| Age | Commit message (Collapse) | Author |
|---|
|
During log replay, at add_link(), we may increment the link count of
another inode that has a reference that conflicts with a new reference
for the inode currently being processed.
During log replay, at add_link(), we may drop (unlink) a reference from
some inode in the subvolume tree if that reference conflicts with a new
reference found in the log for the inode we are currently processing.
After the unlink, If the link count has decreased from 1 to 0, then we
increment the link count to prevent the inode from being deleted if it's
evicted by an iput() call, because we may have references to add to that
inode later on (and we will fixup its link count later during log replay).
However incrementing the link count from 0 to 1 triggers a warning:
$ cat fs/inode.c
(...)
void inc_nlink(struct inode *inode)
{
if (unlikely(inode->i_nlink == 0)) {
WARN_ON(!(inode->i_state & I_LINKABLE));
atomic_long_dec(&inode->i_sb->s_remove_count);
}
(...)
The I_LINKABLE flag is only set when creating an O_TMPFILE file, so it's
never set during log replay.
Most of the time, the warning isn't triggered even if we dropped the last
reference of the conflicting inode, and this is because:
1) The conflicting inode was previously marked for fixup, through a call
to link_to_fixup_dir(), which increments the inode's link count;
2) And the last iput() on the inode has not triggered eviction of the
inode, nor was eviction triggered after the iput(). So at add_link(),
even if we unlink the last reference of the inode, its link count ends
up being 1 and not 0.
So this means that if eviction is triggered after link_to_fixup_dir() is
called, at add_link() we will read the inode back from the subvolume tree
and have it with a correct link count, matching the number of references
it has on the subvolume tree. So if when we are at add_link() the inode
has exactly one reference only, its link count is 1, and after the unlink
its link count becomes 0.
So fix this by using set_nlink() instead of inc_nlink(), as the former
accepts a transition from 0 to 1 and it's what we use in other similar
contexts (like at link_to_fixup_dir().
Also make add_inode_ref() use set_nlink() instead of inc_nlink() to
bump the link count from 0 to 1.
The warning is actually harmless, but it may scare users. Josef also ran
into it recently.
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During log replay, when processing inode references, if we get an error
when looking up for an extended reference at __add_inode_ref(), we ignore
it and proceed, returning success (0) if no other error happens after the
lookup. This is obviously wrong because in case an extended reference
exists and it encodes some name not in the log, we need to unlink it,
otherwise the filesystem state will not match the state it had after the
last fsync.
So just make __add_inode_ref() return an error it gets from the extended
reference lookup.
Fixes: f186373fef005c ("btrfs: extended inode refs")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging a new name, in case of a rename, we pin the log before
changing it. We then either delete a directory entry from the log or
insert a key range item to mark the old name for deletion on log replay.
However when doing one of those log changes we may have another task that
started writing out the log (at btrfs_sync_log()) and it started before
we pinned the log root. So we may end up changing a log tree while its
writeback is being started by another task syncing the log. This can lead
to inconsistencies in a log tree and other unexpected results during log
replay, because we can get some committed node pointing to a node/leaf
that ends up not getting written to disk before the next log commit.
The problem, conceptually, started to happen in commit 88d2beec7e53fc
("btrfs: avoid logging all directory changes during renames"), because
there we started to update the log without joining its current transaction
first.
However the problem only became visible with commit 259c4b96d78dda
("btrfs: stop doing unnecessary log updates during a rename"), and that is
because we used to pin the log at btrfs_rename() and then before entering
btrfs_log_new_name(), when unlinking the old dentry, we ended up at
btrfs_del_inode_ref_in_log() and btrfs_del_dir_entries_in_log(). Both
of them join the current log transaction, effectively waiting for any log
transaction writeout (due to acquiring the root's log_mutex). This made it
safe even after leaving the current log transaction, because we remained
with the log pinned when we called btrfs_log_new_name().
Then in commit 259c4b96d78dda ("btrfs: stop doing unnecessary log updates
during a rename"), we removed the log pinning from btrfs_rename() and
stopped calling btrfs_del_inode_ref_in_log() and
btrfs_del_dir_entries_in_log() during the rename, and started to do all
the needed work at btrfs_log_new_name(), but without joining the current
log transaction, only pinning the log, which is racy because another task
may have started writeout of the log tree right before we pinned the log.
Both commits landed in kernel 5.18, so it doesn't make any practical
difference which should be blamed, but I'm blaming the second commit only
because with the first one, by chance, the problem did not happen due to
the fact we joined the log transaction after pinning the log and unpinned
it only after calling btrfs_log_new_name().
So make btrfs_log_new_name() join the current log transaction instead of
pinning it, so that we never do log updates if it's writeout is starting.
Fixes: 259c4b96d78dda ("btrfs: stop doing unnecessary log updates during a rename")
CC: stable@vger.kernel.org # 5.18+
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Tested-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently we will return 1 or -EAGAIN if we decide we need to commit
the transaction rather than sync the log. In practice this doesn't
really matter, we interpret any !0 and !BTRFS_NO_LOG_SYNC as needing to
commit the transaction. However this makes it hard to figure out what
the correct thing to do is.
Fix this up by defining BTRFS_LOG_FORCE_COMMIT and using this in all the
places where we want to force the transaction to be committed.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Codespell has found a few typos.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
iput() already handles NULL and non-NULL parameter, so it is not needed
to check that. This unifies all iput calls.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_read_buffer() is useless, it just calls
btree_read_extent_buffer_pages() with exactly the same arguments.
So remove it and rename btree_read_extent_buffer_pages() to
btrfs_read_extent_buffer(), which is a shorter name, has the "btrfs_"
prefix (since it's used outside disk-io.c) and the name is clear enough
about what it does.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When inserting a key range item (BTRFS_DIR_LOG_INDEX_KEY) while logging
a directory, we don't expect the insertion to fail with -EEXIST, because
we are holding the directory's log_mutex and we have dropped all existing
BTRFS_DIR_LOG_INDEX_KEY keys from the log tree before we started to log
the directory. However it's possible that during the logging we attempt
to insert the same BTRFS_DIR_LOG_INDEX_KEY key twice, but for this to
happen we need to race with insertions of items from other inodes in the
subvolume's tree while we are logging a directory. Here's how this can
happen:
1) We are logging a directory with inode number 1000 that has its items
spread across 3 leaves in the subvolume's tree:
leaf A - has index keys from the range 2 to 20 for example. The last
item in the leaf corresponds to a dir item for index number 20. All
these dir items were created in a past transaction.
leaf B - has index keys from the range 22 to 100 for example. It has
no keys from other inodes, all its keys are dir index keys for our
directory inode number 1000. Its first key is for the dir item with
a sequence number of 22. All these dir items were also created in a
past transaction.
leaf C - has index keys for our directory for the range 101 to 120 for
example. This leaf also has items from other inodes, and its first
item corresponds to the dir item for index number 101 for our directory
with inode number 1000;
2) When we finish processing the items from leaf A at log_dir_items(),
we log a BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and a last
offset of 21, meaning the log is authoritative for the index range
from 21 to 21 (a single sequence number). At this point leaf B was
not yet modified in the current transaction;
3) When we return from log_dir_items() we have released our read lock on
leaf B, and have set *last_offset_ret to 21 (index number of the first
item on leaf B minus 1);
4) Some other task inserts an item for other inode (inode number 1001 for
example) into leaf C. That resulted in pushing some items from leaf C
into leaf B, in order to make room for the new item, so now leaf B
has dir index keys for the sequence number range from 22 to 102 and
leaf C has the dir items for the sequence number range 103 to 120;
5) At log_directory_changes() we call log_dir_items() again, passing it
a 'min_offset' / 'min_key' value of 22 (*last_offset_ret from step 3
plus 1, so 21 + 1). Then btrfs_search_forward() leaves us at slot 0
of leaf B, since leaf B was modified in the current transaction.
We have also initialized 'last_old_dentry_offset' to 20 after calling
btrfs_previous_item() at log_dir_items(), as it left us at the last
item of leaf A, which refers to the dir item with sequence number 20;
6) We then call process_dir_items_leaf() to process the dir items of
leaf B, and when we process the first item, corresponding to slot 0,
sequence number 22, we notice the dir item was created in a past
transaction and its sequence number is greater than the value of
*last_old_dentry_offset + 1 (20 + 1), so we decide to log again a
BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and an end range
of 21 (key.offset - 1 == 22 - 1 == 21), which results in an -EEXIST
error from insert_dir_log_key(), as we have already inserted that
key at step 2, triggering the assertion at process_dir_items_leaf().
The trace produced in dmesg is like the following:
assertion failed: ret != -EEXIST, in fs/btrfs/tree-log.c:3857
[198255.980839][ T7460] ------------[ cut here ]------------
[198255.981666][ T7460] kernel BUG at fs/btrfs/ctree.h:3617!
[198255.983141][ T7460] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[198255.984080][ T7460] CPU: 0 PID: 7460 Comm: repro-ghost-dir Not tainted 5.18.0-5314c78ac373-misc-next+
[198255.986027][ T7460] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[198255.988600][ T7460] RIP: 0010:assertfail.constprop.0+0x1c/0x1e
[198255.989465][ T7460] Code: 8b 4c 89 (...)
