| Age | Commit message (Collapse) | Author |
|---|
|
Remove the definitions for these ioctls, since the functionality (and,
weirdly, the 32-bit compat ioctl definitions) were removed from the
kernel in November 2019.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
While I was auditing the code in xfs_repair that adds feature bits to
existing V5 filesystems, I decided to have a look at how online fsck
handles feature bits, and I found a few problems:
1) ATTR2 is added to the primary super when an xattr is set to a file,
but that isn't consistently propagated to secondary supers. This isn't
a corruption, merely a discrepancy that repair will fix if it ever has
to restore the primary from a secondary. Hence, if we find a mismatch
on a secondary, this is a preen condition, not a corruption.
2) There are more compat and ro_compat features now than there used to
be, but we mask off the newer features from testing. This means we
ignore inconsistencies in the INOBTCOUNT and BIGTIME features, which is
wrong. Get rid of the masking and compare directly.
3) NEEDSREPAIR, when set on a secondary, is ignored by everyone. Hence
a mismatch here should also be flagged for preening, and online repair
should clear the flag. Right now we ignore it due to (2).
4) log_incompat features are ephemeral, since we can clear the feature
bit as soon as the log no longer contains live records for a particular
log feature. As such, the only copy we care about is the one in the
primary super. If we find any bits set in the secondary super, we
should flag that for preening, and clear the bits if the user elects to
repair it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
I was poking around in the directory code while diagnosing online fsck
bugs, and noticed that xfs_readdir doesn't actually take the directory
ILOCK when it calls xfs_dir2_isblock. xfs_dir_open most probably loaded
the data fork mappings and the VFS took i_rwsem (aka IOLOCK_SHARED) so
we're protected against writer threads, but we really need to follow the
locking model like we do in other places.
To avoid unnecessarily cycling the ILOCK for fairly small directories,
change the block/leaf _getdents functions to consume the ILOCK hold that
the parent readdir function took to decide on a _getdents implementation.
It is ok to cycle the ILOCK in readdir because the VFS takes the IOLOCK
in the appropriate mode during lookups and writes, and we don't want to
be holding the ILOCK when we copy directory entries to userspace in case
there's a page fault. We really only need it to protect against data
fork lookups, like we do for other files.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Inodes aren't supposed to have a project id of -1U (aka 4294967295) but
the kernel hasn't always validated FSSETXATTR correctly. Flag this as
something for the sysadmin to check out.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Online fsck depends on callers holding ILOCK_EXCL from the time they
decide to update a block mapping until after they've updated the reverse
mapping records to guarantee the stability of both mapping records.
Unfortunately, the quota code drops ILOCK_EXCL at the first transaction
roll in the dquot allocation process, which breaks that assertion. This
leads to sporadic failures in the online rmap repair code if the repair
code grabs the AGF after bmapi_write maps a new block into the quota
file's data fork but before it can finish the deferred rmap update.
Fix this by rewriting the function to hold the ILOCK until after the
transaction commit like all other bmap updates do, and get rid of the
dqread wrapper that does nothing but complicate the codebase.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
mp is being initialized to log->l_mp but this is never read
as record is overwritten later on. Remove the redundant
assignment.
Cleans up the following clang-analyzer warning:
fs/xfs/xfs_log_recover.c:3543:20: warning: Value stored to 'mp' during
its initialization is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Oh, let me count the ways that the kvmalloc API sucks dog eggs.
The problem is when we are logging lots of large objects, we hit
kvmalloc really damn hard with costly order allocations, and
behaviour utterly sucks:
- 49.73% xlog_cil_commit
- 31.62% kvmalloc_node
- 29.96% __kmalloc_node
- 29.38% kmalloc_large_node
- 29.33% __alloc_pages
- 24.33% __alloc_pages_slowpath.constprop.0
- 18.35% __alloc_pages_direct_compact
- 17.39% try_to_compact_pages
- compact_zone_order
- 15.26% compact_zone
5.29% __pageblock_pfn_to_page
3.71% PageHuge
- 1.44% isolate_migratepages_block
0.71% set_pfnblock_flags_mask
1.11% get_pfnblock_flags_mask
- 0.81% get_page_from_freelist
- 0.59% _raw_spin_lock_irqsave
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
- 3.24% try_to_free_pages
- 3.14% shrink_node
- 2.94% shrink_slab.constprop.0
- 0.89% super_cache_count
- 0.66% xfs_fs_nr_cached_objects
- 0.65% xfs_reclaim_inodes_count
0.55% xfs_perag_get_tag
0.58% kfree_rcu_shrink_count
- 2.09% get_page_from_freelist
- 1.03% _raw_spin_lock_irqsave
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
- 4.88% get_page_from_freelist
- 3.66% _raw_spin_lock_irqsave
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
- 1.63% __vmalloc_node
- __vmalloc_node_range
- 1.10% __alloc_pages_bulk
- 0.93% __alloc_pages
- 0.92% get_page_from_freelist
- 0.89% rmqueue_bulk
- 0.69% _raw_spin_lock
- do_raw_spin_lock
__pv_queued_spin_lock_slowpath
13.73% memcpy_erms
- 2.22% kvfree
On this workload, that's almost a dozen CPUs all trying to compact
and reclaim memory inside kvmalloc_node at the same time. Yet it is
regularly falling back to vmalloc despite all that compaction, page
and shrinker reclaim that direct reclaim is doing. Copying all the
metadata is taking far less CPU time than allocating the storage!
Direct reclaim should be considered extremely harmful.
This is a high frequency, high throughput, CPU usage and latency
sensitive allocation. We've got memory there, and we're using
kvmalloc to allow memory allocation to avoid doing lots of work to
try to do contiguous allocations.
Except it still does *lots of costly work* that is unnecessary.
Worse: the only way to avoid the slowpath page allocation trying to
do compaction on costly allocations is to turn off direct reclaim
(i.e. remove __GFP_RECLAIM_DIRECT from the gfp flags).
Unfortunately, the stupid kvmalloc API then says "oh, this isn't a
GFP_KERNEL allocation context, so you only get kmalloc!". This
cuts off the vmalloc fallback, and this leads to almost instant OOM
problems which ends up in filesystems deadlocks, shutdowns and/or
kernel crashes.
I want some basic kvmalloc behaviour:
- kmalloc for a contiguous range with fail fast semantics - no
compaction direct reclaim if the allocation enters the slow path.
- run normal vmalloc (i.e. GFP_KERNEL) if kmalloc fails
The really, really stupid part about this is these kvmalloc() calls
are run under memalloc_nofs task context, so all the allocations are
always reduced to GFP_NOFS regardless of the fact that kvmalloc
requires GFP_KERNEL to be passed in. IOWs, we're already telling
kvmalloc to behave differently to the gfp flags we pass in, but it
still won't allow vmalloc to be run with anything other than
GFP_KERNEL.
