summaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)Author
2018-11-10Merge tag 'tty-4.20-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty fixes for 4.20-rc2 One of these missed the original 4.19-final release, I missed that I hadn't done a pull request for it as it was in linux-next and my branch for a long time, that's my fault. The others are small, fixing some reported issues and finally fixing the termios mess for alpha so that glibc has a chance to implement some missing functionality that has been pending for many years now. All of these have been in linux-next with no reported issues" * tag 'tty-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeout arch/alpha, termios: implement BOTHER, IBSHIFT and termios2 termios, tty/tty_baudrate.c: fix buffer overrun vt: fix broken display when running aptitude serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMA
2018-11-09serial: sh-sci: Fix could not remove dev_attr_rx_fifo_timeoutYoshihiro Shimoda
This patch fixes an issue that the sci_remove() could not remove dev_attr_rx_fifo_timeout because uart_remove_one_port() set the port->port.type to PORT_UNKNOWN. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Fixes: 5d23188a473d ("serial: sh-sci: make RX FIFO parameters tunable via sysfs") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-08termios, tty/tty_baudrate.c: fix buffer overrunH. Peter Anvin
On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does not do any limit checking on the tty_baudrate[] array, and in fact a buffer overrun is possible on both architectures. Add a limit check to prevent that situation. This will be followed by a much bigger cleanup/simplification patch. Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com> Requested-by: Cc: Johan Hovold <johan@kernel.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-08vt: fix broken display when running aptitudeMikulas Patocka
If you run aptitude on framebuffer console, the display is corrupted. The corruption is caused by the commit d8ae7242. The patch adds "offset" to "start" when calling scr_memsetw, but it forgets to do the same addition on a subsequent call to do_update_region. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: d8ae72427187 ("vt: preserve unicode values corresponding to screen characters") Reviewed-by: Nicolas Pitre <nico@linaro.org> Cc: stable@vger.kernel.org # 4.19 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-29Merge tag 'tty-4.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big tty and serial pull request for 4.20-rc1 Lots of little things here, including a merge from the SPI tree in order to keep things simpler for everyone to sync around for one platform. Major stuff is: - tty buffer clearing after use - atmel_serial fixes and additions - xilinx uart driver updates and of course, lots of tiny fixes and additions to individual serial drivers. All of these have been in linux-next with no reported issues for a while" * tag 'tty-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits) of: base: Change logic in of_alias_get_alias_list() of: base: Fix english spelling in of_alias_get_alias_list() serial: sh-sci: do not warn if DMA transfers are not supported serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES tty: check name length in tty_find_polling_driver() serial: sh-sci: Add r8a77990 support tty: wipe buffer if not echoing data tty: wipe buffer. serial: fsl_lpuart: Remove the alias node dependence TTY: sn_console: Replace spin_is_locked() with spin_trylock() Revert "serial:serial_core: Allow use of CTS for PPS line discipline" serial: 8250_uniphier: add auto-flow-control support serial: 8250_uniphier: flatten probe function serial: 8250_uniphier: remove unused "fifo-size" property dt-bindings: serial: sh-sci: Document r8a7744 bindings serial: uartps: Fix missing unlock on error in cdns_get_id() tty/serial: atmel: add ISO7816 support tty/serial_core: add ISO7816 infrastructure serial:serial_core: Allow use of CTS for PPS line discipline serial: docs: Fix filename for serial reference implementation ...