[198255.992599][ T7460] RSP: 0018:ffffc90007387188 EFLAGS: 00010282
[198255.993414][ T7460] RAX: 000000000000003d RBX: 0000000000000065 RCX: 0000000000000000
[198255.996056][ T7460] RDX: 0000000000000001 RSI: ffffffff8b62b180 RDI: fffff52000e70e24
[198255.997668][ T7460] RBP: ffffc90007387188 R08: 000000000000003d R09: ffff8881f0e16507
[198255.999199][ T7460] R10: ffffed103e1c2ca0 R11: 0000000000000001 R12: 00000000ffffffef
[198256.000683][ T7460] R13: ffff88813befc630 R14: ffff888116c16e70 R15: ffffc90007387358
[198256.007082][ T7460] FS: 00007fc7f7c24640(0000) GS:ffff8881f0c00000(0000) knlGS:0000000000000000
[198256.009939][ T7460] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[198256.014133][ T7460] CR2: 0000560bb16d0b78 CR3: 0000000140b34005 CR4: 0000000000170ef0
[198256.015239][ T7460] Call Trace:
[198256.015674][ T7460] <TASK>
[198256.016313][ T7460] log_dir_items.cold+0x16/0x2c
[198256.018858][ T7460] ? replay_one_extent+0xbf0/0xbf0
[198256.025932][ T7460] ? release_extent_buffer+0x1d2/0x270
[198256.029658][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.031114][ T7460] ? lock_acquired+0xbe/0x660
[198256.032633][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.034386][ T7460] ? lock_release+0xcf/0x8a0
[198256.036152][ T7460] log_directory_changes+0xf9/0x170
[198256.036993][ T7460] ? log_dir_items+0xba0/0xba0
[198256.037661][ T7460] ? do_raw_write_unlock+0x7d/0xe0
[198256.038680][ T7460] btrfs_log_inode+0x233b/0x26d0
[198256.041294][ T7460] ? log_directory_changes+0x170/0x170
[198256.042864][ T7460] ? btrfs_attach_transaction_barrier+0x60/0x60
[198256.045130][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.046568][ T7460] ? lock_release+0xcf/0x8a0
[198256.047504][ T7460] ? lock_downgrade+0x420/0x420
[198256.048712][ T7460] ? ilookup5_nowait+0x81/0xa0
[198256.049747][ T7460] ? lock_downgrade+0x420/0x420
[198256.050652][ T7460] ? do_raw_spin_unlock+0xa9/0x100
[198256.051618][ T7460] ? __might_resched+0x128/0x1c0
[198256.052511][ T7460] ? __might_sleep+0x66/0xc0
[198256.053442][ T7460] ? __kasan_check_read+0x11/0x20
[198256.054251][ T7460] ? iget5_locked+0xbd/0x150
[198256.054986][ T7460] ? run_delayed_iput_locked+0x110/0x110
[198256.055929][ T7460] ? btrfs_iget+0xc7/0x150
[198256.056630][ T7460] ? btrfs_orphan_cleanup+0x4a0/0x4a0
[198256.057502][ T7460] ? free_extent_buffer+0x13/0x20
[198256.058322][ T7460] btrfs_log_inode+0x2654/0x26d0
[198256.059137][ T7460] ? log_directory_changes+0x170/0x170
[198256.060020][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.060930][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.061905][ T7460] ? lock_contended+0x770/0x770
[198256.062682][ T7460] ? btrfs_log_inode_parent+0xd04/0x1750
[198256.063582][ T7460] ? lock_downgrade+0x420/0x420
[198256.064432][ T7460] ? preempt_count_sub+0x18/0xc0
[198256.065550][ T7460] ? __mutex_lock+0x580/0xdc0
[198256.066654][ T7460] ? stack_trace_save+0x94/0xc0
[198256.068008][ T7460] ? __kasan_check_write+0x14/0x20
[198256.072149][ T7460] ? __mutex_unlock_slowpath+0x12a/0x430
[198256.073145][ T7460] ? mutex_lock_io_nested+0xcd0/0xcd0
[198256.074341][ T7460] ? wait_for_completion_io_timeout+0x20/0x20
[198256.075345][ T7460] ? lock_downgrade+0x420/0x420
[198256.076142][ T7460] ? lock_contended+0x770/0x770
[198256.076939][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0
[198256.078401][ T7460] ? btrfs_sync_file+0x5e6/0xa40
[198256.080598][ T7460] btrfs_log_inode_parent+0x523/0x1750
[198256.081991][ T7460] ? wait_current_trans+0xc8/0x240
[198256.083320][ T7460] ? lock_downgrade+0x420/0x420
[198256.085450][ T7460] ? btrfs_end_log_trans+0x70/0x70
[198256.086362][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.087544][ T7460] ? lock_release+0xcf/0x8a0
[198256.088305][ T7460] ? lock_downgrade+0x420/0x420
[198256.090375][ T7460] ? dget_parent+0x8e/0x300
[198256.093538][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0
[198256.094918][ T7460] ? lock_downgrade+0x420/0x420
[198256.097815][ T7460] ? do_raw_spin_unlock+0xa9/0x100
[198256.101822][ T7460] ? dget_parent+0xb7/0x300
[198256.103345][ T7460] btrfs_log_dentry_safe+0x48/0x60
[198256.105052][ T7460] btrfs_sync_file+0x629/0xa40
[198256.106829][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120
[198256.109655][ T7460] ? __fget_files+0x161/0x230
[198256.110760][ T7460] vfs_fsync_range+0x6d/0x110
[198256.111923][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120
[198256.113556][ T7460] __x64_sys_fsync+0x45/0x70
[198256.114323][ T7460] do_syscall_64+0x5c/0xc0
[198256.115084][ T7460] ? syscall_exit_to_user_mode+0x3b/0x50
[198256.116030][ T7460] ? do_syscall_64+0x69/0xc0
[198256.116768][ T7460] ? do_syscall_64+0x69/0xc0
[198256.117555][ T7460] ? do_syscall_64+0x69/0xc0
[198256.118324][ T7460] ? sysvec_call_function_single+0x57/0xc0
[198256.119308][ T7460] ? asm_sysvec_call_function_single+0xa/0x20
[198256.120363][ T7460] entry_SYSCALL_64_after_hwframe+0x44/0xae
[198256.121334][ T7460] RIP: 0033:0x7fc7fe97b6ab
[198256.122067][ T7460] Code: 0f 05 48 (...)
[198256.125198][ T7460] RSP: 002b:00007fc7f7c23950 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[198256.126568][ T7460] RAX: ffffffffffffffda RBX: 00007fc7f7c239f0 RCX: 00007fc7fe97b6ab
[198256.127942][ T7460] RDX: 0000000000000002 RSI: 000056167536bcf0 RDI: 0000000000000004
[198256.129302][ T7460] RBP: 0000000000000004 R08: 0000000000000000 R09: 000000007ffffeb8
[198256.130670][ T7460] R10: 00000000000001ff R11: 0000000000000293 R12: 0000000000000001
[198256.132046][ T7460] R13: 0000561674ca8140 R14: 00007fc7f7c239d0 R15: 000056167536dab8
[198256.133403][ T7460] </TASK>
Fix this by treating -EEXIST as expected at insert_dir_log_key() and have
it update the item with an end offset corresponding to the maximum between
the previously logged end offset and the new requested end offset. The end
offsets may be different due to dir index key deletions that happened as
part of unlink operations while we are logging a directory (triggered when
fsyncing some other inode parented by the directory) or during renames
which always attempt to log a single dir index deletion.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/YmyefE9mc2xl5ZMz@hungrycats.org/
Fixes: 732d591a5d6c12 ("btrfs: stop copying old dir items when logging a directory")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On Linux, empty symlinks are invalid, and attempting to create one with
the system call symlink(2) results in an -ENOENT error and this is
explicitly documented in the man page.
If we rename a symlink that was created in the current transaction and its
parent directory was logged before, we actually end up logging the symlink
without logging its content, which is stored in an inline extent. That
means that after a power failure we can end up with an empty symlink,
having no content and an i_size of 0 bytes.
It can be easily reproduced like this:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/testdir
$ sync
# Create a file inside the directory and fsync the directory.
$ touch /mnt/testdir/foo
$ xfs_io -c "fsync" /mnt/testdir
# Create a symlink inside the directory and then rename the symlink.
$ ln -s /mnt/testdir/foo /mnt/testdir/bar
$ mv /mnt/testdir/bar /mnt/testdir/baz
# Now fsync again the directory, this persist the log tree.
$ xfs_io -c "fsync" /mnt/testdir
<power failure>
$ mount /dev/sdc /mnt
$ stat -c %s /mnt/testdir/baz
0
$ readlink /mnt/testdir/baz
$
Fix this by always logging symlinks in full mode (LOG_INODE_ALL), so that
their content is also logged.
A test case for fstests will follow.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On a zoned filesystem, if we fail to allocate the root node for the log
root tree while syncing the log, we end up returning without finishing
the IO plug we started before, resulting in leaking resources as we
have started writeback for extent buffers of a log tree before. That
allocation failure, which typically is either -ENOMEM or -ENOSPC, is not
fatal and the fsync can safely fallback to a full transaction commit.
So release the IO plug if we fail to allocate the extent buffer for the
root of the log root tree when syncing the log on a zoned filesystem.
Fixes: 3ddebf27fcd3a9 ("btrfs: zoned: reorder log node allocation on zoned filesystem")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During log replay there is this pattern of running delayed items after
every inode unlink. To avoid repeating this several times, move the
logic into an helper function and use it instead of calling
btrfs_unlink_inode() followed by btrfs_run_delayed_items().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When an inode has a last_reflink_trans matching the current transaction,
we have to take special care when logging its checksums in order to
avoid getting checksum items with overlapping ranges in a log tree,
which could result in missing checksums after log replay (more on that
in the changelogs of commit 40e046acbd2f36 ("Btrfs: fix missing data
checksums after replaying a log tree") and commit e289f03ea79bbc ("btrfs:
fix corrupt log due to concurrent fsync of inodes with shared extents")).
We also need to make sure a full fsync will copy all old file extent
items it finds in modified leaves, because they might have been copied
from some other inode.
However once we fsync an inode, we don't need to keep paying the price of
that extra special care in future fsyncs done in the same transaction,
unless the inode is used for another reflink operation or the full sync
flag is set on it (truncate, failure to allocate extent maps for holes,
and other exceptional and infrequent cases).
So after we fsync an inode reset its last_unlink_trans to zero. In case
another reflink happens, we continue to update the last_reflink_trans of
the inode, just as before. Also set last_reflink_trans to the generation
of the last transaction that modified the inode whenever we need to set
the full sync flag on the inode, just like when we need to load an inode
from disk after eviction.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Doing a full fsync may require processing many leaves of metadata, which
can take some time and result in a task monopolizing a cpu for too long.
So add a cond_resched() after processing a leaf when doing a full fsync,
while not holding any locks on any tree (a subvolume or a log tree).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When doing a full fsync, at copy_items(), we iterate over all extents and
then collect their checksums into a list. After copying all the extents to
the log tree, we then log all the previously collected checksums.
Before the previous patch in the series (subject "btrfs: stop copying old
file extents when doing a full fsync"), we had to do it this way, because
while we were iterating over the items in the leaf of the subvolume tree,
we were holding a write lock on a leaf of the log tree, so logging the
checksums for an extent right after we collected them could result in a
deadlock, in case the checksum items ended up in the same leaf.
However after the previous patch in the series we now do a first iteration
over all the items in the leaf of the subvolume tree before locking a path
in the log tree, so we can now log the checksums right after we have
obtained them. This avoids holding in memory all checksums for all extents
in the leaf while copying items from the source leaf to the log tree. The
amount of memory used to hold all checksums of the extents in a leaf can
be significant. For example if a leaf has 200 file extent items referring
to 1M extents, using the default crc32c checksums, would result in using
over 200K of memory (not accounting for the extra overhead of struct
btrfs_ordered_sum), with smaller or less extents it would be less, but
it could be much more with more extents per leaf and/or much larger
extents.
So change copy_items() to log the checksums for an extent after looking
them up, and then free their memory, as they are no longer necessary.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging an inode in full sync mode, we go over every leaf that was
modified in the current transaction and has items associated to our inode,
and then copy all those items into the log tree. This includes copying
file extent items that were created and added to the inode in past
transactions, which is useless and only makes use more leaf space in the
log tree.