So, this patch open codes the kvmalloc() in the commit path to have
the above described behaviour. The result is we more than halve the
CPU time spend doing kvmalloc() in this path and transaction commits
with 64kB objects in them more than doubles. i.e. we get ~5x
reduction in CPU usage per costly-sized kvmalloc() invocation and
the profile looks like this:
- 37.60% xlog_cil_commit
16.01% memcpy_erms
- 8.45% __kmalloc
- 8.04% kmalloc_order_trace
- 8.03% kmalloc_order
- 7.93% alloc_pages
- 7.90% __alloc_pages
- 4.05% __alloc_pages_slowpath.constprop.0
- 2.18% get_page_from_freelist
- 1.77% wake_all_kswapds
....
- __wake_up_common_lock
- 0.94% _raw_spin_lock_irqsave
- 3.72% get_page_from_freelist
- 2.43% _raw_spin_lock_irqsave
- 5.72% vmalloc
- 5.72% __vmalloc_node_range
- 4.81% __get_vm_area_node.constprop.0
- 3.26% alloc_vmap_area
- 2.52% _raw_spin_lock
- 1.46% _raw_spin_lock
0.56% __alloc_pages_bulk
- 4.66% kvfree
- 3.25% vfree
- __vfree
- 3.23% __vunmap
- 1.95% remove_vm_area
- 1.06% free_vmap_area_noflush
- 0.82% _raw_spin_lock
- 0.68% _raw_spin_lock
- 0.92% _raw_spin_lock
- 1.40% kfree
- 1.36% __free_pages
- 1.35% __free_pages_ok
- 1.02% _raw_spin_lock_irqsave
It's worth noting that over 50% of the CPU time spent allocating
these shadow buffers is now spent on spinlocks. So the shadow buffer
allocation overhead is greatly reduced by getting rid of direct
reclaim from kmalloc, and could probably be made even less costly if
vmalloc() didn't use global spinlocks to protect it's structures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the xfs sysfs code to use default_groups field which has
been the preferred way since aa30f47cf666 ("kobject: Add support for
default attribute groups to kobj_type") so that we can soon get rid of
the obsolete default_attrs field.
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: linux-xfs@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
While I was running with KASAN and lockdep enabled, I stumbled upon an
KASAN report about a UAF to a freed CIL checkpoint. Looking at the
comment for xfs_log_item_in_current_chkpt, it seems pretty obvious to me
that the original patch to xfs_defer_finish_noroll should have done
something to lock the CIL to prevent it from switching the CIL contexts
while the predicate runs.
For upper level code that needs to know if a given log item is new
enough not to need relogging, add a new wrapper that takes the CIL
context lock long enough to sample the current CIL context. This is
kind of racy in that the CIL can switch the contexts immediately after
sampling, but that's ok because the consequence is that the defer ops
code is a little slow to relog items.
==================================================================
BUG: KASAN: use-after-free in xfs_log_item_in_current_chkpt+0x139/0x160 [xfs]
Read of size 8 at addr ffff88804ea5f608 by task fsstress/527999
CPU: 1 PID: 527999 Comm: fsstress Tainted: G D 5.16.0-rc4-xfsx #rc4
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x83/0xdf
xfs_log_item_in_current_chkpt+0x139/0x160
xfs_defer_finish_noroll+0x3bb/0x1e30
__xfs_trans_commit+0x6c8/0xcf0
xfs_reflink_remap_extent+0x66f/0x10e0
xfs_reflink_remap_blocks+0x2dd/0xa90
xfs_file_remap_range+0x27b/0xc30
vfs_dedupe_file_range_one+0x368/0x420
vfs_dedupe_file_range+0x37c/0x5d0
do_vfs_ioctl+0x308/0x1260
__x64_sys_ioctl+0xa1/0x170
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2c71a2950b
Code: 0f 1e fa 48 8b 05 85 39 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d 55 39 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe8c0e03c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00005600862a8740 RCX: 00007f2c71a2950b
RDX: 00005600862a7be0 RSI: 00000000c0189436 RDI: 0000000000000004
RBP: 000000000000000b R08: 0000000000000027 R09: 0000000000000003
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000005a
R13: 00005600862804a8 R14: 0000000000016000 R15: 00005600862a8a20
</TASK>
Allocated by task 464064:
kasan_save_stack+0x1e/0x50
__kasan_kmalloc+0x81/0xa0
kmem_alloc+0xcd/0x2c0 [xfs]
xlog_cil_ctx_alloc+0x17/0x1e0 [xfs]
xlog_cil_push_work+0x141/0x13d0 [xfs]
process_one_work+0x7f6/0x1380
worker_thread+0x59d/0x1040
kthread+0x3b0/0x490
ret_from_fork+0x1f/0x30
Freed by task 51:
kasan_save_stack+0x1e/0x50
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xed/0x130
slab_free_freelist_hook+0x7f/0x160
kfree+0xde/0x340
xlog_cil_committed+0xbfd/0xfe0 [xfs]
xlog_cil_process_committed+0x103/0x1c0 [xfs]
xlog_state_do_callback+0x45d/0xbd0 [xfs]
xlog_ioend_work+0x116/0x1c0 [xfs]
process_one_work+0x7f6/0x1380
worker_thread+0x59d/0x1040
kthread+0x3b0/0x490
ret_from_fork+0x1f/0x30
Last potentially related work creation:
kasan_save_stack+0x1e/0x50
__kasan_record_aux_stack+0xb7/0xc0
insert_work+0x48/0x2e0
__queue_work+0x4e7/0xda0
queue_work_on+0x69/0x80
xlog_cil_push_now.isra.0+0x16b/0x210 [xfs]
xlog_cil_force_seq+0x1b7/0x850 [xfs]
xfs_log_force_seq+0x1c7/0x670 [xfs]
xfs_file_fsync+0x7c1/0xa60 [xfs]
__x64_sys_fsync+0x52/0x80
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff88804ea5f600
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 8 bytes inside of
256-byte region [ffff88804ea5f600, ffff88804ea5f700)
The buggy address belongs to the page:
page:ffffea00013a9780 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804ea5ea00 pfn:0x4ea5e
head:ffffea00013a9780 order:1 compound_mapcount:0
flags: 0x4fff80000010200(slab|head|node=1|zone=1|lastcpupid=0xfff)
raw: 04fff80000010200 ffffea0001245908 ffffea00011bd388 ffff888004c42b40
raw: ffff88804ea5ea00 0000000000100009 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88804ea5f500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88804ea5f580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88804ea5f600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88804ea5f680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88804ea5f700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fixes: 4e919af7827a ("xfs: periodically relog deferred intent items")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
The "bufsize" comes from the root user. If "bufsize" is negative then,
because of type promotion, neither of the validation checks at the start
of the function are able to catch it:
if (bufsize < sizeof(struct xfs_attrlist) ||
bufsize > XFS_XATTR_LIST_MAX)
return -EINVAL;
This means "bufsize" will trigger (WARN_ON_ONCE(size > INT_MAX)) in
kvmalloc_node(). Fix this by changing the type from int to size_t.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Since kernel commit 1abcf261016e ("xfs: move on-disk inode allocation out of xfs_ialloc()"),
xfs_ialloc has been renamed to xfs_init_new_inode. So update this in comments.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
Got a report that a repeated crash test of a container host would
eventually fail with a log recovery error preventing the system from
mounting the root filesystem. It manifested as a directory leaf node
corruption on writeback like so:
XFS (loop0): Mounting V5 Filesystem
XFS (loop0): Starting recovery (logdev: internal)
XFS (loop0): Metadata corruption detected at xfs_dir3_leaf_check_int+0x99/0xf0, xfs_dir3_leaf1 block 0x12faa158
XFS (loop0): Unmount and run xfs_repair
XFS (loop0): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 3d f1 00 00 e1 9e d5 8b ........=.......
