summaryrefslogtreecommitdiff
path: root/include/dt-bindings
AgeCommit message (Collapse)Author
2019-12-09dt-bindings: reset: meson8b: fix duplicate reset IDsMartin Blumenstingl
According to the public S805 datasheet the RESET2 register uses the following bits for the PIC_DC, PSC and NAND reset lines: - PIC_DC is at bit 3 (meaning: RESET_VD_RMEM + 3) - PSC is at bit 4 (meaning: RESET_VD_RMEM + 4) - NAND is at bit 5 (meaning: RESET_VD_RMEM + 4) Update the reset IDs of these three reset lines so they don't conflict with PIC_DC and map to the actual hardware reset lines. Fixes: 79795e20a184eb ("dt-bindings: reset: Add bindings for the Meson SoC Reset Controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-12-05Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Device-tree updates from Olof Johansson: "As always, the bulk of updates. Some of the news this cycle: New SoC descriptions: - Broadcom BCM2711 - Amlogic Meson A1 and G12 - Freescale S32V234 - Marvell Armada AP807/AP807-quad and CP115 - Realtek RTD1293 and RTD1296 - Rockchip RK3308 New boards and platforms: - Allwinner: NanoPi Duo2 - Amlogic: Ugoos am6 - Atmel at91: Overkiz Kizbox2/4 - Broadcom: RPi4, Luxul XWC-2000 - Marvell: New Espressobin flavor - NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and OPOS6ULDev - Renesas: Salvator-XS - Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (653 commits) ARM: dts: logicpd-torpedo: Disable USB Host arm: dts: mt6323: add keys, power-controller, rtc and codec arm64: dts: mt8183: add systimer0 device node dt-bindings: mediatek: update bindings for MT8183 systimer arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board. arm64: dts: rockchip: Add Beelink A1 dt-bindings: ARM: rockchip: Add Beelink A1 arm64: dts: rockchip: Add RK3328 audio pipelines arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports arm64: dts: ti: k3-j721e-main: add USB controller nodes ARM: dts: aspeed-g6: Add timer description ARM: dts: aspeed: ast2600evb: Enable i2c buses ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards dt-bindings: arm: at91: Document Kizbox2-2 board binding arm64: dts: meson-gx: fix i2c compatible arm64: dts: meson-gx: cec node should be disabled by default arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible arm64: dts: meson-gxm: fix gpu irq order arm64: dts: meson-g12a: fix gpu irq order ...
2019-12-05Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Olof Johansson: "Various driver updates for platforms: - A larger set of work on Tegra 2/3 around memory controller and regulator features, some fuse cleanups, etc.. - MMP platform drivers, in particular for USB PHY, and other smaller additions. - Samsung Exynos 5422 driver for DMC (dynamic memory configuration), and ASV (adaptive voltage), allowing the platform to run at more optimal operating points. - Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas - Clock/reset control driver for TI/OMAP - Meson-A1 reset controller support - Qualcomm sdm845 and sda845 SoC IDs for socinfo" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits) firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT soc: fsl: add RCPM driver dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition memory: tegra: Consolidate registers definition into common header memory: tegra: Ensure timing control debug features are disabled memory: tegra: Introduce Tegra30 EMC driver memory: tegra: Do not handle error from wait_for_completion_timeout() memory: tegra: Increase handshake timeout on Tegra20 memory: tegra: Print a brief info message about EMC timings memory: tegra: Pre-configure debug register on Tegra20 memory: tegra: Include io.h instead of iopoll.h memory: tegra: Adapt for Tegra20 clock driver changes memory: tegra: Don't set EMC rate to maximum on probe for Tegra20 memory: tegra: Add gr2d and gr3d to DRM IOMMU group memory: tegra: Set DMA mask based on supported address bits soc: at91: Add Atmel SFR SN (Serial Number) support memory: atmel-ebi: switch to SPDX license identifiers memory: atmel-ebi: move NUM_CS definition inside EBI driver soc: mediatek: Refactor bus protection control soc: mediatek: Refactor sram control ...
2019-12-02Merge tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine updates from Vinod Koul: "Here are the changes this time around, couple of new drivers and updates to few more: - New drivers for SiFive PDMA, Socionext Milbeaut HDMAC and XDMAC, Freescale dpaa2 qDMA - Support for X1000 in JZ4780 - Xilinx dma updates and support for Xilinx AXI MCDM controller - New bindings for rcar R8A774B1 - Minor updates to dw, dma-jz4780, ti-edma, sprd drivers" * tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (61 commits) dmaengine: Fix Kconfig indentation dmaengine: sf-pdma: move macro to header file dmaengine: sf-pdma: replace /** with /* for non-function comment dmaengine: ti: edma: fix missed failure handling dmaengine: mmp_pdma: add missed of_dma_controller_free dmaengine: mmp_tdma: add missed of_dma_controller_free dmaengine: sprd: Add wrap address support for link-list mode MAINTAINERS: Add Green as SiFive PDMA driver maintainer dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00 dt-bindings: dmaengine: sf-pdma: add bindins for SiFive PDMA dmaengine: zx: remove: removed dmam_pool_destroy dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq fails dmaengine: iop-adma: clean up an indentation issue dmaengine: milbeaut-xdmac: remove redundant error log dmaengine: milbeaut-hdmac: remove redundant error log dmaengine: dma-jz4780: add missed clk_disable_unprepare in remove dmaengine: JZ4780: Add support for the X1000. dt-bindings: dmaengine: Add X1000 bindings. dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handle ...
