summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-09-26Merge tag 'bypass' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into for-3.7 regulator: Bypass mode support Allow regulators to be put into a non-regulating mode bypassing the input straight to the output, mostly used by low power retention modes.
2012-09-22Merge tag 'v3.6-rc6' into for-3.7Mark Brown
Linux 3.6-rc6 has all our bug fixes. Conflicts (trivial overlap): sound/soc/omap/am3517evm.c
2012-09-22Input: twl4030-vibra: Support for DT booted kernelPeter Ujfalusi
Add support when the kernel has been booted with DT blob. In this case the pdata is NULL, we need to reach up to the core node and check if the codec part has been enabled to determine if we need to coexist with the codec or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Add DT supportPeter Ujfalusi
Support for loading the twl4030 audio module via devicetree. Sub devices for codec and vibra will be created as mfd devices once the core MFD driver is loaded when the kernel is booted with a DT blob. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Get audio MCLK via twl-core API instead of pdataPeter Ujfalusi
twl-core has API to get the boot time configured HFCLK rate which has the same rate as the audio MCLK. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl-core: Add API to query the HFCLK ratePeter Ujfalusi
CFG_BOOT register's HFCLK_FREQ field hold information about the used HFCLK frequency. Add possibility for users to get the configured rate based on this register. This register was configured during boot, without it the chip would not operate correctly, so we can trust on this information. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Rearange and clean-up the probe functionPeter Ujfalusi
To facilitate the device tree support the probe function need to be rearanged. Small cleanup in the APLL frequency selection part as well. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Convert to use devm_kzallocPeter Ujfalusi
To clean up the module probe and remove functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22mfd: twl4030-audio: Clean up MODULE_* and platform_driver partPeter Ujfalusi
Place the MODULE_* lines in the same block and add MODULE_DESCRIPTION. Rearange the platform_driver structure at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: omap-dma: Add support to suppress interrupts in cyclic modePeter Ujfalusi
When requested (DMA_PREP_INTERRUPT is cleared in flags) disable all DMA interrupts for the channel. In this mode user space does not expect periodic reports from kernel about the progress of the audio stream. PulseAudio for example support this type of mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: Pass flags via device_prep_dma_cyclic() callbackPeter Ujfalusi
Change the parameter list of device_prep_dma_cyclic() so the DMA drivers can receive the flags coming from clients. This feature can be used during audio operation to disable all audio related interrupts when the DMA_PREP_INTERRUPT is cleared from the flags. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: omap: Add support for pause/resume in cyclic dma modePeter Ujfalusi
The audio stack used omap_stop_dma/omap_start_dma to pause/resume the DMA. This method has been used for years on OMAP based products. We only allow pause/resume when the DMA has been configured in cyclic mode which is used by the audio stack. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-22dmaengine: omap: Support for element mode in cyclic DMAPeter Ujfalusi
When src_maxburst/dst_maxburst is set to 0 by the users of cyclic DMA (mostly audio) indicates that we should configure the omap DMA to element sync mode instead of packet mode. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-16Merge tag 'mfd-for-linus-3.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull mfd fixes from Samuel Ortiz: "This is the remaining MFD fixes for 3.6, with 5 pending fixes: - A tps65217 build error fix. - A lcp_ich regression fix caused by the MFD driver failing to initialize the watchdog sub device due to ACPI conflicts. - 2 MAX77693 interrupt handling bug fixes. - An MFD core fix, adding an IRQ domain argument to the MFD device addition API in order to prevent silent and potentially harmful remapping behaviour changes for drivers supporting non-DT platforms." * tag 'mfd-for-linus-3.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: MAX77693: Fix NULL pointer error when initializing irqs mfd: MAX77693: Fix interrupt handling bug mfd: core: Push irqdomain mapping out into devices mfd: lpc_ich: Fix a 3.5 kernel regression for iTCO_wdt driver mfd: Move tps65217 regulator plat data handling to regulator
