| Age | Commit message (Collapse) | Author |
|---|
|
Remove the code from the drivers that we are not going to implement before
submitting for review.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Sort out slot detection on the ca91cx42.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Add support for Master Read-Modify-Write cycles on the ca91cx42.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The ca91cx42 driver currently incorrectly handles master windows, setting
and retrieving the sizing parameters incorrectly. Also, in the slave window
handling, it uses an incorrectly set variable.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Add support for the DMA controller in the ca91cx42 bridge.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The vme_master_resource structure contains an item called "pci_resource".
Rename to make bus agnostic.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
At the moment the vme bridge drivers are written in a way that only
allows them to support one bridge at a time. Modify the drivers to
enable more than one bridge to be present per board.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Check the directions in which the DMA controller is expected to operate
before giving control of a resource.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch corrects author email addresses and Copyright notices as a
result of the split up of the GE Fanuc joint venture.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This driver depends on virt_to_bus working correctly, but it doesn't
exist on ppc64 (and probably other arches).
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The id_table field of the struct pci_driver is constant in <linux/pci.h>
so it is worth to make the initialization data also constant.
The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
struct I1 {
...
const struct I2 *x;
...
};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
struct I1 y = {
.x = E,
};
@c@
identifier r.I2;
identifier s.E;
@@
const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+ const
struct I2 E[] = ...;
// </smpl>
Signed-off-by: Németh Márton <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Unable to build both drivers at the same time due to classing variables that should be declared static but aren't.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Geographical addressing only works if the VME backplane supports it. There
are a large number of old backplanes which do not support geographical
addressing. These boards will generally report a slot ID of zero - which is
an invalid ID in the slot numbering scheme.
Allow the geographical address to be over-ridden on the ca91c142 so that a
slot ID can be provided manually in these circumstances.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Geographical addressing only works if the VME backplane supports it. There
are a large number of old backplanes which do not support geographical
addressing. These boards will generally report a slot ID of zero - which is
an invalid ID in the slot numbering scheme.
Allow the geographical address to be over-ridden on the tsi148 so that a
slot ID can be provided manually in these circumstances.
Signed-off-by: Markus Kraemer <mkraemer@e18.physik.tu-muenchen.de>
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
* Remove message from IACK interrupt handler
* Correct clearing of location monitor interrupts
* Remove interrupt cleanup code that's duplcated in sub function
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The TSI148 driver currently does not allow a size of zero to be passed to a
window. Zero is a valid value if the window is being disabled. Allow
windows to be disabled and their registers cleared.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
It's causing people to ignore problems in the file, so get rid
of them so it's obvious something is wrong in the future.
Cc: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Currently the VME callback infrastructure is replicated in each VME driver.
Move this common code into the VME core. Rename functions to fit in better
with naming of other VME functions.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Remove unused #include <linux/version.h>('s) in
drivers/staging/vme/bridges/vme_ca91cx42.c
drivers/staging/vme/bridges/vme_tsi148.c
drivers/staging/vme/devices/vme_user.c
drivers/staging/vme/vme.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
commit d43c36dc removed sched.h from interrupt.h. This broke the
vme drivers. This patch fixes them.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch starts the reworking of the vme_ca91cx42.c for the VME core. The
driver seems to have only supported the Universe II for a long time, I have no
hardware to check to see if it would work on the Universe I.
This patch is compile tested with minimal run-time testing. It enables basic
support for slave and master windows and interrupts. The master windows have
undergone basic run testing.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Extend the image and DMA channel resource management methods to control the
location monitor resource. The location monitor should be controlled as it can
only be used at a single location at a time.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The VME core and tsi-148 driver currently use semaphores as mutexes. Switch to proper
mutex implementation.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
As identified by Jiri, there is no syncronisation before callback is removed.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
As identified by Jiri, the VME interrupt free routine removes the service
routine before disabling the interrupt. Re-order operations to be performed in
the reverse of the request routine.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Currently this code doesn't compile, so it is disabled.
That should be fixed up...
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
