summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-02-08net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHYArınç ÜNAL
commit 4223f86512877b04c932e7203648b37eec931731 upstream. Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to properly control MT7530 and MT7531 switch PHYs. A noticeable change is that the behaviour of switchport interfaces going up-down-up-down is no longer there. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08EDAC/xgene: Fix deferred probingSergey Shtylyov
commit dfd0dfb9a7cc04acf93435b440dd34c2ca7b4424 upstream. The driver overrides error codes returned by platform_get_irq_optional() to -EINVAL for some strange reason, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the proper error codes to platform driver code upwards. [ bp: Massage commit message. ] Fixes: 0d4429301c4a ("EDAC: Add APM X-Gene SoC EDAC driver") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220124185503.6720-3-s.shtylyov@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08EDAC/altera: Fix deferred probingSergey Shtylyov
commit 279eb8575fdaa92c314a54c0d583c65e26229107 upstream. The driver overrides the error codes returned by platform_get_irq() to -ENODEV for some strange reason, so if it returns -EPROBE_DEFER, the driver will fail the probe permanently instead of the deferred probing. Switch to propagating the proper error codes to platform driver code upwards. [ bp: Massage commit message. ] Fixes: 71bcada88b0f ("edac: altera: Add Altera SDRAM EDAC support") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220124185503.6720-2-s.shtylyov@omp.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08fbcon: Add option to enable legacy hardware accelerationHelge Deller
commit a3f781a9d6114c1d1e01defb7aa234dec45d2a5f upstream. Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to enable bitblt and fillrect hardware acceleration in the framebuffer console. If disabled, such acceleration will not be used, even if it is supported by the graphics hardware driver. If you plan to use DRM as your main graphics output system, you should disable this option since it will prevent compiling in code which isn't used later on when DRM takes over. For all other configurations, e.g. if none of your graphic cards support DRM (yet), DRM isn't available for your architecture, or you can't be sure that the graphic card in the target system will support DRM, you most likely want to enable this option. In the non-accelerated case (e.g. when DRM is used), the inlined fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the compiler is able to optimize much unneccesary code away. In this v3 patch version I additionally changed the GETVYRES() and GETVXRES() macros to take a pointer to the fbcon_display struct. This fixes the build when console rotation is enabled and helps the compiler again to optimize out code. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-4-deller@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08Revert "fbcon: Disable accelerated scrolling"Helge Deller
commit 87ab9f6b7417349aa197a6c7098d4fdd4beebb74 upstream. This reverts commit 39aead8373b3c20bb5965c024dfb51a94e526151. Revert the first (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220202135531.92183-3-deller@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08rtc: cmos: Evaluate century appropriateRiwen Lu
commit ff164ae39b82ee483b24579c8e22a13a8ce5bd04 upstream. There's limiting the year to 2069. When setting the rtc year to 2070, reading it returns 1970. Evaluate century starting from 19 to count the correct year. $ sudo date -s 20700106 Mon 06 Jan 2070 12:00:00 AM CST $ sudo hwclock -w $ sudo hwclock -r 1970-01-06 12:00:49.604968+08:00 Fixes: 2a4daadd4d3e5071 ("rtc: cmos: ignore bogus century byte") Signed-off-by: Riwen Lu <luriwen@kylinos.cn> Acked-by: Eric Wong <e@80x24.org> Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220106084609.1223688-1-luriwen@kylinos.cn Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> # preparation for stable Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08gve: fix the wrong AdminQ buffer queue index checkHaiyue Wang
commit 1f84a9450d75e08af70d9e2f2d5e1c0ac0c881d2 upstream. The 'tail' and 'head' are 'unsigned int' type free-running count, when 'head' is overflow, the 'int i (= tail) < u32 head' will be false: Only '- loop 0: idx = 63' result is shown, so it needs to use 'int' type to compare, it can handle the overflow correctly. typedef uint32_t u32; int main() { u32 tail, head; int stail, shead; int i, loop; tail = 0xffffffff; head = 0x00000000; for (i = tail, loop = 0; i < head; i++) { unsigned int idx = i & 63; printf("+ loop %d: idx = %u\n", loop++, idx); } stail = tail; shead = head; for (i = stail, loop = 0; i < shead; i++) { unsigned int idx = i & 63; printf("- loop %d: idx = %u\n", loop++, idx); } return 0; } Fixes: 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.") Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08scsi: bnx2fc: Make bnx2fc_recv_frame() mp safeJohn Meneghini