2012-09-16Merge tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull pwm fixes from Thierry Reding: "While this comes a bit later than I had wished, both patches are rather minor and touch only new drivers so I think these are still safe for merging." * tag 'for-3.6-rc6' of git://gitorious.org/linux-pwm/linux-pwm: pwm: pwm-tiehrpwm: Fix conflicting channel period setting pwm: pwm-tiecap: Disable APWM mode after configure
2012-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull scsi target fixes from Nicholas Bellinger: "Here is the current set of target-pending fixes headed for v3.6-final The main parts of this series include bug-fixes from Paolo Bonzini to address an use-after-free bug in pSCSI sense exception handling, along with addressing some long-standing bugs wrt the handling of zero- length SCSI CDB payloads also specific to pSCSI pass-through device backends." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: go through normal processing for zero-length REQUEST_SENSE target: support zero allocation length in REQUEST SENSE target: support zero-size allocation lengths in transport_kmap_data_sg target: fail REPORT LUNS with less than 16 bytes of payload target: report too-small parameter lists everywhere target: go through normal processing for zero-length PSCSI commands target: fix use-after-free with PSCSI sense data target: simplify code around transport_get_sense_data target: move transport_get_sense_data target: Check idr_get_new return value in iscsi_login_zero_tsih_s1 target: Fix ->data_length re-assignment bug with SCSI overflow
2012-09-16Merge tag 'pm-for-3.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael J. Wysocki: "Three ACPI device power management fixes related to checking and setting device power states." * tag 'pm-for-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Use KERN_DEBUG when no power resources are found ACPI / PM: Fix resource_lock dead lock in acpi_power_on_device ACPI / PM: Infer parent power state from child if unknown, v2
2012-09-16mfd: MAX77693: Fix NULL pointer error when initializing irqsChanwoo Choi
This patch initialize register map of MUIC device because mfd driver of Maxim MAX77693 use regmap-muic instance of MUIC device when irqs of Maxim MAX77693 is initialized before call max77693-muic probe() function. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-16mfd: MAX77693: Fix interrupt handling bugChanwoo Choi
This patch fix bug related to interrupt handling for MAX77693 devices. - Unmask interrupt masking bit for charger/flash/muic to revolve that interrupt isn't happened when external connector is attached. - Fix wrong regmap instance when muic interrupt is happened. This patch were discussed and confirm discussion about this patch on below url: http://lkml.org/lkml/2012/7/16/118 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-15mfd: core: Push irqdomain mapping out into devicesMark Brown
Currently the MFD core supports remapping MFD cell interrupts using an irqdomain but only if the MFD is being instantiated using device tree and only if the device tree bindings use the pattern of registering IPs in the device tree with compatible properties. This will be actively harmful for drivers which support non-DT platforms and use this pattern for their DT bindings as it will mean that the core will silently change remapping behaviour and it is also limiting for drivers which don't do DT with this particular pattern. There is also a potential fragility if there are interrupts not associated with MFD cells and all the cells are omitted from the device tree for some reason. Instead change the code to take an IRQ domain as an optional argument, allowing drivers to take the decision about the parent domain for their interrupts. The one current user of this feature is ab8500-core, it has the domain lookup pushed out into the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds
Pull x86 platform driver updates from Matthew Garrett: "A few small updates for 3.6 - a trivial regression fix and a couple of conformance updates for the gmux driver, plus some tiny fixes for asus-wmi, eeepc-laptop and thinkpad_acpi." * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: thinkpad_acpi: buffer overflow in fan_get_status() eeepc-laptop: fix device reference count leakage in eeepc_rfkill_hotplug() platform/x86: fix asus_laptop.wled_type description asus-laptop: HRWS/HWRS typo drivers-platform-x86: remove useless #ifdef CONFIG_ACPI_VIDEO apple-gmux: Fix port address calculation in gmux_pio_write32() apple-gmux: Fix index read functions apple-gmux: Obtain version info from indexed gmux
