| Age | Commit message (Collapse) | Author |
|---|
|
There are now five separate space allocator interfaces exposed to the
rest of XFS for five different strategies to find space. Add
tracepoints for each of them so that I can tell from a trace dump
exactly which ones got called and what happened underneath them. Add a
sixth so it's more obvious if an allocation actually happened.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Callers of xfs_alloc_vextent_iterate_ags that pass in the TRYLOCK flag
want us to perform a non-blocking scan of the AGs for free space. There
are no ordering constraints for non-blocking AGF lock acquisition, so
the scan can freely start over at AG 0 even when minimum_agno > 0.
This manifests fairly reliably on xfs/294 on 6.3-rc2 with the parent
pointer patchset applied and the realtime volume enabled. I observed
the following sequence as part of an xfs_dir_createname call:
0. Fragment the free space, then allocate nearly all the free space in
all AGs except AG 0.
1. Create a directory in AG 2 and let it grow for a while.
2. Try to allocate 2 blocks to expand the dirent part of a directory.
The space will be allocated out of AG 0, but the allocation will not
be contiguous. This (I think) activates the LOWMODE allocator.
3. The bmapi call decides to convert from extents to bmbt format and
tries to allocate 1 block. This allocation request calls
xfs_alloc_vextent_start_ag with the inode number, which starts the
scan at AG 2. We ignore AG 0 (with all its free space) and instead
scrape AG 2 and 3 for more space. We find one block, but this now
kicks t_highest_agno to 3.
4. The createname call decides it needs to split the dabtree. It tries
to allocate even more space with xfs_alloc_vextent_start_ag, but now
we're constrained to AG 3, and we don't find the space. The
createname returns ENOSPC and the filesystem shuts down.
This change fixes the problem by making the trylock scan wrap around to
AG 0 if it doesn't like the AGs that it finds. Since the current
transaction itself holds AGF 0, the trylock of AGF 0 will succeed, and
we take space from the AG that has plenty.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
In porting his development branch to 6.3-rc1, yours truly has
repeatedly screwed up the args->pag being fed to the xfs_alloc_vextent*
functions. Add some debugging assertions to test the preconditions
required of the callers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The recent writeback corruption fixes changed the code in
xfs_discard_folio() to calculate a byte range to for punching
delalloc extents. A mistake was made in using round_up(pos) for the
end offset, because when pos points at the first byte of a block, it
does not get rounded up to point to the end byte of the block. hence
the punch range is short, and this leads to unexpected behaviour in
certain cases in xfs_bmap_punch_delalloc_range.
e.g. pos = 0 means we call xfs_bmap_punch_delalloc_range(0,0), so
there is no previous extent and it rounds up the punch to the end of
the delalloc extent it found at offset 0, not the end of the range
given to xfs_bmap_punch_delalloc_range().
Fix this by handling the zero block offset case correctly.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=217030
Link: https://lore.kernel.org/linux-xfs/Y+vOfaxIWX1c%2Fyy9@bfoster/
Fixes: 7348b322332d ("xfs: xfs_bmap_punch_delalloc_range() should take a byte range")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Found-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
The background inode inactivation can attached dquots to inodes, but
this can race with a foreground quotacheck failure that leads to
disabling quotas and freeing the mp->m_quotainfo structure. The
background inode inactivation then tries to allocate a quota, tries
to dereference mp->m_quotainfo, and crashes like so:
XFS (loop1): Quotacheck: Unsuccessful (Error -5): Disabling quotas.
xfs filesystem being mounted at /root/syzkaller.qCVHXV/0/file0 supports timestamps until 2038 (0x7fffffff)
BUG: kernel NULL pointer dereference, address: 00000000000002a8
....
CPU: 0 PID: 161 Comm: kworker/0:4 Not tainted 6.2.0-c9c3395d5e3d #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: xfs-inodegc/loop1 xfs_inodegc_worker
RIP: 0010:xfs_dquot_alloc+0x95/0x1e0
....
