summaryrefslogtreecommitdiff
path: root/drivers/soundwire
AgeCommit message (Collapse)Author
2023-02-24Merge tag 'soundwire-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: "This is a small update which features a bit of core changes and driver updates in Intel and cadence driver. Core: - sdw_transfer_defer() API change to drop an argument - Reset page address rework - Export sdw_nwrite_no_pm and sdw_nread_no_pm APIs Drivers: - Cadence and related intel driver updates for FIFO handling and low level msg transfers" * tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: cadence: further simplify low-level xfer_msg_defer() callback soundwire: cadence: use directly bus sdw_defer structure soundwire: bus: remove sdw_defer argument in sdw_transfer_defer() soundwire: stream: use consistent pattern for freeing buffers soundwire: bus: Remove unused reset_page_addr() callback soundwire: bus: Don't zero page registers after every transaction soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe() soundwire: stream: Move remaining register accesses over to no_pm soundwire: debugfs: Switch to sdw_read_no_pm soundwire: Provide build stubs for common functions soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions soundwire: cadence: remove unused sdw_cdns_master_ops declaration soundwire: enable optional clock registers for SoundWire 1.2 devices ASoC/soundwire: remove is_sdca boolean property soundwire: cadence: Drain the RX FIFO after an IO timeout soundwire: cadence: Remove wasted space in response_buf soundwire: cadence: Don't overflow the command FIFOs soundwire: intel: remove DAI startup/shutdown
2023-02-24Merge tag 'driver-core-6.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...
2023-01-31soundwire: cadence: further simplify low-level xfer_msg_defer() callbackPierre-Louis Bossart
The message pointer is already stored in the bus->defer structure, not need to pass it as an argument. Suggested-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230119073211.85979-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-31soundwire: cadence: use directly bus sdw_defer structurePierre-Louis Bossart
Copying the bus sdw_defer structure into the Cadence internals leads to using stale pointers and kernel oopses on errors. It's just simpler and safer to use the bus sdw_defer structure directly. Link: https://github.com/thesofproject/linux/issues/4056 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230119073211.85979-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-31soundwire: bus: remove sdw_defer argument in sdw_transfer_defer()Pierre-Louis Bossart
There's no point in passing an argument that is a pointer to a bus member. We can directly get the member and do an indirection when needed. This is a first step before simplifying the hardware-specific callbacks further. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230119073211.85979-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-31soundwire: stream: use consistent pattern for freeing buffersPierre-Louis Bossart
The code should free the message buffer used for data, the message structure used for control and assign the latter to NULL. The last part is missing for multi-link cases, and the order is inconsistent for single-link cases. Link: https://github.com/thesofproject/linux/issues/4056 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20230119073211.85979-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-31soundwire: stream: Add specific prep/deprep commands to port_prep callbackStefan Binding
