summaryrefslogtreecommitdiff
path: root/fs/xfs/xfs_dquot.c
AgeCommit message (Collapse)Author
2013-06-06xfs: rework dquot CRCsDave Chinner
Calculating dquot CRCs when the backing buffer is written back just doesn't work reliably. There are several places which manipulate dquots directly in the buffers, and they don't calculate CRCs appropriately, nor do they always set the buffer up to calculate CRCs appropriately. Firstly, if we log a dquot buffer (e.g. during allocation) it gets logged without valid CRC, and so on recovery we end up with a dquot that is not valid. Secondly, if we recover/repair a dquot, we don't have a verifier attached to the buffer and hence CRCs are not calculated on the way down to disk. Thirdly, calculating the CRC after we've changed the contents means that if we re-read the dquot from the buffer, we cannot verify the contents of the dquot are valid, as the CRC is invalid. So, to avoid all the dquot CRC errors that are being detected by the read verifier, change to using the same model as for inodes. That is, dquot CRCs are calculated and written to the backing buffer at the time the dquot is flushed to the backing buffer. If we modify the dquot directly in the backing buffer, calculate the CRC immediately after the modification is complete. Hence the dquot in the on-disk buffer should always have a valid CRC. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 6fcdc59de28817d1fbf1bd58cc01f4f3fac858fb)
2013-04-21xfs: add CRC checks for quota blocksChristoph Hellwig
Use the reserved space in struct xfs_dqblk to store a UUID and a crc for the quota blocks. [dchinner@redhat.com] Add a LSN field and update for current verifier infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-03-22xfs: xfs_dquot prealloc throttling watermarks and low free spaceBrian Foster
Enable tracking of high and low watermarks for preallocation throttling of files under quota restrictions. These values are calculated when the quota limit is read from disk or modified and cached for later use by the throttling algorithm. The high watermark specifies when preallocation is disabled, the low watermark specifies when throttling is enabled and the low free space data structure contains precalculated low free space limits to serve as input to determine the level of throttling required. Note that the low free space data structure is based on the existing global low free space data structure with the exception of using three stages (5%, 3% and 1%) rather than five to reduce the impact of xfs_dquot memory overhead. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-03-22xfs: pass xfs_dquot to xfs_qm_adjust_dqlimits() instead of xfs_disk_dquot_tBrian Foster
Modify xfs_qm_adjust_dqlimits() to take the xfs_dquot as a parameter instead of just the xfs_disk_dquot_t so we can update in-memory fields if necessary. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-02-01xfs: calculate XFS_TRANS_QM_DQALLOC space log reservation at mount timeJeff Liu
The disk quota allocation log space reservation is calcuated at runtime, this patch does it at mount time. Signed-off-by: Jie Liu <jeff.liu@oracle.com> CC: Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15xfs: convert buffer verifiers to an ops structure.Dave Chinner
To separate the verifiers from iodone functions and associate read and write verifiers at the same time, introduce a buffer verifier operations structure to the xfs_buf. This avoids the need for assigning the write verifier, clearing the iodone function and re-running ioend processing in the read verifier, and gets rid of the nasty "b_pre_io" name for the write verifier function pointer. If we ever need to, it will also be easier to add further content specific callbacks to a buffer with an ops structure in place. We also avoid needing to export verifier functions, instead we can simply export the ops structures for those that are needed outside the function they are defined in. This patch also fixes a directory block readahead verifier issue it exposed. This patch also adds ops callbacks to the inode/alloc btree blocks initialised by growfs. These will need more work before they will work with CRCs. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15xfs: connect up write verifiers to new buffersDave Chinner
Metadata buffers that are read from disk have write verifiers already attached to them, but newly allocated buffers do not. Add appropriate write verifiers to all new metadata buffers. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15xfs: add pre-write metadata buffer verifier callbacksDave Chinner
These verifiers are essentially the same code as the read verifiers, but do not require ioend processing. Hence factor the read verifier functions and add a new write verifier wrapper that is used as the callback. This is done as one large patch for all verifiers rather than one patch per verifier as the change is largely mechanical. This includes hooking up the write verifier via the read verifier function. Hooking up the write verifier for buffers obtained via xfs_trans_get_buf() will be done in a separate patch as that touches code in many different places rather than just the verifier functions. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15xfs: verify dquot blocks as they are read from diskDave Chinner
Add a dquot buffer verify callback function and pass it into the buffer read functions. This checks all the dquots in a buffer, but cannot completely verify the dquot ids are correct. Also, errors cannot be repaired, so an additional function is added to repair bad dquots in the buffer if such an error is detected in a context where repair is allowed. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-15xfs: make buffer read verication an IO completion functionDave Chinner
