| Age | Commit message (Collapse) | Author |
|---|
|
Pull block updates from Jens Axboe:
"Pretty quiet round for this release. This contains:
- Add support for zoned storage to ublk (Andreas, Ming)
- Series improving performance for drivers that mark themselves as
needing a blocking context for issue (Bart)
- Cleanup the flush logic (Chengming)
- sed opal keyring support (Greg)
- Fixes and improvements to the integrity support (Jinyoung)
- Add some exports for bcachefs that we can hopefully delete again in
the future (Kent)
- deadline throttling fix (Zhiguo)
- Series allowing building the kernel without buffer_head support
(Christoph)
- Sanitize the bio page adding flow (Christoph)
- Write back cache fixes (Christoph)
- MD updates via Song:
- Fix perf regression for raid0 large sequential writes (Jan)
- Fix split bio iostat for raid0 (David)
- Various raid1 fixes (Heinz, Xueshi)
- raid6test build fixes (WANG)
- Deprecate bitmap file support (Christoph)
- Fix deadlock with md sync thread (Yu)
- Refactor md io accounting (Yu)
- Various non-urgent fixes (Li, Yu, Jack)
- Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"
* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
block: use strscpy() to instead of strncpy()
block: sed-opal: keyring support for SED keys
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
block: sed-opal: Implement IOC_OPAL_DISCOVERY
blk-mq: prealloc tags when increase tagset nr_hw_queues
blk-mq: delete redundant tagset map update when fallback
blk-mq: fix tags leak when shrink nr_hw_queues
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
md: raid0: account for split bio in iostat accounting
md/raid0: Fix performance regression for large sequential writes
md/raid0: Factor out helper for mapping and submitting a bio
md raid1: allow writebehind to work on any leg device set WriteMostly
md/raid1: hold the barrier until handle_read_error() finishes
md/raid1: free the r1bio before waiting for blocked rdev
md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
drivers/rnbd: restore sysfs interface to rnbd-client
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
...
|
|
block_page_mkwrite_return is neither block nor mkwrite specific, and
should not be under CONFIG_BLOCK. Move it to mm.h and rename it to
vmf_fs_error.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230801172201.1923299-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
iomap-6.6-mergeA
Improve iomap/xfs async dio write performance
iomap always punts async dio write completions to a workqueue, which has
a cost in terms of efficiency (now you need an unrelated worker to
process it) and latency (now you're bouncing a completion through an
async worker, which is a classic slowdown scenario).
io_uring handles IRQ completions via task_work, and for writes that
don't need to do extra IO at completion time, we can safely complete
them inline from that. This patchset adds IOCB_DIO_CALLER_COMP, which an
IO issuer can set to inform the completion side that any extra work that
needs doing for that completion can be punted to a safe task context.
The iomap dio completion will happen in hard/soft irq context, and we
need a saner context to process these completions. IOCB_DIO_CALLER_COMP
is added, which can be set in a struct kiocb->ki_flags by the issuer. If
the completion side of the iocb handling understands this flag, it can
choose to set a kiocb->dio_complete() handler and just call ki_complete
from IRQ context. The issuer must then ensure that this callback is
processed from a task. io_uring punts IRQ completions to task_work
already, so it's trivial wire it up to run more of the completion before
posting a CQE. This is good for up to a 37% improvement in
throughput/latency for low queue depth IO, patch 5 has the details.
If we need to do real work at completion time, iomap will clear the
IOMAP_DIO_CALLER_COMP flag.
This work came about when Andres tested low queue depth dio writes for
postgres and compared it to doing sync dio writes, showing that the
async processing slows us down a lot.
