summaryrefslogtreecommitdiff
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2022-06-14watchdog: wdat_wdt: Stop watchdog when rebooting the systemLiu Xinpeng
[ Upstream commit 27fdf84510a1374748904db43f6755f912736d92 ] Executing reboot command several times on the machine "Dell PowerEdge R740", UEFI security detection stopped machine with the following prompt: UEFI0082: The system was reset due to a timeout from the watchdog timer. Check the System Event Log (SEL) or crash dumps from Operating Sysstem to identify the source that triggered the watchdog timer reset. Update the firmware or driver for the identified device. iDRAC has warning event: "The watchdog timer reset the system". This patch fixes this issue by adding the reboot notifier. Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1650984810-6247-3-git-send-email-liuxp11@chinatelecom.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14watchdog: ts4800_wdt: Fix refcount leak in ts4800_wdt_probeMiaoqian Lin
[ Upstream commit 5d24df3d690809952528e7a19a43d84bc5b99d44 ] of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() in some error paths. Fixes: bf9006399939 ("watchdog: ts4800: add driver for TS-4800 watchdog") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220511114203.47420-1-linmq006@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ar7: fix kernel builds for compiler testJackie Liu
[ Upstream commit 28b7ee33a2122569ac065cad578bf23f50cc65c3 ] TI AR7 Watchdog Timer is only build for 32bit. Avoid error like: In file included from drivers/watchdog/ar7_wdt.c:29: ./arch/mips/include/asm/mach-ar7/ar7.h: In function ‘ar7_is_titan’: ./arch/mips/include/asm/mach-ar7/ar7.h:111:24: error: implicit declaration of function ‘KSEG1ADDR’; did you mean ‘CKSEG1ADDR’? [-Werror=implicit-function-declaration] 111 | return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) == | ^~~~~~~~~ | CKSEG1ADDR Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210907024904.4127611-1-liu.yun@linux.dev Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17watchdog: f71808e_wdt: fix inaccurate report in WDIOC_GETTIMEOUTAhmad Fatoum
[ Upstream commit 164483c735190775f29d0dcbac0363adc51a068d ] The fintek watchdog timer can configure timeouts of second granularity only up to 255 seconds. Beyond that, the timeout needs to be configured with minute granularity. WDIOC_GETTIMEOUT should report the actual timeout configured, not just echo back the timeout configured by the user. Do so. Fixes: 96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG") Suggested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Link: https://lore.kernel.org/r/5e17960fe8cc0e3cb2ba53de4730b75d9a0f33d5.1628525954.git-series.a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17watchdog: Fix OMAP watchdog early handlingWalter Stoll
[ Upstream commit cd004d8299f1dc6cfa6a4eea8f94cb45eaedf070 ] TI's implementation does not service the watchdog even if the kernel command line parameter omap_wdt.early_enable is set to 1. This patch fixes the issue. Signed-off-by: Walter Stoll <walter.stoll@duagon.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/88a8fe5229cd68fa0f1fd22f5d66666c1b7057a0.camel@duagon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-20watchdog: orion: use 0 for unset heartbeatChris Packham
commit bb914088bd8a91c382f54d469367b2e5508b5493 upstream. If the heartbeat module param is not specified we would get an error message watchdog: f1020300.watchdog: driver supplied timeout (4294967295) out of range watchdog: f1020300.watchdog: falling back to default timeout (171) This is because we were initialising heartbeat to -1. By removing the initialisation (thus letting the C run time initialise it to 0) we silence the warning message and the default timeout is still used. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200313031312.1485-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-08Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout"Greg Kroah-Hartman
This reverts commit f58ab0b02ee7b095e0cae4ba706caa86fff5557b which is commit cb011044e34c293e139570ce5c01aed66a34345c upstream. It is reported to cause problems with systems and probably should not have been backported in the first place :( Link: https://lore.kernel.org/r/20210803165108.4154cd52@endymion Reported-by: Jean Delvare <jdelvare@suse.de> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20watchdog: aspeed: fix hardware timeout calculationTao Ren
