summaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)Author
2022-05-18usb: gadget: uvc: allow for application to cleanly shutdownDan Vacura
commit b81ac4395bbeaf36e078dea1a48c02dd97b76235 upstream. Several types of kernel panics can occur due to timing during the uvc gadget removal. This appears to be a problem with gadget resources being managed by both the client application's v4l2 open/close and the UDC gadget bind/unbind. Since the concept of USB_GADGET_DELAYED_STATUS doesn't exist for unbind, add a wait to allow for the application to close out. Some examples of the panics that can occur are: <1>[ 1147.652313] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 <4>[ 1147.652510] Call trace: <4>[ 1147.652514] usb_gadget_disconnect+0x74/0x1f0 <4>[ 1147.652516] usb_gadget_deactivate+0x38/0x168 <4>[ 1147.652520] usb_function_deactivate+0x54/0x90 <4>[ 1147.652524] uvc_function_disconnect+0x14/0x38 <4>[ 1147.652527] uvc_v4l2_release+0x34/0xa0 <4>[ 1147.652537] __fput+0xdc/0x2c0 <4>[ 1147.652540] ____fput+0x10/0x1c <4>[ 1147.652545] task_work_run+0xe4/0x12c <4>[ 1147.652549] do_notify_resume+0x108/0x168 <1>[ 282.950561][ T1472] Unable to handle kernel NULL pointer dereference at virtual address 00000000000005b8 <6>[ 282.953111][ T1472] Call trace: <6>[ 282.953121][ T1472] usb_function_deactivate+0x54/0xd4 <6>[ 282.953134][ T1472] uvc_v4l2_release+0xac/0x1e4 <6>[ 282.953145][ T1472] v4l2_release+0x134/0x1f0 <6>[ 282.953167][ T1472] __fput+0xf4/0x428 <6>[ 282.953178][ T1472] ____fput+0x14/0x24 <6>[ 282.953193][ T1472] task_work_run+0xac/0x130 <3>[ 213.410077][ T29] configfs-gadget gadget: uvc: Failed to queue request (-108). <1>[ 213.410116][ T29] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000003 <6>[ 213.413460][ T29] Call trace: <6>[ 213.413474][ T29] uvcg_video_pump+0x1f0/0x384 <6>[ 213.413489][ T29] process_one_work+0x2a4/0x544 <6>[ 213.413502][ T29] worker_thread+0x350/0x784 <6>[ 213.413515][ T29] kthread+0x2ac/0x320 <6>[ 213.413528][ T29] ret_from_fork+0x10/0x30 Signed-off-by: Dan Vacura <w36195@motorola.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220503201039.71720-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18usb: gadget: uvc: rename function to be more consistentMichael Tretter
commit e6bab2b66329b40462fb1bed6f98bc3fcf543a1c upstream. When enabling info debugging for the uvc gadget, the bind and unbind infos use different formats. Change the unbind to visually match the bind. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20211017215017.18392-3-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: option: add Fibocom MA510 modemSven Schwermer
commit 07989eb981d862f7f2be68d233d753f2e7ccc119 upstream. The MA510 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the following interfaces, respectively: 30: Diag + QDSS + Modem + RMNET 31: Diag + Modem + AT + ECM 32: Modem + AT + ECM The first configuration (30) reuses u-blox R410M's VID/PID with identical interface configuration. A detailed description of the USB configuration for each mode follows: +GTUSBMODE: 30 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=90b2 Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 31 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0106 Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 32 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=010a Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: option: add Fibocom L610 modemSven Schwermer
commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream. The L610 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the following interfaces, respectively: 31: Modem + NV + MOS + Diag + LOG + AT + AT 32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT 33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT A detailed description of the USB configuration for each mode follows: +GTUSBMODE: 31 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d10 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 32 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d11 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 33 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d11 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: qcserial: add support for Sierra Wireless EM7590Ethan Yang
commit 870b1eee2d844727b06e238c121d260bc5645580 upstream. Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions. Signed-off-by: Ethan Yang <etyang@sierrawireless.com> Link: https://lore.kernel.org/r/20220425055840.5693-1-etyang@sierrawireless.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18USB: serial: pl2303: add device id for HP LM930 DisplayScott Chen
commit 26a08f8bad3e1f98d3153f939fb8cd330da4cb26 upstream. Add the device id for the HPLM930Display which is a PL2303GC based device. Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18usb: typec: tcpci_mt6360: Update for BMC PHY settingChiYuan Huang
