summaryrefslogtreecommitdiff
path: root/fs/fuse/dir.c
AgeCommit message (Collapse)Author
2009-06-30fuse: invalidation reverse callsJohn Muir
Add notification messages that allow the filesystem to invalidate VFS caches. Two notifications are added: 1) inode invalidation - invalidate cached attributes - invalidate a range of pages in the page cache (this is optional) 2) dentry invalidation - try to invalidate a subtree in the dentry cache Care must be taken while accessing the 'struct super_block' for the mount, as it can go away while an invalidation is in progress. To prevent this, introduce a rw-semaphore, that is taken for read during the invalidation and taken for write in the ->kill_sb callback. Cc: Csaba Henk <csaba@gluster.com> Cc: Anand Avati <avati@zresearch.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-06-30fuse: allow umask processing in userspaceMiklos Szeredi
This patch lets filesystems handle masking the file mode on creation. This is needed if filesystem is using ACLs. - The CREATE, MKDIR and MKNOD requests are extended with a "umask" parameter. - A new FUSE_DONT_MASK flag is added to the INIT request/reply. With this the filesystem may request that the create mode is not masked. CC: Jean-Pierre André <jean-pierre.andre@wanadoo.fr> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: don't use inode in fuse_sync_release()Miklos Szeredi
Make fuse_sync_release() a generic helper function that doesn't need a struct inode pointer. This makes it suitable for use by CUSE. Change return value of fuse_release_common() from int to void. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: create fuse_do_open() helper for CUSEMiklos Szeredi
Create a helper for sending an OPEN request that doesn't need a struct inode pointer. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: clean up args in fuse_finish_open() and fuse_release_fill()Miklos Szeredi
Move setting ff->fh, ff->nodeid and file->private_data outside fuse_finish_open(). Add ->open_flags member to struct fuse_file. This simplifies the argument passing to fuse_finish_open() and fuse_release_fill(), and paves the way for creating an open helper that doesn't need an inode pointer. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-28fuse: don't use inode in helpers called by fuse_direct_io()Miklos Szeredi
Use ff->fc and ff->nodeid instead of passing down the inode. This prepares this function for use by CUSE, where the inode is not owned by a fuse filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-04-02fuse: allow kernel to access "direct_io" filesMiklos Szeredi
Allow the kernel read and write on "direct_io" files. This is necessary for nfs export and execute support. The implementation is simple: if an access from the kernel is detected, don't perform get_user_pages(), just use the kernel address provided by the requester to copy from/to the userspace filesystem. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-03-27constify dentry_operations: FUSEAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: clean up annotations of fc->lock fuse: fix sparse warning in ioctl fuse: update interface version fuse: add fuse_conn->release() fuse: separate out fuse_conn_init() from new_conn() fuse: add fuse_ prefix to several functions fuse: implement poll support fuse: implement unsolicited notification fuse: add file kernel handle fuse: implement ioctl support fuse: don't let fuse_req->end() put the base reference fuse: move FUSE_MINOR to miscdevice.h fuse: style fixes
2008-11-26fuse: add fuse_ prefix to several functionsTejun Heo
Add fuse_ prefix to request_send*() and get_root_inode() as some of those functions will be exported for CUSE. With or without CUSE export, having the function names scoped is a good idea for debuggability. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26fuse: add file kernel handleTejun Heo
The file handle, fuse_file->fh, is opaque value supplied by userland FUSE server and uniqueness is not guaranteed. Add file kernel handle, fuse_file->kh, which is allocated by the kernel on file allocation and guaranteed to be unique. This will be used by poll to match notification to the respective file but can be used for other purposes where unique file handle is necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-26fuse: style fixesMiklos Szeredi
Fix coding style errors reported by checkpatch and others. Uptdate copyright date to 2008. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-11-14CRED: Use RCU to access another task's creds and to release a task's own credsDavid Howells
Use RCU to access another task's creds and to release a task's own creds. This means that it will be possible for the credentials of a task to be replaced without another task (a) requiring a full lock to read them, and (b) seeing deallocated memory. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Separate task security context from task_structDavid Howells
Separate the task security context from task_struct. At this point, the security data is temporarily embedded in the task_struct with two pointers pointing to it. Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in entry.S via asm-offsets. With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-07-26[PATCH] fix MAY_CHDIR/MAY_ACCESS/LOOKUP_ACCESS messAl Viro
* MAY_CHDIR is redundant - it's an equivalent of MAY_ACCESS * MAY_ACCESS on fuse should affect only the last step of pathname resolution * fchdir() and chroot() should pass MAY_ACCESS, for the same reason why chdir() needs that. * now that we pass MAY_ACCESS explicitly in all cases, LOOKUP_ACCESS can be removed; it has no business being in nameidata. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-26[PATCH] sanitize ->permission() prototypeAl Viro