00000010: 00 00 00 00 12 fa a1 58 00 00 00 29 00 00 1b cc .......X...)....
00000020: 91 06 78 ff f7 7e 4a 7d 8d 53 86 f2 ac 47 a8 23 ..x..~J}.S...G.#
00000030: 00 00 00 00 17 e0 00 80 00 43 00 00 00 00 00 00 .........C......
00000040: 00 00 00 2e 00 00 00 08 00 00 17 2e 00 00 00 0a ................
00000050: 02 35 79 83 00 00 00 30 04 d3 b4 80 00 00 01 50 .5y....0.......P
00000060: 08 40 95 7f 00 00 02 98 08 41 fe b7 00 00 02 d4 .@.......A......
00000070: 0d 62 ef a7 00 00 01 f2 14 50 21 41 00 00 00 0c .b.......P!A....
XFS (loop0): Corruption of in-memory data (0x8) detected at xfs_do_force_shutdown+0x1a/0x20 (fs/xfs/xfs_buf.c:1514). Shutting down.
XFS (loop0): Please unmount the filesystem and rectify the problem(s)
XFS (loop0): log mount/recovery failed: error -117
XFS (loop0): log mount failed
Tracing indicated that we were recovering changes from a transaction
at LSN 0x29/0x1c16 into a buffer that had an LSN of 0x29/0x1d57.
That is, log recovery was overwriting a buffer with newer changes on
disk than was in the transaction. Tracing indicated that we were
hitting the "recovery immediately" case in
xfs_buf_log_recovery_lsn(), and hence it was ignoring the LSN in the
buffer.
The code was extracting the LSN correctly, then ignoring it because
the UUID in the buffer did not match the superblock UUID. The
problem arises because the UUID check uses the wrong UUID - it
should be checking the sb_meta_uuid, not sb_uuid. This filesystem
has sb_uuid != sb_meta_uuid (which is fine), and the buffer has the
correct matching sb_meta_uuid in it, it's just the code checked it
against the wrong superblock uuid.
The is no corruption in the filesystem, and failing to recover the
buffer due to a write verifier failure means the recovery bug did
not propagate the corruption to disk. Hence there is no corruption
before or after this bug has manifested, the impact is limited
simply to an unmountable filesystem....
This was missed back in 2015 during an audit of incorrect sb_uuid
usage that resulted in commit fcfbe2c4ef42 ("xfs: log recovery needs
to validate against sb_meta_uuid") that fixed the magic32 buffers to
validate against sb_meta_uuid instead of sb_uuid. It missed the
magicda buffers....
Fixes: ce748eaa65f2 ("xfs: create new metadata UUID field and incompat flag")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When xfs_scrub encounters a directory with a leaf1 block, it tries to
validate that the leaf1 block's bestcount (aka the best free count of
each directory data block) is the correct size. Previously, this author
believed that comparing bestcount to the directory isize (since
directory data blocks are under isize, and leaf/bestfree blocks are
above it) was sufficient.
Unfortunately during testing of online repair, it was discovered that it
is possible to create a directory with a hole between the last directory
block and isize. The directory code seems to handle this situation just
fine and xfs_repair doesn't complain, which effectively makes this quirk
part of the disk format.
Fix the check to work properly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
As part of multiple customer escalations due to file data corruption
after copy on write operations, I wrote some fstests that use fsstress
to hammer on COW to shake things loose. Regrettably, I caught some
filesystem shutdowns due to incorrect rmap operations with the following
loop:
mount <filesystem> # (0)
fsstress <run only readonly ops> & # (1)
while true; do
fsstress <run all ops>
mount -o remount,ro # (2)
fsstress <run only readonly ops>
mount -o remount,rw # (3)
done
When (2) happens, notice that (1) is still running. xfs_remount_ro will
call xfs_blockgc_stop to walk the inode cache to free all the COW
extents, but the blockgc mechanism races with (1)'s reader threads to
take IOLOCKs and loses, which means that it doesn't clean them all out.
Call such a file (A).
When (3) happens, xfs_remount_rw calls xfs_reflink_recover_cow, which
walks the ondisk refcount btree and frees any COW extent that it finds.
This function does not check the inode cache, which means that incore
COW forks of inode (A) is now inconsistent with the ondisk metadata. If
one of those former COW extents are allocated and mapped into another
file (B) and someone triggers a COW to the stale reservation in (A), A's
dirty data will be written into (B) and once that's done, those blocks
will be transferred to (A)'s data fork without bumping the refcount.
The results are catastrophic -- file (B) and the refcount btree are now
corrupt. In the first patch, we fixed the race condition in (2) so that
(A) will always flush the COW fork. In this second patch, we move the
_recover_cow call to the initial mount call in (0) for safety.
As mentioned previously, xfs_reflink_recover_cow walks the refcount
btree looking for COW staging extents, and frees them. This was
intended to be run at mount time (when we know there are no live inodes)
to clean up any leftover staging events that may have been left behind
during an unclean shutdown. As a time "optimization" for readonly
mounts, we deferred this to the ro->rw transition, not realizing that
any failure to clean all COW forks during a rw->ro transition would
result in catastrophic corruption.
Therefore, remove this optimization and only run the recovery routine
when we're guaranteed not to have any COW staging extents anywhere,
which means we always run this at mount time. While we're at it, move
the callsite to xfs_log_mount_finish because any refcount btree
expansion (however unlikely given that we're removing records from the
right side of the index) must be fed by a per-AG reservation, which
doesn't exist in its current location.
Fixes: 174edb0e46e5 ("xfs: store in-progress CoW allocations in the refcount btree")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Ian Kent reported that for inline symlinks, it's possible for
vfs_readlink to hang on to the target buffer returned by
_vn_get_link_inline long after it's been freed by xfs inode reclaim.
This is a layering violation -- we should never expose XFS internals to
the VFS.