commit 4031cd95cba70c72e4cadc2d46624bcd31e5a6c0 upstream. Update MT6360 BMC PHY Tx/Rx setting for the compatibility. Macpaul reported this CtoDP cable attention message cannot be received from MT6360 TCPC. But actually, attention message really sent from UFP_D device. After RD's comment, there may be BMC PHY Tx/Rx setting causes this issue. Below's the detailed TCPM log and DP attention message didn't received from 6360 TCPCI. [ 1206.367775] Identity: 0000:0000.0000 [ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405 [ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start [ 1206.447383] PD TX, header: 0x1d6f [ 1206.449393] PD TX complete, status: 0 [ 1206.454110] PD RX, header: 0x184f [1] [ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1 [ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished [ 1206.456873] cc:=4 [ 1206.473100] AMS STRUCTURED_VDMS start [ 1206.473103] PD TX, header: 0x2f6f [ 1206.475397] PD TX complete, status: 0 [ 1206.480442] PD RX, header: 0x2a4f [1] [ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2 [ 1206.483150] AMS STRUCTURED_VDMS finished [ 1206.483151] cc:=4 [ 1206.505643] AMS STRUCTURED_VDMS start [ 1206.505646] PD TX, header: 0x216f [ 1206.507933] PD TX complete, status: 0 [ 1206.512664] PD RX, header: 0x1c4f [1] [ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1 [ 1206.515460] AMS STRUCTURED_VDMS finished [ 1206.515461] cc:=4 Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360 Type-C driver") Cc: stable <stable@vger.kernel.org> Reported-by: Macpaul Lin <macpaul.lin@mediatek.com> Tested-by: Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/1652159580-30959-1-git-send-email-u0084500@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18usb: typec: tcpci: Don't skip cleanup in .remove() on errorUwe Kleine-König
commit bbc126ae381cf0a27822c1f822d0aeed74cc40d9 upstream. Returning an error value in an i2c remove callback results in an error message being emitted by the i2c core, but otherwise it doesn't make a difference. The device goes away anyhow and the devm cleanups are called. In this case the remove callback even returns early without stopping the tcpm worker thread and various timers. A work scheduled on the work queue, or a firing timer after tcpci_remove() returned probably results in a use-after-free situation because the regmap and driver data were freed. So better make sure that tcpci_unregister_port() is called even if disabling the irq failed. Also emit a more specific error message instead of the i2c core's "remove failed (EIO), will be ignored" and return 0 to suppress the core's warning. This patch is (also) a preparation for making i2c remove callbacks return void. Fixes: 3ba76256fc4e ("usb: typec: tcpci: mask event interrupts when remove driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable <stable@vger.kernel.org> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220502080456.21568-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18usb: cdc-wdm: fix reading stuck on device closeSergey Ryazanov
commit 01e01f5c89773c600a9f0b32c888de0146066c3a upstream. cdc-wdm tracks whether a response reading request is in-progress and blocks the next request from being sent until the previous request is completed. As soon as last user closes the cdc-wdm device file, the driver cancels any ongoing requests, resets the pending response counter, but leaves the response reading in-progress flag (WDM_RESPONDING) untouched. So if the user closes the device file during the response receive request is being performed, no more data will be obtained from the modem. The request will be cancelled, effectively preventing the WDM_RESPONDING flag from being reseted. Keeping the flag set will prevent a new response receive request from being sent, permanently blocking the read path. The read path will staying blocked until the module will be reloaded or till the modem will be re-attached. This stuck has been observed with a Huawei E3372 modem attached to an OpenWrt router and using the comgt utility to set up a network connection. Fix this issue by clearing the WDM_RESPONDING flag on the device file close. Without this fix, the device reading stuck can be easily reproduced in a few connection establishing attempts. With this fix, a load test for modem connection re-establishing worked for several hours without any issues. Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device") Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09USB: Fix xhci event ring dequeue pointer ERDP update issueWeitao Wang
[ Upstream commit e91ac20889d1a26d077cc511365cd7ff4346a6f3 ] In some situations software handles TRB events slower than adding TRBs. If the number of TRB events to be processed in a given interrupt is exactly the same as the event ring size 256, then the local variable "event_ring_deq" that holds the initial dequeue position is equal to software_dequeue after handling all 256 interrupts. It will cause driver to not update ERDP to hardware, Software dequeue pointer is out of sync with ERDP on interrupt exit. On the next interrupt, the event ring may full but driver will not update ERDP as software_dequeue is equal to ERDP. [ 536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37 [ 566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT [ 566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00 [ 572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command. [ 572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110 [ 572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead [ 572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD [ 572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00 [ 572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD Hardware ERDP is updated mid event handling if there are more than 128 events in an interrupt (half of ring size). Fix this by updating the software local variable at the same time as hardware ERDP. [commit message rewording -Mathias] Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose") Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09usb: phy: generic: Get the vbus supplySean Anderson