Call Trace:
<TASK>
xfs_qm_dqread+0x46/0x440
xfs_qm_dqget_inode+0x154/0x500
xfs_qm_dqattach_one+0x142/0x3c0
xfs_qm_dqattach_locked+0x14a/0x170
xfs_qm_dqattach+0x52/0x80
xfs_inactive+0x186/0x340
xfs_inodegc_worker+0xd3/0x430
process_one_work+0x3b1/0x960
worker_thread+0x52/0x660
kthread+0x161/0x1a0
ret_from_fork+0x29/0x50
</TASK>
....
Prevent this race by flushing all the queued background inode
inactivations pending before purging all the cached dquots when
quotacheck fails.
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Pull moar xfs updates from Darrick Wong:
"This contains a fix for a deadlock in the allocator. It continues the
slow march towards being able to offline AGs, and it refactors the
interface to the xfs allocator to be less indirection happy.
Summary:
- Fix a deadlock in the free space allocator due to the AG-walking
algorithm forgetting to follow AG-order locking rules
- Make the inode allocator prefer existing free inodes instead of
failing to allocate new inode chunks when free space is low
- Set minleft correctly when setting allocator parameters for bmap
changes
- Fix uninitialized variable access in the getfsmap code
- Make a distinction between active and passive per-AG structure
references. For now, active references are taken to perform some
work in an AG on behalf of a high level operation; passive
references are used by lower level code to finish operations
started by other threads. Eventually this will become part of
online shrink
- Split out all the different allocator strategies into separate
functions to move us away from design antipattern of filling out a
huge structure for various differentish things and issuing a single
function multiplexing call
- Various cleanups in the filestreams allocator code, which we might
very well want to deprecate instead of continuing
- Fix a bug with the agi rotor code that was introduced earlier in
this series"
* tag 'xfs-6.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (44 commits)
xfs: restore old agirotor behavior
xfs: fix uninitialized variable access
xfs: refactor the filestreams allocator pick functions
xfs: return a referenced perag from filestreams allocator
xfs: pass perag to filestreams tracing
xfs: use for_each_perag_wrap in xfs_filestream_pick_ag
xfs: track an active perag reference in filestreams
xfs: factor out MRU hit case in xfs_filestream_select_ag
xfs: remove xfs_filestream_select_ag() longest extent check
xfs: merge new filestream AG selection into xfs_filestream_select_ag()
xfs: merge filestream AG lookup into xfs_filestream_select_ag()
xfs: move xfs_bmap_btalloc_filestreams() to xfs_filestreams.c
xfs: use xfs_bmap_longest_free_extent() in filestreams
xfs: get rid of notinit from xfs_bmap_longest_free_extent
xfs: factor out filestreams from xfs_bmap_btalloc_nullfb
xfs: convert trim to use for_each_perag_range
xfs: convert xfs_alloc_vextent_iterate_ags() to use perag walker
xfs: move the minimum agno checks into xfs_alloc_vextent_check_args
xfs: fold xfs_alloc_ag_vextent() into callers
xfs: move allocation accounting to xfs_alloc_vextent_set_fsbno()
...
|
|
Prior to the removal of xfs_ialloc_next_ag, we would increment the agi
rotor and return the *old* value. atomic_inc_return returns the new
value, which causes mkfs to allocate the root directory in AG 1. Put
back the old behavior (at least for mkfs) by subtracting 1 here.
Fixes: 20a5eab49d35 ("xfs: convert xfs_ialloc_next_ag() to an atomic")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
Pull xfs updates from Darrick Wong:
"There's a couple of bug fixes, some cleanups for inconsistent variable
names and reduction of struct boxing and unboxing in the logging code.
More work is pending, which will begin reworking allocation group
lifetimes and finally replace confusing indirect calls to the
allocator with actual ... function calls. But I want to let that
experience another week of testing.
