summaryrefslogtreecommitdiff
path: root/drivers/thermal
AgeCommit message (Collapse)Author
2020-07-27thermal: qcom: tsens-v0_1: Add support for MSM8939Shawn Guo
The TSENS integrated on MSM8939 is a v0_1 device with 10 sensors. Different from its predecessor MSM8916, where 'calib_sel' bits sit in separate qfprom word, MSM8939 has 'cailb' and 'calib_sel' bits mixed and spread on discrete offsets. That's why all qfprom bits are read as one go and later mapped to calibration data for MSM8939. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Konrad Dybcio <konradybcio@gmail.com> /* on Asus Z00T smartphone */ Acked-by: Konrad Dybcio <konradybcio@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629144926.665-3-shawn.guo@linaro.org
2020-07-24thermal: core: Fix thermal zone lookup by IDThierry Reding
When a thermal zone is looked up by an ID and no zone is found matching that ID, the thermal_zone_get_by_id() function will return a pointer to the thermal zone list head which isn't actually a valid thermal zone. This can lead to a subsequent crash because a valid pointer is returned to the called, but dereferencing that pointer as struct thermal_zone is not safe. Fixes: 329b064fbd13 ("thermal: core: Get thermal zone by id") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200724170105.2705467-1-thierry.reding@gmail.com
2020-07-24thermal: int340x: processor_thermal: fix: update Jasper Lake PCI idSumeet Pawnikar
Update PCI device id for Jasper Lake processor thermal device. With this proc_thermal driver is getting loaded and processor thermal functionality works on Jasper Lake system. Fixes: f64a6583d3f5 ("thermal: int340x: processor_thermal: Add Jasper Lake support") Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1595577146-1221-1-git-send-email-sumeet.r.pawnikar@intel.com
2020-07-21thermal: imx8mm: Support module autoloadingAnson Huang
Add a missing MODULE_DEVICE_TABLE entry to support module autoloading. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1592380074-19222-1-git-send-email-Anson.Huang@nxp.com
2020-07-21thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()Dan Carpenter
This condition is reversed and will cause breakage. Fixes: 7440f518dad9 ("thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200616091949.GA11940@mwanda
2020-07-21thermal: rcar_gen3_thermal: Do not shadow thcode variableNiklas Söderlund
The function rcar_gen3_thermal_calc_coefs() takes an argument called 'thcode' which shadows the static global 'thcode' variable. This is not harmful but bad for readability and is harmful for planned changes to the driver. The THCODE values should be read from hardware fuses if they are available and only fallback to the global 'thcode' variable if they are not fused. Rename the global 'thcode' variable to 'thcodes' to avoid shadowing the symbol in functions that take it as an argument. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200610003300.884258-1-niklas.soderlund+renesas@ragnatech.se
2020-07-21thermal: core: Move initialization after core initcallDaniel Lezcano
The generic netlink is initialized at subsys_initcall, so far after the thermal init routine and the thermal generic netlink family initialization. On ŝome platforms, that leads to a memory corruption. The fix was sent to netdev@ to move the genetlink framework initialization at core_initcall. Move the thermal core initialization to postcore level which is very close to core level. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200717164217.18819-2-daniel.lezcano@linaro.org
2020-07-21thermal: netlink: Improve the initcall orderingDaniel Lezcano
The initcalls like to play joke. In our case, the thermal-netlink initcall is called after the thermal-core initcall but this one sends a notification before the former is initialized. No issue was spotted, but it could lead to a memory corruption, so instead of relying on the core_initcall for the thermal-netlink, let's initialize directly from the thermal-core init routine, so we have full control of the init ordering. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200717164217.18819-1-daniel.lezcano@linaro.org
2020-07-21thermal: rcar_gen3_thermal: Add r8a774e1 supportMarian-Cristian Rotariu
Add r8a774e1 specific compatible string. Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1594811350-14066-4-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
2020-07-21thermal/drivers/clock_cooling: Remove clock_cooling codeAmit Kucheria
clock_cooling has no in-kernel users. It has never found any use in drivers as far as I can tell. Remove the code. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/aa5d5ac2589cf7b14ece882130731b4a916849a6.1593619943.git.amit.kucheria@linaro.org
2020-07-21thermal: core: remove redundant initialization of variable retColin Ian King
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706140747.489075-1-colin.king@canonical.com
2020-07-21thermal: netlink: Fix compilation error when CONFIG_NET=nDaniel Lezcano