commit 03e607cbb2931374db1825f371e9c7f28526d3f4 upstream. While support for working with a vbus was added, the regulator was never actually gotten (despite what was documented). Fix this by actually getting the supply from the device tree. Fixes: 7acc9973e3c4 ("usb: phy: generic: add vbus support") Cc: stable <stable@kernel.org> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220425171412.1188485-3-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: cdns3: Fix issue for clear halt endpointPawel Laszczak
commit b3fa25de31fb7e9afebe9599b8ff32eda13d7c94 upstream. Path fixes bug which occurs during resetting endpoint in __cdns3_gadget_ep_clear_halt function. During resetting endpoint controller will change HW/DMA owned TRB. It set Abort flag in trb->control and will change trb->length field. If driver want to use the aborted trb it must update the changed field in TRB. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220329084605.4022-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: dwc3: gadget: Return proper request statusThinh Nguyen
commit c7428dbddcf4ea1919e1c8e15f715b94ca359268 upstream. If the user sets the usb_request's no_interrupt, then there will be no completion event for the request. Currently the driver incorrectly uses the event status of a different request to report the status for a request with no_interrupt. The dwc3 driver needs to check the TRB status associated with the request when reporting its status. Note: this is only applicable to missed_isoc TRB completion status, but the other status are also listed for completeness/documentation. Fixes: 6d8a019614f3 ("usb: dwc3: gadget: check for Missed Isoc from event status") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/db2c80108286cfd108adb05bad52138b78d7c3a7.1650673655.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: dwc3: core: Only handle soft-reset in DCTLThinh Nguyen
commit f4fd84ae0765a80494b28c43b756a95100351a94 upstream. Make sure not to set run_stop bit or link state change request while initiating soft-reset. Register read-modify-write operation may unintentionally start the controller before the initialization completes with its previous DCTL value, which can cause initialization failure. Fixes: f59dcab17629 ("usb: dwc3: core: improve reset sequence") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/6aecbd78328f102003d40ccf18ceeebd411d3703.1650594792.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: dwc3: core: Fix tx/rx threshold settingsThinh Nguyen
commit f28ad9069363dec7deb88032b70612755eed9ee6 upstream. The current driver logic checks against 0 to determine whether the periodic tx/rx threshold settings are set, but we may get bogus values from uninitialized variables if no device property is set. Properly default these variables to 0. Fixes: 938a5ad1d305 ("usb: dwc3: Check for ESS TX/RX threshold config") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/cccfce990b11b730b0dae42f9d217dc6fb988c90.1649727139.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: dwc3: Try usb-role-switch first in dwc3_drd_initSven Peter
commit ab7aa2866d295438dc60522f85c5421c6b4f1507 upstream. If the PHY controller node has a "port" dwc3 tries to find an extcon device even when "usb-role-switch" is present. This happens because dwc3_get_extcon() sees that "port" node and then calls extcon_find_edev_by_node() which will always return EPROBE_DEFER in that case. On the other hand, even if an extcon was present and dwc3_get_extcon() was successful it would still be ignored in favor of "usb-role-switch". Let's just first check if "usb-role-switch" is configured in the device tree and directly use it instead and only try to look for an extcon device otherwise. Fixes: 8a0a13799744 ("usb: dwc3: Registering a role switch in the DRD code.") Cc: stable <stable@kernel.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220411155300.9766-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()Vijayavardhan Vennapusa
commit bf95c4d4630c7a2c16e7b424fdea5177d9ce0864 upstream. If any function like UVC is deactivating gadget as part of composition switch which results in not calling pullup enablement, it is not getting enabled after switch to new composition due to this deactivation flag not cleared. This results in USB enumeration not happening after switch to new USB composition. Hence clear deactivation flag inside gadget structure in configfs_composite_unbind() before switch to new USB composition. Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org> Signed-off-by: Dan Vacura <w36195@motorola.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220413211038.72797-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: gadget: uvc: Fix crash when encoding data for usb requestDan Vacura
