summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2022-05-18io_uring: always use original task when preparing req identityJens Axboe
If the ring is setup with IORING_SETUP_IOPOLL and we have more than one task doing submissions on a ring, we can up in a situation where we assign the context from the current task rather than the request originator. Always use req->task rather than assume it's the same as current. No upstream patch exists for this issue, as only older kernels with the non-native workers have this problem. Reported-by: Kyle Zeng <zengyhkyle@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18SUNRPC: Ensure we flush any closed sockets before xs_xprt_free()Trond Myklebust
commit f00432063db1a0db484e85193eccc6845435b80e upstream. We must ensure that all sockets are closed before we call xprt_free() and release the reference to the net namespace. The problem is that calling fput() will defer closing the socket until delayed_fput() gets called. Let's fix the situation by allowing rpciod and the transport teardown code (which runs on the system wq) to call __fput_sync(), and directly close the socket. Reported-by: Felix Fu <foyjog@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Fixes: a73881c96d73 ("SUNRPC: Fix an Oops in udp_poll()") Cc: stable@vger.kernel.org # 5.1.x: 3be232f11a3c: SUNRPC: Prevent immediate close+reconnect Cc: stable@vger.kernel.org # 5.1.x: 89f42494f92f: SUNRPC: Don't call connect() more than once on a TCP socket Cc: stable@vger.kernel.org # 5.1.x Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Meena Shanmugam <meenashanmugam@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18ceph: fix setting of xattrs on async created inodesJeff Layton
commit 620239d9a32e9fe27c9204ec11e40058671aeeb6 upstream. Currently when we create a file, we spin up an xattr buffer to send along with the create request. If we end up doing an async create however, then we currently pass down a zero-length xattr buffer. Fix the code to send down the xattr buffer in req->r_pagelist. If the xattrs span more than a page, however give up and don't try to do an async create. Cc: stable@vger.kernel.org URL: https://bugzilla.redhat.com/show_bug.cgi?id=2063929 Fixes: 9a8d03ca2e2c ("ceph: attempt to do async create when possible") Reported-by: John Fortin <fortinj66@gmail.com> Reported-by: Sri Ramanujam <sri@ramanujam.io> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18gfs2: Fix filesystem block deallocation for short writesAndreas Gruenbacher
[ Upstream commit d031a8866e709c9d1ee5537a321b6192b4d2dc5b ] When a write cannot be carried out in full, gfs2_iomap_end() releases blocks that have been allocated for this write but haven't been used. To compute the end of the allocation, gfs2_iomap_end() incorrectly rounded the end of the attempted write down to the next block boundary to arrive at the end of the allocation. It would have to round up, but the end of the allocation is also available as iomap->offset + iomap->length, so just use that instead. In addition, use round_up() for computing the start of the unused range. Fixes: 64bc06bb32ee ("gfs2: iomap buffered write support") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18nfs: fix broken handling of the softreval mount optionDan Aloni
[ Upstream commit 085d16d5f949b64713d5e960d6c9bbf51bc1d511 ] Turns out that ever since this mount option was added, passing `softreval` in NFS mount options cancelled all other flags while not affecting the underlying flag `NFS_MOUNT_SOFTREVAL`. Fixes: c74dfe97c104 ("NFS: Add mount option 'softreval'") Signed-off-by: Dan Aloni <dan.aloni@vastdata.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-15arm: remove CONFIG_ARCH_HAS_HOLES_MEMORYMODELMike Rapoport
commit 5e545df3292fbd3d5963c68980f1527ead2a2b3f upstream. ARM is the only architecture that defines CONFIG_ARCH_HAS_HOLES_MEMORYMODEL which in turn enables memmap_valid_within() function that is intended to verify existence of struct page associated with a pfn when there are holes in the memory map. However, the ARCH_HAS_HOLES_MEMORYMODEL also enables HAVE_ARCH_PFN_VALID and arch-specific pfn_valid() implementation that also deals with the holes in the memory map. The only two users of memmap_valid_within() call this function after a call to pfn_valid() so the memmap_valid_within() check becomes redundant. Remove CONFIG_ARCH_HAS_HOLES_MEMORYMODEL and memmap_valid_within() and rely entirely on ARM's implementation of pfn_valid() that is now enabled unconditionally. Link: https://lkml.kernel.org/r/20201101170454.9567-9-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Meelis Roos <mroos@linux.ee> Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: kernel test robot <lkp@intel.com> Fixes: 8dd559d53b3b ("arm: ioremap: don't abuse pfn_valid() to check if pfn is in RAM") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12btrfs: always log symlinks in full modeFilipe Manana
commit d0e64a981fd841cb0f28fcd6afcac55e6f1e6994 upstream. On Linux, empty symlinks are invalid, and attempting to create one with the system call symlink(2) results in an -ENOENT error and this is explicitly documented in the man page. If we rename a symlink that was created in the current transaction and its parent directory was logged before, we actually end up logging the symlink without logging its content, which is stored in an inline extent. That means that after a power failure we can end up with an empty symlink, having no content and an i_size of 0 bytes. It can be easily reproduced like this: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt $ mkdir /mnt/testdir $ sync # Create a file inside the directory and fsync the directory. $ touch /mnt/testdir/foo $ xfs_io -c "fsync" /mnt/testdir # Create a symlink inside the directory and then rename the symlink. $ ln -s /mnt/testdir/foo /mnt/testdir/bar $ mv /mnt/testdir/bar /mnt/testdir/baz # Now fsync again the directory, this persist the log tree. $ xfs_io -c "fsync" /mnt/testdir <power failure> $ mount /dev/sdc /mnt $ stat -c %s /mnt/testdir/baz 0 $ readlink /mnt/testdir/baz $ Fix this by always logging symlinks in full mode (LOG_INODE_ALL), so that their content is also logged. A test case for fstests will follow. CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12NFSv4: Don't invalidate inode attributes on delegation returnTrond Myklebust
