summaryrefslogtreecommitdiff
path: root/fs/ksmbd
AgeCommit message (Collapse)Author
2022-08-15ksmbd: don't remove dos attribute xattr on O_TRUNC openNamjae Jeon
When smb client open file in ksmbd share with O_TRUNC, dos attribute xattr is removed as well as data in file. This cause the FSCTL_SET_SPARSE request from the client fails because ksmbd can't update the dos attribute after setting ATTR_SPARSE_FILE. And this patch fix xfstests generic/469 test also. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-15ksmbd: remove unnecessary generic_fillattr in smb2_openHyunchul Lee
Remove unnecessary generic_fillattr to fix wrong AllocationSize of SMB2_CREATE response, And Move the call of ksmbd_vfs_getattr above the place where stat is needed because of truncate. This patch fixes wrong AllocationSize of SMB2_CREATE response. Because ext4 updates inode->i_blocks only when disk space is allocated, generic_fillattr does not set stat.blocks properly for delayed allocation. But ext4 returns the blocks that include the delayed allocation blocks when getattr is called. The issue can be reproduced with commands below: touch ${FILENAME} xfs_io -c "pwrite -S 0xAB 0 40k" ${FILENAME} xfs_io -c "stat" ${FILENAME} 40KB are written, but the count of blocks is 8. Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-11ksmbd: request update to stale share configAtte Heikkilä
ksmbd_share_config_get() retrieves the cached share config as long as there is at least one connection to the share. This is an issue when the user space utilities are used to update share configs. In that case there is a need to inform ksmbd that it should not use the cached share config for a new connection to the share. With these changes the tree connection flag KSMBD_TREE_CONN_FLAG_UPDATE indicates this. When this flag is set, ksmbd removes the share config from the shares hash table meaning that ksmbd_share_config_get() ends up requesting a share config from user space. Signed-off-by: Atte Heikkilä <atteh.mailbox@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-11ksmbd: return STATUS_BAD_NETWORK_NAME error status if share is not configuredNamjae Jeon
If share is not configured in smb.conf, smb2 tree connect should return STATUS_BAD_NETWORK_NAME instead of STATUS_BAD_NETWORK_PATH. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-08Merge tag '5.20-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull ksmbd updates from Steve French: - fixes for memory access bugs (out of bounds access, oops, leak) - multichannel fixes - session disconnect performance improvement, and session register improvement - cleanup * tag '5.20-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: fix heap-based overflow in set_ntacl_dacl() ksmbd: prevent out of bound read for SMB2_TREE_CONNNECT ksmbd: prevent out of bound read for SMB2_WRITE ksmbd: fix use-after-free bug in smb2_tree_disconect ksmbd: fix memory leak in smb2_handle_negotiate ksmbd: fix racy issue while destroying session on multichannel ksmbd: use wait_event instead of schedule_timeout() ksmbd: fix kernel oops from idr_remove() ksmbd: add channel rwlock ksmbd: replace sessions list in connection with xarray MAINTAINERS: ksmbd: add entry for documentation ksmbd: remove unused ksmbd_share_configs_cleanup function
2022-08-04ksmbd: fix heap-based overflow in set_ntacl_dacl()Namjae Jeon
The testcase use SMB2_SET_INFO_HE command to set a malformed file attribute under the label `security.NTACL`. SMB2_QUERY_INFO_HE command in testcase trigger the following overflow. [ 4712.003781] ================================================================== [ 4712.003790] BUG: KASAN: slab-out-of-bounds in build_sec_desc+0x842/0x1dd0 [ksmbd] [ 4712.003807] Write of size 1060 at addr ffff88801e34c068 by task kworker/0:0/4190 [ 4712.003813] CPU: 0 PID: 4190 Comm: kworker/0:0 Not tainted 5.19.0-rc5 #1 [ 4712.003850] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 4712.003867] Call Trace: [ 4712.003870] <TASK> [ 4712.003873] dump_stack_lvl+0x49/0x5f [ 4712.003935] print_report.cold+0x5e/0x5cf [ 4712.003972] ? ksmbd_vfs_get_sd_xattr+0x16d/0x500 [ksmbd] [ 4712.003984] ? cmp_map_id+0x200/0x200 [ 4712.003988] ? build_sec_desc+0x842/0x1dd0 [ksmbd] [ 4712.004000] kasan_report+0xaa/0x120 [ 4712.004045] ? build_sec_desc+0x842/0x1dd0 [ksmbd] [ 4712.004056] kasan_check_range+0x100/0x1e0 [ 4712.004060] memcpy+0x3c/0x60 [ 4712.004064] build_sec_desc+0x842/0x1dd0 [ksmbd] [ 4712.004076] ? parse_sec_desc+0x580/0x580 [ksmbd] [ 4712.004088] ? ksmbd_acls_fattr+0x281/0x410 [ksmbd] [ 4712.004099] smb2_query_info+0xa8f/0x6110 [ksmbd] [ 4712.004111] ? psi_group_change+0x856/0xd70 [ 4712.004148] ? update_load_avg+0x1c3/0x1af0 [ 4712.004152] ? asym_cpu_capacity_scan+0x5d0/0x5d0 [ 4712.004157] ? xas_load+0x23/0x300 [ 4712.004162] ? smb2_query_dir+0x1530/0x1530 [ksmbd] [ 4712.004173] ? _raw_spin_lock_bh+0xe0/0xe0 [ 4712.004179] handle_ksmbd_work+0x30e/0x1020 [ksmbd] [ 4712.004192] process_one_work+0x778/0x11c0 [ 4712.004227] ? _raw_spin_lock_irq+0x8e/0xe0 [ 4712.004231] worker_thread+0x544/0x1180 [ 4712.004234] ? __cpuidle_text_end+0x4/0x4 [ 4712.004239] kthread+0x282/0x320 [ 4712.004243] ? process_one_work+0x11c0/0x11c0 [ 4712.004246] ? kthread_complete_and_exit+0x30/0x30 [ 4712.004282] ret_from_fork+0x1f/0x30 This patch add the buffer validation for security descriptor that is stored by malformed SMB2_SET_INFO_HE command. and allocate large response buffer about SMB2_O_INFO_SECURITY file info class. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-17771 Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-31ksmbd: prevent out of bound read for SMB2_TREE_CONNNECTHyunchul Lee