2019-12-01Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This merge window we have one small clk provider API in the core framework and then a bunch of driver updates and a handful of new drivers. In terms of diffstat the Qualcomm and Amlogic drivers are high up there because of all the clk data introcued by new drivers. The Nvidia Tegra driver had a lot of work done this cycle too to support suspend/resume and memory controllers. And the OMAP clk driver got proper clk and reset handling in place. Rounding out the patches are various updates to remove unused data, mark things static, correct incorrect data in drivers, etc. All the little things that improve drivers and maintain code health. I will point out that there's a patch in here for the GPIO clk driver, that almost nobody uses, which changes behavior and causes clk_set_rate() to try to change the GPIO gate clk's parent. Other than that things are fairly well SoC specific here. Core: - Add a clk provider API to get current parent index - Plug a memory leak in clk_unregister() path New Drivers: - CGU in Ingenix X1000 - Bitmain BM1880 clks - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Add support for the Renesas R-Car M3-W+ (r8a77961) SoC - Add support for the Renesas RZ/G2N (r8a774b1) SoC - Add Tegra20/30 External Memory Clock (EMC) support Updates: - Make gpio gate clks propagate rate setting up to parent - Prepare Armada 3700 for suspend to RAM by moving PCIe suspend/resume priority - Drop unused variables, enums, etc. in various clk drivers - Convert various drivers to use devm_platform_ioremap_resource() - Use struct_size() some more in various clk drivers - Improve Rockchip px30 clk tree - Add suspend/resume support to Tegra210 clk driver - Reimplement SOR clks on earlier Tegra SoCs, helping HDMI and DP - Allwinner DT exports and H6 clk tree fixes - Proper clk and reset handling for OMAP SoCs - Revamped TI divider clk to clamp max divider - Make 1443X/1416X PLL clock structure common for reusing among i.MX8 SoCs - Drop IMX7ULP_CLK_MIPI_PLL clock, it shouldn't be used - Add VIDEO2_PLL clock for imx8mq - Add missing gate clock for pll1/2 fixed dividers on i.MX8 SoCs - Add sm1 support in the Amlogic audio clock controller - Switch some clocks on R-Car Gen2/3 to .determine_rate() - Remove Renesas R-Car Gen2 legacy DT clock support - Improve arithmetic divisions on Renesas R-Car Gen2 and Gen3 - Improve Renesas R-Car Gen3 SD clock handling - Add rate table for Samsung exynos542x GPU and VPLL clks - Fix potential CPU performance degradation after system suspend/resume cycle on exynos542x SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (160 commits) clk: aspeed: Add RMII RCLK gates for both AST2500 MACs MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers clk: ingenic: Allow drivers to be built with COMPILE_TEST MAINTAINERS: Update section for Ux500 clock drivers clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. clk: tegra: Use match_string() helper to simplify the code clk: pxa: fix one of the pxa RTC clocks clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() clk: armada-xp: remove unused code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 ...
2019-11-27Merge tag 'staging-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / iio updates from Greg KH: "Here is the big staging and iio set of patches for the 5.5-rc1 release. It's the usual huge collection of cleanup patches all over the drivers/staging/ area, along with a new staging driver, and a bunch of new IIO drivers as well. Full details are in the shortlog, but all of these have been in linux-next for a long time with no reported issues" * tag 'staging-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (548 commits) staging: vchiq: Have vchiq_dump_* functions return an error code staging: vchiq: Refactor indentation in vchiq_dump_* functions staging: fwserial: Fix Kconfig indentation (seven spaces) staging: vchiq_dump: Replace min with min_t staging: vchiq: Fix block comment format in vchiq_dump() staging: octeon: indent with tabs instead of spaces staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error staging: most: core: remove sysfs attr remove_link staging: vc04: Fix Kconfig indentation staging: pi433: Fix Kconfig indentation staging: nvec: Fix Kconfig indentation staging: most: Fix Kconfig indentation staging: fwserial: Fix Kconfig indentation staging: fbtft: Fix Kconfig indentation fbtft: Drop OF dependency fbtft: Make use of device property API fbtft: Drop useless #ifdef CONFIG_OF and dead code fbtft: Describe function parameters in kernel-doc fbtft: Make sure string is NULL terminated staging: rtl8723bs: remove set but not used variable 'change', 'pos' ...
2019-11-27Merge tag 'char-misc-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc and other driver patches for 5.5-rc1 Loads of different things in here, this feels like the catch-all of driver subsystems these days. Full details are in the shortlog, but nothing major overall, just lots of driver updates and additions. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (198 commits) char: Fix Kconfig indentation, continued habanalabs: add more protection of device during reset habanalabs: flush EQ workers in hard reset habanalabs: make the reset code more consistent habanalabs: expose reset counters via existing INFO IOCTL habanalabs: make code more concise habanalabs: use defines for F/W files habanalabs: remove prints on successful device initialization habanalabs: remove unnecessary checks habanalabs: invalidate MMU cache only once habanalabs: skip VA block list update in reset flow habanalabs: optimize MMU unmap habanalabs: prevent read/write from/to the device during hard reset habanalabs: split MMU properties to PCI/DRAM habanalabs: re-factor MMU masks and documentation habanalabs: type specific MMU cache invalidation habanalabs: re-factor memory module code habanalabs: export uapi defines to user-space habanalabs: don't print error when queues are full habanalabs: increase max jobs number to 512 ...
2019-11-27Merge tag 'pinctrl-v5.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for v5.5. It is pretty much business as usual, the most interesting thing I think is the pin controller for a new Intel chip called Lightning Mountain, which is according to news reports some kind of embedded network processor and what is surprising about it is that Intel have decided to use device tree to describe the system rather than ACPI that they have traditionally favored. Core changes: - Avoid taking direct references to device tree-supplied device names: these may changed at runtime under certain circumstances to kstrdup them. GPIO related: - Work is ongoing to move to passing the irqchip along as a templated struct gpio_irq_chip when adding a standard gpiolib-based irqchip to a GPIO controller, a few patches in this cycle switches a few pin control drivers over to using this method. New hardware support: - Intel Lightning Mountain SoC pin controller and GPIO support, a first Intel platform to use device tree rather than ACPI to configure the system. News reports says that this SoC is a network processor. - Qualcomm MSM8976 and MSM8956 - Qualcomm PMIC GPIO now also supports PM6150 and PM6150L - Qualcomm SPMI MPP and SPMI GPIO for PM8950 and PMI8950 - Rockchip RK3308 - Renesas R8A77961 - Allwinner Meson-A1 Driver improvements: - get_multiple and set_multiple support for the AT91-PIO4 driver. - Convert Qualcomm SSBI GPIO to use the hierarchical IRQ helpers in the GPIOlib irqchip" * tag 'pinctrl-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits) pinctrl: ingenic: Add OTG VBUS pin for the JZ4770 pinctrl: ingenic: Handle PIN_CONFIG_OUTPUT config pinctrl: Fix Kconfig indentation pinctrl: lewisburg: Update pin list according to v1.1v6 MAINTAINERS: Replace my email by one @kernel.org pinctrl: armada-37xx: Fix irq mask access in armada_37xx_irq_set_type() dt-bindings: pinctrl: intel: Add for new SoC pinctrl: Add pinmux & GPIO controller driver for a new SoC pinctrl: rza1: remove unnecessary static inline function pinctrl: meson: add pinctrl driver support for Meson-A1 SoC pinctrl: meson: add a new callback for SoCs fixup pinctrl: nomadik: db8500: Add mc0_a_2 pin group without direction control dt-bindings: pinctrl: Convert generic pin mux and config properties to schema pinctrl: cherryview: Missed type change to unsigned int pinctrl: intel: Missed type change to unsigned int pinctrl: use devm_platform_ioremap_resource() to simplify code pinctrl: just return if no valid maps dt-bindings: pinctrl: qcom-pmic-mpp: Add support for PM/PMI8950 pinctrl: qcom: spmi-mpp: Add PM/PMI8950 compatible strings dt-bindings: pinctrl: qcom-pmic-gpio: Add support for PM/PMI8950 ...
