summaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2021-04-03Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix to iscsi for a rare race condition which can cause a kernel panic" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: Fix race condition between login and sync thread
2021-03-29scsi: iscsi: Fix race condition between login and sync threadGulam Mohamed
A kernel panic was observed due to a timing issue between the sync thread and the initiator processing a login response from the target. The session reopen can be invoked both from the session sync thread when iscsid restarts and from iscsid through the error handler. Before the initiator receives the response to a login, another reopen request can be sent from the error handler/sync session. When the initial login response is subsequently processed, the connection has been closed and the socket has been released. To fix this a new connection state, ISCSI_CONN_BOUND, is added: - Set the connection state value to ISCSI_CONN_DOWN upon iscsi_if_ep_disconnect() and iscsi_if_stop_conn() - Set the connection state to the newly created value ISCSI_CONN_BOUND after bind connection (transport->bind_conn()) - In iscsi_set_param(), return -ENOTCONN if the connection state is not either ISCSI_CONN_BOUND or ISCSI_CONN_UP Link: https://lore.kernel.org/r/20210325093248.284678-1-gulam.mohamed@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Gulam Mohamed <gulam.mohamed@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> index 91074fd97f64..f4bf62b007a0 100644
2021-03-28Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Seven fixes, all in drivers (qla2xxx, mkt3sas, qedi, target, ibmvscsi). The most serious are the target pscsi oom and the qla2xxx revert which can otherwise cause a use after free" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: pscsi: Clean up after failure in pscsi_map_sg() scsi: target: pscsi: Avoid OOM in pscsi_map_sg() scsi: mpt3sas: Fix error return code of mpt3sas_base_attach() scsi: qedi: Fix error return code of qedi_alloc_global_queues() scsi: Revert "qla2xxx: Make sure that aborted commands are freed" scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops()
2021-03-24scsi: mpt3sas: Fix error return code of mpt3sas_base_attach()Jia-Ju Bai
When kzalloc() returns NULL, no error return code of mpt3sas_base_attach() is assigned. To fix this bug, r is assigned with -ENOMEM in this case. Link: https://lore.kernel.org/r/20210308035241.3288-1-baijiaju1990@gmail.com Fixes: c696f7b83ede ("scsi: mpt3sas: Implement device_remove_in_progress check in IOCTL path") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-24scsi: qedi: Fix error return code of qedi_alloc_global_queues()Jia-Ju Bai
When kzalloc() returns NULL to qedi->global_queues[i], no error return code of qedi_alloc_global_queues() is assigned. To fix this bug, status is assigned with -ENOMEM in this case. Link: https://lore.kernel.org/r/20210308033024.27147-1-baijiaju1990@gmail.com Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-24scsi: Revert "qla2xxx: Make sure that aborted commands are freed"Bart Van Assche
Calling vha->hw->tgt.tgt_ops->free_cmd() from qlt_xmit_response() is wrong since the command for which a response is sent must remain valid until the SCSI target core calls .release_cmd(). It has been observed that the following scenario triggers a kernel crash: - qlt_xmit_response() calls qlt_check_reserve_free_req() - qlt_check_reserve_free_req() returns -EAGAIN - qlt_xmit_response() calls vha->hw->tgt.tgt_ops->free_cmd(cmd) - transport_handle_queue_full() tries to retransmit the response Fix this crash by reverting the patch that introduced it. Link: https://lore.kernel.org/r/20210320232359.941-2-bvanassche@acm.org Fixes: 0dcec41acb85 ("scsi: qla2xxx: Make sure that aborted commands are freed") Cc: Quinn Tran <qutran@marvell.com> Cc: Mike Christie <michael.christie@oracle.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-24scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ awareTyrel Datwyler
During MQ enablement of the ibmvfc driver ibmvfc_wait_for_ops() was missed. This function is responsible for waiting on commands to complete that match a certain criteria such as LUN or cancel key. The implementation as is only scans the CRQ for events ignoring any sub-queues and as a result will exit successfully without doing anything when operating in MQ channelized mode. Check the MQ and channel use flags to determine which queues are applicable, and scan each queue accordingly. Note in MQ mode SCSI commands are only issued down sub-queues and the CRQ is only used for driver specific management commands. As such the CRQ events are ignored when operating in MQ mode with channels. Link: https://lore.kernel.org/r/20210319205029.312969-3-tyreld@linux.ibm.com Fixes: 9000cb998bcf ("scsi: ibmvfc: Enable MQ and set reasonable defaults") Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-24scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops()Tyrel Datwyler