commit 71d471e3faf90c9674cadc7605ac719e82cb7fac upstream. During the uvcg_video_pump() process, if an error occurs and uvcg_queue_cancel() is called, the buffer queue will be cleared out, but the current marker (queue->buf_used) of the active buffer (no longer active) is not reset. On the next iteration of uvcg_video_pump() the stale buf_used count will be used and the logic of min((unsigned int)len, buf->bytesused - queue->buf_used) may incorrectly calculate a nbytes size, causing an invalid memory access. [80802.185460][ T315] configfs-gadget gadget: uvc: VS request completed with status -18. [80802.185519][ T315] configfs-gadget gadget: uvc: VS request completed with status -18. ... uvcg_queue_cancel() is called and the queue is cleared out, but the marker queue->buf_used is not reset. ... [80802.262328][ T8682] Unable to handle kernel paging request at virtual address ffffffc03af9f000 ... ... [80802.263138][ T8682] Call trace: [80802.263146][ T8682] __memcpy+0x12c/0x180 [80802.263155][ T8682] uvcg_video_pump+0xcc/0x1e0 [80802.263165][ T8682] process_one_work+0x2cc/0x568 [80802.263173][ T8682] worker_thread+0x28c/0x518 [80802.263181][ T8682] kthread+0x160/0x170 [80802.263188][ T8682] ret_from_fork+0x10/0x18 [80802.263198][ T8682] Code: a8c12829 a88130cb a8c130 Fixes: d692522577c0 ("usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20220331184024.23918-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: typec: ucsi: Fix role swappingHeikki Krogerus
commit eb5d7ff3cf0d55093c619b5ad107cd5c05ce8134 upstream. All attempts to swap the roles timed out because the completion was done without releasing the port lock. Fixing that by releasing the lock before starting to wait for the completion. Link: https://lore.kernel.org/linux-usb/037de7ac-e210-bdf5-ec7a-8c0c88a0be20@gmail.com/ Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes") Cc: stable@vger.kernel.org Reported-and-tested-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220405134824.68067-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: typec: ucsi: Fix reuse of completion structureHeikki Krogerus
commit e25adcca917d7e4cdc1dc6444d0692ffda7594bf upstream. The role swapping completion variable is reused, so it needs to be reinitialised every time. Otherwise it will be marked as done after the first time it's used and completing immediately. Link: https://lore.kernel.org/linux-usb/20220325203959.GA19752@jackp-linux.qualcomm.com/ Fixes: 6df475f804e6 ("usb: typec: ucsi: Start using struct typec_operations") Cc: stable@vger.kernel.org Reported-and-suggested-by: Jack Pham <quic_jackp@quicinc.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220405134824.68067-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: misc: fix improper handling of refcount in uss720_probe()Hangyu Hua
commit 0a96fa640dc928da9eaa46a22c46521b037b78ad upstream. usb_put_dev shouldn't be called when uss720_probe succeeds because of priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL before destroy_priv in uss720_disconnect because usb_put_dev is in destroy_priv. Fix this by moving priv->usbdev = NULL after usb_put_dev. Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe") Cc: stable <stable@kernel.org> Reviewed-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220407024001.11761-1-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500msMathias Nyman
commit 33597f0c48be0836854d43c577e35c8f8a765a7d upstream. The first U3 wake signal by the host may be lost if the USB 3 connection is tunneled over USB4, with a runtime suspended USB4 host, and firmware implemented connection manager. Specs state the host must wait 100ms (tU3WakeupRetryDelay) before resending a U3 wake signal if device doesn't respond, leading to U3 -> U0 link transition times around 270ms in the tunneled case. Fixes: 0200b9f790b0 ("xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09xhci: stop polling roothubs after shutdownHenry Lin
commit dc92944a014cd6a6f6c94299aaa36164dd2c238a upstream. While rebooting, XHCI controller and its bus device will be shut down in order by .shutdown callback. Stopping roothubs polling in xhci_shutdown() can prevent XHCI driver from accessing port status after its bus device shutdown. Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs polling, XHCI driver may access PCIe BAR register for port status after parent PCIe root port driver is shutdown and cause PCIe bus error. [check shared hcd exist before stopping its roothub polling -Mathias] Cc: stable@vger.kernel.org Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09xhci: Enable runtime PM on second Alderlake controllerEvan Green
commit d8bfe5091d6cc4b8b8395e4666979ae72a6069ca upstream. Alderlake has two XHCI controllers with PCI IDs 0x461e and 0x51ed. We had previously added the quirk to default enable runtime PM for 0x461e, now add it for 0x51ed as well. Signed-off-by: Evan Green <evgreen@chromium.org> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220408114225.1.Ibcff6b86ed4eacfe4c4bc89c90e18416f3900a3e@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositionsDaniele Palmas