commit 936bd03405fc83ba039d42bc93ffd4b88418f1d3 upstream. Running tests with a debug kernel shows that bnx2fc_recv_frame() is modifying the per_cpu lport stats counters in a non-mpsafe way. Just boot a debug kernel and run the bnx2fc driver with the hardware enabled. [ 1391.699147] BUG: using smp_processor_id() in preemptible [00000000] code: bnx2fc_ [ 1391.699160] caller is bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699174] CPU: 2 PID: 4355 Comm: bnx2fc_l2_threa Kdump: loaded Tainted: G B [ 1391.699180] Hardware name: HP ProLiant DL120 G7, BIOS J01 07/01/2013 [ 1391.699183] Call Trace: [ 1391.699188] dump_stack_lvl+0x57/0x7d [ 1391.699198] check_preemption_disabled+0xc8/0xd0 [ 1391.699205] bnx2fc_recv_frame+0xbf9/0x1760 [bnx2fc] [ 1391.699215] ? do_raw_spin_trylock+0xb5/0x180 [ 1391.699221] ? bnx2fc_npiv_create_vports.isra.0+0x4e0/0x4e0 [bnx2fc] [ 1391.699229] ? bnx2fc_l2_rcv_thread+0xb7/0x3a0 [bnx2fc] [ 1391.699240] bnx2fc_l2_rcv_thread+0x1af/0x3a0 [bnx2fc] [ 1391.699250] ? bnx2fc_ulp_init+0xc0/0xc0 [bnx2fc] [ 1391.699258] kthread+0x364/0x420 [ 1391.699263] ? _raw_spin_unlock_irq+0x24/0x50 [ 1391.699268] ? set_kthread_struct+0x100/0x100 [ 1391.699273] ret_from_fork+0x22/0x30 Restore the old get_cpu/put_cpu code with some modifications to reduce the size of the critical section. Link: https://lore.kernel.org/r/20220124145110.442335-1-jmeneghi@redhat.com Fixes: d576a5e80cd0 ("bnx2fc: Improve stats update mechanism") Tested-by: Guangwu Zhang <guazhang@redhat.com> Acked-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08pinctrl: bcm2835: Fix a few error pathsFlorian Fainelli
commit 5297c693d8c8e08fa742e3112cf70723f7a04da2 upstream. After commit 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") a few error paths would not unwind properly the registration of gpio ranges. Correct that by assigning a single error label and goto it whenever we encounter a fatal error. Fixes: 266423e60ea1 ("pinctrl: bcm2835: Change init order for gpio hogs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220127215033.267227-1-f.fainelli@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08pinctrl: intel: fix unexpected interruptŁukasz Bartosik
commit e986f0e602f19ecb7880b04dd1db415ed9bca3f6 upstream. ASUS Chromebook C223 with Celeron N3350 crashes sometimes during cold booot. Inspection of the kernel log showed that it gets into an inifite loop logging the following message: ->handle_irq(): 000000009cdb51e8, handle_bad_irq+0x0/0x251 ->irq_data.chip(): 000000005ec212a7, 0xffffa043009d8e7 ->action(): 00000 IRQ_NOPROBE set unexpected IRQ trap at vector 7c The issue happens during cold boot but only if cold boot happens at most several dozen seconds after Chromebook is powered off. For longer intervals between power off and power on (cold boot) the issue does not reproduce. The unexpected interrupt is sourced from INT3452 GPIO pin which is used for SD card detect. Investigation relevealed that when the interval between power off and power on (cold boot) is less than several dozen seconds then values of INT3452 GPIO interrupt enable and interrupt pending registers survive power off and power on sequence and interrupt for SD card detect pin is enabled and pending during probe of SD controller which causes the unexpected IRQ message. "Intel Pentium and Celeron Processor N- and J- Series" volume 3 doc mentions that GPIO interrupt enable and status registers default value is 0x0. The fix clears INT3452 GPIO interrupt enabled and interrupt pending registers in its probe function. Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support") Signed-off-by: Łukasz Bartosik <lb@semihalf.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured lineAndy Shevchenko
commit e12963c453263d5321a2c610e98cbc731233b685 upstream. The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") hadn't taken into account an update of the IRQ flags scenario. When updating the IRQ flags on the preconfigured line the ->irq_set_type() is called again. In such case the sequential Rx buffer configuration changes may trigger a falling or rising edge interrupt that may lead, on some platforms, to an undesired event. This may happen because each of intel_gpio_set_gpio_mode() and __intel_gpio_set_direction() updates the pad configuration with a different value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is called only for the pads that are configured as an input. Due to this fact, integrate the logic of __intel_gpio_set_direction() call into the intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and immediately re-enabled. Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") Reported-by: Kane Chen <kane.chen@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Grace Kao <grace.kao@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/i915/overlay: Prevent divide by zero bugs in scalingDan Carpenter
