summaryrefslogtreecommitdiff
path: root/drivers/thermal/ti-soc-thermal
AgeCommit message (Collapse)Author
2023-09-11thermal: Constify the trip argument of the .get_trend() zone callbackRafael J. Wysocki
Add 'const' to the definition of the 'trip' argument of the .get_trend() thermal zone callback to indicate that the trip point passed to it should not be modified by it and adjust the callback functions implementing it, thermal_get_trend() in the ACPI thermal driver and __ti_thermal_get_trend(), accordingly. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>
2023-08-29thermal: core: Rework .get_trend() thermal zone callbackRafael J. Wysocki
Passing a struct thermal_trip pointer instead of a trip index to the .get_trend() thermal zone callback allows one of its 2 implementations, the thermal_get_trend() function in the ACPI thermal driver, to be simplified quite a bit, and the other implementation of it in the ti-soc-thermal driver does not even use the relevant callback argument. For this reason, change the .get_trend() thermal zone callback definition and adjust the related code accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-17thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()Li Zetao
Use IS_ERR_OR_NULL() to detect an error pointer or a null pointer open-coding to simplify the code. Signed-off-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230817014900.3094512-1-lizetao1@huawei.com
2023-06-26thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()Yangtao Li
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly print error information. Signed-off-by: Yangtao Li <frank.li@vivo.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230620090732.50025-8-frank.li@vivo.com
2023-04-03Merge tag 'thermal-v6.4-rc1-1' of ↵Rafael J. Wysocki
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal control material for 6.4-rc1 from Daniel Lezcano: "- Add more thermal zone device encapsulation: prevent setting structure field directly, access the sensor device instead the thermal zone's device for trace, relocate the traces in drivers/thermal (Daniel Lezcano) - Use the generic trip point for the i.MX and remove the get_trip_temp ops (Daniel Lezcano) - Use the devm_platform_ioremap_resource() in the Hisilicon driver (Yang Li) - Remove R-Car H3 ES1.* handling as public has only access to the ES2 version and the upstream support for the ES1 has been shutdown (Wolfram Sang) - Add a delay after initializing the bank in order to let the time to the hardware to initialze itself before reading the temperature (Amjad Ouled-Ameur) - Add MT8365 support (Amjad Ouled-Ameur)" * tag 'thermal-v6.4-rc1-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/drivers/ti: Use fixed update interval thermal/drivers/stm: Don't set no_hwmon to false thermal/drivers/db8500: Use driver dev instead of tz->device thermal/core: Relocate the traces definition in thermal directory thermal/drivers/hisi: Use devm_platform_ioremap_resource() thermal/drivers/imx: Use the thermal framework for the trip point thermal/drivers/imx: Remove get_trip_temp ops thermal/drivers/rcar_gen3_thermal: Remove R-Car H3 ES1.* handling thermal/drivers/mediatek: Add delay after thermal banks initialization thermal/drivers/mediatek: Add support for MT8365 SoC thermal/drivers/mediatek: Control buffer enablement tweaks dt-bindings: thermal: mediatek: Add binding documentation for MT8365 SoC
2023-04-01thermal/drivers/ti: Use fixed update intervalDaniel Lezcano
Currently the TI thermal driver sets the sensor update interval based on the polling of the thermal zone. In order to get the polling rate, the code inspects the thermal zone device structure internals, thus breaking the self-encapsulation of the thermal framework core framework. On the other side, we see the common polling rates set in the device tree for the platforms using this driver are 500 or 1000 ms. Setting the polling rate to 250 ms would be far enough to cover the combination we found in the device tree. Instead of accessing the thermal zone device structure polling rate, let's use a common update interval of 250 ms for the driver. Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Dhruva Gole <d-gole@ti.com> Acked-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/20230307133735.90772-7-daniel.lezcano@linaro.org
2023-03-30thermal: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03thermal: Use thermal_zone_device_type() accessorDaniel Lezcano
Replace the accesses to 'tz->type' by its accessor version in order to self-encapsulate the thermal_zone_device structure. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek LVTS Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03thermal: Don't use 'device' internal thermal zone structure fieldDaniel Lezcano
