| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit aafe93516b8567ab5864e1f4cd3eeabc54fb0e5a ]
Every time the hub signals a reset while we (device) are hsotg->connected,
dwc2_hsotg_core_init_disconnected() is called, which in turn calls
dwc2_hs_phy_init().
GUSBCFG.USBTrdTim is cleared upon Core Soft Reset, so if
hsotg->params.phy_utmi_width is 8-bit, the value of GUSBCFG.USBTrdTim (the
default one: 0x5, corresponding to 16-bit) is always different from
hsotg->params.phy_utmi_width, thus dwc2_core_reset() is called every
time (usbcfg != usbcfg_old), which causes 2 issues:
1) The call to dwc2_core_reset() does another reset 300us after the initial
Chirp K of the first reset (which should last at least Tuch = 1ms), and
messes up the High-speed Detection Handshake: both hub and device drive
current into the D+ and D- lines at the same time.
2) GUSBCFG.USBTrdTim is cleared by the second reset, so its value is always
the default one (0x5).
Setting GUSBCFG.USBTrdTim after the potential call to dwc2_core_reset()
fixes both issues. It is now set even when select_phy is false because the
cost of the Core Soft Reset is removed.
Fixes: 1e868545f2bb ("usb: dwc2: gadget: Move gadget phy init into core phy init")
Signed-off-by: Clément Lassieur <clement@lassieur.org>
Link: https://lore.kernel.org/r/20210603155921.940651-1-clement@lassieur.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ecfbd7b9054bddb12cea07fda41bb3a79a7b0149 ]
FunctionFS device structure 'struct ffs_dev' and driver data structure
'struct ffs_data' are bound to each other with cross-reference pointers
'ffs_data->private_data' and 'ffs_dev->ffs_data'. While the first one
is supposed to be valid through the whole life of 'struct ffs_data'
(and while 'struct ffs_dev' exists non-freed), the second one is cleared
in 'ffs_closed()' (called from 'ffs_data_reset()' or the last
'ffs_data_put()'). This can be called several times, alternating in
different order with 'ffs_free_inst()', that, if possible, clears
the other cross-reference.
As a result, different cases of these calls order may leave stale
cross-reference pointers, used when the pointed structure is already
freed. Even if it occasionally doesn't cause kernel crash, this error
is reported by KASAN-enabled kernel configuration.
For example, the case [last 'ffs_data_put()' - 'ffs_free_inst()'] was
fixed by commit cdafb6d8b8da ("usb: gadget: f_fs: Fix use-after-free in
ffs_free_inst").
The other case ['ffs_data_reset()' - 'ffs_free_inst()' - 'ffs_data_put()']
now causes KASAN reported error [1], when 'ffs_data_reset()' clears
'ffs_dev->ffs_data', then 'ffs_free_inst()' frees the 'struct ffs_dev',
but can't clear 'ffs_data->private_data', which is then accessed
in 'ffs_closed()' called from 'ffs_data_put()'. This happens since
'ffs_dev->ffs_data' reference is cleared too early.
Moreover, one more use case, when 'ffs_free_inst()' is called immediately
after mounting FunctionFS device (that is before the descriptors are
written and 'ffs_ready()' is called), and then 'ffs_data_reset()'
or 'ffs_data_put()' is called from accessing "ep0" file or unmounting
the device. This causes KASAN error report like [2], since
'ffs_dev->ffs_data' is not yet set when 'ffs_free_inst()' can't properly
clear 'ffs_data->private_data', that is later accessed to freed structure.
Fix these (and may be other) cases of stale pointers access by moving
setting and clearing of the mentioned cross-references to the single
places, setting both of them when 'struct ffs_data' is created and
bound to 'struct ffs_dev', and clearing both of them when one of the
structures is destroyed. It seems convenient to make this pointer
initialization and structures binding in 'ffs_acquire_dev()' and
make pointers clearing in 'ffs_release_dev()'. This required some
changes in these functions parameters and return types.
Also, 'ffs_release_dev()' calling requires some cleanup, fixing minor
issues, like (1) 'ffs_release_dev()' is not called if 'ffs_free_inst()'
is called without unmounting the device, and "release_dev" callback
is not called at all, or (2) "release_dev" callback is called before
"ffs_closed" callback on unmounting, which seems to be not correctly
nested with "acquire_dev" and "ffs_ready" callbacks.
Make this cleanup togther with other mentioned 'ffs_release_dev()' changes.
[1]
==================================================================
root@rcar-gen3:~# mkdir /dev/cfs
root@rcar-gen3:~# mkdir /dev/ffs
root@rcar-gen3:~# modprobe libcomposite
root@rcar-gen3:~# mount -t configfs none /dev/cfs
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[ 64.340664] file system registered
root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs
root@rcar-gen3:~# cd /dev/ffs
root@rcar-gen3:/dev/ffs# /home/root/ffs-test
ffs-test: info: ep0: writing descriptors (in v2 format)
[ 83.181442] read descriptors
[ 83.186085] read strings
ffs-test: info: ep0: writing strings
ffs-test: dbg: ep1: starting
ffs-test: dbg: ep2: starting
ffs-test: info: ep1: starts
ffs-test: info: ep2: starts
ffs-test: info: ep0: starts
^C
root@rcar-gen3:/dev/ffs# cd /home/root/
root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[ 98.935061] unloading
root@rcar-gen3:~# umount /dev/ffs
[ 102.734301] ==================================================================
[ 102.742059] BUG: KASAN: use-after-free in ffs_release_dev+0x64/0xa8 [usb_f_fs]
[ 102.749683] Write of size 1 at addr ffff0004d46ff549 by task umount/2997
[ 102.756709]
[ 102.758311] CPU: 0 PID: 2997 Comm: umount Not tainted 5.13.0-rc4+ #8
[ 102.764971] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[ 102.772179] Call trace:
[ 102.774779] dump_backtrace+0x0/0x330
[ 102.778653] show_stack+0x20/0x2c
[ 102.782152] dump_stack+0x11c/0x1ac
[ 102.785833] print_address_description.constprop.0+0x30/0x274
[ 102.791862] kasan_report+0x14c/0x1c8
[ 102.795719] __asan_report_store1_noabort+0x34/0x58
[ 102.800840] ffs_release_dev+0x64/0xa8 [usb_f_fs]
[ 102.805801] ffs_fs_kill_sb+0x50/0x84 [usb_f_fs]
[ 102.810663] deactivate_locked_super+0xa0/0xf0
[ 102.815339] deactivate_super+0x98/0xac
[ 102.819378] cleanup_mnt+0xd0/0x1b0
[ 102.823057] __cleanup_mnt+0x1c/0x28
[ 102.826823] task_work_run+0x104/0x180
[ 102.830774] do_notify_resume+0x458/0x14e0
[ 102.835083] work_pending+0xc/0x5f8
[ 102.838762]
[ 102.840357] Allocated by task 2988:
[ 102.844032] kasan_save_stack+0x28/0x58
[ 102.848071] kasan_set_track+0x28/0x3c
[ 102.852016] ____kasan_kmalloc+0x84/0x9c
[ 102.856142] __kasan_kmalloc+0x10/0x1c
[ 102.860088] __kmalloc+0x214/0x2f8
[ 102.863678] kzalloc.constprop.0+0x14/0x20 [usb_f_fs]
[ 102.868990] ffs_alloc_inst+0x8c/0x208 [usb_f_fs]
[ 102.873942] try_get_usb_function_instance+0xf0/0x164 [libcomposite]
[ 102.880629] usb_get_function_instance+0x64/0x68 [libcomposite]