* tag 'xfs-async-dio.6-2023-08-01' of git://git.kernel.dk/linux:
iomap: support IOCB_DIO_CALLER_COMP
io_uring/rw: add write support for IOCB_DIO_CALLER_COMP
fs: add IOCB flags related to passing back dio completions
iomap: add IOMAP_DIO_INLINE_COMP
iomap: only set iocb->private for polled bio
iomap: treat a write through cache the same as FUA
iomap: use an unsigned type for IOMAP_DIO_* defines
iomap: cleanup up iomap_dio_bio_end_io()
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
If IOCB_DIO_CALLER_COMP is set, utilize that to set kiocb->dio_complete
handler and data for that callback. Rather than punt the completion to a
workqueue, we pass back the handler and data to the issuer and will get
a callback from a safe task context.
Using the following fio job to randomly dio write 4k blocks at
queue depths of 1..16:
fio --name=dio-write --filename=/data1/file --time_based=1 \
--runtime=10 --bs=4096 --rw=randwrite --norandommap --buffered=0 \
--cpus_allowed=4 --ioengine=io_uring --iodepth=$depth
shows the following results before and after this patch:
Stock Patched Diff
=======================================
QD1 155K 162K + 4.5%
QD2 290K 313K + 7.9%
QD4 533K 597K +12.0%
QD8 604K 827K +36.9%
QD16 615K 845K +37.4%
which shows nice wins all around. If we factored in per-IOP efficiency,
the wins look even nicer. This becomes apparent as queue depth rises,
as the offloaded workqueue completions runs out of steam.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than gate whether or not we need to punt a dio completion to a
workqueue on whether the IO is a write or not, add an explicit flag for
it. For now we treat them the same, reads always set the flags and async
writes do not.
No functional changes in this patch.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
iocb->private is only used for polled IO, where the completer will
find the bio to poll through that field.
Assign it when we're submitting a polled bio, and get rid of the
dio->poll_bio indirection.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Whether we have a write back cache and are using FUA or don't have
a write back cache at all is the same situation. Treat them the same.
This makes the IOMAP_DIO_WRITE_FUA name a bit misleading, as we have
two cases that provide stable writes:
1) Volatile write cache with FUA writes
2) Normal write without a volatile write cache
Rename that flag to IOMAP_DIO_STABLE_WRITE to make that clearer, and
update some of the FUA comments as well.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IOMAP_DIO_DIRTY shifts by 31 bits, which makes UBSAN unhappy. Clean up
all the defines by making the shifted value an unsigned value.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make the logic a bit easier to follow:
1) Add a release_bio out path, as everybody needs to touch that, and
have our bio ref check jump there if it's non-zero.
2) Add a kiocb local variable.
3) Add comments for each of the three conditions (sync, inline, or
async workqueue punt).
No functional changes in this patch.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When filesystem blocksize is less than folio size (either with
mapping_large_folio_support() or with blocksize < pagesize) and when the
folio is uptodate in pagecache, then even a byte write can cause
an entire folio to be written to disk during writeback. This happens
because we currently don't have a mechanism to track per-block dirty
state within struct iomap_folio_state. We currently only track uptodate
state.
This patch implements support for tracking per-block dirty state in
iomap_folio_state->state bitmap. This should help improve the filesystem
write performance and help reduce write amplification.
Performance testing of below fio workload reveals ~16x performance
improvement using nvme with XFS (4k blocksize) on Power (64K pagesize)
FIO reported write bw scores improved from around ~28 MBps to ~452 MBps.
1. <test_randwrite.fio>
[global]
ioengine=psync
rw=randwrite
overwrite=1
pre_read=1
direct=0
bs=4k
size=1G
dir=./
numjobs=8
fdatasync=1
runtime=60
iodepth=64
group_reporting=1
[fio-run]
2. Also our internal performance team reported that this patch improves
their database workload performance by around ~83% (with XFS on Power)
Reported-by: Aravinda Herle <araherle@in.ibm.com>
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
We dont need to allocate an ifs in ->write_begin() for writes where the
position and length completely overlap with the given folio.
Therefore, such cases are skipped.