2012-09-14Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds
git://git.pengutronix.de/git/wsa/linux Pull i2c embedded fixes from Wolfram Sang: "The last bunch of (typical) i2c-embedded driver fixes for 3.6. Also update the MAINTAINERS file to point to my tree since people keep asking where to find their patches." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: algo: pca: Fix mode selection for PCA9665 MAINTAINERS: fix tree for current i2c-embedded development i2c: mxs: correctly setup speed for non devicetree i2c: pnx: Fix read transactions of >= 2 bytes i2c: pnx: Fix bit definitions
2012-09-14Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Fix word size register read and write operations in ina2xx driver, and initialize uninitialized structure elements in twl4030-madc-hwmon driver." * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ina2xx) Fix word size register read and write operations hwmon: (twl4030-madc-hwmon) Initialize uninitialized structure elements
2012-09-14Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "I realise this a bit bigger than I would want at this point. Exynos is a large chunk, I got them to half what they wanted already, and hey its ARM based, so not going to hurt many people. Radeon has only two fixes, but the PLL fixes were a bit bigger, but required for a lot of scenarios, the fence fix is really urgent. vmwgfx: I've pulled in a dumb ioctl support patch that I was going to shove in later and cc stable, but we need it asap, its mainly to stop mesa growing a really ugly dependency in userspace to run stuff on vmware, and if I don't stick it in the kernel now, everyone will have to ship ugly userspace libs to workaround it. nouveau: single urgent fix found in F18 testing, causes X to not start properly when f18 plymouth is used i915: smattering of fixes and debug quieting gma500: single regression fix So as I said a bit large, but its fairly well scattered and its all stuff I'll be shipping in F18's 3.6 kernel." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (26 commits) drm/nouveau: fix booting with plymouth + dumb support drm/radeon: make 64bit fences more robust v3 drm/radeon: rework pll selection (v3) drm: Drop the NV12M and YUV420M formats drm/exynos: remove DRM_FORMAT_NV12M from plane module drm/exynos: fix double call of drm_prime_(init/destroy)_file_private drm/exynos: add dummy support for dmabuf-mmap drm/exynos: Add missing braces around sizeof in exynos_mixer.c drm/exynos: Add missing braces around sizeof in exynos_hdmi.c drm/exynos: Make g2d_pm_ops static drm/exynos: Add dependency for G2D in Kconfig drm/exynos: fixed page align bug. drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/exynos: Use devm_* functions in exynos_drm_g2d.c file drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file drm/exynos: Remove redundant check in exynos_drm_fimd.c file drm/exynos: Remove redundant check in exynos_hdmi.c file vmwgfx: add dumb ioctl support gma500: Fix regression on Oaktrail devices ...
2012-09-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Use after free and new device IDs in bluetooth from Andre Guedes, Yevgeniy Melnichuk, Gustavo Padovan, and Henrik Rydberg. 2) Fix crashes with short packet lengths and VLAN in pktgen, from Nishank Trivedi. 3) mISDN calls flush_work_sync() with locks held, fix from Karsten Keil. 4) Packet scheduler gred parameters are reported to userspace improperly scaled, and WRED idling is not performed correctly. All from David Ward. 5) Fix TCP socket refcount problem in ipv6, from Julian Anastasov. 6) ibmveth device has RX queue alignment requirements which are not being explicitly met resulting in sporadic failures, fix from Santiago Leon. 7) Netfilter needs to take care when interpreting sockets attached to socket buffers, they could be time-wait minisockets. Fix from Eric Dumazet. 8) sock_edemux() has the same issue as netfilter did in #7 above, fix from Eric Dumazet. 9) Avoid infinite loops in CBQ scheduler with some configurations, from Eric Dumazet. 10) Deal with "Reflection scan: an Off-Path Attack on TCP", from Jozsef Kadlecsik. 11) SCTP overcharges socket for TX packets, fix from Thomas Graf. 12) CODEL packet scheduler should not reset it's state every time it builds a new flow, fix from Eric Dumazet. 13) Fix memory leak in nl80211, from Wei Yongjun. 14) NETROM doesn't check skb_copy_datagram_iovec() return values, from Alan Cox. 15) l2tp ethernet was using sizeof(ETH_HLEN) instead of plain ETH_HLEN, oops. From Eric Dumazet. 