Currently, port_prep callback only has commands for PRE_PREP, PREP, and POST_PREP, which doesn't directly say whether this is for a prepare or deprepare call. Extend the command list enum to say whether the call is for prepare or deprepare aswell. Also remove SDW_OPS_PORT_PREP from sdw_port_prep_ops as this is unused, and update this enum to be simpler and more consistent with enum sdw_clk_stop_type. Note: Currently, the only users of SDW_OPS_PORT_POST_PREP are codec drivers sound/soc/codecs/wsa881x.c and sound/soc/codecs/wsa883x.c, both of which seem to assume that POST_PREP only occurs after a prepare, even though it would also have occurred after a deprepare. Since it doesn't make sense to mark the port prepared after a deprepare, changing the enum to separate PORT_DEPREP from PORT_PREP should make the check for PORT_PREP in those drivers be more logical. Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230127165111.3010960-2-sbinding@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-31soundwire: bus: Remove unused reset_page_addr() callbackRichard Fitzgerald
A previous patch removed unnecessary zeroing of the page registers after a paged transaction, so now the reset_page_addr callback is unused and can be removed. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230123164949.245898-3-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-31soundwire: bus: Don't zero page registers after every transactionRichard Fitzgerald
Zeroing the page registers at the end of every paged transaction is just overhead (40% overhead on a 1-register access, 25% on a 4-register transaction). According to the spec a peripheral that supports paging should only use the values in the page registers if the address is paged (address bit 15 set). The core SoundWire code always writes the page registers at the start of a paged transaction so there will never be a transaction that uses the stale values from a previous paged transaction. For peripherals that need large amounts of data to be transferred, for example firmware or filter coefficients, the overhead of page register zeroing can become quite significant. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230123164949.245898-2-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-31soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe()Richard Fitzgerald
Don't hold sdw_dev_lock while calling the peripheral driver probe() and remove() callbacks. Holding sdw_dev_lock around the probe() and remove() calls causes a theoretical mutex inversion which lockdep will assert on. During probe() the sdw_dev_lock mutex is taken first and then ASoC/ALSA locks are taken by the probe() implementation. During normal operation ASoC can take its locks and then trigger a runtime resume of the component. The SoundWire resume will then take sdw_dev_lock. This is the reverse order compared to probe(). It's not necessary to hold sdw_dev_lock when calling the probe() and remove(), it is only used to prevent the bus core calling the driver callbacks if there isn't a driver or the driver is removing. All calls to the driver callbacks are guarded by the 'probed' flag. So if sdw_dev_lock is held while setting and clearing the 'probed' flag this is sufficient to guarantee the safety of callback functions. Removing the mutex from around the call to probe() means that it is now possible for a bus event (PING response) to be handled in parallel with the probe(). But sdw_bus_probe() already has handling for this by calling the device update_status() after the probe() has completed. Example lockdep assert: [ 46.098514] ====================================================== [ 46.104736] WARNING: possible circular locking dependency detected [ 46.110961] 6.1.0-rc4-jamerson #1 Tainted: G E [ 46.116842] ------------------------------------------------------ [ 46.123063] mpg123/1130 is trying to acquire lock: [ 46.127883] ffff8b445031fb80 (&slave->sdw_dev_lock){+.+.}-{3:3}, at: sdw_update_slave_status+0x26/0x70 [ 46.137225] but task is already holding lock: [ 46.143074] ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.151536] which lock already depends on the new lock.[ 46.159732] the existing dependency chain (in reverse order) is: [ 46.167231] -> #4 (&card->pcm_mutex){+.+.