| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- some fixes for the v4l2 ioctl handler logic
- a fix for an out of bound access in the DVB videobuf2 handler
- three driver fixes (rkvdec, mediatek/vcodek and uvcvideo)
* tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rkvdec: Disable H.264 error detection
media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)
media: dvb_vb2: fix possible out of bound access
media: v4l2-ioctl.c: fix incorrect error path
media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()
media: uvcvideo: Fix InterfaceProtocol for Quanta camera
|
|
Quite often, the HW get stuck in error condition if a stream error
was detected. As documented, the HW should stop immediately and self
reset. There is likely a problem or a miss-understanding of the self
reset mechanism, as unless we make a long pause, the next command
will then report an error even if there is no error in it.
Disabling error detection fixes the issue, and let the decoder continue
after an error. This patch is safe for backport into older kernels.
Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
_Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl()
functions don't do anything except free the "pcmd" pointer. It
results in a use after free. Delete them.
Fixes: 2865d42c78a9 ("staging: r8712u: Add the new driver to the mainline kernel")
Cc: stable <stable@kernel.org>
Reported-by: Zheng Wang <hackerzheng666@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This device is reported as using the RTL8188EUS chip.
It has the improbable USB ID of 0bda:ffef, which normally would belong
to Realtek, but this ID works for the reporter.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20220814175027.2689-1-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The old rtl8188eu module, removed in commit 55dfa29b43d2 ("staging:
rtl8188eu: remove rtl8188eu driver from staging dir") (Linux kernel
v5.15-rc1), required (through a MODULE_FIRMWARE call()) the
rtlwifi/rtl8188eufw.bin firmware file, which the new r8188eu driver no
longer requires.
I have tested a few RTL8188EUS-based Wi-Fi cards and, while supported by
both drivers, they do not work when using the new one and the firmware
wasn't manually loaded. According to Larry Finger, the module
maintainer, all such cards need the firmware and the driver should
depend on it (see the linked mails).
Add a proper MODULE_FIRMWARE() call, like it was done in the old driver.
Thanks to Greg Kroah-Hartman and Larry Finger for quick responses to my
questions.
Cc: stable <stable@kernel.org>
Link: https://answers.launchpad.net/ubuntu/+source/linux-meta-hwe-5.15/+question/702611
Link: https://lore.kernel.org/lkml/YukkBu3TNODO3or9@nx64de-df6d00/
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Link: https://lore.kernel.org/r/YulcdKfhA8dPQ78s@nx64de-df6d00
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver patches for 6.0-rc1.
Another round where we removed more lines of code than added, always a
nice progression. Some of that came from the movement of the vme code
back into staging, and removal of some other of the vme driver code as
there are no known users and it is very obsolete and unmaintained. It
can be added back easily if someone offers to maintain it.
Other than that this merge has lots of little things:
- huge cleanups for r8188eu driver
- minor cleanups for other wifi drivers
- tiny loop fixes for greybus code
- other small coding style fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (191 commits)
staging: r8188eu: fix potential uninitialised variable use in rtw_pwrctrl.c
staging: r8188eu: remove initializer from ret in rtw_pwr_wakeup
staging: vt6655: Convert macro vt6655_mac_clear_stck_ds to function
staging: vt6655: Rename MACvClearStckDS
staging: fbtft: core: set smem_len before fb_deferred_io_init call
staging: r8188eu: convert rtw_pwr_wakeup to correct error code semantics
staging: r8188eu: make dump_chip_info() static
staging: r8188eu: remove DoReserved prototype
staging: r8188eu: remove OnAtim prototype
staging: r8188eu: remove SetHwReg8188EU()
staging: r8188eu: make update_TSF() and correct_TSF() static
staging: r8188eu: remove unused parameter from update_TSF()
staging: r8188eu: remove unused parameter from correct_TSF()
staging: r8188eu: remove HW_VAR_SET_OPMODE from SetHwReg8188EU()
staging: pi433: remove duplicated comments
staging: qlge: refine variable name
staging: vt6655: Convert macro vt6655_mac_word_reg_bits_off to function
staging: vt6655: Convert macro vt6655_mac_reg_bits_off to function
staging: vt6655: Convert macro vt6655_mac_word_reg_bits_on to function
staging: vt6655: Convert macro vt6655_mac_reg_bits_on to function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of Thunderbolt and USB changes for 6.0-rc1.