[ 102.886858] function_make+0x128/0x1ec [libcomposite]
[ 102.892185] configfs_mkdir+0x330/0x590 [configfs]
[ 102.897245] vfs_mkdir+0x12c/0x1bc
[ 102.900835] do_mkdirat+0x180/0x1d0
[ 102.904513] __arm64_sys_mkdirat+0x80/0x94
[ 102.908822] invoke_syscall+0xf8/0x25c
[ 102.912772] el0_svc_common.constprop.0+0x150/0x1a0
[ 102.917891] do_el0_svc+0xa0/0xd4
[ 102.921386] el0_svc+0x24/0x34
[ 102.924613] el0_sync_handler+0xcc/0x154
[ 102.928743] el0_sync+0x198/0x1c0
[ 102.932238]
[ 102.933832] Freed by task 2996:
[ 102.937144] kasan_save_stack+0x28/0x58
[ 102.941181] kasan_set_track+0x28/0x3c
[ 102.945128] kasan_set_free_info+0x28/0x4c
[ 102.949435] ____kasan_slab_free+0x104/0x118
[ 102.953921] __kasan_slab_free+0x18/0x24
[ 102.958047] slab_free_freelist_hook+0x148/0x1f0
[ 102.962897] kfree+0x318/0x440
[ 102.966123] ffs_free_inst+0x164/0x2d8 [usb_f_fs]
[ 102.971075] usb_put_function_instance+0x84/0xa4 [libcomposite]
[ 102.977302] ffs_attr_release+0x18/0x24 [usb_f_fs]
[ 102.982344] config_item_put+0x140/0x1a4 [configfs]
[ 102.987486] configfs_rmdir+0x3fc/0x518 [configfs]
[ 102.992535] vfs_rmdir+0x114/0x234
[ 102.996122] do_rmdir+0x274/0x2b0
[ 102.999617] __arm64_sys_unlinkat+0x94/0xc8
[ 103.004015] invoke_syscall+0xf8/0x25c
[ 103.007961] el0_svc_common.constprop.0+0x150/0x1a0
[ 103.013080] do_el0_svc+0xa0/0xd4
[ 103.016575] el0_svc+0x24/0x34
[ 103.019801] el0_sync_handler+0xcc/0x154
[ 103.023930] el0_sync+0x198/0x1c0
[ 103.027426]
[ 103.029020] The buggy address belongs to the object at ffff0004d46ff500
[ 103.029020] which belongs to the cache kmalloc-128 of size 128
[ 103.042079] The buggy address is located 73 bytes inside of
[ 103.042079] 128-byte region [ffff0004d46ff500, ffff0004d46ff580)
[ 103.054236] The buggy address belongs to the page:
[ 103.059262] page:0000000021aa849b refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0004d46fee00 pfn:0x5146fe
[ 103.070437] head:0000000021aa849b order:1 compound_mapcount:0
[ 103.076456] flags: 0x8000000000010200(slab|head|zone=2)
[ 103.081948] raw: 8000000000010200 fffffc0013521a80 0000000d0000000d ffff0004c0002300
[ 103.090052] raw: ffff0004d46fee00 000000008020001e 00000001ffffffff 0000000000000000
[ 103.098150] page dumped because: kasan: bad access detected
[ 103.103985]
[ 103.105578] Memory state around the buggy address:
[ 103.110602] ffff0004d46ff400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 103.118161] ffff0004d46ff480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 103.125726] >ffff0004d46ff500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 103.133284] ^
[ 103.139120] ffff0004d46ff580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 103.146679] ffff0004d46ff600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 103.154238] ==================================================================
[ 103.161792] Disabling lock debugging due to kernel taint
[ 103.167319] Unable to handle kernel paging request at virtual address 0037801d6000018e
[ 103.175406] Mem abort info:
[ 103.178457] ESR = 0x96000004
[ 103.181609] EC = 0x25: DABT (current EL), IL = 32 bits
[ 103.187020] SET = 0, FnV = 0
[ 103.190185] EA = 0, S1PTW = 0
[ 103.193417] Data abort info:
[ 103.196385] ISV = 0, ISS = 0x00000004
[ 103.200315] CM = 0, WnR = 0
[ 103.203366] [0037801d6000018e] address between user and kernel address ranges
[ 103.210611] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 103.216231] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk sata_rc4
[ 103.259233] CPU: 0 PID: 2997 Comm: umount Tainted: G B 5.13.0-rc4+ #8
[ 103.267031] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[ 103.273951] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--)
[ 103.280001] pc : ffs_data_clear+0x138/0x370 [usb_f_fs]
[ 103.285197] lr : ffs_data_clear+0x124/0x370 [usb_f_fs]
[ 103.290385] sp : ffff800014777a80
[ 103.293725] x29: ffff800014777a80 x28: ffff0004d7649c80 x27: 0000000000000000
[ 103.300931] x26: ffff800014777fb0 x25: ffff60009aec9394 x24: ffff0004d7649ca4
[ 103.308136] x23: 1fffe0009a3d063a x22: dfff800000000000 x21: ffff0004d1e831d0
[ 103.315340] x20: e1c000eb00000bb4 x19: ffff0004d1e83000 x18: 0000000000000000
[ 103.322545] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 103.329748] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000012ef658
[ 103.336952] x11: ffff7000012ef658 x10: 0720072007200720 x9 : ffff800011322648
[ 103.344157] x8 : ffff800014777818 x7 : ffff80000977b2c7 x6 : 0000000000000000
[ 103.351359] x5 : 0000000000000001 x4 : ffff7000012ef659 x3 : 0000000000000001
[ 103.358562] x2 : 0000000000000000 x1 : 1c38001d6000018e x0 : e1c000eb00000c70
[ 103.365766] Call trace:
[ 103.368235] ffs_data_clear+0x138/0x370 [usb_f_fs]
[ 103.373076] ffs_data_reset+0x20/0x304 [usb_f_fs]
[ 103.377829] ffs_data_closed+0x1ec/0x244 [usb_f_fs]
[ 103.382755] ffs_fs_kill_sb+0x70/0x84 [usb_f_fs]
[ 103.387420] deactivate_locked_super+0xa0/0xf0
[ 103.391905] deactivate_super+0x98/0xac
[ 103.395776] cleanup_mnt+0xd0/0x1b0
[ 103.399299] __cleanup_mnt+0x1c/0x28
[ 103.402906] task_work_run+0x104/0x180
[ 103.406691] do_notify_resume+0x458/0x14e0
[ 103.410823] work_pending+0xc/0x5f8
[ 103.414351] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821)
[ 103.420490] ---[ end trace 57b43a50e8244f57 ]---
Segmentation fault
root@rcar-gen3:~#
==================================================================
[2]
==================================================================
root@rcar-gen3:~# mkdir /dev/ffs
root@rcar-gen3:~# modprobe libcomposite
root@rcar-gen3:~#
root@rcar-gen3:~# mount -t configfs none /dev/cfs
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1
root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[ 54.766480] file system registered
root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs
root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs
[ 63.197597] unloading
root@rcar-gen3:~# cat /dev/ffs/ep0
cat: read error:[ 67.213506] ==================================================================
[ 67.222095] BUG: KASAN: use-after-free in ffs_data_clear+0x70/0x370 [usb_f_fs]
[ 67.229699] Write of size 1 at addr ffff0004c26e974a by task cat/2994
[ 67.236446]
[ 67.238045] CPU: 0 PID: 2994 Comm: cat Not tainted 5.13.0-rc4+ #8
[ 67.244431] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[ 67.251624] Call trace:
[ 67.254212] dump_backtrace+0x0/0x330
[ 67.258081] show_stack+0x20/0x2c
[ 67.261579] dump_stack+0x11c/0x1ac
[ 67.265260] print_address_description.constprop.0+0x30/0x274
[ 67.271286] kasan_report+0x14c/0x1c8
[ 67.275143] __asan_report_store1_noabort+0x34/0x58
[ 67.280265] ffs_data_clear+0x70/0x370 [usb_f_fs]
[ 67.285220] ffs_data_reset+0x20/0x304 [usb_f_fs]
[ 67.290172] ffs_data_closed+0x240/0x244 [usb_f_fs]
[ 67.295305] ffs_ep0_release+0x40/0x54 [usb_f_fs]
