summaryrefslogtreecommitdiff
path: root/fs/xfs/libxfs/xfs_ialloc.c
AgeCommit message (Collapse)Author
2021-12-15xfs: apply noalloc mode to inode allocations toonoalloc-ags_2021-12-15Darrick J. Wong
Don't allow inode allocations from this group if it's marked noalloc. Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-12-15xfs: convert "skip_discard" to a proper flags bitsetextfree-intent-cleanups_2021-12-15Darrick J. Wong
Convert the boolean to skip discard on free into a proper flags field so that we can add more flags in the next patch. Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-12-15xfs: standardize the btree maxrecs function parametersDarrick J. Wong
Standardize the parameters in xfs_{alloc,bm,ino,rmap,refcount}bt_maxrecs so that we have consistent calling conventions. This doesn't affect the kernel that much, but enables us to clean up userspace a bit. Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-12-15xfs: disable the agi rotor for metadata inodesDarrick J. Wong
Ideally, we'd put all the metadata inodes in one place if we could, so that the metadata all stay reasonably close together instead of spreading out over the disk. Furthermore, if the log is internal we'd probably prefer to keep the metadata near the log. Therefore, disable AGI rotoring for metadata inode allocations. Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-12-15xfs: split new inode creation into two piecesDarrick J. Wong
There are two parts to initializing a newly allocated inode: setting up the incore structures, and initializing the new inode core based on the parent inode and the current user's environment. The initialization code is not specific to the kernel, so we would like to share that with userspace by hoisting it to libxfs. Therefore, split xfs_icreate into separate functions to prepare for the next few patches. Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-12-15xfs: report XFS_CORRUPT_ON errors to the health systemcorruption-health-reports_2021-12-15Darrick J. Wong
Whenever we encounter XFS_CORRUPT_ON failures, we should report that to the health monitoring system for later reporting. I started with this and massaged everything until it built: @@ expression mp, test; @@ - if (XFS_CORRUPT_ON(mp, test)) return -EFSCORRUPTED; + if (XFS_CORRUPT_ON(mp, test)) { xfs_btree_mark_sick(cur); return -EFSCORRUPTED; } @@ expression mp, test; identifier label, error; @@ - if (XFS_CORRUPT_ON(mp, test)) { error = -EFSCORRUPTED; goto label; } + if (XFS_CORRUPT_ON(mp, test)) { xfs_btree_mark_sick(cur); error = -EFSCORRUPTED; goto label; } Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-12-15xfs: report btree block corruption errors to the health systemDarrick J. Wong
Whenever we encounter corrupt btree blocks, we should report that to the health monitoring system for later reporting. Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-12-15xfs: report ag header corruption errors to the health tracking systemDarrick J. Wong
Whenever we encounter a corrupt AG header, we should report that to the health monitoring system for later reporting. Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-12-15xfs: repair inode btreesDarrick J. Wong
Use the rmapbt to find inode chunks, query the chunks to compute hole and free masks, and with that information rebuild the inobt and finobt. Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-10-22xfs: rename xfs_bmap_add_free to xfs_free_extent_laterDarrick J. Wong
xfs_bmap_add_free isn't a block mapping function; it schedules deferred freeing operations for a later point in a compound transaction chain. While it's primarily used by bunmapi, its use has expanded beyond that. Move it to xfs_alloc.c and rename the function since it's now general freeing functionality. Bring the slab cache bits in line with the way we handle the other intent items. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
2021-10-19xfs: compute absolute maximum nlevels for each btree typeDarrick J. Wong
Add code for all five btree types so that we can compute the absolute maximum possible btree height for each btree type. This is a setup for the next patch, which makes every btree type have its own cursor cache. The functions are exported so that we can have xfs_db report the absolute maximum btree heights for each btree type, rather than making everyone run their own ad-hoc computations. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2021-08-19xfs: kill xfs_sb_version_has_v3inode()Dave Chinner
All callers to xfs_dinode_good_version() and XFS_DINODE_SIZE() in both the kernel and userspace have a xfs_mount structure available which means they can use mount features checks instead looking directly are the superblock. Convert these functions to take a mount and use a xfs_has_v3inodes() check and move it out of the libxfs/xfs_format.h file as it really doesn't have anything to do with the definition of the on-disk format. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19xfs: convert xfs_sb_version_has checks to use mount featuresDave Chinner
