summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-19ide-cd: fix missing residual count setting in DMA modeKiyoshi Ueda
This patch fixes the missing residual count setting in DMA mode, which was introduced during the conversion to blk-end-request. The residual count could be used by the request submitter. So if it isn't set correctly, some upper layers does not work. (e.g. wodim for CD burning.) The bug is in only DMA mode. In PIO mode, we are setting the residual count correctly, so no need to fix. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Reported-by: Andreas Schwab <schwab@suse.de> Tested-by: Andreas Schwab <schwab@suse.de> Tested-by: Laura Garcia <nevola@gmail.com> Tested-by: Borislav Petkov <petkovbb@googlemail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19ht6560b: force prefetch for some devicesJan Evert van Grootheest
Prefetch needs to be set for some ide devices to work when connected to a ht6560b interface. This was not always done properly, causing a system with a HD and CD on the primary interface to not work properly. Or, in effect, hang hard. This patch forces prefetch on devices before checking whether it is necessary to change the settings in the interface This patch should also be applied to 2.4. I don't currently have a 2.4 tree around. (also change my email address) Signed-off-by: Jan Evert van Grootheest <janevert@caiway.nl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19ht6560b can only do up to PIO mode 4Jan Evert van Grootheest
According to the datasheet, ht6560b only supports up to PIO mode 4. [bart: manually ported it over 2.6.25-rc2] Signed-off-by: Jan Evert van Grootheest <janevert@caiway.nl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19via82cxxx: add new PCI id for cx700Andrew Smith
[bart: manually ported it over via82cxxx changes] From: Andrew Smith <asmith@tranquility.fsbusiness.co.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19falconide: locking bugfixBartlomiej Zolnierkiewicz
commit 8ac4ce742c66100931b6f2d7a36b0df08bc721fe ("ide: fix host drivers depending on ide_generic to probe for interfaces (take 2)") moved probing to falconide but forgot to take care of Atari specific locking - fix it. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michael Schmitz <schmitz@debian.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19ide/libata: ST310211A has buggy HPA tooMikko Rapeli
Signed-off-by: Mikko Rapeli <mikko.rapeli@teleca.com> Tested-by: Bart Champagne <bart@as35701.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-19ide: Add missing base addresses for falconide and macideGeert Uytterhoeven
commit 29dd59755a849cc6475faa6a75f3b804e23a6fc2 ("ide: remove ide_setup_ports") forgot to take into account the base addresses for the CONTROL registers for falconide and macide, as pointed out by Michael Schmitz. Falconide was tested on Aranym. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michael Schmitz <schmitz@debian.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix possible array overrun RDMA/nes: Fix VLAN support RDMA/nes: Fix MAC interrupt erroneously masked on ifdown IB: Fix return value in ib_device_register_sysfs()
2008-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (59 commits) V4L/DVB (7219): zoran: Fix namespace conflicts with Zoran 'GPIO_MAX' enum V4L/DVB (7205): tuner-xc2028 depends on FW_LOADER V4L/DVB (7201): cx88-mpeg: Fix race condition in variable access V4L/DVB (7200): Fix FM firmware loading V4L/DVB (7198): V4L, include ioctl.h in videodev headers V4L/DVB (7197): bttv: Fix overlay divide error V4L/DVB (7195): xc5000: fix build error when built as module V4L/DVB (7194): cx88-mpeg: Allow concurrent access to cx88-mpeg devices V4L/DVB (7193): tveeprom: Add proper tuner mapping for hauppauge eeprom id 133 V4L/DVB (7192): Adds support for Genius TVGo A11MCE V4L/DVB (7189): autosuspend support V4L/DVB (7188): radio-si470x version 1.0.6 V4L/DVB (7186): tda10086: make the 22kHz tone for DISEQC a config option V4L/DVB (7183): radio-si470x: fix build warning V4L/DVB (7180): em28xx: add URB_NO_TRANSFER_DMA_MAP, since urb->transfer_dma is set V4L/DVB (7179): Allow more than one em28xx board V4L/DVB (7164): em28xx-alsa: Add a missing mutex V4L/DVB (7163): em28xx: makes audio settings more stable V4L/DVB (7162): em28xx: Fix endian and returns the correct values V4L/DVB (7161): em28xx: Fix printing debug values higher than 127 ...