[ 67.300256] __fput+0x304/0x580
[ 67.303576] ____fput+0x18/0x24
[ 67.306893] task_work_run+0x104/0x180
[ 67.310846] do_notify_resume+0x458/0x14e0
[ 67.315154] work_pending+0xc/0x5f8
[ 67.318834]
[ 67.320429] Allocated by task 2988:
[ 67.324105] kasan_save_stack+0x28/0x58
[ 67.328144] kasan_set_track+0x28/0x3c
[ 67.332090] ____kasan_kmalloc+0x84/0x9c
[ 67.336217] __kasan_kmalloc+0x10/0x1c
[ 67.340163] __kmalloc+0x214/0x2f8
[ 67.343754] kzalloc.constprop.0+0x14/0x20 [usb_f_fs]
[ 67.349066] ffs_alloc_inst+0x8c/0x208 [usb_f_fs]
[ 67.354017] try_get_usb_function_instance+0xf0/0x164 [libcomposite]
[ 67.360705] usb_get_function_instance+0x64/0x68 [libcomposite]
[ 67.366934] function_make+0x128/0x1ec [libcomposite]
[ 67.372260] configfs_mkdir+0x330/0x590 [configfs]
[ 67.377320] vfs_mkdir+0x12c/0x1bc
[ 67.380911] do_mkdirat+0x180/0x1d0
[ 67.384589] __arm64_sys_mkdirat+0x80/0x94
[ 67.388899] invoke_syscall+0xf8/0x25c
[ 67.392850] el0_svc_common.constprop.0+0x150/0x1a0
[ 67.397969] do_el0_svc+0xa0/0xd4
[ 67.401464] el0_svc+0x24/0x34
[ 67.404691] el0_sync_handler+0xcc/0x154
[ 67.408819] el0_sync+0x198/0x1c0
[ 67.412315]
[ 67.413909] Freed by task 2993:
[ 67.417220] kasan_save_stack+0x28/0x58
[ 67.421257] kasan_set_track+0x28/0x3c
[ 67.425204] kasan_set_free_info+0x28/0x4c
[ 67.429513] ____kasan_slab_free+0x104/0x118
[ 67.434001] __kasan_slab_free+0x18/0x24
[ 67.438128] slab_free_freelist_hook+0x148/0x1f0
[ 67.442978] kfree+0x318/0x440
[ 67.446205] ffs_free_inst+0x164/0x2d8 [usb_f_fs]
[ 67.451156] usb_put_function_instance+0x84/0xa4 [libcomposite]
[ 67.457385] ffs_attr_release+0x18/0x24 [usb_f_fs]
[ 67.462428] config_item_put+0x140/0x1a4 [configfs]
[ 67.467570] configfs_rmdir+0x3fc/0x518 [configfs]
[ 67.472626] vfs_rmdir+0x114/0x234
[ 67.476215] do_rmdir+0x274/0x2b0
[ 67.479710] __arm64_sys_unlinkat+0x94/0xc8
[ 67.484108] invoke_syscall+0xf8/0x25c
[ 67.488055] el0_svc_common.constprop.0+0x150/0x1a0
[ 67.493175] do_el0_svc+0xa0/0xd4
[ 67.496671] el0_svc+0x24/0x34
[ 67.499896] el0_sync_handler+0xcc/0x154
[ 67.504024] el0_sync+0x198/0x1c0
[ 67.507520]
[ 67.509114] The buggy address belongs to the object at ffff0004c26e9700
[ 67.509114] which belongs to the cache kmalloc-128 of size 128
[ 67.522171] The buggy address is located 74 bytes inside of
[ 67.522171] 128-byte region [ffff0004c26e9700, ffff0004c26e9780)
[ 67.534328] The buggy address belongs to the page:
[ 67.539355] page:000000003177a217 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5026e8
[ 67.549175] head:000000003177a217 order:1 compound_mapcount:0
[ 67.555195] flags: 0x8000000000010200(slab|head|zone=2)
[ 67.560687] raw: 8000000000010200 fffffc0013037100 0000000c00000002 ffff0004c0002300
[ 67.568791] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
[ 67.576890] page dumped because: kasan: bad access detected
[ 67.582725]
[ 67.584318] Memory state around the buggy address:
[ 67.589343] ffff0004c26e9600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 67.596903] ffff0004c26e9680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 67.604463] >ffff0004c26e9700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 67.612022] ^
[ 67.617860] ffff0004c26e9780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 67.625421] ffff0004c26e9800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 67.632981] ==================================================================
[ 67.640535] Disabling lock debugging due to kernel taint
File descriptor[ 67.646100] Unable to handle kernel paging request at virtual address fabb801d4000018d
in bad state
[ 67.655456] Mem abort info:
[ 67.659619] ESR = 0x96000004
[ 67.662801] EC = 0x25: DABT (current EL), IL = 32 bits
[ 67.668225] SET = 0, FnV = 0
[ 67.671375] EA = 0, S1PTW = 0
[ 67.674613] Data abort info:
[ 67.677587] ISV = 0, ISS = 0x00000004
[ 67.681522] CM = 0, WnR = 0
[ 67.684588] [fabb801d4000018d] address between user and kernel address ranges
[ 67.691849] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 67.697470] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul sha2_ce sha1_ce evdev sata_rcar libata xhci_plat_hcd scsi_mod xhci_hcd rene4
[ 67.740467] CPU: 0 PID: 2994 Comm: cat Tainted: G B 5.13.0-rc4+ #8
[ 67.748005] Hardware name: Renesas Salvator-X board based on r8a77951 (DT)
[ 67.754924] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--)
[ 67.760974] pc : ffs_data_clear+0x138/0x370 [usb_f_fs]
[ 67.766178] lr : ffs_data_clear+0x124/0x370 [usb_f_fs]
[ 67.771365] sp : ffff800014767ad0
[ 67.774706] x29: ffff800014767ad0 x28: ffff800009cf91c0 x27: ffff0004c54861a0
[ 67.781913] x26: ffff0004dc90b288 x25: 1fffe00099ec10f5 x24: 00000000000a801d
[ 67.789118] x23: 1fffe00099f6953a x22: dfff800000000000 x21: ffff0004cfb4a9d0
[ 67.796322] x20: d5e000ea00000bb1 x19: ffff0004cfb4a800 x18: 0000000000000000
[ 67.803526] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 67.810730] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000028ecefa
[ 67.817934] x11: ffff7000028ecefa x10: 0720072007200720 x9 : ffff80001132c014
[ 67.825137] x8 : ffff8000147677d8 x7 : ffff8000147677d7 x6 : 0000000000000000
[ 67.832341] x5 : 0000000000000001 x4 : ffff7000028ecefb x3 : 0000000000000001
[ 67.839544] x2 : 0000000000000005 x1 : 1abc001d4000018d x0 : d5e000ea00000c6d
[ 67.846748] Call trace:
[ 67.849218] ffs_data_clear+0x138/0x370 [usb_f_fs]
[ 67.854058] ffs_data_reset+0x20/0x304 [usb_f_fs]
[ 67.858810] ffs_data_closed+0x240/0x244 [usb_f_fs]
[ 67.863736] ffs_ep0_release+0x40/0x54 [usb_f_fs]
[ 67.868488] __fput+0x304/0x580
[ 67.871665] ____fput+0x18/0x24
[ 67.874837] task_work_run+0x104/0x180
[ 67.878622] do_notify_resume+0x458/0x14e0
[ 67.882754] work_pending+0xc/0x5f8
[ 67.886282] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821)
[ 67.892422] ---[ end trace 6d7cedf53d7abbea ]---
Segmentation fault
root@rcar-gen3:~#
==================================================================
Fixes: 4b187fceec3c ("usb: gadget: FunctionFS: add devices management code")
Fixes: 3262ad824307 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference")
Fixes: cdafb6d8b8da ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst")
Reported-by: Bhuvanesh Surachari <bhuvanesh_surachari@mentor.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20210603171507.22514-1-andrew_gabbasov@mentor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b31d9d6d7abbf6483b871b6370bc31c930d53f54 upstream.
when system is doing s4, the process of xhci_resume may be as below:
1、xhci_mem_cleanup
2、xhci_init->xhci_mem_init->xhci_mem_cleanup(when memory is not enough).
xhci_mem_cleanup will be executed twice when system is out of memory.
xhci->port_caps is freed in xhci_mem_cleanup,but it isn't set to NULL.
It will be freed twice when xhci_mem_cleanup is called the second time.