[ Upstream commit e7dc481c92060f9ce872878b0b7a08c24713a7e5 ] Fix hardware timeout calculation in aspeed_wdt_set_timeout function to ensure the reload value does not exceed the hardware limit. Fixes: efa859f7d786 ("watchdog: Add Aspeed watchdog driver") Reported-by: Amithash Prasad <amithash@fb.com> Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210417034249.5978-1-rentao.bupt@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20watchdog: iTCO_wdt: Account for rebooting on second timeoutJan Kiszka
[ Upstream commit cb011044e34c293e139570ce5c01aed66a34345c ] This was already attempted to fix via 1fccb73011ea: If the BIOS did not enable TCO SMIs, the timer definitely needs to trigger twice in order to cause a reboot. If TCO SMIs are on, as well as SMIs in general, we can continue to assume that the BIOS will perform a reboot on the first timeout. QEMU with its ICH9 and related BIOS falls into the former category, currently taking twice the configured timeout in order to reboot the machine. For iTCO version that fall under turn_SMI_watchdog_clear_off, this is also true and was currently only addressed for v1, irrespective of the turn_SMI_watchdog_clear_off value. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/0b8bb307-d08b-41b5-696c-305cdac6789c@siemens.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20watchdog: imx_sc_wdt: fix pretimeoutStefan Eichenberger
[ Upstream commit 854478a381078ee86ae2a7908a934b1ded399130 ] If the WDIOF_PRETIMEOUT flag is not set when registering the device the driver will not show the sysfs entries or register the default governor. By moving the registering after the decision whether pretimeout is supported this gets fixed. Signed-off-by: Stefan Eichenberger <eichest@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/20210519080311.142928-1-eichest@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20watchdog: Fix possible use-after-free by calling del_timer_sync()Zou Wei
[ Upstream commit d0212f095ab56672f6f36aabc605bda205e1e0bf ] This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://lore.kernel.org/r/1620802676-19701-1-git-send-email-zou_wei@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20watchdog: sc520_wdt: Fix possible use-after-free in wdt_turnoff()Zou Wei
[ Upstream commit 90b7c141132244e8e49a34a4c1e445cce33e07f4 ] This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1620716691-108460-1-git-send-email-zou_wei@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20watchdog: Fix possible use-after-free in wdt_startup()Zou Wei
[ Upstream commit c08a6b31e4917034f0ed0cb457c3bb209576f542 ] This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1620716495-108352-1-git-send-email-zou_wei@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04watchdog: mei_wdt: request stop on unregisterAlexander Usyskin
commit 740c0a57b8f1e36301218bf549f3c9cc833a60be upstream. The MEI bus has a special behavior on suspend it destroys all the attached devices, this is due to the fact that also firmware context is not persistent across power flows. If watchdog on MEI bus is ticking before suspending the firmware times out and reports that the OS is missing watchdog tick. Send the stop command to the firmware on watchdog unregistered to eliminate the false event on suspend. This does not make the things worse from the user-space perspective as a user-space should re-open watchdog device after suspending before this patch. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210124114938.373885-1-tomas.winkler@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04watchdog: qcom: Remove incorrect usage of QCOM_WDT_ENABLE_IRQSai Prakash Ranjan
commit a4f3407c41605d14f09e490045d0609990cd5d94 upstream. As per register documentation, QCOM_WDT_ENABLE_IRQ which is BIT(1) of watchdog control register is wakeup interrupt enable bit and not related to bark interrupt at all, BIT(0) is used for that. So remove incorrect usage of this bit when supporting bark irq for pre-timeout notification. Currently with this bit set and bark interrupt specified, pre-timeout notification and/or watchdog reset/bite does not occur. Fixes: 36375491a439 ("watchdog: qcom: support pre-timeout when the bark irq is available") Cc: stable@vger.kernel.org Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210126150241.10009-1-saiprakash.ranjan@codeaurora.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-30watchdog: coh901327: add COMMON_CLK dependencyArnd Bergmann
[ Upstream commit 36c47df85ee8e1f8a35366ac11324f8875de00eb ] clang produces a build failure in configurations without COMMON_CLK when a timeout calculation goes wrong: arm-linux-gnueabi-ld: drivers/watchdog/coh901327_wdt.o: in function `coh901327_enable': coh901327_wdt.c:(.text+0x50): undefined reference to `__bad_udelay' Add a Kconfig dependency to only do build testing when COMMON_CLK is enabled. Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201203223358.1269372-1-arnd@kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30watchdog: qcom: Avoid context switch in restart handlerManivannan Sadhasivam
