summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)Author
2021-11-26scsi: target: Fix alua_tg_pt_gps_count trackingMike Christie
[ Upstream commit 1283c0d1a32bb924324481586b5d6e8e76f676ba ] We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's still accessed via configfs. Its release must go through the normal configfs/refcount process. The max alua_tg_pt_gps_count check should probably have been done in core_alua_allocate_tg_pt_gp(), but with the current code userspace could have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff. Then it could have deleted a group with an ID set, and then set the ID for that extra group and it would work ok. It's unlikely, but just in case this patch continues to allow that type of behavior, and just fixes the kfree() while in use bug. Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-26scsi: target: Fix ordered tag handlingMike Christie
[ Upstream commit ed1227e080990ffec5bf39006ec8a57358e6689a ] This patch fixes the following bugs: 1. If there are multiple ordered cmds queued and multiple simple cmds completing, target_restart_delayed_cmds() could be called on different CPUs and each instance could start a ordered cmd. They could then run in different orders than they were queued. 2. target_restart_delayed_cmds() and target_handle_task_attr() can race where: 1. target_handle_task_attr() has passed the simple_cmds == 0 check. 2. transport_complete_task_attr() then decrements simple_cmds to 0. 3. transport_complete_task_attr() runs target_restart_delayed_cmds() and it does not see any cmds on the delayed_cmd_list. 4. target_handle_task_attr() adds the cmd to the delayed_cmd_list. The cmd will then end up timing out. 3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute them out of order, because target_handle_task_attr() will hit that simple_cmds check first and return false for all ordered cmds sent. 4. We run target_restart_delayed_cmds() after every cmd completion, so if there is more than 1 simple cmd running, we start executing ordered cmds after that first cmd instead of waiting for all of them to complete. 5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older cmds have completed, and not just simple. 6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock for every cmd completion when ordered cmds are almost never used. Just replacing that lock with an atomic increases IOPs by up to 10% when completions are spread over multiple CPUs and there are multiple sessions/ mqs/thread accessing the same device. This patch moves the queued delayed handling to a per device work to serialze the cmd executions for each device and adds a new counter to track HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to determine when to run the work on the completion path. Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28scsi: target: Fix protect handling in WRITE SAME(32)Dmitry Bogdanov
[ Upstream commit 6d8e7e7c932162bccd06872362751b0e1d76f5af ] WRITE SAME(32) command handling reads WRPROTECT at the wrong offset in 1st byte instead of 10th byte. Link: https://lore.kernel.org/r/20210702091655.22818-1-d.bogdanov@yadro.com Fixes: afd73f1b60fc ("target: Perform PROTECT sanity checks for WRITE_SAME") Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-30scsi: target: core: Fix warning on realtime kernelsMaurizio Lombardi
[ Upstream commit 515da6f4295c2c42b8c54572cce3d2dd1167c41e ] On realtime kernels, spin_lock_irq*(spinlock_t) do not disable the interrupts, a call to irqs_disabled() will return false thus firing a warning in __transport_wait_for_tasks(). Remove the warning and also replace assert_spin_locked() with lockdep_assert_held() Link: https://lore.kernel.org/r/20210531121326.3649-1-mlombard@redhat.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22scsi: target: pscsi: Fix warning in pscsi_complete_cmd()Chaitanya Kulkarni
[ Upstream commit fd48c056a32ed6e7754c7c475490f3bed54ed378 ] This fixes a compilation warning in pscsi_complete_cmd(): drivers/target/target_core_pscsi.c: In function ‘pscsi_complete_cmd’: drivers/target/target_core_pscsi.c:624:5: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ; /* XXX: TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE */ Link: https://lore.kernel.org/r/20210228055645.22253-5-chaitanya.kulkarni@wdc.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-10scsi: target: pscsi: Clean up after failure in pscsi_map_sg()Martin Wilck
[ Upstream commit 36fa766faa0c822c860e636fe82b1affcd022974 ] If pscsi_map_sg() fails, make sure to drop references to already allocated bios. Link: https://lore.kernel.org/r/20210323212431.15306-2-mwilck@suse.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-12scsi: target: Fix XCOPY NAA identifier lookupDavid Disseldorp
commit 2896c93811e39d63a4d9b63ccf12a8fbc226e5e4 upstream. When attempting to match EXTENDED COPY CSCD descriptors with corresponding se_devices, target_xcopy_locate_se_dev_e4() currently iterates over LIO's global devices list which includes all configured backstores. This change ensures that only initiator-accessible backstores are considered during CSCD descriptor lookup, according to the session's se_node_acl LUN list. To avoid LUN removal race conditions, device pinning is changed from being configfs based to instead using the se_node_acl lun_ref. Reference: CVE-2020-28374 Fixes: cbf031f425fd ("target: Add support for EXTENDED_COPY copy offload emulation") Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-02scsi: target: iscsi: Fix cmd abort fabric stop raceMike Christie