2019-11-27Merge branches 'clk-ingenic', 'clk-init-leak', 'clk-ux500' and 'clk-bitmain' ↵Stephen Boyd
into clk-next - Support CGU in Ingenix X1000 - Support Bitmain BM1880 clks * clk-ingenic: clk: ingenic: Allow drivers to be built with COMPILE_TEST clk: Ingenic: Add CGU driver for X1000. dt-bindings: clock: Add X1000 bindings. * clk-init-leak: clk: mark clk_disable_unused() as __init clk: Fix memory leak in clk_unregister() * clk-ux500: MAINTAINERS: Update section for Ux500 clock drivers * clk-bitmain: MAINTAINERS: Add entry for BM1880 SoC clock driver clk: Add common clock driver for BM1880 SoC dt-bindings: clock: Add devicetree binding for BM1880 SoC clk: Add clk_hw_unregister_composite helper function definition clk: Zero init clk_init_data in helpers
2019-11-27Merge branches 'clk-gpio-flags', 'clk-tegra', 'clk-rockchip', 'clk-sprd' and ↵Stephen Boyd
'clk-pxa' into clk-next - Make gpio gate clks propagate rate setting up to parent * clk-gpio-flags: clk: clk-gpio: propagate rate change to parent * clk-tegra: (23 commits) clk: tegra: Use match_string() helper to simplify the code clk: tegra: Fix build error without CONFIG_PM_SLEEP clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP clk: tegra: Optimize PLLX restore on Tegra20/30 clk: tegra: Add suspend and resume support on Tegra210 clk: tegra: Share clk and rst register defines with Tegra clock driver clk: tegra: Use fence_udelay() during PLLU init clk: tegra: clk-dfll: Add suspend and resume support clk: tegra: clk-super: Add restore-context support clk: tegra: clk-super: Fix to enable PLLP branches to CPU clk: tegra: periph: Add restore_context support clk: tegra: Support for OSC context save and restore clk: tegra: pll: Save and restore pll context clk: tegra: pllout: Save and restore pllout context clk: tegra: divider: Save and restore divider rate clk: tegra: Reimplement SOR clocks on Tegra210 clk: tegra: Reimplement SOR clock on Tegra124 clk: tegra: Rename sor0_lvds to sor0_out clk: tegra: Move SOR0 implementation to Tegra124 clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRC ... * clk-rockchip: clk: rockchip: protect the pclk_usb_grf as critical on px30 clk: rockchip: add video-related niu clocks as critical on px30 clk: rockchip: move px30 critical clocks to correct clock controller clk: rockchip: Add div50 clocks for px30 sdmmc, emmc, sdio and nandc clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandc clk: rockchip: make clk_half_divider_ops static * clk-sprd: clk: sprd: Use IS_ERR() to validate the return value of syscon_regmap_lookup_by_phandle() * clk-pxa: clk: pxa: fix one of the pxa RTC clocks
2019-11-27Merge branches 'clk-ti', 'clk-allwinner', 'clk-qcom', 'clk-sa' and ↵Stephen Boyd
'clk-aspeed' into clk-next - Qualcomm MSM8998 GPU clk controllers - Qualcomm SC7180 GCC and RPMH clk controllers - Qualcomm QCS404 Q6SSTOP clk controllers - Use struct_size() some more in various clk drivers * clk-ti: clk/ti/adpll: allocate room for terminating null ARM: dts: omap3: fix DPLL4 M4 divider max value clk: ti: divider: convert to use min,max,mask instead of width clk: ti: divider: cleanup ti_clk_parse_divider_data API clk: ti: divider: cleanup _register_divider and ti_clk_get_div_table clk: ti: am43xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from gfx clock clk: ti: am33xx: drop idlest polling from pruss clkctrl clock clk: ti: am43xx: drop idlest polling from pruss clkctrl clock clk: ti: omap5: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap4: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: dra7xx: Drop idlest polling from IPU & DSP clkctrl clocks clk: ti: omap5: add IVA subsystem clkctrl data dt-bindings: clk: add omap5 iva clkctrl definitions clk: ti: clkctrl: add new exported API for checking standby info clk: ti: clkctrl: convert to use bit helper macros instead of bitops clk: ti: clkctrl: fix setting up clkctrl clocks * clk-allwinner: clk: sunxi-ng: h3: Export MBUS clock clk: sunxi-ng: h6: Allow GPU to change parent rate clk: sunxi-ng: h6: Use sigma-delta modulation for audio PLL * clk-qcom: clk: qcom: rpmh: Reuse sdm845 clks for sm8150 clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver clk: qcom: Allow constant ratio freq tables for rcg clk: qcom: smd: Add missing pnoc clock clk: qcom: Enumerate clocks and reset needed to boot the 8998 modem clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180 dt-bindings: clock: Introduce RPMHCC bindings for SC7180 dt-bindings: clock: Add YAML schemas for the QCOM RPMHCC clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SC7180 dt-bindings: clock: Add sc7180 GCC clock binding dt-bindings: clock: Add YAML schemas for the QCOM GCC clock bindings clk: qcom: common: Return NULL from clk_hw OF provider clk: qcom: rcg: update the DFS macro for RCG clk: qcom: remove unneeded semicolon clk: qcom: Add Q6SSTOP clock controller for QCS404 dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings * clk-sa: drivers/clk: convert VL struct to struct_size * clk-aspeed: clk: aspeed: Add RMII RCLK gates for both AST2500 MACs clk: ast2600: Add RMII RCLK gates for all four MACs dt-bindings: clock: Add AST2600 RMII RCLK gate definitions dt-bindings: clock: Add AST2500 RMII RCLK definitions
2019-11-27Merge branches 'clk-hisi', 'clk-amlogic', 'clk-samsung', 'clk-renesas' and ↵Stephen Boyd
