summaryrefslogtreecommitdiff
path: root/drivers/tty/sysrq.c
AgeCommit message (Collapse)Author
2022-06-23Merge branch 'rework/kthreads' into for-linusPetr Mladek
2022-06-23Revert "printk: add functions to prefer direct printing"Petr Mladek
This reverts commit 2bb2b7b57f81255c13f4395ea911d6bdc70c9fe2. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com
2022-06-03Merge tag 'tty-5.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.19-rc1. Lots of tiny cleanups in here, the major stuff is: - termbit cleanups and unification by Ilpo. A much needed change that goes a long way to making things simpler for all of the different arches - tty documentation cleanups and movements to their own place in the documentation tree - old tty driver cleanups and fixes from Jiri to bring some existing drivers into the modern world - RS485 cleanups and unifications to make it easier for individual drivers to support this mode instead of having to duplicate logic in each driver - Lots of 8250 driver updates and additions - new device id additions - n_gsm continued fixes and cleanups - other minor serial driver updates and cleanups All of these have been in linux-next for weeks with no reported issues" * tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits) tty: Rework receive flow control char logic pcmcia: synclink_cs: Don't allow CS5-6 serial: stm32-usart: Correct CSIZE, bits, and parity serial: st-asc: Sanitize CSIZE and correct PARENB for CS7 serial: sifive: Sanitize CSIZE and c_iflag serial: sh-sci: Don't allow CS5-6 serial: txx9: Don't allow CS5-6 serial: rda-uart: Don't allow CS5-6 serial: digicolor-usart: Don't allow CS5-6 serial: uartlite: Fix BRKINT clearing serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE serial: core: Do stop_rx in suspend path for console if console_suspend is disabled tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate. dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL" serial: msm_serial: disable interrupts in __msm_console_write() serial: meson: acquire port->lock in startup() serial: 8250_dw: Use dev_err_probe() serial: 8250_dw: Use devm_add_action_or_reset() ...
2022-04-26sysrq: do not omit current cpu when showing backtrace of all active CPUsChangbin Du
The backtrace of current CPU also should be printed as it is active. This change add stack trace for current CPU and print a hint for idle CPU for the generic workqueue based printing. (x86 already does this) Now it looks like below: [ 279.401567] sysrq: Show backtrace of all active CPUs [ 279.407234] sysrq: CPU5: [ 279.407505] Call Trace: [ 279.408789] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a [ 279.411698] [<ffffffff800060ac>] show_stack+0x32/0x3e [ 279.411809] [<ffffffff80542258>] sysrq_handle_showallcpus+0x4c/0xc6 [ 279.411929] [<ffffffff80542f16>] __handle_sysrq+0x106/0x26c [ 279.412034] [<ffffffff805436a8>] write_sysrq_trigger+0x64/0x74 [ 279.412139] [<ffffffff8029cd48>] proc_reg_write+0x8e/0xe2 [ 279.412252] [<ffffffff8021a8f8>] vfs_write+0x90/0x2be [ 279.412362] [<ffffffff8021acd2>] ksys_write+0xa6/0xce [ 279.412467] [<ffffffff8021ad24>] sys_write+0x2a/0x38 [ 279.412689] [<ffffffff80003ff8>] ret_from_syscall+0x0/0x2 [ 279.417173] sysrq: CPU6: backtrace skipped as idling [ 279.417185] sysrq: CPU4: backtrace skipped as idling [ 279.417187] sysrq: CPU0: backtrace skipped as idling [ 279.417181] sysrq: CPU7: backtrace skipped as idling [ 279.417190] sysrq: CPU1: backtrace skipped as idling [ 279.417193] sysrq: CPU3: backtrace skipped as idling [ 279.417219] sysrq: CPU2: [ 279.419179] Call Trace: [ 279.419440] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a [ 279.419782] [<ffffffff800060ac>] show_stack+0x32/0x3e [ 279.420015] [<ffffffff80542b30>] showacpu+0x5c/0x96 [ 279.420317] [<ffffffff800ba71c>] flush_smp_call_function_queue+0xd6/0x218 [ 279.420569] [<ffffffff800bb438>] generic_smp_call_function_single_interrupt+0x14/0x1c [ 279.420798] [<ffffffff800079ae>] handle_IPI+0xaa/0x13a [ 279.421024] [<ffffffff804dcb92>] riscv_intc_irq+0x56/0x70 [ 279.421274] [<ffffffff80a05b70>] generic_handle_arch_irq+0x6a/0xfa [ 279.421518] [<ffffffff80004006>] ret_from_exception+0x0/0x10 [ 279.421750] [<ffffffff80096492>] rcu_idle_enter+0x16/0x1e Signed-off-by: Changbin Du <changbin.du@gmail.com> Link: https://lore.kernel.org/r/20220117154300.2808-1-changbin.du@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22printk: add functions to prefer direct printingJohn Ogness