[ Upstream commit f36199355c64a39fe82cfddc7623d827c7e050da ] Maurizio found a race where the abort and cmd stop paths can race as follows: 1. thread1 runs iscsit_release_commands_from_conn and sets CMD_T_FABRIC_STOP. 2. thread2 runs iscsit_aborted_task and then does __iscsit_free_cmd. It then returns from the aborted_task callout and we finish target_handle_abort and do: target_handle_abort -> transport_cmd_check_stop_to_fabric -> lio_check_stop_free -> target_put_sess_cmd The cmd is now freed. 3. thread1 now finishes iscsit_release_commands_from_conn and runs iscsit_free_cmd while accessing a command we just released. In __target_check_io_state we check for CMD_T_FABRIC_STOP and set the CMD_T_ABORTED if the driver is not cleaning up the cmd because of a session shutdown. However, iscsit_release_commands_from_conn only sets the CMD_T_FABRIC_STOP and does not check to see if the abort path has claimed completion ownership of the command. This adds a check in iscsit_release_commands_from_conn so only the abort or fabric stop path cleanup the command. Link: https://lore.kernel.org/r/1605318378-9269-1-git-send-email-michael.christie@oracle.com Reported-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23scsi: target: iscsi: Fix hang in iscsit_access_np() when getting ↵Hou Pu
tpg->np_login_sem commit ed43ffea78dcc97db3f561da834f1a49c8961e33 upstream. The iSCSI target login thread might get stuck with the following stack: cat /proc/`pidof iscsi_np`/stack [<0>] down_interruptible+0x42/0x50 [<0>] iscsit_access_np+0xe3/0x167 [<0>] iscsi_target_locate_portal+0x695/0x8ac [<0>] __iscsi_target_login_thread+0x855/0xb82 [<0>] iscsi_target_login_thread+0x2f/0x5a [<0>] kthread+0xfa/0x130 [<0>] ret_from_fork+0x1f/0x30 This can be reproduced via the following steps: 1. Initiator A tries to log in to iqn1-tpg1 on port 3260. After finishing PDU exchange in the login thread and before the negotiation is finished the the network link goes down. At this point A has not finished login and tpg->np_login_sem is held. 2. Initiator B tries to log in to iqn2-tpg1 on port 3260. After finishing PDU exchange in the login thread the target expects to process remaining login PDUs in workqueue context. 3. Initiator A' tries to log in to iqn1-tpg1 on port 3260 from a new socket. A' will wait for tpg->np_login_sem with np->np_login_timer loaded to wait for at most 15 seconds. The lock is held by A so A' eventually times out. 4. Before A' got timeout initiator B gets negotiation failed and calls iscsi_target_login_drop()->iscsi_target_login_sess_out(). The np->np_login_timer is canceled and initiator A' will hang forever. Because A' is now in the login thread, no new login requests can be serviced. Fix this by moving iscsi_stop_login_thread_timer() out of iscsi_target_login_sess_out(). Also remove iscsi_np parameter from iscsi_target_login_sess_out(). Link: https://lore.kernel.org/r/20200729130343.24976-1-houpu@bytedance.com Cc: stable@vger.kernel.org Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Hou Pu <houpu@bytedance.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23scsi: target: iscsi: Fix data digest calculationVarun Prakash
commit 5528d03183fe5243416c706f64b1faa518b05130 upstream. Current code does not consider 'page_off' in data digest calculation. To fix this, add a local variable 'first_sg' and set first_sg.offset to sg->offset + page_off. Link: https://lore.kernel.org/r/1598358910-3052-1-git-send-email-varun@chelsio.com Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Cc: <stable@vger.kernel.org> Reviewed-by: Mike Christie <michael.christie@oralce.com> Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03scsi: target: tcmu: Fix crash on ARM during cmd completionBodo Stroesser
[ Upstream commit 5a0c256d96f020e4771f6fd5524b80f89a2d3132 ] If tcmu_handle_completions() has to process a padding shorter than sizeof(struct tcmu_cmd_entry), the current call to tcmu_flush_dcache_range() with sizeof(struct tcmu_cmd_entry) as length param is wrong and causes crashes on e.g. ARM, because tcmu_flush_dcache_range() in this case calls flush_dcache_page(vmalloc_to_page(start)); with start being an invalid address above the end of the vmalloc'ed area. The fix is to use the minimum of remaining ring space and sizeof(struct tcmu_cmd_entry) as the length param. The patch was tested on kernel 4.19.118. See https://bugzilla.kernel.org/show_bug.cgi?id=208045#c10 Link: https://lore.kernel.org/r/20200629093756.8947-1-bstroesser@ts.fujitsu.com Tested-by: JiangYu <lnsyyj@hotmail.com> Acked-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-05scsi: target/iblock: fix WRITE SAME zeroingDavid Disseldorp
commit 1d2ff149b263c9325875726a7804a0c75ef7112e upstream. SBC4 specifies that WRITE SAME requests with the UNMAP bit set to zero "shall perform the specified write operation to each LBA specified by the command". Commit 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") modified the iblock backend to call blkdev_issue_zeroout() when handling WRITE SAME requests with UNMAP=0 and a zero data segment. The iblock blkdev_issue_zeroout() call incorrectly provides a flags parameter of 0 (bool false), instead of BLKDEV_ZERO_NOUNMAP. The bool false parameter reflects the blkdev_issue_zeroout() API prior to commit ee472d835c26 ("block: add a flags argument to (__)blkdev_issue_zeroout") which was merged shortly before 2237498f0b5c. Link: https://lore.kernel.org/r/20200419163109.11689-1-ddiss@suse.de Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Disseldorp <ddiss@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02scsi: target: fix PR IN / READ FULL STATUS for FCBodo Stroesser
[ Upstream commit 8fed04eb79a74cbf471dfaa755900a51b37273ab ] Creation of the response to READ FULL STATUS fails for FC based reservations. Reason is the too high loop limit (< 24) in fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is executed a last time for the ending '\0' of the string and thus hex2bin() reports an error. Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.com Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24scsi: target: fix hang when multiple threads try to destroy the same iscsi ↵Maurizio Lombardi