It's common to have a file with many file extent items spanning many
leaves where only a few file extent items are new and need to be logged,
and in such case we log all the file extent items we find in the modified
leaves.
So change the full sync behaviour to skip over file extent items that are
not needed. Those are the ones that match the following criteria:
1) Have a generation older than the current transaction and the inode
was not a target of a reflink operation, as that can copy file extent
items from a past generation from some other inode into our inode, so
we have to log them;
2) Start at an offset within i_size - we must log anything at or beyond
i_size, otherwise we would lose prealloc extents after log replay.
The following script exercises a scenario where this happens, and it's
somehow close enough to what happened often on a SQL Server workload which
I had to debug sometime ago to fix an issue where a pattern of writes to
prealloc extents and fsync resulted in fsync failing with -EIO (that was
commit ea7036de0d36c4 ("btrfs: fix fsync failure and transaction abort
after writes to prealloc extents")). In that particular case, we had large
files that had random writes and were often truncated, which made the
next fsync be a full sync.
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
MKFS_OPTIONS="-O no-holes -R free-space-tree"
MOUNT_OPTIONS="-o ssd"
FILE_SIZE=$((1 * 1024 * 1024 * 1024)) # 1G
# FILE_SIZE=$((2 * 1024 * 1024 * 1024)) # 2G
# FILE_SIZE=$((512 * 1024 * 1024)) # 512M
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
# Create a file with many extents. Use direct IO to make it faster
# to create the file - using buffered IO we would have to fsync
# after each write (terribly slow).
echo "Creating file with $((FILE_SIZE / 4096)) extents of 4K each..."
xfs_io -f -d -c "pwrite -b 4K 0 $FILE_SIZE" $MNT/foobar
# Commit the transaction, so every extent after this is from an
# old generation.
sync
# Now rewrite only a few extents, which are all far spread apart from
# each other (e.g. 1G / 32M = 32 extents).
# After this only a few extents have a new generation, while all other
# ones have an old generation.
echo "Rewriting $((FILE_SIZE / (32 * 1024 * 1024))) extents..."
for ((i = 0; i < $FILE_SIZE; i += $((32 * 1024 * 1024)))); do
xfs_io -c "pwrite $i 4K" $MNT/foobar >/dev/null
done
# Fsync, the inode logged in full sync mode since it was never fsynced
# before.
echo "Fsyncing file..."
xfs_io -c "fsync" $MNT/foobar
umount $MNT
And the following bpftrace program was running when executing the test
script:
$ cat bpf-script.sh
#!/usr/bin/bpftrace
k:btrfs_log_inode
{
@start_log_inode[tid] = nsecs;
}
kr:btrfs_log_inode
/@start_log_inode[tid]/
{
@log_inode_dur[tid] = (nsecs - @start_log_inode[tid]) / 1000;
delete(@start_log_inode[tid]);
}
k:btrfs_sync_log
{
@start_sync_log[tid] = nsecs;
}
kr:btrfs_sync_log
/@start_sync_log[tid]/
{
$sync_log_dur = (nsecs - @start_sync_log[tid]) / 1000;
printf("btrfs_log_inode() took %llu us\n", @log_inode_dur[tid]);
printf("btrfs_sync_log() took %llu us\n", $sync_log_dur);
delete(@start_sync_log[tid]);
delete(@log_inode_dur[tid]);
exit();
}
With 512M test file, before this patch:
btrfs_log_inode() took 15218 us
btrfs_sync_log() took 1328 us
Log tree has 17 leaves and 1 node, its total size is 294912 bytes.
With 512M test file, after this patch:
btrfs_log_inode() took 14760 us
btrfs_sync_log() took 588 us
Log tree has a single leaf, its total size is 16K.
With 1G test file, before this patch:
btrfs_log_inode() took 27301 us
btrfs_sync_log() took 1767 us
Log tree has 33 leaves and 1 node, its total size is 557056 bytes.
With 1G test file, after this patch:
btrfs_log_inode() took 26166 us
btrfs_sync_log() took 593 us
Log tree has a single leaf, its total size is 16K
With 2G test file, before this patch:
btrfs_log_inode() took 50892 us
btrfs_sync_log() took 3127 us
Log tree has 65 leaves and 1 node, its total size is 1081344 bytes.
With 2G test file, after this patch:
btrfs_log_inode() took 50126 us
btrfs_sync_log() took 586 us
Log tree has a single leaf, its total size is 16K.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When we want to log an extent, in the fast fsync path, we obtain a path
to the leaf that will hold the file extent item either through a deletion
search, via btrfs_drop_extents(), or through an insertion search using
btrfs_insert_empty_item(). After that we fill the file extent item's
fields one by one directly on the leaf.
Instead of doing that, we could prepare the file extent item before
obtaining a btree path, and then copy the prepared extent item with a
single operation once we get the path. This helps avoid some contention
on the log tree, since we are holding write locks for longer than
necessary, especially in the case where the path is obtained via
btrfs_drop_extents() through a deletion search, which always keeps a
write lock on the nodes at levels 1 and 2 (besides the leaf).
This change does that, we prepare the file extent item that is going to
be inserted before acquiring a path, and then copy it into a leaf using
a single copy operation once we get a path.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The following test was run to measure the impact of the whole patchset:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-R free-space-tree -O no-holes"
NUM_JOBS=8
FILE_SIZE=128M
RUN_TIME=200
cat <<EOF > /tmp/fio-job.ini
[writers]
rw=randwrite
fsync=1
fallocate=none
group_reporting=1
direct=0
bssplit=4k/20:8k/20:16k/20:32k/10:64k/10:128k/5:256k/5:512k/5:1m/5
ioengine=sync
filesize=$FILE_SIZE
runtime=$RUN_TIME
time_based
directory=$MNT
numjobs=$NUM_JOBS
thread
EOF
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
echo
echo "Using config:"
echo
cat /tmp/fio-job.ini
echo
umount $MNT &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
fio /tmp/fio-job.ini
umount $MNT
The test ran inside a VM (8 cores, 32G of RAM) with the target disk
mapping to a raw NVMe device, and using a non-debug kernel config
(Debian's default config).
Before the patchset:
WRITE: bw=116MiB/s (122MB/s), 116MiB/s-116MiB/s (122MB/s-122MB/s), io=22.7GiB (24.4GB), run=200013-200013msec
After the patchset:
WRITE: bw=125MiB/s (131MB/s), 125MiB/s-125MiB/s (131MB/s-131MB/s), io=24.3GiB (26.1GB), run=200007-200007msec
A 7.8% gain on throughput and +7.0% more IO done in the same period of
time (200 seconds).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no point in calling btrfs_release_path() after finishing the loop
that logs the modified extents, since log_one_extent() returns with the
path released. In case the list of extents is empty, the path is already
released, so there's no need for that case as well.
So just remove that unnecessary btrfs_release_path() call.
This change if part of a patchset that is comprised of the following
patches:
1/6 btrfs: remove unnecessary leaf free space checks when pushing items
2/6 btrfs: avoid unnecessary COW of leaves when deleting items from a leaf
3/6 btrfs: avoid unnecessary computation when deleting items from a leaf
4/6 btrfs: remove constraint on number of visited leaves when replacing extents
5/6 btrfs: remove useless path release in the fast fsync path
6/6 btrfs: prepare extents to be logged before locking a log tree path
The last patch in the series has some performance test result in its
changelog.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_log_inode(), we have two variables to track errors and the
return value of the function, named 'ret' and 'err'. In some places we
use 'ret' and if gets a non-zero value we assign its value to 'err'
and then jump to the 'out' label, while in other places we use 'err'
directly without 'ret' as an intermediary. This is inconsistent, error
prone and not necessary. So change that to use only the 'ret' variable,
making this consistent with most functions in btrfs.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During a rename or link operation, we need to determine if an inode was
previously logged or not, and if it was, do some update to the logged
inode. We used to rely exclusively on the logged_trans field of struct
btrfs_inode to determine that, but that was not reliable because the
value of that field is not persisted in the inode item, so it's lost
when an inode is evicted and loaded back again. That led to several
issues in the past, such as not persisting deletions (such as the case
fixed by commit 803f0f64d17769 ("Btrfs: fix fsync not persisting dentry
deletions due to inode evictions")), or resulting in losing a file
after an inode eviction followed by a rename (commit ecc64fab7d49c6
("btrfs: fix lost inode on log replay after mix of fsync, rename and
inode eviction")), besides other issues.
So the inode_logged() helper was introduced and used to determine if an
inode was possibly logged before in the current transaction, with the
caveat that it could return false positives, in the sense that even if an
inode was not logged before in the current transaction, it could still
return true, but never to return false in case the inode was logged.
>From a functional point of view that is fine, but from a performance
perspective it can introduce significant latencies to rename and link
operations, as they will end up doing inode logging even when it is not
necessary.
Recently on a 5.15 kernel, an openSUSE Tumbleweed user reported package
installations and upgrades, with the zypper tool, were often taking a
long time to complete. With strace it could be observed that zypper was
spending about 99% of its time on rename operations, and then with
further analysis we checked that directory logging was happening too
frequently. Taking into account that installation/upgrade of some of the
packages needed a few thousand file renames, the slowdown was very
noticeable for the user.
The issue was caused indirectly due to an excessive number of inode
evictions on a 5.15 kernel, about 100x more compared to a 5.13, 5.14 or
a 5.16-rc8 kernel. While triggering the inode evictions if something
outside btrfs' control, btrfs could still behave better by eliminating
the false positives from the inode_logged() helper.
So change inode_logged() to actually eliminate such false positives caused
by inode eviction and when an inode was never logged since the filesystem
was mounted, as both cases relate to when the logged_trans field of struct
btrfs_inode has a value of zero. When it can not determine if the inode
was logged based only on the logged_trans value, lookup for the existence
of the inode item in the log tree - if it's there then we known the inode
was logged, if it's not there then it can not have been logged in the
current transaction. Once we determine if the inode was logged, update
the logged_trans value to avoid future calls to have to search in the log
tree again.
Alternatively, we could start storing logged_trans in the on disk inode
item structure (struct btrfs_inode_item) in the unused space it still has,
but that would be a bit odd because:
1) We only care about logged_trans since the filesystem was mounted, we
don't care about its value from a previous mount. Having it persisted
in the inode item structure would not make the best use of the precious
unused space;
2) In order to get logged_trans persisted before inode eviction, we would
have to update the delayed inode when we finish logging the inode and
update its logged_trans in struct btrfs_inode, which makes it a bit
cumbersome since we need to check if the delayed inode exists, if not
create it and populate it and deal with any errors (-ENOMEM mostly).
