summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-01-17usb: ftdi_sio: Crucible Technologies COMET Caller ID - pid addedTomasz Mloduchowski
commit 8cf65dc386f3634a43312f436cc7a935476a40c4 upstream. Simple fix to add support for Crucible Technologies COMET Caller ID USB decoder - a device containing FTDI USB/Serial converter chip, handling 1200bps CallerID messages decoded from the phone line - adding correct USB PID is sufficient. Tested to apply cleanly and work flawlessly against 3.6.9, 3.7.0-rc8 and 3.8.0-rc3 on both amd64 and x86 arches. Signed-off-by: Tomasz Mloduchowski <q@qdot.me> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: option: add Telekom Speedstick LTE IIBjørn Mork
commit 5ec0085440ef8c2cf50002b34d5a504ee12aa2bf upstream. also known as Alcatel One Touch L100V LTE The driver description files gives these names to the vendor specific functions on this modem: Application1: VID_1BBB&PID_011E&MI_00 Application2: VID_1BBB&PID_011E&MI_01 Modem: VID_1BBB&PID_011E&MI_03 Ethernet: VID_1BBB&PID_011E&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: option: Add new MEDIATEK PID supportQuentin.Li
commit 94a85b633829b946eef53fc1825d526312fb856f upstream. In option.c, add some new MEDIATEK PIDs support for MEDIATEK new products. This is a MEDIATEK inc. release patch. Signed-off-by: Quentin.Li <snowmanli88@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: option: blacklist network interface on ZTE MF880Bjørn Mork
commit fab38246f318edcd0dcb8fd3852a47cf8938878a upstream. The driver description files gives these names to the vendor specific functions on this modem: diag: VID_19D2&PID_0284&MI_00 nmea: VID_19D2&PID_0284&MI_01 at: VID_19D2&PID_0284&MI_02 mdm: VID_19D2&PID_0284&MI_03 net: VID_19D2&PID_0284&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17USB: option: add Nexpring NP10T terminal idDzianis Kahanovich
commit ad86e58661b38b279b7519d4e49c7a19dc1654bb upstream. Hyundai Petatel Inc. Nexpring NP10T terminal (EV-DO rev.A USB modem) ID Signed-off-by: Denis Kaganovich <mahatma@eu.by> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17b43: Fix firmware loading when driver is built into the kernelLarry Finger
commit 5e20a4b53094651d80f856ff55a916b999dbb57a upstream. Recent versions of udev cause synchronous firmware loading from the probe routine to fail because the request to user space would time out. The original fix for b43 (commit 6b6fa58) moved the firmware load from the probe routine to a work queue, but it still used synchronous firmware loading. This method is OK when b43 is built as a module; however, it fails when the driver is compiled into the kernel. This version changes the code to load the initial firmware file using request_firmware_nowait(). A completion event is used to hold the work queue until that file is available. This driver reads several firmware files - the remainder can be read synchronously. On some test systems, the async read fails; however, a following synch read works, thus the async failure falls through to the sync try. Reported-and-Tested by: Felix Janda <felix.janda@posteo.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mwifiex: check wait_event_interruptible return valueBing Zhao
commit 9c969d8ccb1e17bd20742f4ac9f00c1a64487234 upstream. wait_event_interruptible function returns -ERESTARTSYS if it's interrupted by a signal. Driver should check the return value and handle this case properly. In mwifiex_wait_queue_complete() routine, as we are now checking wait_event_interruptible return value, the condition check is not required. Also, we have removed mwifiex_cancel_pending_ioctl() call to avoid a chance of sending second command to FW by other path as soon as we clear current command node. FW can not handle two commands simultaneously. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17radeon/kms: force rn50 chip to always report connected on analog outputJerome Glisse
commit 51861d4eebc2ddc25c77084343d060fa79f6e291 upstream. Those rn50 chip are often connected to console remoting hw and load detection often fails with those. Just don't try to load detect and report connect. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: speakup: avoid out-of-range access in synth_add()Samuel Thibault