* kill nameidata * argument; map the 3 bits in ->flags anybody cares about to new MAY_... ones and pass with the mask. * kill redundant gfs2_iop_permission() * sanitize ecryptfs_permission() * fix remaining places where ->permission() instances might barf on new MAY_... found in mask. The obvious next target in that direction is permission(9) folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-07-25fuse: add fuse_lookup_name() helperMiklos Szeredi
Add a new helper function which sends a LOOKUP request with the supplied name. This will be used by the next patch to send special LOOKUP requests with "." and ".." as the name. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fuse: add export operationsMiklos Szeredi
Implement export_operations, to allow fuse filesystems to be exported to NFS. This feature has been in the out-of-tree fuse module, and is widely used and tested. It has not been originally merged into mainline, because doing the NFS export in userspace was thought to be a cleaner and more efficient way of doing it, than through the kernel. While that is true, it would also have involved a lot of duplicated effort at reimplementing NFS exporting (all the different versions of the protocol). This effort was unfortunately not undertaken by anyone, so we are left with doing it the easy but less efficient way. If this feature goes in, the out-of-tree fuse module can go away, which would have several advantages: - not having to maintain two versions - less confusion for users - no bugs due to kernel API changes Comment from hch: - Use the same fh_type values as XFS, since we use the same fh encoding. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25fuse: prepare lookup for nfs exportMiklos Szeredi
Use d_splice_alias() instead of d_add() in fuse lookup code, to allow NFS exporting. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30fuse: update file size on short readMiklos Szeredi
If the READ request returned a short count, then either - cached size is incorrect - filesystem is buggy, as short reads are only allowed on EOF So assume that the size is wrong and refresh it, so that cached read() doesn't zero fill the missing chunk. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30fuse: support writable mmapMiklos Szeredi
Quoting Linus (3 years ago, FUSE inclusion discussions): "User-space filesystems are hard to get right. I'd claim that they are almost impossible, unless you limit them somehow (shared writable mappings are the nastiest part - if you don't have those, you can reasonably limit your problems by limiting the number of dirty pages you accept through normal "write()" calls)." Instead of attempting the impossible, I've just waited for the dirty page accounting infrastructure to materialize (thanks to Peter Zijlstra and others). This nicely solved the biggest problem: limiting the number of pages used for write caching. Some small details remained, however, which this largish patch attempts to address. It provides a page writeback implementation for fuse, which is completely safe against VM related deadlocks. Performance may not be very good for certain usage patterns, but generally it should be acceptable. It has been tested extensively with fsx-linux and bash-shared-mapping. Fuse page writeback design -------------------------- fuse_writepage() allocates a new temporary page with GFP_NOFS|__GFP_HIGHMEM. It copies the contents of the original page, and queues a WRITE request to the userspace filesystem using this temp page. The writeback is finished instantly from the MM's point of view: the page is removed from the radix trees, and the PageDirty and PageWriteback flags are cleared. For the duration of the actual write, the NR_WRITEBACK_TEMP counter is incremented. The per-bdi writeback count is not decremented until the actual write completes. On dirtying the page, fuse waits for a previous write to finish before proceeding. This makes sure, there can only be one temporary page used at a time for one cached page. This approach is wasteful in both memory and CPU bandwidth, so why is this complication needed? The basic problem is that there can be no guarantee about the time in which the userspace filesystem will complete a write. It may be buggy or even malicious, and fail to complete WRITE requests. We don't want unrelated parts of the system to grind to a halt in such cases. Also a filesystem may need additional resources (particularly memory) to complete a WRITE request. There's a great danger of a deadlock if that allocation may wait for the writepage to finish. Currently there are several cases where the kernel can block on page writeback: - allocation order is larger than PAGE_ALLOC_COSTLY_ORDER - page migration - throttle_vm_writeout (through NR_WRITEBACK) - sync(2) Of course in some cases (fsync, msync) we explicitly want to allow blocking. So for these cases new code has to be added to fuse, since the VM is not tracking writeback pages for us any more. As an extra safetly measure, the maximum dirty ratio allocated to a single fuse filesystem is set to 1% by default. This way one (or several) buggy or malicious fuse filesystems cannot slow down the rest of the system by hogging dirty memory. With appropriate privileges, this limit can be raised through '/sys/class/bdi/<bdi>/max_ratio'. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23fuse: fix permission checkingMiklos Szeredi