}-{3:3}: [ 46.173428] __mutex_lock+0x94/0x920 [ 46.177542] snd_soc_dpcm_runtime_update+0x2e/0x100 [ 46.182958] snd_soc_dapm_put_enum_double+0x1c2/0x200 [ 46.188548] snd_ctl_elem_write+0x10c/0x1d0 [ 46.193268] snd_ctl_ioctl+0x126/0x850 [ 46.197556] __x64_sys_ioctl+0x87/0xc0 [ 46.201845] do_syscall_64+0x38/0x90 [ 46.205959] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.211553] -> #3 (&card->controls_rwsem){++++}-{3:3}: [ 46.218188] down_write+0x2b/0xd0 [ 46.222038] snd_ctl_add_replace+0x39/0xb0 [ 46.226672] snd_soc_add_controls+0x53/0x80 [ 46.231393] soc_probe_component+0x1e4/0x2a0 [ 46.236202] snd_soc_bind_card+0x51a/0xc80 [ 46.240836] devm_snd_soc_register_card+0x43/0x90 [ 46.246079] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.251500] platform_probe+0x3c/0xa0 [ 46.255700] really_probe+0xde/0x390 [ 46.259814] __driver_probe_device+0x78/0x180 [ 46.264710] driver_probe_device+0x1e/0x90 [ 46.269347] __driver_attach+0x9f/0x1f0 [ 46.273721] bus_for_each_dev+0x78/0xc0 [ 46.278098] bus_add_driver+0x1ac/0x200 [ 46.282473] driver_register+0x8f/0xf0 [ 46.286759] do_one_initcall+0x58/0x310 [ 46.291136] do_init_module+0x4c/0x1f0 [ 46.295422] __do_sys_finit_module+0xb4/0x130 [ 46.300321] do_syscall_64+0x38/0x90 [ 46.304434] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.310027] -> #2 (&card->mutex){+.+.}-{3:3}: [ 46.315883] __mutex_lock+0x94/0x920 [ 46.320000] snd_soc_bind_card+0x3e/0xc80 [ 46.324551] devm_snd_soc_register_card+0x43/0x90 [ 46.329798] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.335219] platform_probe+0x3c/0xa0 [ 46.339420] really_probe+0xde/0x390 [ 46.343532] __driver_probe_device+0x78/0x180 [ 46.348430] driver_probe_device+0x1e/0x90 [ 46.353065] __driver_attach+0x9f/0x1f0 [ 46.357437] bus_for_each_dev+0x78/0xc0 [ 46.361812] bus_add_driver+0x1ac/0x200 [ 46.366716] driver_register+0x8f/0xf0 [ 46.371528] do_one_initcall+0x58/0x310 [ 46.376424] do_init_module+0x4c/0x1f0 [ 46.381239] __do_sys_finit_module+0xb4/0x130 [ 46.386665] do_syscall_64+0x38/0x90 [ 46.391299] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.397416] -> #1 (client_mutex){+.+.}-{3:3}: [ 46.404307] __mutex_lock+0x94/0x920 [ 46.408941] snd_soc_add_component+0x24/0x2c0 [ 46.414345] devm_snd_soc_register_component+0x54/0xa0 [ 46.420522] cs35l56_common_probe+0x280/0x370 [snd_soc_cs35l56] [ 46.427487] cs35l56_sdw_probe+0xf4/0x170 [snd_soc_cs35l56_sdw] [ 46.434442] sdw_drv_probe+0x80/0x1a0 [ 46.439136] really_probe+0xde/0x390 [ 46.443738] __driver_probe_device+0x78/0x180 [ 46.449120] driver_probe_device+0x1e/0x90 [ 46.454247] __driver_attach+0x9f/0x1f0 [ 46.459106] bus_for_each_dev+0x78/0xc0 [ 46.463971] bus_add_driver+0x1ac/0x200 [ 46.468825] driver_register+0x8f/0xf0 [ 46.473592] do_one_initcall+0x58/0x310 [ 46.478441] do_init_module+0x4c/0x1f0 [ 46.483202] __do_sys_finit_module+0xb4/0x130 [ 46.488572] do_syscall_64+0x38/0x90 [ 46.493158] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.499229] -> #0 (&slave->sdw_dev_lock){+.+.}-{3:3}: [ 46.506737] __lock_acquire+0x1121/0x1df0 [ 46.511765] lock_acquire+0xd5/0x300 [ 46.516360] __mutex_lock+0x94/0x920 [ 46.520949] sdw_update_slave_status+0x26/0x70 [ 46.526409] sdw_clear_slave_status+0xd8/0xe0 [ 46.531783] intel_resume_runtime+0x139/0x2a0 [ 46.537155] __rpm_callback+0x41/0x120 [ 46.541919] rpm_callback+0x5d/0x70 [ 46.546422] rpm_resume+0x531/0x7e0 [ 46.550920] __pm_runtime_resume+0x4a/0x80 [ 46.556024] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.562611] __soc_pcm_open+0x62/0x520 [ 46.567375] dpcm_be_dai_startup+0x116/0x210 [ 46.572661] dpcm_fe_dai_open+0xf7/0x830 [ 46.577597] snd_pcm_open_substream+0x54a/0x8b0 [ 46.583145] snd_pcm_open.part.0+0xdc/0x200 [ 46.588341] snd_pcm_playback_open+0x51/0x80 [ 46.593625] chrdev_open+0xc0/0x250 [ 46.598129] do_dentry_open+0x15f/0x430 [ 46.602981] path_openat+0x75e/0xa80 [ 46.607575] do_filp_open+0xb2/0x160 [ 46.612162] do_sys_openat2+0x9a/0x160 [ 46.616922] __x64_sys_openat+0x53/0xa0 [ 46.621767] do_syscall_64+0x38/0x90 [ 46.626352] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.632414] other info that might help us debug this:[ 46.641862] Chain exists of: &slave->sdw_dev_lock --> &card->controls_rwsem --> &card->pcm_mutex[ 46.655145] Possible unsafe locking scenario:[ 46.662048] CPU0 CPU1 [ 46.667080] ---- ---- [ 46.672108] lock(&card->pcm_mutex); [ 46.676267] lock(&card->controls_rwsem); [ 46.683382] lock(&card->pcm_mutex); [ 46.690063] lock(&slave->sdw_dev_lock); [ 46.694574] *** DEADLOCK ***[ 46.701942] 2 locks held by mpg123/1130: [ 46.706356] #0: ffff8b4457b22b90 (&pcm->open_mutex){+.