For various EH activities the ibmvfc driver uses ibmvfc_wait_for_ops() to wait for the completion of commands that match a given criteria be it cancel key, or specific LUN. With recent changes commands are completed outside the lock in bulk by removing them from the sent list and adding them to a private completion list. This introduces a potential race in ibmvfc_wait_for_ops() since the criteria for a command to be outstanding is no longer simply being on the sent list, but instead not being on the free list. Avoid this race by scanning the entire command event pool and checking that any matching command that ibmvfc needs to wait on is not already on the free list. Link: https://lore.kernel.org/r/20210319205029.312969-2-tyreld@linux.ibm.com Fixes: 1f4a4a19508d ("scsi: ibmvfc: Complete commands outside the host/queue lock") Reviewed-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eight fixes, all in drivers, all fairly minor either being fixes in error legs, memory leaks on teardown, context errors or semantic problems" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: Do not use GFP_KERNEL in atomic context scsi: ufs: ufs-mediatek: Correct operator & -> && scsi: sd_zbc: Update write pointer offset cache scsi: lpfc: Fix some error codes in debugfs scsi: qla2xxx: Fix broken #endif placement scsi: st: Fix a use after free in st_open() scsi: myrs: Fix a double free in myrs_cleanup() scsi: ibmvfc: Free channel_setup_buf during device tear down
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-03-16scsi: mpt3sas: Do not use GFP_KERNEL in atomic contextChristophe JAILLET
mpt3sas_get_port_by_id() can be called when a spinlock is held. Use GFP_ATOMIC instead of GFP_KERNEL when allocating memory. Issue spotted by call_kern.cocci: ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7125 inside lock on line 7123 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6842 inside lock on line 6839 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6854 inside lock on line 6851 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7706 inside lock on line 7702 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 10260 inside lock on line 10256 but uses GFP_KERNEL Link: https://lore.kernel.org/r/20210220093951.905362-1-christophe.jaillet@wanadoo.fr Fixes: 324c122fc0a4 ("scsi: mpt3sas: Add module parameter multipath_on_hba") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-16scsi: ufs: ufs-mediatek: Correct operator & -> &&dongjian
The "lpm" and "->enabled" are all boolean. We should be using && rather than the bit operator. Link: https://lore.kernel.org/r/1615896915-148864-1-git-send-email-dj0227@163.com Fixes: 488edafb1120 ("scsi: ufs-mediatek: Introduce low-power mode for device power supply") Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: dongjian <dongjian@yulong.com> Signed-off-by: Yue Hu <huyue2@yulong.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-16scsi: sd_zbc: Update write pointer offset cacheJohannes Thumshirn
Recent changes changed the completion of SCSI commands from Soft-IRQ context to IRQ context. This triggers the following warning, when we're completing writes to zoned block devices that go through the zone append emulation: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc2+ #2 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015 RIP: 0010:__local_bh_disable_ip+0x3f/0x50 RSP: 0018:ffff8883e1409ba8 EFLAGS: 00010006 RAX: 0000000080010001 RBX: 0000000000000001 RCX: 0000000000000013 RDX: ffff888129e4d200 RSI: 0000000000000201 RDI: ffffffff915b9dbd RBP: ffff888113e9a540 R08: ffff888113e9a540 R09: 00000000000077f0 R10: 0000000000080000 R11: 0000000000000001 R12: ffff888129e4d200 R13: 0000000000001000 R14: 00000000000077f0 R15: ffff888129e4d218 FS: 0000000000000000(0000) GS:ffff8883e1400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f8418ebc0 CR3: 000000021202a006 CR4: 00000000001706f0 Call Trace: <IRQ> _raw_spin_lock_bh+0x18/0x40 sd_zbc_complete+0x43d/0x1150 sd_done+0x631/0x1040 ? mark_lock+0xe4/0x2fd0 ? provisioning_mode_store+0x3f0/0x3f0 scsi_finish_command+0x31b/0x5c0 _scsih_io_done+0x960/0x29e0 [mpt3sas] ? mpt3sas_scsih_scsi_lookup_get+0x1c7/0x340 [mpt3sas] ? __lock_acquire+0x166b/0x58b0 ? _get_st_from_smid+0x4a/0x80 [mpt3sas] _base_process_reply_queue+0x23f/0x26e0 [mpt3sas] ? lock_is_held_type+0x98/0x110 ? find_held_lock+0x2c/0x110 ? mpt3sas_base_sync_reply_irqs+0x360/0x360 [mpt3sas] _base_interrupt+0x8d/0xd0 [mpt3sas] ? rcu_read_lock_sched_held+0x3f/0x70 __handle_irq_event_percpu+0x24d/0x600 handle_irq_event+0xef/0x240 ? handle_irq_event_percpu+0x110/0x110 handle_edge_irq+0x1f6/0xb60 __common_interrupt+0x75/0x160 common_interrupt+0x7b/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 Don't use spin_lock_bh() to protect the update of the write pointer offset cache, but use spin_lock_irqsave() for it. Link: https://lore.kernel.org/r/3cfebe48d09db73041b7849be71ffbcec7ee40b3.1615369586.git.johannes.thumshirn@wdc.com Fixes: 664f0dce2058 ("scsi: mpt3sas: Add support for shared host tagset for CPU hotplug") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: lpfc: Fix some error codes in debugfsDan Carpenter