commit 6102c48bd421074a33e102f2ebda3724e8d275f9 upstream. Check that array index is in-bounds before accessing the synths[] array. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Nickolai Zeldovich <nickolai@csail.mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: speakup: avoid out-of-range access in synth_init()Nickolai Zeldovich
commit ae428655b826f2755a8101b27beda42a275ef8ad upstream. Check that array index is in-bounds before accessing the synths[] array. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: r8712u: Add new device IDLarry Finger
commit da849a92d3bafaf24d770e971c2c9e5c3f60b5d1 upstream. The ISY IWL 1000 USB WLAN stick with USB ID 050d:11f1 is a clone of the Belkin F7D1101 V1 device. Reported-by: Thomas Hartmann <hartmann@ict.tuwien.ac.at> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Thomas Hartmann <hartmann@ict.tuwien.ac.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: comedi: comedi_test: fix race when cancelling commandIan Abbott
commit c0729eeefdcd76db338f635162bf0739fd2c5f6f upstream. Éric Piel reported a kernel oops in the "comedi_test" module. It was a NULL pointer dereference within `waveform_ai_interrupt()` (actually a timer function) that sometimes occurred when a running asynchronous command is cancelled (either by the `COMEDI_CANCEL` ioctl or by closing the device file). This seems to be a race between the caller of `waveform_ai_cancel()` which on return from that function goes and tears down the running command, and the timer function which uses the command. In particular, `async->cmd.chanlist` gets freed (and the pointer set to NULL) by `do_become_nonbusy()` in "comedi_fops.c" but a previously scheduled `waveform_ai_interrupt()` timer function will dereference that pointer regardless, leading to the oops. Fix it by replacing the `del_timer()` call in `waveform_ai_cancel()` with `del_timer_sync()`. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reported-by: Éric Piel <piel@delmic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: comedi: fix minimum AO period for NI 625x and NI 628xÉric Piel
commit 34b55d8c48f4f76044d8f4d6ec3dc786cf210312 upstream. The minimum period was set to 357 ns, while the divider for these boards is 50 ns. This prevented to output at maximum speed as ni_ao_cmdtest() would return 357 but would not accept it. Not sure why it was set to 357 ns (this was done before the git history, which starts 5 years ago). My guess is that it comes from reading the specification stating a 2.8 MHz rate (~ 357 ns). The latest specification states a 2.86 MHz rate (~ 350 ns), which makes a lot more sense. Tested on a pci-6251. Signed-off-by: Éric Piel <piel@delmic.com> Acked-By: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: comedi: prevent auto-unconfig of manually configured devicesIan Abbott
commit 7d3135af399e92cf4c9bbc5f86b6c140aab3b88c upstream. When a low-level comedi driver auto-configures a device, a `struct comedi_dev_file_info` is allocated (as well as a `struct comedi_device`) by `comedi_alloc_board_minor()`. A pointer to the hardware `struct device` is stored as a cookie in the `struct comedi_dev_file_info`. When the low-level comedi driver auto-unconfigures the device, `comedi_auto_unconfig()` uses the cookie to find the `struct comedi_dev_file_info` so it can detach the comedi device from the driver, clean it up and free it. A problem arises if the user manually unconfigures and reconfigures the comedi device using the `COMEDI_DEVCONFIG` ioctl so that is no longer associated with the original hardware device. The problem is that the cookie is not cleared, so that a call to `comedi_auto_unconfig()` from the low-level driver will still find it, detach it, clean it up and free it. Stop this problem occurring by always clearing the `hardware_device` cookie in the `struct comedi_dev_file_info` whenever the `COMEDI_DEVCONFIG` ioctl call is successful. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17udldrmfb: udl_get_edid: drop unneeded i--Hans de Goede
commit 7b4cf994e4c6ba48872bb25253cc393b7fb74c82 upstream. This is a left-over from when udl_get_edid returned the amount of bytes successfully read, which it no longer does. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17udldrmfb: udl_get_edid: usb_control_msg buffer must not be on the stackHans de Goede