2018-10-28Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "This is going to rebuild more than drm as it adds a new helper to list.h for doing bulk updates. Seemed like a reasonable addition to me. Otherwise the usual merge window stuff lots of i915 and amdgpu, not so much nouveau, and piles of everything else. Core: - Adds a new list.h helper for doing bulk list updates for TTM. - Don't leak fb address in smem_start to userspace (comes with EXPORT workaround for people using mali out of tree hacks) - udmabuf device to turn memfd regions into dma-buf - Per-plane blend mode property - ref/unref replacements with get/put - fbdev conflicting framebuffers code cleaned up - host-endian format variants - panel orientation quirk for Acer One 10 bridge: - TI SN65DSI86 chip support vkms: - GEM support. - Cursor support amdgpu: - Merge amdkfd and amdgpu into one module - CEC over DP AUX support - Picasso APU support + VCN dynamic powergating - Raven2 APU support - Vega20 enablement + kfd support - ACP powergating improvements - ABGR/XBGR display support - VCN jpeg support - xGMI support - DC i2c/aux cleanup - Ycbcr 4:2:0 support - GPUVM improvements - Powerplay and powerplay endian fixes - Display underflow fixes vmwgfx: - Move vmwgfx specific TTM code to vmwgfx - Split out vmwgfx buffer/resource validation code - Atomic operation rework bochs: - use more helpers - format/byteorder improvements qxl: - use more helpers i915: - GGTT coherency getparam - Turn off resource streamer API - More Icelake enablement + DMC firmware - Full PPGTT for Ivybridge, Haswell and Valleyview - DDB distribution based on resolution - Limited range DP display support nouveau: - CEC over DP AUX support - Initial HDMI 2.0 support virtio-gpu: - vmap support for PRIME objects tegra: - Initial Tegra194 support - DMA/IOMMU integration fixes msm: - a6xx perf improvements + clock prefix - GPU preemption optimisations - a6xx devfreq support - cursor support rockchip: - PX30 support - rgb output interface support mediatek: - HDMI output support on mt2701 and mt7623 rcar-du: - Interlaced modes on Gen3 - LVDS on R8A77980 - D3 and E3 SoC support hisilicon: - misc fixes mxsfb: - runtime pm support sun4i: - R40 TCON support - Allwinner A64 support - R40 HDMI support omapdrm: - Driver rework changing display pipeline ordering to use common code - DMM memory barrier and irq fixes - Errata workarounds exynos: - out-bridge support for LVDS bridge driver - Samsung 16x16 tiled format support - Plane alpha and pixel blend mode support tilcdc: - suspend/resume update mali-dp: - misc updates" * tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits) firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake. drm/i915/icl: Fix signal_levels drm/i915/icl: Fix DDI/TC port clk_off bits drm/i915/icl: create function to identify combophy port drm/i915/gen9+: Fix initial readout for Y tiled framebuffers drm/i915: Large page offsets for pread/pwrite drm/i915/selftests: Disable shrinker across mmap-exhaustion drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode drm/i915: Fix intel_dp_mst_best_encoder() drm/i915: Skip vcpi allocation for MSTB ports that are gone drm/i915: Don't unset intel_connector->mst_port drm/i915: Only reset seqno if actually idle drm/i915: Use the correct crtc when sanitizing plane mapping drm/i915: Restore vblank interrupts earlier drm/i915: Check fb stride against plane max stride drm/amdgpu/vcn:Fix uninitialized symbol error drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003) drm/amd/amdgpu: Fix debugfs error handling drm/amdgpu: Update gc_9_0 golden settings. drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields ...
2018-10-25Merge tag 'mfd-next-4.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - Add support for USART SPI to AT91* New Functionality - Add support for Audio CODECs to motorola-cpcap Fix-ups - DT documentation fix-ups; atmel-usart - Staticise functions/structs; spi-at91-usart, arizona-core - Constify; ti-lmu - Fix memory leaks; menelaus - Change device 'wake-up' status; ti_am335x_tscadc, max8997 - Power Management (suspend/resume) semantic changes; ti_am335x_adc, cros_ec, max8997 - SPDX churn; sec-core (+ headers), max* (+ headers), intel* (+ headers), - Trivial (whitespace, email addresses, alphabetisise); Kconfig, adp5520, intel_soc_pmic_* - Build as module; sec-irq - Use new %pOFn printk format for device_node.name; max77620 - Remove unused code; madera - Use generic MACROs; intel_msic, intel_soc_pmic_crc - Move to GPIOD; ti-lmu - Use managed resources; ti-lmu Bug Fixes - Add missing headers; at91-usart - Prevent device from entering low-power mode; arizona-core - Poll for BOOT_DONE to avoid still-booting NACK; madera-core - Prevent ADC read from shutting down device; mc13xxx-core" * tag 'mfd-next-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: cros_ec: Avoid unneeded internal declaration warning mfd: ti-lmu: Use of_device_get_match_data() helper mfd: ti-lmu: Use managed resource for everything mfd: ti-lmu: Switch to GPIOD mfd: ti-lmu: constify mfd_cell tables mfd: max8997: Disable interrupt handling for suspend/resume cycle mfd: max8997: Enale irq-wakeup unconditionally mfd: arizona: Make array mclk_name static, shrinks object size MAINTAINERS: Add myself as designated reviewer of Intel MFD PMIC mfd: Convert Intel PMIC drivers to use SPDX identifier 1;5201;0c Reduce size of duplicated comments by switching to use SPDX identifier. mfd: Sort headers alphabetically for Intel PMIC drivers mfd: intel_soc_pmic_bxtwc: Chain power button IRQs as well mfd: intel_soc_pmic_crc: Use REGMAP_IRQ_REG() macro mfd: intel_soc_pmic_crc: Use DEFINE_RES_IRQ_NAMED() macro mfd: intel_msic: Use DEFINE_RES_IRQ() macro mfd: motorola-cpcap: Add audio-codec support mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values mfd: madera: Remove unused forward reference mfd: max77620: Convert to using %pOFn instead of device_node.name mfd: madera: Don't use regmap_read_poll_timeout to poll for BOOT_DONE ...