This change is part of a patchset comprised of the following patches:
1/5 btrfs: add helper to delete a dir entry from a log tree
2/5 btrfs: pass the dentry to btrfs_log_new_name() instead of the inode
3/5 btrfs: avoid logging all directory changes during renames
4/5 btrfs: stop doing unnecessary log updates during a rename
5/5 btrfs: avoid inode logging during rename and link when possible
The following test script mimics part of what the zypper tool does during
package installations/upgrades. It does not triggers inode evictions, but
it's similar because it triggers false positives from the inode_logged()
helper, because the inodes have a logged_trans of 0, there's a log tree
due to a fsync of an unrelated file and the directory inode has its
last_trans field set to the current transaction:
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=10000
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
# Now do some change to an unrelated file and fsync it.
# This is just to create a log tree to make sure that inode_logged()
# does not return false when called against "testdir".
xfs_io -f -c "pwrite 0 4K" -c "fsync" $MNT/foo
# Do some change to testdir. This is to make sure inode_logged()
# will return true when called against "testdir", because its
# logged_trans is 0, it was changed in the current transaction
# and there's a log tree.
echo -n > $MNT/testdir/file_$((NUM_FILES + 1))
echo "Renaming $NUM_FILES files..."
start=$(date +%s%N)
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE
done
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "Renames took $dur milliseconds"
umount $MNT
Testing this change on a box using a non-debug kernel (Debian's default
kernel config) gave the following results:
NUM_FILES=10000, before patchset: 27837 ms
NUM_FILES=10000, after patches 1/5 to 4/5 applied: 9236 ms (-66.8%)
NUM_FILES=10000, after whole patchset applied: 8902 ms (-68.0%)
NUM_FILES=5000, before patchset: 9127 ms
NUM_FILES=5000, after patches 1/5 to 4/5 applied: 4640 ms (-49.2%)
NUM_FILES=5000, after whole patchset applied: 4441 ms (-51.3%)
NUM_FILES=2000, before patchset: 2528 ms
NUM_FILES=2000, after patches 1/5 to 4/5 applied: 1983 ms (-21.6%)
NUM_FILES=2000, after whole patchset applied: 1747 ms (-30.9%)
NUM_FILES=1000, before patchset: 1085 ms
NUM_FILES=1000, after patches 1/5 to 4/5 applied: 893 ms (-17.7%)
NUM_FILES=1000, after whole patchset applied: 867 ms (-20.1%)
Running dbench on the same physical machine with the following script:
$ cat run-dbench.sh
#!/bin/bash
NUM_JOBS=$(nproc --all)
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-O no-holes -R free-space-tree"
echo "performance" | \
tee /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
dbench -D $MNT -t 120 $NUM_JOBS
umount $MNT
Before patchset:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 3761352 0.032 143.843
Close 2762770 0.002 2.273
Rename 159304 0.291 67.037
Unlink 759784 0.207 143.998
Deltree 72 4.028 15.977
Mkdir 36 0.003 0.006
Qpathinfo 3409780 0.013 9.678
Qfileinfo 596772 0.001 0.878
Qfsinfo 625189 0.003 1.245
Sfileinfo 306443 0.006 1.840
Find 1318106 0.063 19.798
WriteX 1871137 0.021 8.532
ReadX 5897325 0.003 3.567
LockX 12252 0.003 0.258
UnlockX 12252 0.002 0.100
Flush 263666 3.327 155.632
Throughput 980.047 MB/sec 12 clients 12 procs max_latency=155.636 ms
After whole patchset applied:
Operation Count AvgLat MaxLat
----------------------------------------
NTCreateX 4195584 0.033 107.742
Close 3081932 0.002 1.935
Rename 177641 0.218 14.905
Unlink 847333 0.166 107.822
Deltree 118 5.315 15.247
Mkdir 59 0.004 0.048
Qpathinfo 3802612 0.014 10.302
Qfileinfo 666748 0.001 1.034
Qfsinfo 697329 0.003 0.944
Sfileinfo 341712 0.006 2.099
Find 1470365 0.065 9.359
WriteX 2093921 0.021 8.087
ReadX 6576234 0.003 3.407
LockX 13660 0.003 0.308
UnlockX 13660 0.002 0.114
Flush 294090 2.906 115.539
Throughput 1093.11 MB/sec 12 clients 12 procs max_latency=115.544 ms
+11.5% throughput -25.8% max latency rename max latency -77.8%
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1193549
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During a rename, we call __btrfs_unlink_inode(), which will call
btrfs_del_inode_ref_in_log() and btrfs_del_dir_entries_in_log(), in order
to remove an inode reference and a directory entry from the log. These
are necessary when __btrfs_unlink_inode() is called from the unlink path,
but not necessary when it's called from a rename context, because:
1) For the btrfs_del_inode_ref_in_log() call, it's pointless to delete the
inode reference related to the old name, because later in the rename
path we call btrfs_log_new_name(), which will drop all inode references
from the log and copy all inode references from the subvolume tree to
the log tree. So we are doing one unnecessary btree operation which
adds additional latency and lock contention in case there are other
tasks accessing the log tree;
2) For the btrfs_del_dir_entries_in_log() call, we are now doing the
equivalent at btrfs_log_new_name() since the previous patch in the
series, that has the subject "btrfs: avoid logging all directory
changes during renames". In fact, having __btrfs_unlink_inode() call
this function not only adds additional latency and lock contention due
to the extra btree operation, but also can make btrfs_log_new_name()
unnecessarily log a range item to track the deletion of the old name,
since it has no way to known that the directory entry related to the
old name was previously logged and already deleted by
__btrfs_unlink_inode() through its call to
btrfs_del_dir_entries_in_log().
So skip those calls at __btrfs_unlink_inode() when we are doing a rename.
Skipping them also allows us now to reduce the duration of time we are
pinning a log transaction during renames, which is always beneficial as
it's not delaying so much other tasks trying to sync the log tree, in
particular we end up not holding the log transaction pinned while adding
the new name (adding inode ref, directory entry, etc).
This change is part of a patchset comprised of the following patches:
1/5 btrfs: add helper to delete a dir entry from a log tree
2/5 btrfs: pass the dentry to btrfs_log_new_name() instead of the inode
3/5 btrfs: avoid logging all directory changes during renames
4/5 btrfs: stop doing unnecessary log updates during a rename
5/5 btrfs: avoid inode logging during rename and link when possible
Just like the previous patch in the series, "btrfs: avoid logging all
directory changes during renames", the following script mimics part of
what a package installation/upgrade with zypper does, which is basically
renaming a lot of files, in some directory under /usr, to a name with a
suffix of "-RPMDELETE":
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=10000
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
# Do some change to testdir and fsync it.
echo -n > $MNT/testdir/file_$((NUM_FILES + 1))
xfs_io -c "fsync" $MNT/testdir
echo "Renaming $NUM_FILES files..."
start=$(date +%s%N)
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE
done
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "Renames took $dur milliseconds"
umount $MNT
Testing this change on box a using a non-debug kernel (Debian's default
kernel config) gave the following results:
NUM_FILES=10000, before patchset: 27399 ms
NUM_FILES=10000, after patches 1/5 to 3/5 applied: 9093 ms (-66.8%)
NUM_FILES=10000, after patches 1/5 to 4/5 applied: 9016 ms (-67.1%)
NUM_FILES=5000, before patchset: 9241 ms
NUM_FILES=5000, after patches 1/5 to 3/5 applied: 4642 ms (-49.8%)
NUM_FILES=5000, after patches 1/5 to 4/5 applied: 4553 ms (-50.7%)
NUM_FILES=2000, before patchset: 2550 ms
NUM_FILES=2000, after patches 1/5 to 3/5 applied: 1788 ms (-29.9%)
NUM_FILES=2000, after patches 1/5 to 4/5 applied: 1767 ms (-30.7%)
NUM_FILES=1000, before patchset: 1088 ms
NUM_FILES=1000, after patches 1/5 to 3/5 applied: 905 ms (-16.9%)
NUM_FILES=1000, after patches 1/5 to 4/5 applied: 883 ms (-18.8%)
The next patch in the series (5/5), also contains dbench results after
applying to whole patchset.
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1193549
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When doing a rename of a file, if the file or its old parent directory
were logged before, we log the new name of the file and then make sure
we log the old parent directory, to ensure that after a log replay the
old name of the file is deleted and the new name added.
The logging of the old parent directory can take some time, because it
will scan all leaves modified in the current transaction, check which
directory entries were already logged, copy the ones that were not
logged before, etc. In this rename context all we need to do is make
sure that the old name of the file is deleted on log replay, so instead
of triggering a directory log operation, we can just delete the old
directory entry from the log if it's there, or in case it isn't there,
just log a range item to signal log replay that the old name must be
deleted. So change btrfs_log_new_name() to do that.
This scenario is actually not uncommon to trigger, and recently on a
5.15 kernel, an openSUSE Tumbleweed user reported package installations
and upgrades, with the zypper tool, were often taking a long time to
complete, much more than usual. With strace it could be observed that
zypper was spending over 99% of its time on rename operations, and then
with further analysis we checked that directory logging was happening
too frequently and causing high latencies for the rename operations.
Taking into account that installation/upgrade of some of these packages
needed about a few thousand file renames, the slowdown was very noticeable
for the user.
The issue was caused indirectly due to an excessive number of inode
evictions on a 5.15 kernel, about 100x more compared to a 5.13, 5.14
or a 5.16-rc8 kernel. After an inode eviction we can't tell for sure,
in an efficient way, if an inode was previously logged in the current
transaction, so we are pessimistic and assume it was, because in case
it was we need to update the logged inode. More details on that in one
of the patches in the same series (subject "btrfs: avoid inode logging
during rename and link when possible"). Either way, in case the parent
directory was logged before, we currently do more work then necessary
during a rename, and this change minimizes that amount of work.
The following script mimics part of what a package installation/upgrade
with zypper does, which is basically renaming a lot of files, in some
directory under /usr, to a name with a suffix of "-RPMDELETE":
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=10000
mkfs.btrfs -f $DEV
mount $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
# Do some change to testdir and fsync it.
echo -n > $MNT/testdir/file_$((NUM_FILES + 1))
xfs_io -c "fsync" $MNT/testdir
echo "Renaming $NUM_FILES files..."
start=$(date +%s%N)
for ((i = 1; i <= $NUM_FILES; i++)); do
mv $MNT/testdir/file_$i $MNT/testdir/file_$i-RPMDELETE
done
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "Renames took $dur milliseconds"
umount $MNT
Testing this change on box using a non-debug kernel (Debian's default
kernel config) gave the following results:
NUM_FILES=10000, before this patch: 27399 ms
NUM_FILES=10000, after this patch: 9093 ms (-66.8%)
NUM_FILES=5000, before this patch: 9241 ms
NUM_FILES=5000, after this patch: 4642 ms (-49.8%)
NUM_FILES=2000, before this patch: 2550 ms
NUM_FILES=2000, after this patch: 1788 ms (-29.9%)
NUM_FILES=1000, before this patch: 1088 ms
NUM_FILES=1000, after this patch: 905 ms (-16.9%)
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1193549
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the next patch in the series, there will be the need to access the old
name, and its length, of an inode when logging the inode during a rename.