Add a verifier function callback capability to the buffer read interfaces. This will be used by the callers to supply a function that verifies the contents of the buffer when it is read from disk. This patch does not provide callback functions, but simply modifies the interfaces to allow them to be called. The reason for adding this to the read interfaces is that it is very difficult to tell fom the outside is a buffer was just read from disk or whether we just pulled it out of cache. Supplying a callbck allows the buffer cache to use it's internal knowledge of the buffer to execute it only when the buffer is read from disk. It is intended that the verifier functions will mark the buffer with an EFSCORRUPTED error when verification fails. This allows the reading context to distinguish a verification error from an IO error, and potentially take further actions on the buffer (e.g. attempt repair) based on the error reported. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Phil White <pwhite@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14xfs: move xfsagino_t to xfs_types.hDave Chinner
Untangle the header file includes a bit by moving the definition of xfs_agino_t to xfs_types.h. This removes the dependency that xfs_ag.h has on xfs_inum.h, meaning we don't need to include xfs_inum.h everywhere we include xfs_ag.h. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14xfs: pass shutdown method into xfs_trans_ail_delete_bulkDave Chinner
xfs_trans_ail_delete_bulk() can be called from different contexts so if the item is not in the AIL we need different shutdown for each context. Pass in the shutdown method needed so the correct action can be taken. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14xfs: on-stack delayed write buffer listsChristoph Hellwig
Queue delwri buffers on a local on-stack list instead of a per-buftarg one, and write back the buffers per-process instead of by waking up xfsbufd. This is now easily doable given that we have very few places left that write delwri buffers: - log recovery: Only done at mount time, and already forcing out the buffers synchronously using xfs_flush_buftarg - quotacheck: Same story. - dquot reclaim: Writes out dirty dquots on the LRU under memory pressure. We might want to look into doing more of this via xfsaild, but it's already more optimal than the synchronous inode reclaim that writes each buffer synchronously. - xfsaild: This is the main beneficiary of the change. By keeping a local list of buffers to write we reduce latency of writing out buffers, and more importably we can remove all the delwri list promotions which were hitting the buffer cache hard under sustained metadata loads. The implementation is very straight forward - xfs_buf_delwri_queue now gets a new list_head pointer that it adds the delwri buffers to, and all callers need to eventually submit the list using xfs_buf_delwi_submit or xfs_buf_delwi_submit_nowait. Buffers that already are on a delwri list are skipped in xfs_buf_delwri_queue, assuming they already are on another delwri list. The biggest change to pass down the buffer list was done to the AIL pushing. Now that we operate on buffers the trylock, push and pushbuf log item methods are merged into a single push routine, which tries to lock the item, and if possible add the buffer that needs writeback to the buffer list. This leads to much simpler code than the previous split but requires the individual IOP_PUSH instances to unlock and reacquire the AIL around calls to blocking routines. Given that xfsailds now also handle writing out buffers, the conditions for log forcing and the sleep times needed some small changes. The most important one is that we consider an AIL busy as long we still have buffers to push, and the other one is that we do increment the pushed LSN for buffers that are under flushing at this moment, but still count them towards the stuck items for restart purposes. Without this we could hammer on stuck items without ever forcing the log and not make progress under heavy random delete workloads on fast flash storage devices. [ Dave Chinner: - rebase on previous patches. - improved comments for XBF_DELWRI_Q handling - fix XBF_ASYNC handling in queue submission (test 106 failure) - rename delwri submit function buffer list parameters for clarity - xfs_efd_item_push() should return XFS_ITEM_PINNED ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14xfs: do not write the buffer from xfs_qm_dqflushChristoph Hellwig
Instead of writing the buffer directly from inside xfs_qm_dqflush return it to the caller and let the caller decide what to do with the buffer. Also remove the pincount check in xfs_qm_dqflush that all non-blocking callers already implement and the now unused flags parameter and the XFS_DQ_IS_DIRTY check that all callers already perform. [ Dave Chinner: fixed build error cause by missing '{'. ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14xfs: remove log item from AIL in xfs_iflush after a shutdownChristoph Hellwig
If a filesystem has been forced shutdown we are never going to write inodes to disk, which means the inode items will stay in the AIL until we free the inode. Currently that is not a problem, but a pending change requires us to empty the AIL before shutting down the filesystem. In that case leaving the inode in the AIL is lethal. Make sure to remove the log item from the AIL to allow emptying the AIL on shutdown filesystems. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-05-14xfs: remove log item from AIL in xfs_qm_dqflush after a shutdownChristoph Hellwig
If a filesystem has been forced shutdown we are never going to write dquots to disk, which means the dquot items will stay in the AIL forever. Currently that is not a problem, but a pending chance requires us to empty the AIL before shutting down the filesystem, in which case this behaviour is lethal. Make sure to remove the log item from the AIL to allow emptying the AIL on shutdown filesystems. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-22fs: xfs: fix section mismatch in linux-nextGerard Snitselaar