Lots of little things here, nothing major, just constant development
on some new hardware support and cleanups of older drivers. Highlights
are:
- lots of typec changes and improvements for new hardware
- new gadget controller driver
- thunderbolt support for new hardware
- the normal set of new usb-serial device ids and cleanups
- loads of dwc3 controller fixes and improvements
- mtu3 driver updates
- testusb fixes for longtime issues (not many people use this tool it
seems.)
- minor driver fixes and improvements over the USB tree
- chromeos platform driver changes were added and then reverted as
they depened on some typec changes, but the cross-tree merges
caused problems so they will come back later through the platform
tree.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
usb: misc: onboard_usb_hub: Remove duplicated power_on delay
usb: misc: onboard_usb_hub: Add TI USB8041 hub support
usb: misc: onboard_usb_hub: Add reset-gpio support
USB: usbsevseg: convert sysfs snprintf to sysfs_emit
dt-bindings: usb: Add binding for TI USB8041 hub controller
ARM: multi_v7_defconfig: enable USB onboard HUB driver
ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
usb: typec: ucsi: stm32g0: add bootloader support
usb: typec: ucsi: stm32g0: add support for stm32g0 controller
dt-bindings: usb: typec: add bindings for stm32g0 controller
usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
usb/chipidea: fix repeated words in comments
usb: renesas-xhci: Do not print any log while fw verif success
usb: typec: retimer: Add missing id check in match callback
USB: xhci: Fix comment typo
usb/typec/tcpm: fix repeated words in comments
usb/musb: fix repeated words in comments
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New driver for Semi AR0521 sensor
- rkisp1 CSI code was split into a separate file
- sun6i has gained support for the A31 MIPI CSI-2 controller
- sun8i has gained support for the A83T MIPI CSI-2 controller
- vimc driver got support for virtual lens
- HEVC uAPI has gained its final form and got added to public headers
- hantro and cedrus got updates on H-265 support
- stkwebcam was promoted from staging
- atomisp staging driver got cleanups on its hmm and kmap related logic
- ov5640 gained support for more modes and got some rework
- imx7-media-csi staging driver got several improvements related to mc
API support
- uvcvideo now handles better power line control
- mediatec vcodec gained support for new hardware and got some codec
updates
- Lots of other bug fixes, improvements and cleanups.
* tag 'media/v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (446 commits)
media: hantro: Remove dedicated control documentation
hantro: Remove incorrect HEVC SPS validation
media: cedrus: hevc: Add check for invalid timestamp
media: sunxi: sun6i_mipi_csi2.c/sun8i_a83t_mipi_csi2.c: clarify error handling
media: uvcvideo: Fix invalid pointer in uvc_ctrl_init_ctrl()
media: Documentation: mc-core: Fix typo
media: videodev2.h.rst.exceptions: add missing exceptions
media: vimc: wrong pointer is used with PTR_ERR
media: rkisp1: debug: Add dump file in debugfs for MI main path registers
media: rkisp1: Make the internal CSI-2 receiver optional
media: rkisp1: Add infrastructure to support ISP features
media: rkisp1: Support the ISP parallel input
media: dt-bindings: media: rkisp1: Add port for parallel interface
media: rkisp1: Use fwnode_graph_for_each_endpoint
media: rkisp1: csi: Plumb the CSI RX subdev
media: rkisp1: csi: Implement a V4L2 subdev for the CSI receiver
media: rkisp1: isp: Disallow multiple active sources
media: rkisp1: isp: Rename rkisp1_get_remote_source()
media: rkisp1: isp: Constify various local variables
media: rkisp1: isp: Fix whitespace issues
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Paolo Abeni:
"Core:
- Refactor the forward memory allocation to better cope with memory
pressure with many open sockets, moving from a per socket cache to
a per-CPU one
- Replace rwlocks with RCU for better fairness in ping, raw sockets
and IP multicast router.