[ Upstream commit 7948fab26bcc468aa2a76462f441291b5fb0d5c7 ] The use of msleep() in the restart handler will cause scheduler to induce a context switch which is not desirable. This generates below warning on SDX55 when WDT is the only available restart source: [ 39.800188] reboot: Restarting system [ 39.804115] ------------[ cut here ]------------ [ 39.807855] WARNING: CPU: 0 PID: 678 at kernel/rcu/tree_plugin.h:297 rcu_note_context_switch+0x190/0x764 [ 39.812538] Modules linked in: [ 39.821954] CPU: 0 PID: 678 Comm: reboot Not tainted 5.10.0-rc1-00063-g33a9990d1d66-dirty #47 [ 39.824854] Hardware name: Generic DT based system [ 39.833470] [<c0310fbc>] (unwind_backtrace) from [<c030c544>] (show_stack+0x10/0x14) [ 39.838154] [<c030c544>] (show_stack) from [<c0c218f0>] (dump_stack+0x8c/0xa0) [ 39.846049] [<c0c218f0>] (dump_stack) from [<c0322f80>] (__warn+0xd8/0xf0) [ 39.853058] [<c0322f80>] (__warn) from [<c0c1dc08>] (warn_slowpath_fmt+0x64/0xc8) [ 39.859925] [<c0c1dc08>] (warn_slowpath_fmt) from [<c038b6f4>] (rcu_note_context_switch+0x190/0x764) [ 39.867503] [<c038b6f4>] (rcu_note_context_switch) from [<c0c2aa3c>] (__schedule+0x84/0x640) [ 39.876685] [<c0c2aa3c>] (__schedule) from [<c0c2b050>] (schedule+0x58/0x10c) [ 39.885095] [<c0c2b050>] (schedule) from [<c0c2eed0>] (schedule_timeout+0x1e8/0x3d4) [ 39.892135] [<c0c2eed0>] (schedule_timeout) from [<c039ad40>] (msleep+0x2c/0x38) [ 39.899947] [<c039ad40>] (msleep) from [<c0a59d0c>] (qcom_wdt_restart+0xc4/0xcc) [ 39.907319] [<c0a59d0c>] (qcom_wdt_restart) from [<c0a58290>] (watchdog_restart_notifier+0x18/0x28) [ 39.914715] [<c0a58290>] (watchdog_restart_notifier) from [<c03468e0>] (atomic_notifier_call_chain+0x60/0x84) [ 39.923487] [<c03468e0>] (atomic_notifier_call_chain) from [<c030ae64>] (machine_restart+0x78/0x7c) [ 39.933551] [<c030ae64>] (machine_restart) from [<c0348048>] (__do_sys_reboot+0xdc/0x1e0) [ 39.942397] [<c0348048>] (__do_sys_reboot) from [<c0300060>] (ret_fast_syscall+0x0/0x54) [ 39.950721] Exception stack(0xc3e0bfa8 to 0xc3e0bff0) [ 39.958855] bfa0: 0001221c bed2fe24 fee1dead 28121969 01234567 00000000 [ 39.963832] bfc0: 0001221c bed2fe24 00000003 00000058 000225e0 00000000 00000000 00000000 [ 39.971985] bfe0: b6e62560 bed2fc84 00010fd8 b6e62580 [ 39.980124] ---[ end trace 3f578288bad866e4 ]--- Hence, replace msleep() with mdelay() to fix this issue. Fixes: 05e487d905ab ("watchdog: qcom: register a restart notifier") Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201207060005.21293-1-manivannan.sadhasivam@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30watchdog: Fix potential dereferencing of null pointerWang Wensheng
[ Upstream commit 6f733cb2e7db38f8141b14740bcde577844a03b7 ] A reboot notifier, which stops the WDT by calling the stop hook without any check, would be registered when we set WDOG_STOP_ON_REBOOT flag. Howerer we allow the WDT driver to omit the stop hook since commit "d0684c8a93549" ("watchdog: Make stop function optional") and provide a module parameter for user that controls the WDOG_STOP_ON_REBOOT flag in commit 9232c80659e94 ("watchdog: Add stop_on_reboot parameter to control reboot policy"). Together that commits make user potential to insert a watchdog driver that don't provide a stop hook but with the stop_on_reboot parameter set, then dereferencing of null pointer occurs on system reboot. Check the stop hook before registering the reboot notifier to fix the issue. Fixes: d0684c8a9354 ("watchdog: Make stop function optional") Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201109130512.28121-1-wangwensheng4@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30watchdog: sprd: check busy bit before new loading rather than after thatLingling Xu
[ Upstream commit 3e07d240939803bed9feb2a353d94686a411a7ca ] As the specification described, users must check busy bit before start a new loading operation to make sure that the previous loading is done and the device is ready to accept a new one. [ chunyan: Massaged changelog ] Fixes: 477603467009 ("watchdog: Add Spreadtrum watchdog driver") Signed-off-by: Lingling Xu <ling_ling.xu@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201029023933.24548-3-zhang.lyra@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30watchdog: sprd: remove watchdog disable from resume fail pathLingling Xu