Once kthread printing is available, console printing will no longer occur in the context of the printk caller. However, there are some special contexts where it is desirable for the printk caller to directly print out kernel messages. Using pr_flush() to wait for threaded printers is only possible if the caller is in a sleepable context and the kthreads are active. That is not always the case. Introduce printk_prefer_direct_enter() and printk_prefer_direct_exit() functions to explicitly (and globally) activate/deactivate preferred direct console printing. The term "direct console printing" refers to printing to all enabled consoles from the context of the printk caller. The term "prefer" is used because this type of printing is only best effort. If the console is currently locked or other printers are already actively printing, the printk caller will need to rely on the other contexts to handle the printing. This preferred direct printing is how all printing has been handled until now (unless it was explicitly deferred). When kthread printing is introduced, there may be some unanticipated problems due to kthreads being unable to flush important messages. In order to minimize such risks, preferred direct printing is activated for the primary important messages when the system experiences general types of major errors. These are: - emergency reboot/shutdown - cpu and rcu stalls - hard and soft lockups - hung tasks - warn - sysrq Note that since kthread printing does not yet exist, no behavior changes result from this commit. This is only implementing the counter and marking the various places where preferred direct printing is active. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220421212250.565456-13-john.ogness@linutronix.de
2022-04-22tty/sysrq: change the definition of sysrq_key_table's element to make it ↵Junwen Wu
more readable The definition of sysrq_key_table's elements, like sysrq_thaw_op and sysrq_showallcpus_op are not consistent with sysrq_ftrace_dump_op, Consistency makes code more readable. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Junwen Wu <wudaemon@gmail.com> Link: https://lore.kernel.org/r/20220418153703.97705-1-wudaemon@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-04Merge tag 'tty-5.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.16-rc1. Nothing major in here at all, just lots of tiny serial and tty driver updates for various reported things, and some good cleanups. These include: - more good tty api cleanups from Jiri - stm32 serial driver updates - softlockup fix for non-preempt systems under high serial load - rpmsg serial driver update - 8250 drivers updates and fixes - n_gsm line discipline fixes and updates as people are finally starting to use it. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (86 commits) tty: Fix extra "not" in TTY_DRIVER_REAL_RAW description serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE tty: rpmsg: Define tty name via constant string literal tty: rpmsg: Add pr_fmt() to prefix messages tty: rpmsg: Use dev_err_probe() in ->probe() tty: rpmsg: Unify variable used to keep an error code tty: rpmsg: Assign returned id to a local variable serial: stm32: push DMA RX data before suspending serial: stm32: terminate / restart DMA transfer at suspend / resume serial: stm32: rework RX dma initialization and release serial: 8250_pci: Remove empty stub pci_quatech_exit() serial: 8250_pci: Replace custom pci_match_id() implementation serial: xilinx_uartps: Fix race condition causing stuck TX serial: sunzilog: Mark sunzilog_putchar() __maybe_unused Revert "tty: hvc: pass DMA capable memory to put_chars()" Revert "virtio-console: remove unnecessary kmemdup()" serial: 8250_pci: Replace dev_*() by pci_*() macros serial: 8250_pci: Get rid of redundant 'else' keyword serial: 8250_pci: Refactor the loop in pci_ite887x_init() tty: add rpmsg driver ...
