summaryrefslogtreecommitdiff
path: root/fs/squashfs/dir.c
AgeCommit message (Collapse)Author
2013-09-06Squashfs: add corruption check for type in squashfs_readdir()Phillip Lougher
We read the type field from disk. This value should be sanity checked for correctness to avoid an out of bounds access when reading the squashfs_filetype_table array. Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2013-09-06Squashfs: add corruption check in get_dir_index_using_offset()Phillip Lougher
We read the size (of the name) field from disk. This value should be sanity checked for correctness to avoid blindly reading huge amounts of unnecessary data from disk on corruption. Note, here we're not actually reading the name into a buffer, but skipping it, and so corruption doesn't cause buffer overflow, merely lots of unnecessary amounts of data to be read. Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2013-09-06Squashfs: fix corruption checks in squashfs_readdir()Phillip Lougher
The dir_count and size fields when read from disk are sanity checked for correctness. However, the sanity checks only check the values are not greater than expected. As dir_count and size were incorrectly defined as signed ints, this can lead to corrupted values appearing as negative which are not trapped. Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2013-06-29[readdir] convert squashfsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-10Squashfs: fix f_pos check in get_dir_index_using_offsetPhillip Lougher
One off error in the f_pos check. If f_pos is 3 or less don't bother reading the index because we're at the start of the directory, and we obviously already know where that is on disk. This eliminates an unnecessary read. Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2012-03-10Squashfs: remove redundant length initialisation in squashfs_readdirPhillip Lougher
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2012-03-10Squashfs: use define instead of constantAjeet Yadav
Its better to use defined name instead of constant Signed-off-by: Ajeet Yadav <ajeet.yadav.77@gmail.com> Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
2011-05-26Squashfs: update email addressPhillip Lougher
My existing email address may stop working in a month or two, so update email to one that will continue working. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2011-03-16Squashfs: handle corruption of directory structurePhillip Lougher
Handle the rare case where a directory metadata block is uncompressed and corrupted, leading to a kernel oops in directory scanning (memcpy). Normally corruption is detected at the decompression stage and dealt with then, however, this will not happen if: - metadata isn't compressed (users can optionally request no metadata compression), or - the compressed metadata block was larger than the original, in which case the uncompressed version was used, or - the data was corrupt after decompression This patch fixes this by adding some sanity checks against known maximum values. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-01-20Squashfs: factor out remaining zlib dependencies into separate wrapper filePhillip Lougher
Move zlib buffer init/destroy code into separate wrapper file. Also make zlib z_stream field a void * removing the need to include zlib.h for most files. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2009-01-05Squashfs: directory readdir operationsPhillip Lougher
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>