| Age | Commit message (Collapse) | Author |
|---|
|
If an application is using eventfd notifications with poll to know when
new SQEs can be issued, it's expecting the following read/writes to
complete inline. And with that, it knows that there are events available,
and don't want spurious wakeups on the eventfd for those requests.
This adds IORING_REGISTER_EVENTFD_ASYNC, which works just like
IORING_REGISTER_EVENTFD, except it only triggers notifications for events
that happen from async completions (IRQ, or io-wq worker completions).
Any completions inline from the submission itself will not trigger
notifications.
Suggested-by: Mark Papadakis <markuspapadakis@icloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for adding another one, which would make us spill into
another long (and hence bump the size of the ctx), change them to
bit fields.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If an application attempts to register a set with unbounded requests
pending, we can be stuck here forever if they don't complete. We can
make this wait interruptible, and just abort if we get signaled.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Null check kfree is redundant, so remove it.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds IORING_OP_SEND for send(2) support, and IORING_OP_RECV for
recv(2) support.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_wq workers use io_issue_sqe() to forward sqes and never
io_queue_sqe(). Remove extra check for io_wq_current_is_worker()
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It should be pretty rare to not submitting anything when there is
something in the ring. No need to keep heuristics for this case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A user may ask to submit more than there is in the ring, and then
io_uring will submit as much as it can. However, in the last iteration
it will allocate an io_kiocb and immediately free it. It could do
better and adjust @to_submit to what is in the ring.
And since the ring's head is already checked here, there is no need to
do it in the loop, spamming with smp_load_acquire()'s barriers
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make io_submit_sqes() to clamp @to_submit itself. It removes duplicated
code and prepares for following changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some applications like to start small in terms of ring size, and then
ramp up as needed. This is a bit tricky to do currently, since we don't
advertise the max ring size.
This adds IORING_SETUP_CLAMP. If set, and the values for SQ or CQ ring
size exceed what we support, then clamp them at the max values instead
of returning -EINVAL. Since we return the chosen ring sizes after setup,
no further changes are needed on the application side. io_uring already
changes the ring sizes if the application doesn't ask for power-of-two
sizes, for example.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently we only batch free if fixed files are used, no links, no aux
data, etc. This extends the batch freeing to only exclude the linked
case and fallback case, and make io_free_req_many() handle the other
cases just fine.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This cleans up the code a bit, and it allows us to build on top of the
multi-req freeing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
percpu_ref_tryget() has its own overhead. Instead getting a reference
for each request, grab a bunch once per io_submit_sqes().
~5% throughput boost for a "submit and wait 128 nops" benchmark.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
__io_req_free_empty() -> __io_req_do_free()
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds support for doing madvise(2) through io_uring. We assume that
any operation can block, and hence punt everything async. This could be
improved, but hard to make bullet proof. The async punt ensures it's
safe.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds support for doing fadvise through io_uring. We assume that
WILLNEED doesn't block, but that DONTNEED may block.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This behaves like preadv2/pwritev2 with offset == -1, it'll use (and
update) the current file position. This obviously comes with the caveat
that if the application has multiple read/writes in flight, then the
end result will not be as expected. This is similar to threads sharing
a file descriptor and doing IO using the current file position.
Since this feature isn't easily detectable by doing a read or write,
add a feature flags, IORING_FEAT_RW_CUR_POS, to allow applications to
detect presence of this feature.
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For uses cases that don't already naturally have an iovec, it's easier
(or more convenient) to just use a buffer address + length. This is
particular true if the use case is from languages that want to create
a memory safe abstraction on top of io_uring, and where introducing
the need for the iovec may impose an ownership issue. For those cases,
they currently need an indirection buffer, which means allocating data
just for this purpose.
Add basic read/write that don't require the iovec.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For busy IORING_OP_POLL_ADD workloads, we can have enough contention
on the completion lock that we fail the inline completion path quite
often as we fail the trylock on that lock. Add a list for deferred
completions that we can use in that case. This helps reduce the number
of async offloads we have to do, as if we get multiple completions in
a row, we'll piggy back on to the poll_llist instead of having to queue
our own offload.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently check ->cq_overflow_list from both SQ and CQ context, which
causes some bouncing of that cache line. Add separate bits of state for
this instead, so that the SQ side can check using its own state, and
likewise for the CQ side.