So instead of passing the inode to btrfs_log_new_name() pass the dentry,
because from the dentry we can get the inode, the name and its length.
This will avoid passing 3 new parameters to btrfs_log_new_name() in the
next patch - the name, its length and an index number. This way we end
up passing only 1 new parameter, the index number.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Move the code that finds and deletes a logged dir entry out of
btrfs_del_dir_entries_in_log() into a helper function. This new helper
function will be used by another patch in the same series, and serves
to avoid having duplicated logic.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging a directory we are trying to log subdirectories that were
changed in the current transaction and created in a past transaction.
This type of behaviour was introduced by commit 2f2ff0ee5e4303 ("Btrfs:
fix metadata inconsistencies after directory fsync"), to fix some metadata
inconsistencies that in the meanwhile no longer need this behaviour due to
numerous other changes that happened throughout the years.
This behaviour, besides not needed anymore, it's also undesirable because:
1) It's not reliable because it's only triggered for the directories
of dentries (dir items) that happen to be present on a leaf that
was changed in the current transaction. If a dentry that points to
a directory resides on a leaf that was not changed in the current
transaction, then it's not logged, as at log_dir_items() and
log_new_dir_dentries() we use btrfs_search_forward();
2) It's not required by posix or any standard, it's undefined territory.
The only way to guarantee a subdirectory is logged, it to explicitly
fsync it;
Making the behaviour guaranteed would require scanning all directory
items, check which point to a directory, and then fsync each subdirectory
which was modified in the current transaction. This could be very
expensive for large directories with many subdirectories and/or large
subdirectories.
So remove that obsolete logic.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging a directory, we go over every leaf of the subvolume tree that
was changed in the current transaction and copy all its dir index keys to
the log tree.
That includes copying dir index keys created in past transactions. This is
done mostly for simplicity, as after logging the keys we log an item that
specifies the start and end ranges of the keys we logged. That item is
then used during log replay to figure out which keys need to be deleted -
every key in that range that we find in the subvolume tree and is not in
the log tree, needs to be deleted.
Now that we log only dir index keys, and not dir item keys anymore, when
we remove dentries from a directory (due to unlink and rename operations),
we can get entire leaves that we changed only for deleting old dir index
keys, or that have few dir index keys that are new - this is due to the
fact that the offset for new index keys comes from a monotonically
increasing counter.
We can avoid logging dir index keys from past transactions, and in order
to track the deletions, only log range items (BTRFS_DIR_LOG_INDEX_KEY key
type) when we find gaps between consecutive index keys. This massively
reduces the amount of logged metadata when we have deleted directory
entries, even if it's a small percentage of the total number of entries.
The reduction comes from both less items that are logged and instead of
logging many dir index items (struct btrfs_dir_item), which have a size
of 30 bytes plus a file name, we typically log just a few range items
(struct btrfs_dir_log_item), which take only 8 bytes each.
Even if no entries were deleted from a directory and only new entries
were added, we typically still get a reduction on the amount of logged
metadata, because it's very likely the first leaf that got the new
dir index entries also has several old dir index entries.
So change the logging logic to not log dir index keys created in past
transactions and log a range item for every gap it finds between each
pair of consecutive index keys, to ensure deletions are tracked and
replayed on log replay.
This patch is part of a patchset comprised of the following patches:
1/4 btrfs: don't log unnecessary boundary keys when logging directory
2/4 btrfs: put initial index value of a directory in a constant
3/4 btrfs: stop copying old dir items when logging a directory
4/4 btrfs: stop trying to log subdirectories created in past transactions
The following test was run on a branch without this patchset and on a
branch with the first three patches applied:
$ cat test.sh
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_FILES=1000000
NUM_FILE_DELETES=10000
MKFS_OPTIONS="-O no-holes -R free-space-tree"
MOUNT_OPTIONS="-o ssd"
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
sync
del_inc=$(( $NUM_FILES / $NUM_FILE_DELETES ))
for ((i = 1; i <= $NUM_FILES; i += $del_inc)); do
rm -f $MNT/testdir/file_$i
done
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "dir fsync took $dur ms after deleting $NUM_FILE_DELETES files"
echo
umount $MNT
The test was run on a non-debug kernel (Debian's default kernel config),
and the results were the following for various values of NUM_FILES and
NUM_FILE_DELETES:
** before, NUM_FILES = 1 000 000, NUM_FILE_DELETES = 10 000 **
dir fsync took 585 ms after deleting 10000 files
** after, NUM_FILES = 1 000 000, NUM_FILE_DELETES = 10 000 **
dir fsync took 34 ms after deleting 10000 files (-94.2%)
** before, NUM_FILES = 100 000, NUM_FILE_DELETES = 1 000 **
dir fsync took 50 ms after deleting 1000 files
** after, NUM_FILES = 100 000, NUM_FILE_DELETES = 1 000 **
dir fsync took 7 ms after deleting 1000 files (-86.0%)
** before, NUM_FILES = 10 000, NUM_FILE_DELETES = 100 **
dir fsync took 9 ms after deleting 100 files
** after, NUM_FILES = 10 000, NUM_FILE_DELETES = 100 **
dir fsync took 5 ms after deleting 100 files (-44.4%)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Before we start to log dir index keys from a leaf, we check if there is a
previous index key, which normally is at the end of a leaf that was not
changed in the current transaction. Then we log that key and set the start
of logged range (item of type BTRFS_DIR_LOG_INDEX_KEY) to the offset of
that key. This is to ensure that if there were deleted index keys between
that key and the first key we are going to log, those deletions are
replayed in case we need to replay to the log after a power failure.
However we really don't need to log that previous key, we can just set the
start of the logged range to that key's offset plus 1. This achieves the
same and avoids logging one dir index key.
The same logic is performed when we finish logging the index keys of a
leaf and we find that the next leaf has index keys and was not changed in
the current transaction. We are logging the first key of that next leaf
and use its offset as the end of range we log. This is just to ensure that
if there were deleted index keys between the last index key we logged and
the first key of that next leaf, those index keys are deleted if we end
up replaying the log. However that is not necessary, we can avoid logging
that first index key of the next leaf and instead set the end of the
logged range to match the offset of that index key minus 1.
So avoid logging those index keys at the boundaries and adjust the start
and end offsets of the logged ranges as described above.
This patch is part of a patchset comprised of the following patches:
1/4 btrfs: don't log unnecessary boundary keys when logging directory
2/4 btrfs: put initial index value of a directory in a constant
3/4 btrfs: stop copying old dir items when logging a directory
4/4 btrfs: stop trying to log subdirectories created in past transactions
Performance test results are listed in the changelog of patch 3/4.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The ->write and ->wait fields of struct walk_control, used for log trees,
are not used since 2008, more specifically since commit d0c803c4049c5c
("Btrfs: Record dirty pages tree-log pages in an extent_io tree") and
since commit d0c803c4049c5c ("Btrfs: Record dirty pages tree-log pages in
an extent_io tree"). So just remove them, along with the function
btrfs_write_tree_block(), which is also not used anymore after removing
the ->write member.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During log replay, whenever we need to check if a name (dentry) exists in
a directory we do searches on the subvolume tree for inode references or
or directory entries (BTRFS_DIR_INDEX_KEY keys, and BTRFS_DIR_ITEM_KEY
keys as well, before kernel 5.17). However when during log replay we
unlink a name, through btrfs_unlink_inode(), we may not delete inode
references and dir index keys from a subvolume tree and instead just add
the deletions to the delayed inode's delayed items, which will only be
run when we commit the transaction used for log replay. This means that
after an unlink operation during log replay, if we attempt to search for
the same name during log replay, we will not see that the name was already
deleted, since the deletion is recorded only on the delayed items.
We run delayed items after every unlink operation during log replay,
except at unlink_old_inode_refs() and at add_inode_ref(). This was due
to an overlook, as delayed items should be run after evert unlink, for
the reasons stated above.
So fix those two cases.
Fixes: 0d836392cadd5 ("Btrfs: fix mount failure after fsync due to hard link recreation")
Fixes: 1f250e929a9c9 ("Btrfs: fix log replay failure after unlink and link combination")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When doing a full fsync, if we have prealloc extents beyond (or at) eof,
and the leaves that contain them were not modified in the current
transaction, we end up not logging them. This results in losing those
extents when we replay the log after a power failure, since the inode is
truncated to the current value of the logged i_size.
Just like for the fast fsync path, we need to always log all prealloc
extents starting at or beyond i_size. The fast fsync case was fixed in
commit 471d557afed155 ("Btrfs: fix loss of prealloc extents past i_size
after fsync log replay") but it missed the full fsync path. The problem
exists since the very early days, when the log tree was added by
commit e02119d5a7b439 ("Btrfs: Add a write ahead tree log to optimize
synchronous operations").
Example reproducer:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
# Create our test file with many file extent items, so that they span
# several leaves of metadata, even if the node/page size is 64K. Use
# direct IO and not fsync/O_SYNC because it's both faster and it avoids
# clearing the full sync flag from the inode - we want the fsync below
# to trigger the slow full sync code path.
$ xfs_io -f -d -c "pwrite -b 4K 0 16M" /mnt/foo
# Now add two preallocated extents to our file without extending the
# file's size. One right at i_size, and another further beyond, leaving
# a gap between the two prealloc extents.
$ xfs_io -c "falloc -k 16M 1M" /mnt/foo
$ xfs_io -c "falloc -k 20M 1M" /mnt/foo
# Make sure everything is durably persisted and the transaction is
# committed. This makes all created extents to have a generation lower
# than the generation of the transaction used by the next write and
# fsync.
sync
# Now overwrite only the first extent, which will result in modifying
# only the first leaf of metadata for our inode. Then fsync it. This
# fsync will use the slow code path (inode full sync bit is set) because
# it's the first fsync since the inode was created/loaded.
$ xfs_io -c "pwrite 0 4K" -c "fsync" /mnt/foo
# Extent list before power failure.
$ xfs_io -c "fiemap -v" /mnt/foo
/mnt/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 2178048..2178055 8 0x0
1: [8..16383]: 26632..43007 16376 0x0
2: [16384..32767]: 2156544..2172927 16384 0x0
3: [32768..34815]: 2172928..2174975 2048 0x800
4: [34816..40959]: hole 6144
5: [40960..43007]: 2174976..2177023 2048 0x801
<power fail>
# Mount fs again, trigger log replay.
$ mount /dev/sdc /mnt
# Extent list after power failure and log replay.
$ xfs_io -c "fiemap -v" /mnt/foo
/mnt/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 2178048..2178055 8 0x0
1: [8..16383]: 26632..43007 16376 0x0
2: [16384..32767]: 2156544..2172927 16384 0x1
# The prealloc extents at file offsets 16M and 20M are missing.
So fix this by calling btrfs_log_prealloc_extents() when we are doing a
full fsync, so that we always log all prealloc extents beyond eof.
