| Age | Commit message (Collapse) | Author |
|---|
|
Move timers and warnings out of xfs_quotainfo and into xfs_def_quota
so that we can utilize them on a per-type basis, rather than enforcing
them based on the values found in the first enabled quota type.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[zlang: new way to get defquota in xfs_qm_init_timelimits]
[zlang: remove redundant defq assign]
Signed-off-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs_get_defquota() currently takes an xfs_dquot, and from that obtains
the type of default quota we should get (user/group/project).
But early in init, we don't have access to a fully set up quota, so
that's not possible. The next patch needs go set up default quota
timers early, so switch xfs_get_defquota to take an explicit type
and add a helper function to obtain that type from an xfs_dquot
for the existing callers.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Pass xfs_dquot rather than xfs_disk_dquot to xfs_qm_adjust_dqtimers;
this makes it symmetric with xfs_qm_adjust_dqlimits and will help
the next patch.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
XFS project quota treats project hierarchies as "mini filesysems" and
so rather than -EDQUOT, the intent is to return -ENOSPC when a quota
reservation fails, but this behavior is not consistent.
The only place we make a decision between -EDQUOT and -ENOSPC
returns based on quota type is in xfs_trans_dqresv().
This behavior is currently controlled by whether or not the
XFS_QMOPT_ENOSPC flag gets passed into the quota reservation. However,
its use is not consistent; paths such as xfs_create() and xfs_symlink()
don't set the flag, so a reservation failure will return -EDQUOT for
project quota reservation failures rather than -ENOSPC for these sorts
of operations, even for project quota:
# mkdir mnt/project
# xfs_quota -x -c "project -s -p mnt/project 42" mnt
# xfs_quota -x -c 'limit -p isoft=2 ihard=3 42' mnt
# touch mnt/project/file{1,2,3}
touch: cannot touch ‘mnt/project/file3’: Disk quota exceeded
We can make this consistent by not requiring the flag to be set at the
top of the callchain; instead we can simply test whether we are
reserving a project quota with XFS_QM_ISPDQ in xfs_trans_dqresv and if
so, return -ENOSPC for that failure. This removes the need for the
XFS_QMOPT_ENOSPC altogether and simplifies the code a fair bit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The check XFS_IS_QUOTA_RUNNING() has been done when enter the
xfs_qm_vop_create_dqattach() function, it will return directly
if the result is false, so the followed XFS_IS_QUOTA_RUNNING()
assertion is unnecessary. If we truly care about this, the check
also can be added to the condition of next if statements.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
We share an inode between gquota and pquota with the older
superblock that doesn't have separate pquotino, and for the
need_alloc == false case we don't need to call xfs_dir_ialloc()
function, so add the check if reserved free disk blocks is
needed.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The trace event xfs_dquot_dqalloc does not depend on the
value uq, so remove the condition, and trace quota allocations
for all quota types.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
A dquot flush currently blocks on the buffer lock for the underlying
dquot buffer. In turn, this causes xfsaild to block rather than
continue processing other items in the meantime. Update
xfs_qm_dqflush() to trylock the buffer, similar to how inode buffers
are handled, and return -EAGAIN if the lock fails. Fix up any
callers that don't currently handle the error properly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When quotacheck runs, it zeroes all the timer fields in every dquot.
Unfortunately, it also does this to the root dquot, which erases any
preconfigured grace intervals and warning limits that the administrator
may have set. Worse yet, the incore copies of those variables remain
set. This cache coherence problem manifests itself as the grace
interval mysteriously being reset back to the defaults at the /next/
mount.
Fix it by not resetting the root disk dquot's timer and warning fields.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Remove the XFS wrappers for converting from and to the kuid/kgid types.
Mostly this means switching to VFS i_{u,g}id_{read,write} helpers, but
in a few spots the calls to the conversion functions is open coded.