If copy_from_user() or kstrtoull() fail then the correct behavior is to return a negative error code. Link: https://lore.kernel.org/r/YEsbU/UxYypVrC7/@mwanda Fixes: f9bb2da11db8 ("[SCSI] lpfc 8.3.27: T10 additions for SLI4") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: qla2xxx: Fix broken #endif placementAlexey Dobriyan
Only half of the file is under include guard because terminating #endif is placed too early. Link: https://lore.kernel.org/r/YE4snvoW1SuwcXAn@localhost.localdomain Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: st: Fix a use after free in st_open()Lv Yunlong
In st_open(), if STp->in_use is true, STp will be freed by scsi_tape_put(). However, STp is still used by DEBC_printk() after. It is better to DEBC_printk() before scsi_tape_put(). Link: https://lore.kernel.org/r/20210311064636.10522-1-lyl2019@mail.ustc.edu.cn Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: myrs: Fix a double free in myrs_cleanup()Lv Yunlong
In myrs_cleanup(), cs->mmio_base will be freed twice by iounmap(). Link: https://lore.kernel.org/r/20210311063005.9963-1-lyl2019@mail.ustc.edu.cn Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)") Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-15scsi: ibmvfc: Free channel_setup_buf during device tear downTyrel Datwyler
The buffer for negotiating channel setup is DMA allocated at device probe time. However, the remove path fails to free this allocation which will prevent the hypervisor from releasing the virtual device in the case of a hotplug remove. Fix this issue by freeing the buffer allocation in ibmvfc_free_mem(). Link: https://lore.kernel.org/r/20210311012212.428068-1-tyreld@linux.ibm.com Fixes: e95eef3fc0bc ("scsi: ibmvfc: Implement channel enquiry and setup commands") Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-12Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Ten updates: one non code maintainer update for vmw_pvscsi, five code updates for ibmvfc and four for UFS. All are either trivial patches or bug fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: vmw_pvscsi: MAINTAINERS: Update maintainer scsi: ufs: Convert sysfs sprintf/snprintf family to sysfs_emit scsi: ufs: Remove redundant checks of !hba in suspend/resume callbacks scsi: ufs: ufs-qcom: Disable interrupt in reset path scsi: ufs: Minor adjustments to error handling scsi: ibmvfc: Reinitialize sub-CRQs and perform channel enquiry after LPM scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ during cleanup scsi: ibmvfc: Treat H_CLOSED as success during sub-CRQ registration scsi: ibmvfc: Fix invalid sub-CRQ handles after hard reset scsi: ibmvfc: Simplify handling of sub-CRQ initialization
2021-03-07Merge tag 'powerpc-5.12-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One non-fix, the conversion of vio_driver->remove() to return void, which touches various powerpc specific drivers. Fix the privilege checks we do in our perf handling, which could cause soft/hard lockups in some configurations. Fix a bug with IRQ affinity seen on kdump kernels when CPU 0 is offline in the second kernel. Fix missed page faults after mprotect(..., PROT_NONE) on 603 (32-bit). Fix a bug in our VSX (vector) instruction emulation, which should only be seen when doing VSX ops to cache inhibited mappings. Three commits fixing various build issues with obscure configurations. Thanks to Athira Rajeev, Cédric Le Goater, Christophe Leroy, Christoph Plattner, Greg Kurz, Jordan Niethe, Laurent Vivier, Ravi Bangoria, Tyrel Datwyler, and Uwe Kleine-König" * tag 'powerpc-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/sstep: Fix VSX instruction emulation powerpc/perf: Fix handling of privilege level checks in perf interrupt context powerpc: Force inlining of mmu_has_feature to fix build failure vio: make remove callback return void powerpc/syscall: Force inlining of __prep_irq_for_enabled_exit() powerpc/603: Fix protection of user pages mapped with PROT_NONE powerpc/pseries: Don't enforce MSI affinity with kdump powerpc/4xx: Fix build errors from mfdcr()
2021-03-04scsi: iscsi: Verify lengths on passthrough PDUsChris Leech
Open-iSCSI sends passthrough PDUs over netlink, but the kernel should be verifying that the provided PDU header and data lengths fall within the netlink message to prevent accessing beyond that in memory. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: iscsi: Ensure sysfs attributes are limited to PAGE_SIZEChris Leech