When the symlink has a remote target, we allocate a separate buffer,
copy the internal information, and let the VFS manage the new buffer's
lifetime. Let's adapt the inline code paths to do this too. It's
less efficient, but fixes the layering violation and avoids the need to
adapt the if_data lifetime to rcu rules. Clearly I don't care about
readlink benchmarks.
As a side note, this fixes the minor locking violation where we can
access the inode data fork without taking any locks; proper locking (and
eliminating the possibility of having to switch inode_operations on a
live inode) is essential to online repair coordinating repairs
correctly.
Reported-by: Ian Kent <raven@themaw.net>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Prior to commit 40b52225e58c ("xfs: remove support for disabling quota
accounting on a mounted file system"), we used the quotaoff mutex to
protect dquot operations against quotaoff trying to pull down dquots as
part of disabling quota.
Now that we only support turning off quota enforcement, the quotaoff
mutex only protects changes in m_qflags/sb_qflags. We don't need it to
protect dquots, which means we can remove it from setqlimits and the
dquot scrub code. While we're at it, fix the function that forces
quotacheck, since it should have been taking the quotaoff mutex.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
While debugging some very strange rmap corruption reports in connection
with the online directory repair code. I root-caused the error to the
following incorrect sequence:
<start repair transaction>
<expand directory, causing a deferred rmap to be queued>
<roll transaction>
<cancel transaction>
Obviously, we should have committed the transaction instead of
cancelling it. Thinking more broadly, however, xfs_trans_cancel should
have warned us that we were throwing away work item that we already
committed to performing. This is not correct, and we need to shut down
the filesystem.
Change xfs_trans_cancel to complain in the loudest manner if we're
cancelling any transaction with deferred work items attached.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Pull xfs fix from Darrick Wong:
"This fixes a race between a readonly remount process and other
processes that hold a file IOLOCK on files that previously experienced
copy on write, that could result in severe filesystem corruption if
the filesystem is then remounted rw.
I think this is fairly rare (since the only reliable reproducer I have
that fits the second criteria is the experimental xfs_scrub program),
but the race is clear, so we still need to fix this.
Summary:
- Fix a data corruption vector that can result from the ro remount
process failing to clear all speculative preallocations from files
and the rw remount process not noticing the incomplete cleanup"
* tag 'xfs-5.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove all COW fork extents when remounting readonly
|
|
Pull io_uring fixes from Jens Axboe:
"A few fixes that are all bound for stable:
- Two syzbot reports for io-wq that turned out to be separate fixes,
but ultimately very closely related
- io_uring task_work running on cancelations"
* tag 'io_uring-5.16-2021-12-10' of git://git.kernel.dk/linux-block:
io-wq: check for wq exit after adding new worker task_work
io_uring: ensure task_work gets run as part of cancelations
io-wq: remove spurious bit clear on task_work addition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more regression fixes and stable patches, mostly one-liners.
Regression fixes:
- fix pointer/ERR_PTR mismatch returned from memdup_user
- reset dedicated zoned mode relocation block group to avoid using it
and filling it without any recourse
Fixes:
- handle a case to FITRIM range (also to make fstests/generic/260
work)
- fix warning when extent buffer state and pages get out of sync
after an IO error
- fix transaction abort when syncing due to missing mapping error set
on metadata inode after inlining a compressed file
- fix transaction abort due to tree-log and zoned mode interacting in
an unexpected way
- fix memory leak of additional extent data when qgroup reservation
fails
- do proper handling of slot search call when deleting root refs"
* tag 'for-5.16-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: replace the BUG_ON in btrfs_del_root_ref with proper error handling
btrfs: zoned: clear data relocation bg on zone finish
btrfs: free exchange changeset on failures
btrfs: fix re-dirty process of tree-log nodes
btrfs: call mapping_set_error() on btree inode with a write error
btrfs: clear extent buffer uptodate when we fail to write it
btrfs: fail if fstrim_range->start == U64_MAX
btrfs: fix error pointer dereference in btrfs_ioctl_rm_dev_v2()
|
|
Pull cifs fixes from Steve French:
"Two cifs/smb3 fixes - one for stable, the other fixes a recently
reported NTLMSSP auth problem"
* tag '5.16-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix ntlmssp auth when there is no key exchange
cifs: Fix crash on unload of cifs_arc4.ko
|
|
Pull nfsd fixes from Bruce Fields:
"Fix a race on startup and another in the delegation code.
The latter has been around for years, but I suspect recent changes may
have widened the race window a little, so I'd like to go ahead and get
it in"
* tag 'nfsd-5.16-2' of git://linux-nfs.org/~bfields/linux:
nfsd: fix use-after-free due to delegation race
nfsd: Fix nsfd startup race (again)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Tracing, ftrace and tracefs fixes:
- Have tracefs honor the gid mount option
- Have new files in tracefs inherit the parent ownership
- Have direct_ops unregister when it has no more functions
- Properly clean up the ops when unregistering multi direct ops
- Add a sample module to test the multiple direct ops
- Fix memory leak in error path of __create_synth_event()"
* tag 'trace-v5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix possible memory leak in __create_synth_event() error path
ftrace/samples: Add module to test multi direct modify interface
ftrace: Add cleanup to unregister_ftrace_direct_multi
ftrace: Use direct_ops hash in unregister_ftrace_direct
tracefs: Set all files to the same group ownership as the mount option
tracefs: Have new files inherit the ownership of their parent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull aio poll fixes from Eric Biggers:
"Fix three bugs in aio poll, and one issue with POLLFREE more broadly:
- aio poll didn't handle POLLFREE, causing a use-after-free.
- aio poll could block while the file is ready.
- aio poll called eventfd_signal() when it isn't allowed.
- POLLFREE didn't handle multiple exclusive waiters correctly.
This has been tested with the libaio test suite, as well as with test
programs I wrote that reproduce the first two bugs. I am sending this
pull request myself as no one seems to be maintaining this code"
* tag 'aio-poll-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
aio: Fix incorrect usage of eventfd_signal_allowed()
aio: fix use-after-free due to missing POLLFREE handling
aio: keep poll requests on waitqueue until completed
signalfd: use wake_up_pollfree()
binder: use wake_up_pollfree()
wait: add wake_up_pollfree()
|
|
We check IO_WQ_BIT_EXIT before attempting to create a new worker, and
wq exit cancels pending work if we have any. But it's possible to have
a race between the two, where creation checks exit finding it not set,
but we're in the process of exiting. The exit side will cancel pending
creation task_work, but there's a gap where we add task_work after we've
canceled existing creations at exit time.
Fix this by checking the EXIT bit post adding the creation task_work.
If it's set, run the same cancelation that exit does.
Reported-and-tested-by: syzbot+b60c982cb0efc5e05a47@syzkaller.appspotmail.com
Reviewed-by: Hao Xu <haoxu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we successfully cancel a work item but that work item needs to be
processed through task_work, then we can be sleeping uninterruptibly
in io_uring_cancel_generic() and never process it. Hence we don't
make forward progress and we end up with an uninterruptible sleep
warning.