To match the use of sb->s_user_ns in the helpers and other file systems,
sb->s_user_ns is also used in the quota code. The ACL code already does
the conversion in a grotty layering violation in the VFS xattr code,
so it keeps using init_user_ns for the identity mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Use the Linux inode i_uid/i_gid members everywhere and just convert
from/to the scalar value when reading or writing the on-disk inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Signed-off-by: Pavel Reichl <preichl@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix some of the comments]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
There is no point in splitting the fields like this in an purely
in-memory structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Convert the last of the open coded corruption check and report idioms to
use the XFS_IS_CORRUPT macro.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Make sure we log something to dmesg whenever we return -EFSCORRUPTED up
the call stack.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Since no caller is using KM_NOSLEEP and no callee branches on KM_SLEEP,
we can remove KM_NOSLEEP and replace KM_SLEEP with 0.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Add a new xfs_bulk_ireq flag to constrain the iteration to a single AG.
If the passed-in startino value is zero then we start with the first
inode in the AG that the user passes in; otherwise, we iterate only
within the same AG as the passed-in inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Create a pwork destroy function that uses polling instead of
uninterruptible sleep to wait for work items to finish so that we can
touch the softlockup watchdog. IOWs, gross hack.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Create a parallel iwalk implementation and switch quotacheck to use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Convert quotacheck to use the new iwalk iterator to dig through the
inodes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.
nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this. I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Widen the incore inode's i_delayed_blks counter to be a 64-bit integer.
This is necessary to fix an integer overflow problem that can be
reproduced easily now that we use the counter to track blocks that are
assigned to the inode in memory but not on disk. This includes actual
delalloc reservations as well as real extents in the COW fork that
are waiting to be remapped into the data fork.
These 'delayed mapping' blocks can easily exceed 2^32 blocks if one
creates a very large sparse file of size approximately 2^33 bytes with
one byte written every 2^23 bytes, sets a very large COW extent size
hint of 2^23 blocks, reflinks the first file into a second file, and
then writes a single byte every 2^23 blocks in the original file.
When this happens, we'll try to create approximately 1024 2^23 extent
reservations in the COW fork, which will overflow the counter and cause
problems.
Note that on x64 we end up filling a 4-byte gap in the structure so this
doesn't increase the incore size.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Replace the IRELE macro with a proper function so that we can do proper
typechecking and so that we can stop open-coding iput in scrub, which
means that we'll be able to ftrace inode lifetimes going through scrub
correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/
This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:
for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done
And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:
$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}
/^ \* This program is free software/ {
hdr = 2.0;
next
}
/any later version./ {
tag = "GPL-2.0+"
next
}
/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}
/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}
/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}
// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}
END { }
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Replace all the if (!error) weirdness with helper functions that follow
our regular coding practices, and factor out the ternary expression soup.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The function 'xfs_qm_dqiterate' doesn't iterate dquots at all, it
iterates all dquot blocks of a quota inode and clears the counters.
Therefore, change the name to something more descriptive so that we can
introduce a real dquot iterator later.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
DQALLOC is only ever used with xfs_qm_dqget*, and the only flag that the
_dqget family of functions cares about is DQALLOC. Therefore, change
it to a boolean 'can alloc?' flag for the dqget interfaces where that
makes sense.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
The quota initialization code needs an "uncached" variant of _dqget to
read in default quota limits and timers before the dquot cache is fully
set up. We've already split up _dqget into its component pieces so
create a fourth variant to address this need, and make dqread internal
to xfs_dquot.c again.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Quotacheck only runs during mount, which means that there are no other
processes in the system that could be doing chown or chproj. Therefore
there's no potential for racing to attach dquots to the inode so we can
drop all the ILOCK and race detection bits from quotacheck.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
There are two uses of dqget here -- one is to return the dquot for a
given type and id, and the other is to return the dquot for a given type
and inode. Those are two separate things, so split them into two
smaller functions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The flags argument is always zero, get rid of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
When dquot flush or purge fail there's no need to spam the logs, we've
already logged the IO error or fs shutdown that caused the flush
failures.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
The log item flags contain a field that is protected by the AIL
lock - the XFS_LI_IN_AIL flag. We use non-atomic RMW operations to
set and clear these flags, but most of the updates and checks are
not done with the AIL lock held and so are susceptible to update
races.