As the iSCSI parameters are exported back through sysfs, it should be enforcing that they never are more than PAGE_SIZE (which should be more than enough) before accepting updates through netlink. Change all iSCSI sysfs attributes to use sysfs_emit(). Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: iscsi: Restrict sessions and handles to admin capabilitiesLee Duncan
Protect the iSCSI transport handle, available in sysfs, by requiring CAP_SYS_ADMIN to read it. Also protect the netlink socket by restricting reception of messages to ones sent with CAP_SYS_ADMIN. This disables normal users from being able to end arbitrary iSCSI sessions. Cc: stable@vger.kernel.org Reported-by: Adam Nichols <adam@grimm-co.com> Reviewed-by: Chris Leech <cleech@redhat.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: vmw_pvscsi: MAINTAINERS: Update maintainerVishal Bhakta
The entries in the source files are removed as well. Link: https://lore.kernel.org/r/20210226234347.21535-1-vbhakta@vmware.com Signed-off-by: Vishal Bhakta <vbhakta@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: ufs: Convert sysfs sprintf/snprintf family to sysfs_emitJiapeng Chong
Fix the following coccicheck warning: ./drivers/scsi/ufs/ufshcd.c:1538:8-16: WARNING: use scnprintf or sprintf. Link: https://lore.kernel.org/r/1614665298-115183-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: ufs: Remove redundant checks of !hba in suspend/resume callbacksCan Guo
Runtime and system suspend/resume can only come after hba probe invokes platform_set_drvdata(pdev, hba), meaning hba cannot be NULL in these PM callbacks, so remove the checks of !hba. Link: https://lore.kernel.org/r/1614145010-36079-4-git-send-email-cang@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: ufs: ufs-qcom: Disable interrupt in reset pathNitin Rawat
Disable interrupt in reset path to flush pending IRQ handler in order to avoid possible NoC issues. Link: https://lore.kernel.org/r/1614145010-36079-3-git-send-email-cang@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: ufs: Minor adjustments to error handlingCan Guo
In error handling prepare stage, after SCSI requests are blocked, do a down/up_write(clk_scaling_lock) to clean up the queuecommand() path. Meanwhile, stop eeh_work in case it disturbs error recovery. Moreover, reset ufshcd_state at the entrance of ufshcd_probe_hba(), since it may be called multiple times during error recovery. Link: https://lore.kernel.org/r/1614145010-36079-2-git-send-email-cang@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: ibmvfc: Reinitialize sub-CRQs and perform channel enquiry after LPMTyrel Datwyler
A live partition migration (LPM) results in a CRQ disconnect similar to a hard reset. In this LPM case the hypervisor mostly preserves the CRQ transport such that it simply needs to be reenabled. However, the capabilities may have changed such as fewer channels, or no channels at all. Further, its possible that there may be sub-CRQ support, but no channel support. The CRQ reenable path currently doesn't take any of this into consideration. For simplicity release and reinitialize sub-CRQs during reenable, and set do_enquiry and using_channels with the appropriate values to trigger channel renegotiation. Link: https://lore.kernel.org/r/20210302230543.9905-6-tyreld@linux.ibm.com Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels") Reviewed-by: Brian King <brking@linux.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: ibmvfc: Store return code of H_FREE_SUB_CRQ during cleanupTyrel Datwyler
The H_FREE_SUB_CRQ hypercall can return a retry delay return code that indicates the call needs to be retried after a specific amount of time delay. The error path to free a sub-CRQ in case of a failure during channel registration fails to capture the return code of H_FREE_SUB_CRQ which will result in the delay loop being skipped in the case of a retry delay return code. Store the return code result of the H_FREE_SUB_CRQ call such that the return code check in the delay loop evaluates a meaningful value. Also, use the rtas_busy_delay() to check the rc value and delay for the appropriate amount of time. Link: https://lore.kernel.org/r/20210302230543.9905-5-tyreld@linux.ibm.com Fixes: 39e461fddff0 ("scsi: ibmvfc: Map/request irq and register Sub-CRQ interrupt handler") Reviewed-by: Brian King <brking@linux.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: ibmvfc: Treat H_CLOSED as success during sub-CRQ registrationTyrel Datwyler