Currently when the folio is uptodate, we only allocate ifs at writeback
time (in iomap_writepage_map()). This is ok until now, but when we are
going to add support for per-block dirty state bitmap in ifs, this
could cause some performance degradation. The reason is that if we don't
allocate ifs during ->write_begin(), then we will never mark the
necessary dirty bits in ->write_end() call. And we will have to mark all
the bits as dirty at the writeback time, that could cause the same write
amplification and performance problems as it is now.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
This patch factors iomap_write_delalloc_punch() function out. This function
is resposible for actual punch out operation.
The reason for doing this is, to avoid deep indentation when we bring
punch-out of individual non-dirty blocks within a dirty folio in a later
patch (which adds per-block dirty status handling to iomap) to avoid
delalloc block leak.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
It makes it much easier if we have iomap_punch_t typedef for "punch"
function pointer in all delalloc related punch, scan and release
functions. It will be useful in later patches when we will factor out
iomap_write_delalloc_punch() function.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
folio_next_index() returns an unsigned long value which left shifted
by PAGE_SHIFT could possibly cause an overflow on 32-bit system. Instead
use folio_pos(folio) + folio_size(folio), which does this correctly.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
This patch adds two of the helper routines ifs_is_fully_uptodate()
and ifs_block_is_uptodate() for managing uptodate state of "ifs" state
bitmap.
In later patches ifs state bitmap array will also handle dirty state of all
blocks of a folio. Hence this patch adds some helper routines for handling
uptodate state of the ifs state bitmap.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
iomap_folio_state (ifs) can be derived directly from the folio, making it
unnecessary to pass "ifs" as an argument to iomap_set_range_uptodate().
This patch eliminates "ifs" argument from iomap_set_range_uptodate()
function.
Also, the definition of iomap_set_range_uptodate() and
ifs_set_range_uptodate() functions are moved above ifs_alloc().
In upcoming patches, we plan to introduce additional helper routines for
handling dirty state, with the intention of consolidating all of "ifs"
state handling routines at one place.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
struct iomap_page actually tracks per-block state of a folio.
Hence it make sense to rename some of these function names and data
structures for e.g.
1. struct iomap_page (iop) -> struct iomap_folio_state (ifs)
2. iomap_page_create() -> ifs_alloc()
3. iomap_page_release() -> ifs_free()
4. iomap_iop_set_range_uptodate() -> ifs_set_range_uptodate()
5. to_iomap_page() -> folio->private
Since in later patches we are also going to add per-block dirty state
tracking to iomap_folio_state. Hence this patch also renames "uptodate"
& "uptodate_lock" members of iomap_folio_state to "state" and"state_lock".
We don't really need to_iomap_page() function, instead directly open code
it as folio->private;
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
If we have a large folio, we can copy in larger chunks than PAGE_SIZE.
Start at the maximum page cache size and shrink by half every time we
hit the "we are short on memory" problem.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Use the size of the write as a hint for the size of the folio to create.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Similarly to gfp_t, define fgf_t as its own type to prevent various
misuses and confusion. Leave the flags as FGP_* for now to reduce the
size of this patch; they will be converted to FGF_* later. Move the
documentation to the definition of the type insted of burying it in the
__filemap_get_folio() documentation.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The check for the folio being under writeback is unnecessary; the caller
has checked this and the folio is locked, so the folio cannot be under
writeback at this point.
The comment is somewhat misleading in that it talks about one specific
situation in which we can see a dirty folio. There are others, so change
the comment to explain why we can't release the iomap_page.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
We do not need to release the iomap_page in iomap_invalidate_folio()
to allow the folio to be split. The splitting code will call
->release_folio() if there is still per-fs private data attached to
the folio. At that point, we will check if the folio is still dirty
and decline to release the iomap_page. It is possible to trigger the
warning in perfectly legitimate circumstances (eg if a disk read fails,
we do a partial write to the folio, then we truncate the folio), which
will cause those writes to be lost.
