summaryrefslogtreecommitdiff
path: root/fs/ext4/ext4_jbd2.h
AgeCommit message (Collapse)Author
2020-12-22ext4: drop ext4_handle_dirty_super()Jan Kara
The wrapper is now useless since it does what ext4_handle_dirty_metadata() does. Just remove it. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201216101844.22917-9-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-12-03ext4: add helpers for checking whether quota can be enabled/is journalledRoman Anufriev
Right now, there are several places, where we check whether fs is capable of enabling quota or if quota is journalled with quite long and non-self-descriptive condition statements. This patch wraps these statements into helpers for better readability and easier usage. Link: https://lore.kernel.org/r/1603336860-16153-1-git-send-email-dotdot@yandex-team.ru Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Roman Anufriev <dotdot@yandex-team.ru> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03ext4: drop ext4_journal_free_reserved()Jan Kara
Remove ext4_journal_free_reserved() function. It is never used. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200520133119.1383-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-06-03ext4: handle ext4_mark_inode_dirty errorsHarshad Shirwadkar
ext4_mark_inode_dirty() can fail for real reasons. Ignoring its return value may lead ext4 to ignore real failures that would result in corruption / crashes. Harden ext4_mark_inode_dirty error paths to fail as soon as possible and return errors to the caller whenever appropriate. One of the possible scnearios when this bug could affected is that while creating a new inode, its directory entry gets added successfully but while writing the inode itself mark_inode_dirty returns error which is ignored. This would result in inconsistency that the directory entry points to a non-existent inode. Ran gce-xfstests smoke tests and verified that there were no regressions. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20200427013438.219117-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-03-26ext4: disable dioread_nolock whenever delayed allocation is disabledEric Whitney
The patch "ext4: make dioread_nolock the default" (244adf6426ee) causes generic/422 to fail when run in kvm-xfstests' ext3conv test case. This applies both the dioread_nolock and nodelalloc mount options, a combination not previously tested by kvm-xfstests. The failure occurs because the dioread_nolock code path splits a previously fallocated multiblock extent into a series of single block extents when overwriting a portion of that extent. That causes allocation of an extent tree leaf node and a reshuffling of extents. Once writeback is completed, the individual extents are recombined into a single extent, the extent is moved again, and the leaf node is deleted. The difference in block utilization before and after writeback due to the leaf node triggers the failure. The original reason for this behavior was to avoid ENOSPC when handling I/O completions during writeback in the dioread_nolock code paths when delayed allocation is disabled. It may no longer be necessary, because code was added in the past to reserve extra space to solve this problem when delayed allocation is enabled, and this code may also apply when delayed allocation is disabled. Until this can be verified, don't use the dioread_nolock code paths if delayed allocation is disabled. Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20200319150028.24592-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-01-17ext4: uninline ext4_inode_journal_mode()Eric Biggers
Determining an inode's journaling mode has gotten more complicated over time. Move ext4_inode_journal_mode() from an inline function into ext4_jbd2.c to reduce the compiled code size. Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20191209233602.117778-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2019-11-05ext4: Reserve revoke credits for freed blocksJan Kara
So far we have reserved only relatively high fixed amount of revoke credits for each transaction. We over-reserved by large amount for most cases but when freeing large directories or files with data journalling, the fixed amount is not enough. In fact the worst case estimate is inconveniently large (maximum extent size) for freeing of one extent. We fix this by doing proper estimate of the amount of blocks that need to be revoked when removing blocks from the inode due to truncate or hole punching and otherwise reserve just a small amount of revoke credits for each transaction to accommodate freeing of xattrs block or so. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-23-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05jbd2: Reserve space for revoke descriptor blocksJan Kara