commit 00c94ebec5925593c0377b941289224469e72ac7 upstream. There is no need to declare attributes such as the ctime, mtime and block size invalid when we're just returning a delegation, so it is inappropriate to call nfs_post_op_update_inode_force_wcc(). Instead, just call nfs_refresh_inode() after faking up the change attribute. We know that the GETATTR op occurs before the DELEGRETURN, so we are safe when doing this. Fixes: 0bc2c9b4dca9 ("NFSv4: Don't discard the attributes returned by asynchronous DELEGRETURN") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09zonefs: Clear inode information flags on inode creationDamien Le Moal
commit 694852ead287a3433126e7ebda397b242dc99624 upstream. Ensure that the i_flags field of struct zonefs_inode_info is cleared to 0 when initializing a zone file inode, avoiding seeing the flag ZONEFS_ZONE_OPEN being incorrectly set. Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09zonefs: Fix management of open zonesDamien Le Moal
commit 1da18a296f5ba4f99429e62a7cf4fdbefa598902 upstream. The mount option "explicit_open" manages the device open zone resources to ensure that if an application opens a sequential file for writing, the file zone can always be written by explicitly opening the zone and accounting for that state with the s_open_zones counter. However, if some zones are already open when mounting, the device open zone resource usage status will be larger than the initial s_open_zones value of 0. Ensure that this inconsistency does not happen by closing any sequential zone that is open when mounting. Furthermore, with ZNS drives, closing an explicitly open zone that has not been written will change the zone state to "closed", that is, the zone will remain in an active state. Since this can then cause failures of explicit open operations on other zones if the drive active zone resources are exceeded, we need to make sure that the zone is not active anymore by resetting it instead of closing it. To address this, zonefs_zone_mgmt() is modified to change a REQ_OP_ZONE_CLOSE request into a REQ_OP_ZONE_RESET for sequential zones that have not been written. Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close") Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09cifs: destage any unwritten data to the server before calling copychunk_writeRonnie Sahlberg
[ Upstream commit f5d0f921ea362636e4a2efb7c38d1ead373a8700 ] because the copychunk_write might cover a region of the file that has not yet been sent to the server and thus fail. A simple way to reproduce this is: truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with the 'fcollapse 16k 24k' due to write-back caching. fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call and it will fail serverside since the file is still 0b in size serverside until the writes have been destaged. To avoid this we must ensure that we destage any unwritten data to the server before calling COPYCHUNK_WRITE. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373 Reported-by: Xiaoli Feng <xifeng@redhat.com> Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-09ext4: fix bug_on in start_this_handle during umount filesystemYe Bin
[ Upstream commit b98535d091795a79336f520b0708457aacf55c67 ] We got issue as follows: ------------[ cut here ]------------ kernel BUG at fs/jbd2/transaction.c:389! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 9 PID: 131 Comm: kworker/9:1 Not tainted 5.17.0-862.14.0.6.x86_64-00001-g23f87daf7d74-dirty #197 Workqueue: events flush_stashed_error_work RIP: 0010:start_this_handle+0x41c/0x1160 RSP: 0018:ffff888106b47c20 EFLAGS: 00010202 RAX: ffffed10251b8400 RBX: ffff888128dc204c RCX: ffffffffb52972ac RDX: 0000000000000200 RSI: 0000000000000004 RDI: ffff888128dc2050 RBP: 0000000000000039 R08: 0000000000000001 R09: ffffed10251b840a R10: ffff888128dc204f R11: ffffed10251b8409 R12: ffff888116d78000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff888128dc2000 FS: 0000000000000000(0000) GS:ffff88839d680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000001620068 CR3: 0000000376c0e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> jbd2__journal_start+0x38a/0x790 jbd2_journal_start+0x19/0x20 flush_stashed_error_work+0x110/0x2b3 process_one_work+0x688/0x1080 worker_thread+0x8b/0xc50 kthread+0x26f/0x310 ret_from_fork+0x22/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Above issue may happen as follows: umount read procfs error_work ext4_put_super flush_work(&sbi->s_error_work); ext4_mb_seq_groups_show ext4_mb_load_buddy_gfp ext4_mb_init_group ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_error ext4_handle_error schedule_work(&EXT4_SB(sb)->s_error_work); ext4_unregister_sysfs(sb); jbd2_journal_destroy(sbi->s_journal); journal_kill_thread journal->j_flags |= JBD2_UNMOUNT; flush_stashed_error_work jbd2_journal_start start_this_handle BUG_ON(journal->j_flags & JBD2_UNMOUNT); To solve this issue, we call 'ext4_unregister_sysfs() before flushing s_error_work in ext4_put_super(). Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20220322012419.725457-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27jbd2: fix a potential race while discarding reserved buffers after an abortYe Bin