if Status is not 0 and PathLength is long, smb_strndup_from_utf16 could make out of bound read in smb2_tree_connnect. This bug can lead an oops looking something like: [ 1553.882047] BUG: KASAN: slab-out-of-bounds in smb_strndup_from_utf16+0x469/0x4c0 [ksmbd] [ 1553.882064] Read of size 2 at addr ffff88802c4eda04 by task kworker/0:2/42805 ... [ 1553.882095] Call Trace: [ 1553.882098] <TASK> [ 1553.882101] dump_stack_lvl+0x49/0x5f [ 1553.882107] print_report.cold+0x5e/0x5cf [ 1553.882112] ? smb_strndup_from_utf16+0x469/0x4c0 [ksmbd] [ 1553.882122] kasan_report+0xaa/0x120 [ 1553.882128] ? smb_strndup_from_utf16+0x469/0x4c0 [ksmbd] [ 1553.882139] __asan_report_load_n_noabort+0xf/0x20 [ 1553.882143] smb_strndup_from_utf16+0x469/0x4c0 [ksmbd] [ 1553.882155] ? smb_strtoUTF16+0x3b0/0x3b0 [ksmbd] [ 1553.882166] ? __kmalloc_node+0x185/0x430 [ 1553.882171] smb2_tree_connect+0x140/0xab0 [ksmbd] [ 1553.882185] handle_ksmbd_work+0x30e/0x1020 [ksmbd] [ 1553.882197] process_one_work+0x778/0x11c0 [ 1553.882201] ? _raw_spin_lock_irq+0x8e/0xe0 [ 1553.882206] worker_thread+0x544/0x1180 [ 1553.882209] ? __cpuidle_text_end+0x4/0x4 [ 1553.882214] kthread+0x282/0x320 [ 1553.882218] ? process_one_work+0x11c0/0x11c0 [ 1553.882221] ? kthread_complete_and_exit+0x30/0x30 [ 1553.882225] ret_from_fork+0x1f/0x30 [ 1553.882231] </TASK> There is no need to check error request validation in server. This check allow invalid requests not to validate message. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-17818 Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-31ksmbd: prevent out of bound read for SMB2_WRITEHyunchul Lee
OOB read memory can be written to a file, if DataOffset is 0 and Length is too large in SMB2_WRITE request of compound request. To prevent this, when checking the length of the data area of SMB2_WRITE in smb2_get_data_area_len(), let the minimum of DataOffset be the size of SMB2 header + the size of SMB2_WRITE header. This bug can lead an oops looking something like: [ 798.008715] BUG: KASAN: slab-out-of-bounds in copy_page_from_iter_atomic+0xd3d/0x14b0 [ 798.008724] Read of size 252 at addr ffff88800f863e90 by task kworker/0:2/2859 ... [ 798.008754] Call Trace: [ 798.008756] <TASK> [ 798.008759] dump_stack_lvl+0x49/0x5f [ 798.008764] print_report.cold+0x5e/0x5cf [ 798.008768] ? __filemap_get_folio+0x285/0x6d0 [ 798.008774] ? copy_page_from_iter_atomic+0xd3d/0x14b0 [ 798.008777] kasan_report+0xaa/0x120 [ 798.008781] ? copy_page_from_iter_atomic+0xd3d/0x14b0 [ 798.008784] kasan_check_range+0x100/0x1e0 [ 798.008788] memcpy+0x24/0x60 [ 798.008792] copy_page_from_iter_atomic+0xd3d/0x14b0 [ 798.008795] ? pagecache_get_page+0x53/0x160 [ 798.008799] ? iov_iter_get_pages_alloc+0x1590/0x1590 [ 798.008803] ? ext4_write_begin+0xfc0/0xfc0 [ 798.008807] ? current_time+0x72/0x210 [ 798.008811] generic_perform_write+0x2c8/0x530 [ 798.008816] ? filemap_fdatawrite_wbc+0x180/0x180 [ 798.008820] ? down_write+0xb4/0x120 [ 798.008824] ? down_write_killable+0x130/0x130 [ 798.008829] ext4_buffered_write_iter+0x137/0x2c0 [ 798.008833] ext4_file_write_iter+0x40b/0x1490 [ 798.008837] ? __fsnotify_parent+0x275/0xb20 [ 798.008842] ? __fsnotify_update_child_dentry_flags+0x2c0/0x2c0 [ 798.008846] ? ext4_buffered_write_iter+0x2c0/0x2c0 [ 798.008851] __kernel_write+0x3a1/0xa70 [ 798.008855] ? __x64_sys_preadv2+0x160/0x160 [ 798.008860] ? security_file_permission+0x4a/0xa0 [ 798.008865] kernel_write+0xbb/0x360 [ 798.008869] ksmbd_vfs_write+0x27e/0xb90 [ksmbd] [ 798.008881] ? ksmbd_vfs_read+0x830/0x830 [ksmbd] [ 798.008892] ? _raw_read_unlock+0x2a/0x50 [ 798.008896] smb2_write+0xb45/0x14e0 [ksmbd] [ 798.008909] ? __kasan_check_write+0x14/0x20 [ 798.008912] ? _raw_spin_lock_bh+0xd0/0xe0 [ 798.008916] ? smb2_read+0x15e0/0x15e0 [ksmbd] [ 798.008927] ? memcpy+0x4e/0x60 [ 798.008931] ? _raw_spin_unlock+0x19/0x30 [ 798.008934] ? ksmbd_smb2_check_message+0x16af/0x2350 [ksmbd] [ 798.008946] ? _raw_spin_lock_bh+0xe0/0xe0 [ 798.008950] handle_ksmbd_work+0x30e/0x1020 [ksmbd] [ 798.008962] process_one_work+0x778/0x11c0 [ 798.008966] ? _raw_spin_lock_irq+0x8e/0xe0 [ 798.008970] worker_thread+0x544/0x1180 [ 798.008973] ? __cpuidle_text_end+0x4/0x4 [ 798.008977] kthread+0x282/0x320 [ 798.008982] ? process_one_work+0x11c0/0x11c0 [ 798.008985] ? kthread_complete_and_exit+0x30/0x30 [ 798.008989] ret_from_fork+0x1f/0x30 [ 798.008995] </TASK> Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-17817 Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-31ksmbd: fix use-after-free bug in smb2_tree_disconectNamjae Jeon
