summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-07-09cxgb3: Fix crash caused by stashing wrong netdev_queueRoland Dreier
Commit c3a8c5b6 ("cxgb3: move away from LLTX") exposed a bug in how cxgb3 looks up the netdev_queue it stashes away in a qset during initialization. For multiport devices, the TX queue index it uses is offset by the first_qset index of each port. This leads to a crash once LLTX is removed, since hard_start_xmit is called with one TX queue lock held, while the TX reclaim timer task grabs a different (wrong) TX queue lock when it frees skbs. Fix this by removing the first_qset offset used to look up the TX queue passed into t3_sge_alloc_qset() from setup_sge_qsets(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09ixgbe: Fix coexistence of FCoE and Flow Director in 82599Yi Zou
Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR) in 82599 and remove the disabling of FDIR when FCoE is enabled. Currently, FDIR is turned off when FCoE is enabled under the assumption that FCoE is always enabled with DCB being turned on. However, FDIR does not have to be turned off all the time when FCoE is enabled since FCoE can be enabled without DCB being turned on, e.g., use link pause only. This patch makes sure that when DCB is turned on or off, FDIR is turned on or off correspondingly; and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR set up properly so FCoE and FDIR can coexist regardless of DCB being on or off. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-07-08p54: tx refused but queue activeLarry Finger
In the mainline kernel, p54usb will fail because the TX queue length can become < 0. This problem has been reported as Bugzilla #13725. The failure is expressed by the following message in the logs: WARNING: at net/mac80211/tx.c:1325 ieee80211_tx+0x23c/0x298 [mac80211]() Hardware name: HP Pavilion dv2700 Notebook PC tx refused but queue active This problem has been recently observed in the wireless-testing tree, where a full solution is being tested. That fix is too invasive for 2.6.31-rcX, but the simple change supplied here will prevent the failure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08Atheros Kconfig needs to be dependent on WLAN_80211Jay Sternberg
Atheros top level menu needs a "depends WLAN_80211" to properly indent within menuconfig and xconfig interfaces. This is purely a visual issue but it effects all subsequent drivers. The issue is the top level menu does not include a dependency on WLAN_80211 so within the tree structure, Atheros is at the same level as WLAN_80211 but when WLAN_80211 collapsed, the menu disappears along with all subsequent drives, so it is really a subordinate. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08mac80211_hwsim: avoid NULL accessJohannes Berg
There's a race condition -- started can be set to true before channel is set due to the way mac80211 callbacks currently work (->start should probably pass the channel we would like to have initially). For now simply add a check to hwsim to avoid dereferencing the NULL channel pointer. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08ssb: Add support for 4318EClyde McPherson
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The 4318E can do 802.11A/B/G, only B and G mode are supported in b43. Signed-off-by: Clyde McPherson <ccmcphe@verizon.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08b43: Add support for 4318EClyde McPherson
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The 4318E can do 802.11A/B/G, only B and G mode are supported in b43. Signed-off-by: Clyde McPherson <ccmcphe@verizon.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b deviceHin-Tak Leung
Yevgen Kotikov reported success on the sourceforge zd1211-devs list with the following details: Brand/retail: SONY IFU-WLM2 USB-IDs: Vendor: 0x054C Device: 0x0257 chip ID: zd1211b chip 054c:0257 v4802 high 00-0b-6b AL2230_RF pa0 ----- FCC ID: unknown Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Yevgen Kotikov <yevgen.kotikov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08zd1211rw: 07b8:6001 is a ZD1211BPascal Terjan
On a shuttle machine here we got 07b8:6001 device, handled by zd1211rw, which does not work. Scanning is OK but association does not work, we get "direct probe to AP xxx timed out" It appears that this simple patch makes the device work perfectly. This id was already there in initial import of the driver so I don't know if it has ever been working as ZD1211 (which would mean they changed it and kept the id :( ). Signed-off-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08r6040: bump driver version to 0.24 and date to 08 July 2009Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08r6040: restore MIER register correctly when IRQ line is sharedFlorian Fainelli