commit 90a3d22ff02b196d5884e111f39271a1d4ee8e3e upstream. Smatch detected a divide by zero bug in check_overlay_scaling(). drivers/gpu/drm/i915/display/intel_overlay.c:976 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_height'. drivers/gpu/drm/i915/display/intel_overlay.c:980 check_overlay_scaling() error: potential divide by zero bug '/ rec->dst_width'. Prevent this by ensuring that the dst height and width are non-zero. Fixes: 02e792fbaadb ("drm/i915: implement drmmode overlay support v4") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220124122409.GA31673@kili (cherry picked from commit cf5b64f7f10b28bebb9b7c9d25e7aee5cbe43918) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: stmmac: ensure PTP time register reads are consistentYannick Vignon
commit 80d4609008e6d696a279e39ae7458c916fcd44c1 upstream. Even if protected from preemption and interrupts, a small time window remains when the 2 register reads could return inconsistent values, each time the "seconds" register changes. This could lead to an about 1-second error in the reported time. Add logic to ensure the "seconds" and "nanoseconds" values are consistent. Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: stmmac: dump gmac4 DMA registers correctlyCamel Guo
commit 7af037c39b600bac2c716dd1228e8ddbe149573f upstream. Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump gmac4 DMA registers correctly, this commit checks if a net_device has gmac4 and uses different logic to dump its DMA registers. This fixes the following KASAN warning, which can normally be triggered by a command similar like "ethtool -d eth0": BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30 Write of size 4 at addr ffffffc010177100 by task ethtool/1839 kasan_report+0x200/0x21c __asan_report_store4_noabort+0x34/0x60 dwmac4_dump_dma_regs+0x6d4/0xb30 stmmac_ethtool_gregs+0x110/0x204 ethtool_get_regs+0x200/0x4b0 dev_ethtool+0x1dac/0x3800 dev_ioctl+0x7c0/0xb50 sock_ioctl+0x298/0x6c4 ... Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods") Signed-off-by: Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: macsec: Verify that send_sci is on when setting Tx sci explicitlyLior Nahmanson
commit d0cfa548dbde354de986911d3913897b5448faad upstream. When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: macsec: Fix offload support for NETDEV_UNREGISTER eventLior Nahmanson
commit 9cef24c8b76c1f6effe499d2f131807c90f7ce9a upstream. Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: ieee802154: ca8210: Stop leaking skb'sMiquel Raynal
commit 621b24b09eb61c63f262da0c9c5f0e93348897e5 upstream. Upon error the ieee802154_xmit_complete() helper is not called. Only ieee802154_wake_queue() is called manually. We then leak the skb structure. Free the skb structure upon error before returning. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-5-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: ieee802154: mcr20a: Fix lifs/sifs periodsMiquel Raynal
commit d753c4004820a888ec007dd88b271fa9c3172c5c upstream. These periods are expressed in time units (microseconds) while 40 and 12 are the number of symbol durations these periods will last. We need to multiply them both with phy->symbol_duration in order to get these values in microseconds. Fixes: 8c6ad9cc5157 ("ieee802154: Add NXP MCR20A IEEE 802.15.4 transceiver driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-3-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08net: ieee802154: hwsim: Ensure proper channel selection at probe timeMiquel Raynal
commit 1293fccc9e892712d910ec96079d3717307f1d2d upstream. Drivers are expected to set the PHY current_channel and current_page according to their default state. The hwsim driver is advertising being configured on channel 13 by default but that is not reflected in its own internal pib structure. In order to ensure that this driver consider the current channel as being 13 internally, we at least need to set the pib->channel field to 13. Fixes: f25da51fdc38 ("ieee802154: hwsim: add replacement for fakelb") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [stefan@datenfreihafen.org: fixed assigment from page to channel] Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20220125121426.848337-2-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: uniphier: fix reference count leak in uniphier_spi_probe()Xin Xiong
commit 37c2c83ca4f1ef4b6908181ac98e18360af89b42 upstream. The issue happens in several error paths in uniphier_spi_probe(). When either dma_get_slave_caps() or devm_spi_register_master() returns an error code, the function forgets to decrease the refcount of both `dma_rx` and `dma_tx` objects, which may lead to refcount leaks. Fix it by decrementing the reference count of specific objects in those error paths. Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Fixes: 28d1dddc59f6 ("spi: uniphier: Add DMA transfer mode support") Link: https://lore.kernel.org/r/20220125101214.35677-1-xiongx18@fudan.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: meson-spicc: add IRQ check in meson_spicc_probeMiaoqian Lin
commit e937440f7fc444a3e3f1fb75ea65292d6f433a44 upstream. This check misses checking for platform_get_irq()'s call and may passes the negative error codes to devm_request_irq(), which takes unsigned IRQ #, causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_irq() with invalid IRQ #s. Fixes: 454fa271bc4e ("spi: Add Meson SPICC driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220126110447.24549-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: mediatek: Avoid NULL pointer crash in interruptBenjamin Gaignard