We got following bug when system resumes from s4:
kernel BUG at mm/slub.c:309!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
CPU: 0 PID: 5929 Tainted: G S W 5.4.96-arm64-desktop #1
pc : __slab_free+0x5c/0x424
lr : kfree+0x30c/0x32c
Call trace:
__slab_free+0x5c/0x424
kfree+0x30c/0x32c
xhci_mem_cleanup+0x394/0x3cc
xhci_mem_init+0x9ac/0x1070
xhci_init+0x8c/0x1d0
xhci_resume+0x1cc/0x5fc
xhci_plat_resume+0x64/0x70
platform_pm_thaw+0x28/0x60
dpm_run_callback+0x54/0x24c
device_resume+0xd0/0x200
async_resume+0x24/0x60
async_run_entry_fn+0x44/0x110
process_one_work+0x1f0/0x490
worker_thread+0x5c/0x450
kthread+0x158/0x160
ret_from_fork+0x10/0x24
Original patch that caused this issue was backported to 4.4 stable,
so this should be backported to 4.4 stabe as well.
Fixes: cf0ee7c60c89 ("xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com>
Signed-off-by: Tao Xue <xuetao09@huawei.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210617150354.1512157-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 03026197bb657d784220b040c6173267a0375741 upstream.
typec_register_altmode() misses to call altmode_id_remove() in an error
path. Add the missed function call to fix it.
Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Cc: stable <stable@vger.kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20210617073226.47599-1-jingxiangfeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 84524d1232ecca7cf8678e851b254f05cff4040a upstream.
Creation EP's debugfs called earlier than debugfs folder for dwc3
device created. As result EP's debugfs are created in '/sys/kernel/debug'
instead of '/sys/kernel/debug/usb/dwc3.1.auto'.
Moved dwc3_debugfs_init() function call before calling
dwc3_core_init_mode() to allow create dwc3 debugfs parent before
creating EP's debugfs's.
Fixes: 8d396bb0a5b6 ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/01fafb5b2d8335e98e6eadbac61fc796bdf3ec1a.1623948457.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4897807753e078655a78de39ed76044d784f3e63 upstream.
The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be
a CDC-ACM device in its descriptors but in fact is not. If it is run
with echo disabled it returns garbled data, probably due to something
that happens in the TTY layer. And when run with echo enabled (the
default), it will mess up the calibration data of the sensor the first
time any data is sent to the device.
In short, I had a bad time after connecting the sensor and trying to get
it to work. I hope blacklisting it in the cdc-acm driver will save
someone else a bit of trouble.
Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210622141454.337948-1-hannu@hrtk.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d143825baf15f204dac60acdf95e428182aa3374 upstream.
The ROM load sometimes seems to return an unknown status
(RENESAS_ROM_STATUS_NO_RESULT) instead of success / fail.
If the ROM load indeed failed this leads to failures when trying to
communicate with the controller later on.
Attempt to load firmware using RAM load in those cases.
Fixes: 2478be82de44 ("usb: renesas-xhci: Add ROM loader for uPD720201")
Cc: stable@vger.kernel.org
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210615153758.253572-1-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4249d6fbc10fd997abdf8a1ea49c0389a0edf706 upstream.
when receive eem echo command, it will send a response,
but queue this response to the usb request which allocate
from gadget device endpoint zero,
and transmit the request to IN endpoint of eem interface.
on dwc3 gadget, it will trigger following warning in function
__dwc3_gadget_ep_queue(),
if (WARN(req->dep != dep, "request %pK belongs to '%s'\n",
&req->request, req->dep->name))
return -EINVAL;
fix it by allocating a usb request from IN endpoint of eem interface,
and transmit the usb request to same IN endpoint of eem interface.
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210616115142.34075-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4bf584a03eec674975ee9fe36c8583d9d470dab1 upstream.
When do system reboot, it calls dwc3_shutdown and the whole debugfs
for dwc3 has removed first, when the gadget tries to do deinit, and
remove debugfs for its endpoints, it meets NULL pointer dereference
issue when call debugfs_lookup. Fix it by removing the whole dwc3
debugfs later than dwc3_drd_exit.
[ 2924.958838] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002
....
[ 2925.030994] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
[ 2925.037005] pc : inode_permission+0x2c/0x198
[ 2925.041281] lr : lookup_one_len_common+0xb0/0xf8
[ 2925.045903] sp : ffff80001276ba70
[ 2925.049218] x29: ffff80001276ba70 x28: ffff0000c01f0000 x27: 0000000000000000
[ 2925.056364] x26: ffff800011791e70 x25: 0000000000000008 x24: dead000000000100
[ 2925.063510] x23: dead000000000122 x22: 0000000000000000 x21: 0000000000000001
[ 2925.070652] x20: ffff8000122c6188 x19: 0000000000000000 x18: 0000000000000000
[ 2925.077797] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000004
[ 2925.084943] x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000030
[ 2925.092087] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : ffff8000102b2420
[ 2925.099232] x8 : 7f7f7f7f7f7f7f7f x7 : feff73746e2f6f64 x6 : 0000000000008080
[ 2925.106378] x5 : 61c8864680b583eb x4 : 209e6ec2d263dbb7 x3 : 000074756f307065
[ 2925.113523] x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffff8000122c6188
[ 2925.120671] Call trace:
[ 2925.123119] inode_permission+0x2c/0x198
[ 2925.127042] lookup_one_len_common+0xb0/0xf8
[ 2925.131315] lookup_one_len_unlocked+0x34/0xb0
[ 2925.135764] lookup_positive_unlocked+0x14/0x50
[ 2925.140296] debugfs_lookup+0x68/0xa0
[ 2925.143964] dwc3_gadget_free_endpoints+0x84/0xb0
[ 2925.148675] dwc3_gadget_exit+0x28/0x78
[ 2925.152518] dwc3_drd_exit+0x100/0x1f8
[ 2925.156267] dwc3_remove+0x11c/0x120
[ 2925.159851] dwc3_shutdown+0x14/0x20
[ 2925.163432] platform_shutdown+0x28/0x38
[ 2925.167360] device_shutdown+0x15c/0x378
[ 2925.171291] kernel_restart_prepare+0x3c/0x48
[ 2925.175650] kernel_restart+0x1c/0x68
[ 2925.179316] __do_sys_reboot+0x218/0x240
[ 2925.183247] __arm64_sys_reboot+0x28/0x30
[ 2925.187262] invoke_syscall+0x48/0x100
[ 2925.191017] el0_svc_common.constprop.0+0x48/0xc8
[ 2925.195726] do_el0_svc+0x28/0x88
[ 2925.199045] el0_svc+0x20/0x30
[ 2925.202104] el0_sync_handler+0xa8/0xb0
[ 2925.205942] el0_sync+0x148/0x180
[ 2925.209270] Code: a9025bf5 2a0203f5 121f0056 370802b5 (79400660)
[ 2925.215372] ---[ end trace 124254d8e485a58b ]---
[ 2925.220012] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 2925.227676] Kernel Offset: disabled
[ 2925.231164] CPU features: 0x00001001,20000846
[ 2925.235521] Memory Limit: none
[ 2925.238580] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
Fixes: 8d396bb0a5b6 ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically")
Cc: Jack Pham <jackp@codeaurora.org>
Tested-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20210608105656.10795-1-peter.chen@kernel.org
(cherry picked from commit 2a042767814bd0edf2619f06fecd374e266ea068)
Link: https://lore.kernel.org/r/20210615080847.GA10432@jackp-linux.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8d396bb0a5b62b326f6be7594d8bd46b088296bd upstream.
The DWC3 DebugFS directory and files are currently created once
during probe. This includes creation of subdirectories for each
of the gadget's endpoints. This works fine for peripheral-only
controllers, as dwc3_core_init_mode() calls dwc3_gadget_init()
just prior to calling dwc3_debugfs_init().
However, for dual-role controllers, dwc3_core_init_mode() will
instead call dwc3_drd_init() which is problematic in a few ways.
First, the initial state must be determined, then dwc3_set_mode()
will have to schedule drd_work and by then dwc3_debugfs_init()
could have already been invoked. Even if the initial mode is
peripheral, dwc3_gadget_init() happens after the DebugFS files
are created, and worse so if the initial state is host and the
controller switches to peripheral much later. And secondly,
even if the gadget endpoints' debug entries were successfully
created, if the controller exits peripheral mode, its dwc3_eps
are freed so the debug files would now hold stale references.
So it is best if the DebugFS endpoint entries are created and
removed dynamically at the same time the underlying dwc3_eps are.
