifierSuman Anna
Use the appropriate SPDX license identifier in various rpmsg glink driver source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: smd: Switch to SPDX license identifierSuman Anna
Use the appropriate SPDX license identifier in the rpmsg SMD backend driver source file and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: virtio_rpmsg_bus: Switch to SPDX license identifierSuman Anna
Use the appropriate SPDX license identifier in the virtio rpmsg bus driver source file and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-03rpmsg: Switch to SPDX license identifierSuman Anna
Use the appropriate SPDX license identifier in the rpmsg core source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-05-09Merge tag 'v4.17-rc4' into rpmsg-nextBjorn Andersson
Pick up fixes from rproc-v4.17-1 Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25rpmsg: qcom_smd: Access APCS through mailbox frameworkBjorn Andersson
Attempt to acquire the APCS IPC through the mailbox framework and fall back to the old syscon based approach, to allow us to move away from using the syscon. Reviewed-by: Arun Kumar Neelakantam <aneela@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25rpmsg: Add driver_override device attribute for rpmsg_deviceAnup Patel
This patch adds "driver_override" device attribute for rpmsg_device which will allow users to explicitly specify the rpmsg_driver to be used via sysfs entry. The "driver_override" device attribute implemented here is very similar to "driver_override" implemented for platform, pci, and amba bus types. One important use-case of "driver_override" device attribute is to force use of rpmsg_chrdev driver for certain rpmsg_device instances. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-04-25rpmsg: added MODULE_ALIAS for rpmsg_charRamon Fried
Added "rpmsg:rpmsg_chrdev" MODULE_ALIAS to autoload rpmg_chrdev module automatically. Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27rpmsg: smd: Use announce_create to process any receive workBjorn Andersson
It is possible that incoming data arrives before the client driver has reached a point in the probe method where adequate context for handling the incoming message has been established. In the event that the client's callback function returns an error the message will be left on the FIFO and by invoking the receive handler after the device has been probed the message will be picked off the FIFO and the callback invoked again. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27rpmsg: Only invoke announce_create for rpdev with endpointsBjorn Andersson
For special rpmsg devices without a primary endpoint there is nothing to announce so don't call the backend announce create function if we didn't create an endpoint. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27rpmsg: smd: Fix container_of macrosBjorn Andersson
The container_of macros should not use the same name for the parameter as the member to use for lookup, as this will result in a compilation error unless the passed parameter has the same name as the member. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-27Revert "rpmsg: smd: Create device for all channels"Bjorn Andersson
In an effort to pick up channels that are in a funky state we optimistically tried to open all channels that we found, with the addition that we failed if the other side did not handshake the opening. But as we're starting the modem a second time all channels are found - in a "funky" state - and we try to open them. But the modem firmware requires the IPCRTR to be up in order to initialize. So any channels we try to open before that will fail and will not be opened again. This takes care of the regression, at the cost of reintroducing the previous behavior of handling of channels with "funky" states. Reverts commit c12fc4519f60 ("rpmsg: smd: Create device for all channels") Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-20rpmsg: glink: Use spinlock in tx pathBjorn Andersson
Switch the tx_lock to a spinlock we allow clients to use rpmsg_trysend() from atomic context. In order to allow clients to sleep while waiting for space in the FIFO we release the lock temporarily around the delay; which should be replaced by sending a READ_NOTIF and waiting for the remote to signal us that space has been made available. Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-20rpmsg: smd: Use spinlock in tx pathBjorn Andersson
By switching the tx_lock to a spinlock we allow clients to use rpmsg_trysend() from atomic context. The mutex was interruptable as it was previously held for the duration of some client waiting for available space in the FIFO, but this was recently changed to only be held temporarily - allowing us to replace it with a spinlock. Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-03-17rpmsg: smd: use put_device() if device_register failArvind Yadav
if device_register() returned an error! Always use put_device() to give up the reference initialized. unregister device for other return error. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>