This is a conversion of the remaining xfs_sb_version_has..(sbp) checks to use xfs_has_..(mp) feature checks. This was largely done with a vim replacement macro that did: :0,$s/xfs_sb_version_has\(.*\)&\(.*\)->m_sb/xfs_has_\1\2/g<CR> A couple of other variants were also used, and the rest touched up by hand. $ size -t fs/xfs/built-in.a text data bss dec hex filename before 1127533 311352 484 1439369 15f689 (TOTALS) after 1125360 311352 484 1437196 15ee0c (TOTALS) Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19xfs: replace XFS_FORCED_SHUTDOWN with xfs_is_shutdownDave Chinner
Remove the shouty macro and instead use the inline function that matches other state/feature check wrapper naming. This conversion was done with sed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19xfs: convert mount flags to featuresDave Chinner
Replace m_flags feature checks with xfs_has_<feature>() calls and rework the setup code to set flags in m_features. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19xfs: replace xfs_sb_version checks with feature flag checksDave Chinner
Convert the xfs_sb_version_hasfoo() to checks against mp->m_features. Checks of the superblock itself during disk operations (e.g. in the read/write verifiers and the to/from disk formatters) are not converted - they operate purely on the superblock state. Everything else should use the mount features. Large parts of this conversion were done with sed with commands like this: for f in `git grep -l xfs_sb_version_has fs/xfs/*.c`; do sed -i -e 's/xfs_sb_version_has\(.*\)(&\(.*\)->m_sb)/xfs_has_\1(\2)/' $f done With manual cleanups for things like "xfs_has_extflgbit" and other little inconsistencies in naming. The result is ia lot less typing to check features and an XFS binary size reduced by a bit over 3kB: $ size -t fs/xfs/built-in.a text data bss dec hex filenam before 1130866 311352 484 1442702 16038e (TOTALS) after 1127727 311352 484 1439563 15f74b (TOTALS) Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-18xfs: make the record pointer passed to query_range functions constDarrick J. Wong
The query_range functions are supposed to call a caller-supplied function on each record found in the dataset. These functions don't own the memory storing the record, so don't let them change the record. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-08-09xfs: fix silly whitespace problems with kernel libxfsDarrick J. Wong
Fix a few whitespace errors such as spaces at the end of the line, etc. This gets us back to something more closely resembling parity. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2021-07-15xfs: check for sparse inode clusters that cross new EOAG when shrinkingDarrick J. Wong
While running xfs/168, I noticed occasional write verifier shutdowns involving inodes at the very end of the filesystem. Existing inode btree validation code checks that all inode clusters are fully contained within the filesystem. However, due to inadequate checking in the fs shrink code, it's possible that there could be a sparse inode cluster at the end of the filesystem where the upper inodes of the cluster are marked as holes and the corresponding blocks are free. In this case, the last blocks in the AG are listed in the bnobt. This enables the shrink to proceed but results in a filesystem that trips the inode verifiers. Fix this by disallowing the shrink. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2021-06-18xfs: perag may be null in xfs_imap()Dave Chinner
Dan Carpenter's static checker reported: The patch 7b13c5155182: "xfs: use perag for ialloc btree cursors" from Jun 2, 2021, leads to the following Smatch complaint: fs/xfs/libxfs/xfs_ialloc.c:2403 xfs_imap() error: we previously assumed 'pag' could be null (see line 2294) And it's right. Fix it. Fixes: 7b13c5155182 ("xfs: use perag for ialloc btree cursors") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
2021-06-08xfs: drop the AGI being passed to xfs_check_agi_freecountDave Chinner
From: Dave Chinner <dchinner@redhat.com> Stephen Rothwell reported this compiler warning from linux-next: fs/xfs/libxfs/xfs_ialloc.c: In function 'xfs_difree_finobt': fs/xfs/libxfs/xfs_ialloc.c:2032:20: warning: unused variable 'agi' [-Wunused-variable] 2032 | struct xfs_agi *agi = agbp->b_addr; Which is fallout from agno -> perag conversions that were done in this function. xfs_check_agi_freecount() is the only user of "agi" in xfs_difree_finobt() now, and it only uses the agi to get the current free inode count. We hold that in the perag structure, so there's not need to directly reference the raw AGI to get this information. The btree cursor being passed to xfs_check_agi_freecount() has a reference to the perag being operated on, so use that directly in xfs_check_agi_freecount() rather than passing an AGI. Fixes: 7b13c5155182 ("xfs: use perag for ialloc btree cursors") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02xfs: use perag through unlink processingDave Chinner