commit 23e3d7f7061f8682c751c46512718f47580ad8f0 upstream. we got issue as follows: [ 72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal [ 72.826847] EXT4-fs (sda): Remounting filesystem read-only fallocate: fallocate failed: Read-only file system [ 74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay [ 74.793597] ------------[ cut here ]------------ [ 74.794203] kernel BUG at fs/jbd2/transaction.c:2063! [ 74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty #150 [ 74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60 [ 74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202 [ 74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90 [ 74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20 [ 74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90 [ 74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00 [ 74.807301] FS: 0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000 [ 74.808338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0 [ 74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 74.811897] Call Trace: [ 74.812241] <TASK> [ 74.812566] __jbd2_journal_refile_buffer+0x12f/0x180 [ 74.813246] jbd2_journal_refile_buffer+0x4c/0xa0 [ 74.813869] jbd2_journal_commit_transaction.cold+0xa1/0x148 [ 74.817550] kjournald2+0xf8/0x3e0 [ 74.819056] kthread+0x153/0x1c0 [ 74.819963] ret_from_fork+0x22/0x30 Above issue may happen as follows: write truncate kjournald2 generic_perform_write ext4_write_begin ext4_walk_page_buffers do_journal_get_write_access ->add BJ_Reserved list ext4_journalled_write_end ext4_walk_page_buffers write_end_fn ext4_handle_dirty_metadata ***************JBD2 ABORT************** jbd2_journal_dirty_metadata -> return -EROFS, jh in reserved_list jbd2_journal_commit_transaction while (commit_transaction->t_reserved_list) jh = commit_transaction->t_reserved_list; truncate_pagecache_range do_invalidatepage ext4_journalled_invalidatepage jbd2_journal_invalidatepage journal_unmap_buffer __dispose_buffer __jbd2_journal_unfile_buffer jbd2_journal_put_journal_head ->put last ref_count __journal_remove_journal_head bh->b_private = NULL; jh->b_bh = NULL; jbd2_journal_refile_buffer(journal, jh); bh = jh2bh(jh); ->bh is NULL, later will trigger null-ptr-deref journal_free_journal_head(jh); After commit 96f1e0974575, we no longer hold the j_state_lock while iterating over the list of reserved handles in jbd2_journal_commit_transaction(). This potentially allows the journal_head to be freed by journal_unmap_buffer while the commit codepath is also trying to free the BJ_Reserved buffers. Keeping j_state_lock held while trying extends hold time of the lock minimally, and solves this issue. Fixes: 96f1e0974575("jbd2: avoid long hold times of j_state_lock while committing a transaction") Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220317142137.1821590-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27ext4: force overhead calculation if the s_overhead_cluster makes no senseTheodore Ts'o
commit 85d825dbf4899a69407338bae462a59aa9a37326 upstream. If the file system does not use bigalloc, calculating the overhead is cheap, so force the recalculation of the overhead so we don't have to trust the precalculated overhead in the superblock. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27ext4: fix overhead calculation to account for the reserved gdt blocksTheodore Ts'o
commit 10b01ee92df52c8d7200afead4d5e5f55a5c58b1 upstream. The kernel calculation was underestimating the overhead by not taking into account the reserved gdt blocks. With this change, the overhead calculated by the kernel matches the overhead calculation in mke2fs. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27ext4: limit length to bitmap_maxbytes - blocksize in punch_holeTadeusz Struk
commit 2da376228a2427501feb9d15815a45dbdbdd753e upstream. Syzbot found an issue [1] in ext4_fallocate(). The C reproducer [2] calls fallocate(), passing size 0xffeffeff000ul, and offset 0x1000000ul, which, when added together exceed the bitmap_maxbytes for the inode. This triggers a BUG in ext4_ind_remove_space(). According to the comments in this function the 'end' parameter needs to be one block after the last block to be removed. In the case when the BUG is triggered it points to the last block. Modify the ext4_punch_hole() function and add constraint that caps the length to satisfy the one before laster block requirement. LINK: [1] https://syzkaller.appspot.com/bug?id=b80bd9cf348aac724a4f4dff251800106d721331 LINK: [2] https://syzkaller.appspot.com/text?tag=ReproC&x=14ba0238700000 Fixes: a4bb6b64e39a ("ext4: enable "punch hole" functionality") Reported-by: syzbot+7a806094edd5d07ba029@syzkaller.appspotmail.com Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org> Link: https://lore.kernel.org/r/20220331200515.153214-1-tadeusz.struk@linaro.org Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27ext4: fix use-after-free in ext4_search_dirYe Bin
