summaryrefslogtreecommitdiff
path: root/kernel/events
AgeCommit message (Collapse)Author
2016-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and co. at Google. https://lwn.net/Articles/701165/ 2) Do TCP Small Queues for retransmits, from Eric Dumazet. 3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei Starovoitov. 4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai. 5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn. 6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker. 7) Support ndo_poll_controller in mlx5, from Calvin Owens. 8) Move VRF processing to an output hook and allow l3mdev to be loopback, from David Ahern. 9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern. 10) Congestion control in RXRPC, from David Howells. 11) Support geneve RX offload in ixgbe, from Emil Tantilov. 12) When hitting pressure for new incoming TCP data SKBs, perform a partial rathern than a full purge of the OFO queue (which could be huge). From Eric Dumazet. 13) Convert XFRM state and policy lookups to RCU, from Florian Westphal. 14) Support RX network flow classification to igb, from Gangfeng Huang. 15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski. 16) New skbmod packet action, from Jamal Hadi Salim. 17) Remove some inefficiencies in snmp proc output, from Jia He. 18) Add FIB notifications to properly propagate route changes to hardware which is doing forwarding offloading. From Jiri Pirko. 19) New dsa driver for qca8xxx chips, from John Crispin. 20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej Żenczykowski. 21) Add L3 mode to ipvlan, from Mahesh Bandewar. 22) Support 802.1ad in mlx4, from Moshe Shemesh. 23) Support hardware LRO in mediatek driver, from Nelson Chang. 24) Add TC offloading to mlx5, from Or Gerlitz. 25) Convert various drivers to ethtool ksettings interfaces, from Philippe Reynes. 26) TX max rate limiting for cxgb4, from Rahul Lakkireddy. 27) NAPI support for ath10k, from Rajkumar Manoharan. 28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed. 29) UDP replicast support in TIPC, from Richard Alpe. 30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru. 31) Support BQL in thunderx driver, from Sunil Goutham. 32) TSO support in alx driver, from Tobias Regnery. 33) Add stream parser engine and use it in kcm. 34) Support async DHCP replies in ipconfig module, from Uwe Kleine-König. 35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits) mlxsw: switchx2: Fix misuse of hard_header_len mlxsw: spectrum: Fix misuse of hard_header_len net/faraday: Stop NCSI device on shutdown net/ncsi: Introduce ncsi_stop_dev() net/ncsi: Rework the channel monitoring net/ncsi: Allow to extend NCSI request properties net/ncsi: Rework request index allocation net/ncsi: Don't probe on the reserved channel ID (0x1f) net/ncsi: Introduce NCSI_RESERVED_CHANNEL net/ncsi: Avoid unused-value build warning from ia64-linux-gcc net: Add netdev all_adj_list refcnt propagation to fix panic net: phy: Add Edge-rate driver for Microsemi PHYs. vmxnet3: Wake queue from reset work i40e: avoid NULL pointer dereference and recursive errors on early PCI error qed: Add RoCE ll2 & GSI support qed: Add support for memory registeration verbs qed: Add support for QP verbs qed: PD,PKEY and CQ verb support qed: Add support for RoCE hw init qede: Add qedr framework ...
2016-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three sets of overlapping changes. Nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-09-23Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-22perf/core: Limit matching exclusive events to one PMUAlexander Shishkin
An "exclusive" PMU is the one that can only have one event scheduled in at any given time. There may be more than one of such PMUs in a system, though, like Intel PT and BTS. It should be allowed to have one event for either of those inside the same context (there may be other constraints that may prevent this, but those would be hardware-specific). However, the exclusivity code is written so that only one event from any of the "exclusive" PMUs is allowed in a context. Fix this by making the exclusive event filter explicitly match two events' PMUs. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160920154811.3255-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-10Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-10perf/core: Fix aux_mmap_count vs aux_refcount orderAlexander Shishkin
The order of accesses to ring buffer's aux_mmap_count and aux_refcount has to be preserved across the users, namely perf_mmap_close() and perf_aux_output_begin(), otherwise the inversion can result in the latter holding the last reference to the aux buffer and subsequently free'ing it in atomic context, triggering a warning. > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 257 at kernel/events/ring_buffer.c:541 __rb_free_aux+0x11a/0x130 > CPU: 0 PID: 257 Comm: stopbug Not tainted 4.8.0-rc1+ #2596 > Call Trace: > [<ffffffff810f3e0b>] __warn+0xcb/0xf0 > [<ffffffff810f3f3d>] warn_slowpath_null+0x1d/0x20 > [<ffffffff8121182a>] __rb_free_aux+0x11a/0x130 > [<ffffffff812127a8>] rb_free_aux+0x18/0x20 > [<ffffffff81212913>] perf_aux_output_begin+0x163/0x1e0 > [<ffffffff8100c33a>] bts_event_start+0x3a/0xd0 > [<ffffffff8100c42d>] bts_event_add+0x5d/0x80 > [<ffffffff81203646>] event_sched_in.isra.104+0xf6/0x2f0 > [<ffffffff8120652e>] group_sched_in+0x6e/0x190 > [<ffffffff8120694e>] ctx_sched_in+0x2fe/0x5f0 > [<ffffffff81206ca0>] perf_event_sched_in+0x60/0x80 > [<ffffffff81206d1b>] ctx_resched+0x5b/0x90 > [<ffffffff81207281>] __perf_event_enable+0x1e1/0x240 > [<ffffffff81200639>] event_function+0xa9/0x180 > [<ffffffff81202000>] ? perf_cgroup_attach+0x70/0x70 > [<ffffffff8120203f>] remote_function+0x3f/0x50 > [<ffffffff811971f3>] flush_smp_call_function_queue+0x83/0x150 > [<ffffffff81197bd3>] generic_smp_call_function_single_interrupt+0x13/0x60 > [<ffffffff810a6477>] smp_call_function_single_interrupt+0x27/0x40 > [<ffffffff81a26ea9>] call_function_single_interrupt+0x89/0x90 > [<ffffffff81120056>] finish_task_switch+0xa6/0x210 > [<ffffffff81120017>] ? finish_task_switch+0x67/0x210 > [<ffffffff81a1e83d>] __schedule+0x3dd/0xb50 > [<ffffffff81a1efe5>] schedule+0x35/0x80 > [<ffffffff81128031>] sys_sched_yield+0x61/0x70 > [<ffffffff81a25be5>] entry_SYSCALL_64_fastpath+0x18/0xa8 > ---[ end trace 6235f556f5ea83a9 ]--- This patch puts the checks in perf_aux_output_begin() in the same order as that of perf_mmap_close(). Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160906132353.19887-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-10perf/core: Fix a race between mmap_close() and set_output() of AUX eventsAlexander Shishkin