16) Fix selection of ath9k chips on which PA linearization and AM2PM predistoration are used, from Felix Fietkau. 17) Flow steering settings in mlx4 driver need to be validated properly, from Hadar Hen Zion. 18) bnx2x doesn't show the correct link duplex setting, from Yaniv Rosner. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) pktgen: fix crash with vlan and packet size less than 46 bnx2x: Add missing afex code bnx2x: fix registers dumped bnx2x: correct advertisement of pause capabilities bnx2x: display the correct duplex value bnx2x: prevent timeouts when using PFC bnx2x: fix stats copying logic bnx2x: Avoid sending multiple statistics queries net: qmi_wwan: call subdriver with control intf only net_sched: gred: actually perform idling in WRED mode net_sched: gred: fix qave reporting via netlink net_sched: gred: eliminate redundant DP prio comparisons net_sched: gred: correct comment about qavg calculation in RIO mode mISDN: Fix wrong usage of flush_work_sync while holding locks netfilter: log: Fix log-level processing net-sched: sch_cbq: avoid infinite loop net: qmi_wwan: fix Gobi device probing for un2430 net: fix net/core/sock.c build error ixp4xx_hss: fix build failure due to missing linux/module.h inclusion caif: move the dereference below the NULL test ...
2012-09-14Merge tag 'usb-3.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here are a number of USB patches, a bit more than I normally like this late in the -rc series, but given people's vacations (myself included), and the kernel summit, it seems to have happened this way. All are tiny, but they add up. A number of gadget and xhci fixes, and a few new device ids. All have been tested in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low usb: chipidea: cleanup dma_pool if udc_start() fails usb: chipidea: udc: fix error path in udc_start() usb: chipidea: udc: add pullup fuction, needed by the uvc gadget usb: chipidea: udc: fix setup of endpoint maxpacket size USB: option: replace ZTE K5006-Z entry with vendor class rule EHCI: Update qTD next pointer in QH overlay region during unlink USB: cdc-wdm: fix wdm_find_device* return value USB: ftdi_sio: do not claim CDC ACM function usb: dwc3: gadget: fix pending isoc handling usb: renesas_usbhs: fixup DMA transport data alignment usb: gadget: at91udc: Don't check for ep->ep.desc usb: gadget: at91udc: don't overwrite driver data usb: dwc3: core: fix incorrect usage of resource pointer usb: musb: musbhsdma: fix IRQ check usb: musb: tusb6010: fix error path in tusb_probe() usb: musb: host: fix for musb_start_urb Oops usb: gadget: dummy_hcd: add support for USB_DT_BOS on rh usb: gadget: dummy_hcd: fixup error probe path usb: gadget: s3c-hsotg.c: fix error return code ...
2012-09-14Merge tag 'tty-3.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY fixes from Greg Kroah-Hartman: "Here are 2 tiny patches for a serial driver to resolve issues that people have reported with the 3.6-rc tree. Both of these have been in the linux-next tree for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: imx: don't reinit clock in imx_setup_ufcr() tty: serial: imx: console write routing is unsafe on SMP
2012-09-14Merge tag 'staging-3.6-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fixes from Greg Kroah-Hartman: "Here are a few staging tree fixes for problems that have been reported. Nothing major, just a number of tiny driver fixes. All of these have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: drm/omap: add more new timings fields drm/omap: update for interlaced staging: r8712u: fix bug in r8712_recv_indicatepkt() staging: zcache: fix cleancache race condition with shrinker Staging: Android alarm: IOCTL command encoding fix staging: vt6656: [BUG] - Failed connection, incorrect endian. staging: ozwpan: fix memcmp() test in oz_set_active_pd() staging: wlan-ng: Fix problem with wrong arguments staging: comedi: das08: Correct AO output for das08jr-16-ao staging: comedi: das08: Correct AI encoding for das08jr-16-ao staging: comedi: das08: Fix PCI ref count staging: comedi: amplc_pci230: Fix PCI ref count staging: comedi: amplc_pc263: Fix PCI ref count staging: comedi: amplc_pc236: Fix PCI ref count staging: comedi: amplc_dio200: Fix PCI ref count staging: comedi: amplc_pci224: Fix PCI ref count drivers/iio/adc/at91_adc.c: adjust inconsistent IS_ERR and PTR_ERR staging iio: fix potential memory leak in lis3l02dq_ring.c staging:iio: prevent divide by zero bugs
2012-09-14ACPI / PM: Use KERN_DEBUG when no power resources are foundAaron Lu