smb2_tree_disconnect() freed the struct ksmbd_tree_connect, but it left the dangling pointer. It can be accessed again under compound requests. This bug can lead an oops looking something link: [ 1685.468014 ] BUG: KASAN: use-after-free in ksmbd_tree_conn_disconnect+0x131/0x160 [ksmbd] [ 1685.468068 ] Read of size 4 at addr ffff888102172180 by task kworker/1:2/4807 ... [ 1685.468130 ] Call Trace: [ 1685.468132 ] <TASK> [ 1685.468135 ] dump_stack_lvl+0x49/0x5f [ 1685.468141 ] print_report.cold+0x5e/0x5cf [ 1685.468145 ] ? ksmbd_tree_conn_disconnect+0x131/0x160 [ksmbd] [ 1685.468157 ] kasan_report+0xaa/0x120 [ 1685.468194 ] ? ksmbd_tree_conn_disconnect+0x131/0x160 [ksmbd] [ 1685.468206 ] __asan_report_load4_noabort+0x14/0x20 [ 1685.468210 ] ksmbd_tree_conn_disconnect+0x131/0x160 [ksmbd] [ 1685.468222 ] smb2_tree_disconnect+0x175/0x250 [ksmbd] [ 1685.468235 ] handle_ksmbd_work+0x30e/0x1020 [ksmbd] [ 1685.468247 ] process_one_work+0x778/0x11c0 [ 1685.468251 ] ? _raw_spin_lock_irq+0x8e/0xe0 [ 1685.468289 ] worker_thread+0x544/0x1180 [ 1685.468293 ] ? __cpuidle_text_end+0x4/0x4 [ 1685.468297 ] kthread+0x282/0x320 [ 1685.468301 ] ? process_one_work+0x11c0/0x11c0 [ 1685.468305 ] ? kthread_complete_and_exit+0x30/0x30 [ 1685.468309 ] ret_from_fork+0x1f/0x30 Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-17816 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-31ksmbd: fix memory leak in smb2_handle_negotiateNamjae Jeon
The allocated memory didn't free under an error path in smb2_handle_negotiate(). Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-17815 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-31ksmbd: fix racy issue while destroying session on multichannelNamjae Jeon
After multi-channel connection with windows, Several channels of session are connected. Among them, if there is a problem in one channel, Windows connects again after disconnecting the channel. In this process, the session is released and a kernel oop can occurs while processing requests to other channels. When the channel is disconnected, if other channels still exist in the session after deleting the channel from the channel list in the session, the session should not be released. Finally, the session will be released after all channels are disconnected. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-31ksmbd: use wait_event instead of schedule_timeout()Namjae Jeon
ksmbd threads eating masses of cputime when connection is disconnected. If connection is disconnected, ksmbd thread waits for pending requests to be processed using schedule_timeout. schedule_timeout() incorrectly is used, and it is more efficient to use wait_event/wake_up than to check r_count every time with timeout. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-26ksmbd: fix kernel oops from idr_remove()Namjae Jeon
There is a report that kernel oops happen from idr_remove(). kernel: BUG: kernel NULL pointer dereference, address: 0000000000000010 kernel: RIP: 0010:idr_remove+0x1/0x20 kernel: __ksmbd_close_fd+0xb2/0x2d0 [ksmbd] kernel: ksmbd_vfs_read+0x91/0x190 [ksmbd] kernel: ksmbd_fd_put+0x29/0x40 [ksmbd] kernel: smb2_read+0x210/0x390 [ksmbd] kernel: __process_request+0xa4/0x180 [ksmbd] kernel: __handle_ksmbd_work+0xf0/0x290 [ksmbd] kernel: handle_ksmbd_work+0x2d/0x50 [ksmbd] kernel: process_one_work+0x21d/0x3f0 kernel: worker_thread+0x50/0x3d0 kernel: rescuer_thread+0x390/0x390 kernel: kthread+0xee/0x120 kthread_complete_and_exit+0x20/0x20 kernel: ret_from_fork+0x22/0x30 While accessing files, If connection is disconnected, windows send session setup request included previous session destroy. But while still processing requests on previous session, this request destroy file table, which mean file table idr will be freed and set to NULL. So kernel oops happen from ft->idr in __ksmbd_close_fd(). This patch don't directly destroy session in destroy_previous_session(). It just set to KSMBD_SESS_EXITING so that connection will be terminated after finishing the rest of requests. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-26ksmbd: add channel rwlockNamjae Jeon
Add missing rwlock for channel list in session. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-26ksmbd: replace sessions list in connection with xarrayNamjae Jeon
Replace sessions list in connection with xarray. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-24ksmbd: remove unused ksmbd_share_configs_cleanup functionNamjae Jeon
remove unused ksmbd_share_configs_cleanup function. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-15acl: move idmapped mount fixup into vfs_{g,s}etxattr()Christian Brauner
This cycle we added support for mounting overlayfs on top of idmapped mounts. Recently I've started looking into potential corner cases when trying to add additional tests and I noticed that reporting for POSIX ACLs is currently wrong when using idmapped layers with overlayfs mounted on top of it. I'm going to give a rather detailed explanation to both the origin of the problem and the solution. Let's assume the user creates the following directory layout and they have a rootfs /var/lib/lxc/c1/rootfs. The files in this rootfs are owned as you would expect files on your host system to be owned. For example, ~/.bashrc for your regular user would be owned by 1000:1000 and /root/.bashrc would be owned by 0:0. IOW, this is just regular boring filesystem tree on an ext4 or xfs filesystem. The user chooses to set POSIX ACLs using the setfacl binary granting the user with uid 4 read, write, and execute permissions for their .bashrc file: setfacl -m u:4:rwx /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc Now they to expose the whole rootfs to a container using an idmapped mount. So they first create: mkdir -pv /vol/contpool/{ctrover,merge,lowermap,overmap} mkdir -pv /vol/contpool/ctrover/{over,work} chown 10000000:10000000 /vol/contpool/ctrover/{over,work} The user now creates an idmapped mount for the rootfs: mount-idmapped/mount-idmapped --map-mount=b:0:10000000:65536 \ /var/lib/lxc/c2/rootfs \ /vol/contpool/lowermap This for example makes it so that /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc which is owned by uid and gid 1000 as being owned by uid and gid 10001000 at /vol/contpool/lowermap/home/ubuntu/.bashrc. Assume the user wants to expose these idmapped mounts through an overlayfs mount to a container. mount -t overlay overlay \ -o lowerdir=/vol/contpool/lowermap, \ upperdir=/vol/contpool/overmap/over, \ workdir=/vol/contpool/overmap/work \ /vol/contpool/merge The user can do this in two ways: (1) Mount overlayfs in the initial user namespace and expose it to the container. (2) Mount overlayfs on top of the idmapped mounts inside of the container's user namespace. Let's assume the user chooses the (1) option and mounts overlayfs on the host and then changes into a container which uses the idmapping 0:10000000:65536 which is the same used for the two idmapped mounts. Now the user tries to retrieve the POSIX ACLs using the getfacl command getfacl -n /vol/contpool/lowermap/home/ubuntu/.bashrc and to their surprise they see: # file: vol/contpool/merge/home/ubuntu/.bashrc # owner: 1000 # group: 1000 user::rw- user:4294967295:rwx group::r-- mask::rwx other::r-- indicating the the uid wasn't correctly translated according to the idmapped mount. The problem is how we currently translate POSIX ACLs. Let's inspect the callchain in this example: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } If the user chooses to use option (2) and mounts overlayfs on top of idmapped mounts inside the container things don't look that much better: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get == ovl_posix_acl_xattr_get() | -> ovl_xattr_get() | -> vfs_getxattr() | -> __vfs_getxattr() | -> handler->get() /* lower filesystem callback */ |> posix_acl_fix_xattr_to_user() { 4 = make_kuid(&init_user_ns, 4); 4 = mapped_kuid_fs(&init_user_ns, 4); /* FAILURE */ -1 = from_kuid(0:10000000:65536 /* caller's idmapping */, 4); } As is easily seen the problem arises because the idmapping of the lower mount isn't taken into account as all of this happens in do_gexattr(). But do_getxattr() is always called on an overlayfs mount and inode and thus cannot possible take the idmapping of the lower layers into account. This problem is similar for fscaps but there the translation happens as part of vfs_getxattr() already. Let's walk through an fscaps overlayfs callchain: setcap 'cap_net_raw+ep' /var/lib/lxc/c2/rootfs/home/ubuntu/.bashrc The expected outcome here is that we'll receive the cap_net_raw capability as we are able to map the uid associated with the fscap to 0 within our container. IOW, we want to see 0 as the result of the idmapping translations. If the user chooses option (1) we get the following callchain for fscaps: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() ________________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | -> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 10000000 = from_kuid(0:0:4k /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ And if the user chooses option (2) we get: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() -> vfs_getxattr() -> xattr_getsecurity() -> security_inode_getsecurity() _______________________________ -> cap_inode_getsecurity() | | { V | 10000000 = make_kuid(0:10000000:65536 /* overlayfs idmapping */, 0); | 10000000 = mapped_kuid_fs(0:0:4k /* no idmapped mount */, 10000000); | /* Expected result is 0 and thus that we own the fscap. */ | 0 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000000); | } | -> vfs_getxattr_alloc() | -> handler->get == ovl_other_xattr_get() | |-> vfs_getxattr() | -> xattr_getsecurity() | -> security_inode_getsecurity() | -> cap_inode_getsecurity() | { | 0 = make_kuid(0:0:4k /* lower s_user_ns */, 0); | 10000000 = mapped_kuid_fs(0:10000000:65536 /* idmapped mount */, 0); | 0 = from_kuid(0:10000000:65536 /* overlayfs idmapping */, 10000000); | |____________________________________________________________________| } -> vfs_getxattr_alloc() -> handler->get == /* lower filesystem callback */ We can see how the translation happens correctly in those cases as the conversion happens within the vfs_getxattr() helper. For POSIX ACLs we need to do something similar. However, in contrast to fscaps we cannot apply the fix directly to the kernel internal posix acl data structure as this would alter the cached values and would also require a rework of how we currently deal with POSIX ACLs in general which almost never take the filesystem idmapping into account (the noteable exception being FUSE but even there the implementation is special) and instead retrieve the raw values based on the initial idmapping. The correct values are then generated right before returning to userspace. The fix for this is to move taking the mount's idmapping into account directly in vfs_getxattr() instead of having it be part of posix_acl_fix_xattr_to_user(). To this end we split out two small and unexported helpers posix_acl_getxattr_idmapped_mnt() and posix_acl_setxattr_idmapped_mnt(). The former to be called in vfs_getxattr() and the latter to be called in vfs_setxattr(). Let's go back to