commit f83a96e5f033fbbd21764705cb9c04234b96218e upstream. In some case, like after a transfer timeout, master->cur_msg pointer is NULL which led to a kernel crash when trying to use master->cur_msg->spi. mtk_spi_can_dma(), pointed by master->can_dma, doesn't use this parameter avoid the problem by setting NULL as second parameter. Fixes: a568231f46322 ("spi: mediatek: Add spi bus for Mediatek MT8173") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Link: https://lore.kernel.org/r/20220131141708.888710-1-benjamin.gaignard@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08spi: bcm-qspi: check for valid cs before applying chip selectKamal Dasu
commit 2cbd27267ffe020af1442b95ec57f59a157ba85c upstream. Apply only valid chip select value. This change fixes case where chip select is set to initial value of '-1' during probe and PM supend and subsequent resume can try to use the value with undefined behaviour. Also in case where gpio based chip select, the check in bcm_qspi_chip_select() shall prevent undefined behaviour on resume. Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220127185359.27322-1-kdasu.kdev@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08iommu/amd: Fix loop timeout issue in iommu_ga_log_enable()Joerg Roedel
commit 9b45a7738eec52bf0f5d8d3d54e822962781c5f2 upstream. The polling loop for the register change in iommu_ga_log_enable() needs to have a udelay() in it. Otherwise the CPU might be faster than the IOMMU hardware and wrongly trigger the WARN_ON() further down the code stream. Use a 10us for udelay(), has there is some hardware where activation of the GA log can take more than a 100ms. A future optimization should move the activation check of the GA log to the point where it gets used for the first time. But that is a bigger change and not suitable for a fix. Fixes: 8bda0cfbdc1a ("iommu/amd: Detect and initialize guest vAPIC log") Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20220204115537.3894-1-joro@8bytes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08iommu/vt-d: Fix potential memory leak in intel_setup_irq_remapping()Guoqing Jiang
commit 99e675d473eb8cf2deac1376a0f840222fc1adcf upstream. After commit e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated"). For tear down scenario, fn is only freed after fail to allocate ir_domain, though it also should be freed in case dmar_enable_qi returns error. Besides free fn, irq_domain and ir_msi_domain need to be removed as well if intel_setup_irq_remapping fails to enable queued invalidation. Improve the rewinding path by add out_free_ir_domain and out_free_fwnode lables per Baolu's suggestion. Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated") Suggested-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Link: https://lore.kernel.org/r/20220119063640.16864-1-guoqing.jiang@linux.dev Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220128031002.2219155-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08RDMA/mlx4: Don't continue event handler after memory allocation failureLeon Romanovsky
commit f3136c4ce7acf64bee43135971ca52a880572e32 upstream. The failure to allocate memory during MLX4_DEV_EVENT_PORT_MGMT_CHANGE event handler will cause skip the assignment logic, but ib_dispatch_event() will be called anyway. Fix it by calling to return instead of break after memory allocation failure. Fixes: 00f5ce99dc6e ("mlx4: Use port management change event instead of smp_snoop") Link: https://lore.kernel.org/r/12a0e83f18cfad4b5f62654f141e240d04915e10.1643622264.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08RDMA/siw: Fix broken RDMA Read Fence/Resume logic.Bernard Metzler
commit b43a76f423aa304037603fd6165c4a534d2c09a7 upstream. Code unconditionally resumed fenced SQ processing after next RDMA Read completion, even if other RDMA Read responses are still outstanding, or ORQ is full. Also adds comments for better readability of fence processing, and removes orq_get_tail() helper, which is not needed anymore. Fixes: 8b6a361b8c48 ("rdma/siw: receive path") Fixes: a531975279f3 ("rdma/siw: main include file") Link: https://lore.kernel.org/r/20220130170815.1940-1-bmt@zurich.ibm.com Reported-by: Jared Holzman <jared.holzman@excelero.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08IB/rdmavt: Validate remote_addr during loopback atomic testsMike Marciniszyn
commit 4028bccb003cf67e46632dee7f97ddc5d7b6e685 upstream. The rdma-core test suite sends an unaligned remote address and expects a failure. ERROR: test_atomic_non_aligned_addr (tests.test_atomic.AtomicTest) The qib/hfi1 rc handling validates properly, but the test has the client and server on the same system. The loopback of these operations is a distinct code path. Fix by syntaxing the proposed remote address in the loopback code path. Fixes: 15703461533a ("IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavt") Link: https://lore.kernel.org/r/1642584489-141005-1-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08RDMA/ucma: Protect mc during concurrent multicast leavesLeon Romanovsky