commit c186f0887fe7061a35cebef024550ec33ef8fbd8 upstream. We got issue as follows: EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue ================================================================== BUG: KASAN: use-after-free in ext4_search_dir fs/ext4/namei.c:1394 [inline] BUG: KASAN: use-after-free in search_dirblock fs/ext4/namei.c:1199 [inline] BUG: KASAN: use-after-free in __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553 Read of size 1 at addr ffff8881317c3005 by task syz-executor117/2331 CPU: 1 PID: 2331 Comm: syz-executor117 Not tainted 5.10.0+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:83 [inline] dump_stack+0x144/0x187 lib/dump_stack.c:124 print_address_description+0x7d/0x630 mm/kasan/report.c:387 __kasan_report+0x132/0x190 mm/kasan/report.c:547 kasan_report+0x47/0x60 mm/kasan/report.c:564 ext4_search_dir fs/ext4/namei.c:1394 [inline] search_dirblock fs/ext4/namei.c:1199 [inline] __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553 ext4_lookup_entry fs/ext4/namei.c:1622 [inline] ext4_lookup+0xb8/0x3a0 fs/ext4/namei.c:1690 __lookup_hash+0xc5/0x190 fs/namei.c:1451 do_rmdir+0x19e/0x310 fs/namei.c:3760 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x445e59 Code: 4d c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff2277fac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000054 RAX: ffffffffffffffda RBX: 0000000000400280 RCX: 0000000000445e59 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000002 R10: 00007fff2277f990 R11: 0000000000000246 R12: 0000000000000000 R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:0000000048cd3304 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x1317c3 flags: 0x200000000000000() raw: 0200000000000000 ffffea0004526588 ffffea0004528088 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881317c2f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881317c2f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881317c3000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8881317c3080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8881317c3100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== ext4_search_dir: ... de = (struct ext4_dir_entry_2 *)search_buf; dlimit = search_buf + buf_size; while ((char *) de < dlimit) { ... if ((char *) de + de->name_len <= dlimit && ext4_match(dir, fname, de)) { ... } ... de_len = ext4_rec_len_from_disk(de->rec_len, dir->i_sb->s_blocksize); if (de_len <= 0) return -1; offset += de_len; de = (struct ext4_dir_entry_2 *) ((char *) de + de_len); } Assume: de=0xffff8881317c2fff dlimit=0x0xffff8881317c3000 If read 'de->name_len' which address is 0xffff8881317c3005, obviously is out of range, then will trigger use-after-free. To solve this issue, 'dlimit' must reserve 8 bytes, as we will read 'de->name_len' to judge if '(char *) de + de->name_len' out of range. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220324064816.1209985-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27ext4: fix symlink file size not match to file contentYe Bin
commit a2b0b205d125f27cddfb4f7280e39affdaf46686 upstream. We got issue as follows: [home]# fsck.ext4 -fn ram0yb e2fsck 1.45.6 (20-Mar-2020) Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Symlink /p3/d14/d1a/l3d (inode #3494) is invalid. Clear? no Entry 'l3d' in /p3/d14/d1a (3383) has an incorrect filetype (was 7, should be 0). Fix? no As the symlink file size does not match the file content. If the writeback of the symlink data block failed, ext4_finish_bio() handles the end of IO. However this function fails to mark the buffer with BH_write_io_error and so when unmount does journal checkpoint it cannot detect the writeback error and will cleanup the journal. Thus we've lost the correct data in the journal area. To solve this issue, mark the buffer as BH_write_io_error in ext4_finish_bio(). Cc: stable@kernel.org Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220321144438.201685-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27ext4: fix fallocate to use file_modified to update permissions consistentlyDarrick J. Wong
commit ad5cd4f4ee4d5fcdb1bfb7a0c073072961e70783 upstream. Since the initial introduction of (posix) fallocate back at the turn of the century, it has been possible to use this syscall to change the user-visible contents of files. This can happen by extending the file size during a preallocation, or through any of the newer modes (punch, zero, collapse, insert range). Because the call can be used to change file contents, we should treat it like we do any other modification to a file -- update the mtime, and drop set[ug]id privileges/capabilities. The VFS function file_modified() does all this for us if pass it a locked inode, so let's make fallocate drop permissions correctly. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Link: https://lore.kernel.org/r/20220308185043.GA117678@magnolia Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27mm, hugetlb: allow for "high" userspace addressesChristophe Leroy
commit 5f24d5a579d1eace79d505b148808a850b417d4c upstream. This is a fix for commit f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") for hugetlb. This patch adds support for "high" userspace addresses that are optionally supported on the system and have to be requested via a hint mechanism ("high" addr parameter to mmap). Architectures such as powerpc and x86 achieve this by making changes to their architectural versions of hugetlb_get_unmapped_area() function. However, arm64 uses the generic version of that function. So take into account arch_get_mmap_base() and arch_get_mmap_end() in hugetlb_get_unmapped_area(). To allow that, move those two macros out of mm/mmap.c into include/linux/sched/mm.h If these macros are not defined in architectural code then they default to (TASK_SIZE) and (base) so should not introduce any behavioural changes to architectures that do not define them. For the time being, only ARM64 is affected by this change. Catalin (ARM64) said "We should have fixed hugetlb_get_unmapped_area() as well when we added support for 52-bit VA. The reason for commit f6795053dac8 was to prevent normal mmap() from returning addresses above 48-bit by default as some user-space had hard assumptions about this. It's a slight ABI change if you do this for hugetlb_get_unmapped_area() but I doubt anyone would notice. It's more likely that the current behaviour would cause issues, so I'd rather have them consistent. Basically when arm64 gained support for 52-bit addresses we did not want user-space calling mmap() to suddenly get such high addresses, otherwise we could have inadvertently broken some programs (similar behaviour to x86 here). Hence we added commit f6795053dac8. But we missed hugetlbfs which could still get such high mmap() addresses. So in theory that's a potential regression that should have bee addressed at the same time as commit f6795053dac8 (and before arm64 enabled 52-bit addresses)" Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu Fixes: f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: <stable@vger.kernel.org> [5.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27stat: fix inconsistency between struct stat and struct compat_statMikulas Patocka