- Network-side support for IO uring zero-copy send.
- A few skb drop reason improvements, including codegen the source
file with string mapping instead of using macro magic.
- Rename reference tracking helpers to a more consistent netdev_*
schema.
- Adapt u64_stats_t type to address load/store tearing issues.
- Refine debug helper usage to reduce the log noise caused by bots.
BPF:
- Improve socket map performance, avoiding skb cloning on read
operation.
- Add support for 64 bits enum, to match types exposed by kernel.
- Introduce support for sleepable uprobes program.
- Introduce support for enum textual representation in libbpf.
- New helpers to implement synproxy with eBPF/XDP.
- Improve loop performances, inlining indirect calls when possible.
- Removed all the deprecated libbpf APIs.
- Implement new eBPF-based LSM flavor.
- Add type match support, which allow accurate queries to the eBPF
used types.
- A few TCP congetsion control framework usability improvements.
- Add new infrastructure to manipulate CT entries via eBPF programs.
- Allow for livepatch (KLP) and BPF trampolines to attach to the same
kernel function.
Protocols:
- Introduce per network namespace lookup tables for unix sockets,
increasing scalability and reducing contention.
- Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.
- Add support to forciby close TIME_WAIT TCP sockets via user-space
tools.
- Significant performance improvement for the TLS 1.3 receive path,
both for zero-copy and not-zero-copy.
- Support for changing the initial MTPCP subflow priority/backup
status
- Introduce virtually contingus buffers for sockets over RDMA, to
cope better with memory pressure.
- Extend CAN ethtool support with timestamping capabilities
- Refactor CAN build infrastructure to allow building only the needed
features.
Driver API:
- Remove devlink mutex to allow parallel commands on multiple links.
- Add support for pause stats in distributed switch.
- Implement devlink helpers to query and flash line cards.
- New helper for phy mode to register conversion.
New hardware / drivers:
- Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.
- Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.
- Ethernet DSA driver for the Microchip LAN937x switch.
- Ethernet PHY driver for the Aquantia AQR113C EPHY.
- CAN driver for the OBD-II ELM327 interface.
- CAN driver for RZ/N1 SJA1000 CAN controller.
- Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.
Drivers:
- Intel Ethernet NICs:
- i40e: add support for vlan pruning
- i40e: add support for XDP framented packets
- ice: improved vlan offload support
- ice: add support for PPPoE offload
- Mellanox Ethernet (mlx5)
- refactor packet steering offload for performance and scalability
- extend support for TC offload
- refactor devlink code to clean-up the locking schema
- support stacked vlans for bridge offloads
- use TLS objects pool to improve connection rate
- Netronome Ethernet NICs (nfp):
- extend support for IPv6 fields mangling offload
- add support for vepa mode in HW bridge
- better support for virtio data path acceleration (VDPA)
- enable TSO by default
- Microsoft vNIC driver (mana)
- add support for XDP redirect
- Others Ethernet drivers:
- bonding: add per-port priority support
- microchip lan743x: extend phy support
- Fungible funeth: support UDP segmentation offload and XDP xmit
- Solarflare EF100: add support for virtual function representors
- MediaTek SoC: add XDP support
- Mellanox Ethernet/IB switch (mlxsw):
- dropped support for unreleased H/W (XM router).