When the r6040 device IRQ line is shared we will enter the driver interrupt service routine, mask off the device interrupt enable register (MIER) and return with IRQ_NONE, we would then leave the device with interrupts disabled, this patch fixes that issue. Reported-by: Steve Holland <sdh4@iastate.edu> Signed-off-by: Joe Chou <joe.chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08davinci_emac: fix kernel oops when changing MAC address while interface is downPablo Bitton
Check that network interface is running before changing its MAC address. Otherwise, rxch is accessed when it's NULL - causing a kernel oops. Moreover, check that the new MAC address is valid. Signed-off-by: Pablo Bitton <pablo.bitton@gmail.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Tested-by: Chaithrika U S <chaithrika@ti.com> [tested on DM6467 EVM] Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08igb: set lan id prior to configuring phyAlexander Duyck
The igb driver was defaulting to using the lock for pci-e function 0 for all of the phys due to the fact that the lan id was not being set prior to initialization. This change makes it so that the function id is set prior to checking for the phy id. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-07hp-wmi: fix rfkill bugJohannes Berg
Fix the third (I think) polarity error I accidentally introduced in the rfkill rewrite to make wireless work again on (certain?) HP laptops. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07iwmc3200wifi: add Kconfig helpSamuel Ortiz
We're missing a Kconfig help for the iwmc3200wifi driver. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07ath9k: Fix leak in tx descriptorVasanthakumar Thiagarajan
When we reclaim the tx desc, we always assume that the last desc is a holding desc, which is not true, and skip it. If the tx queue is drained during channel change, internal reset and etc, the last descriptor may not be the holding descriptor and we fail to reclaim them. This results in the following two issues. 1. Tx stuck - We drop all the frames coming from upper layer due to shortage in tx desc. 2. Crash - If we fail to reclaim a tx descriptor, we miss to update the tx BA window with the seq number of the frame associated to that desc, which, at some point, result in the following crash due to an assert failure in ath_tx_addto_baw(). This patch fixes these two issues. kernel BUG at ../drivers/net/wireless/ath/ath9k/xmit.c:180! [155064.304164] invalid opcode: 0000 [#1] SMP Call Trace: [<fbc6d83b>] ? ath9k_tx+0xeb/0x160 [ath9k] [<fbbc9591>] ipv6? __ieee80211_tx+0x41/0x120 [mac80211] [<fbbcb5ae>] ? aes_i586ieee80211_master_start_xmit+0x28e/0x560 [mac80211] [<c037e501>] aes_generic? _spin_lock_irqsave+0x31/0x40 [<c02f347b>] ? dev_hard_start_xmit+0x16b/0x1c0 [<c03058b5>] ? __qdisc_run+0x1b5/0x200 [<fbbcda5a>] ? af_packetieee80211_select_queue+0xa/0x100 [mac80211] [<c02f53b7>] ? i915dev_queue_xmit+0x2e7/0x3f0 [<fbbc9b49>] ? ieee80211_subif_start_xmit+0x369/0x7a0 [mac80211] [<c031bc35>] ? ip_output+0x55/0xb0 [<c02e0188>] ? show_memcpy_count+0x18/0x60 [<c02eb186>] ? __kfree_skb+0x36/0x90 [<c02f2202>] ? binfmt_miscdev_queue_xmit_nit+0xd2/0x110 [<c02f347b>] ? dev_hard_start_xmit+0x16b/0x1c0 [<c03058b5>] ? __qdisc_run+0x1b5/0x200 [<c033bca7>] ? scoarp_create+0x57/0x2a0 [<c02f53b7>] ? bridgedev_queue_xmit+0x2e7/0x3f0 [<c03034a0>] ? eth_header+0x0/0xc0 [<c033b95f>] stp? arp_xmit+0x5f/0x70 [<c033bf4f>] ? arp_send+0x5f/0x70 [<c033c8f5>] bnep? arp_solicit+0x105/0x210 [<c02fa5aa>] ? neigh_timer_handler+0x19a/0x390 [<c013bf88>] ? run_timer_softirq+0x138/0x210 [<c02fa410>] ? ppdevneigh_timer_handler+0x0/0x390 [<c02fa410>] ? neigh_timer_handler+0x0/0x390 Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07b43/b43legacy: fix radio LED initializationLarry Finger
Fix condition in which radio LED did not initialize correctly, and remove 4 compilation warnings. After the recent changes in rfkill, the radio LED used by b43/b43legacy did not always initialize correctly. Both b43 and b43legacy used the deprecated variable radio_enabled in struct ieee80211_conf. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-06fec: fix definition of 5272 version of FEC_X_DES_ACTIVE registerGreg Ungerer