Some drivers are directly using the thermal zone's 'device' structure field. Use the driver device pointer instead of the thermal zone device when it is available. Remove the traces when they are duplicate with the traces in the core code. Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek LVTS Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek LVTS Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03thermal/hwmon: Use the right device for devm_thermal_add_hwmon_sysfs()Daniel Lezcano
The devres variant of thermal_add_hwmon_sysfs() only takes the thermal zone structure pointer as parameter. Actually, it uses the tz->device to add it in the devres list. It is preferable to use the device registering the thermal zone instead of the thermal zone device itself. That prevents the driver accessing the thermal zone structure internals and it is from my POV more correct regarding how devm_ is used. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #amlogic_thermal Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03thermal/core: Use the thermal zone 'devdata' accessor in thermal located driversDaniel Lezcano
The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062 Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> #spread Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-06thermal/drivers/ti: Remove unused macros ti_thermal_get_trip_value() / ↵Daniel Lezcano
ti_thermal_trip_is_valid() The macros: ti_thermal_get_trip_value() ti_thermal_trip_is_valid() are unused. Remove them. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20221003092602.1323944-26-daniel.lezcano@linaro.org
2022-12-14thermal: ti-soc-thermal: Drop comma after SoC match table sentinelGeert Uytterhoeven
It does not make sense to have a comma after a sentinel, as any new elements must be added before the sentinel. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Keerthy <j-keerthy@ti.com> Link: https://lore.kernel.org/r/1d6de2a80b919cb11199e56ac06ad21c273ebe57.1669045586.git.geert+renesas@glider.be Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2022-08-17thermal/drivers/ti-soc: Switch to new of APIDaniel Lezcano
The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Link: https://lore.kernel.org/r/20220804224349.1926752-25-daniel.lezcano@linexp.org Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-28thermal/ti-soc-thermal: Fix comment typoJason Wang
The double `and' is duplicated in line 229, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20220715051829.30927-1-wangborong@cdjrlc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-08thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()YueHaibing
commit b263b473bf62 ("thermal: ti-soc-thermal: Remove redundant code") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20220305125047.26948-1-yuehaibing@huawei.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-08drivers/thermal/ti-soc-thermal: Add hwmon supportRomain Naour
Expose ti-soc-thermal thermal sensors as HWMON devices. # sensors cpu_thermal-virtual-0 Adapter: Virtual device temp1: +54.2 C (crit = +105.0 C) dspeve_thermal-virtual-0 Adapter: Virtual device temp1: +51.4 C (crit = +105.0 C) gpu_thermal-virtual-0 Adapter: Virtual device temp1: +54.2 C (crit = +105.0 C) iva_thermal-virtual-0 Adapter: Virtual device temp1: +54.6 C (crit = +105.0 C) core_thermal-virtual-0 Adapter: Virtual device temp1: +52.6 C (crit = +105.0 C) Similar to imx_sc_thermal d2bc4dd91da6095a769fdc9bc519d3be7ad5f97a. No need to take care of thermal_remove_hwmon_sysfs() since devm_thermal_add_hwmon_sysfs() (a wrapper around devres) is used. See c7fc403e40b0ea18976a59e968c23439a80809e8. Signed-off-by: Romain Naour <romain.naour@smile.fr> Link: https://lore.kernel.org/r/20220218104725.2718904-1-romain.naour@smile.fr Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-05-24thermal/ti-soc-thermal: Fix kernel-docYang Li
Fix function name in ti-bandgap.c kernel-doc comment to remove a warning. drivers/thermal/ti-soc-thermal/ti-bandgap.c:787: warning: expecting prototype for ti_bandgap_alert_init(). Prototype was for ti_bandgap_talert_init() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1621851963-36548-1-git-send-email-yang.lee@linux.alibaba.com
2021-04-21thermal/drivers/ti-soc-thermal/bandgap Remove unused variable 'val'Lin Ruizhe
The function ti_bandgap_restore_ctxt() restores the context at resume time. It checks if the sensor has a counter, reads the register but does nothing with the value. The block was probably omitted by the commit b87ea759a4cc. Remove the unused variable as well as the block using it as we can consider it as dead code. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: b87ea759a4cc ("staging: omap-thermal: fix context restore function") Signed-off-by: Lin Ruizhe <linruizhe@huawei.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210421084256.57591-1-linruizhe@huawei.com
2021-04-20thermal/drivers/ti-soc-thermal/ti-bandgap: Rearrange all the included header ↵Zhen Lei