session [ Upstream commit 57c46e9f33da530a2485fa01aa27b6d18c28c796 ] A number of hangs have been reported against the target driver; they are due to the fact that multiple threads may try to destroy the iscsi session at the same time. This may be reproduced for example when a "targetcli iscsi/iqn.../tpg1 disable" command is executed while a logout operation is underway. When this happens, two or more threads may end up sleeping and waiting for iscsit_close_connection() to execute "complete(session_wait_comp)". Only one of the threads will wake up and proceed to destroy the session structure, the remaining threads will hang forever. Note that if the blocked threads are somehow forced to wake up with complete_all(), they will try to free the same iscsi session structure destroyed by the first thread, causing double frees, memory corruptions etc... With this patch, the threads that want to destroy the iscsi session will increase the session refcount and will set the "session_close" flag to 1; then they wait for the driver to close the remaining active connections. When the last connection is closed, iscsit_close_connection() will wake up all the threads and will wait for the session's refcount to reach zero; when this happens, iscsit_close_connection() will destroy the session structure because no one is referencing it anymore. INFO: task targetcli:5971 blocked for more than 120 seconds. Tainted: P OE 4.15.0-72-generic #81~16.04.1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. targetcli D 0 5971 1 0x00000080 Call Trace: __schedule+0x3d6/0x8b0 ? vprintk_func+0x44/0xe0 schedule+0x36/0x80 schedule_timeout+0x1db/0x370 ? __dynamic_pr_debug+0x8a/0xb0 wait_for_completion+0xb4/0x140 ? wake_up_q+0x70/0x70 iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod] iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod] iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod] lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod] configfs_write_file+0xb9/0x120 __vfs_write+0x1b/0x40 vfs_write+0xb8/0x1b0 SyS_write+0x5c/0xe0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com Reported-by: Matt Coleman <mcoleman@datto.com> Tested-by: Matt Coleman <mcoleman@datto.com> Tested-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-24scsi: target: remove boilerplate codeMaurizio Lombardi
[ Upstream commit e49a7d994379278d3353d7ffc7994672752fb0ad ] iscsit_free_session() is equivalent to iscsit_stop_session() followed by a call to iscsit_close_session(). Link: https://lore.kernel.org/r/20200313170656.9716-2-mlombard@redhat.com Tested-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-28scsi: Revert "target: iscsi: Wait for all commands to finish before freeing ↵Bart Van Assche
a session" commit 807b9515b7d044cf77df31f1af9d842a76ecd5cb upstream. Since commit e9d3009cb936 introduced a regression and since the fix for that regression was not perfect, revert this commit. Link: https://marc.info/?l=target-devel&m=158157054906195 Cc: Rahul Kundu <rahul.kundu@chelsio.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by: Dakshaja Uppalapati <dakshaja@chelsio.com> Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-28scsi: Revert "RDMA/isert: Fix a recently introduced regression related to ↵Bart Van Assche
logout" commit 76261ada16dcc3be610396a46d35acc3efbda682 upstream. Since commit 04060db41178 introduces soft lockups when toggling network interfaces, revert it. Link: https://marc.info/?l=target-devel&m=158157054906196 Cc: Rahul Kundu <rahul.kundu@chelsio.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by: Dakshaja Uppalapati <dakshaja@chelsio.com> Fixes: 04060db41178 ("scsi: RDMA/isert: Fix a recently introduced regression related to logout") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29scsi: RDMA/isert: Fix a recently introduced regression related to logoutBart Van Assche
commit 04060db41178c7c244f2c7dcd913e7fd331de915 upstream. iscsit_close_connection() calls isert_wait_conn(). Due to commit e9d3009cb936 both functions call target_wait_for_sess_cmds() although that last function should be called only once. Fix this by removing the target_wait_for_sess_cmds() call from isert_wait_conn() and by only calling isert_wait_conn() after target_wait_for_sess_cmds(). Fixes: e9d3009cb936 ("scsi: target: iscsi: Wait for all commands to finish before freeing a session"). Link: https://lore.kernel.org/r/20200116044737.19507-1-bvanassche@acm.org Reported-by: Rahul Kundu <rahul.kundu@chelsio.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-27scsi: target/core: Fix a race condition in the LUN lookup codeBart Van Assche
[ Upstream commit 63f7479439c95bcd49b7dd4af809862c316c71a3 ] The rcu_dereference(deve->se_lun) expression occurs twice in the LUN lookup functions. Since these expressions are not serialized against deve->se_lun assignments each of these expressions may yield a different result. Avoid that the wrong LUN pointer is stored in se_cmd by reading deve->se_lun only once. Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Fixes: 29a05deebf6c ("target: Convert se_node_acl->device_list[] to RCU hlist") # v4.10 Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23scsi: target: core: Fix a pr_debug() argumentBart Van Assche
commit c941e0d172605731de9b4628bd4146d35cf2e7d6 upstream. Print the string for which conversion failed instead of printing the function name twice. Fixes: 2650d71e244f ("target: move transport ID handling to the core") Cc: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20191107215525.64415-1-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04scsi: target: iscsi: Wait for all commands to finish before freeing a sessionBart Van Assche