+.}-{3:3}, at: snd_pcm_open.part.0+0xc9/0x200 [ 46.715999] #1: ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.725390] stack backtrace: [ 46.730752] CPU: 0 PID: 1130 Comm: mpg123 Tainted: G E 6.1.0-rc4-jamerson #1 [ 46.739703] Hardware name: AAEON UP-WHL01/UP-WHL01, BIOS UPW1AM19 11/10/2020 [ 46.747270] Call Trace: [ 46.750239] <TASK> [ 46.752857] dump_stack_lvl+0x56/0x73 [ 46.757045] check_noncircular+0x102/0x120 [ 46.761664] __lock_acquire+0x1121/0x1df0 [ 46.766197] lock_acquire+0xd5/0x300 [ 46.770292] ? sdw_update_slave_status+0x26/0x70 [ 46.775432] ? lock_is_held_type+0xe2/0x140 [ 46.780143] __mutex_lock+0x94/0x920 [ 46.784241] ? sdw_update_slave_status+0x26/0x70 [ 46.789387] ? find_held_lock+0x2b/0x80 [ 46.793750] ? sdw_update_slave_status+0x26/0x70 [ 46.798894] ? lock_release+0x147/0x2f0 [ 46.803262] ? lockdep_init_map_type+0x47/0x250 [ 46.808315] ? sdw_update_slave_status+0x26/0x70 [ 46.813456] sdw_update_slave_status+0x26/0x70 [ 46.818422] sdw_clear_slave_status+0xd8/0xe0 [ 46.823302] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.828706] intel_resume_runtime+0x139/0x2a0 [ 46.833583] ? _raw_spin_unlock_irq+0x24/0x50 [ 46.838462] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.843866] __rpm_callback+0x41/0x120 [ 46.848142] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.853550] rpm_callback+0x5d/0x70 [ 46.857568] rpm_resume+0x531/0x7e0 [ 46.861578] ? _raw_spin_lock_irqsave+0x62/0x70 [ 46.866634] __pm_runtime_resume+0x4a/0x80 [ 46.871258] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.877358] __soc_pcm_open+0x62/0x520 [ 46.881634] ? dpcm_add_paths.isra.0+0x35d/0x4c0 [ 46.886784] dpcm_be_dai_startup+0x116/0x210 [ 46.891592] dpcm_fe_dai_open+0xf7/0x830 [ 46.896046] ? debug_mutex_init+0x33/0x50 [ 46.900591] snd_pcm_open_substream+0x54a/0x8b0 [ 46.905658] snd_pcm_open.part.0+0xdc/0x200 [ 46.910376] ? wake_up_q+0x90/0x90 [ 46.914312] snd_pcm_playback_open+0x51/0x80 [ 46.919118] chrdev_open+0xc0/0x250 [ 46.923147] ? cdev_device_add+0x90/0x90 [ 46.927608] do_dentry_open+0x15f/0x430 [ 46.931976] path_openat+0x75e/0xa80 [ 46.936086] do_filp_open+0xb2/0x160 [ 46.940194] ? lock_release+0x147/0x2f0 [ 46.944563] ? _raw_spin_unlock+0x29/0x50 [ 46.949101] do_sys_openat2+0x9a/0x160 [ 46.953377] __x64_sys_openat+0x53/0xa0 [ 46.957733] do_syscall_64+0x38/0x90 [ 46.961829] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.967402] RIP: 0033:0x7fa6397ccd3b [ 46.971506] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 [ 46.991413] RSP: 002b:00007fff838e8990 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 [ 46.999580] RAX: ffffffffffffffda RBX: 0000000000080802 RCX: 00007fa6397ccd3b [ 47.007311] RDX: 0000000000080802 RSI: 00007fff838e8b50 RDI: 00000000ffffff9c [ 47.015047] RBP: 00007fff838e8b50 R08: 0000000000000000 R09: 0000000000000011 [ 47.022787] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080802 [ 47.030539] R13: 0000000000000004 R14: 0000000000000000 R15: 00007fff838e8b50 [ 47.038289] </TASK> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20230123172520.339367-1-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-27driver core: make struct device_type.uevent() take a const *Greg Kroah-Hartman
The uevent() callback in struct device_type should not be modifying the device that is passed into it, so mark it as a const * and propagate the function signature changes out into all relevant subsystems that use this callback. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bard Liao <yung-chuan.liao@linux.intel.com> Cc: Chaitanya Kulkarni <kch@nvidia.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jilin Yuan <yuanjilin@cdjrlc.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Len Brown <lenb@kernel.org> Cc: Mark Gross <markgross@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Maximilian Luz <luzmaximilian@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Sanyog Kale <sanyog.r.kale@intel.com> Cc: Sean Young <sean@mess.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Won Chung <wonchung@google.com> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for Thunderbolt Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230111113018.459199-6-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-09soundwire: stream: Move remaining register accesses over to no_pmCharles Keepax