- improved stats accuracy
- unified bridge model coversion improving scalability (parts 1-6)
- support for PTP in Spectrum-2 asics
- Broadcom PHYs
- add PTP support for BCM54210E
- add support for the BCM53128 internal PHY
- Marvell Ethernet switches (prestera):
- implement support for multicast forwarding offload
- Embedded Ethernet switches:
- refactor OcteonTx MAC filter for better scalability
- improve TC H/W offload for the Felix driver
- refactor the Microchip ksz8 and ksz9477 drivers to share the
probe code (parts 1, 2), add support for phylink mac
configuration
- Other WiFi:
- Microchip wilc1000: diable WEP support and enable WPA3
- Atheros ath10k: encapsulation offload support
Old code removal:
- Neterion vxge ethernet driver: this is untouched since more than 10 years"
* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
doc: sfp-phylink: Fix a broken reference
wireguard: selftests: support UML
wireguard: allowedips: don't corrupt stack when detecting overflow
wireguard: selftests: update config fragments
wireguard: ratelimiter: use hrtimer in selftest
net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
net: usb: ax88179_178a: Bind only to vendor-specific interface
selftests: net: fix IOAM test skip return code
net: usb: make USB_RTL8153_ECM non user configurable
net: marvell: prestera: remove reduntant code
octeontx2-pf: Reduce minimum mtu size to 60
net: devlink: Fix missing mutex_unlock() call
net/tls: Remove redundant workqueue flush before destroy
net: txgbe: Fix an error handling path in txgbe_probe()
net: dsa: Fix spelling mistakes and cleanup code
Documentation: devlink: add add devlink-selftests to the table of contents
dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
net: ionic: fix error check for vlan flags in ionic_set_nic_features()
net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
nfp: flower: add support for tunnel offload without key ID
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Enable mirrored memory for arm64
- Fix up several abuses of the efivar API
- Refactor the efivar API in preparation for moving the 'business
logic' part of it into efivarfs
- Enable ACPI PRM on arm64
* tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
ACPI: Move PRM config option under the main ACPI config
ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64
ACPI: PRM: Change handler_addr type to void pointer
efi: Simplify arch_efi_call_virt() macro
drivers: fix typo in firmware/efi/memmap.c
efi: vars: Drop __efivar_entry_iter() helper which is no longer used
efi: vars: Use locking version to iterate over efivars linked lists
efi: pstore: Omit efivars caching EFI varstore access layer
efi: vars: Add thin wrapper around EFI get/set variable interface
efi: vars: Don't drop lock in the middle of efivar_init()
pstore: Add priv field to pstore_record for backend specific use
Input: applespi - avoid efivars API and invoke EFI services directly
selftests/kexec: remove broken EFI_VARS secure boot fallback check
brcmfmac: Switch to appropriate helper to load EFI variable contents
iwlwifi: Switch to proper EFI variable store interface
media: atomisp_gmin_platform: stop abusing efivar API
efi: efibc: avoid efivar API for setting variables
efi: avoid efivars layer when loading SSDTs from variables
efi: Correct comment on efi_memmap_alloc
memblock: Disable mirror feature if kernelcore is not specified
...
|
|
Set ret to 0 (success) before entering first if statement, thereby
assuring that even if the device is not associated and further checks
pass, we do not then end up returning the uninitialized value of ret.
This assignment is deliberately now directly before the if statement, in
order to keep it clear what is happening as opposed to having it as an
initialization at the start of the function like it was originally.
Also add a comment to make it clear this first if block is currently a
success path. As a side note, smatch does not trigger warnings for this
change, for me at least.
Within core/rtw_pwrctrl.c in the rtw_pwr_wakeup function, I previously
dropped the initialization of 'ret' (int ret = 0;) in favour of its
assignment which happens inside the first if block directly before its
corresponding goto. This was the cause of this bug, and was introduced
by: commit f3a76018dd55 ("staging: r8188eu: remove initializer from ret
in rtw_pwr_wakeup").
Fixes: f3a76018dd55 ("staging: r8188eu: remove initializer from ret in rtw_pwr_wakeup")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220730235910.1145-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the success initializer from the ret variable in rtw_pwr_wakeup,
as we set it later anyway in the success path, and also set on failure.