files alphabetically For the sake of lisibility, reorder the header files alphabetically. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406091912.2583-2-thunder.leizhen@huawei.com
2021-03-10thermal:ti-soc-thermal: Remove duplicate include in ti-bandgapZhang Yunkai
'of_device.h' included in 'ti-bandgap.c' is duplicated. It is also included in the 25th line. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210306123415.219441-1-zhang.yunkai@zte.com.cn
2021-02-15thermal: ti-soc-thermal: Use non-inverted define for omap4Tony Lindgren
When we set bit 10 high we use continuous mode and not single mode. Let's correct this to avoid confusion. No functional changes here, the code does the right thing with bit 10. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-5-tony@atomide.com
2021-02-15thermal: ti-soc-thermal: Simplify polling with iopollTony Lindgren
We can use iopoll for checking the EOCZ (end of conversion) bit. And with this we now also want to handle the timeout errors properly. For omap3, we need about 1.2ms for the single mode sampling to wait for EOCZ down, so let's use 1.5ms timeout there. Waiting for sampling to start is faster and we can use 1ms timeout. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-4-tony@atomide.com
2021-02-15thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430Tony Lindgren
At least for 4430, trying to use the single conversion mode eventually hangs the thermal sensor. This can be quite easily seen with errors: thermal thermal_zone0: failed to read out thermal zone (-5) Also, trying to read the temperature shows a stuck value with: $ while true; do cat /sys/class/thermal/thermal_zone0/temp; done Where the temperature is not rising at all with the busy loop. Additionally, the EOCZ (end of conversion) bit is not rising on 4430 in single conversion mode while it works fine in continuous conversion mode. It is also possible that the hung temperature sensor can affect the thermal shutdown alert too. Let's fix the issue by adding TI_BANDGAP_FEATURE_CONT_MODE_ONLY flag and use it for 4430. Note that we also need to add udelay to for the EOCZ (end of conversion) bit polling as otherwise we have it time out too early on 4430. We'll be changing the loop to use iopoll in the following clean-up patch. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-3-tony@atomide.com
2021-02-15thermal: ti-soc-thermal: Skip pointless register access for dra7Tony Lindgren
On dra7, there is no Start of Conversion (SOC) register bit and we have an empty bgap_soc_mask in the configuration for the thermal driver. Let's not do pointless reads and writes with the empty mask. There's also no point waiting for End of Conversion bit (EOCZ) to go high on dra7. We only care about it going down, and are now mostly timing out waiting for EOCZ high while it has already gone down. When we add checking for the timeout errors in a later patch, waiting for EOCZ high would cause bogus time out errors. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-2-tony@atomide.com
2021-01-19thermal/core: Remove ms based delay fieldsDaniel Lezcano
The code does no longer use the ms unit based fields to set the delays as they are replaced by the jiffies. Remove them and replace their user to use the jiffies version instead. Cc: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Peter Kästle <peter@piie.net> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201216220337.839878-3-daniel.lezcano@linaro.org
2020-11-12thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430Peter Ujfalusi
It has been observed that on OMAP4430 (ES2.0, ES2.1 and ES2.3) the enabled notifier causes errors on the DTEMP readout values: ti-soc-thermal 4a002260.bandgap: in range ADC val: 52 ti-soc-thermal 4a002260.bandgap: in range ADC val: 64 ti-soc-thermal 4a002260.bandgap: in range ADC val: 64 ti-soc-thermal 4a002260.bandgap: out of range ADC val: 0 thermal thermal_zone0: failed to read out thermal zone (-5) ti-soc-thermal 4a002260.bandgap: out of range ADC val: 0 thermal thermal_zone0: failed to read out thermal zone (-5) ti-soc-thermal 4a002260.bandgap: out of range ADC val: 4 thermal thermal_zone0: failed to read out thermal zone (-5) ti-soc-thermal 4a002260.bandgap: in range ADC val: 100 raw 100 translates to 133 Celsius on omap4-sdp, triggering shutdown due to critical temperature. When the notifier is disable for OMAP4430 the DTEMP values are stable: ti-soc-thermal 4a002260.bandgap: in range ADC val: 56 ti-soc-thermal 4a002260.bandgap: in range ADC val: 56 ti-soc-thermal 4a002260.bandgap: in range ADC val: 57 ti-soc-thermal 4a002260.bandgap: in range ADC val: 57 ti-soc-thermal 4a002260.bandgap: in range ADC val: 56 Fixes: 5093402e5b44 ("thermal: ti-soc-thermal: Enable addition power management") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029100335.27665-1-peter.ujfalusi@ti.com