In the mmap_close() path we need to stop all the AUX events that are writing data to the AUX area that we are unmapping, before we can safely free the pages. To determine if an event needs to be stopped, we're comparing its ->rb against the one that's getting unmapped. However, a SET_OUTPUT ioctl may turn up inside an AUX transaction and swizzle event::rb to some other ring buffer, but the transaction will keep writing data to the old ring buffer until the event gets scheduled out. At this point, mmap_close() will skip over such an event and will proceed to free the AUX area, while it's still being used by this event, which will set off a warning in the mmap_close() path and cause a memory corruption. To avoid this, always stop an AUX event before its ->rb is updated; this will release the (potentially) last reference on the AUX area of the buffer. If the event gets restarted, its new ring buffer will be used. If another SET_OUTPUT comes and switches it back to the old ring buffer that's getting unmapped, it's also fine: this ring buffer's aux_mmap_count will be zero and AUX transactions won't start any more. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160906132353.19887-2-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-06perf, bpf: fix conditional call to bpf_overflow_handlerArnd Bergmann
The newly added bpf_overflow_handler function is only built of both CONFIG_EVENT_TRACING and CONFIG_BPF_SYSCALL are enabled, but the caller only checks the latter: kernel/events/core.c: In function 'perf_event_alloc': kernel/events/core.c:9106:27: error: 'bpf_overflow_handler' undeclared (first use in this function) This changes the caller so we also skip this call if CONFIG_EVENT_TRACING is disabled entirely. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: aa6a5f3cb2b2 ("perf, bpf: add perf events core support for BPF_PROG_TYPE_PERF_EVENT programs") Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-05perf/core: Don't pass PERF_EF_START to the PMU ->start callbackWill Deacon
PERF_EF_START is a flag to indicate to the PMU ->add() callback that, as well as claiming the PMU resources required by the event being added, it should also start the PMU. Passing this flag to the ->start() callback doesn't make sense, because ->start() always tries to start the PMU. Remove it. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: mark.rutland@arm.com Link: http://lkml.kernel.org/r/1471257765-29662-1-git-send-email-will.deacon@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-05Merge branch 'perf/urgent' into perf/core, to pick up fixed and resolve ↵Ingo Molnar
conflicts Conflicts: kernel/events/core.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-05perf/core: Remove WARN from perf_event_read()Peter Zijlstra
This effectively reverts commit: 71e7bc2bab77 ("perf/core: Check return value of the perf_event_read() IPI") ... and puts in a comment explaining why we ignore the return value. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 71e7bc2bab77 ("perf/core: Check return value of the perf_event_read() IPI") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-02perf, bpf: add perf events core support for BPF_PROG_TYPE_PERF_EVENT programsAlexei Starovoitov
Allow attaching BPF_PROG_TYPE_PERF_EVENT programs to sw and hw perf events via overflow_handler mechanism. When program is attached the overflow_handlers become stacked. The program acts as a filter. Returning zero from the program means that the normal perf_event_output handler will not be called and sampling event won't be stored in the ring buffer. The overflow_handler_context==NULL is an additional safety check to make sure programs are not attached to hw breakpoints and watchdog in case other checks (that prevent that now anyway) get accidentally relaxed in the future. The program refcnt is incremented in case perf_events are inhereted when target task is forked. Similar to kprobe and tracepoint programs there is no ioctl to detach the program or swap already attached program. The user space expected to close(perf_event_fd) like it does right now for kprobe+bpf. That restriction simplifies the code quite a bit. The invocation of overflow_handler in __perf_event_overflow() is now done via READ_ONCE, since that pointer can be replaced when the program is attached while perf_event itself could have been active already. There is no need to do similar treatment for event->prog, since it's assigned only once before it's accessed. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-24perf/core: Use this_cpu_ptr() when stopping AUX eventsWill Deacon
When tearing down an AUX buf for an event via perf_mmap_close(), __perf_event_output_stop() is called on the event's CPU to ensure that trace generation is halted before the process of unmapping and freeing the buffer pages begins. The callback is performed via cpu_function_call(), which ensures that it runs with interrupts disabled and is therefore not preemptible. Unfortunately, the current code grabs the per-cpu context pointer using get_cpu_ptr(), which unnecessarily disables preemption and doesn't pair the call with put_cpu_ptr(), leading to a preempt_count() imbalance and a BUG when freeing the AUX buffer later on: WARNING: CPU: 1 PID: 2249 at kernel/events/ring_buffer.c:539 __rb_free_aux+0x10c/0x120 Modules linked in: [...] Call Trace: [<ffffffff813379dd>] dump_stack+0x4f/0x72 [<ffffffff81059ff6>] __warn+0xc6/0xe0 [<ffffffff8105a0c8>] warn_slowpath_null+0x18/0x20 [<ffffffff8112761c>] __rb_free_aux+0x10c/0x120 [<ffffffff81128163>] rb_free_aux+0x13/0x20 [<ffffffff8112515e>] perf_mmap_close+0x29e/0x2f0 [<ffffffff8111da30>] ? perf_iterate_ctx+0xe0/0xe0 [<ffffffff8115f685>] remove_vma+0x25/0x60 [<ffffffff81161796>] exit_mmap+0x106/0x140 [<ffffffff8105725c>] mmput+0x1c/0xd0 [<ffffffff8105cac3>] do_exit+0x253/0xbf0 [<ffffffff8105e32e>] do_group_exit+0x3e/0xb0 [<ffffffff81068d49>] get_signal+0x249/0x640 [<ffffffff8101c273>] do_signal+0x23/0x640 [<ffffffff81905f42>] ? _raw_write_unlock_irq+0x12/0x30 [<ffffffff81905f69>] ? _raw_spin_unlock_irq+0x9/0x10 [<ffffffff81901896>] ? __schedule+0x2c6/0x710 [<ffffffff810022a4>] exit_to_usermode_loop+0x74/0x90 [<ffffffff81002a56>] prepare_exit_to_usermode+0x26/0x30 [<ffffffff81906d1b>] retint_user+0x8/0x10 This patch uses this_cpu_ptr() instead of get_cpu_ptr(), since preemption is already disabled by the caller. Signed-off-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 95ff4ca26c49 ("perf/core: Free AUX pages in unmap path") Link: http://lkml.kernel.org/r/20160824091905.GA16944@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Introduce PMU_EV_CAP_READ_ACTIVE_PKGDavid Carrillo-Cisneros