2018-10-24Merge branch 'work.tty-ioctl' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull tty ioctl updates from Al Viro: "This is the compat_ioctl work related to tty ioctls. Quite a bit of dead code taken out, all tty-related stuff gone from fs/compat_ioctl.c. A bunch of compat bugs fixed - some still remain, but all more or less generic tty-related ioctls should be covered (remaining issues are in things like driver-private ioctls in a pcmcia serial card driver not getting properly handled in 32bit processes on 64bit host, etc)" * 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (53 commits) kill TIOCSERGSTRUCT change semantics of ldisc ->compat_ioctl() kill TIOCSER[SG]WILD synclink_gt(): fix compat_ioctl() pty: fix compat ioctls compat_ioctl - kill keyboard ioctl handling gigaset: add ->compat_ioctl() vt_compat_ioctl(): clean up, use compat_ptr() properly gigaset: don't try to printk userland buffer contents dgnc: don't bother with (empty) stub for TCXONC dgnc: leave TIOC[GS]SOFTCAR to ldisc remove fallback to drivers for TIOCGICOUNT dgnc: break-related ioctls won't reach ->ioctl() kill the rest of tty COMPAT_IOCTL() entries dgnc: TIOCM... won't reach ->ioctl() isdn_tty: TCSBRK{,P} won't reach ->ioctl() kill capinc_tty_ioctl() take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl() synclink: reduce pointless checks in ->ioctl() complete ->[sg]et_serial() switchover ...
2018-10-24Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo updates from Eric Biederman: "I have been slowly sorting out siginfo and this is the culmination of that work. The primary result is in several ways the signal infrastructure has been made less error prone. The code has been updated so that manually specifying SEND_SIG_FORCED is never necessary. The conversion to the new siginfo sending functions is now complete, which makes it difficult to send a signal without filling in the proper siginfo fields. At the tail end of the patchset comes the optimization of decreasing the size of struct siginfo in the kernel from 128 bytes to about 48 bytes on 64bit. The fundamental observation that enables this is by definition none of the known ways to use struct siginfo uses the extra bytes. This comes at the cost of a small user space observable difference. For the rare case of siginfo being injected into the kernel only what can be copied into kernel_siginfo is delivered to the destination, the rest of the bytes are set to 0. For cases where the signal and the si_code are known this is safe, because we know those bytes are not used. For cases where the signal and si_code combination is unknown the bits that won't fit into struct kernel_siginfo are tested to verify they are zero, and the send fails if they are not. I made an extensive search through userspace code and I could not find anything that would break because of the above change. If it turns out I did break something it will take just the revert of a single change to restore kernel_siginfo to the same size as userspace siginfo. Testing did reveal dependencies on preferring the signo passed to sigqueueinfo over si->signo, so bit the bullet and added the complexity necessary to handle that case. Testing also revealed bad things can happen if a negative signal number is passed into the system calls. Something no sane application will do but something a malicious program or a fuzzer might do. So I have fixed the code that performs the bounds checks to ensure negative signal numbers are handled" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits) signal: Guard against negative signal numbers in copy_siginfo_from_user32 signal: Guard against negative signal numbers in copy_siginfo_from_user signal: In sigqueueinfo prefer sig not si_signo signal: Use a smaller struct siginfo in the kernel signal: Distinguish between kernel_siginfo and siginfo signal: Introduce copy_siginfo_from_user and use it's return value signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE signal: Fail sigqueueinfo if si_signo != sig signal/sparc: Move EMT_TAGOVF into the generic siginfo.h signal/unicore32: Use force_sig_fault where appropriate signal/unicore32: Generate siginfo in ucs32_notify_die signal/unicore32: Use send_sig_fault where appropriate signal/arc: Use force_sig_fault where appropriate signal/arc: Push siginfo generation into unhandled_exception signal/ia64: Use force_sig_fault where appropriate signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn signal/ia64: Use the generic force_sigsegv in setup_frame signal/arm/kvm: Use send_sig_mceerr signal/arm: Use send_sig_fault where appropriate signal/arm: Use force_sig_fault where appropriate ...