the original example. Assume the user chose option (1) and mounted overlayfs on top of idmapped mounts on the host: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:0:4k /* initial idmapping */ sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { | | V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(&init_user_ns, 10000004); | } |_________________________________________________ | | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmapping */, 10000004); } And similarly if the user chooses option (1) and mounted overayfs on top of idmapped mounts inside the container: idmapped mount /vol/contpool/merge: 0:10000000:65536 caller's idmapping: 0:10000000:65536 overlayfs idmapping (ofs->creator_cred): 0:10000000:65536 sys_getxattr() -> path_getxattr() -> getxattr() -> do_getxattr() |> vfs_getxattr() | |> __vfs_getxattr() | | -> handler->get == ovl_posix_acl_xattr_get() | | -> ovl_xattr_get() | | -> vfs_getxattr() | | |> __vfs_getxattr() | | | -> handler->get() /* lower filesystem callback */ | | |> posix_acl_getxattr_idmapped_mnt() | | { | | 4 = make_kuid(&init_user_ns, 4); | | 10000004 = mapped_kuid_fs(0:10000000:65536 /* lower idmapped mount */, 4); | | 10000004 = from_kuid(&init_user_ns, 10000004); | | |_______________________ | | } | | | | | |> posix_acl_getxattr_idmapped_mnt() | | { V | 10000004 = make_kuid(&init_user_ns, 10000004); | 10000004 = mapped_kuid_fs(&init_user_ns /* no idmapped mount */, 10000004); | 10000004 = from_kuid(0(&init_user_ns, 10000004); | |_________________________________________________ | } | | | |> posix_acl_fix_xattr_to_user() | { V 10000004 = make_kuid(0:0:4k /* init_user_ns */, 10000004); /* SUCCESS */ 4 = from_kuid(0:10000000:65536 /* caller's idmappings */, 10000004); } The last remaining problem we need to fix here is ovl_get_acl(). During ovl_permission() overlayfs will call: ovl_permission() -> generic_permission() -> acl_permission_check() -> check_acl() -> get_acl() -> inode->i_op->get_acl() == ovl_get_acl() > get_acl() /* on the underlying filesystem) ->inode->i_op->get_acl() == /*lower filesystem callback */ -> posix_acl_permission() passing through the get_acl request to the underlying filesystem. This will retrieve the acls stored in the lower filesystem without taking the idmapping of the underlying mount into account as this would mean altering the cached values for the lower filesystem. So we block using ACLs for now until we decided on a nice way to fix this. Note this limitation both in the documentation and in the code. The most straightforward solution would be to have ovl_get_acl() simply duplicate the ACLs, update the values according to the idmapped mount and return it to acl_permission_check() so it can be used in posix_acl_permission() forgetting them afterwards. This is a bit heavy handed but fairly straightforward otherwise. Link: https://github.com/brauner/mount-idmapped/issues/9 Link: https://lore.kernel.org/r/20220708090134.385160-2-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: linux-unionfs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-06-30vfs: fix copy_file_range() regression in cross-fs copiesAmir Goldstein
A regression has been reported by Nicolas Boichat, found while using the copy_file_range syscall to copy a tracefs file. Before commit 5dae222a5ff0 ("vfs: allow copy_file_range to copy across devices") the kernel would return -EXDEV to userspace when trying to copy a file across different filesystems. After this commit, the syscall doesn't fail anymore and instead returns zero (zero bytes copied), as this file's content is generated on-the-fly and thus reports a size of zero. Another regression has been reported by He Zhe - the assertion of WARN_ON_ONCE(ret == -EOPNOTSUPP) can be triggered from userspace when copying from a sysfs file whose read operation may return -EOPNOTSUPP. Since we do not have test coverage for copy_file_range() between any two types of filesystems, the best way to avoid these sort of issues in the future is for the kernel to be more picky about filesystems that are allowed to do copy_file_range(). This patch restores some cross-filesystem copy restrictions that existed prior to commit 5dae222a5ff0 ("vfs: allow copy_file_range to copy across devices"), namely, cross-sb copy is not allowed for filesystems that do not implement ->copy_file_range(). Filesystems that do implement ->copy_file_range() have full control of the result - if this method returns an error, the error is returned to the user. Before this change this was only true for fs that did not implement the ->remap_file_range() operation (i.e. nfsv3). Filesystems that do not implement ->copy_file_range() still fall-back to the generic_copy_file_range() implementation when the copy is within the same sb. This helps the kernel can maintain a more consistent story about which filesystems support copy_file_range(). nfsd and ksmbd servers are modified to fall-back to the generic_copy_file_range() implementation in case vfs_copy_file_range() fails with -EOPNOTSUPP or -EXDEV, which preserves behavior of server-side-copy. fall-back to generic_copy_file_range() is not implemented for the smb operation FSCTL_DUPLICATE_EXTENTS_TO_FILE, which is arguably a correct change of behavior. Fixes: 5dae222a5ff0 ("vfs: allow copy_file_range to copy across devices") Link: https://lore.kernel.org/linux-fsdevel/20210212044405.4120619-1-drinkcat@chromium.org/ Link: https://lore.kernel.org/linux-fsdevel/CANMq1KDZuxir2LM5jOTm0xx+BnvW=ZmpsG47CyHFJwnw7zSX6Q@mail.gmail.com/ Link: https://lore.kernel.org/linux-fsdevel/20210126135012.1.If45b7cdc3ff707bc1efa17f5366057d60603c45f@changeid/ Link: https://lore.kernel.org/linux-fsdevel/20210630161320.29006-1-lhenriques@suse.de/ Reported-by: Nicolas Boichat <drinkcat@chromium.org> Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Luis Henriques <lhenriques@suse.de> Fixes: 64bf5ff58dff ("vfs: no fallback for ->copy_file_range") Link: https://lore.kernel.org/linux-fsdevel/20f17f64-88cb-4e80-07c1-85cb96c83619@windriver.com/ Reported-by: He Zhe <zhe.he@windriver.com> Tested-by: Namjae Jeon <linkinjeon@kernel.org> Tested-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-25ksmbd: use vfs_llseek instead of dereferencing NULLJason A. Donenfeld
By not checking whether llseek is NULL, this might jump to NULL. Also, it doesn't check FMODE_LSEEK. Fix this by using vfs_llseek(), which always does the right thing. Fixes: f44158485826 ("cifsd: add file operations") Cc: stable@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: Ronnie Sahlberg <lsahlber@redhat.com> Cc: Hyunchul Lee <hyc.lee@gmail.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-06-23ksmbd: check invalid FileOffset and BeyondFinalZero in FSCTL_ZERO_DATANamjae Jeon
FileOffset should not be greater than BeyondFinalZero in FSCTL_ZERO_DATA. And don't call ksmbd_vfs_zero_data() if length is zero. Cc: stable@vger.kernel.org Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-06-23ksmbd: set the range of bytes to zero without extending file size in ↵Namjae Jeon
FSCTL_ZERO_DATA generic/091, 263 test failed since commit f66f8b94e7f2 ("cifs: when extending a file with falloc we should make files not-sparse"). FSCTL_ZERO_DATA sets the range of bytes to zero without extending file size. The VFS_FALLOCATE_FL_KEEP_SIZE flag should be used even on non-sparse files. Cc: stable@vger.kernel.org Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-06-23ksmbd: remove duplicate flag set in smb2_writeHyunchul Lee
The writethrough flag is set again if is_rdma_channel is false. Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-06-11ksmbd: smbd: Remove useless license text when SPDX-License-Identifier is ↵Christophe JAILLET
already used An SPDX-License-Identifier is already in place. There is no need to duplicate part of the corresponding license. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-06-11ksmbd: use SOCK_NONBLOCK type for kernel_accept()Namjae Jeon
I found that normally it is O_NONBLOCK but there are different value for some arch. /include/linux/net.h: #ifndef SOCK_NONBLOCK #define SOCK_NONBLOCK O_NONBLOCK #endif /arch/alpha/include/asm/socket.h: #define SOCK_NONBLOCK 0x40000000 Use SOCK_NONBLOCK instead of O_NONBLOCK for kernel_accept(). Suggested-by: David Howells <dhowells@redhat.com> Signed-off-by: Namjae Jeon <linkinjeon@kerne.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-27ksmbd: smbd: relax the count of sges requiredHyunchul Lee
Remove the condition that the count of sges must be greater than or equal to SMB_DIRECT_MAX_SEND_SGES(8). Because ksmbd needs sges only for SMB direct header, SMB2 transform header, SMB2 response, and optional payload. Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: fix outstanding credits related bugsHyunchul Lee
outstanding credits must be initialized to 0, because it means the sum of credits consumed by in-flight requests. And outstanding credits must be compared with total credits in smb2_validate_credit_charge(), because total credits are the sum of credits granted by ksmbd. This patch fix the following error, while frametest with Windows clients: Limits exceeding the maximum allowable outstanding requests, given : 128, pending : 8065 Fixes: b589f5db6d4a ("ksmbd: limits exceeding the maximum allowable outstanding requests") Cc: stable@vger.kernel.org Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Reported-by: Yufan Chen <wiz.chen@gmail.com> Tested-by: Yufan Chen <wiz.chen@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: smbd: fix connection dropped issueHyunchul Lee
When there are bursty connection requests, RDMA connection event handler is deferred and Negotiation requests are received even if connection status is NEW. To handle it, set the status to CONNECTED if Negotiation requests are received. Reported-by: Yufan Chen <wiz.chen@gmail.com> Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Tested-by: Yufan Chen <wiz.chen@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: Fix some kernel-doc commentsYang Li
Remove some warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. fs/ksmbd/misc.c:30: warning: Function parameter or member 'str' not described in 'match_pattern' fs/ksmbd/misc.c:30: warning: Excess function parameter 'string' description in 'match_pattern' fs/ksmbd/misc.c:163: warning: Function parameter or member 'share' not described in 'convert_to_nt_pathname' fs/ksmbd/misc.c:163: warning: Function parameter or member 'path' not described in 'convert_to_nt_pathname' fs/ksmbd/misc.c:163: warning: Excess function parameter 'filename' description in 'convert_to_nt_pathname' fs/ksmbd/misc.c:163: warning: Excess function parameter 'sharepath' description in 'convert_to_nt_pathname' fs/ksmbd/misc.c:259: warning: Function parameter or member 'share' not described in 'convert_to_unix_name' fs/ksmbd/misc.c:259: warning: Function parameter or member 'name' not described in 'convert_to_unix_name' fs/ksmbd/misc.c:259: warning: Excess function parameter 'path' description in 'convert_to_unix_name' fs/ksmbd/misc.c:259: warning: Excess function parameter 'tid' description in 'convert_to_unix_name' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: fix wrong smbd max read/write size checkNamjae Jeon