2021-10-20workqueue: Introduce show_one_worker_pool and show_one_workqueue.Imran Khan
Currently show_workqueue_state shows the state of all workqueues and of all worker pools. In certain cases we may need to dump state of only a specific workqueue or worker pool. For example in destroy_workqueue we only need to show state of the workqueue which is getting destroyed. So rename show_workqueue_state to show_all_workqueues(to signify it dumps state of all busy workqueues) and divide it into more granular functions (show_one_workqueue and show_one_worker_pool), that would show states of individual workqueues and worker pools and can be used in cases such as the one mentioned above. Also, as mentioned earlier, make destroy_workqueue dump data pertaining to only the workqueue that is being destroyed and make user(s) of earlier interface(show_workqueue_state), use new interface (show_all_workqueues). Signed-off-by: Imran Khan <imran.f.khan@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2021-10-10tty/sysrq: More intuitive Shift handlingOskari Pirhonen
Make Alt-SysRq-Shift-<key> behave like Alt-Shift-SysRq-<key>. Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Oskari Pirhonen <xxc3ncoredxx@gmail.com> Link: https://lore.kernel.org/r/YU/6SCmUr9qGkqBu@dj3ntoo Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-16tty: replace in_irq() with in_hardirq()Changbin Du
Replace the obsolete and ambiguos macro in_irq() with new macro in_hardirq(). Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Changbin Du <changbin.du@gmail.com> Link: https://lore.kernel.org/r/20210814005033.2381-1-changbin.du@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-10tty/sysrq: Fix issues of code indent should use tabsXiaofei Tan
Fix issues of code indent should use tabs, reported by checkpatch.pl. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Link: https://lore.kernel.org/r/1617779210-51576-3-git-send-email-tanxiaofei@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-10tty/sysrq: Add a blank line after declarationsXiaofei Tan
Add a blank line after declarations, reported by checkpatch.pl. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Link: https://lore.kernel.org/r/1617779210-51576-2-git-send-email-tanxiaofei@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-02tty/sysrq: Extend the sysrq_key_table to cover capital lettersAndrzej Pietrasiewicz
All slots in sysrq_key_table[] are either used, reserved or at least commented with their intended use. This patch adds capital letter versions available, which means adding 26 more entries. For already existing SysRq operations the user presses Alt-SysRq-<key>, and for the newly added ones Alt-Shift-SysRq-<key>. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://lore.kernel.org/r/20200818112825.6445-2-andrzej.p@collabora.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24tty/sysrq: emergency_thaw_all does not depend on CONFIG_BLOCKChristoph Hellwig
We can also thaw non-block file systems. Remove the CONFIG_BLOCK in sysrq.c after making the prototype available unconditionally. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-09kernel: rename show_stack_loglvl() => show_stack()Dmitry Safonov
Now the last users of show_stack() got converted to use an explicit log level, show_stack_loglvl() can drop it's redundant suffix and become once again well known show_stack(). Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09sysrq: use show_stack_loglvl()Dmitry Safonov
Show the stack trace on a CPU with the same log level as "CPU%d" header. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Link: http://lkml.kernel.org/r/20200418201944.482088-45-dima@arista.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-15tty/sysrq: constify the the sysrq_key_op(s)Emil Velikov
All the users threat them as immutable - annotate them as such. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://lore.kernel.org/r/20200513214351.2138580-3-emil.l.velikov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15tty/sysrq: constify the sysrq APIEmil Velikov
The user is not supposed to thinker with the underlying sysrq_key_op. Make that explicit by adding a handful of const notations. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://lore.kernel.org/r/20200513214351.2138580-2-emil.l.velikov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15tty/sysrq: alpha: export and use __sysrq_get_key_op()Emil Velikov
Export a pointer to the sysrq_get_key_op(). This way we can cleanly unregister it, instead of the current solutions of modifuing it inplace. Since __sysrq_get_key_op() is no longer used externally, let's make it a static function. This patch will allow us to limit access to each and every sysrq op and constify the sysrq handling. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: linux-kernel@vger.kernel.org Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: linux-alpha@vger.kernel.org Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Link: https://lore.kernel.org/r/20200513214351.2138580-1-emil.l.velikov@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-20tty/sysrq: Export sysrq_mask(), sysrq_toggle_support()Dmitry Safonov