When the network is not configured, the netlink is disabled on all the system. The thermal framework assumed the netlink is always opt-in. Fix this by adding a Kconfig option for the netlink notification, defaulting to yes and depending on CONFIG_NET. As the change implies multiple stubs and in order to not pollute the internal thermal header, the thermal_nelink.h has been added and included in the thermal_core.h, so this one regain some kind of clarity. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20200707090159.1018-1-daniel.lezcano@linaro.org
2020-07-07thermal: core: Add notifications call in the frameworkDaniel Lezcano
The generic netlink protocol is implemented but the different notification functions are not yet connected to the core code. These changes add the notification calls in the different corresponding places. Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200706105538.2159-4-daniel.lezcano@linaro.org
2020-07-07thermal: core: genetlink support for events/cmd/samplingDaniel Lezcano
Initially the thermal framework had a very simple notification mechanism to send generic netlink messages to the userspace. The notification function was never called from anywhere and the corresponding dead code was removed. It was probably a first attempt to introduce the netlink notification. At LPC2018, the presentation "Linux thermal: User kernel interface", proposed to create the notifications to the userspace via a kfifo. The advantage of the kfifo is the performance. It is usually used from a 1:1 communication channel where a driver captures data and sends it as fast as possible to a userspace process. The drawback is that only one process uses the notification channel exclusively, thus no other process is allowed to use the channel to get temperature or notifications. This patch defines a generic netlink API to discover the current thermal setup and adds event notifications as well as temperature sampling. As any genetlink protocol, it can evolve and the versioning allows to keep the backward compatibility. In order to prevent the user from getting flooded with data on a single channel, there are two multicast channels, one for the temperature sampling when the thermal zone is updated and another one for the events, so the user can get the events only without the thermal zone temperature sampling. Also, a list of commands to discover the thermal setup is added and can be extended when needed. Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200706105538.2159-3-daniel.lezcano@linaro.org
2020-07-07thermal: core: Get thermal zone by idDaniel Lezcano
The next patch will introduce the generic netlink protocol to handle events, sampling and command from the thermal framework. In order to deal with the thermal zone, it uses its unique identifier to characterize it in the message. Passing an integer is more efficient than passing an entire string. This change provides a function returning back a thermal zone pointer corresponding to the identifier passed as parameter. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200706105538.2159-2-daniel.lezcano@linaro.org
2020-07-07thermal: core: Add helpers to browse the cdev, tz and governor listDaniel Lezcano
The cdev, tz and governor list, as well as their respective locks are statically defined in the thermal_core.c file. In order to give a sane access to these list, like browsing all the thermal zones or all the cooling devices, let's define a set of helpers where we pass a callback as a parameter to be called for each thermal entity. We keep the self-encapsulation and ensure the locks are correctly taken when looking at the list. Acked-by: Zhang Rui <rui.zhang@intel.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706105538.2159-1-daniel.lezcano@linaro.org
2020-07-07thermal: Make thermal_zone_device_is_enabled() available to core onlyAndrzej Pietrasiewicz
This function is not needed by drivers. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200703104354.19657-4-andrzej.p@collabora.com
2020-07-07thermal: imx: Use driver's local data to decide whether to run a measurementAndrzej Pietrasiewicz
Use driver's local data to evaluate the need to run or not to run a measurement. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200703104354.19657-3-andrzej.p@collabora.com
2020-06-29thermal: Rename set_mode() to change_mode()Andrzej Pietrasiewicz
set_mode() is only called when tzd's mode is about to change. Actual setting is performed in thermal_core, in thermal_zone_device_set_mode(). The meaning of set_mode() callback is actually to notify the driver about the mode being changed and giving the driver a chance to oppose such change. To better reflect the purpose of the method rename it to change_mode() Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-12-andrzej.p@collabora.com
2020-06-29thermal: Simplify or eliminate unnecessary set_mode() methodsAndrzej Pietrasiewicz