commit f32c5a0423400e01f4d7c607949fa3a1f006e8fa upstream. Add support for the following Telit FN980 and FN990 compositions: 0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty 0x1058: tty, adb, tty, tty, tty, tty, tty 0x1075: adb, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20220406141408.580669-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09USB: serial: option: add support for Cinterion MV32-WA/MV32-WBSlark Xiao
commit b4a64ed6e7b857317070fcb9d87ff5d4a73be3e8 upstream. Add support for Cinterion device MV32-WA/MV32-WB. MV32-WA PID is 0x00F1, and MV32-WB PID is 0x00F2. Test evidence as below: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00f1 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F1 USB Mobile Broadband S: SerialNumber=78ada8c4 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00f2 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F2 USB Mobile Broadband S: SerialNumber=cdd06a78 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Interface 0&1: MBIM, 2:Modem, 3: GNSS, 4: NMEA, 5: Diag GNSS port don't use serial driver. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220414074434.5699-1-slark_xiao@163.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09USB: serial: cp210x: add PIDs for Kamstrup USB Meter ReaderBruno Thomsen
commit 35a923a0b329c343e9e81d79518e2937eba06fcd upstream. Wireless reading of water and heat meters using 868 MHz wM-Bus mode C1. The two different product IDs allow detection of dongle antenna solution: - Internal antenna - External antenna using SMA connector https://www.kamstrup.com/en-en/water-solutions/water-meter-reading/usb-meter-reader Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20220414081202.5591-1-bruno.thomsen@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTSKees Cook
commit e23e50e7acc8d8f16498e9c129db33e6a00e80eb upstream. The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n due to "-mabi=apcs-gnu", even though it has a single u8: whiteheat_private { __u8 mcr; /* 0 1 */ /* size: 4, cachelines: 1, members: 1 */ /* padding: 3 */ /* last cacheline: 4 bytes */ }; The result is technically harmless, as both the source and the destinations are currently the same allocation size (4 bytes) and don't use their padding, but if anything were to ever be added after the "mcr" member in "struct whiteheat_private", it would be overwritten. The structs both have a single u8 "mcr" member, but are 4 bytes in padded size. The memcpy() destination was explicitly targeting the u8 member (size 1) with the length of the whole structure (size 4), triggering the memcpy buffer overflow warning: In file included from include/linux/string.h:253, from include/linux/bitmap.h:11, from include/linux/cpumask.h:12, from include/linux/smp.h:13, from include/linux/lockdep.h:14, from include/linux/spinlock.h:62, from include/linux/mmzone.h:8, from include/linux/gfp.h:6, from include/linux/slab.h:15, from drivers/usb/serial/whiteheat.c:17: In function 'fortify_memcpy_chk', inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4: include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 328 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Instead, just assign the one byte directly. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/202204142318.vDqjjSFn-lkp@intel.com Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220421001234.2421107-1-keescook@chromium.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09USB: quirks: add STRING quirk for VCOM deviceOliver Neukum
commit ec547af8a9ea6441864bad34172676b5652ceb96 upstream. This has been reported to stall if queried Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09USB: quirks: add a Realtek card readerOliver Neukum
commit 2a7ccf6bb6f147f64c025ad68f4255d8e1e0ce6d upstream. This device is reported to stall when enummerated. Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09usb: mtu3: fix USB 3.0 dual-role-switch from device to hostMacpaul Lin
commit 456244aeecd54249096362a173dfe06b82a5cafa upstream. Issue description: When an OTG port has been switched to device role and then switch back to host role again, the USB 3.0 Host (XHCI) will not be able to detect "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed) devices until system reboot. Root cause and Solution: There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in toggle_opstate(). At the end of role switch procedure, toggle_opstate() will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN will be skipped hence caused the port cannot detect connected USB 2.0 (Highspeed and Fullspeed) devices. Simply remove the condition check to solve this issue. Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support") Cc: stable@vger.kernel.org Tested-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Tainping Fang <tianping.fang@mediatek.com> Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13usb: dwc3: omap: fix "unbalanced disables for smps10_out1" on omap5evmH. Nikolaus Schaller