fec: fix definition of 5272 version of FEC_X_DES_ACTIVE register The ColdFire 5272 FEC driver has a different register address map than other users of the FEC driver. And its definition of the FEC_X_DES_ACTIVE register is incorrect, it should be 0x14. The fec interface cannot transmit data with the old value. Signed-off-by: Greg Ungerer <gerg@uclinux.org> ---- Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06fec: remove extra ";" from definition namesGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06Revert "p54: Use SKB list handling helpers instead of by-hand code."David S. Miller
This reverts commit a1091aae19b1d9c85d91c86915a611387f67a26b.
2009-07-06tun/tap: Fix crashes if open() /dev/net/tun and then poll() it.Mariusz Kozlowski
Fix NULL pointer dereference in tun_chr_pool() introduced by commit 33dccbb050bbe35b88ca8cf1228dcf3e4d4b3554 ("tun: Limit amount of queued packets per device") and triggered by this code: int fd; struct pollfd pfd; fd = open("/dev/net/tun", O_RDWR); pfd.fd = fd; pfd.events = POLLIN | POLLOUT; poll(&pfd, 1, 0); Reported-by: Eugene Kapun <abacabadabacaba@gmail.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05forcedeth: Fix NAPI race.Eric Dumazet
Eric Dumazet a écrit : > Ingo Molnar a écrit : >>> The following changes since commit 52989765629e7d182b4f146050ebba0abf2cb0b7: >>> Linus Torvalds (1): >>> Merge git://git.kernel.org/.../davem/net-2.6 >>> >>> are available in the git repository at: >>> >>> master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git master >> Hm, something in this lot quickly wrecked networking here - see the >> tx timeout dump below. It starts with: >> >> [ 351.004596] WARNING: at net/sched/sch_generic.c:246 dev_watchdog+0x10b/0x19c() >> [ 351.011815] Hardware name: System Product Name >> [ 351.016220] NETDEV WATCHDOG: eth0 (forcedeth): transmit queue 0 timed out >> >> Config attached. Unfortunately i've got no time to do bisection >> today. > > > > forcedeth might have a problem, in its netif_wake_queue() logic, but > I could not see why a recent patch could make this problem visible now. > > CPU0/1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 > is not a new cpu either :) > > forcedeth uses an internal tx_stop without appropriate barrier. > > Could you try following patch ? > > (random guess as I dont have much time right now) We might have a race in napi_schedule(), leaving interrupts disabled forever. I cannot test this patch, I dont have the hardware... Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05drivers/net/smsc911x.c: Fix resource size off by 1 errorJulia Lawall
The call resource_size(res) returns res->end - res->start + 1 and thus the second change is semantics-preserving. res_size is then used as the second argument of a call to request_mem_region, and the memory allocated by this call appears to be the same as what is released in the two calls to release_mem_region. So the size argument for those calls should be resource_size(size) as well. Alternatively, in the second call to release_mem_region, the second argument could be res_size, as that variable has already been initialized at the point of this call. The problem was found using the following semantic patch: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) @@ struct resource *res; @@ - res->end - res->start + BAD(resource_size(res)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05pcnet_cs: add new idKen Kawasaki
add new id (RIOS System PC CARD3 ETHERNET). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05bnx2x: Fix the maximal values of coalescing timeouts.Eilon Greenstein
This patch properly defines the maximum values for rx/tx coalescing timeouts. Signed-off-by: Vlad Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05bnx2x: Disable HC coalescing when setting timeout to zero.Eilon Greenstein
Problem reported by Flavio Leitner <fleitner@redhat.com>: When setting rx/tx coalescing timeout to the values less than 12 traffic was stopped. The FW supports coalescing in 12us granularity, and so value of less then 12 should be interpreted as disabling coalescing Signed-off-by: Vlad Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05tun: Fix device unregister raceHerbert Xu