Setting polling_delay is now done at thermal_core level (by not polling DISABLED devices), so no need to repeat this code. int340x: Checking for an impossible enum value is unnecessary. acpi/thermal: It only prints debug messages. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-11-andrzej.p@collabora.com
2020-06-29thermal: core: Stop polling DISABLED thermal devicesAndrzej Pietrasiewicz
Polling DISABLED devices is not desired, as all such "disabled" devices are meant to be handled by userspace. This patch introduces and uses should_stop_polling() to decide whether the device should be polled or not. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-10-andrzej.p@collabora.com
2020-06-29thermal: Explicitly enable non-changing thermal zone devicesAndrzej Pietrasiewicz
Some thermal zone devices never change their state, so they should be always enabled. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-9-andrzej.p@collabora.com
2020-06-29thermal: Use mode helpers in driversAndrzej Pietrasiewicz
Use thermal_zone_device_{en|dis}able() and thermal_zone_device_is_enabled(). Consequently, all set_mode() implementations in drivers: - can stop modifying tzd's "mode" member, - shall stop taking tzd's lock, as it is taken in the helpers - shall stop calling thermal_zone_device_update() as it is called in the helpers - can assume they are called when the mode truly changes, so checks to verify that can be dropped Not providing set_mode() by a driver no longer prevents the core from being able to set tzd's mode, so the relevant check in mode_store() is removed. Other comments: - acpi/thermal.c: tz->thermal_zone->mode will be updated only after we return from set_mode(), so use function parameter in thermal_set_mode() instead, no need to call acpi_thermal_check() in set_mode() - thermal/imx_thermal.c: regmap writes and mode assignment are done in thermal_zone_device_{en|dis}able() and set_mode() callback - thermal/intel/intel_quark_dts_thermal.c: soc_dts_{en|dis}able() are a part of set_mode() callback, so they don't need to modify tzd->mode, and don't need to fall back to the opposite mode if unsuccessful, as the return value will be propagated to thermal_zone_device_{en|dis}able() and ultimately tzd's member will not be changed in thermal_zone_device_set_mode(). - thermal/of-thermal.c: no need to set zone->mode to DISABLED in of_parse_thermal_zones() as a tzd is kzalloc'ed so mode is DISABLED anyway Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-8-andrzej.p@collabora.com
2020-06-29thermal: Add mode helpersAndrzej Pietrasiewicz
Prepare for making the drivers not access tzd's private members. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> [staticize thermal_zone_device_set_mode()] Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-7-andrzej.p@collabora.com
2020-06-29thermal: remove get_mode() operation of driversAndrzej Pietrasiewicz
get_mode() is now redundant, as the state is stored in struct thermal_zone_device. Consequently the "mode" attribute in sysfs can always be visible, because it is always possible to get the mode from struct tzd. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-6-andrzej.p@collabora.com
2020-06-29thermal: Store device mode in struct thermal_zone_deviceAndrzej Pietrasiewicz
Prepare for eliminating get_mode(). Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-5-andrzej.p@collabora.com
2020-06-29thermal: Store thermal mode in a dedicated enumAndrzej Pietrasiewicz
Prepare for storing mode in struct thermal_zone_device. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> [for acerhdf] Acked-by: Peter Kaestle <peter@piie.net> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-3-andrzej.p@collabora.com
2020-06-12Merge tag 'thermal-v5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add the hwmon support on the i.MX SC (Anson Huang) - Thermal framework cleanups (self-encapsulation, pointless stubs, private structures) (Daniel Lezcano) - Use the PM QoS frequency changes for the devfreq cooling device (Matthias Kaehlcke) - Remove duplicate error messages from platform_get_irq() error handling (Markus Elfring) - Add support for the bandgap sensors (Keerthy) - Statically initialize .get_mode/.set_mode ops (Andrzej Pietrasiewicz) - Add Renesas R-Car maintainer entry (Niklas Söderlund) - Fix error checking after calling ti_bandgap_get_sensor_data() for the TI SoC thermal (Sudip Mukherjee) - Add latency constraint for the idle injection, the DT binding and the change the registering function (Daniel Lezcano) - Convert the thermal framework binding to the Yaml schema (Amit Kucheria) - Replace zero-length array with flexible-array on i.MX 8MM (Gustavo A. R. Silva) - Thermal framework cleanups (alphabetic order for heads, replace module.h by export.h, make file naming consistent) (Amit Kucheria) - Merge tsens-common into the tsens driver (Amit Kucheria) - Fix platform dependency for the Qoriq driver (Geert Uytterhoeven) - Clean up the rcar_thermal_update_temp() function