Fixes: 60d8231089f0 ("iomap: Support large folios in invalidatepage")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
We have the new value for ki_pos right at hand in iter.pos, so assign
that instead of recalculating it from ret.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.harjani@gmail.com>
|
|
When write* wrote some data it should return the amount of written data
and not the error code that caused it to stop. Fix a recent regression
in iomap_file_buffered_write that caused it to return the errno instead.
Fixes: 219580eea1ee ("iomap: update ki_pos in iomap_file_buffered_write")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.harjani@gmail.com>
|
|
Pull iomap updates from Darrick Wong:
- Fix a type signature mismatch
- Drop Christoph as maintainer
* tag 'iomap-6.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: drop me [hch] from MAINTAINERS for iomap
fs: iomap: Change the type of blocksize from 'int' to 'unsigned int' in iomap_file_buffered_write_punch_delalloc
|
|
iomap_file_buffered_write_punch_delalloc
The return value type of i_blocksize() is 'unsigned int', so the
type of blocksize has been modified from 'int' to 'unsigned int'
to ensure data type consistency.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
|
|
Use the common helpers for direct I/O page invalidation instead of open
coding the logic. This leads to a slight reordering of checks in
__iomap_dio_rw to keep the logic straight.
Link: https://lkml.kernel.org/r/20230601145904.1385409-9-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
All callers of iomap_file_buffered_write need to updated ki_pos, move it
into common code.
Link: https://lkml.kernel.org/r/20230601145904.1385409-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a helper to invalidate page cache after a dio write.
Link: https://lkml.kernel.org/r/20230601145904.1385409-7-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move the ki_pos update down a bit to prepare for a better common helper
that invalidates pages based of an iocb.
Link: https://lkml.kernel.org/r/20230601145904.1385409-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Chao Yu <chao@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the iomap buffered-io code can't add a folio to a bio, it allocates a
new bio and adds the folio to that one. This is done using bio_add_folio(),
but doesn't check for errors.
As adding a folio to a newly created bio can't fail, use the newly
introduced bio_add_folio_nofail() function.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/58fa893c24c67340a63323f09a179fefdca07f2a.1685532726.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace BIO_NO_PAGE_REF with a BIO_PAGE_REFFED flag that has the inverted
meaning is only set when a page reference has been acquired that needs to
be released by bio_release_pages().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Jan Kara <jack@suse.cz>
cc: Matthew Wilcox <willy@infradead.org>
cc: Logan Gunthorpe <logang@deltatee.com>
cc: linux-block@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230522205744.2825689-4-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ZERO_PAGE can't go away, no need to hold an extra reference.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
cc: Al Viro <viro@zeniv.linux.org.uk>
cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230522205744.2825689-2-dhowells@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull iomap updates from Darrick Wong:
"The only changes for this cycle are the addition of tracepoints to the
iomap directio code so that Ritesh (who is working on porting ext2 to
iomap) can observe the io flows more easily.
Summary:
- Remove an unused symbol
- Add tracepoints for the directio code"
* tag 'iomap-6.4-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Add DIO tracepoints
iomap: Remove IOMAP_DIO_NOSYNC unused dio flag
fs.h: Add TRACE_IOCB_STRINGS for use in trace points
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Nick Piggin's "shoot lazy tlbs" series, to improve the peformance of
switching from a user process to a kernel thread.
- More folio conversions from Kefeng Wang, Zhang Peng and Pankaj
Raghav.
- zsmalloc performance improvements from Sergey Senozhatsky.
- Yue Zhao has found and fixed some data race issues around the
alteration of memcg userspace tunables.
- VFS rationalizations from Christoph Hellwig:
- removal of most of the callers of write_one_page()
- make __filemap_get_folio()'s return value more useful
- Luis Chamberlain has changed tmpfs so it no longer requires swap
backing. Use `mount -o noswap'.