[ Upstream commit 932aba1e169090357a77af18850a10c256b50819 ] struct stat (defined in arch/x86/include/uapi/asm/stat.h) has 32-bit st_dev and st_rdev; struct compat_stat (defined in arch/x86/include/asm/compat.h) has 16-bit st_dev and st_rdev followed by a 16-bit padding. This patch fixes struct compat_stat to match struct stat. [ Historical note: the old x86 'struct stat' did have that 16-bit field that the compat layer had kept around, but it was changes back in 2003 by "struct stat - support larger dev_t": https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=e95b2065677fe32512a597a79db94b77b90c968d and back in those days, the x86_64 port was still new, and separate from the i386 code, and had already picked up the old version with a 16-bit st_dev field ] Note that we can't change compat_dev_t because it is used by compat_loop_info. Also, if the st_dev and st_rdev values are 32-bit, we don't have to use old_valid_dev to test if the value fits into them. This fixes -EOVERFLOW on filesystems that are on NVMe because NVMe uses the major number 259. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27cifs: Check the IOCB_DIRECT flag, not O_DIRECTDavid Howells
[ Upstream commit 994fd530a512597ffcd713b0f6d5bc916c5698f0 ] Use the IOCB_DIRECT indicator flag on the I/O context rather than checking to see if the file was opened O_DIRECT. Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: linux-cifs@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27gfs2: assign rgrp glock before compute_bitstructsBob Peterson
commit 428f651cb80b227af47fc302e4931791f2fb4741 upstream. Before this patch, function read_rindex_entry called compute_bitstructs before it allocated a glock for the rgrp. But if compute_bitstructs found a problem with the rgrp, it called gfs2_consist_rgrpd, and that called gfs2_dump_glock for rgd->rd_gl which had not yet been assigned. read_rindex_entry compute_bitstructs gfs2_consist_rgrpd gfs2_dump_glock <---------rgd->rd_gl was not set. This patch changes read_rindex_entry so it assigns an rgrp glock before calling compute_bitstructs so gfs2_dump_glock does not reference an unassigned pointer. If an error is discovered, the glock must also be put, so a new goto and label were added. Reported-by: syzbot+c6fd14145e2f62ca0784@syzkaller.appspotmail.com Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20btrfs: mark resumed async balance as writingNaohiro Aota
commit a690e5f2db4d1dca742ce734aaff9f3112d63764 upstream. When btrfs balance is interrupted with umount, the background balance resumes on the next mount. There is a potential deadlock with FS freezing here like as described in commit 26559780b953 ("btrfs: zoned: mark relocation as writing"). Mark the process as sb_writing to avoid it. Reviewed-by: Filipe Manana <fdmanana@suse.com> CC: stable@vger.kernel.org # 4.9+ Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20btrfs: fix root ref counts in error handling in btrfs_get_root_refJia-Ju Bai
commit 168a2f776b9762f4021421008512dd7ab7474df1 upstream. In btrfs_get_root_ref(), when btrfs_insert_fs_root() fails, btrfs_put_root() can happen for two reasons: - the root already exists in the tree, in that case it returns the reference obtained in btrfs_lookup_fs_root() - another error so the cleanup is done in the fail label Calling btrfs_put_root() unconditionally would lead to double decrement of the root reference possibly freeing it in the second case. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Fixes: bc44d7c4b2b1 ("btrfs: push btrfs_grab_fs_root into btrfs_get_fs_root") CC: stable@vger.kernel.org # 5.10+ Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20btrfs: do not warn for free space inode in cow_file_rangeJosef Bacik
[ Upstream commit a7d16d9a07bbcb7dcd5214a1bea75c808830bc0d ] This is a long time leftover from when I originally added the free space inode, the point was to catch cases where we weren't honoring the NOCOW flag. However there exists a race with relocation, if we allocate our free space inode in a block group that is about to be relocated, we could trigger the COW path before the relocation has the opportunity to find the extents and delete the free space cache. In production where we have auto-relocation enabled we're seeing this WARN_ON_ONCE() around 5k times in a 2 week period, so not super common but enough that it's at the top of our metrics. We're properly handling the error here, and with us phasing out v1 space cache anyway just drop the WARN_ON_ONCE. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20btrfs: fix fallocate to use file_modified to update permissions consistentlyDarrick J. Wong