[ Upstream commit ac01df343e5a6c6bcead2ed421af1fde30f73e7e ] Usually, the vbus_regulator (smps10 on omap5evm) boots up disabled. Hence calling regulator_disable() indirectly through dwc3_omap_set_mailbox() during probe leads to: [ 10.332764] WARNING: CPU: 0 PID: 1628 at drivers/regulator/core.c:2853 _regulator_disable+0x40/0x164 [ 10.351919] unbalanced disables for smps10_out1 [ 10.361298] Modules linked in: dwc3_omap(+) clk_twl6040 at24 gpio_twl6040 palmas_gpadc palmas_pwrbutton industrialio snd_soc_omap_mcbsp(+) snd_soc_ti_sdma display_connector ti_tpd12s015 drm leds_gpio drm_panel_orientation_quirks ip_tables x_tables ipv6 autofs4 [ 10.387818] CPU: 0 PID: 1628 Comm: systemd-udevd Not tainted 5.17.0-rc1-letux-lpae+ #8139 [ 10.405129] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 10.411455] unwind_backtrace from show_stack+0x10/0x14 [ 10.416970] show_stack from dump_stack_lvl+0x40/0x4c [ 10.422313] dump_stack_lvl from __warn+0xb8/0x170 [ 10.427377] __warn from warn_slowpath_fmt+0x70/0x9c [ 10.432595] warn_slowpath_fmt from _regulator_disable+0x40/0x164 [ 10.439037] _regulator_disable from regulator_disable+0x30/0x64 [ 10.445382] regulator_disable from dwc3_omap_set_mailbox+0x8c/0xf0 [dwc3_omap] [ 10.453116] dwc3_omap_set_mailbox [dwc3_omap] from dwc3_omap_probe+0x2b8/0x394 [dwc3_omap] [ 10.467021] dwc3_omap_probe [dwc3_omap] from platform_probe+0x58/0xa8 [ 10.481762] platform_probe from really_probe+0x168/0x2fc [ 10.481782] really_probe from __driver_probe_device+0xc4/0xd8 [ 10.481782] __driver_probe_device from driver_probe_device+0x24/0xa4 [ 10.503762] driver_probe_device from __driver_attach+0xc4/0xd8 [ 10.510018] __driver_attach from bus_for_each_dev+0x64/0xa0 [ 10.516001] bus_for_each_dev from bus_add_driver+0x148/0x1a4 [ 10.524880] bus_add_driver from driver_register+0xb4/0xf8 [ 10.530678] driver_register from do_one_initcall+0x90/0x1c4 [ 10.536661] do_one_initcall from do_init_module+0x4c/0x200 [ 10.536683] do_init_module from load_module+0x13dc/0x1910 [ 10.551159] load_module from sys_finit_module+0xc8/0xd8 [ 10.561319] sys_finit_module from __sys_trace_return+0x0/0x18 [ 10.561336] Exception stack(0xc344bfa8 to 0xc344bff0) [ 10.561341] bfa0: b6fb5778 b6fab8d8 00000007 b6ecfbb8 00000000 b6ed0398 [ 10.561341] bfc0: b6fb5778 b6fab8d8 855c0500 0000017b 00020000 b6f9a3cc 00000000 b6fb5778 [ 10.595500] bfe0: bede18f8 bede18e8 b6ec9aeb b6dda1c2 [ 10.601345] ---[ end trace 0000000000000000 ]--- Fix this unnecessary warning by checking if the regulator is enabled. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/af3b750dc2265d875deaabcf5f80098c9645da45.1646744616.git.hns@goldelico.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13usb: ehci: add pci device support for Aspeed platformsNeal Liu
[ Upstream commit c3c9cee592828528fd228b01d312c7526c584a42 ] Enable Aspeed quirks in commit 7f2d73788d90 ("usb: ehci: handshake CMD_RUN instead of STS_HALT") to support Aspeed ehci-pci device. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> Link: https://lore.kernel.org/r/20220208101657.76459-1-neal_liu@aspeedtech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13usb: gadget: tegra-xudc: Fix control endpoint's definitionsWayne Chang
[ Upstream commit 7bd42fb95eb4f98495ccadf467ad15124208ec49 ] According to the Tegra Technical Reference Manual, the seq_num field of control endpoint is not [31:24] but [31:27]. Bit 24 is reserved and bit 26 is splitxstate. The change fixes the wrong control endpoint's definitions. Signed-off-by: Wayne Chang <waynec@nvidia.com> Link: https://lore.kernel.org/r/20220107091349.149798-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13usb: gadget: tegra-xudc: Do not program SPARAMWayne Chang
[ Upstream commit 62fb61580eb48fc890b7bc9fb5fd263367baeca8 ] According to the Tegra Technical Reference Manual, SPARAM is a read-only register and should not be programmed in the driver. The change removes the wrong SPARAM usage. Signed-off-by: Wayne Chang <waynec@nvidia.com> Link: https://lore.kernel.org/r/20220107090443.149021-1-waynec@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08USB: storage: ums-realtek: fix error code in rts51x_read_mem()Dan Carpenter
[ Upstream commit b07cabb8361dc692522538205552b1b9dab134be ] The rts51x_read_mem() function should return negative error codes. Currently if the kmalloc() fails it returns USB_STOR_TRANSPORT_ERROR (3) which is treated as success by the callers. Fixes: 065e60964e29 ("ums_realtek: do not use stack memory for DMA") Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220304073504.GA26464@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08xhci: fix uninitialized string returned by xhci_decode_ctrl_ctx()Anssi Hannula
commit 05519b8589a679edb8fa781259893d20bece04ad upstream. xhci_decode_ctrl_ctx() returns the untouched buffer as-is if both "drop" and "add" parameters are zero. Fix the function to return an empty string in that case. It was not immediately clear from the possible call chains whether this issue is currently actually triggerable or not. Note that before commit 4843b4b5ec64 ("xhci: fix even more unsafe memory usage in xhci tracing") the result effect in the failure case was different as a static buffer was used here, but the code still worked incorrectly. Fixes: 90d6d5731da7 ("xhci: Add tracing for input control context") Cc: stable@vger.kernel.org Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> commit 4843b4b5ec64 ("xhci: fix even more unsafe memory usage in xhci tracing") Link: https://lore.kernel.org/r/20220303110903.1662404-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08xhci: make xhci_handshake timeout for xhci_reset() adjustableMathias Nyman