'clk-imx' into clk-next * clk-hisi: clk: hi6220: use CLK_OF_DECLARE_DRIVER * clk-amlogic: clk: meson: axg-audio: use devm_platform_ioremap_resource() to simplify code clk: meson: axg_audio: add sm1 support clk: meson: axg-audio: provide clk top signal name clk: meson: axg-audio: prepare sm1 addition clk: meson: axg-audio: fix regmap last register clk: meson: axg-audio: remove useless defines dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate * clk-samsung: clk: samsung: exynos5420: Add SET_RATE_PARENT flag to clocks on G3D path clk: samsung: exynos5420: Preserve CPU clocks configuration during suspend/resume clk: samsung: exynos5420: Add VPLL rate table clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths * clk-renesas: (23 commits) clk: renesas: r8a7796: Add R8A77961 CPG/MSSR support clk: renesas: Rename CLK_R8A7796 to CLK_R8A77960 dt-bindings: clock: renesas: cpg-mssr: Document r8a77961 support clk: renesas: r8a77965: Remove superfluous semicolon dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example dt-bindings: clock: renesas: Remove R-Car Gen2 legacy DT bindings dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions clk: renesas: rcar-gen3: Switch SD clocks to .determine_rate() clk: renesas: rcar-gen3: Switch Z clocks to .determine_rate() clk: renesas: rcar-gen2: Switch Z clock to .determine_rate() clk: renesas: r8a774b1: Add TMU clock clk: renesas: cpg-mssr: Add r8a774b1 support dt-bindings: clock: renesas: cpg-mssr: Document r8a774b1 binding clk: renesas: rcar-gen3: Loop to find best rate in cpg_sd_clock_round_rate() clk: renesas: rcar-gen3: Absorb cpg_sd_clock_calc_div() clk: renesas: rcar-gen3: Avoid double table iteration in SD .set_rate() clk: renesas: rcar-gen3: Improve arithmetic divisions clk: renesas: rcar-gen2: Improve arithmetic divisions clk: renesas: Remove R-Car Gen2 legacy DT clock support ... * clk-imx: clk: imx: imx8mq: fix sys3_pll_out_sels clk: imx7ulp: do not export out IMX7ULP_CLK_MIPI_PLL clock clk: imx: imx6ul: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sx: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx6sll: use imx_obtain_fixed_clk_hw to simplify code clk: imx: imx7d: use imx_obtain_fixed_clk_hw to simplify code clk: imx7ulp: Correct DDR clock mux options clk: imx7ulp: Correct system clock source option #7 clk: imx: imx8mq: mark sys1/2_pll as fixed clock clk: imx: imx8mn: mark sys_pll1/2 as fixed clock clk: imx: imx8mm: mark sys_pll1/2 as fixed clock clk: imx8mn: Define gates for pll1/2 fixed dividers clk: imx8mm: Define gates for pll1/2 fixed dividers clk: imx8mq: Define gates for pll1/2 fixed dividers clk: imx: clk-pll14xx: Make two variables static clk: imx8mq: Add VIDEO2_PLL clock clk: imx8mn: Use common 1443X/1416X PLL clock structure clk: imx8mm: Move 1443X/1416X PLL clock structure to common place clk: imx: pll14xx: Fix quick switch of S/K parameter
2019-11-26Merge tag 'sound-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There have been some significant changes in the core side, both for ALSA and ASoC, while lots of development have been seen in SOF, as well as many small fixes/improvements for ASoC codecs and platforms. Below is a highlight in this cycle: Core: - The unification of PCM vmalloc buffer allocation helpers into the standard API - Clean up of the default PCM mmap handling for vmalloc & SG-buffer - Fix potential races at ALSA timer open - A few new PCM API extensions; just preliminary core changes, the actual changes in drivers will be merged in 5.6 - Continued ASoC componentization works; now almost everything is a common ASoC component object. A lot of refactoring and simplification have been done along with it. ASoC: - Many fixes to the Sound Open Firmware (SOF) code - Wake on voice support for Chromebooks - SPI support and trigger word detection for RT5677 - New drivers for Analog Devices ADAU7118, Intel Cannonlake systems with RT1011 and RT5682, Texas Instruments TAS2562 and TAS2770 HD-audio: - Improved Intel DSP configuration / probe code for SOF - Plumbing the legacy HD-audio driver with Intel SOF HDMI - DP-MST support for Nvidia HDMI codecs - Realtek quirks cleanups and new additions as usual Others: - Lots of refactoring and cleanups for FireWire; period-size sharing, h/w IRQ interval configuration, clock recovery improvements, etc - USB-audio: Scarlett mixer quirks - Cleanups of PCM calls in various drivers (including media and USB) to adapt the core API changes" * tag 'sound-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (497 commits) ALSA: usb-audio: Fix Focusrite Scarlett 6i6 gen1 - input handling ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC ALSA: aloop: Fix dependency on timer API ASoC: DMI long name - avoid to add board name if matches with product name ASoC: improve the DMI long card code in asoc-core ASoC: rsnd: fix DALIGN register for SSIU ALSA: aloop: Avoid unexpected timer event callback tasklets ALSA: aloop: Remove redundant locking in timer open function ASoC: component: Add sync_stop PCM ops ASoC: pcm: Make ioctl ops optional ALSA: hda/hdmi - Clear codec->relaxed_resume flag at unbinding ALSA: hda - Disable audio component for legacy Nvidia HDMI codecs ALSA: cs4236: fix error return comparison of an unsigned integer ALSA: usb-audio: Fix NULL dereference at parsing BADD ALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port data ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop ALSA: hda/realtek - Move some alc236 pintbls to fallback table ALSA: hda/realtek - Move some alc256 pintbls to fallback table ALSA: docs: Update about the new PCM sync_stop ops ALSA: pcm: Add card sync_irq field ...