Introduce the flag PMU_EV_CAP_READ_ACTIVE_PKG, useful for uncore events, that allows a PMU to signal the generic perf code that an event is readable in the current CPU if the event is active in a CPU in the same package as the current CPU. This is an optimization that avoids a unnecessary IPI for the common case where uncore events are run and read in the same package but in different CPUs. As an example, the IPI removal speeds up perf_read() in my Haswell system as follows: - For event UNC_C_LLC_LOOKUP: From 260 us to 31 us. - For event RAPL's power/energy-cores/: From to 255 us to 27 us. For the optimization to work, all events in the group must have it (similarly to PERF_EV_CAP_SOFTWARE). Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1471467307-61171-4-git-send-email-davidcc@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Generalize event->group_flagsDavid Carrillo-Cisneros
Currently, PERF_GROUP_SOFTWARE is used in the group_flags field of a group's leader to indicate that is_software_event(event) is true for all events in a group. This is the only usage of event->group_flags. This pattern of setting a group level flags when all events in the group share a property is useful for the flag introduced in the next patch and for future CQM/CMT flags. So this patches generalizes group_flags to work as an aggregate of event level flags. PERF_GROUP_SOFTWARE denotes an inmutable event's property. All other flags that I intend to add are also determinable at event initialization. To better convey the above, this patch renames event's group_flags to group_caps and PERF_GROUP_SOFTWARE to PERF_EV_CAP_SOFTWARE. Individual event flags are stored in the new event->event_caps. Since the cap flags do not change after event initialization, there is no need to serialize event_caps. This new field is used when events are added to a context, similarly to how PERF_GROUP_SOFTWARE and is_software_event() worked. Lastly, for consistency, updates is_software_event() to rely in event_cap instead of the context index. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1471467307-61171-3-git-send-email-davidcc@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18bitmap.h, perf/core: Fix the mask in perf_output_sample_regs()Madhavan Srinivasan
When decoding the perf_regs mask in perf_output_sample_regs(), we loop through the mask using find_first_bit and find_next_bit functions. While the exisiting code works fine in most of the case, the logic is broken for big-endian 32-bit kernels. When reading a u64 mask using (u32 *)(&val)[0], find_*_bit() assumes that it gets the lower 32 bits of u64, but instead it gets the upper 32 bits - which is wrong. The fix is to swap the words of the u64 to handle this case. This is _not_ a regular endianness swap. Suggested-by: Yury Norov <ynorov@caviumnetworks.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Yury Norov <ynorov@caviumnetworks.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1471426568-31051-2-git-send-email-maddy@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18Merge branch 'perf/urgent' into perf/core, to pick up dependenciesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Check return value of the perf_event_read() IPIDavid Carrillo-Cisneros
The call to smp_call_function_single in perf_event_read() may fail if an invalid or not online CPU index is passed. Warn user if such bug is present and return error. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1471467307-61171-2-git-send-email-davidcc@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Enable mapping of the stop filtersMathieu Poirier
At this time the perf_addr_filter_needs_mmap() function will _not_ return true on a user space 'stop' filter. But stop filters need exactly the same kind of mapping that range and start filters get. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-4-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Update filters only on executable mmapMathieu Poirier
Function perf_event_mmap() is called by the MM subsystem each time part of a binary is loaded in memory. There can be several mapping for a binary, many times unrelated to the code section. Each time a section of a binary is mapped address filters are updated, event when the map doesn't pertain to the code section. The end result is that filters are configured based on the last map event that was received rather than the last mapping of the code segment. For example if we have an executable 'main' that calls library 'libcstest.so.1.0', and that we want to collect traces on code that is in that library. The perf cmd line for this scenario would be: perf record -e cs_etm// --filter 'filter 0x72c/0x40@/opt/lib/libcstest.so.1.0' --per-thread ./main Resulting in binaries being mapped this way: root@linaro-nano:~# cat /proc/1950/maps 00400000-00401000 r-xp 00000000 08:02 33169 /home/linaro/main 00410000-00411000 r--p 00000000 08:02 33169 /home/linaro/main 00411000-00412000 rw-p 00001000 08:02 33169 /home/linaro/main 7fa2464000-7fa2474000 rw-p 00000000 00:00 0 7fa2474000-7fa25a4000 r-xp 00000000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25a4000-7fa25b3000 ---p 00130000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b3000-7fa25b7000 r--p 0012f000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b7000-7fa25b9000 rw-p 00133000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so 7fa25b9000-7fa25bd000 rw-p 00000000 00:00 0 7fa25bd000-7fa25be000 r-xp 00000000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25be000-7fa25cd000 ---p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25cd000-7fa25ce000 r--p 00000000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25ce000-7fa25cf000 rw-p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0 