[ Upstream commit e9d3009cb936bd0faf0719f68d98ad8afb1e613b ] The iSCSI target driver is the only target driver that does not wait for ongoing commands to finish before freeing a session. Make the iSCSI target driver wait for ongoing commands to finish before freeing a session. This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710 Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247 CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: target_completion target_complete_ok_work [target_core_mod] Call Trace: dump_stack+0x8a/0xd6 print_address_description.constprop.0+0x40/0x60 __kasan_report.cold+0x1b/0x33 kasan_report+0x16/0x20 __asan_load8+0x58/0x90 __lock_acquire+0xb1a/0x2710 lock_acquire+0xd3/0x200 _raw_spin_lock_irqsave+0x43/0x60 target_release_cmd_kref+0x162/0x7f0 [target_core_mod] target_put_sess_cmd+0x2e/0x40 [target_core_mod] lio_check_stop_free+0x12/0x20 [iscsi_target_mod] transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod] target_complete_ok_work+0x1b0/0x790 [target_core_mod] process_one_work+0x549/0xa40 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Allocated by task 889: save_stack+0x23/0x90 __kasan_kmalloc.constprop.0+0xcf/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xf6/0x360 transport_alloc_session+0x29/0x80 [target_core_mod] iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Freed by task 1025: save_stack+0x23/0x90 __kasan_slab_free+0x13a/0x190 kasan_slab_free+0x12/0x20 kmem_cache_free+0x146/0x400 transport_free_session+0x179/0x2f0 [target_core_mod] transport_deregister_session+0x130/0x180 [target_core_mod] iscsit_close_session+0x12c/0x350 [iscsi_target_mod] iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod] iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod] iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 The buggy address belongs to the object at ffff8881154ec9c0 which belongs to the cache se_sess_cache of size 352 The buggy address is located 176 bytes inside of 352-byte region [ffff8881154ec9c0, ffff8881154ecb20) The buggy address belongs to the page: page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0 flags: 0x2fff000000010200(slab|head) raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400 raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc Cc: Mike Christie <mchristi@redhat.com> Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.org Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04scsi: target: compare full CHAP_A Algorithm stringsDavid Disseldorp
[ Upstream commit 9cef2a7955f2754257a7cddedec16edae7b587d0 ] RFC 2307 states: For CHAP [RFC1994], in the first step, the initiator MUST send: CHAP_A=<A1,A2...> Where A1,A2... are proposed algorithms, in order of preference. ... For the Algorithm, as stated in [RFC1994], one value is required to be implemented: 5 (CHAP with MD5) LIO currently checks for this value by only comparing a single byte in the tokenized Algorithm string, which means that any value starting with a '5' (e.g. "55") is interpreted as "CHAP with MD5". Fix this by comparing the entire tokenized string. Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: David Disseldorp <ddiss@suse.de> Link: https://lore.kernel.org/r/20190912095547.22427-2-ddiss@suse.de Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-10scsi: target: core: Do not overwrite CDB byte 1Bodo Stroesser
[ Upstream commit 27e84243cb63601a10e366afe3e2d05bb03c1cb5 ] passthrough_parse_cdb() - used by TCMU and PSCSI - attepts to reset the LUN field of SCSI-2 CDBs (bits 5,6,7 of byte 1). The current code is wrong as for newer commands not having the LUN field it overwrites relevant command bits (e.g. for SECURITY PROTOCOL IN / OUT). We think this code was unnecessary from the beginning or at least it is no longer useful. So we remove it entirely. Link: https://lore.kernel.org/r/12498eab-76fd-eaad-1316-c2827badb76a@ts.fujitsu.com Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-06scsi: target: cxgbit: Fix cxgbit_fw4_ack()Bart Van Assche
commit fc5b220b2dcf8b512d9bd46fd17f82257e49bf89 upstream. Use the pointer 'p' after having tested that pointer instead of before. Fixes: 5cadafb236df ("target/cxgbit: Fix endianness annotations") Cc: Varun Prakash <varun@chelsio.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191023202150.22173-1-bvanassche@acm.org Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supportedMaurizio Lombardi
[ Upstream commit 5dd6c49339126c2c8df2179041373222362d6e49 ] If the CHAP_A value is not supported, the chap_server_open() function should free the auth_protocol pointer and set it to NULL, or we will leave a dangling pointer around. [ 66.010905] Unsupported CHAP_A value [ 66.011660] Security negotiation failed. [ 66.012443] iSCSI Login negotiation failed. [ 68.413924] general protection fault: 0000 [#1] SMP PTI [ 68.414962] CPU: 0 PID: 1562 Comm: targetcli Kdump: loaded Not tainted 4.18.0-80.el8.x86_64 #1 [ 68.416589] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 68.417677] RIP: 0010:__kmalloc_track_caller+0xc2/0x210 Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-23scsi: target/iscsi: Avoid iscsit_release_commands_from_conn() deadlockBart Van Assche
commit 32e36bfbcf31452a854263e7c7f32fbefc4b44d8 upstream. When using SCSI passthrough in combination with the iSCSI target driver then cmd->t_state_lock may be obtained from interrupt context. Hence, all code that obtains cmd->t_state_lock from thread context must disable interrupts first. This patch avoids that lockdep reports the following: WARNING: inconsistent lock state 4.18.0-dbg+ #1 Not tainted -------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. iscsi_ttx/1800 [HC1[1]:SC0[2]:HE0:SE0] takes: 000000006e7b0ceb (&(&cmd->t_state_lock)->rlock){?...}, at: target_complete_cmd+0x47/0x2c0 [target_core_mod] {HARDIRQ-ON-W} state was registered at: lock_acquire+0xd2/0x260 _raw_spin_lock+0x32/0x50 iscsit_close_connection+0x97e/0x1020 [iscsi_target_mod] iscsit_take_action_for_connection_exit+0x108/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x180/0x190 [iscsi_target_mod] kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 irq event stamp: 1281 hardirqs last enabled at (1279): [<ffffffff970ade79>] __local_bh_enable_ip+0xa9/0x160 hardirqs last disabled at (1281): [<ffffffff97a008a5>] interrupt_entry+0xb5/0xd0 softirqs last enabled at (1278): [<ffffffff977cd9a1>] lock_sock_nested+0x51/0xc0 softirqs last disabled at (1280): [<ffffffffc07a6e04>] ip6_finish_output2+0x124/0xe40 [ipv6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cmd->t_state_lock)->rlock); <Interrupt> lock(&(&cmd->t_state_lock)->rlock);
2019-01-26scsi: target: use consistent left-aligned ASCII INQUIRY dataDavid Disseldorp