2019-11-26Merge tag 'pm-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include cpuidle changes to use nanoseconds (instead of microseconds) as the unit of time and to simplify checks for disabled idle states in the idle loop, some cpuidle fixes and governor updates, assorted cpufreq updates (driver updates mostly and a few core fixes and cleanups), devfreq updates (dominated by the tegra30 driver changes), new CPU IDs for the RAPL power capping driver, relatively minor updates of the generic power domains (genpd) and operation performance points (OPP) frameworks, and assorted fixes and cleanups. There are also two maintainer information updates: Chanwoo Choi will be maintaining the devfreq subsystem going forward and Todd Brandt is going to maintain the pm-graph utility (created by him). Specifics: - Use nanoseconds (instead of microseconds) as the unit of time in the cpuidle core and simplify checks for disabled idle states in the idle loop (Rafael Wysocki) - Fix and clean up the teo cpuidle governor (Rafael Wysocki) - Fix the cpuidle registration error code path (Zhenzhong Duan) - Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei) - Extend the idle injection infrastructure to be able to measure the requested duration in nanoseconds and to allow an exit latency limit for idle states to be specified (Daniel Lezcano) - Fix cpufreq driver registration and clarify a comment in the cpufreq core (Viresh Kumar) - Add NULL checks to the show() and store() methods of sysfs attributes exposed by cpufreq (Kai Shen) - Update cpufreq drivers: * Fix for a plain int as pointer warning from sparse in intel_pstate (Jamal Shareef) * Fix for a hardcoded number of CPUs and stack bloat in the powernv driver (John Hubbard) * Updates to the ti-cpufreq driver and DT files to support new platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford, H. Nikolaus Schaller) * Merging of the arm_big_little and vexpress-spc drivers and related cleanup (Sudeep Holla) * Fix for imx's default speed grade value (Anson Huang) * Minor cleanup of the s3c64xx driver (Nathan Chancellor) * CPU speed bin detection fix for sun50i (Ondrej Jirman) - Appoint Chanwoo Choi as the new devfreq maintainer. - Update the devfreq core: * Check NULL governor in available_governors_show sysfs to prevent showing wrong governor information and fix a race condition between devfreq_update_status() and trans_stat_show() (Leonard Crestez) * Add new 'interrupt-driven' flag for devfreq governors to allow interrupt-driven governors to prevent the devfreq core from polling devices for status (Dmitry Osipenko) * Improve an error message in devfreq_add_device() (Matthias Kaehlcke) - Update devfreq drivers: * tegra30 driver fixes and cleanups (Dmitry Osipenko) * Removal of unused property from dt-binding documentation for the exynos-bus driver (Kamil Konieczny) * exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek Szyprowski) - Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL power capping driver (Zhang Rui) - Allow device initialization in the generic power domains (genpd) framework to be more straightforward and clean it up (Ulf Hansson) - Add support for adjusting OPP voltages at run time to the OPP framework (Stephen Boyd) - Avoid freeing memory that has never been allocated in the hibernation core (Andy Whitcroft) - Clean up function headers in a header file and coding style in the wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan) - Clean up the SmartReflex adaptive voltage scaling (AVS) driver for ARM (Ben Dooks, Geert Uytterhoeven) - Wrap power management documentation to fit in 80 columns (Bjorn Helgaas) - Add pm-graph utility entry to MAINTAINERS (Todd Brandt) - Update the cpupower utility: * Fix the handling of set and info subcommands (Abhishek Goel) * Fix build warnings (Nathan Chancellor) * Improve mperf_monitor handling (Janakarajan Natarajan)" * tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits) PM: Wrap documentation to fit in 80 columns cpuidle: Pass exit latency limit to cpuidle_use_deepest_state() cpuidle: Allow idle injection to apply exit latency limit cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks cpuidle: teo: Avoid code duplication in conditionals cpufreq: Register drivers only after CPU devices have been registered cpuidle: teo: Avoid using "early hits" incorrectly cpuidle: teo: Exclude cpuidle overhead from computations PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch() mmc: tmio: Avoid boilerplate code in ->runtime_suspend() PM / Domains: Implement the ->start() callback for genpd PM / Domains: Introduce dev_pm_domain_start() ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition PM / wakeirq: remove unnecessary parentheses power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call cpuidle: Use nanoseconds as the unit of time PM / OPP: Support adjusting OPP voltages at runtime PM / core: Clean up some function headers in power.h cpufreq: Add NULL checks to show() and store() methods of cpufreq cpufreq: intel_pstate: Fix plain int as pointer warning from sparse ...
2019-11-25Merge tag 'regulator-v5.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Another fairly quiet release for the regulator API, some work all around including some core work but mostly in specialist or driver specific code: - Fix for powering off boot-on regulators - Enhancements to the coupled regulator support introduced in the last release - Conversion of a bunch of drivers to the fwnode API for GPIOs - Mode support for DA9062 - New device support for Qualcomm PM1650, PM8004 and PM895 and Silergy SR83X - Removal of obsolete AB8505 support" * tag 'regulator-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits) regulator: da9062: Return REGULATOR_MODE_INVALID for invalid mode regulator: Fix Kconfig indentation regulator: tps6105x: add optional devicetree support tps6105x: add optional devicetree support regulator: rn5t618: fix rc5t619 ldo10 enable regulator: vexpress: Use PTR_ERR_OR_ZERO() to simplify code dt-bindings: mfd: da9062: describe buck modes regulator: da9062: add of_map_mode support for bucks regulator: da9062: refactor buck modes into header regulator: stpmic1: Set a default ramp delay value regulator: core: Let boot-on regulators be powered off regulator: core: Don't try to remove device links if add failed regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id regulator: ab8500: Remove AB8505 USB regulator regulator: fan53555: add chip id for Silergy SYR83X regulator: fixed: add off-on-delay dt-bindings: regulator: fixed: add off-on-delay-us property regulator: core: Allow generic coupling only for always-on regulators regulator: core: Release coupled_rdevs on regulator_init_coupling() error regulator: bd70528: Add MODULE_ALIAS to allow module auto loading ...