2018-10-23Merge tag 'gpio-v4.20-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.20 series: Core changes: - A patch series from Hans Verkuil to make it possible to enable/disable IRQs on a GPIO line at runtime and drive GPIO lines as output without having to put/get them from scratch. The irqchip callbacks have been improved so that they can use only the fastpatch callbacks to enable/disable irqs like any normal irqchip, especially the gpiod_lock_as_irq() has been improved to be callable in fastpath context. A bunch of rework had to be done to achieve this but it is a big win since I never liked to restrict this to slowpath. The only call requireing slowpath was try_module_get() and this is kept at the .request_resources() slowpath callback. In the GPIO CEC driver this is a big win sine a single line is used for both outgoing and incoming traffic, and this needs to use IRQs for incoming traffic while actively driving the line for outgoing traffic. - Janusz Krzysztofik improved the GPIO array API to pass a "cookie" (struct gpio_array) and a bitmap for setting or getting multiple GPIO lines at once. This improvement orginated in a specific need to speed up an OMAP1 driver and has led to a much better API and real performance gains when the state of the array can be used to bypass a lot of checks and code when we want things to go really fast. The previous code would minimize the number of calls down to the driver callbacks assuming the CPU speed was orders of magnitude faster than the I/O latency, but this assumption was wrong on several platforms: what we needed to do was to profile and improve the speed on the hot path of the array functions and this change is now completed. - Clean out the painful and hard to grasp BNF experiments from the device tree bindings. Future approaches are looking into using JSON schema for this purpose. (Rob Herring is floating a patch series.) New drivers: - The RCAR driver now supports r8a774a1 (RZ/G2M). - Synopsys GPIO via CREGs driver. Major improvements: - Modernization of the EP93xx driver to use irqdomain and other contemporary concepts. - The ingenic driver has been merged into the Ingenic pin control driver and removed from the GPIO subsystem. - Debounce support in the ftgpio010 driver" * tag 'gpio-v4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (116 commits) gpio: Clarify kerneldoc on gpiochip_set_chained_irqchip() gpio: Remove unused 'irqchip' argument to gpiochip_set_cascaded_irqchip() gpio: Drop parent irq assignment during cascade setup mmc: pwrseq_simple: Fix incorrect handling of GPIO bitmap gpio: fix SNPS_CREG kconfig dependency warning gpiolib: Initialize gdev field before is used gpio: fix kernel-doc after devres.c file rename gpio: fix doc string for devm_gpiochip_add_data() to not talk about irq_chip gpio: syscon: Fix possible NULL ptr usage gpiolib: Show correct direction from the beginning pinctrl: msm: Use init_valid_mask exported function gpiolib: Add init_valid_mask exported function GPIO: add single-register GPIO via CREG driver dt-bindings: Document the Synopsys GPIO via CREG bindings gpio: mockup: use device properties instead of platform_data gpio: Slightly more helpful debugfs gpio: omap: Remove set but not used variable 'dev' gpio: omap: drop omap_gpio_list Accept partial 'gpio-line-names' property. gpio: omap: get rid of the conditional PM runtime calls ...
2018-10-15serial: sh-sci: Fix receive on SCIFA/SCIFB variants with DMAGeert Uytterhoeven
On SCIFA and SCIFB serial ports with DMA support (i.e. some ports on R-Car Gen2 and RZ/G1 SoCs), receive DMA operations are submitted before the DMA channel pointer is initialized. Hence this fails, and the driver tries to fall back to PIO. However, at this early phase in the initialization sequence, fallback to PIO does not work, leading to a serial port that cannot receive any data. Fix this by calling sci_submit_rx() after initialization of the DMA channel pointer. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 2c4ee23530ffc022 ("serial: sh-sci: Postpone DMA release when falling back to PIO") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15of: base: Change logic in of_alias_get_alias_list()Michal Simek
Check compatible string first before setting up bit in bitmap to also cover cases that allocated bitfield is not big enough. Show warning about it but let driver to continue to work with allocated bitfield to keep at least some devices (included console which is commonly close to serial0) to work. Fixes: b1078c355d76 ("of: base: Introduce of_alias_get_alias_list() to check alias IDs") Fixes: ae1cca3fa347 ("serial: uartps: Change uart ID port allocation") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-15serial: sh-sci: do not warn if DMA transfers are not supportedUlrich Hecht