[ Upstream commit 0de263577de5d5e052be5f4f93334e63cc8a7f0b ] spc5r17.pdf specifies: 4.3.1 ASCII data field requirements ASCII data fields shall contain only ASCII printable characters (i.e., code values 20h to 7Eh) and may be terminated with one or more ASCII null (00h) characters. ASCII data fields described as being left-aligned shall have any unused bytes at the end of the field (i.e., highest offset) and the unused bytes shall be filled with ASCII space characters (20h). LIO currently space-pads the T10 VENDOR IDENTIFICATION and PRODUCT IDENTIFICATION fields in the standard INQUIRY data. However, the PRODUCT REVISION LEVEL field in the standard INQUIRY data as well as the T10 VENDOR IDENTIFICATION field in the INQUIRY Device Identification VPD Page are zero-terminated/zero-padded. Fix this inconsistency by using space-padding for all of the above fields. Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-23scsi: target: iscsi: cxgbit: fix csk leakVarun Prakash
[ Upstream commit ed076c55b359cc9982ca8b065bcc01675f7365f6 ] In case of arp failure call cxgbit_put_csk() to free csk. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-23Revert "scsi: target: iscsi: cxgbit: fix csk leak"Sasha Levin
This reverts commit b831528038e3cad0d745c53bcaeedb642f5cbc1f. A wrong commit message was used for the stable commit because of a human error (and duplicate commit subject lines). This patch reverts this error, and the following patches add the two upstream commits. Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13scsi: target: iscsi: cxgbit: add missing spin_lock_init()Varun Prakash
[ Upstream commit 9e6371d3c6913ff1707fb2c0274c9925f7aaef80 ] Add missing spin_lock_init() for cdev->np_lock. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-13scsi: target: iscsi: cxgbit: fix csk leakVarun Prakash
[ Upstream commit 801df68d617e3cb831f531c99fa6003620e6b343 ] csk leak can happen if a new TCP connection gets established after cxgbit_accept_np() returns, to fix this leak free remaining csk in cxgbit_free_np(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-10-18scsi: iscsi: target: Don't use stack buffer for scatterlistLaura Abbott
[ Upstream commit 679fcae46c8b2352bba3485d521da070cfbe68e6 ] Fedora got a bug report of a crash with iSCSI: kernel BUG at include/linux/scatterlist.h:143! ... RIP: 0010:iscsit_do_crypto_hash_buf+0x154/0x180 [iscsi_target_mod] ... Call Trace: ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod] iscsit_get_rx_pdu+0x4cd/0xa90 [iscsi_target_mod] ? native_sched_clock+0x3e/0xa0 ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod] iscsi_target_rx_thread+0x81/0xf0 [iscsi_target_mod] kthread+0x120/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 This is a BUG_ON for using a stack buffer with a scatterlist. There are two cases that trigger this bug. Switch to using a dynamically allocated buffer for one case and do not assign a NULL buffer in another case. Signed-off-by: Laura Abbott <labbott@redhat.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values ↵Vincent Pelletier
fails [ Upstream commit 7915919bb94e12460c58e27c708472e6f85f6699 ] Fixes a use-after-free reported by KASAN when later iscsi_target_login_sess_out gets called and it tries to access conn->sess->se_sess: Disabling lock debugging due to kernel taint iSCSI Login timeout on Network Portal [::]:3260 iSCSI Login negotiation failed. ================================================================== BUG: KASAN: use-after-free in iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] Read of size 8 at addr ffff880109d070c8 by task iscsi_np/980 CPU: 1 PID: 980 Comm: iscsi_np Tainted: G O 4.17.8kasan.sess.connops+ #4 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd iscsi_target_login_sess_out.cold.12+0x58/0xff [iscsi_target_mod] iscsi_target_login_thread+0x1086/0x1710 [iscsi_target_mod] ? __sched_text_start+0x8/0x8 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] ? __kthread_parkme+0xcc/0x100 ? parse_args.cold.14+0xd3/0xd3 ? iscsi_target_login_sess_out+0x250/0x250 [iscsi_target_mod] kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 Allocated by task 980: kasan_kmalloc+0xbf/0xe0 kmem_cache_alloc_trace+0x112/0x210 iscsi_target_login_thread+0x816/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 Freed by task 980: __kasan_slab_free+0x125/0x170 kfree+0x90/0x1d0 iscsi_target_login_thread+0x1577/0x1710 [iscsi_target_mod] kthread+0x1a0/0x1c0 ret_from_fork+0x35/0x40 The buggy address belongs to the object at ffff880109d06f00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 456 bytes inside of 512-byte region [ffff880109d06f00, ffff880109d07100) The buggy address belongs to the page: page:ffffea0004274180 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 flags: 0x17fffc000008100(slab|head) raw: 017fffc000008100 0000000000000000 0000000000000000 00000001000c000c raw: dead000000000100 dead000000000200 ffff88011b002e00 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880109d06f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880109d07000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880109d07080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880109d07100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880109d07180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> [rebased against idr/ida changes and to handle ret review comments from Matthew] Signed-off-by: Mike Christie <mchristi@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Reviewed-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-03scsi: target: Avoid that EXTENDED COPY commands trigger lock inversionBart Van Assche