commit 242187b362555849e8c971dfbbfd55f8bd9fa717 upstream. The buffer passed to usb_control_msg may end up in scatter-gather list, and may thus not be on the stack. Having it on the stack usually works on x86, but not on other archs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17udldrmfb: Fix EDID not working with monitors with EDID extension blocksHans de Goede
commit c930812fe5ebe725760422c9c351d1f6fde1502d upstream. udldrmfb only reads the main EDID block, and if that advertises extensions the drm_edid code expects them to be present, and starts reading beyond the buffer udldrmfb passes it. Although it may be possible to read more EDID info with the udl we simpy don't know how, and even if trial and error gets it working on one device, that is no guarantee it will work on other revisions. So this patch does a simple fix in the form of patching the EDID info to report 0 extension blocks, this fixes udldrmfb only doing 1024x768 on monitors with EDID extension blocks. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17HID: add quirk for Freescale i.MX23 ROM recoveryMarek Vasut
commit 436136cec650d661eb662fcb508a99878606d050 upstream. The USB recovery mode present in i.MX23 ROM emulates USB HID. It needs this quirk to behave properly. Even if the official branding of the chip is Freescale i.MX23, I named it Sigmatel STMP3780 since that's what the chip really is and it even reports itself as STMP3780. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17regmap: debugfs: Avoid overflows for very small readsMark Brown
commit db04328c167ff8e7c57f4a3532214aeada3a82fd upstream. If count is less than the size of a register then we may hit integer wraparound when trying to move backwards to check if we're still in the buffer. Instead move the position forwards to check if it's still in the buffer, we are unlikely to be able to allocate a buffer sufficiently big to overflow here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17ACPI : do not use Lid and Sleep button for S5 wakeupZhang Rui
commit b7e383046c2c7c13ad928cd7407eafff758ddd4b upstream. When system enters power off, the _PSW of Lid device is enabled. But this may cause the system to reboot instead of power off. A proper way to fix this is to always disable lid wakeup capability for S5. References: https://bugzilla.kernel.org/show_bug.cgi?id=35262 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17aoe: do not call bdi_init after blk_alloc_queueEd Cashin
commit 0a41409c518083133e79015092585d68915865be upstream, but doesn't apply, so this version is different for older kernels than 3.7.x blk_alloc_queue has already done a bdi_init, so do not bdi_init again in aoeblk_gdalloc. The extra call causes list corruption in the per-CPU backing dev info stats lists. Affected users see console WARNINGs about list_del corruption on percpu_counter_destroy when doing "rmmod aoe" or "aoeflush -a" when AoE targets have been detected and initialized by the system. The patch below applies to v3.6.11, with its v47 aoe driver. It is expected to apply to all currently maintained stable kernels except 3.7.y. A related but different fix has been posted for 3.7.y. References: RedHat bugzilla ticket with original report https://bugzilla.redhat.com/show_bug.cgi?id=853064 LKML discussion of bug and fix http://thread.gmane.org/gmane.linux.kernel/1416336/focus=1416497 Reported-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17samsung-laptop: Add quirk for broken acpi_video backlight on N250PSeth Forshee
commit e04c200f1f2de8eaa2f5af6d97e7e213a1abb424 upstream. BugLink: http://bugs.launchpad.net/bugs/1086921 Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17video: mxsfb: fix crash when unblanking the displayLothar Waßmann
commit 6c1ecba8d84841277d68140ef485335d5be28485 upstream. The VDCTRL4 register does not provide the MXS SET/CLR/TOGGLE feature. The write in mxsfb_disable_controller() sets the data_cnt for the LCD DMA to 0 which obviously means the max. count for the LCD DMA and leads to overwriting arbitrary memory when the display is unblanked. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Acked-by: Juergen Beisert <jbe@pengutronix.de> Tested-by: Lauri Hintsala <lauri.hintsala@bluegiga.net> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17hwmon: (lm73} Detect and report i2c bus errorsChris Verges