Unlinked lists are held in the perag, and freeing of inodes needs to be passed a perag, too, so look up the perag early in the unlink processing and use it throughout. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com>
2021-06-02xfs: clean up and simplify xfs_dialloc()Dave Chinner
Because it's a mess. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02xfs: inode allocation can use a single perag instanceDave Chinner
Now that we've internalised the two-phase inode allocation, we can now easily make the AG selection and allocation atomic from the perspective of a single perag context. This will ensure AGs going offline/away cannot occur between the selection and allocation steps. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02xfs: get rid of xfs_dir_ialloc()Dave Chinner
This is just a simple wrapper around the per-ag inode allocation that doesn't need to exist. The internal mechanism to select and allocate within an AG does not need to be exposed outside xfs_ialloc.c, and it being exposed simply makes it harder to follow the code and simplify it. This is simplified by internalising xf_dialloc_select_ag() and xfs_dialloc_ag() into a single xfs_dialloc() function and then xfs_dir_ialloc() can go away. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02xfs: collapse AG selection for inode allocationDave Chinner
xfs_dialloc_select_ag() does a lot of repetitive work. It first calls xfs_ialloc_ag_select() to select the AG to start allocation attempts in, which can do up to two entire loops across the perags that inodes can be allocated in. This is simply checking if there is spce available to allocate inodes in an AG, and it returns when it finds the first candidate AG. xfs_dialloc_select_ag() then does it's own iterative walk across all the perags locking the AGIs and trying to allocate inodes from the locked AG. It also doesn't limit the search to mp->m_maxagi, so it will walk all AGs whether they can allocate inodes or not. Hence if we are really low on inodes, we could do almost 3 entire walks across the whole perag range before we find an allocation group we can allocate inodes in or report ENOSPC. Because xfs_ialloc_ag_select() returns on the first candidate AG it finds, we can simply do these checks directly in xfs_dialloc_select_ag() before we lock and try to allocate inodes. This reduces the inode allocation pass down to 2 perag sweeps at most - one for aligned inode cluster allocation and if we can't allocate full, aligned inode clusters anywhere we'll do another pass trying to do sparse inode cluster allocation. This also removes a big chunk of duplicate code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02xfs: simplify xfs_dialloc_select_ag() return valuesDave Chinner
The only caller of xfs_dialloc_select_ag() will always return -ENOSPC to it's caller if the agbp returned from xfs_dialloc_select_ag() is NULL. IOWs, failure to find a candidate AGI we can allocate inodes from is always an ENOSPC condition, so move this logic up into xfs_dialloc_select_ag() so we can simplify the return logic in this function. xfs_dialloc_select_ag() now only ever returns 0 with a locked agbp, or an error with no agbp. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02xfs: remove agno from btree cursorDave Chinner
Now that everything passes a perag, the agno is not needed anymore. Convert all the users to use pag->pag_agno instead and remove the agno from the cursor. This was largely done as an automated search and replace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02xfs: use perag for ialloc btree cursorsDave Chinner
Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-06-02xfs: add a perag to the btree cursorDave Chinner
Which will eventually completely replace the agno in it. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com>
2021-06-02xfs: move xfs_perag_get/put to xfs_ag.[ch]Dave Chinner
They are AG functions, not superblock functions, so move them to the appropriate location. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-03-25xfs: validate ag btree levels using the precomputed valuesDarrick J. Wong
Use the AG btree height limits that we precomputed into the xfs_mount to validate the AG headers instead of using XFS_BTREE_MAXLEVELS. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-12-16xfs: remove xfs_buf_t typedefxfs-5.11-merge-4Dave Chinner
Prepare for kernel xfs_buf alignment by getting rid of the xfs_buf_t typedef from userspace. [darrick: This patch is a port of a userspace patch removing the xfs_buf_t typedef in preparation to make the userspace xfs_buf code behave more like its kernel counterpart.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-12-12xfs: kill ialloced in xfs_dialloc()Gao Xiang
It's enough to just use return code, and get rid of an argument. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-12-12xfs: spilt xfs_dialloc() into 2 functionsDave Chinner
