summaryrefslogtreecommitdiff
path: root/drivers/staging/rtl8187se
AgeCommit message (Collapse)Author
2011-04-07Merge branch 'staging-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (28 commits) staging: usbip: bugfix for isochronous packets and optimization staging: usbip: bugfix add number of packets for isochronous frames staging: usbip: bugfixes related to kthread conversion staging: usbip: fix shutdown problems. staging: hv: Fix GARP not sent after Quick Migration staging: IIO: IMU: ADIS16400: Avoid using printk facility directly staging: IIO: IMU: ADIS16400: Fix product ID check, skip embedded revision number staging: IIO: IMU: ADIS16400: Make sure only enabled scan_elements are pushed into the ring staging: IIO: IMU: ADIS16400: Fix addresses of GYRO and ACCEL calibration offset staging: IIO: IMU: ADIS16400: Add delay after self test staging: IIO: IMU: ADIS16400: Fix up SPI messages cs_change behavior staging/rtl81*: build as loadable modules only staging: brcm80211: removed 'is_amsdu causing toss' log spam staging: brcm80211: fix for 'Short CCK' log spam staging: brcm80211: fix for 'AC_BE txop..' logs spammed problem staging: memrar: remove driver from tree staging: sep: remove last memrar remnants staging: fix hv_mouse build, needs delay.h staging: fix olpc_dcon build errors staging: sm7xx: fixed defines ... Fix up trivial conflict in drivers/staging/memrar/memrar_handler.c (deleted vs trivial spelling fixes)
2011-04-04staging/rtl81*: build as loadable modules onlyRandy Dunlap
These 3 drivers contain much duplicated (triplicated) code, so building them as built-in results in many errors like: (.text+0x1b160): multiple definition of `ieee80211_sta_ps_sleep' Prevent this configuration by making them all buildable only as loadable modules (similar to the vt665[56] patch last week). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-14staging: rtl8187se: Remove NULL check before kfreeIlia Mirkin
This patch was generated by the following semantic patch: // <smpl> @@ expression E; @@ - if (E != NULL) { kfree(E); } + kfree(E); @@ expression E; @@ - if (E != NULL) { kfree(E); E = NULL; } + kfree(E); + E = NULL; // </smpl> Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07staging: rtl8187se: check kmalloc return valueXiaochen Wang
check kmalloc return value Signed-off-by: Xiaochen Wang <wangxiaochen0@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16staging: rtl8187se: Change panic to warn when RF switch turned offLarry Finger
This driver issues a kernel panic over conditions that do not justify such drastic action. Change these to log entries with a stack dump. This patch fixes the system crash reported in https://bugs.launchpad.net/ubuntu/+source/linux/+bug/674285. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-and-Tested-by: Robie Basik <rb-oss-3@justgohome.co.uk> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-08Staging: rtl8187se: Makefile: replace the use of <module>-objs with <module>-yTracey Dent
Changed <module>-objs to <module>-y in Makefile. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-05Staging: rtl8187se: Makefile: cleaned up Makefile cflag linesTracey Dent
Changed to use the proper ccflags-y option Signed-off-by: Tracey Dent <tdent48227@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-21Staging: rtl8187se: r8185b_init: fixed a lot of checkpatch.pl issuesTracey Dent
Fixed numerous coding style issues using checkpatch.pl Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-21Staging: rtl8187se: r8180_wx: fixed a lot of checkptahc.pl issuesTracey Dent
Fixed numerous coding style issues using checkpatch.pl Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-21Staging: rtl8187se: r8180_rtl8225: fixed a lot of checkpatch.pl issuesTracey Dent
Fixed numerous coding style issues using checkpatch.pl Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-21Staging: rtl8187se: r8180_hw: fixed a lot of checkpatch.pl issuesTracey Dent
Fixed numerous coding style issues using checkpatch.pl Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-21Staging: rtl8187se: r8180.h: fixed alot of checkpatch.pl issuesTracey Dent
Fixed numerous coding style issues Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-04Staging: rtl8186se: Remove a duplicate include directive in ieee80211.hAndre Nogueira
This patch removes a duplicate include directive in drivers/staging/rtl8187se/ieee80211/ieee80211.h. Signed-off-by: Andre Nogueira <andre.neo.net@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31Staging: rtl81*: Fix spelling fuction -> function in commentsStefan Weil
Obviously the wrong spelling was copied a lot of times. A similar patch for the non-staging part of linux is committed by Jiri Kosina. Cc: devel@driverdev.osuosl.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-31staging: rtl8187se: call disable_pci_device() if pci_probe() failedKulikov Vasiliy
Driver should call disable_pci_device() if it returns from pci_probe() with error. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-11param: remove unnecessary writable charpRusty Russell