Do this by calling dwc3_debugfs_create_endpoint_dir() as each
endpoint is created, and conversely remove the DebugFS entry when
the endpoint is freed.
Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210529192932.22912-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c6d580d96f140596d69220f60ce0cfbea4ee5c0f upstream.
i.MX8MM cannot detect certain CDP USB HUBs. usbmisc_imx.c driver is not
following CDP timing requirements defined by USB BC 1.2 specification
and section 3.2.4 Detection Timing CDP.
During Primary Detection the i.MX device should turn on VDP_SRC and
IDM_SINK for a minimum of 40ms (TVDPSRC_ON). After a time of TVDPSRC_ON,
the i.MX is allowed to check the status of the D- line. Current
implementation is waiting between 1ms and 2ms, and certain BC 1.2
complaint USB HUBs cannot be detected. Increase delay to 40ms allowing
enough time for primary detection.
During secondary detection the i.MX is required to disable VDP_SRC and
IDM_SNK, and enable VDM_SRC and IDP_SINK for at least 40ms (TVDMSRC_ON).
Current implementation is not disabling VDP_SRC and IDM_SNK, introduce
disable sequence in imx7d_charger_secondary_detection() function.
VDM_SRC and IDP_SINK should be enabled for at least 40ms (TVDMSRC_ON).
Increase delay allowing enough time for detection.
Cc: <stable@vger.kernel.org>
Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection")
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20210614175013.495808-1-breno.lima@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a7d8d1c7a7f73e780aa9ae74926ae5985b2f895f upstream.
The Cypress CY7C65632 appears to have an issue with auto suspend and
detecting devices, not too dissimilar to the SMSC 5534B hub. It is
easiest to reproduce by connecting multiple mass storage devices to
the hub at the same time. On a Lenovo Yoga, around 1 in 3 attempts
result in the devices not being detected. It is however possible to
make them appear using lsusb -v.
Disabling autosuspend for this hub resolves the issue.
Fixes: 1208f9e1d758 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210614155524.2228800-1-andrew@lunn.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 142d0b24c1b17139f1aaaacae7542a38aa85640f upstream.
Fix the copy-paste mistake in the return path of typec_mux_match(),
where dev is considered a member of struct typec_switch rather than
struct typec_mux.
The two structs are identical in regards to having the struct device as
the first entry, so this provides no functional change.
Fixes: 3370db35193b ("usb: typec: Registering real device entries for the muxes")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610002132.3088083-1-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8212937305f84ef73ea81036dafb80c557583d4b upstream.
Current sequence utilizes dwc3_gadget_disable_irq() alongside
synchronize_irq() to ensure that no further DWC3 events are generated.
However, the dwc3_gadget_disable_irq() API only disables device
specific events. Endpoint events can still be generated. Briefly
disable the interrupt line, so that the cleanup code can run to
prevent device and endpoint events. (i.e. __dwc3_gadget_stop() and
dwc3_stop_active_transfers() respectively)
Without doing so, it can lead to both the interrupt handler and the
pullup disable routine both writing to the GEVNTCOUNT register, which
will cause an incorrect count being read from future interrupts.
Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller")
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1621571037-1424-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ade4805e296c8d1e40c842395bbe478c7210555 upstream.
Like the state_machine_timer, we should also cancel possible pending
frs hrtimer when unregister tcpm port.
Fixes: 8dc4bd073663 ("usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS)")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1622627829-11070-2-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3a13ff7ef4349d70d1d18378d661117dd5af8efe upstream.
A pending hrtimer may expire after the kthread_worker of tcpm port
is destroyed, see below kernel dump when do module unload, fix it
by cancel the 2 hrtimers.
[ 111.517018] Unable to handle kernel paging request at virtual address ffff8000118cb880
[ 111.518786] blk_update_request: I/O error, dev sda, sector 60061185 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[ 111.526594] Mem abort info:
[ 111.526597] ESR = 0x96000047
[ 111.526600] EC = 0x25: DABT (current EL), IL = 32 bits
[ 111.526604] SET = 0, FnV = 0
[ 111.526607] EA = 0, S1PTW = 0
[ 111.526610] Data abort info:
[ 111.526612] ISV = 0, ISS = 0x00000047
[ 111.526615] CM = 0, WnR = 1
[ 111.526619] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041d75000
[ 111.526623] [ffff8000118cb880] pgd=10000001bffff003, p4d=10000001bffff003, pud=10000001bfffe003, pmd=10000001bfffa003, pte=0000000000000000
[ 111.526642] Internal error: Oops: 96000047 [#1] PREEMPT SMP
[ 111.526647] Modules linked in: dwc3_imx8mp dwc3 phy_fsl_imx8mq_usb [last unloaded: tcpci]
[ 111.526663] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc4-00927-gebbe9dbd802c-dirty #36
[ 111.526670] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 111.526674] pstate: 800000c5 (Nzcv daIF -PAN -UAO -TCO BTYPE=--)
[ 111.526681] pc : queued_spin_lock_slowpath+0x1a0/0x390
[ 111.526695] lr : _raw_spin_lock_irqsave+0x88/0xb4
[ 111.526703] sp : ffff800010003e20
[ 111.526706] x29: ffff800010003e20 x28: ffff00017f380180
[ 111.537156] buffer_io_error: 6 callbacks suppressed
[ 111.537162] Buffer I/O error on dev sda1, logical block 60040704, async page read
[ 111.539932] x27: ffff00017f3801c0
[ 111.539938] x26: ffff800010ba2490 x25: 0000000000000000 x24: 0000000000000001
[ 111.543025] blk_update_request: I/O error, dev sda, sector 60061186 op 0x0:(READ) flags 0x0 phys_seg 7 prio class 0
[ 111.548304]
[ 111.548306] x23: 00000000000000c0 x22: ffff0000c2a9f184 x21: ffff00017f380180
[ 111.551374] Buffer I/O error on dev sda1, logical block 60040705, async page read
[ 111.554499]
[ 111.554503] x20: ffff0000c5f14210 x19: 00000000000000c0 x18: 0000000000000000
[ 111.557391] Buffer I/O error on dev sda1, logical block 60040706, async page read
[ 111.561218]
[ 111.561222] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 111.564205] Buffer I/O error on dev sda1, logical block 60040707, async page read
[ 111.570887] x14: 00000000000000f5 x13: 0000000000000001 x12: 0000000000000040
[ 111.570902] x11: ffff0000c05ac6d8
[ 111.583420] Buffer I/O error on dev sda1, logical block 60040708, async page read
[ 111.588978] x10: 0000000000000000 x9 : 0000000000040000
[ 111.588988] x8 : 0000000000000000
[ 111.597173] Buffer I/O error on dev sda1, logical block 60040709, async page read
[ 111.605766] x7 : ffff00017f384880 x6 : ffff8000118cb880
[ 111.605777] x5 : ffff00017f384880
[ 111.611094] Buffer I/O error on dev sda1, logical block 60040710, async page read
[ 111.617086] x4 : 0000000000000000 x3 : ffff0000c2a9f184
[ 111.617096] x2 : ffff8000118cb880
[ 111.622242] Buffer I/O error on dev sda1, logical block 60040711, async page read
[ 111.626927] x1 : ffff8000118cb880 x0 : ffff00017f384888
[ 111.626938] Call trace:
[ 111.626942] queued_spin_lock_slowpath+0x1a0/0x390
[ 111.795809] kthread_queue_work+0x30/0xc0
[ 111.799828] state_machine_timer_handler+0x20/0x30
[ 111.804624] __hrtimer_run_queues+0x140/0x1e0
[ 111.808990] hrtimer_interrupt+0xec/0x2c0
[ 111.813004] arch_timer_handler_phys+0x38/0x50
[ 111.817456] handle_percpu_devid_irq+0x88/0x150
[ 111.821991] __handle_domain_irq+0x80/0xe0
[ 111.826093] gic_handle_irq+0xc0/0x140
[ 111.829848] el1_irq+0xbc/0x154
[ 111.832991] arch_cpu_idle+0x1c/0x2c
[ 111.836572] default_idle_call+0x24/0x6c
[ 111.840497] do_idle+0x238/0x2ac
[ 111.843729] cpu_startup_entry+0x2c/0x70
[ 111.847657] rest_init+0xdc/0xec
[ 111.850890] arch_call_rest_init+0x14/0x20
[ 111.854988] start_kernel+0x508/0x540
[ 111.858659] Code: 910020e0 8b0200c2 f861d884 aa0203e1 (f8246827)
[ 111.864760] ---[ end trace 308b9a4a3dcb73ac ]---
[ 111.869381] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 111.876258] SMP: stopping secondary CPUs
[ 111.880185] Kernel Offset: disabled
[ 111.883673] CPU features: 0x00001001,20000846
[ 111.888031] Memory Limit: none
[ 111.891090] ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---
Fixes: 3ed8e1c2ac99 ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1622627829-11070-1-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 032e288097a553db5653af552dd8035cd2a0ba96 upstream.
usb_assign_descriptors() is called with 5 parameters,
the last 4 of which are the usb_descriptor_header for:
full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps),
high-speed (USB2.0 - 480Mbps),
super-speed (USB3.0 - 5Gbps),
super-speed-plus (USB3.1 - 10Gbps).