smb-direct max read/write size can be different with smb2 max read/write size. So smb2_read() can return error by wrong max read/write size check. This patch use smb_direct_max_read_write_size for this check in smb-direct read/write(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: add smbd max io size parameterNamjae Jeon
Add 'smbd max io size' parameter to adjust smbd-direct max read/write size. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: handle smb2 query dir request for OutputBufferLength that is too smallNamjae Jeon
We found the issue that ksmbd return STATUS_NO_MORE_FILES response even though there are still dentries that needs to be read while file read/write test using framtest utils. windows client send smb2 query dir request included OutputBufferLength(128) that is too small to contain even one entry. This patch make ksmbd immediately returns OutputBufferLength of response as zero to client. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: smbd: handle multiple Buffer descriptorsHyunchul Lee
Make ksmbd handle multiple buffer descriptors when reading and writing files using SMB direct: Post the work requests of rdma_rw_ctx for RDMA read/write in smb_direct_rdma_xmit(), and the work request for the READ/WRITE response with a remote invalidation in smb_direct_writev(). Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: smbd: change the return value of get_sg_listHyunchul Lee
Make get_sg_list return EINVAL if there aren't mapped scatterlists. Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: smbd: simplify tracking pending packetsHyunchul Lee
Because we don't have to tracking pending packets by dividing these into packets with payload and packets without payload, merge the tracking code. Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: smbd: introduce read/write credits for RDMA read/writeHyunchul Lee
SMB2_READ/SMB2_WRITE request has to be granted the number of rw credits, the pages the request wants to transfer / the maximum pages which can be registered with one MR to read and write a file. And allocate enough RDMA resources for the maximum number of rw credits allowed by ksmbd. Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-21ksmbd: smbd: change prototypes of RDMA read/write related functionsHyunchul Lee
Change the prototypes of RDMA read/write operations to accept a pointer and length of buffer descriptors. Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-09ksmbd: validate length in smb2_write()Marios Makassikis
The SMB2 Write packet contains data that is to be written to a file or to a pipe. Depending on the client, there may be padding between the header and the data field. Currently, the length is validated only in the case padding is present. Since the DataOffset field always points to the beginning of the data, there is no need to have a special case for padding. By removing this, the length is validated in both cases. Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-05-09ksmbd: fix reference count leak in smb_check_perm_dacl()Xin Xiong
The issue happens in a specific path in smb_check_perm_dacl(). When "id" and "uid" have the same value, the function simply jumps out of the loop without decrementing the reference count of the object "posix_acls", which is increased by get_acl() earlier. This may result in memory leaks. Fix it by decreasing the reference count of "posix_acls" before jumping to label "check_access_bits". Fixes: 777cad1604d6 ("ksmbd: remove select FS_POSIX_ACL in Kconfig") Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-14ksmbd: set fixed sector size to FS_SECTOR_SIZE_INFORMATIONNamjae Jeon
Currently ksmbd is using ->f_bsize from vfs_statfs() as sector size. If fat/exfat is a local share, ->f_bsize is a cluster size that is too large to be used as a sector size. Sector sizes larger than 4K cause problem occurs when mounting an iso file through windows client. The error message can be obtained using Mount-DiskImage command, the error is: "Mount-DiskImage : The sector size of the physical disk on which the virtual disk resides is not supported." This patch reports fixed 4KB sector size if ->s_blocksize is bigger than 4KB. Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-14ksmbd: increment reference count of parent fpNamjae Jeon
Add missing increment reference count of parent fp in ksmbd_lookup_fd_inode(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-14ksmbd: remove filename in ksmbd_fileNamjae Jeon