2020-10-12thermal: ti-soc-thermal: Enable addition power managementAdam Ford
The bandgap sensor can be idled when the processor is too, but it isn't currently being done, so the power consumption of OMAP3 boards can elevated if the bangap sensor is enabled. This patch attempts to use some additional power management to idle the clock to the bandgap when not needed. Signed-off-by: Adam Ford <aford173@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Andreas Kemnade <andreas@kemnade.info> # GTA04 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200911123157.759379-1-aford173@gmail.com
2020-09-04thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430Tony Lindgren
We can sometimes get bogus thermal shutdowns on omap4430 at least with droid4 running idle with a battery charger connected: thermal thermal_zone0: critical temperature reached (143 C), shutting down Dumping out the register values shows we can occasionally get a 0x7f value that is outside the TRM listed values in the ADC conversion table. And then we get a normal value when reading again after that. Reading the register multiple times does not seem help avoiding the bogus values as they stay until the next sample is ready. Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we should have values from 13 to 107 listed with a total of 95 values. But looking at the omap4430_adc_to_temp array, the values are off, and the end values are missing. And it seems that the 4430 ADC table is similar to omap3630 rather than omap4460. Let's fix the issue by using values based on the omap3630 table and just ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has the missing values added while the TRM table only shows every second value. Note that sometimes the ADC register values within the valid table can also be way off for about 1 out of 10 values. But it seems that those just show about 25 C too low values rather than too high values. So those do not cause a bogus thermal shutdown. Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
2020-07-21thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()Dan Carpenter
This condition is reversed and will cause breakage. Fixes: 7440f518dad9 ("thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200616091949.GA11940@mwanda
2020-04-29thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTRSudip Mukherjee
On error the function ti_bandgap_get_sensor_data() returns the error code in ERR_PTR() but we only checked if the return value is NULL or not. And, so we can dereference an error code inside ERR_PTR. While at it, convert a check to IS_ERR_OR_NULL. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200424161944.6044-1-sudipm.mukherjee@gmail.com
2020-04-14thermal: Delete an error message in four functionsMarkus Elfring
The function “platform_get_irq” can log an error already. Thus omit redundant messages for the exception handling in the calling functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/05f49ae7-5cc7-d6a0-fc3d-abaf2a0b373c@web.de
2020-03-12thermal: ti-soc-thermal: Use GPIO descriptorsLinus Walleij
This switches the TI SoC thermal driver to use GPIO descriptors instead of retrieveing a GPIO number from the device tree and requesting the GPIO separately. Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200229210532.173430-1-linus.walleij@linaro.org
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-27thermal: ti-soc-thermal: remove dead codeBartlomiej Zolnierkiewicz
Majority of this code (i.e. functions from ti-bandgap.c) has been introduced in May 2013 by commit eb982001dbd8 ("thermal: introduce TI SoC thermal driver"). Just remove it altogether (in case it is needed it can be easily resurrected from git repo). While at it fix incorrect "not used" comments. Tested-by: Keerthy <j-keerthy@ti.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-06-01thermal: ti-soc-thermal: fix incorrect entry in omap5430_adc_to_temp[]Bartlomiej Zolnierkiewicz
Entry for Index 941 has one zero too much. Fix it. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-11-17Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - introduce brcmstb AVS TMON thermal driver (Brian Norris) - add Rockchip RV1108 support in rockchip thermal driver (Rocky Hao) - major rework on HISI driver plus additional support of hisi3660 (Daniel Lezcano) - add nvmem-cells binding on imx6sx (Leonard Crestez) - fix a NULL pointer dereference on ti thermal driver unloading (Tony Lindgren) - improve tmon tool to make it easier to cross-compile tmon (Markus Mayer) - add Coffee Lake and Cannon Lake support for intel processor and pch thermal drivers (Srinivas Pandruvada) - other small fixes and cleanups (Arvind Yadav, Colin Ian King, Allen Wild, Nicolin Chen, Baruch SiachNiklas Söderlund, Arnd Bergmann) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (44 