commit 36e8169ec973359f671f9ec7213547059cae972e upstream. Partially revert the commit mentioned in the Fixes line to make sure that allocation and erasing multicast struct are locked. BUG: KASAN: use-after-free in ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] BUG: KASAN: use-after-free in ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 Read of size 8 at addr ffff88801bb74b00 by task syz-executor.1/25529 CPU: 0 PID: 25529 Comm: syz-executor.1 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x320 mm/kasan/report.c:247 __kasan_report mm/kasan/report.c:433 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:450 ucma_cleanup_multicast drivers/infiniband/core/ucma.c:491 [inline] ucma_destroy_private_ctx+0x914/0xb70 drivers/infiniband/core/ucma.c:579 ucma_destroy_id+0x1e6/0x280 drivers/infiniband/core/ucma.c:614 ucma_write+0x25c/0x350 drivers/infiniband/core/ucma.c:1732 vfs_write+0x28e/0xae0 fs/read_write.c:588 ksys_write+0x1ee/0x250 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Currently the xarray search can touch a concurrently freeing mc as the xa_for_each() is not surrounded by any lock. Rather than hold the lock for a full scan hold it only for the effected items, which is usually an empty list. Fixes: 95fe51096b7a ("RDMA/ucma: Remove mc_list and rely on xarray") Link: https://lore.kernel.org/r/1cda5fabb1081e8d16e39a48d3a4f8160cea88b8.1642491047.git.leonro@nvidia.com Reported-by: syzbot+e3f96c43d19782dd14a7@syzkaller.appspotmail.com Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08RDMA/cma: Use correct address when leaving multicast groupMaor Gottlieb
commit d9e410ebbed9d091b97bdf45b8a3792e2878dc48 upstream. In RoCE we should use cma_iboe_set_mgid() and not cma_set_mgid to generate the mgid, otherwise we will generate an IGMP for an incorrect address. Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join") Link: https://lore.kernel.org/r/913bc6783fd7a95fe71ad9454e01653ee6fb4a9a.1642491047.git.leonro@nvidia.com Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08Revert "ASoC: mediatek: Check for error clk pointer"Guenter Roeck
This reverts commit d491a2c2cf96f9f3d855cf0bcd807d48ccb98e81 which is commit 9de2b9286a6dd16966959b3cb34fc2ddfd39213e upstream With this patch in the tree, Chromebooks running the affected hardware no longer boot. Bisect points to this patch, and reverting it fixes the problem. An analysis of the code with this patch applied shows: ret = init_clks(pdev, clk); if (ret) return ERR_PTR(ret); ... for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) { struct clk *c = clk[data->clk_id[j]]; if (IS_ERR(c)) { dev_err(&pdev->dev, "%s: clk unavailable\n", data->name); return ERR_CAST(c); } scpd->clk[j] = c; } Not all clocks in the clk_names array have to be present. Only the clocks in the data->clk_id array are actually needed. The code already checks if the required clocks are available and bails out if not. The assumption that all clocks have to be present is wrong, and commit 9de2b9286a6d needs to be reverted. Fixes: 9de2b9286a6d ("ASoC: mediatek: Check for error clk pointer") Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn> Cc: Mark Brown <broonie@kernel.org> Cc: James Liao <jamesjj.liao@mediatek.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Matthias Brugger <matthias.bgg@gmail.com Cc: Frank Wunderlich <frank-w@public-files.de> Cc: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/lkml/20220205014755.699603-1-linux@roeck-us.net/ Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08IB/hfi1: Fix AIP early init panicMike Marciniszyn
commit 5f8f55b92edd621f056bdf09e572092849fabd83 upstream. An early failure in hfi1_ipoib_setup_rn() can lead to the following panic: BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0 PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI Workqueue: events work_for_cpu_fn RIP: 0010:try_to_grab_pending+0x2b/0x140 Code: 1f 44 00 00 41 55 41 54 55 48 89 d5 53 48 89 fb 9c 58 0f 1f 44 00 00 48 89 c2 fa 66 0f 1f 44 00 00 48 89 55 00 40 84 f6 75 77 <f0> 48 0f ba 2b 00 72 09 31 c0 5b 5d 41 5c 41 5d c3 48 89 df e8 6c RSP: 0018:ffffb6b3cf7cfa48 EFLAGS: 00010046 RAX: 0000000000000246 RBX: 00000000000001b0 RCX: 0000000000000000 RDX: 0000000000000246 RSI: 0000000000000000 RDI: 00000000000001b0 RBP: ffffb6b3cf7cfa70 R08: 0000000000000f09 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffb6b3cf7cfa90 R14: ffffffff9b2fbfc0 R15: ffff8a4fdf244690 FS: 0000000000000000(0000) GS:ffff8a527f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000001b0 CR3: 00000017e2410003 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: __cancel_work_timer+0x42/0x190 ? dev_printk_emit+0x4e/0x70 iowait_cancel_work+0x15/0x30 [hfi1] hfi1_ipoib_txreq_deinit+0x5a/0x220 [hfi1] ? dev_err+0x6c/0x90 hfi1_ipoib_netdev_dtor+0x15/0x30 [hfi1] hfi1_ipoib_setup_rn+0x10e/0x150 [hfi1] rdma_init_netdev+0x5a/0x80 [ib_core] ? hfi1_ipoib_free_rdma_netdev+0x20/0x20 [hfi1] ipoib_intf_init+0x6c/0x350 [ib_ipoib] ipoib_intf_alloc+0x5c/0xc0 [ib_ipoib] ipoib_add_one+0xbe/0x300 [ib_ipoib] add_client_context+0x12c/0x1a0 [ib_core] enable_device_and_get+0xdc/0x1d0 [ib_core] ib_register_device+0x572/0x6b0 [ib_core] rvt_register_device+0x11b/0x220 [rdmavt] hfi1_register_ib_device+0x6b4/0x770 [hfi1] do_init_one.isra.20+0x3e3/0x680 [hfi1] local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The panic happens in hfi1_ipoib_txreq_deinit() because there is a NULL deref when hfi1_ipoib_netdev_dtor() is called in this error case. hfi1_ipoib_txreq_init() and hfi1_ipoib_rxq_init() are self unwinding so fix by adjusting the error paths accordingly. Other changes: - hfi1_ipoib_free_rdma_netdev() is deleted including the free_netdev() since the netdev core code deletes calls free_netdev() - The switch to the accelerated entrances is moved to the success path. Cc: stable@vger.kernel.org Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets") Link: https://lore.kernel.org/r/1642287756-182313-4-git-send-email-mike.marciniszyn@cornelisnetworks.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08dma-buf: heaps: Fix potential spectre v1 gadgetJordy Zomer
commit 92c4cfaee6872038563c5b6f2e8e613f9d84d47d upstream. It appears like nr could be a Spectre v1 gadget as it's supplied by a user and used as an array index. Prevent the contents of kernel memory from being leaked to userspace via speculative execution by using array_index_nospec. Signed-off-by: Jordy Zomer <jordy@pwning.systems> Fixes: c02a81fba74f ("dma-buf: Add dma-buf heaps framework") Cc: <stable@vger.kernel.org> # v5.6+ Acked-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [sumits: added fixes and cc: stable tags] Link: https://patchwork.freedesktop.org/patch/msgid/20220129150604.3461652-1-jordy@pwning.systems Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts()Uday Shankar
commit 6a51abdeb259a56d95f13cc67e3a0838bcda0377 upstream. Controller deletion/reset, immediately followed by or concurrent with a reconnect, is hard failing the connect attempt resulting in a complete loss of connectivity to the controller. In the connect request, fabrics looks for an existing controller with the same address components and aborts the connect if a controller already exists and the duplicate connect option isn't set. The match routine filters out controllers that are dead or dying, so they don't interfere with the new connect request. When NVME_CTRL_DELETING_NOIO was added, it missed updating the state filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this new state, it's seen as a live controller and fails the connect request. Correct by adding the DELETING_NIO state to the match checks. Fixes: ecca390e8056 ("nvme: fix deadlock in disconnect during scan_work and/or ana_work") Cc: <stable@vger.kernel.org> # v5.7+ Signed-off-by: Uday Shankar <ushankar@purestorage.com> Reviewed-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/amd/display: Force link_rate as LINK_RATE_RBR2 for 2018 15" Apple Retina ↵Aun-Ali Zaidi
panels commit 30fbce374745a9c6af93c775a5ac49a97f822fda upstream. The eDP link rate reported by the DP_MAX_LINK_RATE dpcd register (0xa) is contradictory to the highest rate supported reported by EDID (0xc = LINK_RATE_RBR2). The effects of this compounded with commit '4a8ca46bae8a ("drm/amd/display: Default max bpc to 16 for eDP")' results in no display modes being found and a dark panel. For now, simply force the maximum supported link rate for the eDP attached 2018 15" Apple Retina panels. Additionally, we must also check the firmware revision since the device ID reported by the DPCD is identical to that of the more capable 16,1, incorrectly quirking it. We also use said firmware check to quirk the refreshed 15,1 models with Vega graphics as they use a slightly newer firmware version. Tested-by: Aun-Ali Zaidi <admin@kodeit.net> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net> Signed-off-by: Aditya Garg <gargaditya08@live.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08drm/nouveau: fix off by one in BIOS boundary checkingNick Lopez
commit 1b777d4d9e383d2744fc9b3a09af6ec1893c8b1a upstream. Bounds checking when parsing init scripts embedded in the BIOS reject access to the last byte. This causes driver initialization to fail on Apple eMac's with GeForce 2 MX GPUs, leaving the system with no working console. This is probably only seen on OpenFirmware machines like PowerPC Macs because the BIOS image provided by OF is only the used parts of the ROM, not a power-of-two blocks read from PCI directly so PCs always have empty bytes at the end that are never accessed. Signed-off-by: Nick Lopez <github@glowingmonkey.org> Fixes: 4d4e9907ff572 ("drm/nouveau/bios: guard against out-of-bounds accesses to image") Cc: <stable@vger.kernel.org> # v4.10+ Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Karol Herbst <kherbst@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220122081906.2633061-1-github@glowingmonkey.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05Revert "drm/vc4: hdmi: Make sure the device is powered with CEC" againGreg Kroah-Hartman