This patch explicitly separates free inode chunk allocation and inode allocation into two individual high level operations. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-12-12xfs: move xfs_dialloc_roll() into xfs_dialloc()Dave Chinner
Get rid of the confusing ialloc_context and failure handling around xfs_dialloc() by moving xfs_dialloc_roll() into xfs_dialloc(). Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-12-12xfs: introduce xfs_dialloc_roll()Dave Chinner
Introduce a helper to make the on-disk inode allocation rolling logic clearer in preparation of the following cleanup. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-12-12xfs: convert noroom, okalloc in xfs_dialloc() to boolGao Xiang
Boolean is preferred for such use. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-09-15xfs: widen ondisk inode timestamps to deal with y2038+Darrick J. Wong
Redesign the ondisk inode timestamps to be a simple unsigned 64-bit counter of nanoseconds since 14 Dec 1901 (i.e. the minimum time in the 32-bit unix time epoch). This enables us to handle dates up to 2486, which solves the y2038 problem. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Gao Xiang <hsiangkao@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-09-15xfs: store inode btree block counts in AGI headerDarrick J. Wong
Add a btree block usage counters for both inode btrees to the AGI header so that we don't have to walk the entire finobt at mount time to create the per-AG reservations. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-08-26xfs: fix off-by-one in inode alloc block reservation calculationBrian Foster
The inode chunk allocation transaction reserves inobt_maxlevels-1 blocks to accommodate a full split of the inode btree. A full split requires an allocation for every existing level and a new root block, which means inobt_maxlevels is the worst case block requirement for a transaction that inserts to the inobt. This can lead to a transaction block reservation overrun when tmpfile creation allocates an inode chunk and expands the inobt to its maximum depth. This problem has been observed in conjunction with overlayfs, which makes frequent use of tmpfiles internally. The existing reservation code goes back as far as the Linux git repo history (v2.6.12). It was likely never observed as a problem because the traditional file/directory creation transactions also include worst case block reservation for directory modifications, which most likely is able to make up for a single block deficiency in the inode allocation portion of the calculation. tmpfile support is relatively more recent (v3.15), less heavily used, and only includes the inode allocation block reservation as tmpfiles aren't linked into the directory tree on creation. Fix up the inode alloc block reservation macro and a couple of the block allocator minleft parameters that enforce an allocation to leave enough free blocks in the AG for a full inobt split. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-07-14xfs: get rid of unnecessary xfs_perag_{get,put} pairsGao Xiang
In the course of some operations, we look up the perag from the mount multiple times to get or change perag information. These are often very short pieces of code, so while the lookup cost is generally low, the cost of the lookup is far higher than the cost of the operation we are doing on the perag. Since we changed buffers to hold references to the perag they are cached in, many modification contexts already hold active references to the perag that are held across these operations. This is especially true for any operation that is serialised by an allocation group header buffer. In these cases, we can just use the buffer's reference to the perag to avoid needing to do lookups to access the perag. This means that many operations don't need to do perag lookups at all to access the perag because they've already looked up objects that own persistent references and hence can use that reference instead. Cc: Dave Chinner <dchinner@redhat.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Signed-off-by: Gao Xiang <hsiangkao@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-19xfs: only check the superblock version for dinode size calculationChristoph Hellwig
The size of the dinode structure is only dependent on the file system version, so instead of checking the individual inode version just use the newly added xfs_sb_version_has_large_dinode helper, and simplify various calling conventions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-19xfs: add a new xfs_sb_version_has_v3inode helperChristoph Hellwig
Add a new wrapper to check if a file system supports the v3 inode format with a larger dinode core. Previously we used xfs_sb_version_hascrc for that, which is technically correct but a little confusing to read. Also move xfs_dinode_good_version next to xfs_sb_version_has_v3inode so that we have one place that documents the superblock version to inode version relationship. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-13xfs: convert btree cursor ag-private member nameDave Chinner