Fix this by changing the log item flags to use atomic bitops rather
than be reliant on the AIL lock for update serialisation.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Add an xfs_dqblk verifier so that it can check the uuid on V5 filesystems;
it calls the existing xfs_dquot_verify verifier to validate the
xfs_disk_dquot_t contained inside it. This lets us move the uuid
verification out of the crc verifier, which makes little sense.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
It's a bit dicey to pass in the smaller xfs_disk_dquot and then cast it to
something larger; pass in the full xfs_dqblk so we know the caller has sent
us the right thing. Rename the function to xfs_dqblk_repair for
clarity.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Long ago the flags argument was used to determine whether to issue warnings
about corruptions, but that's done elsewhere now and the flag is unused
here, so remove it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Move xfs_buf_incore out of line and make it the only way to look up
a buffer in the buffer cache from outside the buffer cache. Convert
the external users of _xfs_buf_find() to xfs_buf_incore() and make
_xfs_buf_find() static.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: actually rename xfs_incore -> xfs_buf_incore]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs_dir_ialloc() rolls the current transaction when allocation of a new
inode required the space manager to perform an allocation and replinish
the Inode btree.
None of the callers of xfs_dir_ialloc() need to know if the
transaction was committed. Hence this commit removes the "committed"
argument of xfs_dir_ialloc.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Starting with commit 57e734423ad ("vsprintf: refactor %pK code out of
pointer"), the behavior of the raw '%p' printk format specifier was
changed to print a 32-bit hash of the pointer value to avoid leaking
kernel pointers into dmesg. For most situations that's good.
This is /undesirable/ behavior when we're trying to debug XFS, however,
so define a PTR_FMT that prints the actual pointer when we're in debug
mode.
Note that %p for tracepoints still prints the raw pointer, so in the
long run we could consider rewriting some of these messages as
tracepoints.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Rename xfs_dqcheck to xfs_dquot_verify and make it return an
xfs_failaddr_t like every other structure verifier function.
This enables us to check on-disk quotas in the same way that we check
everything else. Callers are now responsible for logging errors, as
XFS_QMOPT_DOWARN goes away.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Move the dquot repair code into a separate function and remove
XFS_QMOPT_DQREPAIR in favor of calling the helper directly. Remove
other dead code because quotacheck is the only caller of DQREPAIR.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
xfs_qm_init_quotainfo() does not check result of register_shrinker()
which was tagged as __must_check recently, reported by sparse.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
[darrick: move xfs_qm_destroy_quotainos nearer xfs_qm_init_quotainos]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs_qm_destroy_quotainfo() does not destroy quotainfo->qi_tree_lock
while destroys quotainfo->qi_quotaofflock.
Signed-off-by: Aliaksei Karaliou <akaraliou.dev@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
If we create a new file we will need an inode, and usually some metadata
in the parent direction. Aiming for everything to go well despite the
lack of a reservation leads to dirty transactions cancelled under a heavy
create/delete load. This patch removes those nospace transactions, which
will lead to slightly earlier ENOSPC on some workloads, but instead
prevent file system shutdowns due to cancelling dirty transactions for
others.
A customer could observe assertations failures and shutdowns due to
cancelation of dirty transactions during heavy NFS workloads as shown
below:
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728125] XFS: Assertion failed: error != -ENOSPC, file: fs/xfs/xfs_inode.c, line: 1262
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728222] Call Trace:
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728246] [<ffffffff81795daf>] dump_stack+0x63/0x81
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728262] [<ffffffff810a1a5a>] warn_slowpath_common+0x8a/0xc0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728264] [<ffffffff810a1b8a>] warn_slowpath_null+0x1a/0x20
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728285] [<ffffffffa01bf403>] asswarn+0x33/0x40 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728308] [<ffffffffa01bb07e>] xfs_create+0x7be/0x7d0 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728329] [<ffffffffa01b6ffb>] xfs_generic_create+0x1fb/0x2e0 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728348] [<ffffffffa01b7114>] xfs_vn_mknod+0x14/0x20 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728366] [<ffffffffa01b7153>] xfs_vn_create+0x13/0x20 [xfs]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728380] [<ffffffff81231de5>] vfs_create+0xd5/0x140