This reverts commit 55b10b88ac8654fc2f31518aa349a2e643b37f18 which is commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. It wasn't applied correctly, something went wrong with an attempt to fix it up again, so just revert the whole thing to be back at a clean state. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220205171238.GA3073350@roeck-us.net Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/Yf5lNIJnvhP4ajam@kroah.com Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05Revert "drm/vc4: hdmi: Make sure the device is powered with CEC"Greg Kroah-Hartman
This reverts commit ac4ba79bb02881ed714adaa89faee601a18bff6d which is commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. It wasn't applied correctly, something went wrong with an attempt to fix it up again, so just revert the whole thing to be back at a clean state. Reported-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220205171238.GA3073350@roeck-us.net Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/Yf5lNIJnvhP4ajam@kroah.com Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: amd-xgbe: Fix skb data length underflowShyam Sundar S K
commit 5aac9108a180fc06e28d4e7fb00247ce603b72ee upstream. There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware") Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: amd-xgbe: ensure to reset the tx_timer_active flagRaju Rangoju
commit 7674b7b559b683478c3832527c59bceb169e701d upstream. Ensure to reset the tx_timer_active flag in xgbe_stop(), otherwise a port restart may result in tx timeout due to uncleared flag. Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05ipheth: fix EOVERFLOW in ipheth_rcvbulk_callbackGeorgi Valkov
commit 63e4b45c82ed1bde979da7052229a4229ce9cabf upstream. When rx_buf is allocated we need to account for IPHETH_IP_ALIGN, which reduces the usable size by 2 bytes. Otherwise we have 1512 bytes usable instead of 1514, and if we receive more than 1512 bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW, after which the driver malfunctiones and all communication stops. Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75 Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14") Signed-off-by: Georgi Valkov <gvalkov@abv.bg> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/ Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5: E-Switch, Fix uninitialized variable modactMaor Dickman
commit d8e5883d694bb053b19c4142a2d1f43a34f6fe2c upstream. The variable modact is not initialized before used in command modify header allocation which can cause command to fail. Fix by initializing modact with zeros. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5: Use del_timer_sync in fw reset flow of halting pollMaher Sanalla
commit 3c5193a87b0fea090aa3f769d020337662d87b5e upstream. Substitute del_timer() with del_timer_sync() in fw reset polling deactivation flow, in order to prevent a race condition which occurs when del_timer() is called and timer is deactivated while another process is handling the timer interrupt. A situation that led to the following call trace: RIP: 0010:run_timer_softirq+0x137/0x420 <IRQ> recalibrate_cpu_khz+0x10/0x10 ktime_get+0x3e/0xa0 ? sched_clock_cpu+0xb/0xc0 __do_softirq+0xf5/0x2ea irq_exit_rcu+0xc1/0xf0 sysvec_apic_timer_interrupt+0x9e/0xc0 asm_sysvec_apic_timer_interrupt+0x12/0x20 </IRQ> Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net/mlx5e: Fix handling of wrong devices during bond neteventMaor Dickman
commit ec41332e02bd0acf1f24206867bb6a02f5877a62 upstream. Current implementation of bond netevent handler only check if the handled netdev is VF representor and it missing a check if the VF representor is on the same phys device of the bond handling the netevent. Fix by adding the missing check and optimizing the check if the netdev is VF representor so it will not access uninitialized private data and crashes. BUG: kernel NULL pointer dereference, address: 000000000000036c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Workqueue: eth3bond0 bond_mii_monitor [bonding] RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core] RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000 RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880 RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008 R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10 R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core] mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core] mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core] raw_notifier_call_chain+0x41/0x60 call_netdevice_notifiers_info+0x34/0x80 netdev_lower_state_changed+0x4e/0xa0 bond_mii_monitor+0x56b/0x640 [bonding] process_one_work+0x1b9/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05drm/vc4: hdmi: Make sure the device is powered with CECMaxime Ripard