A non-zero return code for H_REG_SUB_CRQ is currently treated as a failure resulting in failing sub-CRQ setup. The case of H_CLOSED should not be treated as a failure. This return code translates to a successful sub-CRQ registration by the hypervisor, and is meant to communicate back that there is currently no partner VIOS CRQ connection established as of yet. This is a common occurrence during a disconnect where the client adapter can possibly come back up prior to the partner adapter. For non-zero return code from H_REG_SUB_CRQ treat a H_CLOSED as success so that sub-CRQs are successfully setup. Link: https://lore.kernel.org/r/20210302230543.9905-4-tyreld@linux.ibm.com Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels") Reviewed-by: Brian King <brking@linux.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: ibmvfc: Fix invalid sub-CRQ handles after hard resetTyrel Datwyler
A hard reset results in a complete transport disconnect such that the CRQ connection with the partner VIOS is broken. This has the side effect of also invalidating the associated sub-CRQs. The current code assumes that the sub-CRQs are perserved resulting in a protocol violation after trying to reconnect them with the VIOS. This introduces an infinite loop such that the VIOS forces a disconnect after each subsequent attempt to re-register with invalid handles. Avoid the aforementioned issue by releasing the sub-CRQs prior to CRQ disconnect, and driving a reinitialization of the sub-CRQs once a new CRQ is registered with the hypervisor. Link: https://lore.kernel.org/r/20210302230543.9905-3-tyreld@linux.ibm.com Fixes: 3034ebe26389 ("scsi: ibmvfc: Add alloc/dealloc routines for SCSI Sub-CRQ Channels") Reviewed-by: Brian King <brking@linux.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04scsi: ibmvfc: Simplify handling of sub-CRQ initializationTyrel Datwyler
If ibmvfc_init_sub_crqs() fails ibmvfc_probe() simply parrots registration failure reported elsewhere, and futher vhost->scsi_scrq.scrq == NULL is indication enough to the driver that it has no sub-CRQs available. The mq_enabled check can also be moved into ibmvfc_init_sub_crqs() such that each caller doesn't have to gate the call with a mq_enabled check. Finally, in the case of sub-CRQ setup failure setting do_enquiry can be turned off to putting the driver into single queue fallback mode. The aforementioned changes also simplify the next patch in the series that fixes a hard reset issue, by tying a sub-CRQ setup failure and do_enquiry logic into ibmvfc_init_sub_crqs(). Link: https://lore.kernel.org/r/20210302230543.9905-2-tyreld@linux.ibm.com Reviewed-by: Brian King <brking@linux.ibm.com> Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-02vio: make remove callback return voidUwe Kleine-König
The driver core ignores the return value of struct bus_type::remove() because there is only little that can be done. To simplify the quest to make this function return void, let struct vio_driver::remove() return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea. Note there are two nominally different implementations for a vio bus: one in arch/sparc/kernel/vio.c and the other in arch/powerpc/platforms/pseries/vio.c. This patch only adapts the powerpc one. Before this patch for a device that was bound to a driver without a remove callback vio_cmo_bus_remove(viodev) wasn't called. As the device core still considers the device unbound after vio_bus_remove() returns calling this unconditionally is the consistent behaviour which is implemented here. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by: Lijun Pan <ljp@linux.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [mpe: Drop unneeded hvcs_remove() forward declaration, squash in change from sfr to drop ibmvnic_remove() forward declaration] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210225221834.160083-1-uwe@kleine-koenig.org
2021-02-28Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is a few driver updates (iscsi, mpt3sas) that were still in the staging queue when the merge window opened (all committed on or before 8 Feb) and some small bug fixes which came in during the merge window (all committed on 22 Feb)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits) scsi: hpsa: Correct dev cmds outstanding for retried cmds scsi: sd: Fix Opal support scsi: target: tcmu: Fix memory leak caused by wrong uio usage scsi: target: tcmu: Move some functions without code change scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcalloc scsi: aic7xxx: Remove unused function pointer typedef ahc_bus_suspend/resume_t scsi: bnx2fc: Fix Kconfig warning & CNIC build errors scsi: ufs: Fix a duplicate dev quirk number scsi: aic79xx: Fix spelling of version scsi: target: core: Prevent underflow for service actions scsi: target: core: Add cmd length set before cmd complete scsi: iscsi: Drop session lock in iscsi_session_chkready() scsi: qla4xxx: Use iscsi_is_session_online() scsi: libiscsi: Reset max/exp cmdsn during recovery scsi: iscsi_tcp: Fix shost can_queue initialization scsi: libiscsi: Add helper to calculate max SCSI cmds per session scsi: libiscsi: Fix iSCSI host workq destruction scsi: libiscsi: Fix iscsi_task use after free() scsi: libiscsi: Drop taskqueuelock scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling ...