[ Upstream commit f61a59acb462840bebcc192f754fe71b6a16ff99 ] sprd_wdt_start() would return fail if the loading operation is not completed in a certain time, disabling watchdog for that case would probably cause the kernel crash when kick watchdog later, that's too bad, so remove the watchdog disable operation for the fail case to make sure other parts in the kernel can run normally. [ chunyan: Massaged changelog ] Fixes: 477603467009 ("watchdog: Add Spreadtrum watchdog driver") Signed-off-by: Lingling Xu <ling_ling.xu@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20201029023933.24548-2-zhang.lyra@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30watchdog: sirfsoc: Add missing dependency on HAS_IOMEMGuenter Roeck
[ Upstream commit 8ae2511112d2e18bc7d324b77f965d34083a25a2 ] If HAS_IOMEM is not defined and SIRFSOC_WATCHDOG is enabled, the build fails with the following error. drivers/watchdog/sirfsoc_wdt.o: in function `sirfsoc_wdt_probe': sirfsoc_wdt.c:(.text+0x112): undefined reference to `devm_platform_ioremap_resource' Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Fixes: da2a68b3eb47 ("watchdog: Enable COMPILE_TEST where possible") Link: https://lore.kernel.org/r/20201108162550.27660-2-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-30watchdog: armada_37xx: Add missing dependency on HAS_IOMEMGuenter Roeck
[ Upstream commit 7f6f1dfb2dcbe5d2bfa213f2df5d74c147cd5954 ] The following kbuild warning is seen on a system without HAS_IOMEM. WARNING: unmet direct dependencies detected for MFD_SYSCON Depends on [n]: HAS_IOMEM [=n] Selected by [y]: - ARMADA_37XX_WATCHDOG [=y] && WATCHDOG [=y] && (ARCH_MVEBU || COMPILE_TEST This results in a subsequent compile error. drivers/watchdog/armada_37xx_wdt.o: in function `armada_37xx_wdt_probe': armada_37xx_wdt.c:(.text+0xdc): undefined reference to `devm_ioremap' Add the missing dependency. Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com> Fixes: 54e3d9b518c8 ("watchdog: Add support for Armada 37xx CPU watchdog") Link: https://lore.kernel.org/r/20201108162550.27660-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05drivers: watchdog: rdc321x_wdt: Fix race condition bugsMadhuparna Bhowmik
[ Upstream commit 4b2e7f99cdd314263c9d172bc17193b8b6bba463 ] In rdc321x_wdt_probe(), rdc321x_wdt_device.queue is initialized after misc_register(), hence if ioctl is called before its initialization which can call rdc321x_wdt_start() function, it will see an uninitialized value of rdc321x_wdt_device.queue, hence initialize it before misc_register(). Also, rdc321x_wdt_device.default_ticks is accessed in reset() function called from write callback, thus initialize it before misc_register(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20200807112902.28764-1-madhuparnabhowmik10@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3Guenter Roeck
[ Upstream commit 08c619b4923056b5dd2d5045757468c76ad0e3fe ] EFCH_PM_DECODEEN3 is supposed to access DECODEEN register bits 24..31, in other words the register at byte offset 3. Cc: Jan Kiszka <jan.kiszka@siemens.com> Fixes: 887d2ec51e34b ("watchdog: sp5100_tco: Add support for recent FCH versions") Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/r/20200910163109.235136-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29watchdog: Use put_device on errorDinghao Liu
[ Upstream commit 937425d4cd3ae4e2882b41e332bbbab616bcf0ad ] We should use put_device() instead of freeing device directly after device_initialize(). Fixes: cb36e29bb0e4b ("watchdog: initialize device before misc_register") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200824031230.31050-1-dinghao.liu@zju.edu.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29watchdog: Fix memleak in watchdog_cdev_registerDinghao Liu
[ Upstream commit 5afb6d203d0293512aa2c6ae098274a2a4f6ed02 ] When watchdog_kworker is NULL, we should free wd_data before the function returns to prevent memleak. Fixes: 664a39236e718 ("watchdog: Introduce hardware maximum heartbeat in watchdog core") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200824024001.25474-1-dinghao.liu@zju.edu.cn Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21watchdog: initialize device before misc_registerKrzysztof Sobota
[ Upstream commit cb36e29bb0e4b0c33c3d5866a0a4aebace4c99b7 ] When watchdog device is being registered, it calls misc_register that makes watchdog available for systemd to open. This is a data race scenario, because when device is open it may still have device struct not initialized - this in turn causes a crash. This patch moves device initialization before misc_register call and it solves the problem printed below. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/kobject.c:612 kobject_get+0x50/0x54 kobject: '(null)' ((ptrval)): is not initialized, yet kobject_get() is being called. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd394>] (kobject_get+0x50/0x54) [<c07fd394>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb105513974f ]--- ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1 at lib/refcount.c:153 kobject_get+0x24/0x54 refcount_t: increment on 0; use-after-free. Modules linked in: k2_reset_status(O) davinci_wdt(+) sfn_platform_hwbcn(O) fsmddg_sfn(O) clk_misc_mmap(O) clk_sw_bcn(O) fsp_reset(O) cma_mod(O) slave_sup_notif(O) fpga_master(O) latency(O+) evnotify(O) enable_arm_pmu(O) xge(O) rio_mport_cdev br_netfilter bridge stp llc nvrd_checksum(O) ipv6 CPU: 3 PID: 1 Comm: systemd Tainted: G W O 4.19.113-g2579778-fsm4_k2 #1 Hardware name: Keystone [<c02126c4>] (unwind_backtrace) from [<c020da94>] (show_stack+0x18/0x1c) [<c020da94>] (show_stack) from [<c07f87d8>] (dump_stack+0xb4/0xe8) [<c07f87d8>] (dump_stack) from [<c0221f70>] (__warn+0xfc/0x114) [<c0221f70>] (__warn) from [<c0221fd8>] (warn_slowpath_fmt+0x50/0x74) [<c0221fd8>] (warn_slowpath_fmt) from [<c07fd368>] (kobject_get+0x24/0x54) [<c07fd368>] (kobject_get) from [<c0602ce8>] (get_device+0x1c/0x24) [<c0602ce8>] (get_device) from [<c06961e0>] (watchdog_open+0x90/0xf0) [<c06961e0>] (watchdog_open) from [<c06001dc>] (misc_open+0x130/0x17c) [<c06001dc>] (misc_open) from [<c0388228>] (chrdev_open+0xec/0x1a8) [<c0388228>] (chrdev_open) from [<c037fa98>] (do_dentry_open+0x204/0x3cc) [<c037fa98>] (do_dentry_open) from [<c0391e2c>] (path_openat+0x330/0x1148) [<c0391e2c>] (path_openat) from [<c0394518>] (do_filp_open+0x78/0xec) [<c0394518>] (do_filp_open) from [<c0381100>] (do_sys_open+0x130/0x1f4) [<c0381100>] (do_sys_open) from [<c0201000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd2ceffa8 to 0xd2cefff0) ffa0: b6f69968 00000000 ffffff9c b6ebd210 000a0001 00000000 ffc0: b6f69968 00000000 00000000 00000142 fffffffd ffffffff 00b65530 bed7bb78 ffe0: 00000142 bed7ba70 b6cc2503 b6cc41d6 ---[ end trace 7b16eb1055139750 ]--- Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Krzysztof Sobota <krzysztof.sobota@nokia.com> Link: https://lore.kernel.org/r/20200717103109.14660-1-krzysztof.sobota@nokia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21watchdog: f71808e_wdt: clear watchdog timeout occurred flagAhmad Fatoum
commit 4f39d575844148fbf3081571a1f3b4ae04150958 upstream. The flag indicating a watchdog timeout having occurred normally persists till Power-On Reset of the Fintek Super I/O chip. The user can clear it by writing a `1' to the bit. The driver doesn't offer a restart method, so regular system reboot might not reset the Super I/O and if the watchdog isn't enabled, we won't touch the register containing the bit on the next boot. In this case all subsequent regular reboots will be wrongly flagged by the driver as being caused by the watchdog. Fix this by having the flag cleared after read. This is also done by other drivers like those for the i6300esb and mpc8xxx_wdt. Fixes: b97cb21a4634 ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200611191750.28096-5-a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21watchdog: f71808e_wdt: remove use of wrong watchdog_info optionAhmad Fatoum
commit 802141462d844f2e6a4d63a12260d79b7afc4c34 upstream. The flags that should be or-ed into the watchdog_info.options by drivers all start with WDIOF_, e.g. WDIOF_SETTIMEOUT, which indicates that the driver's watchdog_ops has a usable set_timeout. WDIOC_SETTIMEOUT was used instead, which expands to 0xc0045706, which equals: WDIOF_FANFAULT | WDIOF_EXTERN1 | WDIOF_PRETIMEOUT | WDIOF_ALARMONLY | WDIOF_MAGICCLOSE | 0xc0045000 These were so far indicated to userspace on WDIOC_GETSUPPORT. As the driver has not yet been migrated to the new watchdog kernel API, the constant can just be dropped without substitute. Fixes: 96cb4eb019ce ("watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200611191750.28096-4-a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.optionsAhmad Fatoum
commit e871e93fb08a619dfc015974a05768ed6880fd82 upstream. The driver supports populating bootstatus with WDIOF_CARDRESET, but so far userspace couldn't portably determine whether absence of this flag meant no watchdog reset or no driver support. Or-in the bit to fix this. Fixes: b97cb21a4634 ("watchdog: f71808e_wdt: Fix WDTMOUT_STS register read") Cc: stable@vger.kernel.org Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200611191750.28096-3-a.fatoum@pengutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24watchdog: da9062: No need to ping manually before setting timeoutStefan Riedmueller