Build fix for serial_core being module: ERROR: modpost: "sysrq_toggle_support" [drivers/tty/serial/serial_core.ko] undefined! ERROR: modpost: "sysrq_mask" [drivers/tty/serial/serial_core.ko] undefined! Fixes: eaee41727e6d ("sysctl/sysrq: Remove __sysrq_enabled copy") Cc: Jiri Slaby <jslaby@suse.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20200420172317.599611-1-dima@arista.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-07sysctl/sysrq: Remove __sysrq_enabled copyDmitry Safonov
Many embedded boards have a disconnected TTL level serial which can generate some garbage that can lead to spurious false sysrq detects. Currently, sysrq can be either completely disabled for serial console or always disabled (with CONFIG_MAGIC_SYSRQ_SERIAL), since commit 732dbf3a6104 ("serial: do not accept sysrq characters via serial port") At Arista, we have such boards that can generate BREAK and random garbage. While disabling sysrq for serial console would solve the problem with spurious false sysrq triggers, it's also desirable to have a way to enable sysrq back. Having the way to enable sysrq was beneficial to debug lockups with a manual investigation in field and on the other side preventing false sysrq detections. As a preparation to add sysrq_toggle_support() call into uart, remove a private copy of sysrq_enabled from sysctl - it should reflect the actual status of sysrq. Furthermore, the private copy isn't correct already in case sysrq_always_enabled is true. So, remove __sysrq_enabled and use a getter-helper sysrq_mask() to check sysrq_key_op enabled status. Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20200302175135.269397-2-dima@arista.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-17sysrq: Remove sysrq_handler_registeredDmitry Safonov
sysrq_toggle_support() can be called in parallel, in return calling input_(un)register_handler(), which fortunately is safe to call in parallel and regardless of registered/unregistered status of sysrq_handler. Remove sysrq_handler_registered as it doesn't have any function there and may confuse reader about possible race. Signed-off-by: Dmitry Safonov <dima@arista.com> Link: https://lore.kernel.org/r/20191213000657.931618-2-dima@arista.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14panic: avoid the extra noise dmesgFeng Tang
When kernel panic happens, it will first print the panic call stack, then the ending msg like: [ 35.743249] ---[ end Kernel panic - not syncing: Fatal exception [ 35.749975] ------------[ cut here ]------------ The above message are very useful for debugging. But if system is configured to not reboot on panic, say the "panic_timeout" parameter equals 0, it will likely print out many noisy message like WARN() call stack for each and every CPU except the panic one, messages like below: WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190 Call Trace: <IRQ> try_to_wake_up default_wake_function autoremove_wake_function __wake_up_common __wake_up_common_lock __wake_up wake_up_klogd_work_func irq_work_run_list irq_work_tick update_process_times tick_sched_timer __hrtimer_run_queues hrtimer_interrupt smp_apic_timer_interrupt apic_timer_interrupt For people working in console mode, the screen will first show the panic call stack, but immediately overridden by these noisy extra messages, which makes debugging much more difficult, as the original context gets lost on screen. Also these noisy messages will confuse some users, as I have seen many bug reporters posted the noisy message into bugzilla, instead of the real panic call stack and context. Adding a flag "suppress_printk" which gets set in panic() to avoid those noisy messages, without changing current kernel behavior that both panic blinking and sysrq magic key can work as is, suggested by Petr Mladek. To verify this, make sure kernel is not configured to reboot on panic and in console # echo c > /proc/sysrq-trigger to see if console only prints out the panic call stack. Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Suggested-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-28tty/sysrq: Convert show_lock to raw_spinlock_tJulien Grall