This makes the function appear cleaner and more consistent.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220728231150.972-2-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert once used macro to static function. Multiline macros are not
liked by kernel community. Rename variable byOrgValue to reg_value to
avoid CamelCase which is not accepted by checkpatch.pl. Change variable
declaration to u8 as this improves readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/cbfe5cc170b68564ff45bb7f45c63de241c2a664.1658986804.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rename MACvClearStckDS macro to vt6655_mac_clear_stck_ds to avoid
CamelCase which is not accepted by checkpatch.pl and to clean up
namespace.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/8ba4413d52e95406393755f48da065511b891f03.1658986804.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fbtft_framebuffer_alloc() calls fb_deferred_io_init() before
initializing info->fix.smem_len. It is set to zero by the
framebuffer_alloc() function. It will trigger a WARN_ON() at the
start of fb_deferred_io_init() and the function will not do anything.
Fixes: 856082f021a2 ("fbdev: defio: fix the pagelist corruption")
Signed-off-by: Peter Suti <peter.suti@streamunlimited.com>
Link: https://lore.kernel.org/r/20220727073550.1491126-1-peter.suti@streamunlimited.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the driver tries to validat the HEVC SPS
against the CAPTURE queue format (i.e. the decoded format).
This is not correct, because typically the SPS control is set
before the CAPTURE queue is negotiated.
Fixes: 135ad96cb4d6b ("media: hantro: Be more accurate on pixel formats step_width constraints")
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Not all DPB entries will be used most of the time. Unused entries will
thus have invalid timestamps. They will produce negative buffer index
which is not specifically handled. This works just by chance in current
code. It will even produce bogus pointer, but since it's not used, it
won't do any harm.
Let's fix that brittle design by skipping writing DPB entry altogether
if timestamp is invalid.
Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Convert the rtw_pwr_wakeup function to use 0 on success and an appropriate
error code on error. For the first failure block where ips_leave is
invoked, use -ENOMEM as this is the main cause of failure here anyway.
For the second failure block, use -EBUSY, as it seems the most
appropriate.
Finally, within the functions rtw_wx_set_mode, rtw_wx_set_wap,
rtw_wx_set_scan and rtw_wx_set_essid, pass the error code on from
rtw_pwr_wakeup as appropriate now that it is converted.
This gets the driver closer to removal of the non-standard _SUCCESS and
_FAIL definitions, which are inverted compared to the standard in-kernel
error code mechanism.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220725220745.12739-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function dump_chip_info() is only used in rtl8188e_hal_init.c.
Make it static to reduce the driver object file size by 281 bytes.
before:
text data bss dec hex filename
530606 43897 7072 581575 8dfc7 drivers/staging/r8188eu/r8188eu.o
after:
text data bss dec hex filename
530405 43817 7072 581294 8deae drivers/staging/r8188eu/r8188eu.o
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220724182520.7794-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The DoReserved function was removed in commit 869ddbfccdea ("staging:
r8188eu: remove dummy entries from OnAction_tbl"). Remove the prototype
as well.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220724153349.138741-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The OnAtim function was removed in commit 6d933902c609 ("staging: r8188eu:
remove OnAtim"). Remove the prototype as well.
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220724153349.138741-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the case HW_VAR_CORRECT_TSF from SetHwReg8188EU() and move the
functionality to the function that calls SetHwReg8188EU() with
HW_VAR_CORRECT_TSF. SetHwReg8188EU() is empty now and we can finally
remove it.
Tested-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220715062908.8547-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions update_TSF() and correct_TSF() are only used in
rtw_mlme_ext.c. Make them static.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220715062908.8547-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The parameter 'len' of update_TSF() is unused. Remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220715062908.8547-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The parameter 'pmlmeext' of correct_TSF() is unused. Remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220715062908.8547-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the HW_VAR_SET_OPMODE case from SetHwReg8188EU() and move the
functions that are called by that case to rtw_mlme_ext.c. This is part
of the ongoing effort to get rid of SetHwReg8188EU().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220715062908.8547-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove duplicated words in comments for readability. The words are
duplicated from a sentence below.
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Link: https://lore.kernel.org/r/20220725114513.85089-1-realwakka@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
tmp as a variable name don't have much information, change tmp to dma.