Not all (H)SCIF devices support DMA, and failure to set it up is not normally a cause for concern. This patch demotes the associated warning to debug output. Inspired by BSP patch "sci: sh-sci: Fix transfer sequence of unsupport DMA transfer" (6beb1f98d3bd30) by Hiromitsu Yamasaki. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13kill TIOCSERGSTRUCTAl Viro
Once upon a time a bunch of serial drivers used to provide that; today it's only amiserial and it's FUBAR - the structure being copied to userland includes kernel pointers, fields with config-dependent size, etc. No userland code using it could possibly survive - e.g. enabling lockdep definitely changes the layout. Besides, it's a massive infoleak. Kill it. If somebody needs that data for debugging purposes, they can bloody well expose it saner ways. Assuming anyone does debugging of amiserial in the first place, that is. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13change semantics of ldisc ->compat_ioctl()Al Viro
First of all, make it return int. Returning long when native method had never allowed that is ridiculous and inconvenient. More importantly, change the caller; if ldisc ->compat_ioctl() is NULL or returns -ENOIOCTLCMD, tty_compat_ioctl() will try to feed cmd and compat_ptr(arg) to ldisc's native ->ioctl(). That simplifies ->compat_ioctl() instances quite a bit - they only need to deal with ioctls that are neither generic tty ones (those would get shunted off to tty_ioctl()) nor simple compat pointer ones. Note that something like TCFLSH won't reach ->compat_ioctl(), even if ldisc ->ioctl() does handle it - it will be recognized earlier and passed to tty_ioctl() (and ultimately - ldisc ->ioctl()). For many ldiscs it means that NULL ->compat_ioctl() does the right thing. Those where it won't serve (see e.g. n_r3964.c) are also easily dealt with - we need to handle the numeric-argument ioctls (calling the native instance) and, if such would exist, the ioctls that need layout conversion, etc. All in-tree ldiscs dealt with. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13kill TIOCSER[SG]WILDAl Viro
the only user is very old setserial rc script and even that (as far back as MCC Interim, AFAICS) doesn't actually fail - just gives one message during the boot ("Cannot scan for wild interrupts") and proceeds past that just fine. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13synclink_gt(): fix compat_ioctl()Al Viro
compat_ptr() for pointer-taking ones... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13pty: fix compat ioctlsAl Viro
pointer-taking ones need compat_ptr(); int-taking one doesn't. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13vt_compat_ioctl(): clean up, use compat_ptr() properlyAl Viro
we need it for "convert the structure" cases too Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13remove fallback to drivers for TIOCGICOUNTAl Viro
none of them handles it anyway. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13synclink: reduce pointless checks in ->ioctl()Al Viro
it's never getting called with TIOC[SG]SERIAL anymore (nor has it ever supported those, while we are at it) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13complete ->[sg]et_serial() switchoverAl Viro
Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13serial_core: switch to ->[sg]et_serial()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13mxser: switch to ->[sg]et_serial()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13moxa: switch to ->[sg]et_serial()Al Viro
Pointless dead assignments in moxa_set_serial_info() killed off; they would've been a bug, if not for the fact that user-settable flags had never been used in that driver. Bogus from day 1, though... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13isicom: switch to ->[sg]et_serial()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13ipwireless: switch to ->[sg]et_serial()Al Viro
Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13cyclades: switch to ->[sg]et_serial()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-13amiserial: switch to ->[sg]et_serial()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-10-11serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCESMichal Simek