2019-11-22dt-bindings: clock: Add devicetree binding for BM1880 SoCManivannan Sadhasivam
Add YAML devicetree binding for Bitmain BM1880 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20191115162901.17456-4-manivannan.sadhasivam@linaro.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-15regulator: da9062: refactor buck modes into headerChristoph Fritz
This patch refactors buck modes into a header file so that device trees can make use of these mode constants. The new header filename uses da9063 because DA9063 was the earlier chip and its driver code will want updating at some point in a similar manner. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Link: https://lore.kernel.org/r/1573652416-9848-2-git-send-email-chf.fritz@googlemail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-14dt-bindings: net: dp83869: Add TI dp83869 phyDan Murphy
Add dt bindings for the TI dp83869 Gigabit ethernet phy device. Signed-off-by: Dan Murphy <dmurphy@ti.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-13dt-bindings: clock: Add X1000 bindings.Zhou Yanjie
Add the clock bindings for the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Link: https://lkml.kernel.org/r/1573378102-72380-2-git-send-email-zhouyanjie@zoho.com Reviewed-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-11clk: tegra: Reimplement SOR clocks on Tegra210Thierry Reding
In order to allow the display driver to deal uniformly with all SOR generations, implement the SOR clocks in a way that is compatible with Tegra186 and later. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-11clk: tegra: Remove last remains of TEGRA210_CLK_SOR1_SRCThierry Reding
Later SoC generations implement this clock as SOR1_OUT. For consistency, the Tegra210 implementation was adapted to match the same name in commit 4d1dc4018573 ("dt-bindings: clock: tegra: Add sor1_out clock"). Clean up the remaining pieces by adopting the new name for the internal identifiers and remove the old alias. Note that since both SOR1_SRC and SOR1_OUT were referring to the same device tree clock ID, this does not break device tree ABI. Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-11-10Merge tag 'amlogic-dt64' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.5 Hightlights - new board; ugoos am6, based on G12B SoC - g12: add thermal driver and cooling properties - sm1: enable audio on SEI610 board - IR: add several keymaps - sdio: add keep-power-in-suspend property for multiple boards - pcie: add support for G12A - multiple fixes, cleanups * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (62 commits) arm64: dts: meson-gx: fix i2c compatible arm64: dts: meson-gx: cec node should be disabled by default arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible arm64: dts: meson-gxm: fix gpu irq order arm64: dts: meson-g12a: fix gpu irq order ARM64: dts: amlogic: adds crypto hardware node arm64: dts: meson-gxbb-vega-s95: set rc-vega-s9x ir keymap arm64: dts: meson-gxm-vega-s96: set rc-vega-s9x ir keymap arm64: dts: meson: g12b: add cooling properties arm64: dts: meson: g12a: add cooling properties arm64: dts: meson: g12: Add minimal thermal zone arm64: dts: meson: g12: add temperature sensor arm64: dts: meson: sei610: enable audio arm64: dts: meson: sm1: add audio devices dt-bindings: clock: meson: add sm1 resets to the axg-audio controller dt-bindings: clk: axg-audio: add sm1 bindings arm64: dts: meson-g12: add support for simplefb arm64: dts: meson: g12a: add audio devices resets arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator ... Link: https://lore.kernel.org/r/7hd0dzs0m1.fsf@baylibre.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-08Merge tag 'aspeed-5.5-devicetree' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.5 - Lots of work on the AST2600 boards as bringup continues. There's the eval board, and two IBM boards called Tacoma and Rainier - A new flash layout for OpenBMC systems with larger flashes - Better support for the MAC clocking when talking to a NCSI device, making Linux less reliant on u-boot having done the correct thing - LED fixes for vesin and fp5280g2 - SGPIO support - Facebook network BMC cleanup with the common hardware moved to a shared dtsi * tag 'aspeed-5.5-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (48 commits) ARM: dts: aspeed-g6: Add timer description ARM: dts: aspeed: ast2600evb: Enable i2c buses ARM: dts: aspeed-g5: Add SGPIO description ARM: dts: aspeed: yamp: Use common dtsi ARM: dts: aspeed: minipack: Use common dtsi ARM: dts: aspeed: cmm: Use common dtsi ARM: dts: aspeed: Common dtsi for Facebook AST2500 Network BMCs ARM: dts: aspeed: rainier: gpio-keys for PSU presence ARM: dts: aspeed: rainier: Fix i2c eeprom size ARM: dts: tacoma: Hog LPC pinmux ARM: dts: aspeed: rainier: Enable VUART1 ARM: dts: aspeed: rainier: Add i2c eeproms ARM: dts: aspeed: tacoma: Use 64MB for firmware memory ARM: dts: aspeed: tacoma: Add host FSI description ARM: dts: ast2600evb: Enable UART workaround ARM: dts: aspeed: tacoma: Add UART1 and workaround ARM: dts: aspeed-g6: Add remaining UARTs ARM: dts: aspeed-g6: Fix i2c clock source ARM: dts: aspeed: Add RCLK to MAC clocks for RMII interfaces ARM: dts: aspeed: tacoma: Enable FMC and SPI devices ... Link: https://lore.kernel.org/r/CACPK8Xe8XiJ+oEp3_AXO5Mox-mXWVrOJKQLJMKJxg1WdYCTzMw@mail.gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-08dt-bindings: interconnect: qcom: add msm8974 bindingsBrian Masney
Add device tree bindings for the Qualcomm MSM8974 interconnect providers that support setting system bandwidth requirements between various network-on-chip fabrics. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191024103054.9770-2-masneyb@onstation.org Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20191108125349.24191-2-georgi.djakov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-07clk: qcom: Enumerate clocks and reset needed to boot the 8998 modemJeffrey Hugo
We need to control five additional clocks and a reset inorder to boot the modem on msm8998. If we can boot the modem, we have a place to run the wlan firmware and get wifi up and running. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191107192136.5880-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-07dt-bindings: clock: Add sc7180 GCC clock bindingTaniya Das
Add device tree bindings for global clock subsystem clock controller for Qualcomm Technology Inc's SC7180 SoCs. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/20191014102308.27441-5-tdas@codeaurora.org Reviewed-by: Rob Herring <robh@kernel.org> [sboyd@kernel.org: Reword subject to make sc7180 specific, sort compatible] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-07clk: qcom: Add Q6SSTOP clock controller for QCS404Govind Singh
Add support for the Q6SSTOP clock control used on qcs404 based devices. This would allow wcss remoteproc driver to control the required WCSS Q6SSTOP clock/reset controls to bring the subsystem out of reset and shutdown the WCSS Q6DSP. Signed-off-by: Govind Singh <govinds@codeaurora.org> Link: https://lkml.kernel.org/r/20191011132928.9388-3-govinds@codeaurora.org [sboyd@kernel.org: Sort makefile] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-06dt-bindings: net: phy: Add support for AT803XMichael Walle