[ Upstream commit a0948ddba65f4f6d3cfb5e2b84685485d0452966 ] There is actually no need to ping the watchdog before disabling it during timeout change. Disabling the watchdog already takes care of resetting the counter. This fixes an issue during boot when the userspace watchdog handler takes over and the watchdog is already running. Opening the watchdog in this case leads to the first ping and directly after that without the required heartbeat delay a second ping issued by the set_timeout call. Due to the missing delay this resulted in a reset. Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-17watchdog: imx_sc_wdt: Fix reboot on crashFabio Estevam
commit e56d48e92b1017b6a8dbe64923a889283733fd96 upstream. Currently when running the samples/watchdog/watchdog-simple.c application and forcing a kernel crash by doing: # ./watchdog-simple & # echo c > /proc/sysrq-trigger The system does not reboot as expected. Fix it by calling imx_sc_wdt_set_timeout() to configure the i.MX8QXP watchdog with a proper timeout. Cc: <stable@vger.kernel.org> Fixes: 986857acbc9a ("watchdog: imx_sc: Add i.MX system controller watchdog support") Reported-by: Breno Lima <breno.lima@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Breno Lima <breno.lima@nxp.com> Link: https://lore.kernel.org/r/20200412230122.5601-1-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29watchdog: reset last_hw_keepalive time at startTero Kristo
[ Upstream commit 982bb70517aef2225bad1d802887b733db492cc0 ] Currently the watchdog core does not initialize the last_hw_keepalive time during watchdog startup. This will cause the watchdog to be pinged immediately if enough time has passed from the system boot-up time, and some types of watchdogs like K3 RTI does not like this. To avoid the issue, setup the last_hw_keepalive time during watchdog startup. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23watchdog: sp805: fix restart handlerMichael Walle
commit ea104a9e4d3e9ebc26fb78dac35585b142ee288b upstream. The restart handler is missing two things, first, the registers has to be unlocked and second there is no synchronization for the write_relaxed() calls. This was tested on a custom board with the NXP LS1028A SoC. Fixes: 6c5c0d48b686c ("watchdog: sp805: add restart handler") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.cc Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-08watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optionalMika Westerberg
commit e42b0c24389d5a1602e77db4f6def0d5a19e3e43 upstream. The iTCO_wdt driver only needs ICH_RES_IO_SMI I/O resource when either turn_SMI_watchdog_clear_off module parameter is set to match ->iTCO_version (or higher), and when legacy iTCO_vendorsupport is set. Modify the driver so that ICH_RES_IO_SMI is optional if the two conditions are not met. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-08watchdog: iTCO_wdt: Export vendorsupportMika Westerberg
commit 7ca6ee38909109751bfab79e9f6c570d2ed258c6 upstream. In preparation for making ->smi_res optional the iTCO_wdt driver needs to know whether vendorsupport is being set to non-zero. For this reason export the variable. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21ACPI: watchdog: Set default timeout in probeMika Westerberg
[ Upstream commit cabe17d0173ab04bd3f87b8199ae75f43f1ea473 ] If the BIOS default timeout for the watchdog is too small userspace may not have enough time to configure new timeout after opening the device before the system is already reset. For this reason program default timeout of 30 seconds in the driver probe and allow userspace to change this from command line or through module parameter (wdat_wdt.timeout). Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-12watchdog: da9062: do not ping the hw during stop()Marco Felsch
[ Upstream commit e9a0e65eda3f78d0b04ec6136c591c000cbc3b76 ] The da9062 hw has a minimum ping cool down phase of at least 200ms. The driver takes that into account by setting the min_hw_heartbeat_ms to 300ms and the core guarantees that the hw limit is observed for the ping() calls. But the core can't guarantee the required minimum ping cool down phase if a stop() command is send immediately after the ping() command. So it is not allowed to ping the watchdog within the stop() command as the driver does. Remove the ping can be done without doubts because the watchdog gets disabled anyway and a (re)start resets the watchdog counter too. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de [groeck: Updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-05ACPI: watchdog: Fix gas->access_width usageMika Westerberg
commit 2ba33a4e9e22ac4dda928d3e9b5978a3a2ded4e0 upstream. ACPI Generic Address Structure (GAS) access_width field is not in bytes as the driver seems to expect in few places so fix this by using the newly introduced macro ACPI_ACCESS_BYTE_WIDTH(). Fixes: b1abf6fc4982 ("ACPI / watchdog: Fix off-by-one error at resource assignment") Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probeChristophe Roullier