in the rcar thermal driver (Niklas Söderlund) - Fix the TMSAR register for the TMUv2 on the Qoriq platform (Yuantian Tang) - Export GDDV, OEM vendor variables, and don't require IDSP for the int340x thermal driver - trivial conflicts fixed (Matthew Garrett) * tag 'thermal-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (48 commits) thermal/int340x_thermal: Don't require IDSP to exist thermal/int340x_thermal: Export OEM vendor variables thermal/int340x_thermal: Export GDDV thermal: qoriq: Update the settings for TMUv2 thermal: rcar_thermal: Clean up rcar_thermal_update_temp() thermal: qoriq: Add platform dependencies drivers: thermal: tsens: Merge tsens-common.c into tsens.c thermal/of: Rename of-thermal.c thermal/governors: Prefix all source files with gov_ thermal/drivers/user_space: Sort headers alphabetically thermal/drivers/of-thermal: Sort headers alphabetically thermal/drivers/cpufreq_cooling: Replace module.h with export.h thermal/drivers/cpufreq_cooling: Sort headers alphabetically thermal/drivers/clock_cooling: Include export.h thermal/drivers/clock_cooling: Sort headers alphabetically thermal/drivers/thermal_hwmon: Include export.h thermal/drivers/thermal_hwmon: Sort headers alphabetically thermal/drivers/thermal_helpers: Include export.h thermal/drivers/thermal_helpers: Sort headers alphabetically thermal/core: Replace module.h with export.h ...
2020-05-29thermal/int340x_thermal: Don't require IDSP to existMatthew Garrett
The IDSP method doesn't appear to exist on the most recent Intel platforms: instead, the IDSP data is included in the GDDV blob. Since we probably don't want to decompress and parse that in-kernel, just allow any UUID to be written if IDSP is missing. Signed-off-by: Matthew Garrett <mjg59@google.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com> [ rzhang: fix checkpatch warning in changelog ] Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200414020953.255364-3-matthewgarrett@google.com
2020-05-29thermal/int340x_thermal: Export OEM vendor variablesMatthew Garrett
The platform vendor may expose an array of OEM-specific values to be used in determining DPTF policy. These are obtained via the ODVP method, and then simply exposed in sysfs. In addition, they are updated when a notification is received or when the DPTF policy is changed by userland. Conflicts: drivers/thermal/intel/int340x_thermal/int3400_thermal.c Signed-off-by: Matthew Garrett <mjg59@google.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200414020953.255364-2-matthewgarrett@google.com
2020-05-29thermal/int340x_thermal: Export GDDVMatthew Garrett
Implementing DPTF properly requires making use of firmware-provided information associated with the INT3400 device. Calling GDDV provides a buffer of information which userland can then interpret to determine appropriate DPTF policy. Conflicts: drivers/thermal/intel/int340x_thermal/int3400_thermal.c Signed-off-by: Matthew Garrett <mjg59@google.com> Tested-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20200414020953.255364-1-matthewgarrett@google.com
2020-05-29thermal: qoriq: Update the settings for TMUv2Yuantian Tang
For TMU v2, TMSAR registers need to be set properly to get the accurate temperature values. Also the temperature read needs to be converted to degree Celsius since it is in degrees Kelvin. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200526060212.4118-1-andy.tang@nxp.com
2020-05-22thermal: rcar_thermal: Clean up rcar_thermal_update_temp()Niklas Söderlund
Moving the ctemp variable out of the private data structure made it possible to clean up rcar_thermal_update_temp(). Initialize the local ctemp to the error code to return if the reading fails and just return it at the end of the function. It's OK to change the datatype of old, new and ctemp to int as all values are ANDed with CTEMP (0x3f) before being stored. While at it change the datatype of the loop variable 'i' to to unsigned int. Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200514152505.1927634-1-niklas.soderlund+renesas@ragnatech.se
2020-05-22thermal: qoriq: Add platform dependenciesGeert Uytterhoeven
The QorIQ Thermal Monitoring Unit is only present on Freescale E500MC and Layerscape SoCs, and on NXP i.MX8 SoCs. Add platform dependencies to the QORIQ_THERMAL config symbol, to avoid asking the user about it when configuring a kernel without support for any of the aforementioned SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200507112955.23520-5-geert+renesas@glider.be
2020-05-22drivers: thermal: tsens: Merge tsens-common.c into tsens.cAmit Kucheria
tsens-common.c has outlived its usefuless. It was created expecting lots of custom routines per version of the TSENS IP. We haven't needed those, there is now only data in the version-specific files. Merge the code for tsens-common.c into tsens.c. As a result, - Remove any unnecessary forward declarations in tsens.h. - Add a Linaro copyright to tsens.c. - Fixup the Makefile to remove tsens-common.c. - Where it made sense, fix some 80-column alignments in the tsens-common.c code being copied over. There is no functional change with this patch. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/e30e2ba6fa5c007983afd4d7d4e0311c0b57917a.1588183879.git.amit.kucheria@linaro.org