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After the recent changes made by commit c2e39305299f01 ("btrfs: clear
extent buffer uptodate when we fail to write it") and its followup fix,
commit 651740a5024117 ("btrfs: check WRITE_ERR when trying to read an
extent buffer"), we can now end up not cleaning up space reservations of
log tree extent buffers after a transaction abort happens, as well as not
cleaning up still dirty extent buffers.
This happens because if writeback for a log tree extent buffer failed,
then we have cleared the bit EXTENT_BUFFER_UPTODATE from the extent buffer
and we have also set the bit EXTENT_BUFFER_WRITE_ERR on it. Later on,
when trying to free the log tree with free_log_tree(), which iterates
over the tree, we can end up getting an -EIO error when trying to read
a node or a leaf, since read_extent_buffer_pages() returns -EIO if an
extent buffer does not have EXTENT_BUFFER_UPTODATE set and has the
EXTENT_BUFFER_WRITE_ERR bit set. Getting that -EIO means that we return
immediately as we can not iterate over the entire tree.
In that case we never update the reserved space for an extent buffer in
the respective block group and space_info object.
When this happens we get the following traces when unmounting the fs:
[174957.284509] BTRFS: error (device dm-0) in cleanup_transaction:1913: errno=-5 IO failure
[174957.286497] BTRFS: error (device dm-0) in free_log_tree:3420: errno=-5 IO failure
[174957.399379] ------------[ cut here ]------------
[174957.402497] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:127 btrfs_put_block_group+0x77/0xb0 [btrfs]
[174957.407523] Modules linked in: btrfs overlay dm_zero (...)
[174957.424917] CPU: 2 PID: 3206883 Comm: umount Tainted: G W 5.16.0-rc5-btrfs-next-109 #1
[174957.426689] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[174957.428716] RIP: 0010:btrfs_put_block_group+0x77/0xb0 [btrfs]
[174957.429717] Code: 21 48 8b bd (...)
[174957.432867] RSP: 0018:ffffb70d41cffdd0 EFLAGS: 00010206
[174957.433632] RAX: 0000000000000001 RBX: ffff8b09c3848000 RCX: ffff8b0758edd1c8
[174957.434689] RDX: 0000000000000001 RSI: ffffffffc0b467e7 RDI: ffff8b0758edd000
[174957.436068] RBP: ffff8b0758edd000 R08: 0000000000000000 R09: 0000000000000000
[174957.437114] R10: 0000000000000246 R11: 0000000000000000 R12: ffff8b09c3848148
[174957.438140] R13: ffff8b09c3848198 R14: ffff8b0758edd188 R15: dead000000000100
[174957.439317] FS: 00007f328fb82800(0000) GS:ffff8b0a2d200000(0000) knlGS:0000000000000000
[174957.440402] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[174957.441164] CR2: 00007fff13563e98 CR3: 0000000404f4e005 CR4: 0000000000370ee0
[174957.442117] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[174957.443076] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[174957.443948] Call Trace:
[174957.444264] <TASK>
[174957.444538] btrfs_free_block_groups+0x255/0x3c0 [btrfs]
[174957.445238] close_ctree+0x301/0x357 [btrfs]
[174957.445803] ? call_rcu+0x16c/0x290
[174957.446250] generic_shutdown_super+0x74/0x120
[174957.446832] kill_anon_super+0x14/0x30
[174957.447305] btrfs_kill_super+0x12/0x20 [btrfs]
[174957.447890] deactivate_locked_super+0x31/0xa0
[174957.448440] cleanup_mnt+0x147/0x1c0
[174957.448888] task_work_run+0x5c/0xa0
[174957.449336] exit_to_user_mode_prepare+0x1e5/0x1f0
[174957.449934] syscall_exit_to_user_mode+0x16/0x40
[174957.450512] do_syscall_64+0x48/0xc0
[174957.450980] entry_SYSCALL_64_after_hwframe+0x44/0xae
[174957.451605] RIP: 0033:0x7f328fdc4a97
[174957.452059] Code: 03 0c 00 f7 (...)
[174957.454320] RSP: 002b:00007fff13564ec8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[174957.455262] RAX: 0000000000000000 RBX: 00007f328feea264 RCX: 00007f328fdc4a97
[174957.456131] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000560b8ae51dd0
[174957.457118] RBP: 0000560b8ae51ba0 R08: 0000000000000000 R09: 00007fff13563c40
[174957.458005] R10: 00007f328fe49fc0 R11: 0000000000000246 R12: 0000000000000000
[174957.459113] R13: 0000560b8ae51dd0 R14: 0000560b8ae51cb0 R15: 0000000000000000
[174957.460193] </TASK>
[174957.460534] irq event stamp: 0
[174957.461003] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[174957.461947] hardirqs last disabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.463147] softirqs last enabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.465116] softirqs last disabled at (0): [<0000000000000000>] 0x0
[174957.466323] ---[ end trace bc7ee0c490bce3af ]---
[174957.467282] ------------[ cut here ]------------
[174957.468184] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:3976 btrfs_free_block_groups+0x330/0x3c0 [btrfs]
[174957.470066] Modules linked in: btrfs overlay dm_zero (...)
[174957.483137] CPU: 2 PID: 3206883 Comm: umount Tainted: G W 5.16.0-rc5-btrfs-next-109 #1
[174957.484691] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[174957.486853] RIP: 0010:btrfs_free_block_groups+0x330/0x3c0 [btrfs]
[174957.488050] Code: 00 00 00 ad de (...)
[174957.491479] RSP: 0018:ffffb70d41cffde0 EFLAGS: 00010206
[174957.492520] RAX: ffff8b08d79310b0 RBX: ffff8b09c3848000 RCX: 0000000000000000
[174957.493868] RDX: 0000000000000001 RSI: fffff443055ee600 RDI: ffffffffb1131846
[174957.495183] RBP: ffff8b08d79310b0 R08: 0000000000000000 R09: 0000000000000000
[174957.496580] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8b08d7931000
[174957.498027] R13: ffff8b09c38492b0 R14: dead000000000122 R15: dead000000000100
[174957.499438] FS: 00007f328fb82800(0000) GS:ffff8b0a2d200000(0000) knlGS:0000000000000000
[174957.500990] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[174957.502117] CR2: 00007fff13563e98 CR3: 0000000404f4e005 CR4: 0000000000370ee0
[174957.503513] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[174957.504864] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[174957.506167] Call Trace:
[174957.506654] <TASK>
[174957.507047] close_ctree+0x301/0x357 [btrfs]
[174957.507867] ? call_rcu+0x16c/0x290
[174957.508567] generic_shutdown_super+0x74/0x120
[174957.509447] kill_anon_super+0x14/0x30
[174957.510194] btrfs_kill_super+0x12/0x20 [btrfs]
[174957.511123] deactivate_locked_super+0x31/0xa0
[174957.511976] cleanup_mnt+0x147/0x1c0
[174957.512610] task_work_run+0x5c/0xa0
[174957.513309] exit_to_user_mode_prepare+0x1e5/0x1f0
[174957.514231] syscall_exit_to_user_mode+0x16/0x40
[174957.515069] do_syscall_64+0x48/0xc0
[174957.515718] entry_SYSCALL_64_after_hwframe+0x44/0xae
[174957.516688] RIP: 0033:0x7f328fdc4a97
[174957.517413] Code: 03 0c 00 f7 d8 (...)
[174957.521052] RSP: 002b:00007fff13564ec8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[174957.522514] RAX: 0000000000000000 RBX: 00007f328feea264 RCX: 00007f328fdc4a97
[174957.523950] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000560b8ae51dd0
[174957.525375] RBP: 0000560b8ae51ba0 R08: 0000000000000000 R09: 00007fff13563c40
[174957.526763] R10: 00007f328fe49fc0 R11: 0000000000000246 R12: 0000000000000000
[174957.528058] R13: 0000560b8ae51dd0 R14: 0000560b8ae51cb0 R15: 0000000000000000
[174957.529404] </TASK>
[174957.529843] irq event stamp: 0
[174957.530256] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[174957.531061] hardirqs last disabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.532075] softirqs last enabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.533083] softirqs last disabled at (0): [<0000000000000000>] 0x0
[174957.533865] ---[ end trace bc7ee0c490bce3b0 ]---
[174957.534452] BTRFS info (device dm-0): space_info 4 has 1070841856 free, is not full
[174957.535404] BTRFS info (device dm-0): space_info total=1073741824, used=2785280, pinned=0, reserved=49152, may_use=0, readonly=65536 zone_unusable=0
[174957.537029] BTRFS info (device dm-0): global_block_rsv: size 0 reserved 0
[174957.537859] BTRFS info (device dm-0): trans_block_rsv: size 0 reserved 0
[174957.538697] BTRFS info (device dm-0): chunk_block_rsv: size 0 reserved 0
[174957.539552] BTRFS info (device dm-0): delayed_block_rsv: size 0 reserved 0
[174957.540403] BTRFS info (device dm-0): delayed_refs_rsv: size 0 reserved 0
This also means that in case we have log tree extent buffers that are
still dirty, we can end up not cleaning them up in case we find an
extent buffer with EXTENT_BUFFER_WRITE_ERR set on it, as in that case
we have no way for iterating over the rest of the tree.
This issue is very often triggered with test cases generic/475 and
generic/648 from fstests.
The issue could almost be fixed by iterating over the io tree attached to
each log root which keeps tracks of the range of allocated extent buffers,
log_root->dirty_log_pages, however that does not work and has some
inconveniences:
1) After we sync the log, we clear the range of the extent buffers from
the io tree, so we can't find them after writeback. We could keep the
ranges in the io tree, with a separate bit to signal they represent
extent buffers already written, but that means we need to hold into
more memory until the transaction commits.
How much more memory is used depends a lot on whether we are able to
allocate contiguous extent buffers on disk (and how often) for a log
tree - if we are able to, then a single extent state record can
represent multiple extent buffers, otherwise we need multiple extent
state record structures to track each extent buffer.
In fact, my earlier approach did that:
https://lore.kernel.org/linux-btrfs/3aae7c6728257c7ce2279d6660ee2797e5e34bbd.1641300250.git.fdmanana@suse.com/
However that can cause a very significant negative impact on
performance, not only due to the extra memory usage but also because
we get a larger and deeper dirty_log_pages io tree.