[ Upstream commit 36d4cb460bcbe2a1323732a6e4bb9dd783284368 ] The approach for adding a device to the devices_idr data structure and for removing it is as follows: * &dev->dev_group.cg_item is initialized before a device is added to devices_idr. * If the reference count of a device drops to zero then target_free_device() removes the device from devices_idr. * All devices_idr manipulations are protected by device_mutex. This means that increasing the reference count of a device is sufficient to prevent removal from devices_idr and also that it is safe access dev_group.cg_item for any device that is referenced by devices_idr. Use this to modify target_find_device() and target_for_each_device() such that these functions no longer introduce a dependency between device_mutex and the configfs root inode mutex. Note: it is safe to pass a NULL pointer to config_item_put() and also to config_item_get_unless_zero(). This patch prevents that lockdep reports the following complaint: ====================================================== WARNING: possible circular locking dependency detected 4.12.0-rc1-dbg+ #1 Not tainted ------------------------------------------------------ rmdir/12053 is trying to acquire lock: (device_mutex#2){+.+.+.}, at: [<ffffffffa010afce>] target_free_device+0xae/0xf0 [target_core_mod] but task is already holding lock: (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>] vfs_rmdir+0x50/0x140 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sb->s_type->i_mutex_key#14){++++++}: lock_acquire+0x59/0x80 down_write+0x36/0x70 configfs_depend_item+0x3a/0xb0 [configfs] target_depend_item+0x13/0x20 [target_core_mod] target_xcopy_locate_se_dev_e4_iter+0x87/0x100 [target_core_mod] target_devices_idr_iter+0x16/0x20 [target_core_mod] idr_for_each+0x39/0xc0 target_for_each_device+0x36/0x50 [target_core_mod] target_xcopy_locate_se_dev_e4+0x28/0x80 [target_core_mod] target_xcopy_do_work+0x2e9/0xdd0 [target_core_mod] process_one_work+0x1ca/0x3f0 worker_thread+0x49/0x3b0 kthread+0x109/0x140 ret_from_fork+0x31/0x40 -> #0 (device_mutex#2){+.+.+.}: __lock_acquire+0x101f/0x11d0 lock_acquire+0x59/0x80 __mutex_lock+0x7e/0x950 mutex_lock_nested+0x16/0x20 target_free_device+0xae/0xf0 [target_core_mod] target_core_dev_release+0x10/0x20 [target_core_mod] config_item_put+0x6e/0xb0 [configfs] configfs_rmdir+0x1a6/0x300 [configfs] vfs_rmdir+0xb7/0x140 do_rmdir+0x1f4/0x200 SyS_rmdir+0x11/0x20 entry_SYSCALL_64_fastpath+0x23/0xc2 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sb->s_type->i_mutex_key#14); lock(device_mutex#2); lock(&sb->s_type->i_mutex_key#14); lock(device_mutex#2); *** DEADLOCK *** 3 locks held by rmdir/12053: #0: (sb_writers#10){.+.+.+}, at: [<ffffffff811e223f>] mnt_want_write+0x1f/0x50 #1: (&sb->s_type->i_mutex_key#14/1){+.+.+.}, at: [<ffffffff811cb97e>] do_rmdir+0x15e/0x200 #2: (&sb->s_type->i_mutex_key#14){++++++}, at: [<ffffffff811c5c30>] vfs_rmdir+0x50/0x140 stack backtrace: CPU: 3 PID: 12053 Comm: rmdir Not tainted 4.12.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0x86/0xcf print_circular_bug+0x1c7/0x220 __lock_acquire+0x101f/0x11d0 lock_acquire+0x59/0x80 __mutex_lock+0x7e/0x950 mutex_lock_nested+0x16/0x20 target_free_device+0xae/0xf0 [target_core_mod] target_core_dev_release+0x10/0x20 [target_core_mod] config_item_put+0x6e/0xb0 [configfs] configfs_rmdir+0x1a6/0x300 [configfs] vfs_rmdir+0xb7/0x140 do_rmdir+0x1f4/0x200 SyS_rmdir+0x11/0x20 entry_SYSCALL_64_fastpath+0x23/0xc2 Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> [Rebased to handle conflict withe target_find_device removal] Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-03scsi: target/iscsi: Make iscsit_ta_authentication() respect the output ↵Bart Van Assche
buffer size [ Upstream commit 35bea5c84fd13c643cce63f0b5cd4b148f8c901d ] Fixes: e48354ce078c ("iscsi-target: Add iSCSI fabric support for target v4.1") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29scsi: target: iscsi: Use bin2hex instead of a re-implementationVincent Pelletier
commit 8c39e2699f8acb2e29782a834e56306da24937fe upstream. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29scsi: target: iscsi: Use hex2bin instead of a re-implementationVincent Pelletier
commit 1816494330a83f2a064499d8ed2797045641f92c upstream. This change has the following effects, in order of descreasing importance: 1) Prevent a stack buffer overflow 2) Do not append an unnecessary NULL to an anyway binary buffer, which is writing one byte past client_digest when caller is: chap_string_to_hex(client_digest, chap_r, strlen(chap_r)); The latter was found by KASAN (see below) when input value hes expected size (32 hex chars), and further analysis revealed a stack buffer overflow can happen when network-received value is longer, allowing an unauthenticated remote attacker to smash up to 17 bytes after destination buffer (16 bytes attacker-controlled and one null). As switching to hex2bin requires specifying destination buffer length, and does not internally append any null, it solves both issues. This addresses CVE-2018-14633. Beyond this: - Validate received value length and check hex2bin accepted the input, to log this rejection reason instead of just failing authentication. - Only log received CHAP_R and CHAP_C values once they passed sanity checks. ================================================================== BUG: KASAN: stack-out-of-bounds in chap_string_to_hex+0x32/0x60 [iscsi_target_mod] Write of size 1 at addr ffff8801090ef7c8 by task kworker/0:0/1021 CPU: 0 PID: 1021 Comm: kworker/0:0 Tainted: G O 4.17.8kasan.sess.connops+ #2 Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 05/19/2014 Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod] Call Trace: dump_stack+0x71/0xac print_address_description+0x65/0x22e ? chap_string_to_hex+0x32/0x60 [iscsi_target_mod] kasan_report.cold.6+0x241/0x2fd chap_string_to_hex+0x32/0x60 [iscsi_target_mod] chap_server_compute_md5.isra.2+0x2cb/0x860 [iscsi_target_mod] ? chap_binaryhex_to_asciihex.constprop.5+0x50/0x50 [iscsi_target_mod] ? ftrace_caller_op_ptr+0xe/0xe ? __orc_find+0x6f/0xc0 ? unwind_next_frame+0x231/0x850 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? ret_from_fork+0x35/0x40 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? deref_stack_reg+0xd0/0xd0 ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? is_module_text_address+0xa/0x11 ? kernel_text_address+0x4c/0x110 ? __save_stack_trace+0x82/0x100 ? ret_from_fork+0x35/0x40 ? save_stack+0x8c/0xb0 ? 