Extend functions for starting, extending, and restarting transaction handles to take number of revoke records handle must be able to accommodate. These functions then make sure transaction has enough credits to be able to store resulting revoke descriptor blocks. Also revoke code tracks number of revoke records created by a handle to catch situation where some place didn't reserve enough space for revoke records. Similarly to standard transaction credits, space for unused reserved revoke records is released when the handle is stopped. On the ext4 side we currently take a simplistic approach of reserving space for 1024 revoke records for any transaction. This grows amount of credits reserved for each handle only by a few and is enough for any normal workload so that we don't hit warnings in jbd2. We will refine the logic in following commits. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-20-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05ext4, jbd2: Provide accessor function for handle creditsJan Kara
Provide accessor function to get number of credits available in a handle and use it from ext4. Later, computation of available credits won't be so straightforward. Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-11-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05ext4: Provide function to handle transaction restartsJan Kara
Provide ext4_journal_ensure_credits_fn() function to ensure transaction has given amount of credits and call helper function to prepare for restarting a transaction. This allows to remove some boilerplate code from various places, add proper error handling for the case where transaction extension or restart fails, and reduces following changes needed for proper revoke record reservation tracking. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-10-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-11-05ext4: Fix ext4_should_journal_data() for EA inodesJan Kara
Similarly to directories, EA inodes do only journalled modifications to their data. Change ext4_should_journal_data() to return true for them so that we don't have to special-case them during truncate. Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-7-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-06-20ext4: use jbd2_inode dirty range scopingRoss Zwisler
Use the newly introduced jbd2_inode dirty range scoping to prevent us from waiting forever when trying to complete a journal transaction. Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
2019-03-24Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for 5.1" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: prohibit fstrim in norecovery mode ext4: cleanup bh release code in ext4_ind_remove_space() ext4: brelse all indirect buffer in ext4_ind_remove_space() ext4: report real fs size after failed resize ext4: add missing brelse() in add_new_gdb_meta_bg() ext4: remove useless ext4_pin_inode() ext4: avoid panic during forced reboot ext4: fix data corruption caused by unaligned direct AIO ext4: fix NULL pointer dereference while journal is aborted
2019-03-14ext4: fix NULL pointer dereference while journal is abortedJiufei Xue
We see the following NULL pointer dereference while running xfstests generic/475: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 8000000c84bad067 P4D 8000000c84bad067 PUD c84e62067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 9886 Comm: fsstress Kdump: loaded Not tainted 5.0.0-rc8 #10 RIP: 0010:ext4_do_update_inode+0x4ec/0x760 ... Call Trace: ? jbd2_journal_get_write_access+0x42/0x50 ? __ext4_journal_get_write_access+0x2c/0x70 ? ext4_truncate+0x186/0x3f0 ext4_mark_iloc_dirty+0x61/0x80 ext4_mark_inode_dirty+0x62/0x1b0 ext4_truncate+0x186/0x3f0 ? unmap_mapping_pages+0x56/0x100 ext4_setattr+0x817/0x8b0 notify_change+0x1df/0x430 do_truncate+0x5e/0x90 ? generic_permission+0x12b/0x1a0 This is triggered because the NULL pointer handle->h_transaction was dereferenced in function ext4_update_inode_fsync_trans(). I found that the h_transaction was set to NULL in jbd2__journal_restart but failed to attached to a new transaction while the journal is aborted. Fix this by checking the handle before updating the inode. Fixes: b436b9bef84d ("ext4: Wait for proper transaction commit on fsync") Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: stable@kernel.org
2019-01-23ext4: use IS_ENCRYPTED() to check encryption statusChandan Rajendra
This commit removes the ext4 specific ext4_encrypted_inode() and makes use of the generic IS_ENCRYPTED() macro to check for the encryption status of an inode. Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com>
2017-12-17ext4: fix up remaining files with SPDX cleanupsTheodore Ts'o
A number of ext4 source files were skipped due because their copyright permission statements didn't match the expected text used by the automated conversion utilities. I've added SPDX tags for the rest. While looking at some of these files, I've noticed that we have quite a bit of variation on the licenses that were used --- in particular some of the Red Hat licenses on the jbd2 files use a GPL2+ license, and we have some files that have a LGPL-2.1 license (which was quite surprising). I've not attempted to do any license changes. Even if it is perfectly legal to relicense to GPL 2.0-only for consistency's sake, that should be done with ext4 developer community discussion. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-08-06ext4, project: expand inode extra size if possibleMiao Xie