commit 14073ce951b5919da450022c050772902f24f054 upstream. xhci_reset() timeout was increased from 250ms to 10 seconds in order to give Renesas 720201 xHC enough time to get ready in probe. xhci_reset() is called with interrupts disabled in other places, and waiting for 10 seconds there is not acceptable. Add a timeout parameter to xhci_reset(), and adjust it back to 250ms when called from xhci_stop() or xhci_shutdown() where interrupts are disabled, and successful reset isn't that critical. This solves issues when deactivating host mode on platforms like SM8450. For now don't change the timeout if xHC is reset in xhci_resume(). No issues are reported for it, and we need the reset to succeed. Locking around that reset needs to be revisited later. Additionally change the signed integer timeout parameter in xhci_handshake() to a u64 to match the timeout value we pass to readl_poll_timeout_atomic() Fixes: 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.") Cc: stable@vger.kernel.org Reported-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Tested-by: Pavan Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08xhci: fix runtime PM imbalance in USB2 resumeHenry Lin
commit 70c05e4cf63054cd755ca66c1819327b22cb085f upstream. A race between system resume and device-initiated resume may result in runtime PM imbalance on USB2 root hub. If a device-initiated resume starts and system resume xhci_bus_resume() directs U0 before hub driver sees the resuming device in RESUME state, device-initiated resume will not be finished in xhci_handle_usb2_port_link_resume(). In this case, usb_hcd_end_port_resume() call is missing. This changes calls usb_hcd_end_port_resume() if resuming device reaches U0 to keep runtime PM balance. Fixes: a231ec41e6f6 ("xhci: refactor U0 link state handling in get_port_status") Cc: stable@vger.kernel.org Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08xhci: fix garbage USBSTS being logged in some casesAnssi Hannula
commit 3105bc977d7cbf2edc35e24cc7e009686f6e4a56 upstream. xhci_decode_usbsts() is expected to return a zero-terminated string by its only caller, xhci_stop_endpoint_command_watchdog(), which directly logs the return value: xhci_warn(xhci, "USBSTS:%s\n", xhci_decode_usbsts(str, usbsts)); However, if no recognized bits are set in usbsts, the function will return without having called any sprintf() and therefore return an untouched non-zero-terminated caller-provided buffer, causing garbage to be output to log. Fix that by always including the raw value in the output. Note that before commit 4843b4b5ec64 ("xhci: fix even more unsafe memory usage in xhci tracing") the result effect in the failure case was different as a static buffer was used here, but the code still worked incorrectly. Fixes: 9c1aa36efdae ("xhci: Show host status when watchdog triggers and host is assumed dead.") Cc: stable@vger.kernel.org Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220303110903.1662404-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.cAlan Stern
commit 1892bf90677abcad7f06e897e308f5c3e3618dd4 upstream. The kernel test robot found a problem with the ene_ub6250 subdriver in usb-storage: It uses structures containing bitfields to represent hardware bits in its SD_STATUS, MS_STATUS, and SM_STATUS bytes. This is not safe; it presumes a particular bit ordering and it assumes the compiler will not insert padding, neither of which is guaranteed. This patch fixes the problem by changing the structures to simple u8 values, with the bitfields replaced by bitmask constants. CC: <stable@vger.kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YjOcbuU106UpJ/V8@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08USB: serial: simple: add Nokia phone driverJohan Hovold
commit c4b9c570965f75d0d55e639747f1e5ccdad2fae0 upstream. Add a new "simple" driver for certain Nokia phones, including Nokia 130 (RM-1035) which exposes two serial ports in "charging only" mode: Bus 001 Device 009: ID 0421:069a Nokia Mobile Phones 130 [RM-1035] (Charging only) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0421 Nokia Mobile Phones idProduct 0x069a 130 [RM-1035] (Charging only) bcdDevice 1.00 iManufacturer 1 Nokia iProduct 2 Nokia 130 (RM-1035) iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220228084919.10656-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08USB: serial: pl2303: add IBM device IDsEddie James
commit e1d15646565b284e9ef2433234d6cfdaf66695f1 upstream. IBM manufactures a PL2303 device for UPS communications. Add the vendor and product IDs so that the PL2303 driver binds to the device. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20220301224446.21236-1-eajames@linux.ibm.com Cc: stable@vger.kernel.org [ johan: amend the SoB chain ] Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-23usb: usbtmc: Fix bug in pipe direction for control transfersAlan Stern