xfs_qm_exit() is called in init_xfs_fs(). Signed-off-by: Gerard Snitselaar <dev@snitselaar.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-14xfs: remove the global xfs_Gqm structureChristoph Hellwig
If we initialize the slab caches for the quota code when XFS is loaded there is no need for a global and reference counted quota manager structure. Drop all this overhead and also fix the error handling during quota initialization. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-14xfs: remove the per-filesystem list of dquotsChristoph Hellwig
Instead of keeping a separate per-filesystem list of dquots we can walk the radix tree for the two places where we need to iterate all quota structures. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-14xfs: use per-filesystem radix trees for dquot lookupChristoph Hellwig
Replace the global hash tables for looking up in-memory dquot structures with per-filesystem radix trees to allow scaling to a large number of in-memory dquot structures. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-14xfs: per-filesystem dquot LRU listsChristoph Hellwig
Replace the global dquot lru lists with a per-filesystem one. Note that the shrinker isn't wire up to the per-superblock VFS shrinker infrastructure as would have problems summing up and splitting the counts for inodes and dquots. I don't think this is a major problem as the quota cache isn't as interwinded with the inode cache as the dentry cache is, because an inode that is dropped from the cache will generally release a dquot reference, but most of the time it won't be the last one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-14xfs: use common code for quota statisticsChristoph Hellwig
Switch the quota code over to use the generic XFS statistics infrastructure. While the legacy /proc/fs/xfs/xqm and /proc/fs/xfs/xqmstats interfaces are preserved for now the statistics that still have a meaning with the current code are now also available from /proc/fs/xfs/stats. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-22xfs: remove xfs_trans_unlocked_itemChristoph Hellwig
There is no reason to wake up log space waiters when unlocking inodes or dquots, and the commit log has no explanation for this function either. Given that we now have exact log space wakeups everywhere we can assume the reason for this function was to paper over log space races in earlier XFS versions. Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-21xfs: change available ranges of softlimit and hardlimit in quota checkMitsuo Hayasaka
In general, quota allows us to use disk blocks and inodes up to each limit, that is, they are available if they don't exceed their limitations. Current xfs sets their available ranges to lower than them except disk inode quota check. So, this patch changes the ranges to not beyond them. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 20f12d8ac01917d96860f352f67eddd912df0afb)
2012-02-10xfs: use a normal shrinker for the dquot freelistChristoph Hellwig
Stop reusing dquots from the freelist when allocating new ones directly, and implement a shrinker that actually follows the specifications for the interface. The shrinker implementation is still highly suboptimal at this point, but we can gradually work on it. This also fixes an bug in the previous lock ordering, where we would take the hash and dqlist locks inside of the freelist lock against the normal lock ordering. This is only solvable by introducing the dispose list, and thus not when using direct reclaim of unused dquots for new allocations. As a side-effect the quota upper bound and used to free ratio values in /proc/fs/xfs/xqm are set to 0 as these values don't make any sense in the new world order. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com> (cherry picked from commit 04da0c8196ac0b12fb6b84f4b7a51ad2fa56d869)
2012-02-03Define a new function xfs_inode_dquot()Chandra Seetharaman
Define a new function xfs_inode_dquot() that takes a inode pointer and a disk quota type and returns the quota pointer for the specified quota type. This simplifies the xfs_qm_dqget() error path significantly. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-03Define a new function xfs_this_quota_on()Chandra Seetharaman
Create a new function xfs_this_quota_on() that takes a xfs_mount data structure and a disk quota type and returns true if the specified type of quota is ON in the xfs_mount data structure. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15xfs: remove XFS_QMOPT_DQSUSERChristoph Hellwig
Just read the id 0 dquot from disk directly in xfs_qm_init_quotainfo instead of going through dqget and requiring a special flag to not add the dquot to any lists. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15xfs: kill xfs_qm_idtodqChristoph Hellwig
This function doesn't help the code flow, so merge the dquot allocation and transaction handling into xfs_qm_dqread. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15xfs: merge xfs_qm_dqinit_core into the only callerChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-15xfs: add a xfs_dqhold helperChristoph Hellwig
Factor the common pattern of: xfs_dqlock(dqp); XFS_DQHOLD(dqp); xfs_dqunlock(dqp); into a new helper, and remove XFS_DQHOLD now that only one other caller is left. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-14xfs: nest qm_dqfrlist_lock inside the dquot qlockChristoph Hellwig
Allow xfs_qm_dqput to work without trylock loops by nesting the freelist lock inside the dquot qlock. In turn that requires trylocks in the reclaim path instead, but given it's a classic tradeoff between fast and slow path, and we follow the model of the inode and dentry caches. Document our new lock order now that it has settled. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-14xfs: flatten the dquot lock orderingChristoph Hellwig