When upgrading from old format, try to set project id to old file first time, it will return EOVERFLOW, but if that file is dirtied(touch etc), changing project id will be allowed, this might be confusing for users, we could try to expand @i_extra_isize here too. Reported-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Miao Xie <miaoxie@huawei.com> Signed-off-by: Wang Shilong <wshilong@ddn.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-06-21ext4: improve journal credit handling in set xattr pathsTahsin Erdogan
Both ext4_set_acl() and ext4_set_context() need to be made aware of ea_inode feature when it comes to credits calculation. Also add a sufficient credits check in ext4_xattr_set_handle() right after xattr write lock is grabbed. Original credits calculation is done outside the lock so there is a possiblity that the initially calculated credits are not sufficient anymore. Signed-off-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-06-21ext4: add largedir featureArtem Blagodarenko
This INCOMPAT_LARGEDIR feature allows larger directories to be created in ldiskfs, both with directory sizes over 2GB and and a maximum htree depth of 3 instead of the current limit of 2. These features are needed in order to exceed the current limit of approximately 10M entries in a single directory. This patch was originally written by Yang Sheng to support the Lustre server. [ Bumped the credits needed to update an indexed directory -- tytso ] Signed-off-by: Liang Zhen <liang.zhen@intel.com> Signed-off-by: Yang Sheng <yang.sheng@intel.com> Signed-off-by: Artem Blagodarenko <artem.blagodarenko@seagate.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
2016-12-10ext4: do not perform data journaling when data is encryptedSergey Karamov
Currently data journalling is incompatible with encryption: enabling both at the same time has never been supported by design, and would result in unpredictable behavior. However, users are not precluded from turning on both features simultaneously. This change programmatically replaces data journaling for encrypted regular files with ordered data journaling mode. Background: Journaling encrypted data has not been supported because it operates on buffer heads of the page in the page cache. Namely, when the commit happens, which could be up to five seconds after caching, the commit thread uses the buffer heads attached to the page to copy the contents of the page to the journal. With encryption, it would have been required to keep the bounce buffer with ciphertext for up to the aforementioned five seconds, since the page cache can only hold plaintext and could not be used for journaling. Alternatively, it would be required to setup the journal to initiate a callback at the commit time to perform deferred encryption - in this case, not only would the data have to be written twice, but it would also have to be encrypted twice. This level of complexity was not justified for a mode that in practice is very rarely used because of the overhead from the data journalling. Solution: If data=journaled has been set as a mount option for a filesystem, or if journaling is enabled on a regular file, do not perform journaling if the file is also encrypted, instead fall back to the data=ordered mode for the file. Rationale: The intent is to allow seamless and proper filesystem operation when journaling and encryption have both been enabled, and have these two conflicting features gracefully resolved by the filesystem. Fixes: 4461471107b7 Signed-off-by: Sergey Karamov <skaramov@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2016-06-26ext4: optimize ext4_should_retry_alloc() to improve ENOSPC performanceTheodore Ts'o
If there are no pending blocks to be released after a commit, forcing a journal commit has no hope of helping. It's possible that a commit had just completed, so if there are now free blocks available for allocation, it's worth retrying the commit. Reported-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-24ext4: do not ask jbd2 to write data for delalloc buffersJan Kara
Currently we ask jbd2 to write all dirty allocated buffers before committing a transaction when doing writeback of delay allocated blocks. However this is unnecessary since we move all pages to writeback state before dropping a transaction handle and then submit all the necessary IO. We still need the transaction commit to wait for all the outstanding writeback before flushing disk caches during transaction commit to avoid data exposure issues though. Use the new jbd2 capability and ask it to only wait for outstanding writeback during transaction commit when writing back data in ext4_writepages(). Tested-by: "HUANG Weller (CM/ESW12-CN)" <Weller.Huang@cn.bosch.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-24jbd2: add support for avoiding data writes during transaction commitsJan Kara
Currently when filesystem needs to make sure data is on permanent storage before committing a transaction it adds inode to transaction's inode list. During transaction commit, jbd2 writes back all dirty buffers that have allocated underlying blocks and waits for the IO to finish. However when doing writeback for delayed allocated data, we allocate blocks and immediately submit the data. Thus asking jbd2 to write dirty pages just unnecessarily adds more work to jbd2 possibly writing back other redirtied blocks. Add support to jbd2 to allow filesystem to ask jbd2 to only wait for outstanding data writes before committing a transaction and thus avoid unnecessary writes. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2015-10-17ext4: clean up feature test macros with predicate functionsDarrick J. Wong