0xffffffffc1660000 ? iscsi_target_do_login+0x155/0x8d0 [iscsi_target_mod] ? iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? process_one_work+0x35c/0x640 ? worker_thread+0x66/0x5d0 ? kthread+0x1a0/0x1c0 ? ret_from_fork+0x35/0x40 ? iscsi_update_param_value+0x80/0x80 [iscsi_target_mod] ? iscsit_release_cmd+0x170/0x170 [iscsi_target_mod] chap_main_loop+0x172/0x570 [iscsi_target_mod] ? chap_server_compute_md5.isra.2+0x860/0x860 [iscsi_target_mod] ? rx_data+0xd6/0x120 [iscsi_target_mod] ? iscsit_print_session_params+0xd0/0xd0 [iscsi_target_mod] ? cyc2ns_read_begin.part.2+0x90/0x90 ? _raw_spin_lock_irqsave+0x25/0x50 ? memcmp+0x45/0x70 iscsi_target_do_login+0x875/0x8d0 [iscsi_target_mod] ? iscsi_target_check_first_request.isra.5+0x1a0/0x1a0 [iscsi_target_mod] ? del_timer+0xe0/0xe0 ? memset+0x1f/0x40 ? flush_sigqueue+0x29/0xd0 iscsi_target_do_login_rx+0x3bc/0x4c0 [iscsi_target_mod] ? iscsi_target_nego_release+0x80/0x80 [iscsi_target_mod] ? iscsi_target_restore_sock_callbacks+0x130/0x130 [iscsi_target_mod] process_one_work+0x35c/0x640 worker_thread+0x66/0x5d0 ? flush_rcu_work+0x40/0x40 kthread+0x1a0/0x1c0 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40 The buggy address belongs to the page: page:ffffea0004243bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x17fffc000000000() raw: 017fffc000000000 0000000000000000 0000000000000000 00000000ffffffff raw: ffffea0004243c20 ffffea0004243ba0 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801090ef680: f2 f2 f2 f2 f2 f2 f2 01 f2 f2 f2 f2 f2 f2 f2 00 ffff8801090ef700: f2 f2 f2 f2 f2 f2 f2 00 02 f2 f2 f2 f2 f2 f2 00 >ffff8801090ef780: 00 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2 f2 00 ^ ffff8801090ef800: 00 f2 f2 f2 f2 f2 f2 00 00 00 00 02 f2 f2 f2 f2 ffff8801090ef880: f2 f2 f2 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 ================================================================== Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19scsi: target: fix __transport_register_session lockingMike Christie
[ Upstream commit 6a64f6e1591322beb8ce16e952a53582caf2a15c ] When __transport_register_session is called from transport_register_session irqs will already have been disabled, so we do not want the unlock irq call to enable them until the higher level has done the final spin_unlock_irqrestore/ spin_unlock_irq. This has __transport_register_session use the save/restore call. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05iscsi target: fix session creation failure handlingMike Christie
commit 26abc916a898d34c5ad159315a2f683def3c5555 upstream. The problem is that iscsi_login_zero_tsih_s1 sets conn->sess early in iscsi_login_set_conn_values. If the function fails later like when we alloc the idr it does kfree(sess) and leaves the conn->sess pointer set. iscsi_login_zero_tsih_s1 then returns -Exyz and we then call iscsi_target_login_sess_out and access the freed memory. This patch has iscsi_login_zero_tsih_s1 either completely setup the session or completely tear it down, so later in iscsi_target_login_sess_out we can just check for it being set to the connection. Cc: stable@vger.kernel.org Fixes: 0957627a9960 ("iscsi-target: Fix sess allocation leak in...") Signed-off-by: Mike Christie <mchristi@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05scsi: target: iscsi: cxgbit: fix max iso npdu calculationVarun Prakash
[ Upstream commit 1b350ea0c2f4df9aa30426614c8eb755a8c32814 ] - rounddown CXGBIT_MAX_ISO_PAYLOAD by csk->emss before calculating max_iso_npdu to get max TCP payload in multiple of mss. - call cxgbit_set_digest() before cxgbit_set_iso_npdu() to set csk->submode, it is used in calculating number of iso pdus. Signed-off-by: Varun Prakash <varun@chelsio.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11scsi: target: Fix truncated PR-in ReadKeys responseDavid Disseldorp
commit 63ce3c384db26494615e3c8972bcd419ed71f4c4 upstream. SPC5r17 states that the contents of the ADDITIONAL LENGTH field are not altered based on the allocation length, so always calculate and pack the full key list length even if the list itself is truncated. According to Maged: Yes it fixes the "Storage Spaces Persistent Reservation" test in the Windows 2016 Server Failover Cluster validation suites when having many connections that result in more than 8 registrations. I tested your patch on 4.17 with iblock. This behaviour can be tested using the libiscsi PrinReadKeys.Truncate test. Cc: stable@vger.kernel.org Signed-off-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Tested-by: Maged Mokhtar <mmokhtar@petasan.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-21scsi: target: fix crash with iscsi target and dvdMing Lei
[ Upstream commit 8e1ceafe50ec4d1bcfae154dd70e7cb6946a6177 ] When the current page can't be added to bio, one new bio should be created for adding this page again, instead of ignoring this page. This patch fixes kernel crash with iscsi target and dvd, as reported by Wakko. Cc: Wakko Warner <wakko@animx.eu.org> Cc: Bart Van Assche <Bart.VanAssche@wdc.com> Cc: target-devel@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Christoph Hellwig <hch@lst.de> Fixes: 84c8590646d5b35804 ("target: avoid accessing .bi_vcnt directly") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-09scsi: target: Fix fortify_panic kernel exceptionBryant G Ly