[ Upstream commit 05fd9564e9faf0f23b4676385e27d9405cef6637 ] Since the initial introduction of (posix) fallocate back at the turn of the century, it has been possible to use this syscall to change the user-visible contents of files. This can happen by extending the file size during a preallocation, or through any of the newer modes (punch, zero range). Because the call can be used to change file contents, we should treat it like we do any other modification to a file -- update the mtime, and drop set[ug]id privileges/capabilities. The VFS function file_modified() does all this for us if pass it a locked inode, so let's make fallocate drop permissions correctly. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20cifs: potential buffer overflow in handling symlinksHarshit Mogalapalli
[ Upstream commit 64c4a37ac04eeb43c42d272f6e6c8c12bfcf4304 ] Smatch printed a warning: arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error: __memcpy() 'dctx->buf' too small (16 vs u32max) It's caused because Smatch marks 'link_len' as untrusted since it comes from sscanf(). Add a check to ensure that 'link_len' is not larger than the size of the 'link_str' buffer. Fixes: c69c1b6eaea1 ("cifs: implement CIFSParseMFSymlink()") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups()Nathan Chancellor
commit 6d4a6b515c39f1f8763093e0f828959b2fbc2f45 upstream. Clang's version of -Wunused-but-set-variable recently gained support for unary operations, which reveals two unused variables: fs/btrfs/block-group.c:2949:6: error: variable 'num_started' set but not used [-Werror,-Wunused-but-set-variable] int num_started = 0; ^ fs/btrfs/block-group.c:3116:6: error: variable 'num_started' set but not used [-Werror,-Wunused-but-set-variable] int num_started = 0; ^ 2 errors generated. These variables appear to be unused from their introduction, so just remove them to silence the warnings. Fixes: c9dc4c657850 ("Btrfs: two stage dirty block group writeout") Fixes: 1bbc621ef284 ("Btrfs: allow block group cache writeout outside critical section in commit") CC: stable@vger.kernel.org # 5.4+ Link: https://github.com/ClangBuiltLinux/linux/issues/1614 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13btrfs: prevent subvol with swapfile from being deletedKaiwen Hu
commit 60021bd754c6ca0addc6817994f20290a321d8d6 upstream. A subvolume with an active swapfile must not be deleted otherwise it would not be possible to deactivate it. After the subvolume is deleted, we cannot swapoff the swapfile in this deleted subvolume because the path is unreachable. The swapfile is still active and holding references, the filesystem cannot be unmounted. The test looks like this: mkfs.btrfs -f $dev > /dev/null mount $dev $mnt btrfs sub create $mnt/subvol touch $mnt/subvol/swapfile chmod 600 $mnt/subvol/swapfile chattr +C $mnt/subvol/swapfile dd if=/dev/zero of=$mnt/subvol/swapfile bs=1K count=4096 mkswap $mnt/subvol/swapfile swapon $mnt/subvol/swapfile btrfs sub delete $mnt/subvol swapoff $mnt/subvol/swapfile # failed: No such file or directory swapoff --all unmount $mnt # target is busy. To prevent above issue, we simply check that whether the subvolume contains any active swapfile, and stop the deleting process. This behavior is like snapshot ioctl dealing with a swapfile. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Robbie Ko <robbieko@synology.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Kaiwen Hu <kevinhu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13btrfs: fix qgroup reserve overflow the qgroup limitEthan Lien
commit b642b52d0b50f4d398cb4293f64992d0eed2e2ce upstream. We use extent_changeset->bytes_changed in qgroup_reserve_data() to record how many bytes we set for EXTENT_QGROUP_RESERVED state. Currently the bytes_changed is set as "unsigned int", and it will overflow if we try to fallocate a range larger than 4GiB. The result is we reserve less bytes and eventually break the qgroup limit. Unlike regular buffered/direct write, which we use one changeset for each ordered extent, which can never be larger than 256M. For fallocate, we use one changeset for the whole range, thus it no longer respects the 256M per extent limit, and caused the problem. The following example test script reproduces the problem: $ cat qgroup-overflow.sh #!/bin/bash DEV=/dev/sdj MNT=/mnt/sdj mkfs.btrfs -f $DEV mount $DEV $MNT # Set qgroup limit to 2GiB. btrfs quota enable $MNT btrfs qgroup limit 2G $MNT # Try to fallocate a 3GiB file. This should fail. echo echo "Try to fallocate a 3GiB file..." fallocate -l 3G $MNT/3G.file # Try to fallocate a 5GiB file. echo echo "Try to fallocate a 5GiB file..." fallocate -l 5G $MNT/5G.file # See we break the qgroup limit. echo sync btrfs qgroup show -r $MNT umount $MNT When running the test: $ ./qgroup-overflow.sh (...) Try to fallocate a 3GiB file... fallocate: fallocate failed: Disk quota exceeded Try to fallocate a 5GiB file... qgroupid         rfer         excl     max_rfer --------         ----         ----     -------- 0/5           5.00GiB      5.00GiB      2.00GiB Since we have no control of how bytes_changed is used, it's better to set it to u64. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Ethan Lien <ethanlien@synology.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13io_uring: fix race between timeout flush and removalJens Axboe
commit e677edbcabee849bfdd43f1602bccbecf736a646 upstream. io_flush_timeouts() assumes the timeout isn't in progress of triggering or being removed/canceled, so it unconditionally removes it from the timeout list and attempts to cancel it. Leave it on the list and let the normal timeout cancelation take care of it. Cc: stable@vger.kernel.org # 5.5+ Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-13io_uring: don't touch scm_fp_list after queueing skbPavel Begunkov
[ Upstream commit a07211e3001435fe8591b992464cd8d5e3c98c5a ] It's safer to not touch scm_fp_list after we queued an skb to which it was assigned, there might be races lurking if we screw subtle sync guarantees on the io_uring side. Fixes: 6b06314c47e14 ("io_uring: add file set registration") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13NFSv4: fix open failure with O_ACCMODE flagChenXiaoSong