Summary:
- Eliminate repeated boxing and unboxing of log item parameters
- Clean up some confusing variable names in the log item code
- Fix a deadlock when doing unwritten extent conversion that causes a
bmbt split when there are sustained memory shortages and the worker
pool runs out of worker threads
- Fix the panic_mask debug knob not being able to trigger on verifier
errors
- Constify kobj_type objects"
* tag 'xfs-6.3-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: revert commit 8954c44ff477
xfs: make kobj_type structures constant
xfs: allow setting full range of panic tags
xfs: don't use BMBT btree split workers for IO completion
xfs: fix confusing variable names in xfs_refcount_item.c
xfs: pass refcount intent directly through the log intent code
xfs: fix confusing variable names in xfs_rmap_item.c
xfs: pass rmap space mapping directly through the log intent code
xfs: fix confusing xfs_extent_item variable names
xfs: pass xfs_extent_free_item directly through the log intent code
xfs: fix confusing variable names in xfs_bmap_item.c
xfs: pass the xfs_bmbt_irec directly through the log intent code
xfs: use strscpy() to instead of strncpy()
|
|
Pull iomap updates from Darrick Wong:
"This is mostly rearranging things to make life easier for gfs2,
nothing all that mindblowing for this release.
- Change when the iomap page_done function is called so that we still
have a locked folio in the success case. This fixes a writeback
race in gfs2
- Change when the iomap page_prepare function is called so that gfs2
can recover from OOM scenarios more gracefully
- Rename the iomap page_ops to folio_ops, since they operate on
folios now"
* tag 'iomap-6.3-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Rename page_ops to folio_ops
iomap: Rename page_prepare handler to get_folio
iomap: Add __iomap_get_folio helper
iomap/gfs2: Get page in page_prepare handler
iomap: Add iomap_get_folio helper
iomap: Rename page_done handler to put_folio
iomap/gfs2: Unlock and put folio in page_done handler
iomap: Add __iomap_put_folio helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs idmapping updates from Christian Brauner:
- Last cycle we introduced the dedicated struct mnt_idmap type for
mount idmapping and the required infrastucture in 256c8aed2b42 ("fs:
introduce dedicated idmap type for mounts"). As promised in last
cycle's pull request message this converts everything to rely on
struct mnt_idmap.
Currently we still pass around the plain namespace that was attached
to a mount. This is in general pretty convenient but it makes it easy
to conflate namespaces that are relevant on the filesystem with
namespaces that are relevant on the mount level. Especially for
non-vfs developers without detailed knowledge in this area this was a
potential source for bugs.
This finishes the conversion. Instead of passing the plain namespace
around this updates all places that currently take a pointer to a
mnt_userns with a pointer to struct mnt_idmap.
Now that the conversion is done all helpers down to the really
low-level helpers only accept a struct mnt_idmap argument instead of
two namespace arguments.
Conflating mount and other idmappings will now cause the compiler to
complain loudly thus eliminating the possibility of any bugs. This
makes it impossible for filesystem developers to mix up mount and
filesystem idmappings as they are two distinct types and require
distinct helpers that cannot be used interchangeably.
Everything associated with struct mnt_idmap is moved into a single
separate file. With that change no code can poke around in struct
mnt_idmap. It can only be interacted with through dedicated helpers.
That means all filesystems are and all of the vfs is completely
oblivious to the actual implementation of idmappings.
We are now also able to extend struct mnt_idmap as we see fit. For
example, we can decouple it completely from namespaces for users that
don't require or don't want to use them at all. We can also extend
the concept of idmappings so we can cover filesystem specific
requirements.
In combination with the vfs{g,u}id_t work we finished in v6.2 this
makes this feature substantially more robust and thus difficult to
implement wrong by a given filesystem and also protects the vfs.
- Enable idmapped mounts for tmpfs and fulfill a longstanding request.
A long-standing request from users had been to make it possible to
create idmapped mounts for tmpfs. For example, to share the host's
tmpfs mount between multiple sandboxes. This is a prerequisite for
some advanced Kubernetes cases. Systemd also has a range of use-cases
to increase service isolation. And there are more users of this.
However, with all of the other work going on this was way down on the
priority list but luckily someone other than ourselves picked this
up.
As usual the patch is tiny as all the infrastructure work had been
done multiple kernel releases ago. In addition to all the tests that
we already have I requested that Rodrigo add a dedicated tmpfs
testsuite for idmapped mounts to xfstests. It is to be included into
xfstests during the v6.3 development cycle. This should add a slew of
additional tests.