commits) thermal: pch: Add Cannon Lake support thermal: int340x: processor_thermal: Add Coffee Lake support thermal: int340x: processor_thermal: Add Cannon Lake support thermal: bxt: remove redundant variable trip thermal: cpu_cooling: pr_err() strings should end with newlines thermal: add brcmstb AVS TMON driver Documentation: devicetree: add binding for Broadcom STB AVS TMON thermal/drivers/hisi: Add support for hi3660 SoC thermal/drivers/hisi: Prepare to add support for other hisi platforms thermal/drivers/hisi: Add platform prefix to function name thermal/drivers/hisi: Put platform code together thermal/drivers/qcom-spmi: Use devm_iio_channel_get thermal/drivers/generic-iio-adc: Switch tz request to devm version thermal/drivers/step_wise: Fix temperature regulation misbehavior thermal/drivers/hisi: Use round up step value thermal/drivers/hisi: Move the clk setup in the corresponding functions thermal/drivers/hisi: Remove mutex_lock in the code thermal/drivers/hisi: Remove thermal data back pointer thermal/drivers/hisi: Convert long to int thermal/drivers/hisi: Rename and remove unused field ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31thermal: ti-soc-thermal: Fix ti_thermal_unregister_cpu_cooling NULL pointer ↵Tony Lindgren
on unload While debugging some PM issues and trying to remove all the loaded modules, I ran across the following when unloading ti-soc-thermal: Unable to handle kernel NULL pointer dereference at virtual address 000000b4 ... [<c08db340>] (kobject_put) from [<bf28954c>] (ti_thermal_unregister_cpu_cooling+0x20/0x28 [ti_soc_thermal]) [<bf28954c>] (ti_thermal_unregister_cpu_cooling [ti_soc_thermal]) from [<bf287c88>] (ti_bandgap_remove+0x3c/0x104 [ti_soc_thermal]) [<bf287c88>] (ti_bandgap_remove [ti_soc_thermal]) from [<c0610d48>] (platform_drv_remove+0x24/0x3c) [<c0610d48>] (platform_drv_remove) from [<c060f114>] (device_release_driver_internal+0x160/0x208) [<c060f114>] (device_release_driver_internal) from [<c060f200>] (driver_detach+0x38/0x6c) [<c060f200>] (driver_detach) from [<c060e2d4>] (bus_remove_driver+0x4c/0xa0) [<c060e2d4>] (bus_remove_driver) from [<c01f2370>] (SyS_delete_module+0x168/0x238) [<c01f2370>] (SyS_delete_module) from [<c0108240>] (ret_fast_syscall+0x0/0x28) Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-07-05Merge branch 'linus' of ↵Zhang Rui
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2017-05-27thermal: cpu_cooling: use cpufreq_policy to register cooling deviceViresh Kumar
The CPU cooling driver uses the cpufreq policy, to get clip_cpus, the frequency table, etc. Most of the callers of CPU cooling driver's registration routines have the cpufreq policy with them, but they only pass the policy->related_cpus cpumask. The __cpufreq_cooling_register() routine then gets the policy by itself and uses it. It would be much better if the callers can pass the policy instead directly. This also fixes a basic design flaw, where the policy can be freed while the CPU cooling driver is still active. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Fix a typo in a comment lineMarkus Elfring
Add a missing character in this description for a function. Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Delete error messages for failed memory allocations in ↵Markus Elfring
ti_bandgap_build() The script "checkpatch.pl" pointed information out like the following. WARNING: Possible unnecessary 'out of memory' message Thus remove such statements here. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()Markus Elfring
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". This issue was detected by using the Coccinelle software. Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-03-29thermal: ti-soc-thermal: Remove redundant codeKeerthy
ti_thermal_expose_sensor always takes the devm_thermal_zone_of_sensor_register call for registration with the device tree nodes present for all the bandgap sensors for omap3/4/5 and dra7 family. There are large chunks of unused code. Removing all of them. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-03-29thermal: ti-soc-thermal: Remove redundant constantsKeerthy
Now that slope and offset data are being passed from device tree no need to populate in driver data. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-03-29thermal: ti-soc-thermal: Fetch slope and offset from DTKeerthy
Currently slope and offset values for calculating the hot spot temperature of a thermal zone is being taken directly from driver data. So fetch them from device tree. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18thermal: arm: dra752: Remove all TSHUT related definitionsKeerthy
No configuration needs to be done for TSHUT from software. Hence remove all the unnecessary definitions. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-13 00:11:00 +0000