There is no need to play with the runtime reference everytime a register is accessed. All the remaining "pm" style register accesses trace back to 4 functions: sdw_prepare_stream sdw_deprepare_stream sdw_enable_stream sdw_disable_stream Any sensible implementation will need to hold a runtime reference across all those functions, it makes no sense to be allowing the device/bus to suspend whilst streams are being prepared/enabled. And certainly in the case of the all existing users, they all call these functions from hw_params/prepare/trigger/hw_free callbacks in ALSA, which will have already runtime resumed all the audio devices associated during the open callback. Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221125142028.1118618-5-ckeepax@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-09soundwire: debugfs: Switch to sdw_read_no_pmCharles Keepax
It is rather inefficient to be constantly playing with the runtime PM reference for each individual register, switch to holding a PM runtime reference across the whole register output. Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221125142028.1118618-4-ckeepax@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-09soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functionsSimon Trimmer
The commit 167790abb90f ("soundwire: export sdw_write/read_no_pm functions") exposed the single byte no_pm versions of the IO functions that can be used without touching PM, export the multi byte no_pm versions for the same reason. Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221125142028.1118618-2-ckeepax@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-09soundwire: cadence: remove unused sdw_cdns_master_ops declarationGaosheng Cui
sdw_cdns_master_ops has been removed since commit c91605f48938 ("soundwire: Remove cdns_master_ops"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20220911093442.3221637-1-cuigaosheng1@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-09soundwire: enable optional clock registers for SoundWire 1.2 devicesPierre-Louis Bossart
The bus supports the mandatory clock registers for SDCA devices, these registers can also be optionally supported by SoundWire 1.2 devices that don't follow the SDCA class specification. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221118025807.534863-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-09ASoC/soundwire: remove is_sdca boolean propertyPierre-Louis Bossart
The Device_ID registers already tell us if a device supports the SDCA specification or not, in hindsight we never needed a property when the information is reported by both hardware and ACPI. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20221118025807.534863-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-09soundwire: cadence: Drain the RX FIFO after an IO timeoutRichard Fitzgerald
If wait_for_completion_timeout() times-out in _cdns_xfer_msg() it is possible that something could have been written to the RX FIFO. In this case, we should drain the RX FIFO so that anything in it doesn't carry over and mess up the next transfer. Obviously, if we got to this state something went wrong, and we don't really know the state of everything. The cleanup in this situation cannot be bullet-proof but we should attempt to avoid breaking future transaction, if only to reduce the amount of error noise when debugging the failure from a kernel log. Note that this patch only implements the draining for blocking (non-deferred) transfers. The deferred API doesn't have any proper handling of error conditions and would need some re-design before implementing cleanup. That is a task for a separate patch... Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20221202161812.4186897-4-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-09soundwire: cadence: Remove wasted space in response_bufRichard Fitzgerald