Systems which don't provide arch_trigger_cpumask_backtrace() will invoke showacpu() from a smp_call_function() function which is invoked with disabled interrupts even on -RT systems. The function acquires the show_lock lock which only purpose is to ensure that the CPUs don't print simultaneously. Otherwise the output would clash and it would be hard to tell the output from CPUx apart from CPUy. On -RT the spin_lock() can not be acquired from this context. A raw_spin_lock() is required. It will introduce the system's latency by performing the sysrq request and other CPUs will block on the lock until the request is done. This is okay because the user asked for a backtrace of all active CPUs and under "normal circumstances in production" this path should not be triggered. Signed-off-by: Julien Grall <julien.grall@arm.com> [bigeasy@linuxtronix.de: commit description] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22sysrq: Remove duplicated sysrq messagePetr Mladek
The commit 97f5f0cd8cd0a0544 ("Input: implement SysRq as a separate input handler") added pr_fmt() definition. It caused a duplicated message prefix in the sysrq header messages, for example: [ 177.053931] sysrq: SysRq : Show backtrace of all active CPUs [ 742.864776] sysrq: SysRq : HELP : loglevel(0-9) reboot(b) crash(c) Fixes: 97f5f0cd8cd0a05 ("Input: implement SysRq as a separate input handler") Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22sysrq: Restore original console_loglevel when sysrq disabledPetr Mladek
The sysrq header line is printed with an increased loglevel to provide users some positive feedback. The original loglevel is not restored when the sysrq operation is disabled. This bug was introduced in 2.6.12 (pre-git-history) by the commit ("Allow admin to enable only some of the Magic-Sysrq functions"). Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-05tty/sysrq: Do not call sync directly from sysrq_do_reset()Mark Tomlinson
sysrq_do_reset() is called in softirq context, so it cannot call sync() directly. Instead, call orderly_reboot(), which creates a work item to run /sbin/reboot, or do emergency_sync and restart if the command fails. Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27sysrq: Use panic() to force a crashMatthias Kaehlcke
sysrq_handle_crash() currently forces a crash by dereferencing a NULL pointer, which is undefined behavior in C. Just call panic() instead, which is simpler and doesn't depend on compiler specific handling of the undefined behavior. Remove the comment on why the RCU lock needs to be released, it isn't accurate anymore since the crash now isn't handled by the page fault handler (for reference: the comment was added by commit 984cf355aeaa ("sysrq: Fix warning in sysrq generated crash.")). Releasing the lock is still good practice though. Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-27tty/sysrq: add of_node_put()Yangtao Li
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. bl_idle_init() doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-11signal: send_sig_all no longer needs SEND_SIG_FORCEDEric W. Biederman
Now that send_signal always delivers SEND_SIG_PRIV signals to a pid namespace init it is no longer necessary to use SEND_SIG_FORCED when calling do_send_sig_info to ensure that pid namespace inits are signaled and possibly killed. Using SEND_SIG_PRIV is sufficient. So use SEND_SIG_PRIV so that userspace when it receives a SIGTERM can tell that the kernel sent the signal and not some random userspace application. Fixes: b82c32872db2 ("sysrq: use SEND_SIG_FORCED instead of force_sig()") Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-07-21signal: Pass pid type into do_send_sig_infoEric W. Biederman
This passes the information we already have at the call sight into do_send_sig_info. Ultimately allowing for better handling of signals sent to a group of processes during fork. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-04-02fs: add ksys_sync() helper; remove in-kernel calls to sys_sync()Dominik Brodowski
Using this helper allows us to avoid the in-kernel calls to the sys_sync() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as sys_sync(). This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2017-11-13Merge tag 'tty-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big tty/serial driver pull request for 4.15-rc1. Lots of serial driver updates in here, some small vt cleanups, and a raft of SPDX and license boilerplate cleanups, messing up the diffstat a bit. Nothing major, with no realy functional changes except better hardware support for some platforms. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits) tty: ehv_bytechan: fix spelling mistake tty: serial: meson: allow baud-rates lower than 9600 serial: 8250_fintek: Fix crash with baud rate B0 serial: 8250_fintek: Disable delays for ports != 0 serial: 8250_fintek: Return -EINVAL on invalid configuration tty: Remove redundant license text tty: serdev: Remove redundant license text tty: hvc: Remove redundant license text tty: serial: Remove redundant license text tty: add SPDX identifiers to all remaining files in drivers/tty/ tty: serial: jsm: remove redundant pointer ts tty: serial: jsm: add space before the open parenthesis '(' tty: serial: jsm: fix coding style tty: serial: jsm: delete space between function name and '(' tty: serial: jsm: add blank line after declarations tty: serial: jsm: change the type of local variable tty: serial: imx: remove dead code imx_dma_rxint tty: serial: imx: disable ageing timer interrupt if dma in use serial: 8250: fix potential deadlock in rs485-mode serial: m32r_sio: Drop redundant .data assignment ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20tty/sysrq: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-04sysrq : fix Show Regs call trace on ARMJibin Xu