7fa25cf000-7fa25eb000 r-xp 00000000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7fa25ef000-7fa25f2000 rw-p 00000000 00:00 0 7fa25f7000-7fa25f9000 rw-p 00000000 00:00 0 7fa25f9000-7fa25fa000 r--p 00000000 00:00 0 [vvar] 7fa25fa000-7fa25fb000 r-xp 00000000 00:00 0 [vdso] 7fa25fb000-7fa25fc000 r--p 0001c000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7fa25fc000-7fa25fe000 rw-p 0001d000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so 7ff2ea8000-7ff2ec9000 rw-p 00000000 00:00 0 [stack] root@linaro-nano:~# Before 'main()' can execute 'libcstest.so.1.0' has to be loaded in memory. Once that has been done perf_event_mmap() has been called 4 times, with the last map starting at address 0x7fa25ce000 and the address filter configured to start filtering when the IP has passed over address 0x0x7fa25ce72c (0x7fa25ce000 + 0x72c). But that is wrong since the code segment for library 'libcstest.so.1.0' as been mapped at 0x7fa25bd000, resulting in traces not being collected. This patch corrects the situation by requesting that address filters be updated only if the mapped event is for a code segment. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-3-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Fix file name handling for start/stop filtersMathieu Poirier
Binary file names have to be supplied for both range and start/stop filters but the current code only processes the filename if an address range filter is specified. This code adds processing of the filename for start/stop filters. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1468860187-318-2-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18perf/core: Fix event_function_local()Peter Zijlstra
Vincent reported triggering the WARN_ON_ONCE() in event_function_local(). While thinking through cases I noticed that by using event_function() directly, we miss the inactive case usually handled by event_function_call(). Therefore construct a blend of event_function_call() and event_function() that handles the cases relevant to event_function_local(). Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # 4.5+ Fixes: fae3fde65138 ("perf: Collapse and fix event_function_call() users") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18uprobes: Rename the "struct page *" args of __replace_page()Oleg Nesterov
Purely cosmetic, no changes in the compiled code. Perhaps it is just me but I can hardly read __replace_page() because I can't distinguish "page" from "kpage" and because I need to look at the caller to to ensure that, say, kpage is really the new page and the code is correct. Rename them to old_page and new_page, this matches the caller. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brenden Blanco <bblanco@plumgrid.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Link: http://lkml.kernel.org/r/20160817153704.GC29724@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18Merge branch 'perf/urgent' into perf/core, to pick up dependencyIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-18uprobes: Fix the memcg accountingOleg Nesterov
__replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path, it should only do this if page_check_address() fails. This means that every enable/disable leads to unbalanced mem_cgroup_uncharge() from put_page(old_page), it is trivial to underflow the page_counter->count and trigger OOM. Reported-and-tested-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: stable@vger.kernel.org # 3.17+ Fixes: 00501b531c47 ("mm: memcontrol: rewrite charge API") Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10perf/core: Optimize perf_pmu_sched_task()Peter Zijlstra
For perf record -b, which requires the pmu::sched_task callback the current code is rather expensive: 7.68% sched-pipe [kernel.vmlinux] [k] perf_pmu_sched_task 5.95% sched-pipe [kernel.vmlinux] [k] __switch_to 5.20% sched-pipe [kernel.vmlinux] [k] __intel_pmu_disable_all 3.95% sched-pipe perf [.] worker_thread The problem is that it will iterate all registered PMUs, most of which will not have anything to do. Avoid this by keeping an explicit list of PMUs that have requested the callback. The perf_sched_cb_{inc,dec}() functions already takes the required pmu argument, and now that these functions are no longer called from NMI context we can use them to manage a list. With this patch applied the function doesn't show up in the top 4 anymore (it dropped to 18th place). 6.67% sched-pipe [kernel.vmlinux] [k] __switch_to 6.18% sched-pipe [kernel.vmlinux] [k] __intel_pmu_disable_all 3.92% sched-pipe [kernel.vmlinux] [k] switch_mm_irqs_off 3.71% sched-pipe perf [.] worker_thread Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10perf/x86/intel: Rework the large PEBS setup codePeter Zijlstra
In order to allow optimizing perf_pmu_sched_task() we must ensure perf_sched_cb_{inc,dec}() are no longer called from NMI context; this means that pmu::{start,stop}() can no longer use them. Prepare for this by reworking the whole large PEBS setup code. The current code relied on the cpuc->pebs_enabled state, however since that reflects the current active state as per pmu::{start,stop}() we can no longer rely on this. Introduce two counters: cpuc->n_pebs and cpuc->n_large_pebs which count the total number of PEBS events and the number of PEBS events that have FREERUNNING set, resp.. With this we can tell if the current setup requires a single record interrupt threshold or can use a larger buffer. This also improves the code in that it re-enables the large threshold once the PEBS event that required single record gets removed. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10perf/core: Sched out groups atomicallyMark Rutland
Groups of events are supposed to be scheduled atomically, such that it is possible to derive meaningful ratios between their values. We take great pains to achieve this when scheduling event groups to a PMU in group_sched_in(), calling {start,commit}_txn() (which fall back to perf_pmu_{disable,enable}() if necessary) to provide this guarantee. However we don't mirror this in group_sched_out(), and in some cases events will not be scheduled out atomically. For example, if we disable an event group with PERF_EVENT_IOC_DISABLE, we'll cross-call __perf_event_disable() for the group leader, and will call group_sched_out() without having first disabled the relevant PMU. We will disable/enable the PMU around each pmu->del() call, but between each call the PMU will be enabled and events may count. Avoid this by explicitly disabling and enabling the PMU around event removal in group_sched_out(), mirroring what we do in group_sched_in(). Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1469553141-28314-1-git-send-email-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10perf/core: Set cgroup in CPU contexts for new cgroup eventsDavid Carrillo-Cisneros