commit a606dac368eed5696fb38e16b1394f1d049c09e9 adds support to link devices which have _PRx, if a device does not have _PRx, a warning message will be printed. This commit is for ZPODD on Intel ZPODD capable platforms, on other platforms, it has no problem if there is no power resource for this device, so a warning here is not appropriate, change it to debug. Reported-by: Borislav Petkov <bp@amd64.org> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-14i2c: algo: pca: Fix mode selection for PCA9665Thomas Kavanagh
The code currently always selects turbo mode for PCA9665, no matter which clock frequency is configured. This is because it compares the clock frequency against constants reflecting (boundary / 100). Compare against real boundary frequencies to fix the problem. Signed-off-by: Thomas Kavanagh <tkavanagh@juniper.net> Signed-off-by: Guenter Roeck <groeck@juniper.net> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-09-14drm/nouveau: fix booting with plymouth + dumb supportDave Airlie
We noticed a plymouth bug on Fedora 18, and I then noticed this stupid thinko, fixing it fixed the problem with plymouth. Cc: stable@vger.kernel.org Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-14ACPI / PM: Fix resource_lock dead lock in acpi_power_on_deviceLin Ming
Commit 0090def("ACPI: Add interface to register/unregister device to/from power resources") used resource_lock to protect the devices list that relies on power resource. It caused a mutex dead lock, as below acpi_power_on ---> lock resource_lock __acpi_power_on acpi_power_on_device acpi_power_get_inferred_state acpi_power_get_list_state ---> lock resource_lock This patch adds a new mutex "devices_lock" to protect the devices list and calls acpi_power_on_device in acpi_power_on, instead of __acpi_power_on, after the resource_lock is released. [rjw: Changed data type of a boolean variable to bool.] Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-14ACPI / PM: Infer parent power state from child if unknown, v2Rafael J. Wysocki
It turns out that there are ACPI BIOSes defining device objects with _PSx and without either _PSC or _PRx. For devices corresponding to those ACPI objetcs __acpi_bus_get_power() returns ACPI_STATE_UNKNOWN and their initial power states are regarded as unknown as a result. If such a device is a parent of another power-manageable device, the child cannot be put into a low-power state through ACPI, because __acpi_bus_set_power() refuses to change power states of devices whose parents' power states are unknown. To work around this problem, observe that the ACPI power state of a device cannot be higher-power (lower-number) than the power state of its parent. Thus, if the device's _PSC method or the configuration of its power resources indicates that the device is in D0, the device's parent has to be in D0 as well. Consequently, if the parent's power state is unknown when we've just learned that its child's power state is D0, we can safely set the parent's power.state field to ACPI_STATE_D0. Tested-by: Aaron Lu <aaron.lu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-13thinkpad_acpi: buffer overflow in fan_get_status()Dan Carpenter
The acpi_evalf() function modifies four bytes of data but in fan_get_status() we pass a pointer to u8. I have modified the function to use type checking now. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13eeepc-laptop: fix device reference count leakage in eeepc_rfkill_hotplug()Jiang Liu
Fix a device reference count leakage issue in function eeepc_rfkill_hotplug(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13platform/x86: fix asus_laptop.wled_type descriptionMaxim Nikulin
MODULE_PARM_DESC for wlan_status is further in the same file Signed-off-by: Maxim A. Nikulin <M.A.Nikulin@gmail.com> Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13asus-laptop: HRWS/HWRS typoCorentin Chary
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=24222 Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13drivers-platform-x86: remove useless #ifdef CONFIG_ACPI_VIDEOCorentin Chary
Signed-off-by: Corentin Chary <corentin.chary@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13apple-gmux: Fix port address calculation in gmux_pio_write32()Seth Forshee
This function fails to add the start address of the gmux I/O range to the requested port address and thus writes to the wrong location. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13apple-gmux: Fix index read functionsBernhard Froemel