We got a report that, on beefy machines at least, we can get such
performance drop with fsmark for example:
https://lore.kernel.org/linux-btrfs/20220117082426.GE32491@xsang-OptiPlex-9020/
2) We would be doing it only to deal with an unexpected and exceptional
case, which is basically failure to read an extent buffer from disk
due to IO failures. On a healthy system we don't expect transaction
aborts to happen after all;
3) Instead of relying on iterating the log tree or tracking the ranges
of extent buffers in the dirty_log_pages io tree, using the radix
tree that tracks extent buffers (fs_info->buffer_radix) to find all
log tree extent buffers is not reliable either, because after writeback
of an extent buffer it can be evicted from memory by the release page
callback of the btree inode (btree_releasepage()).
Since there's no way to be able to properly cleanup a log tree without
being able to read its extent buffers from disk and without using more
memory to track the logical ranges of the allocated extent buffers do
the following:
1) When we fail to cleanup a log tree, setup a flag that indicates that
failure;
2) Trigger writeback of all log tree extent buffers that are still dirty,
and wait for the writeback to complete. This is just to cleanup their
state, page states, page leaks, etc;
3) When unmounting the fs, ignore if the number of bytes reserved in a
block group and in a space_info is not 0 if, and only if, we failed to
cleanup a log tree. Also ignore only for metadata block groups and the
metadata space_info object.
This is far from a perfect solution, but it serves to silence test
failures such as those from generic/475 and generic/648. However having
a non-zero value for the reserved bytes counters on unmount after a
transaction abort, is not such a terrible thing and it's completely
harmless, it does not affect the filesystem integrity in any way.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We only throttle the btrfs_truncate_inode_items if the root is
SHAREABLE, which isn't set on the log root, which means this loop is
unnecessary.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the future we're going to want to use btrfs_truncate_inode_items
without looking up the associated inode. In order to accommodate this
add the inode to btrfs_truncate_control and handle the case where
control->inode is NULL appropriately. This is fairly straightforward,
we simply need to add a helper for the trace points, as the file extent
map update is controlled by a flag on btrfs_truncate_control.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the future we are going to want to truncate inode items without
needing to have an btrfs_inode to pass in, so add ino to the
btrfs_truncate_control and use that to look up the inode items to
truncate.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We've had weird bugs in the past where we forgot to adjust the truncate
path to deal with the fact that we can be called by the tree log path.
Instead of checking if our root is a LOG_ROOT use a flag on the
btrfs_truncate_control to indicate that we don't want to do extent
reference updates during this truncate.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
I'm going to be adding more arguments and counters to
btrfs_truncate_inode_items, so add a control struct to handle all of the
extra arguments to make it easier to follow.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a few helpers in inode-item.c, and I'm going to make a few
changes to how we do truncate in the future, so break out these
definitions into their own header file to trim down ctree.h some and
make it easier to do the work on truncate in the future.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We are going to have multiple csum roots in the future, so convert all
users of ->csum_root to btrfs_csum_root() and rename ->csum_root to
->_csum_root so we can easily find remaining users in the future.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that all call sites are using the slot number to modify item values,
rename the SETGET helpers to raw_item_*(), and then rework the _nr()
helpers to be the btrfs_item_*() btrfs_set_item_*() helpers, and then
rename all of the callers to the new helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we log only dir index keys when logging a directory, we no longer
need to deal with dir item keys in the log replay code for replaying
directory deletes. This is also true for the case when we replay a log
tree created by a kernel that still logs dir items.
So remove the remaining code of the replay of directory deletes algorithm
that deals with dir item keys.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, when logging a directory, we copy both dir items and dir index
items from the fs/subvolume tree to the log tree. Both items have exactly
the same data (same struct btrfs_dir_item), the difference lies in the key
values, where a dir index key contains the index number of a directory
entry while the dir item key does not, as it's used for doing fast lookups
of an entry by name, while the former is used for sorting entries when
listing a directory.
We can exploit that and log only the dir index items, since they contain
all the information needed to correctly add, replace and delete directory
entries when replaying a log tree. Logging only the dir index items is
also backward and forward compatible: an unpatched kernel (without this
change) can correctly replay a log tree generated by a patched kernel
(with this patch), and a patched kernel can correctly replay a log tree
generated by an unpatched kernel.
The backward compatibility is ensured because:
1) For inserting a new dentry: a dentry is only inserted when we find a
new dir index key - we can only insert if we know the dir index offset,
which is encoded in the dir index key's offset;
2) For deleting dentries: during log replay, before adding or replacing
dentries, we first replay dentry deletions. Whenever we find a dir item
key or a dir index key in the subvolume/fs tree that is not logged in
a range for which the log tree is authoritative, we do the unlink of
the dentry, which removes both the existing dir item key and the dir
index key. Therefore logging just dir index keys is enough to ensure
dentry deletions are correctly replayed;
3) For dentry replacements: they work when we log only dir index keys
and this is mostly due to a combination of 1) and 2). If we replace a
dentry with name "foobar" to point from inode A to inode B, then we
know the dir index key for the new dentry is different from the old
one, as it has an index number (key offset) larger than the old one.
This results in replaying a deletion, through replay_dir_deletes(),
that causes the old dentry to be removed, both the dir item key and
the dir index key, as mentioned at 2). Then when processing the new
dir index key, we add the new dentry, adding both a new dir item key
and a new index key pointing to inode B, as stated in 1).
The forward compatibility, the ability for a patched kernel to replay a
log created by an older, unpatched kernel, comes from the changes required
for making sure we are able to replay a log that only contains dir index
keys - we simply ignore every dir item key we find.
So modify directory logging to log only dir index items, and modify the
log replay process to ignore dir item keys, from log trees created by an
unpatched kernel, and process only with dir index keys. This reduces the
amount of logged metadata by about half, and therefore the time spent
logging or fsyncing large directories (less CPU time and less IO).
The following test script was used to measure this change:
#!/bin/bash
DEV=/dev/nvme0n1
MNT=/mnt/nvme0n1
NUM_NEW_FILES=1000000
NUM_FILE_DELETES=10000
mkfs.btrfs -f $DEV
mount -o ssd $DEV $MNT
mkdir $MNT/testdir
for ((i = 1; i <= $NUM_NEW_FILES; i++)); do
echo -n > $MNT/testdir/file_$i
done
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "dir fsync took $dur ms after adding $NUM_NEW_FILES files"
# sync to force transaction commit and wipeout the log.
sync
del_inc=$(( $NUM_NEW_FILES / $NUM_FILE_DELETES ))
for ((i = 1; i <= $NUM_NEW_FILES; i += $del_inc)); do
rm -f $MNT/testdir/file_$i
done
start=$(date +%s%N)
xfs_io -c "fsync" $MNT/testdir
end=$(date +%s%N)
dur=$(( (end - start) / 1000000 ))
echo "dir fsync took $dur ms after deleting $NUM_FILE_DELETES files"
echo
umount $MNT
The tests were run on a physical machine, with a non-debug kernel (Debian's
default kernel config), for different values of $NUM_NEW_FILES and
$NUM_FILE_DELETES, and the results were the following:
** Before patch, NUM_NEW_FILES = 1 000 000, NUM_DELETE_FILES = 10 000 **
dir fsync took 8412 ms after adding 1000000 files
dir fsync took 500 ms after deleting 10000 files
** After patch, NUM_NEW_FILES = 1 000 000, NUM_DELETE_FILES = 10 000 **
dir fsync took 4252 ms after adding 1000000 files (-49.5%)
dir fsync took 269 ms after deleting 10000 files (-46.2%)
** Before patch, NUM_NEW_FILES = 100 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 745 ms after adding 100000 files
dir fsync took 59 ms after deleting 1000 files
** After patch, NUM_NEW_FILES = 100 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 404 ms after adding 100000 files (-45.8%)
dir fsync took 31 ms after deleting 1000 files (-47.5%)
** Before patch, NUM_NEW_FILES = 10 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 67 ms after adding 10000 files
dir fsync took 9 ms after deleting 1000 files
** After patch, NUM_NEW_FILES = 10 000, NUM_DELETE_FILES = 1 000 **
dir fsync took 36 ms after adding 10000 files (-46.3%)
dir fsync took 5 ms after deleting 1000 files (-44.4%)
** Before patch, NUM_NEW_FILES = 1 000, NUM_DELETE_FILES = 100 **
dir fsync took 9 ms after adding 1000 files
dir fsync took 4 ms after deleting 100 files
** After patch, NUM_NEW_FILES = 1 000, NUM_DELETE_FILES = 100 **
dir fsync took 7 ms after adding 1000 files (-22.2%)
dir fsync took 3 ms after deleting 100 files (-25.0%)
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When logging a directory, once we finish processing a leaf that is full
of dir items, if we find the next leaf was not modified in the current
transaction, we grab the first key of that next leaf and log it as to
mark the end of a key range boundary.