Aliases >= MAX_UART_INSTANCES is no problem to find out and use but in error path is necessary skip clearing bits in bitmap to ensure that only bits in allocated bitmap are handled and nothing beyond that. Without this patch when for example serial90 alias is used then in error patch bit 90 is clear in 32bit wide bitmap. Fixes: ae1cca3fa347 ("serial: uartps: Change uart ID port allocation") Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11tty: check name length in tty_find_polling_driver()Miles Chen
The issue is found by a fuzzing test. If tty_find_polling_driver() recevies an incorrect input such as ',,' or '0b', the len becomes 0 and strncmp() always return 0. In this case, a null p->ops->poll_init() is called and it causes a kernel panic. Fix this by checking name length against zero in tty_find_polling_driver(). $echo ,, > /sys/module/kgdboc/parameters/kgdboc [ 20.804451] WARNING: CPU: 1 PID: 104 at drivers/tty/serial/serial_core.c:457 uart_get_baud_rate+0xe8/0x190 [ 20.804917] Modules linked in: [ 20.805317] CPU: 1 PID: 104 Comm: sh Not tainted 4.19.0-rc7ajb #8 [ 20.805469] Hardware name: linux,dummy-virt (DT) [ 20.805732] pstate: 20000005 (nzCv daif -PAN -UAO) [ 20.805895] pc : uart_get_baud_rate+0xe8/0x190 [ 20.806042] lr : uart_get_baud_rate+0xc0/0x190 [ 20.806476] sp : ffffffc06acff940 [ 20.806676] x29: ffffffc06acff940 x28: 0000000000002580 [ 20.806977] x27: 0000000000009600 x26: 0000000000009600 [ 20.807231] x25: ffffffc06acffad0 x24: 00000000ffffeff0 [ 20.807576] x23: 0000000000000001 x22: 0000000000000000 [ 20.807807] x21: 0000000000000001 x20: 0000000000000000 [ 20.808049] x19: ffffffc06acffac8 x18: 0000000000000000 [ 20.808277] x17: 0000000000000000 x16: 0000000000000000 [ 20.808520] x15: ffffffffffffffff x14: ffffffff00000000 [ 20.808757] x13: ffffffffffffffff x12: 0000000000000001 [ 20.809011] x11: 0101010101010101 x10: ffffff880d59ff5f [ 20.809292] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3 [ 20.809549] x7 : 0000000000000000 x6 : ffffff880d59ff5f [ 20.809803] x5 : 0000000080008001 x4 : 0000000000000003 [ 20.810056] x3 : ffffff900853e6b4 x2 : dfffff9000000000 [ 20.810693] x1 : ffffffc06acffad0 x0 : 0000000000000cb0 [ 20.811005] Call trace: [ 20.811214] uart_get_baud_rate+0xe8/0x190 [ 20.811479] serial8250_do_set_termios+0xe0/0x6f4 [ 20.811719] serial8250_set_termios+0x48/0x54 [ 20.811928] uart_set_options+0x138/0x1bc [ 20.812129] uart_poll_init+0x114/0x16c [ 20.812330] tty_find_polling_driver+0x158/0x200 [ 20.812545] configure_kgdboc+0xbc/0x1bc [ 20.812745] param_set_kgdboc_var+0xb8/0x150 [ 20.812960] param_attr_store+0xbc/0x150 [ 20.813160] module_attr_store+0x40/0x58 [ 20.813364] sysfs_kf_write+0x8c/0xa8 [ 20.813563] kernfs_fop_write+0x154/0x290 [ 20.813764] vfs_write+0xf0/0x278 [ 20.813951] __arm64_sys_write+0x84/0xf4 [ 20.814400] el0_svc_common+0xf4/0x1dc [ 20.814616] el0_svc_handler+0x98/0xbc [ 20.814804] el0_svc+0x8/0xc [ 20.822005] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 20.826913] Mem abort info: [ 20.827103] ESR = 0x84000006 [ 20.827352] Exception class = IABT (current EL), IL = 16 bits [ 20.827655] SET = 0, FnV = 0 [ 20.827855] EA = 0, S1PTW = 0 [ 20.828135] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____) [ 20.828484] [0000000000000000] pgd=00000000aadee003, pud=00000000aadee003, pmd=0000000000000000 [ 20.829195] Internal error: Oops: 84000006 [#1] SMP [ 20.829564] Modules linked in: [ 20.829890] CPU: 1 PID: 104 Comm: sh Tainted: G W 4.19.0-rc7ajb #8 [ 20.830545] Hardware name: linux,dummy-virt (DT) [ 20.830829] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 20.831174] pc : (null) [ 20.831457] lr : serial8250_do_set_termios+0x358/0x6f4 [ 20.831727] sp : ffffffc06acff9b0 [ 20.831936] x29: ffffffc06acff9b0 x28: ffffff9008d7c000 [ 20.832267] x27: ffffff900969e16f x26: 0000000000000000 [ 20.832589] x25: ffffff900969dfb0 x24: 0000000000000000 [ 20.832906] x23: ffffffc06acffad0 x22: ffffff900969e160 [ 20.833232] x21: 0000000000000000 x20: ffffffc06acffac8 [ 20.833559] x19: ffffff900969df90 x18: 0000000000000000 [ 20.833878] x17: 0000000000000000 x16: 0000000000000000 [ 20.834491] x15: ffffffffffffffff x14: ffffffff00000000 [ 20.834821] x13: ffffffffffffffff x12: 0000000000000001 [ 20.835143] x11: 0101010101010101 x10: ffffff880d59ff5f [ 20.835467] x9 : ffffff880d59ff5e x8 : ffffffc06acffaf3 [ 20.835790] x7 : 0000000000000000 x6 : ffffff880d59ff5f [ 20.836111] x5 : c06419717c314100 x4 : 0000000000000007 [ 20.836419] x3 : 0000000000000000 x2 : 0000000000000000 [ 20.836732] x1 : 0000000000000001 x0 : ffffff900969df90 [ 20.837100] Process sh (pid: 104, stack limit = 0x(____ptrval____)) [ 20.837396] Call trace: [ 20.837566] (null) [ 20.837816] serial8250_set_termios+0x48/0x54 [ 20.838089] uart_set_options+0x138/0x1bc [ 20.838570] uart_poll_init+0x114/0x16c [ 20.838834] tty_find_polling_driver+0x158/0x200 [ 20.839119] configure_kgdboc+0xbc/0x1bc [ 20.839380] param_set_kgdboc_var+0xb8/0x150 [ 20.839658] param_attr_store+0xbc/0x150 [ 20.839920] module_attr_store+0x40/0x58 [ 20.840183] sysfs_kf_write+0x8c/0xa8 [ 20.840183] sysfs_kf_write+0x8c/0xa8 [ 20.840440] kernfs_fop_write+0x154/0x290 [ 20.840702] vfs_write+0xf0/0x278 [ 20.840942] __arm64_sys_write+0x84/0xf4 [ 20.841209] el0_svc_common+0xf4/0x1dc [ 20.841471] el0_svc_handler+0x98/0xbc [ 20.841713] el0_svc+0x8/0xc [ 20.842057] Code: bad PC value [ 20.842764] ---[ end trace a8835d7de79aaadf ]--- [ 20.843134] Kernel panic - not syncing: Fatal exception [ 20.843515] SMP: stopping secondary CPUs [ 20.844289] Kernel Offset: disabled [ 20.844634] CPU features: 0x0,21806002 [ 20.844857] Memory Limit: none [ 20.845172] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11tty: wipe buffer if not echoing dataGreg KH
If we are not echoing the data to userspace or the console is in icanon mode, then perhaps it is a "secret" so we should wipe it once we are done with it. This mirrors the logic that the audit code has. Reported-by: aszlig <aszlig@nix.build> Tested-by: Milan Broz <gmazyland@gmail.com> Tested-by: Daniel Zatovic <daniel.zatovic@gmail.com> Tested-by: aszlig <aszlig@nix.build> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11tty: wipe buffer.Linus Torvalds
After we are done with the tty buffer, zero it out. Reported-by: aszlig <aszlig@nix.build> Tested-by: Milan Broz <gmazyland@gmail.com> Tested-by: Daniel Zatovic <daniel.zatovic@gmail.com> Tested-by: aszlig <aszlig@nix.build> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-11Merge tag 'alloc-args-v4.19-rc8' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Kees writes: "Fix open-coded multiplication arguments to allocators - Fixes several new open-coded multiplications added in the 4.19 merge window." * tag 'alloc-args-v4.19-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Replace more open-coded allocation size multiplications
2018-10-10serial: fsl_lpuart: Remove the alias node dependenceVabhav Sharma
Numbering the ttyLPn space should not depend on the generic name "serial<n>". If don't add the alias node like:"serial0 = &lpuart0;", then lpuart will probe failed: [ 0.773410] fsl-lpuart 2950000.serial: failed to get alias id, errno -19 So remove the alias node dependence, and add the support for allocate the line port automatically. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-08Merge 4.19-rc7 into tty-nextGreg Kroah-Hartman
We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-05treewide: Replace more open-coded allocation size multiplicationsKees Cook
As done treewide earlier, this catches several more open-coded allocation size calculations that were added to the kernel during the merge window. This performs the following mechanical transformations using Coccinelle: kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...) kvzalloc(a * b, ...) -> kvcalloc(a, b, ...) devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-10-04TTY: sn_console: Replace spin_is_locked() with spin_trylock()Lance Roy
sn_sal_console_write() used spin_is_locked() + spin_lock() to get achieve the same thing as a spin_trylock(), so simplify it by using that instead. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Lance Roy <ldr709@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: <linux-serial@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04Revert "serial:serial_core: Allow use of CTS for PPS line discipline"Greg Kroah-Hartman
This reverts commit c550f01c810f2197c98e6e3103f81797f5e063be. Turns out the samsung tty driver is mucking around in the "unused" port fields and this patch breaks that code :( So we need to fix that driver up before this can be accepted. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steve Sakoman <steve@sakoman.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-04BackMerge v4.19-rc6 into drm-nextDave Airlie
I have some pulls based on rc6, and I prefer to have an explicit backmerge. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-10-02Revert "serial: sh-sci: Allow for compressed SCIF address"Geert Uytterhoeven
This reverts commit 2d4dd0da45401c7ae7332b4d1eb7bbb1348edde9. This broke earlycon on all Renesas ARM platforms using a SCIF port for the serial console (R-Car, RZ/A1, RZ/G1, RZ/G2 SoCs), due to an incorrect value of port->regshift. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE"Geert Uytterhoeven