Create separate predicate functions to test/set/clear feature flags, thereby replacing the wordy old macros. Furthermore, clean out the places where we open-coded feature tests. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2014-09-11ext4: don't use MAXQUOTAS valueJan Kara
MAXQUOTAS value defines maximum number of quota types VFS supports. This isn't necessarily the number of types ext4 supports. Although ext4 will support project quotas, use ext4 private definition for consistency with other filesystems. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2014-05-12ext4: make local functions staticStephen Hemminger
I have been running make namespacecheck to look for unneeded globals, and found these in ext4. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-08-28ext4: Fix misspellings using 'codespell' toolAnatol Pomozov
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04ext4: use transaction reservation for extent conversion in ext4_end_ioJan Kara
Later we would like to clear PageWriteback bit only after extent conversion from unwritten to written extents is performed. However it is not possible to start a transaction after PageWriteback is set because that violates lock ordering (and is easy to deadlock). So we have to reserve a transaction before locking pages and sending them for IO and later we use the transaction for extent conversion from ext4_end_io(). Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-06-04ext4: provide wrappers for transaction reservation callsJan Kara
Reviewed-by: Zheng Liu <wenqing.lz@taobao.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-09ext4: improve credit estimate for EXT4_SINGLEDATA_TRANS_BLOCKSJan Kara
Estimate of 27 credits for allocation of a block in extent based inode is unnecessarily high. We can easily argue 20 is enough. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-03ext4: fix journal callback list traversalDmitry Monakhov
It is incorrect to use list_for_each_entry_safe() for journal callback traversial because ->next may be removed by other task: ->ext4_mb_free_metadata() ->ext4_mb_free_metadata() ->ext4_journal_callback_del() This results in the following issue: WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250() Hardware name: list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod Pid: 16400, comm: jbd2/dm-1-8 Tainted: G W 3.8.0-rc3+ #107 Call Trace: [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80 [<ffffffff810ac6be>] kthread+0x10e/0x120 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70 This patch fix the issue as follows: - ext4_journal_commit_callback() make list truly traversial safe simply by always starting from list_head - fix race between two ext4_journal_callback_del() and ext4_journal_callback_try_del() Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Cc: stable@vger.kernel.com
2013-02-09ext4: fix the number of credits needed for acl ops with inline dataTheodore Ts'o
Operations which modify extended attributes may need extra journal credits if inline data is used, since there is a chance that some extended attributes may need to get pushed to an external attribute block. Changes to reflect this was made in xattr.c, but they were missed in fs/ext4/acl.c. To fix this, abstract the calculation of the number of credits needed for xattr operations to an inline function defined in ext4_jbd2.h, and use it in acl.c and xattr.c. Also move the function declarations used in inline.c from xattr.h (where they are non-obviously hidden, and caused problems since ext4_jbd2.h needs to use the function ext4_has_inline_data), and move them to ext4.h. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Tao Ma <boyu.mt@taobao.com> Reviewed-by: Jan Kara <jack@suse.cz>
2013-02-09ext4: fix the number of credits needed for ext4_unlink() and ext4_rmdir()Theodore Ts'o
The ext4_unlink() and ext4_rmdir() don't actually release the blocks associated with the file/directory. This gets done in a separate jbd2 handle called via ext4_evict_inode(). Thus, we don't need to reserve lots of journal credits for the truncate. Note that using too many journal credits is non-optimal because it can leading to the journal transmit getting closed too early, before it is strictly necessary. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2013-02-08ext4: pass context information to jbd2__journal_start()Theodore Ts'o
So we can better understand what bits of ext4 are responsible for long-running jbd2 handles, use jbd2__journal_start() so we can pass context information for logging purposes. The recommended way for finding the longer-running handles is: T=/sys/kernel/debug/tracing EVENT=$T/events/jbd2/jbd2_handle_stats echo "interval > 5" > $EVENT/filter echo 1 > $EVENT/enable ./run-my-fs-benchmark cat $T/trace > /tmp/problem-handles This will list handles that were active for longer than 20ms. Having longer-running handles is bad, because a commit started at the wrong time could stall for those 20+ milliseconds, which could delay an fsync() or an O_SYNC operation. Here is an example line from the trace file describing a handle which lived on for 311 jiffies, or over 1.2 seconds: postmark-2917 [000] .... 196.435786: jbd2_handle_stats: dev 254,32 tid 570 type 2 line_no 2541 interval 311 sync 0 requested_blocks 1 dirtied_blocks 0 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-11-08ext4: remove ext4_handle_release_buffer()Eric Sandeen