However we did not update the value of ctx->last_dir_item_offset, which
tracks the offset of the last logged key. This can result in subsequent
logging of the same directory in the current transaction to not realize
that key was already logged, and then add it to the middle of a batch
that starts with a lower key, resulting later in a leaf with one key
that is duplicated and at non-consecutive slots. When that happens we get
an error later when writing out the leaf, reporting that there is a pair
of keys in wrong order. The report is something like the following:
Dec 13 21:44:50 kernel: BTRFS critical (device dm-0): corrupt leaf:
root=18446744073709551610 block=118444032 slot=21, bad key order, prev
(704687 84 4146773349) current (704687 84 1063561078)
Dec 13 21:44:50 kernel: BTRFS info (device dm-0): leaf 118444032 gen
91449 total ptrs 39 free space 546 owner 18446744073709551610
Dec 13 21:44:50 kernel: item 0 key (704687 1 0) itemoff 3835
itemsize 160
Dec 13 21:44:50 kernel: inode generation 35532 size
1026 mode 40755
Dec 13 21:44:50 kernel: item 1 key (704687 12 704685) itemoff
3822 itemsize 13
Dec 13 21:44:50 kernel: item 2 key (704687 24 3817753667)
itemoff 3736 itemsize 86
Dec 13 21:44:50 kernel: item 3 key (704687 60 0) itemoff 3728 itemsize 8
Dec 13 21:44:50 kernel: item 4 key (704687 72 0) itemoff 3720 itemsize 8
Dec 13 21:44:50 kernel: item 5 key (704687 84 140445108)
itemoff 3666 itemsize 54
Dec 13 21:44:50 kernel: dir oid 704793 type 1
Dec 13 21:44:50 kernel: item 6 key (704687 84 298800632)
itemoff 3599 itemsize 67
Dec 13 21:44:50 kernel: dir oid 707849 type 2
Dec 13 21:44:50 kernel: item 7 key (704687 84 476147658)
itemoff 3532 itemsize 67
Dec 13 21:44:50 kernel: dir oid 707901 type 2
Dec 13 21:44:50 kernel: item 8 key (704687 84 633818382)
itemoff 3471 itemsize 61
Dec 13 21:44:50 kernel: dir oid 704694 type 2
Dec 13 21:44:50 kernel: item 9 key (704687 84 654256665)
itemoff 3403 itemsize 68
Dec 13 21:44:50 kernel: dir oid 707841 type 1
Dec 13 21:44:50 kernel: item 10 key (704687 84 995843418)
itemoff 3331 itemsize 72
Dec 13 21:44:50 kernel: dir oid 2167736 type 1
Dec 13 21:44:50 kernel: item 11 key (704687 84 1063561078)
itemoff 3278 itemsize 53
Dec 13 21:44:50 kernel: dir oid 704799 type 2
Dec 13 21:44:50 kernel: item 12 key (704687 84 1101156010)
itemoff 3225 itemsize 53
Dec 13 21:44:50 kernel: dir oid 704696 type 1
Dec 13 21:44:50 kernel: item 13 key (704687 84 2521936574)
itemoff 3173 itemsize 52
Dec 13 21:44:50 kernel: dir oid 704704 type 2
Dec 13 21:44:50 kernel: item 14 key (704687 84 2618368432)
itemoff 3112 itemsize 61
Dec 13 21:44:50 kernel: dir oid 704738 type 1
Dec 13 21:44:50 kernel: item 15 key (704687 84 2676316190)
itemoff 3046 itemsize 66
Dec 13 21:44:50 kernel: dir oid 2167729 type 1
Dec 13 21:44:50 kernel: item 16 key (704687 84 3319104192)
itemoff 2986 itemsize 60
Dec 13 21:44:50 kernel: dir oid 704745 type 2
Dec 13 21:44:50 kernel: item 17 key (704687 84 3908046265)
itemoff 2929 itemsize 57
Dec 13 21:44:50 kernel: dir oid 2167734 type 1
Dec 13 21:44:50 kernel: item 18 key (704687 84 3945713089)
itemoff 2857 itemsize 72
Dec 13 21:44:50 kernel: dir oid 2167730 type 1
Dec 13 21:44:50 kernel: item 19 key (704687 84 4077169308)
itemoff 2795 itemsize 62
Dec 13 21:44:50 kernel: dir oid 704688 type 1
Dec 13 21:44:50 kernel: item 20 key (704687 84 4146773349)
itemoff 2727 itemsize 68
Dec 13 21:44:50 kernel: dir oid 707892 type 1
Dec 13 21:44:50 kernel: item 21 key (704687 84 1063561078)
itemoff 2674 itemsize 53
Dec 13 21:44:50 kernel: dir oid 704799 type 2
Dec 13 21:44:50 kernel: item 22 key (704687 96 2) itemoff 2612
itemsize 62
Dec 13 21:44:50 kernel: item 23 key (704687 96 6) itemoff 2551
itemsize 61
Dec 13 21:44:50 kernel: item 24 key (704687 96 7) itemoff 2498
itemsize 53
Dec 13 21:44:50 kernel: item 25 key (704687 96 12) itemoff
2446 itemsize 52
Dec 13 21:44:50 kernel: item 26 key (704687 96 14) itemoff
2385 itemsize 61
Dec 13 21:44:50 kernel: item 27 key (704687 96 18) itemoff
2325 itemsize 60
Dec 13 21:44:50 kernel: item 28 key (704687 96 24) itemoff
2271 itemsize 54
Dec 13 21:44:50 kernel: item 29 key (704687 96 28) itemoff
2218 itemsize 53
Dec 13 21:44:50 kernel: item 30 key (704687 96 62) itemoff
2150 itemsize 68
Dec 13 21:44:50 kernel: item 31 key (704687 96 66) itemoff
2083 itemsize 67
Dec 13 21:44:50 kernel: item 32 key (704687 96 75) itemoff
2015 itemsize 68
Dec 13 21:44:50 kernel: item 33 key (704687 96 79) itemoff
1948 itemsize 67
Dec 13 21:44:50 kernel: item 34 key (704687 96 82) itemoff
1882 itemsize 66
Dec 13 21:44:50 kernel: item 35 key (704687 96 83) itemoff
1810 itemsize 72
Dec 13 21:44:50 kernel: item 36 key (704687 96 85) itemoff
1753 itemsize 57
Dec 13 21:44:50 kernel: item 37 key (704687 96 87) itemoff
1681 itemsize 72
Dec 13 21:44:50 kernel: item 38 key (704694 1 0) itemoff 1521
itemsize 160
Dec 13 21:44:50 kernel: inode generation 35534 size 30
mode 40755
Dec 13 21:44:50 kernel: BTRFS error (device dm-0): block=118444032
write time tree block corruption detected
So fix that by adding the missing update of ctx->last_dir_item_offset with
the offset of the boundary key.
Reported-by: Chris Murphy <lists@colorremedies.com>
Link: https://lore.kernel.org/linux-btrfs/CAJCQCtT+RSzpUjbMq+UfzNUMe1X5+1G+DnAGbHC=OZ=iRS24jg@mail.gmail.com/
Fixes: dc2872247ec0ca ("btrfs: keep track of the last logged keys when logging a directory")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Line 1169 (#3) allocates a memory chunk for victim_name by kmalloc(),
but when the function returns in line 1184 (#4) victim_name allocated
by line 1169 (#3) is not freed, which will lead to a memory leak.
There is a similar snippet of code in this function as allocating a memory
chunk for victim_name in line 1104 (#1) as well as releasing the memory
in line 1116 (#2).
We should kfree() victim_name when the return value of backref_in_log()
is less than zero and before the function returns in line 1184 (#4).
1057 static inline int __add_inode_ref(struct btrfs_trans_handle *trans,
1058 struct btrfs_root *root,
1059 struct btrfs_path *path,
1060 struct btrfs_root *log_root,
1061 struct btrfs_inode *dir,
1062 struct btrfs_inode *inode,
1063 u64 inode_objectid, u64 parent_objectid,
1064 u64 ref_index, char *name, int namelen,
1065 int *search_done)
1066 {
1104 victim_name = kmalloc(victim_name_len, GFP_NOFS);
// #1: kmalloc (victim_name-1)
1105 if (!victim_name)
1106 return -ENOMEM;
1112 ret = backref_in_log(log_root, &search_key,
1113 parent_objectid, victim_name,
1114 victim_name_len);
1115 if (ret < 0) {
1116 kfree(victim_name); // #2: kfree (victim_name-1)
1117 return ret;
1118 } else if (!ret) {
1169 victim_name = kmalloc(victim_name_len, GFP_NOFS);
// #3: kmalloc (victim_name-2)
1170 if (!victim_name)
1171 return -ENOMEM;
1180 ret = backref_in_log(log_root, &search_key,
1181 parent_objectid, victim_name,
1182 victim_name_len);
1183 if (ret < 0) {
1184 return ret; // #4: missing kfree (victim_name-2)
1185 } else if (!ret) {
1241 return 0;
1242 }
Fixes: d3316c8233bb ("btrfs: Properly handle backref_in_log retval")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a report of a transaction abort of -EAGAIN with the following
script.
#!/bin/sh
for d in sda sdb; do
mkfs.btrfs -d single -m single -f /dev/\${d}
done
mount /dev/sda /mnt/test
mount /dev/sdb /mnt/scratch
for dir in test scratch; do
echo 3 >/proc/sys/vm/drop_caches
fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \
--numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \
--group_reporting |& tee /dev/shm/fio.\${dir}
echo 3 >/proc/sys/vm/drop_caches
done
for d in sda sdb; do
umount /dev/\${d}
done
The stack trace is shown in below.
[3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction)
[3310.968060] BTRFS info (device sda): forced readonly
[3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction.
[3310.968065] ------------[ cut here ]------------
[3310.968066] BTRFS: Transaction aborted (error -11)
[3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8
[3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1
[3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021
[3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8
[3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282
[3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027
[3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00
[3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48
[3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00
[3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58
[3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000
[3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0
[3310.968160] PKRU: 55555554
[3310.968161] Call Trace:
[3310.968167] ? dput+0xd4/0x300
[3310.968174] btrfs_sync_file+0x3f1/0x490
[3310.968180] __x64_sys_fsync+0x33/0x60
[3310.968185] do_syscall_64+0x3b/0x90
[3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae
[3310.968194] RIP: 0033:0x7efe6557329b
[3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b
[3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006
[3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010
[3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980
[3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000
[3310.968212] ---[ end trace 1a346f4d3c0d96ba ]---
[3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown
The abort occurs because of a write hole while writing out freeing tree
nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree
node to ensure btrfs can write the region and does not leave a hole on
write on a zoned device. The current code fails to re-dirty a node
when the tree-log tree's depth is greater or equal to 2. That leads to
a transaction abort with -EAGAIN.
Fix the issue by properly re-dirtying a node on walking up the tree.
Fixes: d3575156f662 ("btrfs: zoned: redirty released extent buffers")
CC: stable@vger.kernel.org # 5.12+
Link: https://github.com/kdave/btrfs-progs/issues/415
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The root argument passed to check_item_in_log() always matches the root
of the given directory, so it can be eliminated.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The root argument for tree-log.c:add_link() always matches the root of the
given directory and the given inode, so it can eliminated.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The root argument passed to btrfs_unlink_inode() and its callee,
__btrfs_unlink_inode(), always matches the root of the given directory and
the given inode. So remove the argument and make __btrfs_unlink_inode()
use the root of the directory.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The root argument for drop_one_dir_item() always matches the root of the
given directory inode, since each log tree is associated to one and only
one subvolume/root, so remove the argument.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At replay_dir_deletes(), if find_dir_range() returns an error we break out
of the main while loop and then assign a value of 0 (success) to the 'ret'
variable, resulting in completely ignoring that an error happened. Fix
that by jumping to the 'out' label when find_dir_range() returns an error
(negative value).
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In order to make 'real_root' used only in ref-verify it's required to
have the necessary context to perform the same checks that this member
is used for. So add 'mod_root' which will contain the root on behalf of
which a delayed ref was created and a 'skip_group' parameter which
will contain callsite-specific override of skip_qgroup.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a few flags that are inconsistently used to describe the fs in
different states of failure. As of 5963ffcaf383 ("btrfs: always abort
the transaction if we abort a trans handle") we will always set
BTRFS_FS_STATE_ERROR if we abort, so we don't have to check both ABORTED
and ERROR to see if things have gone wrong. Add a helper to check
BTRFS_FS_STATE_ERROR and then convert all checkers of FS_STATE_ERROR to
use the helper.
The TRANS_ABORTED bit check was added in af7227338135 ("Btrfs: clean up
resources during umount after trans is aborted") but is not actually
specific.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