2008-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] null: Add missing Kconfig dependency on BLKCIPHER [CRYPTO] tcrypt: Add missing Kconfig dependency on BLKCIPHER [HIFN]: Fix invalid config ifdefs for RNG support
2008-02-18RDMA/nes: Fix possible array overrunRoland Dreier
In nes_create_qp(), the test if (nesqp->mmap_sq_db_index > NES_MAX_USER_WQ_REGIONS) { is used to error out if the db_index is too large; however, if the test doesn't trigger, then the index is used as nes_ucontext->mmap_nesqp[nesqp->mmap_sq_db_index] = nesqp; and mmap_nesqp is declared as struct nes_qp *mmap_nesqp[NES_MAX_USER_WQ_REGIONS]; which leads to an array overrun if the index is exactly equal to NES_MAX_USER_WQ_REGIONS. Fix this by bailing out if the index is greater than or equal to NES_MAX_USER_WQ_REGIONS. This was spotted by the Coverity checker (CID 2162). Acked-by: Glenn Streiff <gstreiff@neteffect.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-18V4L/DVB (7219): zoran: Fix namespace conflicts with Zoran 'GPIO_MAX' enumMauro Carvalho Chehab
Thanks to Martin Michlmayr <tbm@cyrius.com> for reporting this issue: The zoran driver fails to compile on the ARM Orion platform with: In file included from drivers/media/video/zoran_procfs.c:50: drivers/media/video/zoran.h:232: error: expected identifier before numeric constant The reason is that drivers/media/video/zoran.h defines an enum with GPIO_MAX in it, but Orion contains a #define GPIO_MAX 32 in include/asm-arm/arch-orion/orion.h Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7205): tuner-xc2028 depends on FW_LOADERPaul Mundt
Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7201): cx88-mpeg: Fix race condition in variable accessRicardo Cerqueira
There was a possible race condition in the increment/decrement of the active device references counter. Thanks to Trent Piepho (xyzzy@speakeasy.org) for bringing it up. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7200): Fix FM firmware loadingMauro Carvalho Chehab
There's no need to load SCode table for FM. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7197): bttv: Fix overlay divide errorRobert Fitzsimons
The initial work to convert the bttv driver to V4L2 "Partial conversion from V4L1 to V4L2" (e84619b17440ccca4e4db7583d126c4189b987e5), missed the line which set the appropriate overlay crop structure in the newly allocated bttv_buffer. This then causes a divide error in the bttv_calc_geo function. Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7195): xc5000: fix build error when built as moduleTony Breeds
drivers/built-in.o: In function `set_type': tuner-core.c:(.text+0x8879d): undefined reference to `xc5000_attach' Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7194): cx88-mpeg: Allow concurrent access to cx88-mpeg devicesRoland Stoll
It currently isn't possible to open the frontend device of cx88-mpeg devices (DVB or Blackbird) multiple times concurrently. (for instance, to attach a signal monitoring tool while reading a stream, or to send a frequency change ioctl) This patch fixes that condition. Signed-off-by: Roland Stoll <roland@xindex.de> Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7193): tveeprom: Add proper tuner mapping for hauppauge eeprom id 133Ricardo Cerqueira
Do away with the need to set tuner=63 on cx88xx with recent HVR-1300 boards Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7192): Adds support for Genius TVGo A11MCEAdrian Pardini
Signed-off-by: Adrian Pardini <pardo.bsso@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7189): autosuspend supportTobias Lorenz
Together with Oliver Neukum from Novell, USB autosuspend support was added. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7188): radio-si470x version 1.0.6Tobias Lorenz
This patch combines all the finished discussions and its resulting patches from the mailing list. The version 1.0.6 is mainly influenced by Oliver Neukum. He found a lot of small issues, that are fixed with this patch now. For me the most interesting thing is, that it's now safer to use it on other architectures. The history for version 1.0.6 is: - fixed coverity checker warnings in *_usb_driver_disconnect - probe()/open() race by correct ordering in probe() - DMA coherency rules by separate allocation of all buffers - use of endianness macros - abuse of spinlock, replaced by mutex - racy handling of timer in disconnect, replaced by delayed_work - racy interruptible_sleep_on(), replaced with wait_event_interruptible() - handle signals in read() The driver is tested with all Debian/testing radio programs and rdsd. The patch is tested against checkpatch.pl v1.12. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7186): tda10086: make the 22kHz tone for DISEQC a config optionHartmut Hackmann
Some cards need the diseqc signal modulated, while some just need the envelope to control the LNB supply. This fixes Bug 9887 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7183): radio-si470x: fix build warningMichael Krufky
fix the following build warning: radio-si470x.c: In function 'si470x_get_rds_registers': radio-si470x.c:562: warning: format '%ld' expects type 'long int', but argument 3 has type 'unsigned int' Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7180): em28xx: add URB_NO_TRANSFER_DMA_MAP, since urb->transfer_dma ↵Mauro Carvalho Chehab
is set Thanks to Alan Stern <stern@rowland.harvard.edu> for pointing this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7179): Allow more than one em28xx boardMauro Carvalho Chehab
em28xx driver is capable of handling more than one usb device. However, isoc transfers require a large amount of data to be transfered. Before this patch, just one em28xx board were enough to allocate more than 50% URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=480/800 us (60%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, only one board could use an USB host at the same time. After the patch, it is possible to use more than one em28xx at the same time, on the same usb host, if the image size is slower or equal to 345600, since those images will require about 30% of the URBs: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8 B: Alloc=232/800 us (29%), #Int= 0, #Iso= 2 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1 So, in thesis, after the patch, it would be possible to use up to 3 boards by each usb host, if the devices are generating small images. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7164): em28xx-alsa: Add a missing mutexMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7163): em28xx: makes audio settings more stableMauro Carvalho Chehab