It is currently possible for an asynchronous device unregister to cause the same tun device to be unregistered twice. This is because the unregister in tun_chr_close only checks whether __tun_get(tfile) != NULL. This however has nothing to do with whether the device has already been unregistered. All it tells you is whether __tun_detach has been called. This patch fixes this by using the most obvious thing to test whether the device has been unregistered. It also moves __tun_detach outside of rtnl_unlock since nothing that it does requires that lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03be2net: fix spurious interrupt handling in intx modeSathya Perla
Occasionally we may see an interrupt without an event in the eq. In intx, we currently see the event queue and return IRQ_NONE causing a the irq to be disabled ("no one cared".) Instead, read the CEV_ISR reg to check the existence of the interrupt. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: disable K1 at 1000Mbps for 82577/82578Bruce Allan
This workaround is required for an issue in hardware where noise on the interconnect between the MAC and PHY could be generated by a lower power mode (K1) at 1000Mbps resulting in bad packets. Disable K1 while at 1000 Mbps but keep it enabled for 10/100Mbps and when the cable is disconnected. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: delay second read of PHY_STATUS register on failure of first readBruce Allan
Some PHYs may require two reads of the PHY_STATUS register to determine the link status. If the PHY is being accessed by another thread it is possible the first read could timeout and fail. In this case, put a delay in so the second read will pick up the correct link status. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: prevent NVM corruption on sectors larger than 4KBruce Allan
Limit NVM writes to 4K sections to prevent NVM corruption on larger sector allocations (up to 64K). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: do not write SmartSpeed register bits on parts without supportBruce Allan
The driver was accessing register bits for features on parts that do not support that feature. This could cause problems in the hardware. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: delay after LCD reset and proper checks for PHY configuration doneBruce Allan
A previous workaround for 82578 to avoid link stall causes some PHY registers to get cleared inadvertently. Add a delay after all LCD resets to make sure PHY registers are in a stable state before continuing. Also, after resets check the EEC register for the state of PHY configuration performed by the MAC for ICH9 and earlier parts (as done before), but check the LAN_INIT_DONE bit in the STATUS register for ICH10 and newer parts (EEC doesn't exist in these newer parts). Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03e1000e: PHY loopback broken on 82578Bruce Allan
PHY loopback on 82578 fails to work as a result of flushing the packets in the FIFO buffer in the link stall workaround. Don't perform the workaround if in PHY loopback mode. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: Not allow 8259x unsupported wol options change from ethtoolMallikarjuna R Chilakala
Wake-on-lan is currently only supported by 82599 KX4 devices, in all other cases return a proper value from ixgbe_wol_exclusion function call. Otherwise from ethtool we will be able to change wol options of unsupported 8259x devices. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: fix inconsistent SFP/SFP+ failure results.Don Skidmore
Currently if we loaded the driver, insert an unsupported module, and then attempt to "ifconfig up" the device it will be brought down but the netdev would not be unregistered. This behavior is different than all other code paths. This patch corrects that by down'ing the device and then scheduling the sfp_config_module_task tasklet. The tasklet will detect this condition (like it does with other code paths) and do the unregister_netdev(). I also removed the log message as this condition (an unsupported SFP+ module) will be logged in sfp_config_module_task. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: fix regression on some 82598 adaptersDon Skidmore
The change to check the SFP+ module again on open() was causing the XFP (non-SFP+) adapters to be rejected. We only want to try and re-identify the SFP+ module if the original probe found that this device was an SFP+ device. So for this code path (driver loaded with SFP module, module inserted, ifconfig up of the device) the type will be ixgbe_phy_unknown for an unidentified SFP+ module. So we only check if that is the case. This problem also shows up on Copper devices. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03ixgbe: fix issues with failing to detect insert of unsupported moduleDon Skidmore