- Qi Zheng has made the slab shrinkers operate locklessly, providing
some scalability benefits.
- Keith Busch has improved dmapool's performance, making part of its
operations O(1) rather than O(n).
- Peter Xu adds the UFFD_FEATURE_WP_UNPOPULATED feature to userfaultd,
permitting userspace to wr-protect anon memory unpopulated ptes.
- Kirill Shutemov has changed MAX_ORDER's meaning to be inclusive
rather than exclusive, and has fixed a bunch of errors which were
caused by its unintuitive meaning.
- Axel Rasmussen give userfaultfd the UFFDIO_CONTINUE_MODE_WP feature,
which causes minor faults to install a write-protected pte.
- Vlastimil Babka has done some maintenance work on vma_merge():
cleanups to the kernel code and improvements to our userspace test
harness.
- Cleanups to do_fault_around() by Lorenzo Stoakes.
- Mike Rapoport has moved a lot of initialization code out of various
mm/ files and into mm/mm_init.c.
- Lorenzo Stoakes removd vmf_insert_mixed_prot(), which was added for
DRM, but DRM doesn't use it any more.
- Lorenzo has also coverted read_kcore() and vread() to use iterators
and has thereby removed the use of bounce buffers in some cases.
- Lorenzo has also contributed further cleanups of vma_merge().
- Chaitanya Prakash provides some fixes to the mmap selftesting code.
- Matthew Wilcox changes xfs and afs so they no longer take sleeping
locks in ->map_page(), a step towards RCUification of pagefaults.
- Suren Baghdasaryan has improved mmap_lock scalability by switching to
per-VMA locking.
- Frederic Weisbecker has reworked the percpu cache draining so that it
no longer causes latency glitches on cpu isolated workloads.
- Mike Rapoport cleans up and corrects the ARCH_FORCE_MAX_ORDER Kconfig
logic.
- Liu Shixin has changed zswap's initialization so we no longer waste a
chunk of memory if zswap is not being used.
- Yosry Ahmed has improved the performance of memcg statistics
flushing.
- David Stevens has fixed several issues involving khugepaged,
userfaultfd and shmem.
- Christoph Hellwig has provided some cleanup work to zram's IO-related
code paths.
- David Hildenbrand has fixed up some issues in the selftest code's
testing of our pte state changing.
- Pankaj Raghav has made page_endio() unneeded and has removed it.
- Peter Xu contributed some rationalizations of the userfaultfd
selftests.
- Yosry Ahmed has fixed an issue around memcg's page recalim
accounting.
- Chaitanya Prakash has fixed some arm-related issues in the
selftests/mm code.
- Longlong Xia has improved the way in which KSM handles hwpoisoned
pages.
- Peter Xu fixes a few issues with uffd-wp at fork() time.
- Stefan Roesch has changed KSM so that it may now be used on a
per-process and per-cgroup basis.
* tag 'mm-stable-2023-04-27-15-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (369 commits)
mm,unmap: avoid flushing TLB in batch if PTE is inaccessible
shmem: restrict noswap option to initial user namespace
mm/khugepaged: fix conflicting mods to collapse_file()
sparse: remove unnecessary 0 values from rc
mm: move 'mmap_min_addr' logic from callers into vm_unmapped_area()
hugetlb: pte_alloc_huge() to replace huge pte_alloc_map()
maple_tree: fix allocation in mas_sparse_area()
mm: do not increment pgfault stats when page fault handler retries
zsmalloc: allow only one active pool compaction context
selftests/mm: add new selftests for KSM
mm: add new KSM process and sysfs knobs
mm: add new api to enable ksm per process
mm: shrinkers: fix debugfs file permissions
mm: don't check VMA write permissions if the PTE/PMD indicates write permissions
migrate_pages_batch: fix statistics for longterm pin retry
userfaultfd: use helper function range_in_vma()
lib/show_mem.c: use for_each_populated_zone() simplify code
mm: correct arg in reclaim_pages()/reclaim_clean_pages_from_list()
fs/buffer: convert create_page_buffers to folio_create_buffers
fs/buffer: add folio_create_empty_buffers helper
...