2020-05-22thermal/of: Rename of-thermal.cAmit Kucheria
Core thermal framework code files should start with thermal_*. of-thermal.c does not follow this pattern and can easily be confused with platform driver. Fix this by renaming it to thermal_of.c Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/f5e233d5c5dcc7c7cb56b3448da255cb2c9ef0d1.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/governors: Prefix all source files with gov_Amit Kucheria
Bang-bang governor source file is prefixed with gov_. Do the same for other governors for consistency so they're easy to find in the sources. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/b9a85d3204712f14e320504948c12712dc0b291b.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/drivers/user_space: Sort headers alphabeticallyAmit Kucheria
Sort headers to make it easier to read and find duplicate headers. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/406d0c7c961e997b42e25adf4e432fe4f57b315a.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/drivers/of-thermal: Sort headers alphabeticallyAmit Kucheria
Sort headers to make it easier to read and find duplicate headers. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/f9f9d8117f1659872114ba65bbfa9ed4b813128f.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/drivers/cpufreq_cooling: Replace module.h with export.hAmit Kucheria
cpufreq_cooling cannot be modular, remove the unnecessary module.h include and replace with export.h to handle EXPORT_SYMBOL family of macros. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/7a439e41e91d8bc5ff99207f99723fcf04ca36eb.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/drivers/cpufreq_cooling: Sort headers alphabeticallyAmit Kucheria
Sort headers to make it easier to read and find duplicate headers. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/4231f5dfe758b9bf716981be71cadf9642c83528.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/drivers/clock_cooling: Include export.hAmit Kucheria
It is preferrable to include export.h when you are using EXPORT_SYMBOL family of macros. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/25f16415ab7b7587a052f1bce4133da318d58192.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/drivers/clock_cooling: Sort headers alphabeticallyAmit Kucheria
Sort headers to make it easier to read and find duplicate headers. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/f8e1258fd8b882bab018de63c7e713b4334fec30.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/drivers/thermal_hwmon: Include export.hAmit Kucheria
It is preferable to include export.h when you are using EXPORT_SYMBOL family of macros. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/f542962494a8441fdc8e550a11d0e535b92362a0.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/drivers/thermal_hwmon: Sort headers alphabeticallyAmit Kucheria
Sort headers to make it easier to read and find duplicate headers. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/29b64f1fe81e674c753c8f8309c310acd782ebea.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/drivers/thermal_helpers: Include export.hAmit Kucheria
It is preferable to include export.h when you are using EXPORT_SYMBOL family of macros. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/fd3443f00dbba6ca90f35726c7451ae52145d2d4.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/drivers/thermal_helpers: Sort headers alphabeticallyAmit Kucheria
Sort headers to make it easier to read and find duplicate headers. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/133db154796f354e6c51e6310095f679e1f45441.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/core: Replace module.h with export.hAmit Kucheria
Thermal core cannot be modular, remove the unnecessary module.h include and replace with export.h to handle EXPORT_SYMBOL family of macros. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/33af23406dcdb0c62dae1e6401446b997ccb449f.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal/core: Get rid of MODULE_* tagsAmit Kucheria
The thermal framework can no longer be compiled as a module as of commit 554b3529fe01 ("thermal/drivers/core: Remove the module Kconfig's option"). Remove the MODULE_* tags. Rui is mentioned in the copyright line at the top of the file and the license is mentioned in the SPDX tags. So no loss of information. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/74339a09a55f8f3d86c4074fc2bf853a302d6186.1589199124.git.amit.kucheria@linaro.org
2020-05-22thermal: imx8mm: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200507192517.GA16557@embeddedor
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-14 01:33:14 +0000