I added a nasty local variable shadowing bug to fuse in 2.6.24, with the result, that the 'default_permissions' mount option is basically ignored. How did this happen? - old err declaration in inner scope - new err getting declared in outer scope - 'return err' from inner scope getting removed - old declaration not being noticed -Wshadow would have saved us, but it doesn't seem practical for the kernel :( More testing would have also saved us :(( Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p)David Howells
Convert instances of ERR_PTR(PTR_ERR(p)) to ERR_CAST(p) using: perl -spi -e 's/ERR_PTR[(]PTR_ERR[(](.*)[)][)]/ERR_CAST(\1)/' `grep -rl 'ERR_PTR[(]*PTR_ERR' fs crypto net security` Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fuse: fix attribute caching after createMiklos Szeredi
Invalidate attributes on create, since st_ctime is updated. Reported by Szabolcs Szakacsits. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix attribute caching after renameMiklos Szeredi
Invalidate attributes on rename, since some filesystems may update st_ctime. Reported by Szabolcs Szakacsits Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: pass open flags to read and writeMiklos Szeredi
Some open flags (O_APPEND, O_DIRECT) can be changed with fcntl(F_SETFL, ...) after open, but fuse currently only sends the flags to userspace in open. To make it possible to correcly handle changing flags, send the current value to userspace in each read and write. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: cleanup: add fuse_get_attr_version()Miklos Szeredi
Extract repeated code into helper function, as suggested by Akpm. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29fuse: fix reading past EOFMiklos Szeredi
Currently reading a fuse file will stop at cached i_size and return EOF, even though the file might have grown since the attributes were last updated. So detect if trying to read past EOF, and refresh the attributes before continuing with the read. Thanks to mpb for the report. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add blksize field to fuse_attrMiklos Szeredi
There are cases when the filesystem will be passed the buffer from a single read or write call, namely: 1) in 'direct-io' mode (not O_DIRECT), read/write requests don't go through the page cache, but go directly to the userspace fs 2) currently buffered writes are done with single page requests, but if Nick's ->perform_write() patch goes it, it will be possible to do larger write requests. But only if the original write() was also bigger than a page. In these cases the filesystem might want to give a hint to the app about the optimal I/O size. Allow the userspace filesystem to supply a blksize value to be returned by stat() and friends. If the field is zero, it defaults to the old PAGE_CACHE_SIZE value. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add support for mandatory lockingMiklos Szeredi
For mandatory locking the userspace filesystem needs to know the lock ownership for read, write and truncate operations. This patch adds the necessary fields to the protocol. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add atomic open+truncate supportMiklos Szeredi
This patch allows fuse filesystems to implement open(..., O_TRUNC) as a single request, instead of separate truncate and open requests. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: improve utimes supportMiklos Szeredi
Add two new flags for setattr: FATTR_ATIME_NOW and FATTR_MTIME_NOW. These mean, that atime or mtime should be changed to the current time. Also it is now possible to update atime or mtime individually, not just together. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: clean up open file passing in setattrMiklos Szeredi
Clean up supplying open file to the setattr operation. In addition to being a cleanup it prepares for the changes in the way the open file is passed to the setattr method. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: add file handle to getattr operationMiklos Szeredi
Add necessary protocol changes for supplying a file handle with the getattr operation. Step the API version to 7.9. This patch doesn't actually supply the file handle, because that needs some kind of VFS support, which we haven't yet been able to agree upon. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: fix race between getattr and writeMiklos Szeredi
Getattr and lookup operations can be running in parallel to attribute changing operations, such as write and setattr. This means, that if for example getattr was slower than a write, the cached size attribute could be set to a stale value. To prevent this race, introduce a per-filesystem attribute version counter. This counter is incremented whenever cached attributes are modified, and the incremented value stored in the inode. Before storing new attributes in the cache, getattr and lookup check, using the version number, whether the attributes have been modified during the request's lifetime. If so, the returned attributes are not cached, because they might be stale. Thanks to Jakub Bogusz for the bug report and test program. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Jakub Bogusz <jakub.bogusz@gemius.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18fuse: fix allowing operationsMiklos Szeredi
The following operation didn't check if sending the request was allowed: setattr listxattr statfs Some other operations don't explicitly do the check, but VFS calls ->permission() which checks this. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: clean up execute permission checkingMiklos Szeredi