This adds ->sq_check_overflow with the SQ state, and ->cq_check_overflow
with the CQ state. If we hit an overflow condition, both of these bits
are set. Likewise for overflow flush clear, we clear both bits. For the
fast path of just checking if there's an overflow condition on either
the SQ or CQ side, we can use our own private bit for this.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently have various switch statements that check if an opcode needs
a file, mm, etc. These are hard to keep in sync as opcodes are added. Add
a struct io_op_def that holds all of this information, so we have just
one spot to update when opcodes are added.
This also enables us to NOT allocate req->io if a deferred command
doesn't need it, and corrects some mistakes we had in terms of what
commands need mm context.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
__io_free_req() and io_double_put_req() aren't used before they are
defined, so we can kill these two forwards.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move io_queue_link_head() to links handling code in io_submit_sqe(),
so it wouldn't need extra checks and would have better data locality.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Calling "prev" a head of a link is a bit misleading. Rename it
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring defaults to always doing inline submissions, if at all
possible. But for larger copies, even if the data is fully cached, that
can take a long time. Add an IOSQE_ASYNC flag that the application can
set on the SQE - if set, it'll ensure that we always go async for those
kinds of requests. Use the io-wq IO_WQ_WORK_CONCURRENT flag to ensure we
get the concurrency we desire for this case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This provides support for async statx(2) through io_uring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently fully quiesce the ring before an unregister or update of
the fixed fileset. This is very expensive, and we can be a bit smarter
about this.
Add a percpu refcount for the file tables as a whole. Grab a percpu ref
when we use a registered file, and put it on completion. This is cheap
to do. Upon removal of a file from a set, switch the ref count to atomic
mode. When we hit zero ref on the completion side, then we know we can
drop the previously registered files. When the old files have been
dropped, switch the ref back to percpu mode for normal operation.
Since there's a period between doing the update and the kernel being
done with it, add a IORING_OP_FILES_UPDATE opcode that can perform the
same action. The application knows the update has completed when it gets
the CQE for it. Between doing the update and receiving this completion,
the application must continue to use the unregistered fd if submitting
IO on this particular file.
This takes the runtime of test/file-register from liburing from 14s to
about 0.7s.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This works just like close(2), unsurprisingly. We remove the file
descriptor and post the completion inline, then offload the actual
(potential) last file put to async context.
Mark the async part of this work as uncancellable, as we really must
guarantee that the latter part of the close is run.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Not all work can be cancelled, some of it we may need to guarantee
that it runs to completion. Allow the caller to set IO_WQ_WORK_NO_CANCEL
on work that must not be cancelled. Note that the caller work function
must also check for IO_WQ_WORK_NO_CANCEL on work that is marked
IO_WQ_WORK_CANCEL.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This works just like openat(2), except it can be performed async. For
the normal case of a non-blocking path lookup this will complete
inline. If we have to do IO to perform the open, it'll be done from
async context.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This exposes fallocate(2) through io_uring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
fds field of struct io_uring_files_update is problematic with regards
to compat user space, as pointer size is different in 32-bit, 32-on-64-bit,
and 64-bit user space. In order to avoid custom handling of compat in
the syscall implementation, make fds __u64 and use u64_to_user_ptr in
order to retrieve it. Also, align the field naturally and check that
no garbage is passed there.
Fixes: c3a31e605620c279 ("io_uring: add support for IORING_REGISTER_FILES_UPDATE")
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the credentials or the mm doesn't match, don't allow the task to
submit anything on behalf of this ring. The task that owns the ring can
pass the file descriptor to another task, but we don't want to allow
that task to submit an SQE that then assumes the ring mm and creds if
it needs to go async.
Cc: stable@vger.kernel.org
Suggested-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A previous commit moved the locking for the async sqthread, but didn't
take into account that the io-wq workers still need it. We can't use
req->in_async for this anymore as both the sqthread and io-wq workers
set it, gate the need for locking on io_wq_current_is_worker() instead.
Fixes: 8a4955ff1cca ("io_uring: sqthread should grab ctx->uring_lock for submissions")
Reported-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
req->result is cleared when io_issue_sqe() calls io_read/write_pre()
routines. Those routines however are not called when the sqe
argument is NULL, which is the case when io_issue_sqe() is called from
io_wq_submit_work(). io_issue_sqe() may then examine a stale result if
a polled request had previously failed with -EAGAIN:
if (ctx->flags & IORING_SETUP_IOPOLL) {
if (req->result == -EAGAIN)
return -EAGAIN;
io_iopoll_req_issued(req);
}
and in turn cause a subsequently completed request to be re-issued in
io_wq_submit_work().