While in there, correct a comment that should be IFF, not IIF.
Reported-and-tested-by: syzbot+21e6887c0be14181206d@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A delegation break could arrive as soon as we've called vfs_setlease. A
delegation break runs a callback which immediately (in
nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we
then exit nfs4_set_delegation without hashing the delegation, it will be
freed as soon as the callback is done with it, without ever being
removed from del_recall_lru.
Symptoms show up later as use-after-free or list corruption warnings,
usually in the laundromat thread.
I suspect aba2072f4523 "nfsd: grant read delegations to clients holding
writes" made this bug easier to hit, but I looked as far back as v3.0
and it looks to me it already had the same problem. So I'm not sure
where the bug was introduced; it may have been there from the beginning.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Commit bd5ae9288d64 ("nfsd: register pernet ops last, unregister first")
has re-opened rpc_pipefs_event() race against nfsd_net_id registration
(register_pernet_subsys()) which has been fixed by commit bb7ffbf29e76
("nfsd: fix nsfd startup race triggering BUG_ON").
Restore the order of register_pernet_subsys() vs register_cld_notifier().
Add WARN_ON() to prevent a future regression.
Crash info:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000012
CPU: 8 PID: 345 Comm: mount Not tainted 5.4.144-... #1
pc : rpc_pipefs_event+0x54/0x120 [nfsd]
lr : rpc_pipefs_event+0x48/0x120 [nfsd]
Call trace:
rpc_pipefs_event+0x54/0x120 [nfsd]
blocking_notifier_call_chain
rpc_fill_super
get_tree_keyed
rpc_fs_get_tree
vfs_get_tree
do_mount
ksys_mount
__arm64_sys_mount
el0_svc_handler
el0_svc
Fixes: bd5ae9288d64 ("nfsd: register pernet ops last, unregister first")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
We should defer eventfd_signal() to the workqueue when
eventfd_signal_allowed() return false rather than return
true.
Fixes: b542e383d8c0 ("eventfd: Make signal recursion protection a task bit")
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20210913111928.98-1-xieyongji@bytedance.com
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
signalfd_poll() and binder_poll() are special in that they use a
waitqueue whose lifetime is the current task, rather than the struct
file as is normally the case. This is okay for blocking polls, since a
blocking poll occurs within one task; however, non-blocking polls
require another solution. This solution is for the queue to be cleared
before it is freed, by sending a POLLFREE notification to all waiters.
Unfortunately, only eventpoll handles POLLFREE. A second type of
non-blocking poll, aio poll, was added in kernel v4.18, and it doesn't
handle POLLFREE. This allows a use-after-free to occur if a signalfd or
binder fd is polled with aio poll, and the waitqueue gets freed.
Fix this by making aio poll handle POLLFREE.
A patch by Ramji Jiyani <ramjiyani@google.com>
(https://lore.kernel.org/r/20211027011834.2497484-1-ramjiyani@google.com)
tried to do this by making aio_poll_wake() always complete the request
inline if POLLFREE is seen. However, that solution had two bugs.
First, it introduced a deadlock, as it unconditionally locked the aio
context while holding the waitqueue lock, which inverts the normal
locking order. Second, it didn't consider that POLLFREE notifications
are missed while the request has been temporarily de-queued.
The second problem was solved by my previous patch. This patch then
properly fixes the use-after-free by handling POLLFREE in a
deadlock-free way. It does this by taking advantage of the fact that
freeing of the waitqueue is RCU-delayed, similar to what eventpoll does.
Fixes: 2c14fa838cbe ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://lore.kernel.org/r/20211209010455.42744-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Currently, aio_poll_wake() will always remove the poll request from the
waitqueue. Then, if aio_poll_complete_work() sees that none of the
polled events are ready and the request isn't cancelled, it re-adds the
request to the waitqueue. (This can easily happen when polling a file
that doesn't pass an event mask when waking up its waitqueue.)
This is fundamentally broken for two reasons:
1. If a wakeup occurs between vfs_poll() and the request being
re-added to the waitqueue, it will be missed because the request
wasn't on the waitqueue at the time. Therefore, IOCB_CMD_POLL
might never complete even if the polled file is ready.
2. When the request isn't on the waitqueue, there is no way to be
notified that the waitqueue is being freed (which happens when its
lifetime is shorter than the struct file's). This is supposed to
happen via the waitqueue entries being woken up with POLLFREE.
Therefore, leave the requests on the waitqueue until they are actually
completed (or cancelled). To keep track of when aio_poll_complete_work
needs to be scheduled, use new fields in struct poll_iocb. Remove the
'done' field which is now redundant.
Note that this is consistent with how sys_poll() and eventpoll work;
their wakeup functions do *not* remove the waitqueue entries.
Fixes: 2c14fa838cbe ("aio: implement IOCB_CMD_POLL")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://lore.kernel.org/r/20211209010455.42744-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
wake_up_poll() uses nr_exclusive=1, so it's not guaranteed to wake up
all exclusive waiters. Yet, POLLFREE *must* wake up all waiters. epoll
and aio poll are fortunately not affected by this, but it's very
fragile. Thus, the new function wake_up_pollfree() has been introduced.
Convert signalfd to use wake_up_pollfree().
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: d80e731ecab4 ("epoll: introduce POLLFREE to flush ->signalfd_wqh before kfree()")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20211209010455.42744-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Warn on the lack of key exchange during NTLMSSP authentication rather
than aborting it as there are some servers that do not set it in
CHALLENGE message.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
I hit the BUG_ON() with generic/475 test case, and to my surprise, all
callers of btrfs_del_root_ref() are already aborting transaction, thus
there is not need for such BUG_ON(), just go to @out label and caller
will properly handle the error.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When finishing a zone that is used by a dedicated data relocation
block group, also remove its reference from fs_info, so we're not trying
to use a full block group for allocations during data relocation, which
will always fail.
The result is we're not making any forward progress and end up in a
deadlock situation.
Fixes: c2707a255623 ("btrfs: zoned: add a dedicated data relocation block group")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fstests runs on my VMs have show several kmemleak reports like the following.
unreferenced object 0xffff88811ae59080 (size 64):
comm "xfs_io", pid 12124, jiffies 4294987392 (age 6.368s)
hex dump (first 32 bytes):
00 c0 1c 00 00 00 00 00 ff cf 1c 00 00 00 00 00 ................