There's a perf stat bug easy to observer on a machine with only one cgroup: $ perf stat -e cycles -I 1000 -C 0 -G / # time counts unit events 1.000161699 <not counted> cycles / 2.000355591 <not counted> cycles / 3.000565154 <not counted> cycles / 4.000951350 <not counted> cycles / We'd expect some output there. The underlying problem is that there is an optimization in perf_cgroup_sched_{in,out}() that skips the switch of cgroup events if the old and new cgroups in a task switch are the same. This optimization interacts with the current code in two ways that cause a CPU context's cgroup (cpuctx->cgrp) to be NULL even if a cgroup event matches the current task. These are: 1. On creation of the first cgroup event in a CPU: In current code, cpuctx->cpu is only set in perf_cgroup_sched_in, but due to the aforesaid optimization, perf_cgroup_sched_in will run until the next cgroup switches in that CPU. This may happen late or never happen, depending on system's number of cgroups, CPU load, etc. 2. On deletion of the last cgroup event in a cpuctx: In list_del_event, cpuctx->cgrp is set NULL. Any new cgroup event will not be sched in because cpuctx->cgrp == NULL until a cgroup switch occurs and perf_cgroup_sched_in is executed (updating cpuctx->cgrp). This patch fixes both problems by setting cpuctx->cgrp in list_add_event, mirroring what list_del_event does when removing a cgroup event from CPU context, as introduced in: commit 68cacd29167b ("perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()") With this patch, cpuctx->cgrp is always set/clear when installing/removing the first/last cgroup event in/from the CPU context. With cpuctx->cgrp correctly set, event_filter_match works as intended when events are sched in/out. After the fix, the output is as expected: $ perf stat -e cycles -I 1000 -a -G / # time counts unit events 1.004699159 627342882 cycles / 2.007397156 615272690 cycles / 3.010019057 616726074 cycles / Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1470124092-113192-1-git-send-email-davidcc@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-10perf/core: Fix sideband list-iteration vs. event ordering NULL pointer ↵Peter Zijlstra
deference crash Vegard Nossum reported that perf fuzzing generates a NULL pointer dereference crash: > Digging a bit deeper into this, it seems the event itself is getting > created by perf_event_open() and it gets added to the pmu_event_list > through: > > perf_event_open() > - perf_event_alloc() > - account_event() > - account_pmu_sb_event() > - attach_sb_event() > > so at this point the event is being attached but its ->ctx is still > NULL. It seems like ->ctx is set just a bit later in > perf_event_open(), though. > > But before that, __schedule() comes along and creates a stack trace > similar to the one above: > > __schedule() > - __perf_event_task_sched_out() > - perf_iterate_sb() > - perf_iterate_sb_cpu() > - event_filter_match() > - perf_cgroup_match() > - __get_cpu_context() > - (dereference ctx which is NULL) > > So I guess the question is... should the event be attached (= put on > the list) before ->ctx gets set? Or should the cgroup code check for a > NULL ->ctx? The latter seems like the simplest solution. Moving the list-add later creates a bit of a mess. Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Tested-by: Vegard Nossum <vegard.nossum@gmail.com> Tested-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: f2fb6bef9251 ("perf/core: Optimize side-band event delivery") Link: http://lkml.kernel.org/r/20160804123724.GN6862@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-08-02perf/core: Change log level for duration warning to KERN_INFODavid Ahern
When the perf interrupt handler exceeds a threshold warning messages are displayed on console: [12739.31793] perf interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [71340.165065] perf interrupt took too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 Many customers and users are confused by the message wondering if something is wrong or they need to take action to fix a problem. Since a user can not do anything to fix the issue, the message is really more informational than a warning. Adjust the log level accordingly. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1470084569-438-1-git-send-email-dsa@cumulusnetworks.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-29Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug updates from Thomas Gleixner: "This is the next part of the hotplug rework. - Convert all notifiers with a priority assigned - Convert all CPU_STARTING/DYING notifiers The final removal of the STARTING/DYING infrastructure will happen when the merge window closes. Another 700 hundred line of unpenetrable maze gone :)" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) timers/core: Correct callback order during CPU hot plug leds/trigger/cpu: Move from CPU_STARTING to ONLINE level powerpc/numa: Convert to hotplug state machine arm/perf: Fix hotplug state machine conversion irqchip/armada: Avoid unused function warnings ARC/time: Convert to hotplug state machine clocksource/atlas7: Convert to hotplug state machine clocksource/armada-370-xp: Convert to hotplug state machine clocksource/exynos_mct: Convert to hotplug state machine clocksource/arm_global_timer: Convert to hotplug state machine rcu: Convert rcutree to hotplug state machine KVM/arm/arm64/vgic-new: Convert to hotplug state machine smp/cfd: Convert core to hotplug state machine x86/x2apic: Convert to CPU hotplug state machine profile: Convert to hotplug state machine timers/core: Convert to hotplug state machine hrtimer: Convert to hotplug state machine x86/tboot: Convert to hotplug state machine arm64/armv8 deprecated: Convert to hotplug state machine hwtracing/coresight-etm4x: Convert to hotplug state machine ...