|
|
Add trace_iomap_dio_rw_begin, trace_iomap_dio_rw_queued and
trace_iomap_dio_complete tracepoint.
trace_iomap_dio_rw_queued is mostly only to know that the request was
queued and -EIOCBQUEUED was returned. It is mostly trace_iomap_dio_rw_begin
& trace_iomap_dio_complete which has all the details.
<example output log>
a.out-2073 [006] 134.225717: iomap_dio_rw_begin: dev 7:7 ino 0xe size 0x0 offset 0x0 length 0x1000 done_before 0x0 flags DIRECT|WRITE dio_flags DIO_FORCE_WAIT aio 1
a.out-2073 [006] 134.226234: iomap_dio_complete: dev 7:7 ino 0xe size 0x1000 offset 0x1000 flags DIRECT|WRITE aio 1 error 0 ret 4096
a.out-2074 [006] 136.225975: iomap_dio_rw_begin: dev 7:7 ino 0xe size 0x1000 offset 0x0 length 0x1000 done_before 0x0 flags DIRECT dio_flags aio 1
a.out-2074 [006] 136.226173: iomap_dio_rw_queued: dev 7:7 ino 0xe size 0x1000 offset 0x1000 length 0x0
ksoftirqd/3-31 [003] 136.226389: iomap_dio_complete: dev 7:7 ino 0xe size 0x1000 offset 0x1000 flags DIRECT aio 1 error 0 ret 4096
a.out-2075 [003] 141.674969: iomap_dio_rw_begin: dev 7:7 ino 0xe size 0x1000 offset 0x0 length 0x1000 done_before 0x0 flags DIRECT|WRITE dio_flags aio 1
a.out-2075 [003] 141.676085: iomap_dio_rw_queued: dev 7:7 ino 0xe size 0x1000 offset 0x1000 length 0x0
kworker/2:0-27 [002] 141.676432: iomap_dio_complete: dev 7:7 ino 0xe size 0x1000 offset 0x1000 flags DIRECT|WRITE aio 1 error 0 ret 4096
a.out-2077 [006] 143.443746: iomap_dio_rw_begin: dev 7:7 ino 0xe size 0x1000 offset 0x0 length 0x1000 done_before 0x0 flags DIRECT dio_flags aio 1
a.out-2077 [006] 143.443866: iomap_dio_rw_queued: dev 7:7 ino 0xe size 0x1000 offset 0x1000 length 0x0
ksoftirqd/5-41 [005] 143.444134: iomap_dio_complete: dev 7:7 ino 0xe size 0x1000 offset 0x1000 flags DIRECT aio 1 error 0 ret 4096
a.out-2078 [007] 146.716833: iomap_dio_rw_begin: dev 7:7 ino 0xe size 0x1000 offset 0x0 length 0x1000 done_before 0x0 flags DIRECT dio_flags aio 0
a.out-2078 [007] 146.717639: iomap_dio_complete: dev 7:7 ino 0xe size 0x1000 offset 0x1000 flags DIRECT aio 0 error 0 ret 4096
a.out-2079 [006] 148.972605: iomap_dio_rw_begin: dev 7:7 ino 0xe size 0x1000 offset 0x0 length 0x1000 done_before 0x0 flags DIRECT dio_flags aio 0
a.out-2079 [006] 148.973099: iomap_dio_complete: dev 7:7 ino 0xe size 0x1000 offset 0x1000 flags DIRECT aio 0 error 0 ret 4096
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: line up strings all prettylike]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
IOMAP_DIO_NOSYNC earlier was added for use in btrfs. But it seems for
aio dsync writes this is not useful anyway. For aio dsync case, we
we queue the request and return -EIOCBQUEUED. Now, since IOMAP_DIO_NOSYNC
doesn't let iomap_dio_complete() to call generic_write_sync(),
hence we may lose the sync write.