commit 85fdc63fe256b595f923a69848cd99972ff446d8 upstream. If the watchdog hardware is already enabled during the boot process, when the Linux watchdog driver loads, it should start/reset the watchdog and tell the watchdog framework. As a result, ping can be generated from the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set), until the userspace watchdog daemon takes over control Fixes:4332d113c66a ("watchdog: Add STM32 IWDG driver") Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191122132246.8473-1-christophe.roullier@st.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14watchdog: qcom: Use platform_get_irq_optional() for bark irqSai Prakash Ranjan
commit e0b4f4e0cf7fa9d62628d4249c765ec18dffd143 upstream. platform_get_irq() prints an error message when the interrupt is not available. So on platforms where bark interrupt is not specified, following error message is observed on SDM845. [ 2.975888] qcom_wdt 17980000.watchdog: IRQ index 0 not found This is also seen on SC7180, SM8150 SoCs as well. Fix this by using platform_get_irq_optional() instead. Fixes: 36375491a4395654 ("watchdog: qcom: support pre-timeout when the bark irq is available") Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191213064934.4112-1-saiprakash.ranjan@codeaurora.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11watchdog: fix UAF in reboot notifier handling in watchdog core codeVladis Dronov
commit 69503e585192fdd84b240f18a0873d20e18a2e0a upstream. After the commit 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") the struct notifier_block reboot_nb in the struct watchdog_device is removed from the reboot notifiers chain at the time watchdog's chardev is closed. But at least in i6300esb.c case reboot_nb is embedded in the struct esb_dev which can be freed on its device removal and before the chardev is closed, thus UAF at reboot: [ 7.728581] esb_probe: esb_dev.watchdog_device ffff91316f91ab28 ts# uname -r note the address ^^^ 5.5.0-rc5-ae6088-wdog ts# ./openwdog0 & [1] 696 ts# opened /dev/watchdog0, sleeping 10s... ts# echo 1 > /sys/devices/pci0000\:00/0000\:00\:09.0/remove [ 178.086079] devres:rel_nodes: dev ffff91317668a0b0 data ffff91316f91ab28 esb_dev.watchdog_device.reboot_nb memory is freed here ^^^ ts# ...woken up [ 181.459010] devres:rel_nodes: dev ffff913171781000 data ffff913174a1dae8 [ 181.460195] devm_unreg_reboot_notifier: res ffff913174a1dae8 nb ffff91316f91ab78 attempt to use memory already freed ^^^ [ 181.461063] devm_unreg_reboot_notifier: nb->call 6b6b6b6b6b6b6b6b [ 181.461243] devm_unreg_reboot_notifier: nb->next 6b6b6b6b6b6b6b6b freed memory is filled with a slub poison ^^^ [1]+ Done ./openwdog0 ts# reboot [ 229.921862] systemd-shutdown[1]: Rebooting. [ 229.939265] notifier_call_chain: nb ffffffff9c6c2f20 nb->next ffffffff9c6d50c0 [ 229.943080] notifier_call_chain: nb ffffffff9c6d50c0 nb->next 6b6b6b6b6b6b6b6b [ 229.946054] notifier_call_chain: nb 6b6b6b6b6b6b6b6b INVAL [ 229.957584] general protection fault: 0000 [#1] SMP [ 229.958770] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.5.0-rc5-ae6088-wdog [ 229.960224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 229.963288] RIP: 0010:notifier_call_chain+0x66/0xd0 [ 229.969082] RSP: 0018:ffffb20dc0013d88 EFLAGS: 00010246 [ 229.970812] RAX: 000000000000002e RBX: 6b6b6b6b6b6b6b6b RCX: 00000000000008b3 [ 229.972929] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff9ccc46ac [ 229.975028] RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000008b3 [ 229.977039] R10: 0000000000000001 R11: ffffffff9c26c740 R12: 0000000000000000 [ 229.979155] R13: 6b6b6b6b6b6b6b6b R14: 0000000000000000 R15: 00000000fffffffa ... slub_debug=FZP poison ^^^ [ 229.989089] Call Trace: [ 229.990157] blocking_notifier_call_chain+0x43/0x59 [ 229.991401] kernel_restart_prepare+0x14/0x30 [ 229.992607] kernel_restart+0x9/0x30 [ 229.993800] __do_sys_reboot+0x1d2/0x210 [ 230.000149] do_syscall_64+0x3d/0x130 [ 230.001277] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 230.002639] RIP: 0033:0x7f5461bdd177 [ 230.016402] Modules linked in: i6300esb [ 230.050261] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix the crash by reverting 44ea39420fc9 so unregister_reboot_notifier() is called when watchdog device is removed. This also makes handling of the reboot notifier unified with the handling of the restart handler, which is freed with unregister_restart_handler() in the same place. Fixes: 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200108125347.6067-1-vdronov@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-01watchdog: orion: fix platform_get_irq() complaintsRussell King