* tag 'fs.idmapped.v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (26 commits)
shmem: support idmapped mounts for tmpfs
fs: move mnt_idmap
fs: port vfs{g,u}id helpers to mnt_idmap
fs: port fs{g,u}id helpers to mnt_idmap
fs: port i_{g,u}id_into_vfs{g,u}id() to mnt_idmap
fs: port i_{g,u}id_{needs_}update() to mnt_idmap
quota: port to mnt_idmap
fs: port privilege checking helpers to mnt_idmap
fs: port inode_owner_or_capable() to mnt_idmap
fs: port inode_init_owner() to mnt_idmap
fs: port acl to mnt_idmap
fs: port xattr to mnt_idmap
fs: port ->permission() to pass mnt_idmap
fs: port ->fileattr_set() to pass mnt_idmap
fs: port ->set_acl() to pass mnt_idmap
fs: port ->get_acl() to pass mnt_idmap
fs: port ->tmpfile() to pass mnt_idmap
fs: port ->rename() to pass mnt_idmap
fs: port ->mknod() to pass mnt_idmap
fs: port ->mkdir() to pass mnt_idmap
...
|
|
If the end position of a GETFSMAP query overlaps an allocated space and
we're using the free space info to generate fsmap info, the akeys
information gets fed into the fsmap formatter with bad results.
Zero-init the space.
Reported-by: syzbot+090ae72d552e6bd93cfe@syzkaller.appspotmail.com
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Now that the filestreams allocator is largely rewritten,
restructure the main entry point and pick function to seperate out
the different operations cleanly. The MRU lookup function should not
handle the start AG selection on MRU lookup failure, and nor should
the pick function handle building the association that is inserted
into the MRU.
This leaves the filestreams allocator fairly clean and easy to
understand, returning to the caller with an active perag reference
and a target block to allocate at.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Now that the filestreams AG selection tracks active perags, we need
to return an active perag to the core allocator code. This is
because the file allocation the filestreams code will run are AG
specific allocations and so need to pin the AG until the allocations
complete.
We cannot rely on the filestreams item reference to do this - the
filestreams association can be torn down at any time, hence we
need to have a separate reference for the allocation process to pin
the AG after it has been selected.
This means there is some perag juggling in allocation failure
fallback paths as they will do all AG scans in the case the AG
specific allocation fails. Hence we need to track the perag
reference that the filestream allocator returned to make sure we
don't leak it on repeated allocation failure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Pass perags instead of raw ag numbers, avoiding the need for the
special peek function for the tracing code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
xfs_filestream_pick_ag() is now ready to rework to use
for_each_perag_wrap() for iterating the perags during the AG
selection scan.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Rather than just track the agno of the reference, track a referenced
perag pointer instead. This will allow active filestreams to prevent
AGs from going away until the filestreams have been torn down.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Because it now stands out like a sore thumb. Factoring out this case
starts the process of simplifying xfs_filestream_select_ag() again.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Picking a new AG checks the longest free extent in the AG is valid,
so there's no need to repeat the check in
xfs_filestream_select_ag(). Remove it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
This is largely a wrapper around xfs_filestream_pick_ag() that
repeats a lot of the lookups that we just merged back into
xfs_filestream_select_ag() from the lookup code. Merge the
xfs_filestream_new_ag() code back into _select_ag() to get rid
of all the unnecessary logic.
Indeed, this makes it obvious that if we have no parent inode,
the filestreams allocator always selects AG 0 regardless of whether
it is fit for purpose or not.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
The lookup currently either returns the cached filestream AG or it
calls xfs_filestreams_select_lengths() to looks up a new AG. This
has verify the AG that is selected, so we end up doing "select a new
AG loop in a couple of places when only one really is needed. Merge
the initial lookup functionality with the length selection so that
we only need to do a single pick loop on lookup or verification
failure.