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728390] [<ffffffffa045ddb9>] do_nfsd_create+0x499/0x610 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728396] [<ffffffffa0465fa5>] nfsd3_proc_create+0x135/0x210 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728401] [<ffffffffa04561e3>] nfsd_dispatch+0xc3/0x210 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728416] [<ffffffffa03bfa43>] svc_process_common+0x453/0x6f0 [sunrpc]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728423] [<ffffffffa03bfdf3>] svc_process+0x113/0x1f0 [sunrpc]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728427] [<ffffffffa0455bcf>] nfsd+0x10f/0x180 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728432] [<ffffffffa0455ac0>] ? nfsd_destroy+0x80/0x80 [nfsd]
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728438] [<ffffffff810c0d58>] kthread+0xd8/0xf0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728441] [<ffffffff810c0c80>] ? kthread_create_on_node+0x1b0/0x1b0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728451] [<ffffffff8179d962>] ret_from_fork+0x42/0x70
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728453] [<ffffffff810c0c80>] ? kthread_create_on_node+0x1b0/0x1b0
2017-05-30 21:17:06 kernel: WARNING: [ 2670.728454] ---[ end trace f9822c842fec81d4 ]---
2017-05-30 21:17:06 kernel: ALERT: [ 2670.728477] XFS (sdb): Internal error xfs_trans_cancel at line 983 of file fs/xfs/xfs_trans.c. Caller xfs_create+0x4ee/0x7d0 [xfs]
2017-05-30 21:17:06 kernel: ALERT: [ 2670.728684] XFS (sdb): Corruption of in-memory data detected. Shutting down filesystem
2017-05-30 21:17:06 kernel: ALERT: [ 2670.728685] XFS (sdb): Please umount the filesystem and rectify the problem(s)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Use the existing functionality instead of directly poking into the extent
list.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
If a dquot has an id of U32_MAX, the next lookup index increment
overflows the uint32_t back to 0. This starts the lookup sequence
over from the beginning, repeats indefinitely and results in a
livelock.
Update xfs_qm_dquot_walk() to explicitly check for the lookup
overflow and exit the loop.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Reclaim during quotacheck can lead to deadlocks on the dquot flush
lock:
- Quotacheck populates a local delwri queue with the physical dquot
buffers.
- Quotacheck performs the xfs_qm_dqusage_adjust() bulkstat and
dirties all of the dquots.
- Reclaim kicks in and attempts to flush a dquot whose buffer is
already queud on the quotacheck queue. The flush succeeds but
queueing to the reclaim delwri queue fails as the backing buffer is
already queued. The flush unlock is now deferred to I/O completion
of the buffer from the quotacheck queue.
- The dqadjust bulkstat continues and dirties the recently flushed
dquot once again.
- Quotacheck proceeds to the xfs_qm_flush_one() walk which requires
the flush lock to update the backing buffers with the in-core
recalculated values. It deadlocks on the redirtied dquot as the
flush lock was already acquired by reclaim, but the buffer resides
on the local delwri queue which isn't submitted until the end of
quotacheck.
This is reproduced by running quotacheck on a filesystem with a
couple million inodes in low memory (512MB-1GB) situations. This is
a regression as of commit 43ff2122e6 ("xfs: on-stack delayed write
buffer lists"), which removed a trylock and buffer I/O submission
from the quotacheck dquot flush sequence.
Quotacheck first resets and collects the physical dquot buffers in a
delwri queue. Then, it traverses the filesystem inodes via bulkstat,
updates the in-core dquots, flushes the corrected dquots to the
backing buffers and finally submits the delwri queue for I/O. Since
the backing buffers are queued across the entire quotacheck
operation, dquot reclaim cannot possibly complete a dquot flush
before quotacheck completes.
Therefore, quotacheck must submit the buffer for I/O in order to
cycle the flush lock and flush the dirty in-core dquot to the
buffer. Add a delwri queue buffer push mechanism to submit an
individual buffer for I/O without losing the delwri queue status and
use it from quotacheck to avoid the deadlock. This restores
quotacheck behavior to as before the regression was introduced.
Reported-by: Martin Svec <martin.svec@zoner.cz>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The quotacheck error handling of the delwri buffer list assumes the
resident buffers are locked and doesn't clear the _XBF_DELWRI_Q flag
on the buffers that are dequeued. This can lead to assert failures
on buffer release and possibly other locking problems.
Move this code to a delwri queue cancel helper function to
encapsulate the logic required to properly release buffers from a
delwri queue. Update the helper to clear the delwri queue flag and
call it from quotacheck.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
The kbuild test robot caught this; in debug code we have another
caller of do_div with a 32-bit dividend (j) which is caught now
that we are using the kernel-supplied do_div.
None of the values used here are 64-bit; just use simple division.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