commit 0602934f302e016e2ea5dc6951681bfac77455ef upstream. If an LM73 device does not exist on an I2C bus, attempts to communicate with the device result in an error code returned from the i2c read/write functions. The current lm73 driver casts that return value from a s32 type to a s16 type, then converts it to a temperature in celsius. Because negative temperatures are valid, it is difficult to distinguish between an error code printed to the response buffer and a negative temperature recorded by the sensor. The solution is to evaluate the return value from the i2c functions before performing any temperature calculations. If the i2c function did not succeed, the error code should be passed back through the virtual file system layer instead of being printed into the response buffer. Before: $ cat /sys/class/hwmon/hwmon0/device/temp1_input -46 After: $ cat /sys/class/hwmon/hwmon0/device/temp1_input cat: read error: No such device or address Signed-off-by: Chris Verges <kg4ysn@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: 64bit fixes: vCommandTimerWait change calculation of timer.Malcolm Priestley
commit 70e227790d4ee4590023d8041a3485f8053593fc upstream. The timer appears to run too fast/race on 64 bit systems. Using msecs_to_jiffies seems to cause a deadlock on 64 bit. A calculation of (MSecond * HZ) / 1000 appears to run satisfactory. Change BSSIDInfoCount to u32. After this patch the driver can be successfully connect on little endian 64/32 bit systems. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: 64bit fixes: key.c/h change unsigned long to u32Malcolm Priestley
commit c0d05b305b00c698b0a8c1b3d46c9380bce9db45 upstream. Fixes long issues. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: 64 bit fixes: fix long warning messages.Malcolm Priestley
commit b4dc03af5513774277c9c36b12a25cd3f25f4404 upstream. Fixes long warning messages from patch [PATCH 08/14] staging: vt6656: 64 bit fixes : correct all type sizes Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: 64 bit fixes : correct all type sizesMalcolm Priestley
commit 7730492855a2f9c828599bcd8d62760f96d319e4 upstream. After this patch all BYTE/WORD/DWORD types can be replaced with the appropriate u sizes. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: 64 bit fixes: use u32 for QWORD definition.Malcolm Priestley
commit a552397d5e4ef0cc0bd3e9595d6acc9a3b381171 upstream. Size of long issues replace with u32. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17staging: vt6656: [BUG] out of bound array reference in RFbSetPower.Malcolm Priestley
commit ab1dd9963137a1e122004d5378a581bf16ae9bc8 upstream. Calling RFbSetPower with uCH zero value will cause out of bound array reference. This causes 64 bit kernels to oops on boot. Note: Driver does not function on 64 bit kernels and should be blacklisted on them. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17dm ioctl: prevent unsafe change to dm_ioctl data_sizeAlasdair G Kergon
commit e910d7ebecd1aac43125944a8641b6cb1a0dfabe upstream. Abort dm ioctl processing if userspace changes the data_size parameter after we validated it but before we finished copying the data buffer from userspace. The dm ioctl parameters are processed in the following sequence: 1. ctl_ioctl() calls copy_params(); 2. copy_params() makes a first copy of the fixed-sized portion of the userspace parameters into the local variable "tmp"; 3. copy_params() then validates tmp.data_size and allocates a new structure big enough to hold the complete data and copies the whole userspace buffer there; 4. ctl_ioctl() reads userspace data the second time and copies the whole buffer into the pointer "param"; 5. ctl_ioctl() reads param->data_size without any validation and stores it in the variable "input_param_size"; 6. "input_param_size" is further used as the authoritative size of the kernel buffer. The problem is that userspace code could change the contents of user memory between steps 2 and 4. In particular, the data_size parameter can be changed to an invalid value after the kernel has validated it. This lets userspace force the kernel to access invalid kernel memory. The fix is to ensure that the size has not changed at step 4. This patch shouldn't have a security impact because CAP_SYS_ADMIN is required to run this code, but it should be fixed anyway. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17dm persistent data: rename node to btree_nodeMikulas Patocka