This undoes a lot of the factoring that enabled the selection to be
moved over to the filestreams code. It makes
xfs_filestream_select_ag() an awful messier, but it has to be made
worse before it can get better in future patches...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
xfs_bmap_btalloc_filestreams() calls two filestreams functions to
select the AG to allocate from. Both those functions end up in
the same selection function that iterates all AGs multiple times.
Worst case, xfs_bmap_btalloc_filestreams() can iterate all AGs 4
times just to select the initial AG to allocate in.
Move the AG selection to fs/xfs/xfs_filestreams.c as a single
interface so that the inefficient AG interation is contained
entirely within the filestreams code. This will allow the
implementation to be simplified and made more efficient in future
patches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
The code in xfs_bmap_longest_free_extent() is open coded in
xfs_filestream_pick_ag(). Export xfs_bmap_longest_free_extent and
call it from the filestreams code instead.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
It is only set if reading the AGF gets a EAGAIN error. Just return
the EAGAIN error and handle that error in the callers.
This means we can remove the not_init parameter from
xfs_bmap_select_minlen(), too, because the use of not_init there is
pessimistic. If we can't read the agf, it won't increase blen.
The only time we actually care whether we checked all the AGFs for
contiguous free space is when the best length is less than the
minimum allocation length. If not_init is set, then we ignore blen
and set the minimum alloc length to the absolute minimum, not the
best length we know already is present.
However, if blen is less than the minimum we're going to ignore it
anyway, regardless of whether we scanned all the AGFs or not. Hence
not_init can go away, because we only use if blen is good from
the scanned AGs otherwise we ignore it altogether and use minlen.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
There's many if (filestreams) {} else {} branches in this function.
Split it out into a filestreams specific function so that we can
then work directly on cleaning up the filestreams code without
impacting the rest of the allocation algorithms.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
To convert it to using active perag references and hence make it
shrink safe.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Now that the AG iteration code in the core allocation code has been
cleaned up, we can easily convert it to use a for_each_perag..()
variant to use active references and skip AGs that it can't get
active references on.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
All of the allocation functions now extract the minimum allowed AG
from the transaction and then use it in some way. The allocation
functions that are restricted to a single AG all check if the
AG requested can be allocated from and return an error if so. These
all set args->agno appropriately.
All the allocation functions that iterate AGs use it to calculate
the scan start AG. args->agno is not set until the iterator starts
walking AGs.
Hence we can easily set up a conditional check against the minimum
AG allowed in xfs_alloc_vextent_check_args() based on whether
args->agno contains NULLAGNUMBER or not and move all the repeated
setup code to xfs_alloc_vextent_check_args(), further simplifying
the allocation functions.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
We don't need the multiplexing xfs_alloc_ag_vextent() provided
anymore - we can just call the exact/near/size variants directly.
This allows us to remove args->type completely and stop using
args->fsbno as an input to the allocator algorithms.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Move it from xfs_alloc_ag_vextent() so we can get rid of that layer.
Rename xfs_alloc_vextent_set_fsbno() to xfs_alloc_vextent_finish()
to indicate that it's function is finishing off the allocation that
we've run now that it contains much more functionality.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Now that we have wrapper functions for each type of allocation we
can ask for, we can start unravelling xfs_alloc_ag_vextent(). That
is essentially just a prepare stage, the allocation multiplexer
and a post-allocation accounting step is the allocation proceeded.
The current xfs_alloc_vextent*() wrappers all have a prepare stage,
the allocation operation and a post-allocation accounting step.
We can consolidate this by moving the AG alloc prep code into the
wrapper functions, the accounting code in the wrapper accounting
functions, and cut out the multiplexer layer entirely.
This patch consolidates the AG preparation stage.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Two of the callers to xfs_alloc_vextent_this_ag() actually want
exact block number allocation, not anywhere-in-ag allocation. Split
this out from _this_ag() as a first class citizen so no external
extent allocation code needs to care about args->type anymore.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
The remaining callers of xfs_alloc_vextent() are all doing NEAR_BNO
allocations. We can replace that function with a new
xfs_alloc_vextent_near_bno() function that does this explicitly.