The differences between full/high/super-speed descriptors are usually
substantial (due to changes in the maximum usb block size from 64 to 512
to 1024 bytes and other differences in the specs), while the difference
between 5 and 10Gbps descriptors may be as little as nothing
(in many cases the same tuning is simply good enough).
However if a gadget driver calls usb_assign_descriptors() with
a NULL descriptor for super-speed-plus and is then used on a max 10gbps
configuration, the kernel will crash with a null pointer dereference,
when a 10gbps capable device port + cable + host port combination shows up.
(This wouldn't happen if the gadget max-speed was set to 5gbps, but
it of course defaults to the maximum, and there's no real reason to
artificially limit it)
The fix is to simply use the 5gbps descriptor as the 10gbps descriptor,
if a 10gbps descriptor wasn't provided.
Obviously this won't fix the problem if the 5gbps descriptor is also
NULL, but such cases can't be so trivially solved (and any such gadgets
are unlikely to be used with USB3 ports any way).
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210609024459.1126080-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90c4d05780d47e14a50e11a7f17373104cd47d25 upstream.
This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.
Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Michael R Sweet <msweet@msweet.org>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Cc: Wei Ming Chen <jj251510319013@gmail.com>
Cc: Will McVicker <willmcvicker@google.com>
Cc: Zqiang <qiang.zhang@windriver.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 305f670846a31a261462577dd0b967c4fa796871 upstream.
when skb_clone() or skb_copy_expand() fail,
it should pull skb with lengh indicated by header,
or not it will read network data and check it as header.
Cc: <stable@vger.kernel.org>
Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Link: https://lore.kernel.org/r/20210608233547.3767-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f7ec77cc8b64ff5037c1945e4650c65c458037d upstream.
The QFN20 part has a different GPIO/port function assignment. The
configuration struct bit field ordered as TX/RX/RS485/WAKEUP/CLK
which exactly matches GPIO0-3 for QFN24/28. However, QFN20 has a
different GPIO to primary function assignment.
Special case QFN20 to follow to properly detect which GPIOs are
available.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://lore.kernel.org/r/51830b2b24118eb0f77c5c9ac64ffb2f519dbb1d.1622218300.git.stefan@agner.ch
Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N")
Cc: stable@vger.kernel.org # 4.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the three requests which erroneously used usb_rcvctrlpipe().
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Cc: stable@vger.kernel.org # 3.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream.
Add device id for Zyxel Omni 56K Plus modem, this modem include:
USB chip:
NetChip
NET2888
Main chip:
901041A
F721501APGF
Another modem using the same chips is the Zyxel Omni 56K DUO/NEO,
could be added with the right USB ID.
Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream.
Add PID for the NovaTech OrionMX so it can be automatically detected.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6fc1db5e6211e30fbb1cee8d7925d79d4ed2ae14 upstream.
During unbind, ffs_func_eps_disable() will be executed, resulting in
completion callbacks for any pending USB requests. When using AIO,
irrespective of the completion status, io_data work is queued to
io_completion_wq to evaluate and handle the completed requests. Since
work runs asynchronously to the unbind() routine, there can be a
scenario where the work runs after the USB gadget has been fully
removed, resulting in accessing of a resource which has been already
freed. (i.e. usb_ep_free_request() accessing the USB ep structure)
Explicitly drain the io_completion_wq, instead of relying on the
destroy_workqueue() (in ffs_data_put()) to make sure no pending
completion work items are running.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1621644261-1236-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 843fabdd7623271330af07f1b7fbd7fabe33c8de upstream.
devm_ioremap_resource() can return an error, add missed check for it.
Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210607205007.71458-2-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1a85b350a7741776a406005b943e3dec02c424ed upstream.
device_get_next_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.
Fixes: 6701adfa9693 ("usb: typec: driver for Intel PMC mux control")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210607205007.71458-1-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f247f0a82a4f8c3bfed178d8fd9e069d1424ee4e upstream.
If ucsi_init() fails for some reason (e.g. ucsi_register_port()
fails or general communication failure to the PPM), particularly at
any point after the GET_CAPABILITY command had been issued, this
results in unwinding the initialization and returning an error.
However the ucsi structure's ucsi_capability member retains its
current value, including likely a non-zero num_connectors.
And because ucsi_init() itself is done in a workqueue a UCSI
interface driver will be unaware that it failed and may think the
ucsi_register() call was completely successful. Later, if
ucsi_unregister() is called, due to this stale ucsi->cap value it
would try to access the items in the ucsi->connector array which
might not be in a proper state or not even allocated at all and
results in NULL or invalid pointer dereference.
Fix this by clearing the ucsi->cap value to 0 during the error
path of ucsi_init() in order to prevent a later ucsi_unregister()
from entering the connector cleanup loop.
Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210609073535.5094-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d5ab95da2a41567440097c277c5771ad13928dad upstream.
As LKP noticed the Sparse is not happy about strict type handling:
.../typec/tcpm/wcove.c:380:50: sparse: expected unsigned short [usertype] header
.../typec/tcpm/wcove.c:380:50: sparse: got restricted __le16 const [usertype] header
Fix this by switching to use pd_header_cnt_le() instead of pd_header_cnt()
in the affected code.
Fixes: ae8a2ca8a221 ("usb: typec: Group all TCPCI/TCPM code together")
Fixes: 3c4fb9f16921 ("usb: typec: wcove: start using tcpm for USB PD support")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210609172202.83377-1-andriy.shevchenko@linux.intel.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b65ba0c362be665192381cc59e3ac3ef6f0dd1e1 upstream.
In commit 92af4fc6ec33 ("usb: musb: Fix suspend with devices
connected for a64"), the logic to support the
MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally
schedule the musb->irq_work delayed work.
This commit badly breaks ECM Gadget on AM335X. Indeed, with this
commit, one can observe massive packet loss:
$ ping 192.168.0.100
...
15 packets transmitted, 3 received, 80% packet loss, time 14316ms
Reverting this commit brings back a properly functioning ECM
Gadget. An analysis of the commit seems to indicate that a mistake was
made: the previous code was not falling through into the
MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is
taken.
Changing the logic to be as it was before the problematic commit *and*
only conditionally scheduling musb->irq_work resolves the regression:
$ ping 192.168.0.100
...
64 packets transmitted, 64 received, 0% packet loss, time 64475ms
Fixes: 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64")
Cc: stable@vger.kernel.org
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Drew Fustini <drew@beagleboard.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20210528140446.278076-1-thomas.petazzoni@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d00889080ab60051627dab1d85831cd9db750e2a upstream.
There is no validation of the index from dwc3_wIndex_to_dep() and we might
be referring a non-existing ep and trigger a NULL pointer exception. In
certain configurations we might use fewer eps and the index might wrongly
indicate a larger ep index than existing.
By adding this validation from the patch we can actually report a wrong
index back to the caller.
In our usecase we are using a composite device on an older kernel, but
upstream might use this fix also. Unfortunately, I cannot describe the
hardware for others to reproduce the issue as it is a proprietary
implementation.
[ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4
[ 82.966891] Mem abort info:
[ 82.969663] ESR = 0x96000006
[ 82.972703] Exception class = DABT (current EL), IL = 32 bits
[ 82.978603] SET = 0, FnV = 0
[ 82.981642] EA = 0, S1PTW = 0
[ 82.984765] Data abort info:
[ 82.987631] ISV = 0, ISS = 0x00000006
[ 82.991449] CM = 0, WnR = 0
[ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc
[ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000
[ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c)
[ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1
[ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO)
[ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c
[ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94
...
[ 83.141788] Call trace:
[ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c
[ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94
[ 83.181546] ---[ end trace aac6b5267d84c32f ]---
Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 03715ea2e3dbbc56947137ce3b4ac18a726b2f87 upstream.
There exists a possible scenario in which dwc3_gadget_init() can fail:
during during host -> peripheral mode switch in dwc3_set_mode(), and
a pending gadget driver fails to bind. Then, if the DRD undergoes
another mode switch from peripheral->host the resulting
dwc3_gadget_exit() will attempt to reference an invalid and dangling
dwc->gadget pointer as well as call dma_free_coherent() on unmapped
DMA pointers.
The exact scenario can be reproduced as follows:
- Start DWC3 in peripheral mode
- Configure ConfigFS gadget with FunctionFS instance (or use g_ffs)
- Run FunctionFS userspace application (open EPs, write descriptors, etc)
- Bind gadget driver to DWC3's UDC
- Switch DWC3 to host mode
=> dwc3_gadget_exit() is called. usb_del_gadget() will put the
ConfigFS driver instance on the gadget_driver_pending_list
- Stop FunctionFS application (closes the ep files)
- Switch DWC3 to peripheral mode
=> dwc3_gadget_init() fails as usb_add_gadget() calls
check_pending_gadget_drivers() and attempts to rebind the UDC
to the ConfigFS gadget but fails with -19 (-ENODEV) because the
FFS instance is not in FFS_ACTIVE state (userspace has not
re-opened and written the descriptors yet, i.e. desc_ready!=0).
- Switch DWC3 back to host mode
=> dwc3_gadget_exit() is called again, but this time dwc->gadget
is invalid.
Although it can be argued that userspace should take responsibility
for ensuring that the FunctionFS application be ready prior to
allowing the composite driver bind to the UDC, failure to do so
should not result in a panic from the kernel driver.
Fix this by setting dwc->gadget to NULL in the failure path of
dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out
unless the gadget pointer is valid.
Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically")
Cc: <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210528160405.17550-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
the probe
commit 1d0d3d818eafe1963ec1eaf302175cd14938188e upstream.
If an error occurs after a successful 'regulator_enable()' call,
'regulator_disable()' must be called.
Fix the error handling path of the probe accordingly.
The remove function doesn't need to be fixed, because the
'regulator_disable()' call is already hidden in 'dwc3_meson_g12a_suspend()'
which is called via 'pm_runtime_set_suspended()' in the remove function.
Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/79df054046224bbb0716a8c5c2082650290eec86.1621616013.git.christophe.jaillet@wanadoo.fr
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d2aa178d2ad2fb156711113790dde13e9aa2376 upstream.
When only PHY1 is used (for example on Odroid-HC4), the regmap init code
uses the usb2 ports when doesn't initialize the PHY1 regmap entry.
This fixes:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
...
pc : regmap_update_bits_base+0x40/0xa0
lr : dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
...
Call trace:
regmap_update_bits_base+0x40/0xa0
dwc3_meson_g12a_usb2_init_phy+0x4c/0xf8
dwc3_meson_g12a_usb2_init+0x7c/0xc8
dwc3_meson_g12a_usb_init+0x28/0x48
dwc3_meson_g12a_probe+0x298/0x540
platform_probe+0x70/0xe0
really_probe+0xf0/0x4d8
driver_probe_device+0xfc/0x168
...
Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately")
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210601084830.260196-1-narmstrong@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1958ff5ad2d4908b44a72bcf564dfe67c981e7fe upstream.
The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.
This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)
As such the first packet is now at most delayed by 300us.
Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.
This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3370139745853f7826895293e8ac3aec1430508e upstream.
[ 190.544755] configfs-gadget gadget: notify speed -44967296
This is because 4250000000 - 2**32 is -44967296.
Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9e3927f6373da54cb17e17f4bd700907e1123d2f ]
Chipidea also need sync interrupt before unbind the udc while
gadget remove driver, otherwise setup irq handling may happen
while unbind, see below dump generated from android function
switch stress test:
[ 4703.503056] android_work: sent uevent USB_STATE=CONNECTED
[ 4703.514642] android_work: sent uevent USB_STATE=DISCONNECTED
[ 4703.651339] android_work: sent uevent USB_STATE=CONNECTED
[ 4703.661806] init: Control message: Processed ctl.stop for 'adbd' from pid: 561 (system_server)
[ 4703.673469] init: processing action (init.svc.adbd=stopped) from (/system/etc/init/hw/init.usb.configfs.rc:14)
[ 4703.676451] Unable to handle kernel read from unreadable memory at virtual address 0000000000000090
[ 4703.676454] Mem abort info:
[ 4703.676458] ESR = 0x96000004
[ 4703.676461] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4703.676464] SET = 0, FnV = 0
[ 4703.676466] EA = 0, S1PTW = 0
[ 4703.676468] Data abort info:
[ 4703.676471] ISV = 0, ISS = 0x00000004
[ 4703.676473] CM = 0, WnR = 0
[ 4703.676478] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004a867000
[ 4703.676481] [0000000000000090] pgd=0000000000000000, p4d=0000000000000000
[ 4703.676503] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 4703.758297] Modules linked in: synaptics_dsx_i2c moal(O) mlan(O)
[ 4703.764327] CPU: 0 PID: 235 Comm: lmkd Tainted: G W O 5.10.9-00001-g3f5fd8487c38-dirty #63
[ 4703.773720] Hardware name: NXP i.MX8MNano EVK board (DT)
[ 4703.779033] pstate: 60400085 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[ 4703.785046] pc : _raw_write_unlock_bh+0xc0/0x2c8
[ 4703.789667] lr : android_setup+0x4c/0x168
[ 4703.793676] sp : ffff80001256bd80
[ 4703.796989] x29: ffff80001256bd80 x28: 00000000000000a8
[ 4703.802304] x27: ffff800012470000 x26: ffff80006d923000
[ 4703.807616] x25: ffff800012471000 x24: ffff00000b091140
[ 4703.812929] x23: ffff0000077dbd38 x22: ffff0000077da490
[ 4703.818242] x21: ffff80001256be30 x20: 0000000000000000
[ 4703.823554] x19: 0000000000000080 x18: ffff800012561048
[ 4703.828867] x17: 0000000000000000 x16: 0000000000000039
[ 4703.834180] x15: ffff8000106ad258 x14: ffff80001194c277
[ 4703.839493] x13: 0000000000003934 x12: 0000000000000000
[ 4703.844805] x11: 0000000000000000 x10: 0000000000000001
[ 4703.850117] x9 : 0000000000000000 x8 : 0000000000000090
[ 4703.855429] x7 : 6f72646e61203a70 x6 : ffff8000124f2450
[ 4703.860742] x5 : ffffffffffffffff x4 : 0000000000000009
[ 4703.866054] x3 : ffff8000108a290c x2 : ffff00007fb3a9c8
[ 4703.871367] x1 : 0000000000000000 x0 : 0000000000000090
[ 4703.876681] Call trace:
[ 4703.879129] _raw_write_unlock_bh+0xc0/0x2c8
[ 4703.883397] android_setup+0x4c/0x168
[ 4703.887059] udc_irq+0x824/0xa9c
[ 4703.890287] ci_irq+0x124/0x148
[ 4703.893429] __handle_irq_event_percpu+0x84/0x268
[ 4703.898131] handle_irq_event+0x64/0x14c
[ 4703.902054] handle_fasteoi_irq+0x110/0x210
[ 4703.906236] __handle_domain_irq+0x8c/0xd4
[ 4703.910332] gic_handle_irq+0x6c/0x124
[ 4703.914081] el1_irq+0xdc/0x1c0
[ 4703.917221] _raw_spin_unlock_irq+0x20/0x54
[ 4703.921405] finish_task_switch+0x84/0x224
[ 4703.925502] __schedule+0x4a4/0x734
[ 4703.928990] schedule+0xa0/0xe8
[ 4703.932132] do_notify_resume+0x150/0x184
[ 4703.936140] work_pending+0xc/0x40c
[ 4703.939633] Code: d5384613 521b0a69 d5184609 f9800111 (885ffd01)
[ 4703.945732] ---[ end trace ba5c1875ae49d53c ]---
[ 4703.950350] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 4703.957223] SMP: stopping secondary CPUs
[ 4703.961151] Kernel Offset: disabled
[ 4703.964638] CPU features: 0x0240002,2000200c
[ 4703.968905] Memory Limit: none
[ 4703.971963] Rebooting in 5 seconds..