2021-02-22scsi: hpsa: Correct dev cmds outstanding for retried cmdsDon Brace
Prevent incrementing device->commands_outstanding for ioaccel command retries that are driver initiated. If the command goes through the retry path, the device->commands_outstanding counter has already accounted for the number of commands outstanding to the device. Only commands going through function hpsa_cmd_resolve_events decrement this counter. - ioaccel commands go to either HBA disks or to logical volumes comprised of SSDs. The extra increment is causing device resets to hang. - Resets wait for all device outstanding commands to complete before returning. Replace unused field abort_pending with retry_pending. This is a maintenance driver so these changes have the least impact/risk. Link: https://lore.kernel.org/r/161342801747.29388.13045495968308188518.stgit@brunhilda Tested-by: Joe Szczypek <jszczype@redhat.com> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Don Brace <don.brace@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-22scsi: sd: Fix Opal supportBart Van Assche
The SCSI core has been modified recently such that it only processes PM requests if rpm_status != RPM_ACTIVE. Since some Opal requests are submitted while rpm_status != RPM_ACTIVE, set flag RQF_PM for Opal requests. See also https://bugzilla.kernel.org/show_bug.cgi?id=211227. [mkp: updated sha for PM patch] Link: https://lore.kernel.org/r/20210222021042.3534-1-bvanassche@acm.org Fixes: d80210f25ff0 ("sd: add support for TCG OPAL self encrypting disks") Fixes: e6044f714b25 ("scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE") Cc: chriscjsus@yahoo.com Cc: Jens Axboe <axboe@kernel.dk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org Reported-by: chriscjsus@yahoo.com Tested-by: chriscjsus@yahoo.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-22scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcallocJohannes Thumshirn
Dan reported we're passing in GFP_NOIO to kvmalloc() which will then fallback to doing kmalloc() instead of an optional vmalloc() if the size exceeds kmalloc()s limits. This will break with drives that have zone numbers exceeding PAGE_SIZE/sizeof(u32). Instead of passing in GFP_NOIO, enter an implicit GFP_NOIO allocation scope. Link: https://lore.kernel.org/r/YCuvSfKw4qEQBr/t@mwanda Link: https://lore.kernel.org/r/5a6345e2989fd06c049ac4e4627f6acb492c15b8.1613569821.git.johannes.thumshirn@wdc.com Fixes: 5795eb443060: ("scsi: sd_zbc: emulate ZONE_APPEND commands") Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-22scsi: aic7xxx: Remove unused function pointer typedef ahc_bus_suspend/resume_tChen Lin
Remove the 'ahc_bus_suspend/resume_t' typedef as it is not used. Link: https://lore.kernel.org/r/1613389249-3409-1-git-send-email-chen45464546@163.com Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-22scsi: bnx2fc: Fix Kconfig warning & CNIC build errorsRandy Dunlap
CNIC depends on MMU, but since 'select' does not follow any dependency chains, SCSI_BNX2X_FCOE also needs to depend on MMU, so that erroneous configs are not generated, which cause build errors in cnic. WARNING: unmet direct dependencies detected for CNIC Depends on [n]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=n] || IPV6 [=n]=n) && MMU [=n] Selected by [y]: - SCSI_BNX2X_FCOE [=y] && SCSI_LOWLEVEL [=y] && SCSI [=y] && PCI [=y] && (IPV6 [=n] || IPV6 [=n]=n) && LIBFC [=y] && LIBFCOE [=y] riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L154': cnic.c:(.text+0x1094): undefined reference to `uio_event_notify' riscv64-linux-ld: cnic.c:(.text+0x10bc): undefined reference to `uio_event_notify' riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L1442': cnic.c:(.text+0x96a8): undefined reference to `__uio_register_device' riscv64-linux-ld: drivers/net/ethernet/broadcom/cnic.o: in function `.L0 ': cnic.c:(.text.unlikely+0x68): undefined reference to `uio_unregister_device' Link: https://lore.kernel.org/r/20210213192428.22537-1-rdunlap@infradead.org Fixes: 853e2bd2103a ("[SCSI] bnx2fc: Broadcom FCoE offload driver") Cc: Saurav Kashyap <skashyap@marvell.com> Cc: Javed Hasan <jhasan@marvell.com> Cc: GR-QLogic-Storage-Upstream@marvell.com Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-22scsi: ufs: Fix a duplicate dev quirk numberAvri Altman
Fixes: 2b2bfc8aa519 ("scsi: ufs: Introduce a quirk to allow only page-aligned sg entries") Link: https://lore.kernel.org/r/20210211104638.292499-1-avri.altman@wdc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-22scsi: aic79xx: Fix spelling of versionBhaskar Chowdhury
s/verson/version/ Link: https://lore.kernel.org/r/20210209143146.3987352-1-unixbhaskar@gmail.com Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-02-22Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which is bound to cause conflicts with a trivial change somewhere). The only big major rework of note is the one from Hannes trying to clean up our result handling code in the drivers to make it consistent" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits) scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal scsi: ufs: Give clk scaling min gear a value scsi: lpfc: Fix 'physical' typos scsi: megaraid_mbox: Fix spelling of 'allocated' scsi: qla2xxx: Simplify the calculation of variables scsi: message: fusion: Fix 'physical' typos scsi: target: core: Change ASCQ for residual write scsi: target: core: Signal WRITE residuals scsi: target: core: Set residuals for 4Kn devices scsi: hisi_sas: Add trace FIFO debugfs support scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove() scsi: hisi_sas: Enable debugfs support by default scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep() scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe() scsi: lpfc: Add auto select on IRQ_POLL scsi: ncr53c8xx: Fix typos scsi: lpfc: Fix ancient double free scsi: qla2xxx: Fix some memory corruption scsi: qla2xxx: Remove redundant NULL check scsi: megaraid: Fix ifnullfree.cocci warnings ...