Define a new function fuse_refresh_attributes() that conditionally refreshes the attributes based on the validity timeout. In fuse_permission() only refresh the attributes for checking the execute bits if necessary. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: fix permission checking on sticky directoriesMiklos Szeredi
The VFS checks sticky bits on the parent directory even if the filesystem defines it's own ->permission(). In some situations (sshfs, mountlo, etc) the user does have permission to delete a file even if the attribute based checking would not allow it. So work around this by storing the permission bits separately and returning them in stat(), but cutting the permission bits off from inode->i_mode. This is slightly hackish, but it's probably not worth it to add new infrastructure in VFS and a slight performance penalty for all filesystems, just for the sake of fuse. [Jan Engelhardt] cosmetic fixes Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: refresh stale attributes in fuse_permission()Miklos Szeredi
fuse_permission() didn't refresh inode attributes before using them, even if the validity has already expired. Thanks to Junjiro Okajima for spotting this. Also remove some old code to unconditionally refresh the attributes on the root inode. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: truncate on spontaneous size changeMiklos Szeredi
Memory mappings were only truncated on an explicit truncate, but not when the file size was changed externally. Fix this by moving the truncation code from fuse_setattr to fuse_change_attributes. Yes, there are races between write and and external truncation, but we can't really do anything about them. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17fuse: add reference counting to fuse_fileMiklos Szeredi
Make lifetime of 'struct fuse_file' independent from 'struct file' by adding a reference counter and destructor. This will enable asynchronous page writeback, where it cannot be guaranteed, that the file is not released while a request with this file handle is being served. The actual RELEASE request is only sent when there are no more references to the fuse_file. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-23fuse: fix mknod of regular fileMiklos Szeredi
The wrong lookup flag was tested in ->create() causing havoc (error or Oops) when a regular file was created with mknod() in a fuse filesystem. Thanks to J. Cameijo Cerdeira for the report. Kernels 2.6.18 onward are affected. Please apply to -stable as well. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-08[PATCH] fuse: validate rootmode mount optionTimo Savola
If rootmode isn't valid, we hit the BUG() in fuse_init_inode. Now EINVAL is returned. Signed-off-by: Timo Savola <tsavola@movial.fi> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] mark struct inode_operations const 1Arjan van de Ven
Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-12-08[PATCH] struct path: convert fuseJosef Sipek
Signed-off-by: Josef Sipek <jsipek@fsl.cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] fuse: add bmap supportMiklos Szeredi
Add support for the BMAP operation for block device based filesystems. This is needed to support swap-files and lilo. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] fuse: minor cleanup in fuse_dentry_revalidateMiklos Szeredi
Remove unneeded code from fuse_dentry_revalidate(). This made some sense while the validity time could wrap around, but now it's a very obvious no-op. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-25[PATCH] fuse: fix Oops in lookupMiklos Szeredi
Fix bug in certain error paths of lookup routines. The request object was reused for sending FORGET, which is illegal. This bug could cause an Oops in 2.6.18. In earlier versions it might silently corrupt memory, but this is very unlikely. These error paths are never triggered by libfuse, so this wasn't noticed even with the 2.6.18 kernel, only with a filesystem using the raw kernel interface. Thanks to Russ Cox for the bug report and test filesystem. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[PATCH] fuse: fix dereferencing dentry parentMiklos Szeredi
There's no locking for ->d_revalidate, so fuse_dentry_revalidate() should use dget_parent() instead of simply dereferencing ->d_parent. Due to topology changes in the directory tree the parent could become negative or be destroyed while being used. There hasn't been any reports about this yet. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[PATCH] fuse: fix handling of moved directoryMiklos Szeredi
Fuse considered it an error (EIO) if lookup returned a directory inode, to which a dentry already refered. This is because directory aliases are not allowed. But in a network filesystem this could happen legitimately, if a directory is moved on a remote client. This patch attempts to relax the restriction by trying to first evict the offending alias from the cache. If this fails, it still returns an error (EBUSY). A rarer situation is if an mkdir races with an indenpendent lookup, which finds the newly created directory already moved. In this situation the mkdir should return success, but that would be incorrect, since the dentry cannot be instantiated, so return EBUSY. Previously checking for a directory alias and instantiation of the dentry weren't done atomically in lookup/mkdir, hence two such calls racing with each other could create aliased directories. To prevent this introduce a new per-connection mutex: fuse_conn->inst_mutex, which is taken for instantiations with a directory inode. Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>