Document the Atheros AR803x PHY bindings. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06Merge tag 'qcom-drivers-for-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm ARM Based Driver Updates for v5.5 * Add Bjorn as QCOM co-maintainer * Add LLLC yaml bindings and SC7180 support * Fixups/Cleanup for LLLC * Add SMD-RPM MSM8976 compatible and interconnect device * Add missing RPMD SMD perf level * tag 'qcom-drivers-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: MAINTAINERS: Add myself as co-maintainer for QCOM dt-bindings: msm: Add LLCC for SC7180 dt-bindings: msm: Convert LLCC bindings to YAML soc: qcom: llcc: Add configuration data for SC7180 soc: qcom: llcc: Move regmap config to local variable soc: qcom: llcc: Name regmaps to avoid collisions soc: qcom: Fix llcc-qcom definitions to include soc: qcom: rpmpd: Add rpm power domains for msm8976 dt-bindings: power: Add missing rpmpd smd performance level soc: qcom: smd-rpm: Add MSM8976 compatible soc: qcom: socinfo: add sdm845 and sda845 soc ids soc: qcom: smd-rpm: Create RPM interconnect proxy child device soc: qcom: Make llcc-qcom a generic driver soc: qcom: Rename llcc-slice to llcc-qcom soc: qcom: llcc cleanup to get rid of sdm845 specific driver file Link: https://lore.kernel.org/r/1573068840-13098-4-git-send-email-agross@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-06dt-bindings: dmaengine: Add X1000 bindings.Zhou Yanjie
Add the dmaengine bindings for the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1571937670-30828-2-git-send-email-zhouyanjie@zoho.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-06include: dt-bindings: add Performance Monitoring Unit for ExynosLukasz Luba
This patch add support of a new feature which can be used in DT: Performance Monitoring Unit with defined event data type. In this patch the event data types are defined for Exynos PPMU. The patch also updates the MAINTAINERS file accordingly and adds the header file to devfreq event subsystem. Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-11-05clk: rockchip: Add div50 clock-ids for sdmmc on px30 and nandcFinley Xiao
EMMC and SDIO already have these clock-ids (still unused) only sdmmc is missing them, so fix that. Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20190917081903.25139-1-heiko@sntech.de
2019-11-05clk: sunxi-ng: h3: Export MBUS clockJernej Skrabec
MBUS clock will be referenced in MBUS controller node. Export it. Acked-by: Maxime Ripard <mripard@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2019-11-04pinctrl: add compatible for Amlogic Meson A1 pin controllerQianggui Song
Add new compatible name for Amlogic's Meson-A1 pin controller add a dt-binding header file which document the detail pin names. Note that A1 doesn't need DS bank reg any more, use gpio reg as base. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Link: https://lore.kernel.org/r/1572004167-24150-2-git-send-email-qianggui.song@amlogic.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-03Merge tag 'tegra-for-5.5-dt-bindings' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.5-rc1 This contains various updates to device tree bindings and includes that are related to driver changes in other Tegra branches. * tag 'tegra-for-5.5-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: memory: Add binding for NVIDIA Tegra30 External Memory Controller dt-bindings: memory: Add binding for NVIDIA Tegra30 Memory Controller dt-bindings: memory: tegra30: Convert to Tegra124 YAML dt-bindings: regulator: Document regulators coupling of NVIDIA Tegra20/30 SoCs dt-bindings: clock: tegra: Rename SOR0_LVDS to SOR0_OUT Link: https://lore.kernel.org/r/20191102144521.3863321-1-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'renesas-drivers-for-v5.5-tag2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers Renesas driver updates for v5.5 (take two) - Initial support for the R-Car M3-W+ (r8a77961) SoC, - A minor fix. * tag 'renesas-drivers-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: rcar-sysc: Add R8A77961 support soc: renesas: rcar-rst: Add R8A77961 support soc: renesas: Identify R-Car M3-W+ soc: renesas: Add ARCH_R8A77961 for new R-Car M3-W+ soc: renesas: Add ARCH_R8A77960 for existing R-Car M3-W soc: renesas: Rename SYSC_R8A7796 to SYSC_R8A77960 soc: renesas: Add missing check for non-zero product register address dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions Link: https://lore.kernel.org/r/20191101155842.31467-6-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'renesas-arm64-dt-for-v5.5-tag2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM64 DT updates for v5.5 (take two) - Video-Input and Serial-ATA support on RZ/G2N, - Color Management Module support on various R-Car Gen3 SoCs, - Initial support for the R-Car M3-W+ (r8a77961) SoC on the Salvator-XS board. * tag 'renesas-arm64-dt-for-v5.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W+ arm64: dts: renesas: Add Renesas R8A77961 SoC support arm64: dts: renesas: Prepare for rename of ARCH_R8A7796 to ARCH_R8A77960 dt-bindings: clock: Add r8a77961 CPG Core Clock Definitions dt-bindings: power: Add r8a77961 SYSC power domain definitions arm64: dts: renesas: r8a774b1: Add SATA controller node arm64: dts: renesas: rcar-gen3: Add CMM units arm64: dts: renesas: r8a774b1: Add VIN and CSI-2 support Link: https://lore.kernel.org/r/20191101155842.31467-5-geert+renesas@glider.be Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03Merge tag 'realtek-arm64-dt-for-5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/dt Realtek ARM64 based SoC DT for v5.5 Add RTD1293 and RTD1296 DTs. Add the watchdog for all of RTD129x DTs. Add reset controllers for RTD129x and start using them for UARTs. * tag 'realtek-arm64-dt-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: arm64: dts: realtek: Add RTD129x UART resets arm64: dts: realtek: Add RTD129x reset controller nodes dt-bindings: reset: Add Realtek RTD1295 arm64: dts: realtek: Add watchdog node for RTD129x arm64: dts: realtek: Add oscillator for RTD129x arm64: dts: realtek: Add RTD1296 and Synology DS418 dt-bindings: arm: realtek: Document RTD1296 and Synology DS418 arm64: dts: realtek: Add RTD1293 and Synology DS418j arm64: dts: realtek: Change dual-license from MIT to BSD dt-bindings: arm: realtek: Document RTD1293 and Synology DS418j dt-bindings: arm: realtek: Tidy up conversion to json-schema Link: https://lore.kernel.org/r/20191030041000.31848-2-afaerber@suse.de Signed-off-by: Olof Johansson <olof@lixom.net>
2019-11-03pinctrl: at91: Enable slewrate by default on SAM9X60Codrin Ciubotariu
On SAM9X60, slewrate should be enabled on pins with a switching frequency below 50Mhz. Since most of our pins do not exceed this value, we enable slewrate by default. Pins with a switching value that exceeds 50Mhz will have to explicitly disable slewrate. This patch changes the ABI. However, the slewrate macros are only used by SAM9X60 and, at this moment, there are no device-tree files available for this platform. Suggested-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20191101092031.24896-1-codrin.ciubotariu@microchip.com Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-01Merge tag 'renesas-r8a77961-dt-binding-defs-tag' into renesas-drivers-for-v5.5Geert Uytterhoeven
Renesas R-Car M3-W+ DT Binding Definitions Clock and Power Domain definitions for the Renesas R-Car M3-W+ (R8A77961) SoC, shared by driver and DT source files.