We also multiplex NEAR_BNO allocations through
xfs_alloc_vextent_this_ag via args->type. Replace all of these with
direct calls to xfs_alloc_vextent_near_bno(), too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Change obvious callers of single AG allocation to use
xfs_alloc_vextent_start_bno(). Callers no long need to specify
XFS_ALLOCTYPE_START_BNO, and so the type can be driven inward and
removed.
While doing this, also pass the allocation target fsb as a parameter
rather than encoding it in args->fsbno.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Change obvious callers of single AG allocation to use
xfs_alloc_vextent_first_ag(). This gets rid of
XFS_ALLOCTYPE_FIRST_AG as the type used within
xfs_alloc_vextent_first_ag() during iteration is _THIS_AG. Hence we
can remove the setting of args->type from all the callers of
_first_ag() and remove the alloctype.
While doing this, pass the allocation target fsb as a parameter
rather than encoding it in args->fsbno. This starts the process
of making args->fsbno an output only variable rather than
input/output.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
There are several different contexts xfs_bmap_btalloc() handles, and
large chunks of the code execute independent allocation contexts.
Try to untangle this mess a bit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Change obvious callers of single AG allocation to use
xfs_alloc_vextent_this_ag(). Drive the per-ag grabbing out to the
callers, too, so that callers with active references don't need
to do new lookups just for an allocation in a context that already
has a perag reference.
The only remaining caller that does single AG allocation through
xfs_alloc_vextent() is xfs_bmap_btalloc() with
XFS_ALLOCTYPE_NEAR_BNO. That is going to need more untangling before
it can be converted cleanly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
There's a bit of a recursive conundrum around
xfs_alloc_ag_vextent(). We can't first call xfs_alloc_ag_vextent()
without preparing the AGFL for the allocation, and preparing the
AGFL calls xfs_alloc_ag_vextent() to prepare the AGFL for the
allocation. This "double allocation" requirement is not really clear
from the current xfs_alloc_fix_freelist() calls that are sprinkled
through the allocation code.
It's not helped that xfs_alloc_ag_vextent() can actually allocate
from the AGFL itself, but there's special code to prevent AGFL prep
allocations from allocating from the free list it's trying to prep.
The naming is also not consistent: args->wasfromfl is true when we
allocated _from_ the free list, but the indication that we are
allocating _for_ the free list is via checking that (args->resv ==
XFS_AG_RESV_AGFL).
So, lets make this "allocation required for allocation" situation
clear by moving it all inside xfs_alloc_ag_vextent(). The freelist
allocation is a specific XFS_ALLOCTYPE_THIS_AG allocation, which
translated directly to xfs_alloc_ag_vextent_size() allocation.
This enables us to replace __xfs_alloc_vextent_this_ag() with a call
to xfs_alloc_ag_vextent(), and we drive the freelist fixing further
into the per-ag allocation algorithm.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
The core of the per-ag iteration is effectively doing a "this ag"
allocation on one AG at a time. Use the same code to implement the
core "this ag" allocation in both xfs_alloc_vextent_this_ag()
and xfs_alloc_vextent_iterate_ags().
This means we only call xfs_alloc_ag_vextent() from one place so we
can easily collapse the call stack in future patches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
It's a multiplexing mess that can be greatly simplified, and really
needs to be simplified to allow active per-ag references to
propagate from initial AG selection code the the bmapi code.
This splits the code out into separate a parameter checking
function, an iterator function, and allocation completion functions
and then implements the individual policies using these functions.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
In several places we iterate every AG from a specific start agno and
wrap back to the first AG when we reach the end of the filesystem to
continue searching. We don't have a primitive for this iteration
yet, so add one for conversion of these algorithms to per-ag based
iteration.
The filestream AG select code is a mess, and this initially makes it
worse. The per-ag selection needs to be driven completely into the
filestream code to clean this up and it will be done in a future
patch that makes the filestream allocator use active per-ag
references correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
We currently don't have any flags or operational state in the
xfs_perag except for the pagf_init and pagi_init flags. And the
agflreset flag. Oh, there's also the pagf_metadata and pagi_inodeok
flags, too.