2021-02-22Merge tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for eMMC inline encryption - Add a helper function to parse DT properties for clock phases - Some improvements and cleanups for the mmc_test module MMC host: - android-goldfish: Remove driver - cqhci: Add support for eMMC inline encryption - dw_mmc-zx: Remove driver - meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED - mmci: Add support for probing bus voltage level translator - mtk-sd: Address race condition for request timeouts - sdhci_am654: Add Support for the variant on TI's AM64 SoC - sdhci-esdhc-imx: Prevent kernel panic at ->remove() - sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4 - sdhci-msm: Add Inline Crypto Engine support - sdhci-msm: Use actual_clock to improve timeout calculations - sdhci-of-aspeed: Add Andrew Jeffery as maintainer - sdhci-of-aspeed: Extend clock support for the AST2600 variant - sdhci-pci-gli: Increase idle period for low power state for GL9763E - sdhci-pci-o2micro: Make tuning for SDR104 HW more robust - sdhci-sirf: Remove driver - sdhci-xenon: Add support for the AP807 variant - sunxi-mmc: Add support for the A100 variant - sunxi-mmc: Ensure host is suspended during system sleep - tmio: Add detection of data timeout errors - tmio/renesas_sdhi: Extend support for retuning - renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops" * tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits) mmc: sdhci-esdhc-imx: fix kernel panic when remove module mmc: host: Retire MMC_GOLDFISH mmc: cb710: Use new tasklet API mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure mmc: mmc_test: use erase_arg for mmc_erase command mmc: wbsd: Use new tasklet API mmc: via-sdmmc: Use new tasklet API mmc: uniphier-sd: Use new tasklet API mmc: tifm_sd: Use new tasklet API mmc: s3cmci: Use new tasklet API mmc: omap: Use new tasklet API mmc: dw_mmc: Use new tasklet API mmc: au1xmmc: Use new tasklet API mmc: atmel-mci: Use new tasklet API mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ mmc: queue: Remove unused define mmc: core: Drop redundant bouncesz from struct mmc_card mmc: core: Drop redundant member in struct mmc host mmc: core: Use host instead of card argument to mmc_spi_send_csd() mmc: core: Exclude unnecessary header file ...
2021-02-21Merge tag 'sound-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "A relatively calm release at this time, and no massive code changes are found in the stats, while a wide range of code refactoring and cleanup have been done. Note that this update includes the tree-wide trivial changes for dropping the return value from ISA remove callbacks, too. Below lists up some highlight: ALSA Core: - Support for the software jack injection via debugfs - Fixes for sync_stop PCM operations HD-audio and USB-audio: - A few usual HD-audio device quirks - Updates for Tegra HD-audio - More quirks for Pioneer and other USB-audio devices - Stricter state checks at USB-audio disconnection ASoC: - Continued code refactoring, cleanup and fixes in ASoC core API - A KUnit testsuite for the topology code - Lots of ASoC Intel driver Realtek codec updates, quirk additions and fixes - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers Others: - Drop return value from ISA driver remove callback - Cleanup with DIV_ROUND_UP() macro - FireWire updates, HDSP output loopback support" * tag 'sound-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (322 commits) ALSA: hda: intel-dsp-config: add Alder Lake support ASoC: soc-pcm: fix hw param limits calculation for multi-DAI ASoC: Intel: bytcr_rt5640: Add quirk for the Acer One S1002 tablet ASoC: Intel: bytcr_rt5651: Add quirk for the Jumper EZpad 7 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Voyo Winpad A15 tablet ASoC: Intel: bytcr_rt5640: Add quirk for the Estar Beauty HD MID 7316R tablet ASoC: soc-pcm: fix hwparams min/max init for dpcm ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup ALSA: usb-audio: Add implicit fb quirk for BOSS GP-10 ALSA: hda: Add another CometLake-H PCI ID ASoC: soc-pcm: add soc_pcm_hw_update_format() ASoC: soc-pcm: add soc_pcm_hw_update_chan() ASoC: soc-pcm: add soc_pcm_hw_update_rate() ASoC: wm_adsp: Remove unused control callback structure ASoC: SOF: relax ABI checks and avoid unnecessary warnings ASoC: codecs: lpass-tx-macro: add dapm widgets and route ASoC: codecs: lpass-tx-macro: add support for lpass tx macro ASoC: qcom: dt-bindings: add bindings for lpass tx macro codec ASoC: codecs: lpass-rx-macro: add iir widgets ASoC: codecs: lpass-rx-macro: add dapm widgets and route ...