Hence kill this flag as it is not in use by any FS now.
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
This particular combination of flags is used by most filesystems
in their ->write_begin method, although it does find use in a
few other places. Before folios, it warranted its own function
(grab_cache_page_write_begin()), but I think that just having specialised
flags is enough. It certainly helps the few places that have been
converted from grab_cache_page_write_begin() to __filemap_get_folio().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20230324180129.1220691-2-willy@infradead.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Instead of returning NULL for all errors, distinguish between:
- no entry found and not asked to allocated (-ENOENT)
- failed to allocate memory (-ENOMEM)
- would block (-EAGAIN)
so that callers don't have to guess the error based on the passed in
flags.
Also pass through the error through the direct callers: filemap_get_folio,
filemap_lock_folio filemap_grab_folio and filemap_get_incore_folio.
[hch@lst.de: fix null-pointer deref]
Link: https://lkml.kernel.org/r/20230310070023.GA13563@lst.de
Link: https://lkml.kernel.org/r/20230310043137.GA1624890@u2004
Link: https://lkml.kernel.org/r/20230307143410.28031-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nilfs2]
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
Pull iomap updates from Darrick Wong:
"This is mostly rearranging things to make life easier for gfs2,
nothing all that mindblowing for this release.
- Change when the iomap page_done function is called so that we still
have a locked folio in the success case. This fixes a writeback
race in gfs2
- Change when the iomap page_prepare function is called so that gfs2
can recover from OOM scenarios more gracefully
- Rename the iomap page_ops to folio_ops, since they operate on
folios now"
* tag 'iomap-6.3-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Rename page_ops to folio_ops
iomap: Rename page_prepare handler to get_folio
iomap: Add __iomap_get_folio helper
iomap/gfs2: Get page in page_prepare handler
iomap: Add iomap_get_folio helper
iomap: Rename page_done handler to put_folio
iomap/gfs2: Unlock and put folio in page_done handler
iomap: Add __iomap_put_folio helper
|
|
No users left now that btrfs takes REQ_OP_WRITE bios from iomap and
splits and converts them to REQ_OP_ZONE_APPEND internally.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Patch series "Convert writepage_t to use a folio".
More folioisation. I split out the mpage work from everything else
because it completely dominated the patch, but some implementations I just
converted outright.
This patch (of 2):
We always write back an entire folio, but that's currently passed as the
head page. Convert all filesystems that use write_cache_pages() to expect
a folio instead of a page.
Link: https://lkml.kernel.org/r/20230126201255.1681189-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230126201255.1681189-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The operations in struct page_ops all operate on folios, so rename
struct page_ops to struct folio_ops.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[djwong: port around not removing iomap_valid]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The ->page_prepare() handler in struct iomap_page_ops is now somewhat
misnamed, so rename it to ->get_folio().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Add an __iomap_get_folio() helper as the counterpart of the existing
__iomap_put_folio() helper. Use the new helper in iomap_write_begin().
Not a functional change.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Change the iomap ->page_prepare() handler to get and return a locked
folio instead of doing that in iomap_write_begin(). This allows to
recover from out-of-memory situations in ->page_prepare(), which
eliminates the corresponding error handling code in iomap_write_begin().
The ->put_folio() handler now also isn't called with NULL as the folio
value anymore.
Filesystems are expected to use the iomap_get_folio() helper for getting
locked folios in their ->page_prepare() handlers.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Add an iomap_get_folio() helper that gets a folio reference based on
an iomap iterator and an offset into the address space. Use it in
iomap_write_begin().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The ->page_done() handler in struct iomap_page_ops is now somewhat
misnamed in that it mainly deals with unlocking and putting a folio, so
rename it to ->put_folio().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