Signed-off-by: Binyi Han <dantengknight@gmail.com>
Link: https://lore.kernel.org/r/20220715061754.GA6657@cloud-MacBookPro
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver has a copy of some of the CDC defines but which are
currently unused.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20220725075841.1187-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
media_pad_remote_pad_first()
The media_entity_remote_pad() is misnamed, as it operates on a pad and
not an entity. Rename it to media_pad_remote_pad_first() to clarify its
behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use the newly introduced vb2_find_buffer API to get a vb2_buffer
given a buffer timestamp.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Tiles are last remaining unimplemented functionality for HEVC. Implement
it.
[hverkuil: fix checkpatch warning, split long line in two]
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that controls can be dynamic arrays, we need to know how many
elements are in such array. Add a helper for that.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that we have infrastructure for reporting errors, let's add two
checks, which will make sure slice can be actually decoded.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
During decoding setup stage for complex codecs like HEVC driver can
detect inconsistent values in controls or some other task, like
allocating memory, can fail.
Currently setup stage has no way of signalling error. Change return type
of setup callback to int and if returned value is not zero, skip
decoding and finish job immediately with error flag.
While currently there is only one place when setup can fail, it's
expected that there will be more such cases in the future, when HEVC
decoding is improved.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Currently error messages when control creation fails are very sparse.
Granted, user should never observe them. However, developer working on
codecs can. In such cases additional information like which control
creation failed and error number are very useful.
Expand error messages with additional info.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that we know real purpose of "not low delay" flag, logic for
applying this flag should be fixed too. According to vendor and
reference implementation, low delay is signaled when POC of current
frame is lower than POC of at least one reference of a slice.
Implement mentioned logic and invert it to conform to flag meaning. Also
don't apply flag for I frames. They don't have any reference.
This fixes decoding of 3 reference bitstreams.
Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Bit 21 in register 0x24 (slice header info 1) actually represents
negated version of low delay flag. This can be seen in vendor Cedar
library source code. While this flag is not part of the standard, it can
be found in reference HEVC implementation.
Fix macro name and change it to flag.
Fixes: 86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that infrastructure for 10-bit decoding exists, enable it for
Allwinner H6.
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Now that we have proper infrastructure for postprocessing 10-bit
formats, store VP9 bit depth in context.
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Currently chroma offset calculation assumes only 1 byte per luma, with
no consideration for stride.
Take necessary information from destination pixel format which makes
calculation completely universal.
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Some postproc legacy registers were set in VP9 code. Move them to
postproc and fix their value.
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When allocating aux buffers for postprocessing, it's assumed that base
buffer size is the same as that of output. Coincidentally, that's true
most of the time, but not always. 10-bit source also needs aux buffer
size which is appropriate for 10-bit native format, even if the output
format is 8-bit. Similarly, mv sizes and other extra buffer size also
depends on source width/height, not destination.
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In preparation for supporting 10-bit formats, add mechanism which will
filter formats based on pixel depth.
Hantro G2 supports only one decoding format natively and that is based
on bit depth of current video frame. Additionally, it makes no sense to
upconvert bitness, so filter those out too.
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
'F.7.3.6.1 General slice segment header syntax' section of HEVC
specification describes that a slice header always end aligned on
byte boundary, therefore we only need to provide the data offset in bytes.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The number of bits to skip in the slice header can be computed
in the driver by using sps, pps and decode_params information.
This makes it possible to remove Hantro dedicated control.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
array
Make explicit that V4L2_CID_STATELESS_HEVC_SLICE_PARAMS control is
a dynamic array control type.
Some drivers may be able to receive multiple slices in one control
to improve decoding performance.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The HEVC specification describes the following:
"PicOrderCntVal is derived as follows:
PicOrderCntVal = PicOrderCntMsb + slice_pic_order_cnt_lsb
The value of PicOrderCntVal shall be in the range of
−2^31 to 2^31 − 1, inclusive."
To match with these definitions change __u16 pic_order_cnt[2]
into __s32 pic_order_cnt_val.
Change v4l2_ctrl_hevc_slice_params->slice_pic_order_cnt to __s32 too.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