Improves audio configurations on em28xx: - mutes audio before changing amux; - adds a delay after setting audio src; - waits up to 50ms for ac97 busy. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7162): em28xx: Fix endian and returns the correct valuesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7161): em28xx: Fix printing debug values higher than 127Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7160): em28xx: Allow register dump/setting for debugMauro Carvalho Chehab
Adds vidioc_[g|s]_register handlers. This allows getting/setting register from em28xx. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7158): Fix em28xx audio initializationMauro Carvalho Chehab
AC97 register initialization seem to always be needed. This patch fixes audio for Prolink/Pixelview USB2 board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7156): em28xx/em28xx-core.c: fix use of potentially uninitialized ↵Andrew Morton
variable drivers/media/video/em28xx/em28xx-core.c: In function 'em28xx_set_audio_source': drivers/media/video/em28xx/em28xx-core.c:276: warning: 'no_ac97' may be used uninitialized in this function This looks like a genuine bug to me. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7150): [v4l] convert videbuf_vmalloc_memory to videobuf_vmalloc_memoryBrandon Philips
Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7139): add parenthesesRoel Kluin
'!' has a higher priority than '&': bitanding has no effect. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7132): Add USB ID for a newer variant of Hauppauge WinTV-HVR 900Luc Saillard
Device description: WinTV-HVR-900 M/R: 65018/B3C0 ##4207 Signed-off-by: Luc Saillard <luc@saillard.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7122): saa7134-empress: Remove back lockMauro Carvalho Chehab
videobuf functions at close() method already locks videobuf. It makes no sense to keep the locking at empress close() method. There is also a lock at open() method. I'm not sure if it is safe to remove the locking there. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7121): Renames videobuf lock to vb_lockMauro Carvalho Chehab
This helps to identify where vb_lock is being used, and find missusages of the locks. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7120): videobuf lock is already initialized at videobuf-core.cMauro Carvalho Chehab
Removes the duplicated mutex_init code. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7118): dvb-ttpci: Improved display of still picturesOliver Endriss
Improved display of still pictures (VIDEO_STILLPICTURE ioctl). Ensure that both fields are displayed for progressive frames. Thanks to Reinhard Nissl and Klaus Schmidinger for finding out that the FREEZE command does this. Thanks-to: Reinhard Nissl <rnissl@gmx.de> Thanks-to: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7117): budget-av: Add support for Satelco EasyWatch PCI DVB-TKim Sandberg
Add support for Satelco EasyWatch PCI DVB-T, sub-id 0x1894:0x003a. Signed-off-by: Kim Sandberg <ksan@saunalahti.fi> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7116): budget-av: Add support for KNC TV Station Plus X4Oliver Endriss
Add support for KNC TV Station Plus X4, sub-system id 0x1894:0x0015. Based on a patch submitted by Johannes Deisenhofer. Thanks-to: Johannes Deisenhofer <jo.deisenhofer@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7110): Trivial printf warning fix (radio-si470)Tobias Lorenz
Thanks to Darren Salt <linux@youmustbejoking.demon.co.uk> for pointing this issue. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7108): radio-si470x.c: check-after-useTobias Lorenz
Adrian used the coverity checker against radio-si470x and found this: > The Coverity checker spotted the following check-after-use in > drivers/media/radio/radio-si470x.c: > > <-- snip --> > static void si470x_usb_driver_disconnect(struct usb_interface *intf) > { > struct si470x_device *radio = usb_get_intfdata(intf); > > del_timer_sync(&radio->timer); <------------------ > flush_scheduled_work(); > > usb_set_intfdata(intf, NULL); > if (radio) { <------------------ > video_unregister_device(radio->videodev); > kfree(radio->buffer); > kfree(radio); > } > } > <-- snip --> > > Either "radio" can be NULL and this case has to be properly handled or > the NULL check is not required. These two lines should indeed better be inside the if statement. Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7106): em28xx/: make 2 functions staticAdrian Bunk
This patch makes the following needlessly global functions static: - em28xx-core.c:em28xx_write_reg_bits() - em28xx-video.c:em28xx_vdev_init() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7104): stk-sensor.c: make 2 functions staticAdrian Bunk
This patch makes the following needlessly global functions static: - stk_sensor_outb() - stk_sensor_inb() Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7103): make stk_camera_cleanup() staticAdrian Bunk
stk_camera_cleanup() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7102): make tuner-core.c:tuner_list staticAdrian Bunk
tuner_list can become static - and it's anyway a way too generic name for a global variable - see commit b00ef4b8d8c29bfb5f6f92ee60bc04b604f36ef2 for a completely different global variable of the same name I just made static... Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7100): frontends/tda18271-common.c: fix off-by-oneAdrian Bunk
This patch fixes an off-by-one error spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18V4L/DVB (7097): saa7134-dvb: add missing dvb_attach call (for tda10046_attach)Matthias Schwarzott
saa7134-dvb: add missing dvb_attach around tda10046_attach This patch adds a possibly missing dvb_attach for tda10046_attach. This removes the hard dependency of saa7134-dvb on tda1004x module. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 21:18:04 +0000