Tested-by: faqiang.zhu <faqiang.zhu@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1620989984-7653-1-git-send-email-jun.li@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07adc0225484fc199e3dc15ec889f75f498c4fca ]
When cdns3_gadget_start() fails, a pairing PM usage counter
decrement is needed to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210412054908.7975-1-dinghao.liu@zju.edu.cn
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
In branches to which 24d209dba5a3 ("usb: dwc2: Fix hibernation between
host and device modes.") has been back-ported, the bus_suspended member
of struct dwc2_hsotg is only present in builds that support host-mode.
To avoid having to pull in several more non-Fix commits in order to
get it to compile, wrap the usage of the member in a macro conditional.
Fixes: 24d209dba5a3 ("usb: dwc2: Fix hibernation between host and device modes.")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream.
Return the exactly delay time given by root hub descriptor,
this helps to reduce resume time etc.
Due to the root hub descriptor is usually provided by the host
controller driver, if there is compatibility for a root hub,
we can fix it easily without affect other root hub
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit acf5631c239dfc53489f739c4ad47f490c5181ff upstream.
In typec_mux_match() "nval" is assigned the number of elements in the
"svid" fwnode property, then the variable is used to store the success
of the read and finally attempts to loop between 0 and "success" - i.e.
not at all - and the code returns indicating that no match was found.
Fix this by using a separate variable to track the success of the read,
to allow the loop to get a change to find a match.
Fixes: 96a6d031ca99 ("usb: typec: mux: Find the muxes by also matching against the device node")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210516034730.621461-1-bjorn.andersson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e752dbc59e1241b13b8c4f7b6eb582862e7668fe upstream.
The usb3_start_pipen() is called by renesas_usb3_ep_queue() and
usb3_request_done_pipen() so that usb3_start_pipen() is possible
to cause a race when getting usb3_first_req like below:
renesas_usb3_ep_queue()
spin_lock_irqsave()
list_add_tail()
spin_unlock_irqrestore()
usb3_start_pipen()
usb3_first_req = usb3_get_request() --- [1]
--- interrupt ---
usb3_irq_dma_int()
usb3_request_done_pipen()
usb3_get_request()
usb3_start_pipen()
usb3_first_req = usb3_get_request()
...
(the req is possible to be finished in the interrupt)
The usb3_first_req [1] above may have been finished after the interrupt
ended so that this driver caused to start a transfer wrongly. To fix this
issue, getting/checking the usb3_first_req are under spin_lock_irqsave()
in the same section.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210524060155.1178724-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25dda9fc56bd90d45f9a4516bcfa5211e61b4290 upstream.
The driver incorrectly uses req->num_pending_sgs to track both the
number of pending and queued SG entries. It only prepares the next
request if the previous is done, and it doesn't update num_pending_sgs
until there is TRB completion interrupt. This may starve the controller
of more TRBs until the num_pending_sgs is decremented.
Fix this by decrementing the num_pending_sgs after they are queued and
properly track both num_mapped_sgs and num_queued_sgs.
Fixes: c96e6725db9d ("usb: dwc3: gadget: Correct the logic for queuing sgs")
Cc: <stable@vger.kernel.org>
Reported-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ba24591dbcaad8f244a3e88bd449bb7205a5aec3.1620874069.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f8e8c1b2f782e7391e8a1c25648ce756e2a7d481 upstream.
This adds the device id for the ADLINK ND-6530 which is a PL2303GC based
device.
Signed-off-by: Zolton Jheng <s6668c2t@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c5a80540e425a5f9a82b0f3163e3b6a4331f33bc upstream.
Add the IDS GmbH Vendor ID and the Product IDs for SI31A (2xRS232)
and CM31A (LoRaWAN Modem).
Signed-off-by: Dominik Andreas Schorpp <dominik.a.schorpp@ids.de>
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e467714f822b5d167a7fb03d34af91b5b6af1827 upstream.
Add support for the following Telit LE910-S1 compositions:
0x7010: rndis, tty, tty, tty
0x7011: ecm, tty, tty, tty
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20210428072634.5091-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 89b1a3d811e6f8065d6ae8a25e7682329b4a31e2 upstream.
This adds support for the Startech.com generic serial to USB converter.
It seems to be a bone stock TI_3410. I have been using this patch for
years.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4f2629ea67e7225c3fd292c7fe4f5b3c9d6392de upstream.
Syzbot found that the kernel generates a WARNing if the user tries to
submit a bulk transfer through usbfs with a buffer that is way too
large. This isn't a bug in the kernel; it's merely an invalid request
from the user and the usbfs code does handle it correctly.
In theory the same thing can happen with async transfers, or with the
packet descriptor table for isochronous transfers.
To prevent the MM subsystem from complaining about these bad
allocation requests, add the __GFP_NOWARN flag to the kmalloc calls
for these buffers.
CC: Andrew Morton <akpm@linux-foundation.org>
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+882a85c0c8ec4a3e2281@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210518201835.GA1140918@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 746e4acf87bcacf1406e05ef24a0b7139147c63e upstream.
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the set-speed request which erroneously used USB_DIR_IN and update
the default timeout argument to match (same value).
Fixes: 5638e4d92e77 ("USB: add PlayStation 2 Trance Vibrator driver")
Cc: stable@vger.kernel.org # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210521133109.17396-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dcb4b8ad6a448532d8b681b5d1a7036210b622de upstream.
uss720_probe forgets to decrease the refcount of usbdev in uss720_probe.
Fix this by decreasing the refcount of usbdev by usb_put_dev.
BUG: memory leak
unreferenced object 0xffff888101113800 (size 2048):
comm "kworker/0:1", pid 7, jiffies 4294956777 (age 28.870s)
hex dump (first 32 bytes):
ff ff ff ff 31 00 00 00 00 00 00 00 00 00 00 00 ....1...........
00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 ................
backtrace:
[<ffffffff82b8e822>] kmalloc include/linux/slab.h:554 [inline]
[<ffffffff82b8e822>] kzalloc include/linux/slab.h:684 [inline]
[<ffffffff82b8e822>] usb_alloc_dev+0x32/0x450 drivers/usb/core/usb.c:582
[<ffffffff82b98441>] hub_port_connect drivers/usb/core/hub.c:5129 [inline]
[<ffffffff82b98441>] hub_port_connect_change drivers/usb/core/hub.c:5363 [inline]
[<ffffffff82b98441>] port_event drivers/usb/core/hub.c:5509 [inline]
[<ffffffff82b98441>] hub_event+0x1171/0x20c0 drivers/usb/core/hub.c:5591
[<ffffffff81259229>] process_one_work+0x2c9/0x600 kernel/workqueue.c:2275
[<ffffffff81259b19>] worker_thread+0x59/0x5d0 kernel/workqueue.c:2421
[<ffffffff81261228>] kthread+0x178/0x1b0 kernel/kthread.c:292
[<ffffffff8100227f>] ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
Fixes: 0f36163d3abe ("[PATCH] usb: fix uss720 schedule with interrupts off")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+636c58f40a86b4a879e7@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210514124348.6587-1-mudongliangabcd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8460f6003a1d2633737b89c4f69d6f4c0c7c65a3 upstream.
gcc-11 now warns about a confusingly indented code block:
drivers/usb/host/sl811-hcd.c: In function ‘sl811h_hub_control’:
drivers/usb/host/sl811-hcd.c:1291:9: error: this ‘if’ clause does not guard... [-Werror=misleading-indentation]
1291 | if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
| ^~
drivers/usb/host/sl811-hcd.c:1295:17: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
1295 | break;
Rewrite this to use a single if() block with the __is_defined() macro.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210322164244.827589-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