When kernel configuration SMP,PREEMPT and DEBUG_PREEMPT are enabled, echo 1 >/proc/sys/kernel/sysrq echo p >/proc/sysrq-trigger kernel will print call trace as below: sysrq: SysRq : Show Regs BUG: using __this_cpu_read() in preemptible [00000000] code: sh/435 caller is __this_cpu_preempt_check+0x18/0x20 Call trace: [<ffffff8008088e80>] dump_backtrace+0x0/0x1d0 [<ffffff8008089074>] show_stack+0x24/0x30 [<ffffff8008447970>] dump_stack+0x90/0xb0 [<ffffff8008463950>] check_preemption_disabled+0x100/0x108 [<ffffff8008463998>] __this_cpu_preempt_check+0x18/0x20 [<ffffff80084c9194>] sysrq_handle_showregs+0x1c/0x40 [<ffffff80084c9c7c>] __handle_sysrq+0x12c/0x1a0 [<ffffff80084ca140>] write_sysrq_trigger+0x60/0x70 [<ffffff8008251e00>] proc_reg_write+0x90/0xd0 [<ffffff80081f1788>] __vfs_write+0x48/0x90 [<ffffff80081f241c>] vfs_write+0xa4/0x190 [<ffffff80081f3354>] SyS_write+0x54/0xb0 [<ffffff80080833f0>] el0_svc_naked+0x24/0x28 This can be seen on a common board like an r-pi3. This happens because when echo p >/proc/sysrq-trigger, get_irq_regs() is called outside of IRQ context, if preemption is enabled in this situation,kernel will print the call trace. Since many prior discussions on the mailing lists have made it clear that get_irq_regs either just returns NULL or stale data when used outside of IRQ context,we simply avoid calling it outside of IRQ context. Signed-off-by: Jibin Xu <jibin.xu@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-03oom: improve oom disable handlingMichal Hocko
Tetsuo has reported that sysrq triggered OOM killer will print a misleading information when no tasks are selected: sysrq: SysRq : Manual OOM execution Out of memory: Kill process 4468 ((agetty)) score 0 or sacrifice child Killed process 4468 ((agetty)) total-vm:43704kB, anon-rss:1760kB, file-rss:0kB, shmem-rss:0kB sysrq: SysRq : Manual OOM execution Out of memory: Kill process 4469 (systemd-cgroups) score 0 or sacrifice child Killed process 4469 (systemd-cgroups) total-vm:10704kB, anon-rss:120kB, file-rss:0kB, shmem-rss:0kB sysrq: SysRq : Manual OOM execution sysrq: OOM request ignored because killer is disabled sysrq: SysRq : Manual OOM execution sysrq: OOM request ignored because killer is disabled sysrq: SysRq : Manual OOM execution sysrq: OOM request ignored because killer is disabled The real reason is that there are no eligible tasks for the OOM killer to select but since commit 7c5f64f84483 ("mm: oom: deduplicate victim selection code for memcg and global oom") the semantic of out_of_memory has changed without updating moom_callback. This patch updates moom_callback to tell that no task was eligible which is the case for both oom killer disabled and no eligible tasks. In order to help distinguish first case from the second add printk to both oom_killer_{enable,disable}. This information is useful on its own because it might help debugging potential memory allocation failures. Fixes: 7c5f64f84483 ("mm: oom: deduplicate victim selection code for memcg and global oom") Link: http://lkml.kernel.org/r/20170404134705.6361-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-04-05net: ibm: emac: remove unused sysrq handler for 'c' keyEric Biggers
Since commit d6580a9f1523 ("kexec: sysrq: simplify sysrq-c handler"), the sysrq handler for the 'c' key has been sysrq_crash_op. Debugging code in the ibm_emac driver also tries to register a handler for the 'c' key, but this has no effect because register_sysrq_key() doesn't replace existing handlers. Since evidently no one has cared enough to fix this in the last 8 years, and it's very rare for drivers to register sysrq handlers (for good reason), just remove the dead code. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-22lib/show_mem.c: teach show_mem to work with the given nodemaskMichal Hocko
show_mem() allows to filter out node specific data which is irrelevant to the allocation request via SHOW_MEM_FILTER_NODES. The filtering is done in skip_free_areas_node which skips all nodes which are not in the mems_allowed of the current process. This works most of the time as expected because the nodemask shouldn't be outside of the allocating task but there are some exceptions. E.g. memory hotplug might want to request allocations from outside of the allowed nodes (see new_node_page). Get rid of this hardcoded behavior and push the allocation mask down the show_mem path and use it instead of cpuset_current_mems_allowed. NULL nodemask is interpreted as cpuset_current_mems_allowed. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170117091543.25850-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-11sysrq: attach sysrq handler correctly for 32-bit kernelAkinobu Mita