commit f5957dade4f373b04fa1f5315a489f18cc2c4cb4 upstream. memcmp() requires the two buffers passed as arguments to be at least 'size' bytes long, otherwise a fortify_panic will trigger. Use memchr_inv() instead of memcmp() to determine whether the received payload is zeroed or not. The bug was found by running a block backstore via LIO. [ 496.212958] Call Trace: [ 496.212960] [c0000007e58e3800] [c000000000cbbefc] fortify_panic+0x24/0x38 (unreliable) [ 496.212965] [c0000007e58e3860] [d00000000f150c28] iblock_execute_write_same+0x3b8/0x3c0 [target_core_iblock] [ 496.212976] [c0000007e58e3910] [d000000006c737d4] __target_execute_cmd+0x54/0x150 [target_core_mod] [ 496.212982] [c0000007e58e3940] [d000000006d32ce4] ibmvscsis_write_pending+0x74/0xe0 [ibmvscsis] [ 496.212991] [c0000007e58e39b0] [d000000006c74fc8] transport_generic_new_cmd+0x318/0x370 [target_core_mod] [ 496.213001] [c0000007e58e3a30] [d000000006c75084] transport_handle_cdb_direct+0x64/0xd0 [target_core_mod] [ 496.213011] [c0000007e58e3aa0] [d000000006c75298] target_submit_cmd_map_sgls+0x1a8/0x320 [target_core_mod] [ 496.213021] [c0000007e58e3b30] [d000000006c75458] target_submit_cmd+0x48/0x60 [target_core_mod] [ 496.213026] [c0000007e58e3bd0] [d000000006d34c20] ibmvscsis_scheduler+0x370/0x600 [ibmvscsis] [ 496.213031] [c0000007e58e3c90] [c00000000013135c] process_one_work+0x1ec/0x580 [ 496.213035] [c0000007e58e3d20] [c000000000131798] worker_thread+0xa8/0x600 [ 496.213039] [c0000007e58e3dc0] [c00000000013a468] kthread+0x168/0x1b0 [ 496.213044] [c0000007e58e3e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4 [mkp: tweaked commit message] Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Signed-off-by: Bryant G. Ly <bryantly@linux.vnet.ibm.com> Reviewed-by: Steven Royer <seroyer@linux.vnet.ibm.com> Tested-by: Taylor Jakobson <tjakobs@us.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Cc: <stable@vger.kernel.org> # v4.13+ Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-12tcmu: release blocks for partially setup cmdsMike Christie
[ Upstream commit 810b8153c4243d2012a6ec002ddd3bbc9a9ae8c2 ] If we cannot setup a cmd because we run out of ring space or global pages release the blocks before sleeping. This prevents a deadlock where dev0 has waiting_blocks set and needs N blocks, but dev1 to devX have each allocated N / X blocks and also hit the global block limit so they went to sleep. find_free_blocks is not able to take the sleeping dev's blocks becaause their waiting_blocks is set and even if it was not the block returned by find_last_bit could equal dbi_max. The latter will probably never happen because DATA_BLOCK_BITS is so high but in the next patches DATA_BLOCK_BITS and TCMU_GLOBAL_MAX_BLOCKS will be settable so it might be lower and could happen. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22iscsi-target: make sure to wake up sleeping login workerFlorian Westphal
commit 1c130ae00b769a2e2df41bad3d6051ee8234b636 upstream. Mike Christie reports: Starting in 4.14 iscsi logins will fail around 50% of the time. Problem appears to be that iscsi_target_sk_data_ready() callback may return without doing anything in case it finds the login work queue is still blocked in sock_recvmsg(). Nicholas Bellinger says: It would indicate users providing their own ->sk_data_ready() callback must be responsible for waking up a kthread context blocked on sock_recvmsg(..., MSG_WAITALL), when a second ->sk_data_ready() is received before the first sock_recvmsg(..., MSG_WAITALL) completes. So, do this and invoke the original data_ready() callback -- in case of tcp sockets this takes care of waking the thread. Disclaimer: I do not understand why this problem did not show up before tcp prequeue removal. (Drop WARN_ON usage - nab) Reported-by: Mike Christie <mchristi@redhat.com> Bisected-by: Mike Christie <mchristi@redhat.com> Tested-by: Mike Christie <mchristi@redhat.com> Diagnosed-by: Nicholas Bellinger <nab@linux-iscsi.org> Fixes: e7942d0633c4 ("tcp: remove prequeue support") Signed-off-by: Florian Westphal <fw@strlen.de> Cc: stable@vger.kernel.org # 4.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22target/iscsi: avoid NULL dereference in CHAP auth error pathDavid Disseldorp
commit ce512d79d0466a604793addb6b769d12ee326822 upstream. If chap_server_compute_md5() fails early, e.g. via CHAP_N mismatch, then crypto_free_shash() is called with a NULL pointer which gets dereferenced in crypto_shash_tfm(). Fixes: 69110e3cedbb ("iscsi-target: Use shash and ahash") Suggested-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David Disseldorp <ddiss@suse.de> Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-02block: fix blk_rq_append_bioJens Axboe
commit 0abc2a10389f0c9070f76ca906c7382788036b93 upstream. Commit caa4b02476e3(blk-map: call blk_queue_bounce from blk_rq_append_bio) moves blk_queue_bounce() into blk_rq_append_bio(), but don't consider the fact that the bounced bio becomes invisible to caller since the parameter type is 'struct bio *'. Make it a pointer to a pointer to a bio, so the caller sees the right bio also after a bounce. Fixes: caa4b02476e3 ("blk-map: call blk_queue_bounce from blk_rq_append_bio") Cc: Christoph Hellwig <hch@lst.de> Reported-by: Michele Ballabio <barra_cuda@katamail.com> (handling failure of blk_rq_append_bio(), only call bio_get() after blk_rq_append_bio() returns OK) Tested-by: Michele Ballabio <barra_cuda@katamail.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20target/file: Do not return error for UNMAP if length is zeroJiang Yi
[ Upstream commit 594e25e73440863981032d76c9b1e33409ceff6e ] The function fd_execute_unmap() in target_core_file.c calles ret = file->f_op->fallocate(file, mode, pos, len); Some filesystems implement fallocate() to return error if length is zero (e.g. btrfs) but according to SCSI Block Commands spec UNMAP should return success for zero length. Signed-off-by: Jiang Yi <jiangyilism@gmail.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20target:fix condition return in core_pr_dump_initiator_port()tangwenji
[ Upstream commit 24528f089d0a444070aa4f715ace537e8d6bf168 ] When is pr_reg->isid_present_at_reg is false,this function should return. This fixes a regression originally introduced by: commit d2843c173ee53cf4c12e7dfedc069a5bc76f0ac5 Author: Andy Grover <agrover@redhat.com> Date: Thu May 16 10:40:55 2013 -0700 target: Alter core_pr_dump_initiator_port for ease of use Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20iscsi-target: fix memory leak in lio_target_tiqn_addtpg()tangwenji
[ Upstream commit 12d5a43b2dffb6cd28062b4e19024f7982393288 ] tpg must free when call core_tpg_register() return fail Signed-off-by: tangwenji <tang.wenji@zte.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-06-30 10:06:17 +0000