90 97 e5 1a 81 88 ff ff 90 97 e5 1a 81 88 ff ff ................
backtrace:
[<00000000ac0176d2>] ulist_add_merge+0x60/0x150 [btrfs]
[<0000000076e9f312>] set_state_bits+0x86/0xc0 [btrfs]
[<0000000014fe73d6>] set_extent_bit+0x270/0x690 [btrfs]
[<000000004f675208>] set_record_extent_bits+0x19/0x20 [btrfs]
[<00000000b96137b1>] qgroup_reserve_data+0x274/0x310 [btrfs]
[<0000000057e9dcbb>] btrfs_check_data_free_space+0x5c/0xa0 [btrfs]
[<0000000019c4511d>] btrfs_delalloc_reserve_space+0x1b/0xa0 [btrfs]
[<000000006d37e007>] btrfs_dio_iomap_begin+0x415/0x970 [btrfs]
[<00000000fb8a74b8>] iomap_iter+0x161/0x1e0
[<0000000071dff6ff>] __iomap_dio_rw+0x1df/0x700
[<000000002567ba53>] iomap_dio_rw+0x5/0x20
[<0000000072e555f8>] btrfs_file_write_iter+0x290/0x530 [btrfs]
[<000000005eb3d845>] new_sync_write+0x106/0x180
[<000000003fb505bf>] vfs_write+0x24d/0x2f0
[<000000009bb57d37>] __x64_sys_pwrite64+0x69/0xa0
[<000000003eba3fdf>] do_syscall_64+0x43/0x90
In case brtfs_qgroup_reserve_data() or btrfs_delalloc_reserve_metadata()
fail the allocated extent_changeset will not be freed.
So in btrfs_check_data_free_space() and btrfs_delalloc_reserve_space()
free the allocated extent_changeset to get rid of the allocated memory.
The issue currently only happens in the direct IO write path, but only
after 65b3c08606e5 ("btrfs: fix ENOSPC failure when attempting direct IO
write into NOCOW range"), and also at defrag_one_locked_target(). Every
other place is always calling extent_changeset_free() even if its call
to btrfs_delalloc_reserve_space() or btrfs_check_data_free_space() has
failed.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a report of a transaction abort of -EAGAIN with the following
script.
#!/bin/sh
for d in sda sdb; do
mkfs.btrfs -d single -m single -f /dev/\${d}
done
mount /dev/sda /mnt/test
mount /dev/sdb /mnt/scratch
for dir in test scratch; do
echo 3 >/proc/sys/vm/drop_caches
fio --directory=/mnt/\${dir} --name=fio.\${dir} --rw=read --size=50G --bs=64m \
--numjobs=$(nproc) --time_based --ramp_time=5 --runtime=480 \
--group_reporting |& tee /dev/shm/fio.\${dir}
echo 3 >/proc/sys/vm/drop_caches
done
for d in sda sdb; do
umount /dev/\${d}
done
The stack trace is shown in below.
[3310.967991] BTRFS: error (device sda) in btrfs_commit_transaction:2341: errno=-11 unknown (Error while writing out transaction)
[3310.968060] BTRFS info (device sda): forced readonly
[3310.968064] BTRFS warning (device sda): Skipping commit of aborted transaction.
[3310.968065] ------------[ cut here ]------------
[3310.968066] BTRFS: Transaction aborted (error -11)
[3310.968074] WARNING: CPU: 14 PID: 1684 at fs/btrfs/transaction.c:1946 btrfs_commit_transaction.cold+0x209/0x2c8
[3310.968131] CPU: 14 PID: 1684 Comm: fio Not tainted 5.14.10-300.fc35.x86_64 #1
[3310.968135] Hardware name: DIAWAY Tartu/Tartu, BIOS V2.01.B10 04/08/2021
[3310.968137] RIP: 0010:btrfs_commit_transaction.cold+0x209/0x2c8
[3310.968144] RSP: 0018:ffffb284ce393e10 EFLAGS: 00010282
[3310.968147] RAX: 0000000000000026 RBX: ffff973f147b0f60 RCX: 0000000000000027
[3310.968149] RDX: ffff974ecf098a08 RSI: 0000000000000001 RDI: ffff974ecf098a00
[3310.968150] RBP: ffff973f147b0f08 R08: 0000000000000000 R09: ffffb284ce393c48
[3310.968151] R10: ffffb284ce393c40 R11: ffffffff84f47468 R12: ffff973f101bfc00
[3310.968153] R13: ffff971f20cf2000 R14: 00000000fffffff5 R15: ffff973f147b0e58
[3310.968154] FS: 00007efe65468740(0000) GS:ffff974ecf080000(0000) knlGS:0000000000000000
[3310.968157] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[3310.968158] CR2: 000055691bcbe260 CR3: 000000105cfa4001 CR4: 0000000000770ee0
[3310.968160] PKRU: 55555554
[3310.968161] Call Trace:
[3310.968167] ? dput+0xd4/0x300
[3310.968174] btrfs_sync_file+0x3f1/0x490
[3310.968180] __x64_sys_fsync+0x33/0x60
[3310.968185] do_syscall_64+0x3b/0x90
[3310.968190] entry_SYSCALL_64_after_hwframe+0x44/0xae
[3310.968194] RIP: 0033:0x7efe6557329b
[3310.968200] RSP: 002b:00007ffe0236ebc0 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[3310.968203] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007efe6557329b
[3310.968204] RDX: 0000000000000000 RSI: 00007efe58d77010 RDI: 0000000000000006
[3310.968205] RBP: 0000000004000000 R08: 0000000000000000 R09: 00007efe58d77010
[3310.968207] R10: 0000000016cacc0c R11: 0000000000000293 R12: 00007efe5ce95980
[3310.968208] R13: 0000000000000000 R14: 00007efe6447c790 R15: 0000000c80000000
[3310.968212] ---[ end trace 1a346f4d3c0d96ba ]---
[3310.968214] BTRFS: error (device sda) in cleanup_transaction:1946: errno=-11 unknown
The abort occurs because of a write hole while writing out freeing tree
nodes of a tree-log tree. For zoned btrfs, we re-dirty a freed tree
node to ensure btrfs can write the region and does not leave a hole on
write on a zoned device. The current code fails to re-dirty a node
when the tree-log tree's depth is greater or equal to 2. That leads to
a transaction abort with -EAGAIN.
Fix the issue by properly re-dirtying a node on walking up the tree.