commit e9b667a82cdcfe21d590344447d65daed52b353b upstream. The syzbot fuzzer reported a minor bug in the usbtmc driver: usb 5-1: BOGUS control dir, pipe 80001e80 doesn't match bRequestType 0 WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412 usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410 Modules linked in: CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0 ... Call Trace: <TASK> usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline] The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for all of its transfers, whether they are in or out. It's easy to fix. CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+a48e3d1a875240cab5de@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YiEsYTPEE6lOCOA5@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-23usb: gadget: Fix use-after-free bug by not setting udc->dev.driverAlan Stern
commit 16b1941eac2bd499f065a6739a40ce0011a3d740 upstream. The syzbot fuzzer found a use-after-free bug: BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320 Read of size 8 at addr ffff88802b934098 by task udevd/3689 CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 dev_uevent+0x712/0x780 drivers/base/core.c:2320 uevent_show+0x1b8/0x380 drivers/base/core.c:2391 dev_attr_show+0x4b/0x90 drivers/base/core.c:2094 Although the bug manifested in the driver core, the real cause was a race with the gadget core. dev_uevent() does: if (dev->driver) add_uevent_var(env, "DRIVER=%s", dev->driver->name); and between the test and the dereference of dev->driver, the gadget core sets dev->driver to NULL. The race wouldn't occur if the gadget core registered its devices on a real bus, using the standard synchronization techniques of the driver core. However, it's not necessary to make such a large change in order to fix this bug; all we need to do is make sure that udc->dev.driver is always NULL. In fact, there is no reason for udc->dev.driver ever to be set to anything, let alone to the value it currently gets: the address of the gadget's driver. After all, a gadget driver only knows how to manage a gadget, not how to manage a UDC. This patch simply removes the statements in the gadget core that touch udc->dev.driver. Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class") CC: <stable@vger.kernel.org> Reported-and-tested-by: syzbot+348b571beb5eeb70a582@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YiQgukfFFbBnwJ/9@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-23usb: gadget: rndis: prevent integer overflow in rndis_set_response()Dan Carpenter
commit 65f3324f4b6fed78b8761c3b74615ecf0ffa81fa upstream. If "BufOffset" is very large the "BufOffset + 8" operation can have an integer overflow. Cc: stable@kernel.org Fixes: 38ea1eac7d88 ("usb: gadget: rndis: check size of RNDIS_MSG_SET command") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220301080424.GA17208@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08usb: gadget: clear related members when goto failHangyu Hua
commit 501e38a5531efbd77d5c73c0ba838a889bfc1d74 upstream. dev->config and dev->hs_config and dev->dev need to be cleaned if dev_config fails to avoid UAF. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20211231172138.7993-3-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08usb: gadget: don't release an existing dev->bufHangyu Hua
commit 89f3594d0de58e8a57d92d497dea9fee3d4b9cda upstream. dev->buf does not need to be released if it already exists before executing dev_config. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20211231172138.7993-2-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02xhci: Prevent futile URB re-submissions due to incorrect return value.Hongyu Xie
commit 243a1dd7ba48c120986dd9e66fee74bcb7751034 upstream. The -ENODEV return value from xhci_check_args() is incorrectly changed to -EINVAL in a couple places before propagated further. xhci_check_args() returns 4 types of value, -ENODEV, -EINVAL, 1 and 0. xhci_urb_enqueue and xhci_check_streams_endpoint return -EINVAL if the return value of xhci_check_args <= 0. This causes problems for example r8152_submit_rx, calling usb_submit_urb in drivers/net/usb/r8152.c. r8152_submit_rx will never get -ENODEV after submiting an urb when xHC is halted because xhci_urb_enqueue returns -EINVAL in the very beginning. [commit message and header edit -Mathias] Fixes: 203a86613fb3 ("xhci: Avoid NULL pointer deref when host dies.") Cc: stable@vger.kernel.org Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-02xhci: re-initialize the HC during resume if HCE was setPuma Hsu
commit 8b328f8002bcf29ef517ee4bf234e09aabec4d2e upstream. When HCE(Host Controller Error) is set, it means an internal error condition has been detected. Software needs to re-initialize the HC, so add this check in xhci resume. Cc: stable@vger.kernel.org Signed-off-by: Puma Hsu <pumahsu@google.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220215123320.1253947-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 20:43:55 +0000