This reverts commit 7acece71a517cad83a0842a94d94c13f271b680c. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02Revert "serial: 8250_dw: Fix runtime PM handling"Guenter Roeck
This reverts commit d76c74387e1c978b6c5524a146ab0f3f72206f98. While commit d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling") fixes runtime PM handling when using kgdb, it introduces a traceback for everyone else. BUG: sleeping function called from invalid context at /mnt/host/source/src/third_party/kernel/next/drivers/base/power/runtime.c:1034 in_atomic(): 1, irqs_disabled(): 1, pid: 1, name: swapper/0 7 locks held by swapper/0/1: #0: 000000005ec5bc72 (&dev->mutex){....}, at: __driver_attach+0xb5/0x12b #1: 000000005d5fa9e5 (&dev->mutex){....}, at: __device_attach+0x3e/0x15b #2: 0000000047e93286 (serial_mutex){+.+.}, at: serial8250_register_8250_port+0x51/0x8bb #3: 000000003b328f07 (port_mutex){+.+.}, at: uart_add_one_port+0xab/0x8b0 #4: 00000000fa313d4d (&port->mutex){+.+.}, at: uart_add_one_port+0xcc/0x8b0 #5: 00000000090983ca (console_lock){+.+.}, at: vprintk_emit+0xdb/0x217 #6: 00000000c743e583 (console_owner){-...}, at: console_unlock+0x211/0x60f irq event stamp: 735222 __down_trylock_console_sem+0x4a/0x84 console_unlock+0x338/0x60f __do_softirq+0x4a4/0x50d irq_exit+0x64/0xe2 CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5 #6 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.286.0 03/15/2017 Call Trace: dump_stack+0x7d/0xbd ___might_sleep+0x238/0x259 __pm_runtime_resume+0x4e/0xa4 ? serial8250_rpm_get+0x2e/0x44 serial8250_console_write+0x44/0x301 ? lock_acquire+0x1b8/0x1fa console_unlock+0x577/0x60f vprintk_emit+0x1f0/0x217 printk+0x52/0x6e register_console+0x43b/0x524 uart_add_one_port+0x672/0x8b0 ? set_io_from_upio+0x150/0x162 serial8250_register_8250_port+0x825/0x8bb dw8250_probe+0x80c/0x8b0 ? dw8250_serial_inq+0x8e/0x8e ? dw8250_check_lcr+0x108/0x108 ? dw8250_runtime_resume+0x5b/0x5b ? dw8250_serial_outq+0xa1/0xa1 ? dw8250_remove+0x115/0x115 platform_drv_probe+0x76/0xc5 really_probe+0x1f1/0x3ee ? driver_allows_async_probing+0x5d/0x5d driver_probe_device+0xd6/0x112 ? driver_allows_async_probing+0x5d/0x5d bus_for_each_drv+0xbe/0xe5 __device_attach+0xdd/0x15b bus_probe_device+0x5a/0x10b device_add+0x501/0x894 ? _raw_write_unlock+0x27/0x3a platform_device_add+0x224/0x2b7 mfd_add_device+0x718/0x75b ? __kmalloc+0x144/0x16a ? mfd_add_devices+0x38/0xdb mfd_add_devices+0x9b/0xdb intel_lpss_probe+0x7d4/0x8ee intel_lpss_pci_probe+0xac/0xd4 pci_device_probe+0x101/0x18e ... Revert the offending patch until a more comprehensive solution is available. Cc: Tony Lindgren <tony@atomide.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Phil Edworthy <phil.edworthy@renesas.com> Fixes: d76c74387e1c ("serial: 8250_dw: Fix runtime PM handling") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02serial: 8250_uniphier: add auto-flow-control supportDai Okamura
Add selective auto-flow-control support for UniPhier serial driver. Signed-off-by: Dai Okamura <okamura.dai@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02serial: 8250_uniphier: flatten probe functionMasahiro Yamada
Currently, the DT-related settings are split out to uniphier_of_serial_setup(), but it turned out to be not nice. The next commit will add a DT property, but it will not fit in the helper. Merge the helper into the probe function. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02serial: 8250_uniphier: remove unused "fifo-size" propertyMasahiro Yamada
The FIFO size of the UART devices is 64 on almost all UniPhier SoCs with the exception Pro4TV SoC (MN2WS0235), which used 128 FIFO size. However, Pro4TV SoC was never upstreamed, and out of production. So, this property has never been used in a useful way. Let's remove old unused code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02serial: uartps: Fix missing unlock on error in cdns_get_id()Wei Yongjun
Add the missing unlock before return from function cdns_get_id() in the error handling case. Fixes: ae1cca3fa347 ("serial: uartps: Change uart ID port allocation") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-02tty/serial: atmel: add ISO7816 supportNicolas Ferre
When mode is set in atmel_config_iso7816() we backup last RS232 mode for coming back to this mode if requested. Also allow setup of T=0 and T=1 parameter and basic support in set_termios function as well. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> [ludovic.desroches@microchip.com: rebase, add check on fidi ratio, checkpatch fixes] Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>