2016-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Unified UDP encapsulation offload methods for drivers, from Alexander Duyck. 2) Make DSA binding more sane, from Andrew Lunn. 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli. 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar. 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX packets as soon as the device sees them, with the option to mirror the packet on TX via the same interface. From Brenden Blanco and others. 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet. 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli. 8) Simplify netlink conntrack entry layout, from Florian Westphal. 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido Schimmel, Yotam Gigi, and Jiri Pirko. 10) Add SKB array infrastructure and convert tun and macvtap over to it. From Michael S Tsirkin and Jason Wang. 11) Support qdisc packet injection in pktgen, from John Fastabend. 12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy. 13) Add NV congestion control support to TCP, from Lawrence Brakmo. 14) Add GSO support to SCTP, from Marcelo Ricardo Leitner. 15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni. 16) Support MPLS over IPV4, from Simon Horman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits) xgene: Fix build warning with ACPI disabled. be2net: perform temperature query in adapter regardless of its interface state l2tp: Correctly return -EBADF from pppol2tp_getname. net/mlx5_core/health: Remove deprecated create_singlethread_workqueue net: ipmr/ip6mr: update lastuse on entry change macsec: ensure rx_sa is set when validation is disabled tipc: dump monitor attributes tipc: add a function to get the bearer name tipc: get monitor threshold for the cluster tipc: make cluster size threshold for monitoring configurable tipc: introduce constants for tipc address validation net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update() MAINTAINERS: xgene: Add driver and documentation path Documentation: dtb: xgene: Add MDIO node dtb: xgene: Add MDIO node drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset drivers: net: xgene: Use exported functions drivers: net: xgene: Enable MDIO driver drivers: net: xgene: Add backward compatibility drivers: net: phy: xgene: Add MDIO driver ...
2016-07-25bpf, events: fix offset in skb copy handlerDaniel Borkmann
This patch fixes the __output_custom() routine we currently use with bpf_skb_copy(). I missed that when len is larger than the size of the current handle, we can issue multiple invocations of copy_func, and __output_custom() advances destination but also source buffer by the written amount of bytes. When we have __output_custom(), this is actually wrong since in that case the source buffer points to a non-linear object, in our case an skb, which the copy_func helper is supposed to walk. Therefore, since this is non-linear we thus need to pass the offset into the helper, so that copy_func can use it for extracting the data from the source object. Therefore, adjust the callback signatures properly and pass offset into the skb_header_pointer() invoked from bpf_skb_copy() callback. The __DEFINE_OUTPUT_COPY_BODY() is adjusted to accommodate for two things: i) to pass in whether we should advance source buffer or not; this is a compile-time constant condition, ii) to pass in the offset for __output_custom(), which we do with help of __VA_ARGS__, so everything can stay inlined as is currently. Both changes allow for adapting the __output_* fast-path helpers w/o extra overhead. Fixes: 555c8a8623a3 ("bpf: avoid stack copy and use skb ctx for event output") Fixes: 7e3f977edd0b ("perf, events: add non-linear data support for raw records") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15perf, events: add non-linear data support for raw recordsDaniel Borkmann
This patch adds support for non-linear data on raw records. It extends raw records to have one or multiple fragments that will be written linearly into the ring slot, where each fragment can optionally have a custom callback handler to walk and extract complex, possibly non-linear data. If a callback handler is provided for a fragment, then the new __output_custom() will be used instead of __output_copy() for the perf_output_sample() part. perf_prepare_sample() does all the size calculation only once, so perf_output_sample() doesn't need to redo the same work anymore, meaning real_size and padding will be cached in the raw record. The raw record becomes 32 bytes in size without holes; to not increase it further and to avoid doing unnecessary recalculations in fast-path, we can reuse next pointer of the last fragment, idea here is borrowed from ZERO_OR_NULL_PTR(), which should keep the perf_output_sample() path for PERF_SAMPLE_RAW minimal. This facility is needed for BPF's event output helper as a first user that will, in a follow-up, add an additional perf_raw_frag to its perf_raw_record in order to be able to more efficiently dump skb context after a linear head meta data related to it. skbs can be non-linear and thus need a custom output function to dump buffers. Currently, the skb data needs to be copied twice; with the help of __output_custom() this work only needs to be done once. Future users could be things like XDP/BPF programs that work on different context though and would thus also have a different callback function. The few users of raw records are adapted to initialize their frag data from the raw record itself, no change in behavior for them. The code is based upon a PoC diff provided by Peter Zijlstra [1]. [1] http://thread.gmane.org/gmane.linux.network/421294 Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14perf/core: Convert to hotplug state machineThomas Gleixner
Actually a nice symmetric startup/teardown pair which fits properly into the state machine concept. In the long run we should be able to invoke the startup callback for the boot CPU via the state machine and get rid of the init function which invokes it on the boot CPU. Note: This comes actually before the perf hardware callbacks. In the notifier model the hardware callbacks have a higher priority than the core callback. But that's solely for CPU offline so that hardware migration of events happens before the core is notified about the outgoing CPU. With the symetric state array model we have the following ordering: UP: core -> hardware DOWN: hardware -> core Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Reviewed-by: Sebastian Siewior <bigeasy@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153333.587514098@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07Merge branch 'perf/urgent' into perf/core, to pick up fixes before merging ↵Ingo Molnar
new changes Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-07perf/core: Fix pmu::filter_match for SW-led groupsMark Rutland