The response_buf was declared much larger (128 entries) than the number of responses that could ever be written into it. The Cadence IP is configurable up to a maximum of 32 entries, and the datasheet says that RX_FIFO_AVAIL can be 2 larger than this. So allow up to 34 responses. Also add checking in cdns_read_response() to prevent overflowing reponse_buf if RX_FIFO_AVAIL contains an unexpectedly large number. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20221202161812.4186897-3-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-09soundwire: cadence: Don't overflow the command FIFOsRichard Fitzgerald
The command FIFOs in the Cadence IP can be configured during design up to 32 entries, and the code in cadence_master.c was assuming the full 32-entry FIFO. But all current Intel implementations use an 8-entry FIFO. Up to now the longest message used was 6 entries so this wasn't causing any problem. But future Cirrus Logic codecs have downloadable firmware or tuning blobs. It is more efficient for the codec driver to issue long transfers that can take advantage of any queuing in the Soundwire controller and avoid the overhead of repeatedly writing the page registers. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Fixes: 2f52a5177caa ("soundwire: cdns: Add cadence library") Link: https://lore.kernel.org/r/20221202161812.4186897-2-rf@opensource.cirrus.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2023-01-09soundwire: intel: remove DAI startup/shutdownPierre-Louis Bossart
The only thing these DAI startup/shutdown callbacks do is play with pm_runtime reference counts. This is not wrong, but it's not necessary at all. At the ASoC core level, only the component matters for pm_runtime. The ASoC core already calls pm_runtime_get_sync() in snd_soc_pcm_component_pm_runtime_get(), before the DAI startup callback is invoked. None of the SoundWire codec drivers rely on pm_runtime helpers in their DAI startup/shutdown either. This adds to the evidence that only the component, or more precisely the device specified when registering a component, should deal with pm_runtime transitions. Beyond the code cleanup, this move prepares for the addition of link power management in the auxiliary device startup/resume/suspend callbacks. The DAI callbacks can by-design assume that the device is already pm_runtime active. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221215085436.2001568-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-12-19Merge tag 'soundwire-6.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: "This include bunch of Intel driver code reorganization and support for qcom v1.7.0 controller: - intel: reorganization of hw_ops callbacks, splitting files etc - qcom: support for v1.7.0 qcom controllers" * tag 'soundwire-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: intel: split auxdevice to different file soundwire: intel: add in-band wake callbacks in hw_ops soundwire: intel: add link power management callbacks in hw_ops soundwire: intel: add bus management callbacks in hw_ops soundwire: intel: add register_dai callback in hw_ops soundwire: intel: add debugfs callbacks in hw_ops soundwire: intel: start using hw_ops dt-bindings: soundwire: Convert text bindings to DT Schema soundwire: cadence: use dai_runtime_array instead of dma_data soundwire: cadence: rename sdw_cdns_dai_dma_data as sdw_cdns_dai_runtime soundwire: qcom: add support for v1.7 Soundwire Controller dt-bindings: soundwire: qcom: add v1.7.0 support soundwire: qcom: make reset optional for v1.6 controller soundwire: qcom: remove unused SWRM_SPECIAL_CMD_ID soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15
2022-11-25ASoC: adau1372: fixes after debugging custom boardMark Brown
Merge series from Maarten Zanders <maarten.zanders@mind.be>: A collection of fixes and improvements for the adau1372 driver.