Fixes: d3575156f662 ("btrfs: zoned: redirty released extent buffers")
CC: stable@vger.kernel.org # 5.12+
Link: https://github.com/kdave/btrfs-progs/issues/415
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
generic/484 fails sometimes with compression on because the write ends
up small enough that it goes into the btree. This means that we never
call mapping_set_error() on the inode itself, because the page gets
marked as fine when we inline it into the metadata. When the metadata
writeback happens we see it and abort the transaction properly and mark
the fs as readonly, however we don't do the mapping_set_error() on
anything. In syncfs() we will simply return 0 if the sb is marked
read-only, so we can't check for this in our syncfs callback. The only
way the error gets returned if we called mapping_set_error() on
something. Fix this by calling mapping_set_error() on the btree inode
mapping. This allows us to properly return an error on syncfs and pass
generic/484 with compression on.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
I got dmesg errors on generic/281 on our overnight fstests. Looking at
the history this happens occasionally, with errors like this
WARNING: CPU: 0 PID: 673217 at fs/btrfs/extent_io.c:6848 assert_eb_page_uptodate+0x3f/0x50
CPU: 0 PID: 673217 Comm: kworker/u4:13 Tainted: G W 5.16.0-rc2+ #469
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Workqueue: btrfs-cache btrfs_work_helper
RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
RSP: 0018:ffffae598230bc60 EFLAGS: 00010246
RAX: 0017ffffc0002112 RBX: ffffebaec4100900 RCX: 0000000000001000
RDX: ffffebaec45733c7 RSI: ffffebaec4100900 RDI: ffff9fd98919f340
RBP: 0000000000000d56 R08: ffff9fd98e300000 R09: 0000000000000000
R10: 0001207370a91c50 R11: 0000000000000000 R12: 00000000000007b0
R13: ffff9fd98919f340 R14: 0000000001500000 R15: 0000000001cb0000
FS: 0000000000000000(0000) GS:ffff9fd9fbc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f549fcf8940 CR3: 0000000114908004 CR4: 0000000000370ef0
Call Trace:
extent_buffer_test_bit+0x3f/0x70
free_space_test_bit+0xa6/0xc0
load_free_space_tree+0x1d6/0x430
caching_thread+0x454/0x630
? rcu_read_lock_sched_held+0x12/0x60
? rcu_read_lock_sched_held+0x12/0x60
? rcu_read_lock_sched_held+0x12/0x60
? lock_release+0x1f0/0x2d0
btrfs_work_helper+0xf2/0x3e0
? lock_release+0x1f0/0x2d0
? finish_task_switch.isra.0+0xf9/0x3a0
process_one_work+0x270/0x5a0
worker_thread+0x55/0x3c0
? process_one_work+0x5a0/0x5a0
kthread+0x174/0x1a0
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
This happens because we're trying to read from a extent buffer page that
is !PageUptodate. This happens because we will clear the page uptodate
when we have an IO error, but we don't clear the extent buffer uptodate.
If we do a read later and find this extent buffer we'll think its valid
and not return an error, and then trip over this warning.
Fix this by also clearing uptodate on the extent buffer when this
happens, so that we get an error when we do a btrfs_search_slot() and
find this block later.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We've always been failing generic/260 because it's testing things we
actually don't care about and thus won't fail for. However we probably
should fail for fstrim_range->start == U64_MAX since we clearly can't
trim anything past that. This in combination with an update to
generic/260 will allow us to pass this test properly.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If memdup_user() fails the error handing will crash when it tries
to kfree() an error pointer. Just return directly because there is
no cleanup required.
Fixes: 1a15eb724aae ("btrfs: use btrfs_get_dev_args_from_path in dev removal ioctls")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As people have been asking to allow non-root processes to have access to
the tracefs directory, it was considered best to only allow groups to have
access to the directory, where it is easier to just set the tracefs file
system to a specific group (as other would be too dangerous), and that way
the admins could pick which processes would have access to tracefs.
Unfortunately, this broke tooling on Android that expected the other bit
to be set. For some special cases, for non-root tools to trace the system,
tracefs would be mounted and change the permissions of the top level
directory which gave access to all running tasks permission to the
tracing directory. Even though this would be dangerous to do in a
production environment, for testing environments this can be useful.
Now with the new changes to not allow other (which is still the proper
thing to do), it breaks the testing tooling. Now more code needs to be
loaded on the system to change ownership of the tracing directory.
The real solution is to have tracefs honor the gid=xxx option when
mounting. That is,
(tracing group tracing has value 1003)
mount -t tracefs -o gid=1003 tracefs /sys/kernel/tracing
should have it that all files in the tracing directory should be of the
given group.
Copy the logic from d_walk() from dcache.c and simplify it for the mount
case of tracefs if gid is set. All the files in tracefs will be walked and
their group will be set to the value passed in.
Link: https://lkml.kernel.org/r/20211207171729.2a54e1b3@gandalf.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Yabin Cui <yabinc@google.com>
Fixes: 49d67e445742 ("tracefs: Have tracefs directories not set OTH permission bits by default")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
If directories in tracefs have their ownership changed, then any new files
and directories that are created under those directories should inherit
the ownership of the director they are created in.
Link: https://lkml.kernel.org/r/20211208075720.4855d180@gandalf.local.home
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yabin Cui <yabinc@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: stable@vger.kernel.org
Fixes: 4282d60689d4f ("tracefs: Add new tracefs file system")
Reported-by: Kalesh Singh <kaleshsingh@google.com>
Reported: https://lore.kernel.org/all/CAC_TJve8MMAv+H_NdLSJXZUSoxOEq2zB_pVaJ9p=7H6Bu3X76g@mail.gmail.com/
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The exit function is wrongly placed in the __init section and this leads
to a crash when the module is unloaded. Just remove both the init and
exit functions since this module does not need them.
Fixes: 71c02863246167b3d ("cifs: fork arc4 and create a separate module...")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
As part of multiple customer escalations due to file data corruption
after copy on write operations, I wrote some fstests that use fsstress
to hammer on COW to shake things loose. Regrettably, I caught some
filesystem shutdowns due to incorrect rmap operations with the following
loop:
mount <filesystem> # (0)
fsstress <run only readonly ops> & # (1)
while true; do
fsstress <run all ops>
mount -o remount,ro # (2)
fsstress <run only readonly ops>
mount -o remount,rw # (3)
done
When (2) happens, notice that (1) is still running. xfs_remount_ro will
call xfs_blockgc_stop to walk the inode cache to free all the COW
extents, but the blockgc mechanism races with (1)'s reader threads to
take IOLOCKs and loses, which means that it doesn't clean them all out.
Call such a file (A).
When (3) happens, xfs_remount_rw calls xfs_reflink_recover_cow, which
walks the ondisk refcount btree and frees any COW extent that it finds.
This function does not check the inode cache, which means that incore
COW forks of inode (A) is now inconsistent with the ondisk metadata. If
one of those former COW extents are allocated and mapped into another
file (B) and someone triggers a COW to the stale reservation in (A), A's
dirty data will be written into (B) and once that's done, those blocks
will be transferred to (A)'s data fork without bumping the refcount.
The results are catastrophic -- file (B) and the refcount btree are now
corrupt. Solve this race by forcing the xfs_blockgc_free_space to run
synchronously, which causes xfs_icwalk to return to inodes that were
skipped because the blockgc code couldn't take the IOLOCK. This is safe
to do here because the VFS has already prohibited new writer threads.
Fixes: 10ddf64e420f ("xfs: remove leftover CoW reservations when remounting ro")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
|
|
The order of these two parameters is just reversed. gcc didn't warn on
that, probably because 'void *' can be converted from or to other
pointer types without warning.