The following commit: 66eb579e66ec ("perf: allow for PMU-specific event filtering") added the pmu::filter_match() callback. This was intended to avoid HW constraints on events from resulting in extremely pessimistic scheduling. However, pmu::filter_match() is only called for the leader of each event group. When the leader is a SW event, we do not filter the groups, and may fail at pmu::add() time, and when this happens we'll give up on scheduling any event groups later in the list until they are rotated ahead of the failing group. This can result in extremely sub-optimal event scheduling behaviour, e.g. if running the following on a big.LITTLE platform: $ taskset -c 0 ./perf stat \ -e 'a57{context-switches,armv8_cortex_a57/config=0x11/}' \ -e 'a53{context-switches,armv8_cortex_a53/config=0x11/}' \ ls <not counted> context-switches (0.00%) <not counted> armv8_cortex_a57/config=0x11/ (0.00%) 24 context-switches (37.36%) 57589154 armv8_cortex_a53/config=0x11/ (37.36%) Here the 'a53' event group was always eligible to be scheduled, but the 'a57' group never eligible to be scheduled, as the task was always affine to a Cortex-A53 CPU. The SW (group leader) event in the 'a57' group was eligible, but the HW event failed at pmu::add() time, resulting in ctx_flexible_sched_in giving up on scheduling further groups with HW events. One way of avoiding this is to check pmu::filter_match() on siblings as well as the group leader. If any of these fail their pmu::filter_match() call, we must skip the entire group before attempting to add any events. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Fixes: 66eb579e66ec ("perf: allow for PMU-specific event filtering") Link: http://lkml.kernel.org/r/1465917041-15339-1-git-send-email-mark.rutland@arm.com [ Small readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-01bpf: generally move prog destruction to RCU deferralDaniel Borkmann
Jann Horn reported following analysis that could potentially result in a very hard to trigger (if not impossible) UAF race, to quote his event timeline: - Set up a process with threads T1, T2 and T3 - Let T1 set up a socket filter F1 that invokes another filter F2 through a BPF map [tail call] - Let T1 trigger the socket filter via a unix domain socket write, don't wait for completion - Let T2 call PERF_EVENT_IOC_SET_BPF with F2, don't wait for completion - Now T2 should be behind bpf_prog_get(), but before bpf_prog_put() - Let T3 close the file descriptor for F2, dropping the reference count of F2 to 2 - At this point, T1 should have looked up F2 from the map, but not finished executing it - Let T3 remove F2 from the BPF map, dropping the reference count of F2 to 1 - Now T2 should call bpf_prog_put() (wrong BPF program type), dropping the reference count of F2 to 0 and scheduling bpf_prog_free_deferred() via schedule_work() - At this point, the BPF program could be freed - BPF execution is still running in a freed BPF program While at PERF_EVENT_IOC_SET_BPF time it's only guaranteed that the perf event fd we're doing the syscall on doesn't disappear from underneath us for whole syscall time, it may not be the case for the bpf fd used as an argument only after we did the put. It needs to be a valid fd pointing to a BPF program at the time of the call to make the bpf_prog_get() and while T2 gets preempted, F2 must have dropped reference to 1 on the other CPU. The fput() from the close() in T3 should also add additionally delay to the reference drop via exit_task_work() when bpf_prog_release() gets called as well as scheduling bpf_prog_free_deferred(). That said, it makes nevertheless sense to move the BPF prog destruction generally after RCU grace period to guarantee that such scenario above, but also others as recently fixed in ceb56070359b ("bpf, perf: delay release of BPF prog after grace period") with regards to tail calls won't happen. Integrating bpf_prog_free_deferred() directly into the RCU callback is not allowed since the invocation might happen from either softirq or process context, so we're not permitted to block. Reviewing all bpf_prog_put() invocations from eBPF side (note, cBPF -> eBPF progs don't use this for their destruction) with call_rcu() look good to me. Since we don't know whether at the time of attaching the program, we're already part of a tail call map, we need to use RCU variant. However, due to this, there won't be severely more stress on the RCU callback queue: situations with above bpf_prog_get() and bpf_prog_put() combo in practice normally won't lead to releases, but even if they would, enough effort/ cycles have to be put into loading a BPF program into the kernel already. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "I've been traveling so this accumulates more than week or so of bug fixing. It perhaps looks a little worse than it really is. 1) Fix deadlock in ath10k driver, from Ben Greear. 2) Increase scan timeout in iwlwifi, from Luca Coelho. 3) Unbreak STP by properly reinjecting STP packets back into the stack. Regression fix from Ido Schimmel. 4) Mediatek driver fixes (missing malloc failure checks, leaking of scratch memory, wrong indexing when mapping TX buffers, etc.) from John Crispin. 5) Fix endianness bug in icmpv6_err() handler, from Hannes Frederic Sowa. 6) Fix hashing of flows in UDP in the ruseport case, from Xuemin Su. 7) Fix netlink notifications in ovs for tunnels, delete link messages are never emitted because of how the device registry state is handled. From Nicolas Dichtel. 8) Conntrack module leaks kmemcache on unload, from Florian Westphal. 9) Prevent endless jump loops in nft rules, from Liping Zhang and Pablo Neira Ayuso. 10) Not early enough spinlock initialization in mlx4, from Eric Dumazet. 11) Bind refcount leak in act_ipt, from Cong WANG. 12) Missing RCU locking in HTB scheduler, from Florian Westphal. 13) Several small MACSEC bug fixes from Sabrina Dubroca (missing RCU barrier, using heap for SG and IV, and erroneous use of async flag when allocating AEAD conext.) 14) RCU handling fix in TIPC, from Ying Xue. 15) Pass correct protocol down into ipv4_{update_pmtu,redirect}() in SIT driver, from Simon Horman. 16) Socket timer deadlock fix in TIPC from Jon Paul Maloy. 17) Fix potential deadlock in team enslave, from Ido Schimmel. 18) Memory leak in KCM procfs handling, from Jiri Slaby. 19) ESN generation fix in ipv4 ESP, from Herbert Xu. 20) Fix GFP_KERNEL allocations with locks held in act_ife, from Cong WANG. 21) Use after free in netem, from Eric Dumazet. 22) Uninitialized last assert time in multicast router code, from Tom Goff. 23) Skip raw sockets in sock_diag destruction broadcast, from Willem de Bruijn. 24) Fix link status reporting in thunderx, from Sunil Goutham. 25) Limit resegmentation of retransmit queue so that we do not retransmit too large GSO frames. From Eric Dumazet. 26) Delay bpf program release after grace period, from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (141 commits) openvswitch: fix conntrack netlink event delivery qed: Protect the doorbell BAR with the write barriers. neigh: Explicitly declare RCU-bh read side critical section in neigh_xmit() e1000e: keep VLAN interfaces functional after rxvlan off cfg80211: fix proto in ieee80211_data_to_8023 for frames without LLC header qlcnic: use the correct ring in qlcnic_83xx_process_rcv_ring_diag() bpf, perf: delay release of BPF prog after grace period net: bridge: fix vlan stats continue counter tcp: do not send too big packets at retransmit time ibmvnic: fix to use list_for_each_safe() when delete items net: thunderx: Fix TL4 configuration for secondary Qsets net: thunderx: Fix link status reporting net/mlx5e: Reorganize ethtool statistics net/mlx5e: Fix number of PFC counters reported to ethtool net/mlx5e: Prevent adding the same vxlan port net/mlx5e: Check for BlueFlame capability before allocating SQ uar net/mlx5e: Change enum to better reflect usage net/mlx5: Add ConnectX-5 PCIe 4.0 to list of supported devices net/mlx5: Update command strings net: marvell: Add separate config ANEG function for Marvell 88E1111 ...