2019-11-01Merge tag 'renesas-r8a77961-dt-binding-defs-tag' into renesas-arm64-dt-for-v5.5Geert Uytterhoeven
Renesas R-Car M3-W+ DT Binding Definitions Clock and Power Domain definitions for the Renesas R-Car M3-W+ (R8A77961) SoC, shared by driver and DT source files.
2019-11-01Merge tag 'renesas-r8a77961-dt-binding-defs-tag' into clk-renesas-for-v5.5Geert Uytterhoeven
Renesas R-Car M3-W+ DT Binding Definitions Clock and Power Domain definitions for the Renesas R-Car M3-W+ (R8A77961) SoC, shared by driver and DT source files.
2019-11-01dt-bindings: clock: Add r8a77961 CPG Core Clock DefinitionsGeert Uytterhoeven
Add all Clock Pulse Generator Core Clock Outputs for the Renesas R-Car M3-W+ (R8A77961) SoC, as listed in Table 8.2b ("List of Clocks [R-Car M3-W/R-Car M3-W+]") of the R-Car Series, 3rd Generation Hardware User's Manual (Rev. 2.00, Jul. 31, 2019). A gap is added for CSIREF, to preserve compatibility with the definitions for R-Car M3-W (R8A77960). Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, SSPSRC, and POST2) are not included, as they are used as internal clock sources only, and never referenced from DT. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20191023122941.12342-3-geert+renesas@glider.be
2019-11-01dt-bindings: power: Add r8a77961 SYSC power domain definitionsGeert Uytterhoeven
Add power domain indices for the R-Car M3-W+ (R8A77961) SoC. Based on Rev. 2.00 of the R-Car Series, 3rd Generation, Hardware User’s Manual (Jul. 31, 2019). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/20191023122911.12166-6-geert+renesas@glider.be
2019-11-01dt-bindings: clock: Add AST2600 RMII RCLK gate definitionsAndrew Jeffery
The AST2600 has an explicit gate for the RMII RCLK for each of the four MACs. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-11-01dt-bindings: clock: Add AST2500 RMII RCLK definitionsAndrew Jeffery
The AST2500 has an explicit gate for the RMII RCLK for each of the two MACs. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2019-10-31dt-bindings: clk: add omap5 iva clkctrl definitionsTero Kristo
OMAP5 device contains an IVA subsystem (Image and Video Accelerator.) IVA subsystem clkctrl definitions are currently missing, so add them. Signed-off-by: Tero Kristo <t-kristo@ti.com>
2019-10-29dt-bindings: clock: tegra: Rename SOR0_LVDS to SOR0_OUTThierry Reding
Tegra186 and later call this clock SOR0_OUT. Rename it on Tegra124 and Tegra210 to make the names consistent. Keep the old name for now to keep device trees buildable until they have all been converted. Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-10-29dt-bindings: reset: Add Realtek RTD1295Andreas Färber
Add a header with symbolic reset indices for Realtek RTD1295 SoC. Naming was derived from reset-names in an OEM's Device Tree. Acked-by: Rob Herring <robh@kernel.org> [AF: Dropped RTD1295 specific binding definition, updated SPDX] Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Andreas Färber <afaerber@suse.de>
2019-10-28Merge tag 'reset-for-v5.5' of git://git.pengutronix.de/git/pza/linux into ↵Olof Johansson
arm/drivers Reset controller updates for v5.5 This tag adds support for Meson SM1 ARB resets, Uniphier Pro5 USB3 resets, the Meson-A1 reset controller, SocFPGA Agilex resets, and Realtek RTD1195/RTD1295 resets. It adds some reset controller API keywords for get_maintainers.pl and makes a few remaining reset_control_ops const. Also included are a conversion of the Qualcomm device tree bindings to yaml and a few small kerneldoc improvements. * tag 'reset-for-v5.5' of git://git.pengutronix.de/git/pza/linux: reset: document (devm_)reset_control_get_optional variants reset: improve of_xlate documentation reset: simple: Add Realtek RTD1195/RTD1295 reset: simple: Keep alphabetical order MAINTAINERS: add reset controller framework keywords reset: zynqmp: Make reset_control_ops const reset: hisilicon: hi3660: Make reset_control_ops const reset: build simple reset controller driver for Agilex reset: add support for the Meson-A1 SoC Reset Controller dt-bindings: reset: add bindings for the Meson-A1 SoC Reset Controller reset: uniphier-glue: Add Pro5 USB3 support dt-bindings: reset: pdc: Convert PDC Global bindings to yaml dt-bindings: reset: aoss: Convert AOSS reset bindings to yaml reset: Remove copy'n'paste redundancy in the comments reset: meson-audio-arb: add sm1 support reset: dt-bindings: meson: update arb bindings for sm1 Link: https://lore.kernel.org/r/ede6874508472d0917dca770ef80b90626b0f205.camel@pengutronix.de Signed-off-by: Olof Johansson <olof@lixom.net>