commit 550929faf89e2e2cdb3e9945ea87d383989274cf upstream. This patch fixes a compilation failure on sparc32 by renaming struct node. struct node is already defined in include/linux/node.h. On sparc32, it happens to be included through other dependencies and persistent-data doesn't compile because of conflicting declarations. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17RDMA/nes: Fix for terminate timer crashTatyana Nikolova
commit 7bfcfa51c35cdd2d37e0d70fc11790642dd11fb3 upstream. The terminate timer needs to be initialized just once. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17RDMA/nes: Fix for crash when registering zero length MR for CQTatyana Nikolova
commit 7d9c199a55200c9b9fcad08e150470d02fb385be upstream. Signed-off-by: Tatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/i915: make the panel fitter work on pipes B and C on IVBPaulo Zanoni
commit 13888d78c664a1f61d7b09d282f5916993827a40 upstream. I actually found this problem on Haswell, but then discovered Ivy Bridge also has it by reading the spec. I don't have the hardware to test this. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/radeon: Properly handle DDC probe for DP bridgesNiels Ole Salscheider
commit 0a9069d34918659bc8a89e21e69e60b2b83291a3 upstream. DDC information can be accessed using AUX CH Fixes failure to probe monitors on some systems with DP bridge chips. agd5f: minor fixes Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/radeon: add WAIT_UNTIL to evergreen VM safe reg listAlex Deucher
commit 668bbc81baf0f34df832d8aca5c7d5e19a493c68 upstream. It's used in a recent mesa commit: http://cgit.freedesktop.org/mesa/mesa/commit/?id=24b1206ab2dcd506aaac3ef656aebc8bc20cd27a and there may be some other cases in the future where it's required. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17drm/radeon: fix eDP clk and lane setup for scaled modesAlex Deucher
commit 93927f9c1db5f55085457e820f0631064c7bfa34 upstream. Need to use the adjusted mode since we are sending native timing and using the scaler for non-native modes. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17intel-iommu: Free old page tables before creating superpageWoodhouse, David
commit 6491d4d02893d9787ba67279595990217177b351 upstream. The dma_pte_free_pagetable() function will only free a page table page if it is asked to free the *entire* 2MiB range that it covers. So if a page table page was used for one or more small mappings, it's likely to end up still present in the page tables... but with no valid PTEs. This was fine when we'd only be repopulating it with 4KiB PTEs anyway but the same virtual address range can end up being reused for a *large-page* mapping. And in that case were were trying to insert the large page into the second-level page table, and getting a complaint from the sanity check in __domain_mapping() because there was already a corresponding entry. This was *relatively* harmless; it led to a memory leak of the old page table page, but no other ill-effects. Fix it by calling dma_pte_clear_range (hopefully redundant) and dma_pte_free_pagetable() before setting up the new large page. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Tested-by: Ravi Murty <Ravi.Murty@intel.com> Tested-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17i2400m: add Intel 6150 device IDsDan Williams
commit 999a7c5776a0ed2133645fa7e008bec05bda9254 upstream. Add device IDs for WiMAX function of Intel 6150 cards. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problemsWolfram Sang
commit 6f2a6a52560ad8d85710aabd92b7a3239b3a6b07 upstream. It could happen (1 out of 100 times) that NAND did not start up correctly after warm rebooting, so the kernel could not find the UBI or DMA timed out due to a stalled BCH. When resetting BCH together with GPMI, the issue could not be observed anymore (after 10000+ reboots). We probably need the consistent state already before sending any command to NAND, even when no ECC is needed. I chose to keep the extra reset for BCH when changing the flash layout to be on the safe side. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mtd cs553x_nand: Initialise ecc.strength before nand_scan()Nathan Williams