2022-11-23soundwire: intel_init: remove check on number of linksPierre-Louis Bossart
The number of links is checked with a chip-dependent helper in the caller, remove the check in drivers/soundwire/intel_init.c This change makes intel_init.c hardware-agnostic - which is quite fitting for a layer that only creates auxiliary devices. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20221111042653.45520-8-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-23soundwire: intel_init: remove sdw_intel_enable_irq()Pierre-Louis Bossart
The functionality is implemented with per-chip callbacks, there are no users of this symbol, remove the code. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20221111042653.45520-7-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-23soundwire: intel_init: remove useless interrupt enablement in interrupt threadPierre-Louis Bossart
When the code reaches the SoundWire interrupt thread handling, the interrupt was enabled already, and there is no code that disables it -> this is a no-op sequence. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20221111042653.45520-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-23soundwire: intel: split auxdevice to different filePierre-Louis Bossart
The auxdevice layer is completely generic, it should be split from intel.c which is only geared to the 'cnl' hw_ops now. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221111013135.38289-8-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-23soundwire: intel: add in-band wake callbacks in hw_opsPierre-Louis Bossart
No functionality change, only add indirection for in-band wake management helpers. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221111013135.38289-7-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-23soundwire: intel: add link power management callbacks in hw_opsPierre-Louis Bossart
No functionality change, only add indirection for link power management helpers. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221111013135.38289-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-23soundwire: intel: add bus management callbacks in hw_opsPierre-Louis Bossart
No functionality change, only add indirection for bus management helpers. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221111013135.38289-5-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-23soundwire: intel: add register_dai callback in hw_opsPierre-Louis Bossart
No functionality change, only add indirection for DAI registration helper. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221111013135.38289-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-23soundwire: intel: add debugfs callbacks in hw_opsPierre-Louis Bossart
No functionality change, only add indirection for debugfs helpers. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221111013135.38289-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-23soundwire: intel: start using hw_opsPierre-Louis Bossart
Before introducing new hardware with completely different register spaces and programming sequences, we need to abstract some of the existing routines in hw_ops that will be platform-specific. For now we only use the 'cnl' ops - after the first Intel platform with SoundWire capabilities. Rather than one big intrusive patch, hw_ops are introduced in this patch so show the dependencies between drivers. Follow-up patches will introduce callbacks for debugfs, power and bus management. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221111013135.38289-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-23Merge branch 'fixes' into nextVinod Koul
Merge fixes into next as Intel driver has a dependency
2022-11-09soundwire: cadence: use dai_runtime_array instead of dma_dataPierre-Louis Bossart
Simplify the code with a Cadence-specific dai_runtime_array, indexed with dai->id, instead of abusing dma_data. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221101023521.2384586-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-11-09soundwire: cadence: rename sdw_cdns_dai_dma_data as sdw_cdns_dai_runtimePierre-Louis Bossart
The existing 'struct sdw_cdns_dma_data' has really nothing to do with DMAs. The information is stored in the dai->dma_data, but this is really private data that should be stored in a different context. Beyond the academic elegance discussion, using dma_data is a problem for new Intel hardware where the dma_data structure is already used for true DMA handling performed by other parts of the code. This patch prepares a transition away from the use of dma_data, for now with a rename-only change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221101023521.2384586-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28soundwire: qcom: add support for v1.7 Soundwire ControllerSrinivas Kandagatla
This patch add support for v1.7 SoundWire Controller which has support for Multi-EE (Execution Environment), resulting in a new register and extending field in BUS_CTRL register. With these updates v1.7.0 is fully supported. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221026110210.6575-7-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28soundwire: qcom: make reset optional for v1.6 controllerSrinivas Kandagatla
On Some Qualcomm SOCs like sc8280xp which uses v1.6 soundwire controller reset is not mandatory, so make this an optional one. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221026110210.6575-5-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28soundwire: qcom: remove unused SWRM_SPECIAL_CMD_IDSrinivas Kandagatla
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221026110210.6575-4-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28soundwire: qcom: check for outanding writes before doing a readSrinivas Kandagatla