Commit 20b0dfa86bef0e80b41b0e5ac38b92f23b6f27f9 upstream. The original commit depended on a rework commit (724fc856c09e ("drm/vc4: hdmi: Split the CEC disable / enable functions in two")) that (rightfully) didn't reach stable. However, probably because the context changed, when the patch was applied to stable the pm_runtime_put called got moved to the end of the vc4_hdmi_cec_adap_enable function (that would have become vc4_hdmi_cec_disable with the rework) to vc4_hdmi_cec_init. This means that at probe time, we now drop our reference to the clocks and power domains and thus end up with a CPU hang when the CPU tries to access registers. The call to pm_runtime_resume_and_get() is also problematic since the .adap_enable CEC hook is called both to enable and to disable the controller. That means that we'll now call pm_runtime_resume_and_get() at disable time as well, messing with the reference counting. The behaviour we should have though would be to have pm_runtime_resume_and_get() called when the CEC controller is enabled, and pm_runtime_put when it's disabled. We need to move things around a bit to behave that way, but it aligns stable with upstream. Cc: <stable@vger.kernel.org> # 5.10.x Cc: <stable@vger.kernel.org> # 5.15.x Cc: <stable@vger.kernel.org> # 5.16.x Reported-by: Michael Stapelberg <michael+drm@stapelberg.ch> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05Revert "drivers: bus: simple-pm-bus: Add support for probing simple bus only ↵Kevin Hilman
devices" This reverts commit d5f13bbb51046537b2c2b9868177fb8fe8a6a6e9 which is commit 98e96cf80045a383fcc47c58dd4e87b3ae587b3e upstream. This change related to fw_devlink was backported to v5.10 but has severaly other dependencies that were not backported. As discussed with the original author, the best approach for v5.10 is to revert. Link: https://lore.kernel.org/linux-omap/7hk0efmfzo.fsf@baylibre.com Acked-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: ipa: prevent concurrent replenishAlex Elder
commit 998c0bd2b3715244da7639cc4e6a2062cb79c3f4 upstream. We have seen cases where an endpoint RX completion interrupt arrives while replenishing for the endpoint is underway. This causes another instance of replenishing to begin as part of completing the receive transaction. If this occurs it can lead to transaction corruption. Use a new flag to ensure only one replenish instance for an endpoint executes at a time. Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: ipa: use a bitmap for endpoint replenish_enabledAlex Elder
commit c1aaa01dbf4cef95af3e04a5a43986c290e06ea3 upstream. Define a new replenish_flags bitmap to contain Boolean flags associated with an endpoint's replenishing state. Replace the replenish_enabled field with a flag in that bitmap. This is to prepare for the next patch, which adds another flag. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05net: ipa: fix atomic update in ipa_endpoint_replenish()Alex Elder
commit 6c0e3b5ce94947b311348c367db9e11dcb2ccc93 upstream. In ipa_endpoint_replenish(), if an error occurs when attempting to replenish a receive buffer, we just quit and try again later. In that case we increment the backlog count to reflect that the attempt was unsuccessful. Then, if the add_one flag was true we increment the backlog again. This second increment is not included in the backlog local variable though, and its value determines whether delayed work should be scheduled. This is a bug. Fix this by determining whether 1 or 2 should be added to the backlog before adding it in a atomic_add_return() call. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05PCI: pciehp: Fix infinite loop in IRQ handler upon power faultLukas Wunner
commit 23584c1ed3e15a6f4bfab8dc5a88d94ab929ee12 upstream. The Power Fault Detected bit in the Slot Status register differs from all other hotplug events in that it is sticky: It can only be cleared after turning off slot power. Per PCIe r5.0, sec. 6.7.1.8: If a power controller detects a main power fault on the hot-plug slot, it must automatically set its internal main power fault latch [...]. The main power fault latch is cleared when software turns off power to the hot-plug slot. The stickiness used to cause interrupt storms and infinite loops which were fixed in 2009 by commits 5651c48cfafe ("PCI pciehp: fix power fault interrupt storm problem") and 99f0169c17f3 ("PCI: pciehp: enable software notification on empty slots"). Unfortunately in 2020 the infinite loop issue was inadvertently reintroduced by commit 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race"): The hardirq handler pciehp_isr() clears the PFD bit until pciehp's power_fault_detected flag is set. That happens in the IRQ thread pciehp_ist(), which never learns of the event because the hardirq handler is stuck in an infinite loop. Fix by setting the power_fault_detected flag already in the hardirq handler. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989 Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8PR11MB5702.namprd11.prod.outlook.com Fixes: 8edf5332c393 ("PCI: pciehp: Fix MSI interrupt race") Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.1637187226.git.lukas@wunner.de Reported-by: Joseph Bao <joseph.bao@intel.com> Tested-by: Joseph Bao <joseph.bao@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v4.19+ Cc: Stuart Hayes <stuart.w.hayes@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-14 07:34:48 +0000