commit d1f3b65d2d6fdb4bf0edd4b67e86e191af48daee upstream. Loading cs553x_nand with Hynix H27U1G8F2BTR NAND flash causes this bug: kernel BUG at drivers/mtd/nand/nand_base.c:3345! invalid opcode: 0000 [#1] Modules linked in: cs553x_nand(+) vfat fat usb_storage ehci_hcd usbcore usb_comr Pid: 436, comm: modprobe Not tainted 3.6.7 #1 EIP: 0060:[<c118d205>] EFLAGS: 00010296 CPU: 0 EIP is at nand_scan_tail+0x64c/0x69c EAX: 00000034 EBX: cea6ed98 ECX: 00000000 EDX: 00000000 ESI: cea6ec00 EDI: cea6ec00 EBP: 20000000 ESP: cdd17e48 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 CR0: 8005003b CR2: 0804e119 CR3: 0d850000 CR4: 00000090 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process modprobe (pid: 436, ti=cdd16000 task=cdd1c320 task.ti=cdd16000) Stack: c12e962c c118f7ef 00000003 cea6ed98 d014b25c 20000000 fffff007 00000001 00000000 cdd53b00 d014b000 c1001021 cdd53b00 d01493c0 cdd53b00 cdd53b00 d01493c0 c1047f83 d014b4a0 00000000 cdd17f9c ce4be454 cdd17f48 cdd1c320 Call Trace: [<c118f7ef>] ? nand_scan+0x1b/0x4d [<d014b25c>] ? init_module+0x25c/0x2de [cs553x_nand] [<d014b000>] ? 0xd014afff [<c1001021>] ? do_one_initcall+0x21/0x111 [<c1047f83>] ? sys_init_module+0xe4/0x1261 [<c1031207>] ? task_work_run+0x36/0x43 [<c1265ced>] ? syscall_call+0x7/0xb Code: fa ff ff c7 86 d8 00 00 00 01 00 00 00 e9 5f fc ff ff 68 f8 26 2e c1 e8 a7 EIP: [<c118d205>] nand_scan_tail+0x64c/0x69c SS:ESP 0068:cdd17e48 Initialising ecc.strength before the call to nand_scan() fixes this. Signed-off-by: Nathan Williams <nathan@traverse.com.au> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mfd: Only unregister platform devices allocated by the mfd coreCharles Keepax
commit b9fbb62eb61452d728c39b2e5020739c575aac53 upstream. mfd_remove_devices would iterate over all devices sharing a parent with an mfd device regardless of whether they were allocated by the mfd core or not. This especially caused problems when the device structure was not contained within a platform_device, because to_platform_device is used on each device pointer. This patch defines a device_type for mfd devices and checks this is present from mfd_remove_devices_fn before processing the device. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Tested-by: Peter Tyser <ptyser@xes-inc.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17mfd: wm8994: Add support for WM1811 rev EMark Brown
commit fee546ce8cfd9dea1f53175f627e17ef5ff05df4 upstream. This is supported identically to the previous revisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17target/tcm_fc: fix the lockdep warning due to inconsistent lock stateYi Zou
commit 9f4ad44b264f8bb61ffdd607148215566568430d upstream. The lockdep warning below is in theory correct but it will be in really weird rare situation that ends up that deadlock since the tcm fc session is hashed based the rport id. Nonetheless, the complaining below is about rcu callback that does the transport_deregister_session() is happening in softirq, where transport_register_session() that happens earlier is not. This triggers the lockdep warning below. So, just fix this to make lockdep happy by disabling the soft irq before calling transport_register_session() in ft_prli. BTW, this was found in FCoE VN2VN over two VMs, couple of create and destroy would get this triggered. v1: was enforcing register to be in softirq context which was not righ. See, http://www.spinics.net/lists/target-devel/msg03614.html v2: following comments from Roland&Nick (thanks), it seems we don't have to do transport_deregister_session() in rcu callback, so move it into ft_sess_free() but still do kfree() of the corresponding ft_sess struct in rcu callback to make sure the ft_sess is not freed till the rcu callback. ... [ 1328.370592] scsi2 : FCoE Driver [ 1328.383429] fcoe: No FDMI support. [ 1328.384509] host2: libfc: Link up on port (000000) [ 1328.934229] host2: Assigned Port ID 00a292 [ 1357.232132] host2: rport 00a393: Remove port [ 1357.232568] host2: rport 00a393: Port sending LOGO from Ready state [ 1357.233692] host2: rport 00a393: Delete port [ 1357.234472] host2: rport 00a393: work event 3 [ 1357.234969] host2: rport 00a393: callback ev 3 [ 1357.235979] host2: rport 00a393: Received a LOGO response closed [ 1357.236706] host2: rport 00a393: work delete [ 1357.237481] [ 1357.237631] ================================= [ 1357.238064] [ INFO: inconsistent lock state ] [ 1357.238450] 3.7.0-rc7-yikvm+ #3 Tainted: G O [ 1357.238450] --------------------------------- [ 1357.238450] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 1357.238450] ksoftirqd/0/3 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 1357.238450] (&(&se_tpg->session_lock)->rlock){+.?...