[ Upstream commit dcbce5fbcc69bf2553f650004aad44bf390eca73 ] Fix: orion_wdt f1020300.watchdog: IRQ index 1 not found which is caused by platform_get_irq() now complaining when optional IRQs are not found. Neither interrupt for orion is required, so make them both optional. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/E1iahcN-0000AT-Co@rmk-PC.armlinux.org.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-01watchdog: rn5t618_wdt: fix module aliasesAndreas Kemnade
[ Upstream commit a76dfb859cd42df6e3d1910659128ffcd2fb6ba2 ] Platform device aliases were missing so module autoloading did not work. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-01watchdog: max77620_wdt: fix potential build errorsDavid Engraf
[ Upstream commit da9e3f4e30a53cd420cf1e6961c3b4110f0f21f0 ] max77620_wdt uses watchdog core functions. Enable CONFIG_WATCHDOG_CORE to fix potential build errors. Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191127084617.16937-1-david.engraf@sysgo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26watchdog: sprd: Fix the incorrect pointer getting from driver dataShuiqing Li
commit 39e68d9e7ab276880980ee5386301fb218202192 upstream. The device driver data saved the 'struct sprd_wdt' object, it is incorrect to get 'struct watchdog_device' object from the driver data, thus fix it. Fixes: 477603467009 ("watchdog: Add Spreadtrum watchdog driver") Reported-by: Dongwei Wang <dongwei.wang@unisoc.com> Signed-off-by: Shuiqing Li <shuiqing.li@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/76d4687189ec940baa90cb8d679a8d4c8f02ee80.1573210405.git.baolin.wang@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09watchdog: tqmx86_wdt: Fix build errorYueHaibing
commit 9a6c274ac1c4346f5384f2290caeb42dc674c471 upstream. If TQMX86_WDT is y and WATCHDOG_CORE is m, building fails: drivers/watchdog/tqmx86_wdt.o: In function `tqmx86_wdt_probe': tqmx86_wdt.c:(.text+0x46e): undefined reference to `watchdog_init_timeout' tqmx86_wdt.c:(.text+0x4e0): undefined reference to `devm_watchdog_register_device' Select WATCHDOG_CORE to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e3c21e088f89 ("watchdog: tqmx86: Add watchdog driver for the IO controller") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191206124259.25880-1-yuehaibing@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04watchdog: Fix the race between the release of watchdog_core_data and cdevKevin Hao
[ Upstream commit 72139dfa2464e43957d330266994740bb7be2535 ] The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04watchdog: prevent deferral of watchdogd wakeup on RTJulia Cartwright
[ Upstream commit a19f89335f4bda3d77d991c96583e3e51856acbb ] When PREEMPT_RT is enabled, all hrtimer expiry functions are deferred for execution into the context of ksoftirqd unless otherwise annotated. Deferring the expiry of the hrtimer used by the watchdog core, however, is a waste, as the callback does nothing but queue a kthread work item and wakeup watchdogd. It's worst then that, too: the deferral through ksoftirqd also means that for correct behavior a user must adjust the scheduling parameters of both watchdogd _and_ ksoftirqd, which is unnecessary and has other side effects (like causing unrelated expiry functions to execute at potentially elevated priority). Instead, mark the hrtimer used by the watchdog core as being _HARD to allow it's execution directly from hardirq context. The work done in this expiry function is well-bounded and minimal. A user still must adjust the scheduling parameters of the watchdogd to be correct w.r.t. their application needs. Link: https://lkml.kernel.org/r/0e02d8327aeca344096c246713033887bc490dd7.1538089180.git.julia@ni.com Cc: Guenter Roeck <linux@roeck-us.net> Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [bigeasy: use only HRTIMER_MODE_REL_HARD] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191105144506.clyadjbvnn7b7b2m@linutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04watchdog: imx7ulp: Fix reboot hangFabio Estevam
[ Upstream commit 6083ab7b2f3f25022e2e8f4c42f14a8521f47873 ] The following hang is observed when a 'reboot' command is issued: # reboot # Stopping network: OK Stopping klogd: OK Stopping syslogd: OK umount: devtmpfs busy - remounted read-only [ 8.612079] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system reboot [ 10.694753] reboot: Restarting system [ 11.699008] Reboot failed -- System halted Fix this problem by adding a .restart ops member. Fixes: 41b630f41bf7 ("watchdog: Add i.MX7ULP watchdog support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191029174037.25381-1-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-13 09:28:05 +0000