[ Upstream commit b243874f6f9568b2daf1a00e9222cacdc15e159c ] open() with O_ACCMODE|O_DIRECT flags secondly will fail. Reproducer: 1. mount -t nfs -o vers=4.2 $server_ip:/ /mnt/ 2. fd = open("/mnt/file", O_ACCMODE|O_DIRECT|O_CREAT) 3. close(fd) 4. fd = open("/mnt/file", O_ACCMODE|O_DIRECT) Server nfsd4_decode_share_access() will fail with error nfserr_bad_xdr when client use incorrect share access mode of 0. Fix this by using NFS4_SHARE_ACCESS_BOTH share access mode in client, just like firstly opening. Fixes: ce4ef7c0a8a05 ("NFS: Split out NFS v4 file operations") Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13Revert "NFSv4: Handle the special Linux file open access mode"ChenXiaoSong
[ Upstream commit ab0fc21bc7105b54bafd85bd8b82742f9e68898a ] This reverts commit 44942b4e457beda00981f616402a1a791e8c616e. After secondly opening a file with O_ACCMODE|O_DIRECT flags, nfs4_valid_open_stateid() will dereference NULL nfs4_state when lseek(). Reproducer: 1. mount -t nfs -o vers=4.2 $server_ip:/ /mnt/ 2. fd = open("/mnt/file", O_ACCMODE|O_DIRECT|O_CREAT) 3. close(fd) 4. fd = open("/mnt/file", O_ACCMODE|O_DIRECT) 5. lseek(fd) Reported-by: Lyu Tao <tao.lyu@epfl.ch> Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13NFS: Avoid writeback threads getting stuck in mempool_alloc()Trond Myklebust
[ Upstream commit 0bae835b63c53f86cdc524f5962e39409585b22c ] In a low memory situation, allow the NFS writeback code to fail without getting stuck in infinite loops in mempool_alloc(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13NFS: nfsiod should not block forever in mempool_alloc()Trond Myklebust
[ Upstream commit 515dcdcd48736576c6f5c197814da6f81c60a21e ] The concern is that since nfsiod is sometimes required to kick off a commit, it can get locked up waiting forever in mempool_alloc() instead of failing gracefully and leaving the commit until later. Try to allocate from the slab first, with GFP_KERNEL | __GFP_NORETRY, then fall back to a non-blocking attempt to allocate from the memory pool. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13jfs: prevent NULL deref in diFreeHaimin Zhang
[ Upstream commit a53046291020ec41e09181396c1e829287b48d47 ] Add validation check for JFS_IP(ipimap)->i_imap to prevent a NULL deref in diFree since diFree uses it without do any validations. When function jfs_mount calls diMount to initialize fileset inode allocation map, it can fail and JFS_IP(ipimap)->i_imap won't be initialized. Then it calls diFreeSpecial to close fileset inode allocation map inode and it will flow into jfs_evict_inode. Function jfs_evict_inode just validates JFS_SBI(inode->i_sb)->ipimap, then calls diFree. diFree use JFS_IP(ipimap)->i_imap directly, then it will cause a NULL deref. Reported-by: TCS Robot <tcs_robot@tencent.com> Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13NFS: swap-out must always use STABLE writes.NeilBrown
[ Upstream commit c265de257f558a05c1859ee9e3fed04883b9ec0e ] The commit handling code is not safe against memory-pressure deadlocks when writing to swap. In particular, nfs_commitdata_alloc() blocks indefinitely waiting for memory, and this can consume all available workqueue threads. swap-out most likely uses STABLE writes anyway as COND_STABLE indicates that a stable write should be used if the write fits in a single request, and it normally does. However if we ever swap with a small wsize, or gather unusually large numbers of pages for a single write, this might change. For safety, make it explicit in the code that direct writes used for swap must always use FLUSH_STABLE. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13NFS: swap IO handling is slightly different for O_DIRECT IONeilBrown
[ Upstream commit 64158668ac8b31626a8ce48db4cad08496eb8340 ] 1/ Taking the i_rwsem for swap IO triggers lockdep warnings regarding possible deadlocks with "fs_reclaim". These deadlocks could, I believe, eventuate if a buffered read on the swapfile was attempted. We don't need coherence with the page cache for a swap file, and buffered writes are forbidden anyway. There is no other need for i_rwsem during direct IO. So never take it for swap_rw() 2/ generic_write_checks() explicitly forbids writes to swap, and performs checks that are not needed for swap. So bypass it for swap_rw(). Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13NFSv4: Protect the state recovery thread against direct reclaimTrond Myklebust
[ Upstream commit 3e17898aca293a24dae757a440a50aa63ca29671 ] If memory allocation triggers a direct reclaim from the state recovery thread, then we can deadlock. Use memalloc_nofs_save/restore to ensure that doesn't happen. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13NFSv4.2: fix reference count leaks in _nfs42_proc_copy_notify()Xin Xiong
[ Upstream commit b7f114edd54326f730a754547e7cfb197b5bc132 ] [You don't often get email from xiongx18@fudan.edu.cn. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.] The reference counting issue happens in two error paths in the function _nfs42_proc_copy_notify(). In both error paths, the function simply returns the error code and forgets to balance the refcount of object `ctx`, bumped by get_nfs_open_context() earlier, which may cause refcount leaks. Fix it by balancing refcount of the `ctx` object before the function returns in both error paths. Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13minix: fix bug when opening a file with O_DIRECTQinghua Jin