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we pass back dependent work in case of links, we need to always
ensure that we call the link setup and work prep handler. If not, we
might be missing some setup for the next work item.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We don't need it, and if we have it, then the retry handler will attempt
to copy the non-existent iovec with the inline iovec, with a segment
count that doesn't make sense.
Fixes: f67676d160c6 ("io_uring: ensure async punted read/write requests copy iovec")
Reported-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently punt any short read on a regular file to async context,
but this fails if the short read is due to running into EOF. This is
especially problematic since we only do the single prep for commands
now, as we don't reset kiocb->ki_pos. This can result in a 4k read on
a 1k file returning zero, as we detect the short read and then retry
from async context. At the time of retry, the position is now 1k, and
we end up reading nothing, and hence return 0.
Instead of trying to patch around the fact that short reads can be
legitimate and won't succeed in case of retry, remove the logic to punt
a short read to async context. Simply return it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This moves the prep handlers outside of the opcode handlers, and allows
us to pass in the sqe directly. If the sqe is non-NULL, it means that
the request should be prepared for the first time.
With the opcode handlers not having access to the sqe at all, we are
guaranteed that the prep handler has setup the request fully by the
time we get there. As before, for opcodes that need to copy in more
data then the io_kiocb allows for, the io_async_ctx holds that info. If
a prep handler is invoked with req->io set, it must use that to retain
information for later.
Finally, we can remove io_kiocb->sqe as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently have a mix of use cases. Most of the newer ones are pretty
uniform, but we have some older ones that use different calling
calling conventions. This is confusing.
For the opcodes that currently rely on the req->io->sqe copy saving
them from reuse, add a request type struct in the io_kiocb command
union to store the data they need.
Prepare for all opcodes having a standard prep method, so we can call
it in a uniform fashion and outside of the opcode handler. This is in
preparation for passing in the 'sqe' pointer, rather than storing it
in the io_kiocb. Once we have uniform prep handlers, we can leave all
the prep work to that part, and not even pass in the sqe to the opcode
handler. This ensures that we don't reuse sqe data inadvertently.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the count field to struct io_timeout, and ensure the prep handler
has read it. Timeout also needs an async context always, set it up
in the prep handler if we don't have one.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add struct io_sr_msg in our io_kiocb per-command union, and ensure that
the send/recvmsg prep handlers have grabbed what they need from the SQE
by the time prep is done.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add struct io_connect in our io_kiocb per-command union, and ensure
that io_connect_prep() has grabbed what it needs from the SQE.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Put the kiocb in struct io_rw, and add the addr/len for the request as
well. Use the kiocb->private field for the buffer index for fixed reads
and writes.
Any use of kiocb->ki_filp is flipped to req->file. It's the same thing,
and less confusing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We use it in some spots, but not consistently. Convert the rest over,
makes it easier to read as well.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
I've been chasing a weird and obscure crash that was userspace stack
corruption, and finally narrowed it down to a bit flip that made a
stack address invalid. io_wq_submit_work() unconditionally flips
the req->rw.ki_flags IOCB_NOWAIT bit, but since it's a generic work
handler, this isn't valid. Normal read/write operations own that
part of the request, on other types it could be something else.
Move the IOCB_NOWAIT clear to the read/write handlers where it belongs.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
There is no reliable way to submit and wait in a single syscall, as
io_submit_sqes() may under-consume sqes (in case of an early error).
Then it will wait for not-yet-submitted requests, deadlocking the user
in most cases.
Don't wait/poll if can't submit all sqes
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that we have all the opcodes handled in terms of command prep and
SQE reuse, add a printk_once() to warn about any potentially new and
unhandled ones.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we defer a request, we can't be reading the opcode again. Ensure that
the user_data and opcode fields are stable. For the user_data we already
have a place for it, for the opcode we can fill a one byte hold and store
that as well. For both of them, assign them when we originally read the
SQE in io_get_sqring(). Any code that uses sqe->opcode or sqe->user_data
is switched to req->opcode and req->user_data.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we defer this command as part of a link, we have to make sure that
the SQE data has been read upfront. Integrate the timeout remove op into
the prep handling to make it safe for SQE reuse.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we defer this command as part of a link, we have to make sure that
the SQE data has been read upfront. Integrate the async cancel op into
the prep handling to make it safe for SQE reuse.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