For controlling per-ag operations, we are going to need some atomic
state flags. Hence add an opstate field similar to what we already
have in the mount and log, and convert all these state flags across
to atomic bit operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
This is currently a spinlock lock protected rotor which can be
implemented with a single atomic operation. Change it to be more
efficient and get rid of the m_agirotor_lock. Noticed while
converting the inode allocation AG selection loop to active perag
references.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Lots of code in the inobt infrastructure is passed both xfs_mount
and perags. We only need perags for the per-ag inode allocation
code, so reduce the duplication by passing only the perags as the
primary object.
This ends up reducing the code size by a bit:
text data bss dec hex filename
orig 1138878 323979 548 1463405 16546d (TOTALS)
patched 1138709 323979 548 1463236 1653c4 (TOTALS)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Convert the inode allocation routines to use active perag references
or references held by callers rather than grab their own. Also drive
the perag further inwards to replace xfs_mounts when doing
operations on a specific AG.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
Callers have referenced perags but they don't pass it into
xfs_imap() so it takes it's own reference. Fix that so we can change
inode allocation over to using active references.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
So that they all output the same information in the traces to make
debugging refcount issues easier.
This means that all the lookup/drop functions no longer need to use
the full memory barrier atomic operations (atomic*_return()) so
will have less overhead when tracing is off. The set/clear tag
tracepoints no longer abuse the reference count to pass the tag -
the tag being cleared is obvious from the _RET_IP_ that is recorded
in the trace point.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
We need to be able to dynamically remove instantiated AGs from
memory safely, either for shrinking the filesystem or paging AG
state in and out of memory (e.g. supporting millions of AGs). This
means we need to be able to safely exclude operations from accessing
perags while dynamic removal is in progress.
To do this, introduce the concept of active and passive references.
Active references are required for high level operations that make
use of an AG for a given operation (e.g. allocation) and pin the
perag in memory for the duration of the operation that is operating
on the perag (e.g. transaction scope). This means we can fail to get
an active reference to an AG, hence callers of the new active
reference API must be able to handle lookup failure gracefully.
Passive references are used in low level code, where we might need
to access the perag structure for the purposes of completing high
level operations. For example, buffers need to use passive
references because:
- we need to be able to do metadata IO during operations like grow
and shrink transactions where high level active references to the
AG have already been blocked
- buffers need to pin the perag until they are reclaimed from
memory, something that high level code has no direct control over.
- unused cached buffers should not prevent a shrink from being
started.
Hence we have active references that will form exclusion barriers
for operations to be performed on an AG, and passive references that
will prevent reclaim of the perag until all objects with passive
references have been reclaimed themselves.
This patch introduce xfs_perag_grab()/xfs_perag_rele() as the API
for active AG reference functionality. We also need to convert the
for_each_perag*() iterators to use active references, which will
start the process of converting high level code over to using active
references. Conversion of non-iterator based code to active
references will be done in followup patches.
Note that the implementation using reference counting is really just
a development vehicle for the API to ensure we don't have any leaks
in the callers. Once we need to remove perag structures from memory
dyanmically, we will need a much more robust per-ag state transition
mechanism for preventing new references from being taken while we
wait for existing references to drain before removal from memory can
occur....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
We can error out of an allocation transaction when updating BMBT
blocks when things go wrong. This can be a btree corruption, and
unexpected ENOSPC, etc. In these cases, we already have deferred ops
queued for the first allocation that has been done, and we just want
to cancel out the transaction and shut down the filesystem on error.
In fact, we do just that for production systems - the assert that we
can't have a transaction with defer ops attached unless we are
already shut down is bogus and gets in the way of debugging
whatever issue is actually causing the transaction to be cancelled.
Remove the assert because it is causing spurious test failures to
hang test machines.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
|
The tp->t_firstblock field is now raelly tracking the highest AG we
have locked, not the block number of the highest allocation we've
made. It's purpose is to prevent AGF locking deadlocks, so rename it
to "highest AG" and simplify the implementation to just track the
agno rather than a fsbno.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
|