2016-06-29bpf, perf: delay release of BPF prog after grace periodDaniel Borkmann
Commit dead9f29ddcc ("perf: Fix race in BPF program unregister") moved destruction of BPF program from free_event_rcu() callback to __free_event(), which is problematic if used with tail calls: if prog A is attached as trace event directly, but at the same time present in a tail call map used by another trace event program elsewhere, then we need to delay destruction via RCU grace period since it can still be in use by the program doing the tail call (the prog first needs to be dropped from the tail call map, then trace event with prog A attached destroyed, so we get immediate destruction). Fixes: dead9f29ddcc ("perf: Fix race in BPF program unregister") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Jann Horn <jann@thejh.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14Merge branch 'linus' into perf/core, to pick up fixes before merging new changesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-10Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A handful of tooling fixes, two PMU driver fixes and a cleanup of redundant code that addresses a security analyzer false positive" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Remove a redundant check perf/x86/intel/uncore: Remove SBOX support for Broadwell server perf ctf: Convert invalid chars in a string before set value perf record: Fix crash when kptr is restricted perf symbols: Check kptr_restrict for root perf/x86/intel/rapl: Fix pmus free during cleanup
2016-06-08perf/core: Remove a redundant checkAlexander Shishkin
There is no way to end up in _free_event() with event::pmu being NULL. The latter is initialized in event allocation path and remains set forever. In case of allocation failure, the error path doesn't use _free_event(). Having the check, however, suggests that it is possible to have a event::pmu==NULL situation in _free_event() and confuses the robots. This patch gets rid of the check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: eranian@google.com Cc: vince@deater.net Link: http://lkml.kernel.org/r/1465303455-26032-1-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08Merge branch 'linus' into perf/core, to refresh the branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-08perf/core: Fix crash due to account/unaccount_sb_event() inconsistencyDavid Carrillo-Cisneros
unaccount_pmu_sb_event() did not check for attributes in event->attr before calling detach_sb_event(), while account_pmu_event() did. This caused NULL pointer reference in cgroup events that did not have any of the attributes checked by account_pmu_event(). To trigger the bug just wait for a cgroup event to terminate, e.g.: $ mkdir /dev/cgroup/devices/test $ perf stat -e cycles -a -G test sleep 0 ... see crash ... Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Reviewed-by: Stephane Eranian <eranian@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zheng <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/1464809585-66072-1-git-send-email-davidcc@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-03perf/abi: Change the errno for sampling event not supported in hardwareVineet Gupta
Change the return code for sampling event not supported from -ENOTSUPP to -EOPNOTSUPP. This allows userspace to identify this case specifically, instead of printing the catch-all error message it did previously. Technically this is an ABI change, but we think we can get away with it. Old behavior: ------- | # perf record ls | Error: | The sys_perf_event_open() syscall returned with 524 (Unknown error 524) | for event (cycles:ppp). | /bin/dmesg may provide additional information. | No CONFIG_PERF_EVENTS=y kernel support configured? New behavior: ------- | # perf record ls | Error: | PMU Hardware doesn't support sampling/overflow-interrupts. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <acme@redhat.com> Cc: <linux-snps-arc@lists.infradead.org> Cc: <vincent.weaver@maine.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: http://lkml.kernel.org/r/1462786660-2900-3-git-send-email-vgupta@synopsys.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-03perf/core: Fix implicitly enable dynamic interrupt throttleKan Liang
This patch fixes an issue which was introduced by commit: 91a612eea9a3 ("perf/core: Fix dynamic interrupt throttle") ... which commit unconditionally sets the perf_sample_allowed_ns value to !0. But that could trigger a bug in the following corner case: The user can disable the dynamic interrupt throttle mechanism by setting perf_cpu_time_max_percent to 0. Then they change perf_event_max_sample_rate. For this case, the mechanism will be enabled implicitly, because perf_sample_allowed_ns becomes !0 - which is not what we want. This patch only updates perf_sample_allowed_ns when the dynamic interrupt throttle mechanism is enabled. Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Link: http://lkml.kernel.org/r/1462260366-3160-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>