[ Upstream commit 9ce3c0d26c42d279b6c378a03cd6a61d828f19ca ] Testcase: 1. create a minix file system and mount it 2. open a file on the file system with O_RDWR|O_CREAT|O_TRUNC|O_DIRECT 3. open fails with -EINVAL but leaves an empty file behind. All other open() failures don't leave the failed open files behind. It is hard to check the direct_IO op before creating the inode. Just as ext4 and btrfs do, this patch will resolve the issue by allowing to create the file with O_DIRECT but returning error when writing the file. Link: https://lkml.kernel.org/r/20220107133626.413379-1-qhjin.dev@gmail.com Signed-off-by: Qinghua Jin <qhjin.dev@gmail.com> Reported-by: Colin Ian King <colin.king@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13ceph: fix memory leak in ceph_readdir when note_last_dentry returns errorXiubo Li
[ Upstream commit f639d9867eea647005dc824e0e24f39ffc50d4e4 ] Reset the last_readdir at the same time, and add a comment explaining why we don't free last_readdir when dir_emit returns false. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13gfs2: gfs2_setattr_size error path fixAndreas Gruenbacher
[ Upstream commit 7336905a89f19173bf9301cd50a24421162f417c ] When gfs2_setattr_size() fails, it calls gfs2_rs_delete(ip, NULL) to get rid of any reservations the inode may have. Instead, it should pass in the inode's write count as the second parameter to allow gfs2_rs_delete() to figure out if the inode has any writers left. In a next step, there are two instances of gfs2_rs_delete(ip, NULL) left where we know that there can be no other users of the inode. Replace those with gfs2_rs_deltree(&ip->i_res) to avoid the unnecessary write count check. With that, gfs2_rs_delete() is only called with the inode's actual write count, so get rid of the second parameter. Fixes: a097dc7e24cb ("GFS2: Make rgrp reservations part of the gfs2_inode structure") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13gfs2: Fix gfs2_release for non-writers regressionBob Peterson
[ Upstream commit d3add1a9519dcacd6e644ecac741c56cf18b67f5 ] When a file is opened for writing, the vfs code (do_dentry_open) calls get_write_access for the inode, thus incrementing the inode's write count. That writer normally then creates a multi-block reservation for the inode (i_res) that can be re-used by other writers, which speeds up writes for applications that stupidly loop on open/write/close. When the writes are all done, the multi-block reservation should be deleted when the file is closed by the last "writer." Commit 0ec9b9ea4f83 broke that concept when it moved the call to gfs2_rs_delete before the check for FMODE_WRITE. Non-writers have no business removing the multi-block reservations of writers. In fact, if someone opens and closes the file for RO while a writer has a multi-block reservation, the RO closer will delete the reservation midway through the write, and this results in: kernel BUG at fs/gfs2/rgrp.c:677! (or thereabouts) which is: BUG_ON(rs->rs_requested); from function gfs2_rs_deltree. This patch moves the check back inside the check for FMODE_WRITE. Fixes: 0ec9b9ea4f83 ("gfs2: Check for active reservation in gfs2_release") Cc: stable@vger.kernel.org # v5.12+ Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13gfs2: Check for active reservation in gfs2_releaseAndreas Gruenbacher
[ Upstream commit 0ec9b9ea4f83303bfd8f052a3d8b2bd179b002e1 ] In gfs2_release, check if the inode has an active reservation to avoid unnecessary lock taking. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-13ubifs: Rectify space amount budget for mkdir/tmpfile operationsZhihao Cheng
[ Upstream commit a6dab6607d4681d227905d5198710b575dbdb519 ] UBIFS should make sure the flash has enough space to store dirty (Data that is newer than disk) data (in memory), space budget is exactly designed to do that. If space budget calculates less data than we need, 'make_reservation()' will do more work(return -ENOSPC if no free space lelf, sometimes we can see "cannot reserve xxx bytes in jhead xxx, error -28" in ubifs error messages) with ubifs inodes locked, which may effect other syscalls. A simple way to decide how much space do we need when make a budget: See how much space is needed by 'make_reservation()' in ubifs_jnl_xxx() function according to corresponding operation. It's better to report ENOSPC in ubifs_budget_space(), as early as we can. Fixes: 474b93704f32163 ("ubifs: Implement O_TMPFILE") Fixes: 1e51764a3c2ac05 ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-08coredump: Use the vma snapshot in fill_files_noteEric W. Biederman
commit 390031c942116d4733310f0684beb8db19885fe6 upstream. Matthew Wilcox reported that there is a missing mmap_lock in file_files_note that could possibly lead to a user after free. Solve this by using the existing vma snapshot for consistency and to avoid the need to take the mmap_lock anywhere in the coredump code except for dump_vma_snapshot. Update the dump_vma_snapshot to capture vm_pgoff and vm_file that are neeeded by fill_files_note. Add free_vma_snapshot to free the captured values of vm_file. Reported-by: Matthew Wilcox <willy@infradead.org> Link: https://lkml.kernel.org/r/20220131153740.2396974-1-willy@infradead.org Cc: stable@vger.kernel.org Fixes: a07279c9a8cd ("binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot") Fixes: 2aa362c49c31 ("coredump: extend core dump note section to contain file names of mapped files") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-08coredump/elf: Pass coredump_params into fill_note_infoEric W. Biederman
commit 9ec7d3230717b4fe9b6c7afeb4811909c23fa1d7 upstream. Instead of individually passing cprm->siginfo and cprm->regs into fill_note_info pass all of struct coredump_params. This is preparation to allow fill_files_note to use the existing vma snapshot. Reviewed-by: Jann Horn <jannh@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-02 19:04:49 +0000