ext4_handle_release_buffer() was intended to remove journal write access from a buffer, but it doesn't actually do anything at all other than add a BUFFER_TRACE point, but it's not reliably used for that either. Remove all the associated dead code. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2012-07-22ext4: remove unnecessary argument from __ext4_handle_dirty_metadata()Artem Bityutskiy
The '__ext4_handle_dirty_metadata()' does not need the 'now' argument anymore and we can kill it. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz>
2012-07-22ext4: make quota as first class supported featureAditya Kali
This patch adds support for quotas as a first class feature in ext4; which is to say, the quota files are stored in hidden inodes as file system metadata, instead of as separate files visible in the file system directory hierarchy. It is based on the proposal at: https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4 This patch introduces a new feature - EXT4_FEATURE_RO_COMPAT_QUOTA which, when turned on, enables quota accounting at mount time iteself. Also, the quota inodes are stored in two additional superblock fields. Some changes introduced by this patch that should be pointed out are: 1) Two new ext4-superblock fields - s_usr_quota_inum and s_grp_quota_inum for storing the quota inodes in use. 2) Default quota inodes are: inode#3 for tracking userquota and inode#4 for tracking group quota. The superblock fields can be set to use other inodes as well. 3) If the QUOTA feature and corresponding quota inodes are set in superblock, the quota usage tracking is turned on at mount time. On 'quotaon' ioctl, the quota limits enforcement is turned on. 'quotaoff' ioctl turns off only the limits enforcement in this case. 4) When QUOTA feature is in use, the quota mount options 'quota', 'usrquota', 'grpquota' are ignored by the kernel. 5) mke2fs or tune2fs can be used to set the QUOTA feature and initialize quota inodes. The default reserved inodes will not be visible to user as regular files. 6) The quota-tools will need to be modified to support hidden quota files on ext4. E2fsprogs will also include support for creating and fixing quota files. 7) Support is only for the new V2 quota file format. Tested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johann Lombardi <johann@whamcloud.com> Signed-off-by: Aditya Kali <adityakali@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-04-29ext4: calculate and verify superblock checksumDarrick J. Wong
Calculate and verify the superblock checksum. Since the UUID and block group number are embedded in each copy of the superblock, we need only checksum the entire block. Refactor some of the code to eliminate open-coding of the checksum update call. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-20ext4: expand commit callback andBobi Jam
The per-commit callback was used by mballoc code to manage free space bitmaps after deleted blocks have been released. This patch expands it to support multiple different callbacks, to allow other things to be done after the commit has been completed. Signed-off-by: Bobi Jam <bobijam@whamcloud.com> Signed-off-by: Andreas Dilger <adilger@whamcloud.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2012-02-20ext4: ignore EXT4_INODE_JOURNAL_DATA flag with delallocLukas Czerner
Ext4 does not support data journalling with delayed allocation enabled. We even do not allow to mount the file system with delayed allocation and data journalling enabled, however it can be set via FS_IOC_SETFLAGS so we can hit the inode with EXT4_INODE_JOURNAL_DATA set even on file system mounted with delayed allocation (default) and that's where problem arises. The easies way to reproduce this problem is with the following set of commands: mkfs.ext4 /dev/sdd mount /dev/sdd /mnt/test1 dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 chattr +j /mnt/test1/file dd if=/dev/zero of=/mnt/test1/file bs=1M count=4 conv=notrunc chattr -j /mnt/test1/file Additionally it can be reproduced quite reliably with xfstests 272 and 269. In fact the above reproducer is a part of test 272. To fix this we should ignore the EXT4_INODE_JOURNAL_DATA inode flag if the file system is mounted with delayed allocation. This can be easily done by fixing ext4_should_*_data() functions do ignore data journal flag when delalloc is set (suggested by Ted). We also have to set the appropriate address space operations for the inode (again, ignoring data journal flag if delalloc enabled). Additionally this commit introduces ext4_inode_journal_mode() function because ext4_should_*_data() has already had a lot of common code and this change is putting it all into one function so it is easier to read. Successfully tested with xfstests in following configurations: delalloc + data=ordered delalloc + data=writeback data=journal nodelalloc + data=ordered nodelalloc + data=writeback nodelalloc + data=journal Signed-off-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2011-08-13ext4: Fix ext4_should_writeback_data() for no-journal modeCurt Wohlgemuth