}, at: [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] {SOFTIRQ-ON-W} state was registered at: [ 1357.238450] [<ffffffff810834f5>] mark_held_locks+0x6d/0x95 [ 1357.238450] [<ffffffff8108364a>] trace_hardirqs_on_caller+0x12d/0x197 [ 1357.238450] [<ffffffff810836c1>] trace_hardirqs_on+0xd/0xf [ 1357.238450] [<ffffffff8149caba>] _raw_spin_unlock_irq+0x2d/0x45 [ 1357.238450] [<ffffffffa01e8d10>] __transport_register_session+0xb8/0x122 [target_core_mod] [ 1357.238450] [<ffffffffa01e8dbe>] transport_register_session+0x44/0x5a [target_core_mod] [ 1357.238450] [<ffffffffa018e32c>] ft_prli+0x1e3/0x275 [tcm_fc] [ 1357.238450] [<ffffffffa0160e8d>] fc_rport_recv_req+0x95e/0xdc5 [libfc] [ 1357.238450] [<ffffffffa015be88>] fc_lport_recv_els_req+0xc4/0xd5 [libfc] [ 1357.238450] [<ffffffffa015c778>] fc_lport_recv_req+0x12f/0x18f [libfc] [ 1357.238450] [<ffffffffa015a6d7>] fc_exch_recv+0x8ba/0x981 [libfc] [ 1357.238450] [<ffffffffa0176d7a>] fcoe_percpu_receive_thread+0x47a/0x4e2 [fcoe] [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] irq event stamp: 275411 [ 1357.238450] hardirqs last enabled at (275410): [<ffffffff810bb6a0>] rcu_process_callbacks+0x229/0x42a [ 1357.238450] hardirqs last disabled at (275411): [<ffffffff8149c2f7>] _raw_spin_lock_irqsave+0x22/0x8e [ 1357.238450] softirqs last enabled at (275394): [<ffffffff8103d669>] __do_softirq+0x246/0x26f [ 1357.238450] softirqs last disabled at (275399): [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [ 1357.238450] other info that might help us debug this: [ 1357.238450] Possible unsafe locking scenario: [ 1357.238450] [ 1357.238450] CPU0 [ 1357.238450] ---- [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] <Interrupt> [ 1357.238450] lock(&(&se_tpg->session_lock)->rlock); [ 1357.238450] [ 1357.238450] *** DEADLOCK *** [ 1357.238450] [ 1357.238450] no locks held by ksoftirqd/0/3. [ 1357.238450] [ 1357.238450] stack backtrace: [ 1357.238450] Pid: 3, comm: ksoftirqd/0 Tainted: G O 3.7.0-rc7-yikvm+ #3 [ 1357.238450] Call Trace: [ 1357.238450] [<ffffffff8149399a>] print_usage_bug+0x1f5/0x206 [ 1357.238450] [<ffffffff8100da59>] ? save_stack_trace+0x2c/0x49 [ 1357.238450] [<ffffffff81082aae>] ? print_irq_inversion_bug.part.14+0x1ae/0x1ae [ 1357.238450] [<ffffffff81083336>] mark_lock+0x106/0x258 [ 1357.238450] [<ffffffff81084e34>] __lock_acquire+0x2e7/0xe53 [ 1357.238450] [<ffffffff8102903d>] ? pvclock_clocksource_read+0x48/0xb4 [ 1357.238450] [<ffffffff810ba6a3>] ? rcu_process_gp_end+0xc0/0xc9 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff81085ef1>] lock_acquire+0x119/0x143 [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff8149c329>] _raw_spin_lock_irqsave+0x54/0x8e [ 1357.238450] [<ffffffffa01eacd4>] ? transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffffa01eacd4>] transport_deregister_session+0x41/0x148 [target_core_mod] [ 1357.238450] [<ffffffff810bb6a0>] ? rcu_process_callbacks+0x229/0x42a [ 1357.238450] [<ffffffffa018ddc5>] ft_sess_rcu_free+0x17/0x24 [tcm_fc] [ 1357.238450] [<ffffffffa018ddae>] ? ft_sess_free+0x1b/0x1b [tcm_fc] [ 1357.238450] [<ffffffff810bb6d7>] rcu_process_callbacks+0x260/0x42a [ 1357.238450] [<ffffffff8103d55d>] __do_softirq+0x13a/0x26f [ 1357.238450] [<ffffffff8149b34e>] ? __schedule+0x65f/0x68e [ 1357.238450] [<ffffffff8103d6bb>] run_ksoftirqd+0x29/0x62 [ 1357.238450] [<ffffffff8105c83c>] smpboot_thread_fn+0x1a5/0x1aa [ 1357.238450] [<ffffffff8105c697>] ? smpboot_unregister_percpu_thread+0x47/0x47 [ 1357.238450] [<ffffffff810549f1>] kthread+0xb1/0xb9 [ 1357.238450] [<ffffffff8149b49d>] ? wait_for_common+0xbb/0x10a [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1357.238450] [<ffffffff814a40ec>] ret_from_fork+0x7c/0xb0 [ 1357.238450] [<ffffffff81054940>] ? __init_kthread_worker+0x59/0x59 [ 1417.440099] rport-2:0-0: blocked FC remote port time out: removing rport Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Open-FCoE <devel@open-fcoe.org> Cc: Nicholas A. Bellinger <nab@risingtidesystems.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17libata: fix Null pointer dereference on disk errorXiaotian Feng