Reading will increase the fifo count, so check for outstanding cmd wrt. write fifo depth to avoid overflow as read will also increase write fifo cnt. Fixes: a661308c34de ("soundwire: qcom: wait for fifo space to be available before read/write") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221026110210.6575-3-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28soundwire: qcom: reinit broadcast completionSrinivas Kandagatla
For some reason we never reinit the broadcast completion, there is a danger that broadcast commands could be treated as completed by driver from previous complete status. Fix this by reinitializing the completion before sending a broadcast command. Fixes: ddea6cf7b619 ("soundwire: qcom: update register read/write routine") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221026110210.6575-2-srinivas.kandagatla@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-28soundwire: intel: Initialize clock stop timeoutSjoerd Simons
The bus->clk_stop_timeout member is only initialized to a non-zero value during the codec driver probe. This can lead to corner cases where this value remains pegged at zero when the bus suspends, which results in an endless loop in sdw_bus_wait_for_clk_prep_deprep(). Corner cases include configurations with no codecs described in the firmware, or delays in probing codec drivers. Initializing the default timeout to the smallest non-zero value avoid this problem and allows for the existing logic to be preserved: the bus->clk_stop_timeout is set as the maximum required by all codecs connected on the bus. Fixes: 1f2dcf3a154ac ("soundwire: intel: set dev_num_ida_min") Signed-off-by: Sjoerd Simons <sjoerd@collabora.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Chao Song <chao.song@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221020015624.1703950-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-19soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15Pierre-Louis Bossart
Some NUC15 LAPBC710 devices don't expose the same DMI information as the Intel reference, add additional entry in the match table. BugLink: https://github.com/thesofproject/linux/issues/3885 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20221018012500.1592994-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-10-07Merge tag 'soundwire-6.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: "Updates for Intel, Cadence and Qualcomm drivers: - another round of Intel driver cleanup to prepare for future code reorg which is expected in next cycle (Pierre-Louis Bossart) - bus unattach notifications processing during re-enumeration along with Cadence driver updates for this (Richard Fitzgerald) - Qualcomm driver updates to handle device0 status (Srinivas Kandagatla)" * tag 'soundwire-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (42 commits) soundwire: intel: add helper to stop bus soundwire: intel: introduce helpers to start bus soundwire: intel: introduce intel_shim_check_wake() helper soundwire: intel: simplify read ops assignment soundwire: intel: remove intel_init() wrapper soundwire: intel: move shim initialization before power up/down soundwire: intel: remove clock_stop parameter in intel_shim_init() soundwire: intel: move all PDI initialization under intel_register_dai() soundwire: intel: move DAI registration and debugfs init earlier soundwire: intel: simplify flow and use devm_ for DAI registration soundwire: intel: fix error handling on dai registration issues soundwire: cadence: Simplify error paths in cdns_xfer_msg() soundwire: cadence: Fix error check in cdns_xfer_msg() soundwire: cadence: Write to correct address for each FIFO chunk soundwire: bus: Fix wrong port number in sdw_handle_slave_alerts() soundwire: qcom: do not send status of device 0 during alert soundwire: qcom: update status from device id 1 soundwire: cadence: Don't overwrite msg->buf during write commands soundwire: bus: Don't exit early if no device IDs were programmed soundwire: cadence: Fix lost ATTACHED interrupts when enumerating ...
2022-09-20soundwire: intel: add helper to stop busPierre-Louis Bossart
We have three nearly identical sequences to stop the clock, let's introduce a helper to reuse the same code. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220919175721.354679-12-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20soundwire: intel: introduce helpers to start busPierre-Louis Bossart
There are 3 different sequences to start the bus, let's move the functionality to helpers. There should be no functionality change, except in error cases where the flow is improved with more consistent disabling of interrupts and powering down. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220919175721.354679-11-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20soundwire: intel: introduce intel_shim_check_wake() helperPierre-Louis Bossart
Add new helper before code partitioning in order to avoid direct read from specific register. No functionality change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220919175721.354679-10-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20soundwire: intel: simplify read ops assignmentPierre-Louis Bossart
We can assign the right callback directly in the ops structure. No functionality change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220919175721.354679-9-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20soundwire: intel: remove intel_init() wrapperPierre-Louis Bossart
We can directly call intel_link_power_up and do power_up+shim_init in the same function. This simplifies the code with a better symmetry between power_up and power_down operations. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220919175721.354679-8-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-09-20soundwire: intel: move shim initialization before power up/downPierre-Louis Bossart
Move code around before additional simplification. No functionality change. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220919175721.354679-7-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 11:30:57 +0000