If the filename is change by underlying rename the server, fp->filename and real filename can be different. This patch remove the uses of fp->filename in ksmbd and replace it with d_path(). Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-04-01Merge tag '5.18-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull ksmbd updates from Steve French: - three cleanup fixes - shorten module load warning - two documentation fixes * tag '5.18-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: replace usage of found with dedicated list iterator variable ksmbd: Remove a redundant zeroing of memory MAINTAINERS: ksmbd: switch Sergey to reviewer ksmbd: shorten experimental warning on loading the module ksmbd: use netif_is_bridge_port Documentation: ksmbd: update Feature Status table
2022-04-01Merge tag '5.18-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull more cifs updates from Steve French: - three fixes for big endian issues in how Persistent and Volatile file ids were stored - Various misc. fixes: including some for oops, 2 for ioctls, 1 for writeback - cleanup of how tcon (tree connection) status is tracked - Four changesets to move various duplicated protocol definitions (defined both in cifs.ko and ksmbd) into smbfs_common/smb2pdu.h - important performance improvement to use cached handles in some key compounding code paths (reduces numbers of opens/closes sent in some workloads) - fix to allow alternate DFS target to be used to retry on a failed i/o * tag '5.18-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix NULL ptr dereference in smb2_ioctl_query_info() cifs: prevent bad output lengths in smb2_ioctl_query_info() smb3: fix ksmbd bigendian bug in oplock break, and move its struct to smbfs_common smb3: cleanup and clarify status of tree connections smb3: move defines for query info and query fsinfo to smbfs_common smb3: move defines for ioctl protocol header and SMB2 sizes to smbfs_common [smb3] move more common protocol header definitions to smbfs_common cifs: fix incorrect use of list iterator after the loop ksmbd: store fids as opaque u64 integers cifs: fix bad fids sent over wire cifs: change smb2_query_info_compound to use a cached fid, if available cifs: convert the path to utf16 in smb2_query_info_compound cifs: writeback fix cifs: do not skip link targets when an I/O fails
2022-03-31smb3: fix ksmbd bigendian bug in oplock break, and move its struct to ↵Steve French
smbfs_common Fix an endian bug in ksmbd for one remaining use of Persistent/VolatileFid that unnecessarily converted it (it is an opaque endian field that does not need to be and should not be converted) in oplock_break for ksmbd, and move the definitions for the oplock and lease break protocol requests and responses to fs/smbfs_common/smb2pdu.h Also move a few more definitions for various protocol requests that were duplicated (in fs/cifs/smb2pdu.h and fs/ksmbd/smb2pdu.h) into fs/smbfs_common/smb2pdu.h including: - various ioctls and reparse structures - validate negotiate request and response structs - duplicate extents structs Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-03-30ksmbd: replace usage of found with dedicated list iterator variableJakob Koschel
To move the list iterator variable into the list_for_each_entry_*() macro in the future it should be avoided to use the list iterator variable after the loop body. To *never* use the list iterator variable after the loop it was concluded to use a separate iterator variable instead of a found boolean [1]. This removes the need to use a found variable and simply checking if the variable was set, can determine if the break/goto was hit. Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-03-30ksmbd: Remove a redundant zeroing of memoryChristophe JAILLET
fill_transform_hdr() has only one caller that already clears tr_buf (it is kzalloc'ed). So there is no need to clear it another time here. Remove the superfluous memset() and add a comment to remind that the caller must clear the buffer. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Hyunchul Lee <hyc.lee@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-03-30ksmbd: shorten experimental warning on loading the moduleSteve French
ksmbd is continuing to improve. Shorten the warning message logged the first time it is loaded to: "The ksmbd server is experimental" Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-03-26smb3: move defines for query info and query fsinfo to smbfs_commonSteve French
Includes moving to common code (from cifs and ksmbd protocol related headers) - query and query directory info levels and structs - set info structs - SMB2 lock struct and flags - SMB2 echo req Also shorten a few flag names (e.g. SMB2_LOCKFLAG_EXCLUSIVE_LOCK to SMB2_LOCKFLAG_EXCLUSIVE) Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-03-26smb3: move defines for ioctl protocol header and SMB2 sizes to smbfs_commonSteve French
The definitions for the ioctl SMB3 request and response as well as length of various fields defined in the protocol documentation were duplicated in fs/ksmbd and fs/cifs. Move these to the common code in fs/smbfs_common/smb2pdu.h Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-03-25[smb3] move more common protocol header definitions to smbfs_commonSteve French
We have duplicated definitions for various SMB3 PDUs in fs/ksmbd and fs/cifs. Some had already been moved to fs/smbfs_common/smb2pdu.h Move definitions for - error response - query info and various related protocol flags - various lease handling flags and the create lease context to smbfs_common/smb2pdu.h to reduce code duplication Reviewed-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-13 19:51:21 +0000