Introduce a new XFS_DQ_FREEING flag that tells lookup and mplist walks to skip a dquot that is beeing freed, and use this avoid the trylock on the hash and mplist locks in xfs_qm_dqreclaim_one. Also simplify xfs_dqpurge by moving the inodes to a dispose list after marking them XFS_DQ_FREEING and avoid the locker ordering constraints. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-13xfs: implement lazy removal for the dquot freelistChristoph Hellwig
Do not remove dquots from the freelist when we grab a reference to them in xfs_qm_dqlookup, but leave them on the freelist util scanning notices that they have a reference. This speeds up the lookup fastpath, and greatly simplifies the lock ordering constraints. Note that the same scheme is used by the VFS inode and dentry caches. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-13xfs: remove XFS_DQ_INACTIVEChristoph Hellwig
Free dquots when purging them during umount instead of keeping them around on the freelist in a degraded state. The out of order locking in xfs_qm_dqpurge will be removed again later in this series. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-13xfs: cleanup xfs_qm_dqlookupChristoph Hellwig
Rearrange the code to avoid the conditional locking around the flist_locked variable. This means we lose a (rather pointless) assert, and hold the freelist lock a bit longer for one corner case. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12xfs: cleanup dquot locking helpersChristoph Hellwig
Mark the trivial lock wrappers as inline, and make the naming consistent for all of them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-12-12xfs: untangle SYNC_WAIT and SYNC_TRYLOCK meanings for xfs_qm_dqflushChristoph Hellwig
Only skip pinned dquots if SYNC_TRYLOCK is specified, and adjust the callers to keep the behaviour unchanged. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2011-10-11xfs: remove XFS_BUF_SET_VTYPE and XFS_BUF_SET_VTYPE_REFChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11xfs: simplify xfs_trans_ijoin* againChristoph Hellwig
There is no reason to keep a reference to the inode even if we unlock it during transaction commit because we never drop a reference between the ijoin and commit. Also use this fact to merge xfs_trans_ijoin_ref back into xfs_trans_ijoin - the third argument decides if an unlock is needed now. I'm actually starting to wonder if allowing inodes to be unlocked at transaction commit really is worth the effort. The only real benefit is that they can be unlocked earlier when commiting a synchronous transactions, but that could be solved by doing the log force manually after the unlock, too. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11xfs: rename xfs_bmapi to xfs_bmapi_writeDave Chinner
Now that all the read-only users of xfs_bmapi have been converted to use xfs_bmapi_read(), we can remove all the read-only handling cases from xfs_bmapi(). Once this is done, rename xfs_bmapi to xfs_bmapi_write to reflect the fact it is for allocation only. This enables us to kill the XFS_BMAPI_WRITE flag as well. Also clean up xfs_bmapi_write to the style used in the newly added xfs_bmapi_read/delay functions. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11xfs: introduce xfs_bmapi_read()Dave Chinner
xfs_bmapi() currently handles both extent map reading and allocation. As a result, the code is littered with "if (wr)" branches to conditionally do allocation operations if required. This makes the code much harder to follow and causes significant indent issues with the code. Given that read mapping is much simpler than allocation, we can split out read mapping from xfs_bmapi() and reuse the logic that we have already factored out do do all the hard work of handling the extent map manipulations. The results in a much simpler function for the common extent read operations, and will allow the allocation code to be simplified in another commit. Once xfs_bmapi_read() is implemented, convert all the callers of xfs_bmapi() that are only reading extents to use the new function. Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11xfs: Check the return value of xfs_trans_get_buf()Chandra Seetharaman
Check the return value of xfs_trans_get_buf() and fail appropriately. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11xfs: let xfs_bwrite callers handle the xfs_buf_relseChristoph Hellwig
Remove the xfs_buf_relse from xfs_bwrite and let the caller handle it to mirror the delwri and read paths. Also remove the mount pointer passed to xfs_bwrite, which is superflous now that we have a mount pointer in the buftarg. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-10-11xfs: call xfs_buf_delwri_queue directlyChristoph Hellwig
Unify the ways we add buffers to the delwri queue by always calling xfs_buf_delwri_queue directly. The xfs_bdwrite functions is removed and opencoded in its callers, and the two places setting XBF_DELWRI while a buffer is locked and expecting xfs_buf_unlock to pick it up are converted to call xfs_buf_delwri_queue directly, too. Also replace the XFS_BUF_UNDELAYWRITE macro with direct calls to xfs_buf_delwri_dequeue to make the explicit queuing/dequeuing more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2011-08-12xfs: remove subdirectoriesChristoph Hellwig
Use the move from Linux 2.6 to Linux 3.x as an excuse to kill the annoying subdirectories in the XFS source code. Besides the large amount of file rename the only changes are to the Makefile, a few files including headers with the subdirectory prefix, and the binary sysctl compat code that includes a header under fs/xfs/ from kernel/. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>