sysfs-writable charp arguments need to be locked against modification (since the old ones may be kfreed underneath us). String arguments are much simpler, so use them for small strings (eg. IFNAMSIZ). lkdtm only uses the parameters at module initialization time, so there's not much point making them writable. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: M. Mohan Kumar <mohan@in.ibm.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: Julia Lawall <julia@diku.dk> Cc: devel@driverdev.osuosl.org
2010-08-05Staging: Merge staging-next into Linus's treeGreg Kroah-Hartman
Conflicts: drivers/staging/Kconfig drivers/staging/batman-adv/bat_sysfs.c drivers/staging/batman-adv/device.c drivers/staging/batman-adv/hard-interface.c drivers/staging/cx25821/cx25821-audups11.c Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-30Staging: rtl8187se: Fix compile warnings in 2.6.35-rc2Larry Finger
In commit bbfb5652, the spacing in the definitions of eqMacAddr and cpMacAddr in drivers/staging/rtl8187se/r8180_core.c were changed to conform to kernel standards. These definitions were duplicates of lines found in drivers/staging/rtl8187se/ieee80211/dot11d.h. Once the change was made, the following warnings were emitted: CC [M] drivers/staging/rtl8187se/r8180_core.o drivers/staging/rtl8187se/r8180_core.c:69:0: warning: "eqMacAddr" redefined drivers/staging/rtl8187se/ieee80211/dot11d.h:39:0: note: this is the location of the previous definition drivers/staging/rtl8187se/r8180_core.c:70:0: warning: "cpMacAddr" redefined drivers/staging/rtl8187se/ieee80211/dot11d.h:40:0: note: this is the location of the previous definition The fix is to keep only the difinition in the header file. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-18Staging: rtl81xx: Fix build problems when CONFIG_CRYPTO=nAndreas Herrmann
Select CONFIG_CRYPTO for all rtl81xx wireless drivers ... to avoid build problems like: ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8187se/r8187se.ko] undefined! ERROR: "crypto_alloc_base" [drivers/staging/rtl8187se/r8187se.ko] undefined! ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined! ERROR: "crypto_alloc_base" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined! ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined! ERROR: "crypto_alloc_base" [drivers/staging/rtl8192su/r8192s_usb.ko] undefined! ERROR: "crypto_destroy_tfm" [drivers/staging/rtl8192e/r8192e_pci.ko] undefined! ERROR: "crypto_alloc_base" [drivers/staging/rtl8192e/r8192e_pci.ko] undefined! when drivers are built as modules but CONFIG_CRYPTO=n. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-17Staging: Use kmemdupJulia Lawall
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-14Staging: Use kcalloc or kzallocJulia Lawall
Use kcalloc or kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,y,flags; statement S; type T; @@ x = - kmalloc + kcalloc ( - y * sizeof(T), + y, sizeof(T), flags); if (x == NULL) S -memset(x, 0, y * sizeof(T)); @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk>
2010-05-14Staging: rtl8187se: fixed C99 comments style issues in r8180_core.cPrashant P. Shah
This is a patch to the r8180_core.c file that fixes the C99 comments style issues found by the checkpatch.pl tool. Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-14Staging: rtl8187se: fixed space style issues in r8180_core.cPrashant P. Shah
This is a patch to the r8180_core.c file that fixes the space style issues found by the checkpatch.pl tool. Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11Staging: Drop memory allocation castJulia Lawall
Drop cast on the result of kmalloc and similar functions. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; @@ - (T *) (\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11Staging: rtl8187se: fix coding style issues in r8180_core.cJohn Church
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John Church <j.church@ymail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11Staging: rtl8187se: Do not mess with carrier settings while scanningSamuel Ortiz
Toggling the link carrier is a non sense and is the grossest locking I can think of. Moreover, it's giving a completely inaccurate status to userspace who could for example decide to turn the interface down on carrier off detection. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11Staging: rtl8187se: Do not send NULL BSSID events when not associatedSamuel Ortiz
If we're not associated, we should not send wireless events to let userspace know that we just left an ESSID, simply because we havent yet joined it. If we keep on doing that, wpa_supplicant could receive such events while actually trying to join an ESSID, and thus decide to stop trying. This leads to a lot of connection failures as this driver seems to be sending GIWAP events quite a lot. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11Staging: rtl8187se: Do not autoconnect based on probe responseSamuel Ortiz
Getting a probe response after sending a probe request to a specific SSID doesnt mean we're trying to associate with this SSID. wpa_supplicant should be the only one deciding when to join an SSID, not the kernel. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11Staging: rtl8187se: fixed checkpatch.pl warnings and errors in r8180_rtl8225z2.cOlimpiu Pascariu