Several small fixes around negative test case of the insertion of a IXGBE_ERR_NOT_SUPPORTED module. - mdio45_probe call was always failing due to mdio.prtad not being set. The function set to mdio.mdio_read was still working as we just happen to always be at prtad == 0. This will allow us to set the phy_id and phy.type correctly now. - There was timing issue with i2c calls when initiated from a tasklet. A small delay was added to allow the electrical oscillation to calm down. - Logic change in ixgbe_sfp_task that allows NOT_SUPPORTED condition to be recognized. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix sizeof usage.Ron Mercer
Some usage was only sizing a pointer rather than the data type. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Add/use function for link up/down.Ron Mercer
We need to set/clear the mac address register when the link goes up/down respectively. Without this both ports of a 2-port device can end up with the same mac address in a bonding scenario. The new ql_link_on() and ql_link_off() will also be used in handling certain firmware events. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix MAC address bonding issue.Ron Mercer
This addes functionality to set/clear the MAC address in the hardware when the link goes up/down. The MAC address register is persistent across function resets. In bonding the same address can bounce from one port to the other. This can cause packets to be delivered to the wrong port. This patch clears the MAC address in the hardware when the link is down and sets it when the link comes up. It was found that pulling/pushing the cable from one port to another causes the same MAC address to be in both ports. The next patch in this series will use this functionality as well. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix tx byte counter.Ron Mercer
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix redundant call to free resources.Ron Mercer
The caller will free acquired resouces if a failure occurs. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Fix carrier on condition.Ron Mercer
We were turning on the carrier without verifying the link was up. This adds link up to the link initialize check before turning carrier on. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Clear frame to queue routing before reset.Ron Mercer
Not clearing the routing bits can cause frames to erroneously get routed to management processor. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03qlge: Expand coverage of hw lock for config register.Ron Mercer
The hardware semaphore covers the configuration register as well as the ICB registers. The ICB high and low regs contain the address of the initialization control block and the config register is used to signal the hardware that a block is ready to be downloaded. Currently we were only protecting the ICB regs. This changes expands to cover the config register as well. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-02phylib: fixes for PHY_RESUMING state changesWade Farnsworth
The PHY_HALTED state disables phydev->link, but the link will not be updated upon entering PHY_RESUMING. Add a call to phy_read_status() to update the link before entering PHY_RUNNING. If the link is not up at this point, enter the PHY_NOLINK state instead. Also, when transitioning from PHY_RESUMING to PHY_RUNNING, calls to netif_carrier_on() and phydev->adjust_link() are missing. Add the calls similar to the other transitions to PHY_RUNNING. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-02netxen: avoid frequent firmware resetDhananjay Phadke
Restrict firmware reset to following cases - o chip rev is NX2031 (firmare doesn't support heartbit). o firmware is dead. o previous attempt to init firmware had failed. o we have got newer file firmware. This speeds up module load tremendously (by upto 8 sec), also avoids downtime for NCSI (management) pass-thru traffic. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-02netxen: fix the version code macroDhananjay Phadke
Correct firmware encoding is 8 bit major, 8 bit minor and 16 bit subversion. Flash has sizes rightly set, but original driver submission messed it leaving 16 bit major and 8 bit subversion. Also fix a infinite loop when cut-thru file firmware is invalid. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-18 15:49:09 +0000