2021-02-21Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "Another nice round of removing more code than what is added, mostly due to Christoph's relentless pursuit of tech debt removal/cleanups. This pull request contains: - Two series of BFQ improvements (Paolo, Jan, Jia) - Block iov_iter improvements (Pavel) - bsg error path fix (Pan) - blk-mq scheduler improvements (Jan) - -EBUSY discard fix (Jan) - bvec allocation improvements (Ming, Christoph) - bio allocation and init improvements (Christoph) - Store bdev pointer in bio instead of gendisk + partno (Christoph) - Block trace point cleanups (Christoph) - hard read-only vs read-only split (Christoph) - Block based swap cleanups (Christoph) - Zoned write granularity support (Damien) - Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)" * tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits) mm: simplify swapdev_block sd_zbc: clear zone resources for non-zoned case block: introduce blk_queue_clear_zone_settings() zonefs: use zone write granularity as block size block: introduce zone_write_granularity limit block: use blk_queue_set_zoned in add_partition() nullb: use blk_queue_set_zoned() to setup zoned devices nvme: cleanup zone information initialization block: document zone_append_max_bytes attribute block: use bi_max_vecs to find the bvec pool md/raid10: remove dead code in reshape_request block: mark the bio as cloned in bio_iov_bvec_set block: set BIO_NO_PAGE_REF in bio_iov_bvec_set block: remove a layer of indentation in bio_iov_iter_get_pages block: turn the nr_iovecs argument to bio_alloc* into an unsigned short block: remove the 1 and 4 vec bvec_slabs entries block: streamline bvec_alloc block: factor out a bvec_alloc_gfp helper block: move struct biovec_slab to bio.c block: reuse BIO_INLINE_VECS for integrity bvecs ...
2021-02-17Merge tag 'asoc-v5.12' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.12 Another quiet release in terms of features, though several of the drivers got quite a bit of work and there were a lot of general changes resulting from Morimoto-san's ongoing cleanup work. - As ever, lots of hard work by Morimoto-san cleaning up the code and making it more consistent. - Many improvements in the Intel drivers including a wide range of quirks and bug fixes. - A KUnit testsuite for the topology code. - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
2021-02-10sd_zbc: clear zone resources for non-zoned caseDamien Le Moal
For host-aware ZBC disk, setting the device zoned model to BLK_ZONED_HA using blk_queue_set_zoned() in sd_read_block_characteristics() may result in the block device effective zoned model to be "none" (BLK_ZONED_NONE) if partitions are present on the device. In this case, sd_zbc_read_zones() should not setup the zone related queue limits for the disk so that the device limits and configuration is consistent with a regular disk and resources not uselessly allocated (e.g. the zone write pointer tracking array for zone append emulation). Furthermore, if the disk zoned model changes at run time due to the creation of a partition by the user, the zone related resources can be released. Fix both problems by introducing the function sd_zbc_clear_zone_info() to reset the scsi disk zone information and free resources and by returning early in sd_zbc_read_zones() for a block device that has a zoned model equal to BLK_ZONED_NONE. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10block: introduce zone_write_granularity limitDamien Le Moal
Per ZBC and ZAC specifications, host-managed SMR hard-disks mandate that all writes into sequential write required zones be aligned to the device physical block size. However, NVMe ZNS does not have this constraint and allows write operations into sequential zones to be aligned to the device logical block size. This inconsistency does not help with software portability across device types. To solve this, introduce the zone_write_granularity queue limit to indicate the alignment constraint, in bytes, of write operations into zones of a zoned block device. This new limit is exported as a read-only sysfs queue attribute and the helper blk_queue_zone_write_granularity() introduced for drivers to set this limit. The function blk_queue_set_zoned() is modified to set this new limit to the device logical block size by default. NVMe ZNS devices as well as zoned nullb devices use this default value as is. The scsi disk driver is modified to execute the blk_queue_zone_write_granularity() helper to set the zone write granularity of host-managed SMR disks to the disk physical block size. The accessor functions queue_zone_write_granularity() and bdev_zone_write_granularity() are also introduced. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-08scsi: iscsi: Drop session lock in iscsi_session_chkready()Mike Christie
The session lock in iscsi_session_chkready() is not needed because when we transition from logged into to another state we will block and/or remove the devices under the session, so no new I/O will be sent to the drivers after the block/remove. I/O that races with the block/removal is cleaned up by the drivers when it handles all outstanding I/O, so this just added an extra lock in the main I/O path. This patch removes the lock like other transport classes. Link: https://lore.kernel.org/r/20210207044608.27585-10-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>