The sysrq input handler should be attached to the input device which has a left alt key. On 32-bit kernels, some input devices which has a left alt key cannot attach sysrq handler. Because the keybit bitmap in struct input_device_id for sysrq is not correctly initialized. KEY_LEFTALT is 56 which is greater than BITS_PER_LONG on 32-bit kernels. I found this problem when using a matrix keypad device which defines a KEY_LEFTALT (56) but doesn't have a KEY_O (24 == 56%32). Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-26mm: oom: add memcg to oom_controlVladimir Davydov
It's a part of oom context just like allocation order and nodemask, so let's move it to oom_control instead of passing it in the argument list. Link: http://lkml.kernel.org/r/40e03fd7aaf1f55c75d787128d6d17c5a71226c2.1464358556.git.vdavydov@virtuozzo.com Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-29sysrq: Fix warning in sysrq generated crash.Ani Sinha
Commit 984d74a72076a1 ("sysrq: rcu-ify __handle_sysrq") replaced spin_lock_irqsave() calls with rcu_read_lock() calls in sysrq. Since rcu_read_lock() does not disable preemption, faulthandler_disabled() in __do_page_fault() in x86/fault.c returns false. When the code later calls might_sleep() in the pagefault handler, we get the following warning: BUG: sleeping function called from invalid context at ../arch/x86/mm/fault.c:1187 in_atomic(): 0, irqs_disabled(): 0, pid: 4706, name: bash Preemption disabled at:[<ffffffff81484339>] printk+0x48/0x4a To fix this, we release the RCU read lock before we crash. Tested this patch on linux 3.18 by booting off one of our boards. Fixes: 984d74a72076a1 ("sysrq: rcu-ify __handle_sysrq") Signed-off-by: Ani Sinha <ani@arista.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-10-04drivers/tty: make sysrq.c slightly more explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: config.debug:config MAGIC_SYSRQ bool "Magic SysRq key" ...meaning that it currently is not being built as a module by anyone. Lets remove the traces of modularity we can so that when reading the driver there is less doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. We don't delete the module.h include since other parts of the file are using content from there. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-08mm, oom: pass an oom order of -1 when triggered by sysrqDavid Rientjes
The force_kill member of struct oom_control isn't needed if an order of -1 is used instead. This is the same as order == -1 in struct compact_control which requires full memory compaction. This patch introduces no functional change. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08mm, oom: organize oom context into structDavid Rientjes
There are essential elements to an oom context that are passed around to multiple functions. Organize these elements into a new struct, struct oom_control, that specifies the context for an oom condition. This patch introduces no functional change. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-01Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Main excitement here is Peter Zijlstra's lockless rbtree optimization to speed module address lookup. He found some abusers of the module lock doing that too. A little bit of parameter work here too; including Dan Streetman's breaking up the big param mutex so writing a parameter can load another module (yeah, really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were appended too" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits) modules: only use mod->param_lock if CONFIG_MODULES param: fix module param locks when !CONFIG_SYSFS. rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE() module: add per-module param_lock module: make perm const params: suppress unused variable error, warn once just in case code changes. modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'. kernel/module.c: avoid ifdefs for sig_enforce declaration kernel/workqueue.c: remove ifdefs over wq_power_efficient kernel/params.c: export param_ops_bool_enable_only kernel/params.c: generalize bool_enable_only kernel/module.c: use generic module param operaters for sig_enforce kernel/params: constify struct kernel_param_ops uses sysfs: tightened sysfs permission checks module: Rework module_addr_{min,max} module: Use __module_address() for module_address_lookup() module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING module: Optimize __module_address() using a latched RB-tree rbtree: Implement generic latch_tree seqlock: Introduce raw_read_seqcount_latch() ...