commit 26cd4d65deba587f3cf2329b6869ce02bcbe68ec upstream. Following oops were observed when disk error happened: [ 4272.896937] sd 0:0:0:0: [sda] Unhandled error code [ 4272.896939] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 4272.896942] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 5a de a7 00 00 08 00 [ 4272.896951] end_request: I/O error, dev sda, sector 5955239 [ 4291.574947] BUG: unable to handle kernel NULL pointer dereference at (null) [ 4291.658305] IP: [] ahci_activity_show+0x1/0x40 [ 4291.730090] PGD 76dbbc067 PUD 6c4fba067 PMD 0 [ 4291.783408] Oops: 0000 [#1] SMP [ 4291.822100] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/sw_activity [ 4291.934235] CPU 9 [ 4291.958301] Pid: 27942, comm: hwinfo ...... ata_scsi_find_dev could return NULL, so ata_scsi_activity_{show,store} should check if atadev is NULL. Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17libata: set dma_mode to 0xff in resetAaron Lu
commit 5416912af75de9cba5d1c75b99a7888b0bbbd2fb upstream. ata_device->dma_mode's initial value is zero, which is not a valid dma mode, but ata_dma_enabled will return true for this value. This patch sets dma_mode to 0xff in reset function, so that ata_dma_enabled will not return true for this case, or it will cause problem for pata_acpi. The corrsponding bugzilla page is at: https://bugzilla.kernel.org/show_bug.cgi?id=49151 Reported-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Tested-by: Szymon Janc <szymon@janc.net.pl> Tested-by: Dutra Julio <dutra.julio@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17sata_promise: fix hardreset lockdep errorMikael Pettersson
commit 3100d49d3cd236443faae9d81137c81b22d36003 upstream. sata_promise's pdc_hard_reset_port() needs to serialize because it flips a port-specific bit in controller register that's shared by all ports. The code takes the ata host lock for this, but that's broken because an interrupt may arrive on our irq during the hard reset sequence, and that too will take the ata host lock. With lockdep enabled a big nasty warning is seen. Fixed by adding private state to the ata host structure, containing a second lock used only for serializing the hard reset sequences. This eliminated the lockdep warnings both on my test rig and on the original reporter's machine. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Adko Branil <adkobranil@yahoo.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17iscsit: use GFP_ATOMIC under spin lockWei Yongjun
commit 3c989d7603872bf878840f7ce3ea49b73bea4c6c upstream. The function iscsit_build_conn_drop_async_message() is called from iscsit_close_connection() with spin lock 'sess->conn_lock' held, so we should use GFP_ATOMIC instead of GFP_KERNEL. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17SCSI: qla2xxx: Test and clear FCPORT_UPDATE_NEEDED atomically.David Jeffery
commit a394aac88506159e047630fc90dc2242568382d8 upstream. When the qla2xxx driver loses access to multiple, remote ports, there is a race condition which can occur which will keep the request stuck on a scsi request queue indefinitely. This bad state occurred do to a race condition with how the FCPORT_UPDATE_NEEDED bit is set in qla2x00_schedule_rport_del(), and how it is cleared in qla2x00_do_dpc(). The problem port has its drport pointer set, but it has never been processed by the driver to inform the fc transport that the port has been lost. qla2x00_schedule_rport_del() sets drport, and then sets the FCPORT_UPDATE_NEEDED bit. In qla2x00_do_dpc(), the port lists are walked and any drport pointer is handled and the fc transport informed of the port loss, then the FCPORT_UPDATE_NEEDED bit is cleared. This leaves a race where the dpc thread is processing one port removal, another port removal is marked with a call to qla2x00_schedule_rport_del(), and the dpc thread clears the bit for both removals, even though only the first removal was actually handled. Until another event occurs to set FCPORT_UPDATE_NEEDED, the later port removal is never finished and qla2xxx stays in a bad state which causes requests to become stuck on request queues. This patch updates the driver to test and clear FCPORT_UPDATE_NEEDED atomically. This ensures the port state changes are processed and not lost. Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-04 10:51:20 +0000