bc_private.a -> bc_ag conversion via script: `sed -i 's/bc_private\.a/bc_ag/g' fs/xfs/*[ch] fs/xfs/*/*[ch]` And then revert the change to the bc_ag #define in fs/xfs/libxfs/xfs_btree.h manually. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-03-11xfs: remove XFS_BUF_TO_AGIChristoph Hellwig
Just dereference bp->b_addr directly and make the code a little simpler and more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-01-26xfs: make xfs_trans_get_buf return an error codeDarrick J. Wong
Convert xfs_trans_get_buf() to return numeric error codes like most everywhere else in xfs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-12-19xfs: don't commit sunit/swidth updates to disk if that would cause repair ↵xfs-5.5-fixes-1Darrick J. Wong
failures Alex Lyakas reported[1] that mounting an xfs filesystem with new sunit and swidth values could cause xfs_repair to fail loudly. The problem here is that repair calculates the where mkfs should have allocated the root inode, based on the superblock geometry. The allocation decisions depend on sunit, which means that we really can't go updating sunit if it would lead to a subsequent repair failure on an otherwise correct filesystem. Port from xfs_repair some code that computes the location of the root inode and teach mount to skip the ondisk update if it would cause problems for repair. Along the way we'll update the documentation, provide a function for computing the minimum AGFL size instead of open-coding it, and cut down some indenting in the mount code. Note that we allow the mount to proceed (and new allocations will reflect this new geometry) because we've never screened this kind of thing before. We'll have to wait for a new future incompat feature to enforce correct behavior, alas. Note that the geometry reporting always uses the superblock values, not the incore ones, so that is what xfs_info and xfs_growfs will report. [1] https://lore.kernel.org/linux-xfs/20191125130744.GA44777@bfoster/T/#m00f9594b511e076e2fcdd489d78bc30216d72a7d Reported-by: Alex Lyakas <alex@zadara.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-11-12xfs: kill the XFS_WANT_CORRUPT_* macrosDarrick J. Wong
The XFS_WANT_CORRUPT_* macros conceal subtle side effects such as the creation of local variables and redirections of the code flow. This is pretty ugly, so replace them with explicit XFS_IS_CORRUPT tests that remove both of those ugly points. The change was performed with the following coccinelle script: @@ expression mp, test; identifier label; @@ - XFS_WANT_CORRUPTED_GOTO(mp, test, label); + if (XFS_IS_CORRUPT(mp, !test)) { error = -EFSCORRUPTED; goto label; } @@ expression mp, test; @@ - XFS_WANT_CORRUPTED_RETURN(mp, test); + if (XFS_IS_CORRUPT(mp, !test)) return -EFSCORRUPTED; @@ expression mp, lval, rval; @@ - XFS_IS_CORRUPT(mp, !(lval == rval)) + XFS_IS_CORRUPT(mp, lval != rval) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 && e2)) + XFS_IS_CORRUPT(mp, !e1 || !e2) @@ expression e1, e2; @@ - !(e1 == e2) + e1 != e2 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 && e3 == e4) || e5 != e6 + e1 != e2 || e3 != e4 || e5 != e6 @@ expression e1, e2, e3, e4, e5, e6; @@ - !(e1 == e2 || (e3 <= e4 && e5 <= e6)) + e1 != e2 && (e3 > e4 || e5 > e6) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2)) + XFS_IS_CORRUPT(mp, e1 > e2) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 < e2)) + XFS_IS_CORRUPT(mp, e1 >= e2) @@ expression mp, e1; @@ - XFS_IS_CORRUPT(mp, !!e1) + XFS_IS_CORRUPT(mp, e1) @@ expression mp, e1, e2; @@ - XFS_IS_CORRUPT(mp, !(e1 || e2)) + XFS_IS_CORRUPT(mp, !e1 && !e2) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 == e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 != e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 <= e2) || !(e3 >= e4)) + XFS_IS_CORRUPT(mp, e1 > e2 || e3 < e4) @@ expression mp, e1, e2, e3, e4; @@ - XFS_IS_CORRUPT(mp, !(e1 == e2) && !(e3 <= e4)) + XFS_IS_CORRUPT(mp, e1 != e2 && e3 > e4) Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-08-28xfs: fix maxicount division by zero errorDarrick J. Wong
In xfs_ialloc_setup_geometry, it's possible for a malicious/corrupt fs image to set an unreasonably large value for sb_inopblog which will cause ialloc_blks to be zero. If sb_imax_pct is also set, this results in a division by zero error in the second do_div call. Therefore, force maxicount to zero if ialloc_blks is zero. Note that the kernel metadata verifiers will catch the garbage inopblog value and abort the fs mount long before it tries to set up the inode geometry; this is needed to avoid a crash in xfs_db while setting up the xfs_mount structure. Found by fuzzing sb_inopblog to 122 in xfs/350. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-02 12:46:28 +0000