ext4_should_writeback_data() had an incorrect sequence of tests to determine if it should return 0 or 1: in particular, even in no-journal mode, 0 was being returned for a non-regular-file inode. This meant that, in non-journal mode, we would use ext4_journalled_aops for directories, symlinks, and other non-regular files. However, calling journalled aop callbacks when there is no valid handle, can cause problems. This would cause a kernel crash with Jan Kara's commit 2d859db3e4 ("ext4: fix data corruption in inodes with journalled data"), because we now dereference 'handle' in ext4_journalled_write_end(). I also added BUG_ONs to check for a valid handle in the obviously journal-only aops callbacks. I tested this running xfstests with a scratch device in these modes: - no-journal - data=ordered - data=writeback - data=journal All work fine; the data=journal run has many failures and a crash in xfstests 074, but this is no different from a vanilla kernel. Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2011-05-09ext4: remove unneeded ext4_journal_get_undo_accessTheodore Ts'o
The block allocation code used to use jbd2_journal_get_undo_access as a way to make changes that wouldn't show up until the commit took place. The new multi-block allocation code has a its own way of preventing newly freed blocks from getting reused until the commit takes place (it avoids updating the buddy bitmaps until the commit is done), so we don't need to use jbd2_journal_get_undo_access(), which has extra overhead compared to jbd2_journal_get_write_access(). There was one last vestigal use of ext4_journal_get_undo_access() in ext4_add_groupblocks(); change it to use ext4_journal_get_write_access() and then remove the ext4_journal_get_undo_access() support. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-04-04ext4: remove unnecessary [cm]time update of quota fileJan Kara
It is not necessary to update [cm]time of quota file on each quota file write and it wastes journal space and IO throughput with inode writes. So just remove the updating from ext4_quota_write() and only update times when quotas are being turned off. Userspace cannot get anything reliable from quota files while they are used by the kernel anyway. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-03-20ext4: unify the ext4_handle_release_buffer() apiAmir Goldstein
There are two wrapper functions which do exactly the same thing: ext4_journal_release_buffer(), and ext4_handle_release_buffer(). In addition, ext4_xattr_block_set() calls jbd2_journal_release_buffer() directly. Unify all of the code to use ext4_handle_release_buffer(), and get rid of ext4_journal_release_buffer(). Signed-off-by: Amir Goldstein <amir73il@users.sf.net> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2011-01-10ext4: dynamically allocate the jbd2_inode in ext4_inode_info as necessaryTheodore Ts'o
Replace the jbd2_inode structure (which is 48 bytes) with a pointer and only allocate the jbd2_inode when it is needed --- that is, when the file system has a journal present and the inode has been opened for writing. This allows us to further slim down the ext4_inode_info structure. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-07-27ext4: Pass line numbers to ext4_error() and friendsTheodore Ts'o
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-29ext4: Pass line number to ext4_journal_abort_handle()Theodore Ts'o
This allows the error messages to include the line number Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-14ext4: remove vestiges of nobh supportChristoph Hellwig
The nobh option was only supported for writeback mode, but given that all write paths actually create buffer heads it effectively was a no-op already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-06-11ext4: Clean up s_dirt handlingTheodore Ts'o
We don't need to set s_dirt in most of the ext4 code when journaling is enabled. In ext3/4 some of the summary statistics for # of free inodes, blocks, and directories are calculated from the per-block group statistics when the file system is mounted or unmounted. As a result the superblock doesn't have to be updated, either via the journal or by setting s_dirt. There are a few exceptions, most notably when resizing the file system, where the superblock needs to be modified --- and in that case it should be done as a journalled operation if possible, and s_dirt set only in no-journal mode. This patch will optimize out some unneeded disk writes when using ext4 with a journal. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-05-16ext4: Use bitops to read/modify i_flags in struct ext4_inode_infoDmitry Monakhov
At several places we modify EXT4_I(inode)->i_flags without holding i_mutex (ext4_do_update_inode, ...). These modifications are racy and we can lose updates to i_flags. So convert handling of i_flags to use bitops which are atomic. https://bugzilla.kernel.org/show_bug.cgi?id=15792 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>