Study of Apple's binary driver revealed that the GMUX_READ_PORT should be written between calls to gmux_index_wait_ready and gmux_index_wait_complete (i.e., the new index protocol must be followed). If this is not done correctly, the indexed gmux device only partially accepts writes which lead to problems concerning GPU switching. Special thanks to Seth Forshee who helped greatly with identifying unnecessary changes. Signed-off-by: Bernhard Froemel <froemel@vmars.tuwien.ac.at> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13apple-gmux: Obtain version info from indexed gmuxBernhard Froemel
This patch extracts and displays version information from the indexed gmux device as it is also done for the classic gmux device. Signed-off-by: Bernhard Froemel <froemel@vmars.tuwien.ac.at> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-09-13bnx2x: Add missing afex codeYuval Mintz
Commit a334872224a67b614dc888460377862621f3dac7 added afex support but lacked several logical changes. This lack can cause afex to crash, and also have a slight effect on other flows (i.e., driver always assumes the Tx ring has less available buffers than what it actually has). This patch adds the missing segments, fixing said issues. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-13bnx2x: fix registers dumpedDmitry Kravkov
Under traffic, there are several registers that when read (e.g., via 'ethtool -d') may cause the chip to stall. This patch corrects the registers read in such flows. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-13bnx2x: correct advertisement of pause capabilitiesYaniv Rosner
This patch propagates users' requested flow-control into the link layer, which will later be used to advertise this flow-control for auto-negotiation (until now these values were ignored). Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-13bnx2x: display the correct duplex valueYaniv Rosner
Prior to this fix, the driver reported the chip's active duplex state is always 'full', even if using half-duplex mode. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-13bnx2x: prevent timeouts when using PFCYaniv Rosner
Prevent updating the xmac PFC configuration when using a link speed slower than 10G -the umac block is responsible for 1G or slower connections, therefore it is possible the xmac block is reset when connection is slower. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-13bnx2x: fix stats copying logicYuval Mintz
FW needs the driver statistics for management. Current logic is broken in that the function that gathers the port statistics does not copy its own statistics to a place where the FW can use it. This patch causes every function that can pass statistics to the FW to do so. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-13bnx2x: Avoid sending multiple statistics queriesDmitry Kravkov
During traffic when DCB is enabled, it is possible for multiple instances of statistics queries to be sent to the chip - this may cause the FW to assert. This patch prevents the sending of an additional instance of statistics query while the previous query hasn't completed. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-13drm/radeon: make 64bit fences more robust v3Christian König
Only increase the higher 32bits if we really detect a wrap around. v2: instead of increasing the higher 32bits just use the higher 32bits from the last emitted fence. v3: also use last emitted fence value as upper limit. The intention of this patch is to make fences as robust as they where before introducing 64bit fences. This is necessary because on older systems it looks like the fence value gets corrupted on initialization. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=51344 Should also fix: https://bugs.freedesktop.org/show_bug.cgi?id=54129 https://bugs.freedesktop.org/show_bug.cgi?id=54662 https://bugzilla.redhat.com/show_bug.cgi?id=846505 https://bugzilla.redhat.com/show_bug.cgi?id=845639 3.5 needs a separate patch due to changes in the fence code. Will send that out separately. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-09-13drm/radeon: rework pll selection (v3)Alex Deucher
For DP we can use the same PPLL for all active DP encoders. Take advantage of that to prevent cases where we may end up sharing a PPLL between DP and non-DP which won't work. Also clean up the code a bit. v2: - fix missing pll_id assignment in crtc init v3: - fix DP PPLL check - document functions - break in main encoder search loop after matching. no need to keep checking additional encoders. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=54471 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-13 17:30:36 +0000