Cc: stable@vger.kernel.org
Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers")
Fixes: e1b1240c1ff5 ("netfs: Add write_begin helper")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Link: https://lore.kernel.org/r/20211207031449.100510-1-jefflexu@linux.alibaba.com/ # v1
|
|
Taking sb_writers whilst holding mmap_lock isn't allowed and will result in
a lockdep warning like that below. The problem comes from cachefiles
needing to take the sb_writers lock in order to do a write to the cache,
but being asked to do this by netfslib called from readpage, readahead or
write_begin[1].
Fix this by always offloading the write to the cache off to a worker
thread. The main thread doesn't need to wait for it, so deadlock can be
avoided.
This can be tested by running the quick xfstests on something like afs or
ceph with lockdep enabled.
WARNING: possible circular locking dependency detected
5.15.0-rc1-build2+ #292 Not tainted
------------------------------------------------------
holetest/65517 is trying to acquire lock:
ffff88810c81d730 (mapping.invalidate_lock#3){.+.+}-{3:3}, at: filemap_fault+0x276/0x7a5
but task is already holding lock:
ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&mm->mmap_lock#2){++++}-{3:3}:
validate_chain+0x3c4/0x4a8
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
__might_fault+0x87/0xb1
strncpy_from_user+0x25/0x18c
removexattr+0x7c/0xe5
__do_sys_fremovexattr+0x73/0x96
do_syscall_64+0x67/0x7a
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #1 (sb_writers#10){.+.+}-{0:0}:
validate_chain+0x3c4/0x4a8
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
cachefiles_write+0x2b3/0x4bb
netfs_rreq_do_write_to_cache+0x3b5/0x432
netfs_readpage+0x2de/0x39d
filemap_read_page+0x51/0x94
filemap_get_pages+0x26f/0x413
filemap_read+0x182/0x427
new_sync_read+0xf0/0x161
vfs_read+0x118/0x16e
ksys_read+0xb8/0x12e
do_syscall_64+0x67/0x7a
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (mapping.invalidate_lock#3){.+.+}-{3:3}:
check_noncircular+0xe4/0x129
check_prev_add+0x16b/0x3a4
validate_chain+0x3c4/0x4a8
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
down_read+0x40/0x4a
filemap_fault+0x276/0x7a5
__do_fault+0x96/0xbf
do_fault+0x262/0x35a
__handle_mm_fault+0x171/0x1b5
handle_mm_fault+0x12a/0x233
do_user_addr_fault+0x3d2/0x59c
exc_page_fault+0x85/0xa5
asm_exc_page_fault+0x1e/0x30
other info that might help us debug this:
Chain exists of:
mapping.invalidate_lock#3 --> sb_writers#10 --> &mm->mmap_lock#2
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_lock#2);
lock(sb_writers#10);
lock(&mm->mmap_lock#2);
lock(mapping.invalidate_lock#3);
*** DEADLOCK ***
1 lock held by holetest/65517:
#0: ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c
stack backtrace:
CPU: 0 PID: 65517 Comm: holetest Not tainted 5.15.0-rc1-build2+ #292
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
dump_stack_lvl+0x45/0x59
check_noncircular+0xe4/0x129
? print_circular_bug+0x207/0x207
? validate_chain+0x461/0x4a8
? add_chain_block+0x88/0xd9
? hlist_add_head_rcu+0x49/0x53
check_prev_add+0x16b/0x3a4
validate_chain+0x3c4/0x4a8
? check_prev_add+0x3a4/0x3a4
? mark_lock+0xa5/0x1c6
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
? filemap_fault+0x276/0x7a5
? rcu_read_unlock+0x59/0x59
? add_to_page_cache_lru+0x13c/0x13c
? lock_is_held_type+0x7b/0xd3
down_read+0x40/0x4a
? filemap_fault+0x276/0x7a5
filemap_fault+0x276/0x7a5
? pagecache_get_page+0x2dd/0x2dd
? __lock_acquire+0x8bc/0x949
? pte_offset_kernel.isra.0+0x6d/0xc3
__do_fault+0x96/0xbf
? do_fault+0x124/0x35a
do_fault+0x262/0x35a
? handle_pte_fault+0x1c1/0x20d
__handle_mm_fault+0x171/0x1b5
? handle_pte_fault+0x20d/0x20d
? __lock_release+0x151/0x254
? mark_held_locks+0x1f/0x78
? rcu_read_unlock+0x3a/0x59
handle_mm_fault+0x12a/0x233
do_user_addr_fault+0x3d2/0x59c
? pgtable_bad+0x70/0x70
? rcu_read_lock_bh_held+0xab/0xab
exc_page_fault+0x85/0xa5
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x40192f
Code: ff 48 89 c3 48 8b 05 50 28 00 00 48 85 ed 7e 23 31 d2 4b 8d 0c 2f eb 0a 0f 1f 00 48 8b 05 39 28 00 00 48 0f af c2 48 83 c2 01 <48> 89 1c 01 48 39 d5 7f e8 8b 0d f2 27 00 00 31 c0 85 c9 74 0e 8b
RSP: 002b:00007f9931867eb0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00007f9931868700 RCX: 00007f993206ac00
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00007ffc13e06ee0
RBP: 0000000000000100 R08: 0000000000000000 R09: 00007f9931868700
R10: 00007f99318689d0 R11: 0000000000000202 R12: 00007ffc13e06ee0
R13: 0000000000000c00 R14: 00007ffc13e06e00 R15: 00007f993206a000
Fixes: 726218fdc22c ("netfs: Define an interface to talk to a cache")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
cc: Jan Kara <jack@suse.cz>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210922110420.GA21576@quack2.suse.cz/ [1]
Link: https://lore.kernel.org/r/163887597541.1596626.2668163316598972956.stgit@warthog.procyon.org.uk/ # v1
|
|
There's a small race here where the task_work could finish and drop
the worker itself, so that by the time that task_work_add() returns
with a successful addition we've already put the worker.
The worker callbacks clear this bit themselves, so we don't actually
need to manually clear it in the caller. Get rid of it.
Reported-by: syzbot+b60c982cb0efc5e05a47@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull xfs fix from Darrick Wong:
"Remove an unnecessary (and backwards) rename flags check that
duplicates a VFS level check"
* tag 'xfs-5.16-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove incorrect ASSERT in xfs_rename
|
|
Pull cifs fixes from Steve French:
"Three SMB3 multichannel/fscache fixes and a DFS fix.
In testing multichannel reconnect scenarios recently various problems
with the cifs.ko implementation of fscache were found (e.g. incorrect
initialization of fscache cookies in some cases)"
* tag '5.16-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: avoid use of dstaddr as key for fscache client cookie
cifs: add server conn_id to fscache client cookie
cifs: wait for tcon resource_id before getting fscache super
cifs: fix missed refcounting of ipc tcon
|