This is a patch to the r8180_rtl8225z2.c file that fixes up errors and warnings found by the checkpatch.pl tool Signed-off-by: Olimpiu Pascariu <olimpiu.pascariu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-11Staging: rtl8187se: Hoist assign from ifJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-04Staging: merge staging patches into Linus's main branchGreg Kroah-Hartman
There were a number of patches that went into Linus's tree already that conflicted with other changes in the staging branch. This merge resolves those merge conflicts. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: rtl8187se: needs semaphore.hRandy Dunlap
rtl8187se needs to include semaphore.h to prevent build errors: drivers/staging/rtl8187se/ieee80211/ieee80211.h:1004: error: field 'wx_sem' has incomplete type drivers/staging/rtl8187se/ieee80211/ieee80211.h:1005: error: field 'scan_sem' has incomplete type Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: r8187se: Remove dead code from r8185b_init.cLarry Finger
Remove dead code from r8185b_init.c. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: r8187se: Remove two private variables that have a fixed valueLarry Finger
For the RTL8187SE, the variable priv->rf_chip is always RF_ZEBRA4 and priv->RegThreeWireMode is always HW_THREE_WIRE_SI. Remove these 2 variables. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03staging: r8187se: Remove write_phy routineLarry Finger
Remove a routine that is not used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: r8187se: Fix for LED not following radio switchLarry Finger
The current driver does not follow the state of the RF switch. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03staging: r8187se: Change to use common eeprom routines in EEPROM_93CXLarry Finger
The TODO list includes switching this driver to use the common EEPROM routines in EEPROM_93CX. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested by: Bernhard Schiffner <bernhard@schiffner-limbach.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: Fix continuation line formatsJoe Perches
String constants that are continued on subsequent lines with \ are not good. Fixed a "is tryied" / tried typo Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: r8187se: Fix a faulty if and do additional cleanupsLarry Finger
Cleanup the driver and fix a faulty if statement. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested by: Bernhard Schiffner <bernhard@schiffner-limbach.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: rtl8187se: fix if statementDan Carpenter
I removed a misplace semicolon. It is clear from the indentation that TxPwrTracking87SE() was only supposed to be called if CheckTxPwrTracking() returned true. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03staging: fix typos "enalbe" -> "enable"Uwe Kleine-König
This patch was generated by git grep -E -l 'enalbe' drivers/staging | xargs -r perl -p -i -e 's/enalbe/enable/g' Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03Staging: rtl8187x: Use %pM for mac address outputJoe Perches
Uncompiled. Doesn't currently build anyway. Converted MAC_FMT to %pM Converted some %02x%02x%02x%02x%02x%02x to %pm Converted MAC_ARG to direct use Removed MAC_FMT and MAC_ARG macros Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h
2010-01-14Staging: r8187se: Fix compile error from wireless-testing commit 7044cc56Larry Finger
In wireless-testing, commit 7044cc56 added struct ieee80211_hdr_3addr to include/linux/ieee80211.h. This definition collides with one that is in the r8187se driver in staging. The conflict is resolved by changing r8187se to use the definition from include/linuc/ieee80211.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-23Staging: fix rtl8187se compilation errors with mac80211George Kadianakis
This patch fixes compilation problems that were caused by function naming conflicts between the rtl8187se driver and the mac80211 stack. Signed-off-by: George Kadianakis <desnacked at gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: rtl8187se: Rename staging driver to avoid name conflict with ↵Larry Finger
mainline driver Now that active development has begun on a mainline version of a driver for the RTL8187SE that should be called rtl8187se, there is a conflict with the driver in staging with the same name. To solve the conflict, rename the driver in staging to r8187se. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: rtl8187se: Remove card_typeLarry Finger
The vendor-written driver for the RTL8187SE has a private variable for the card type, even though it only occurs in PCI format. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11Staging: rtl8187se: Remove card8185 variable to simplify flowLarry Finger
When this code is used for the rtl8187se, the value of card_8185 in struct r8180_priv is always 7 or 8. As a result, the program flow can be simplified. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Bernhard Schiffner <bernhard@schiffner-limbach.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-04 14:54:48 +0000