summaryrefslogtreecommitdiff
path: root/kernel/printk/printk.c
AgeCommit message (Collapse)Author
2022-04-08printk: fix return value of printk.devkmsg __setup handlerRandy Dunlap
[ Upstream commit b665eae7a788c5e2bc10f9ac3c0137aa0ad1fc97 ] If an invalid option value is used with "printk.devkmsg=<value>", it is silently ignored. If a valid option value is used, it is honored but the wrong return value (0) is used, indicating that the command line option had an error and was not handled. This string is not added to init's environment strings due to init/main.c::unknown_bootoption() checking for a '.' in the boot option string and then considering that string to be an "Unused module parameter". Print a warning message if a bad option string is used. Always return 1 from the __setup handler to indicate that the command line option has been handled. Fixes: 750afe7babd1 ("printk: add kernel parameter to control writes to /dev/kmsg") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Ogness <john.ogness@linutronix.de> Reviewed-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220228220556.23484-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-12printk/console: Allow to disable console output by using console="" or ↵Petr Mladek
console=null commit 3cffa06aeef7ece30f6b5ac0ea51f264e8fea4d0 upstream. The commit 48021f98130880dd74 ("printk: handle blank console arguments passed in.") prevented crash caused by empty console= parameter value. Unfortunately, this value is widely used on Chromebooks to disable the console output. The above commit caused performance regression because the messages were pushed on slow console even though nobody was watching it. Use ttynull driver explicitly for console="" and console=null parameters. It has been created for exactly this purpose. It causes that preferred_console is set. As a result, ttySX and ttyX are not used as a fallback. And only ttynull console gets registered by default. It still allows to register other consoles either by additional console= parameters or SPCR. It prevents regression because it worked this way even before. Also it is a sane semantic. Preventing output on all consoles should be done another way, for example, by introducing mute_console parameter. Link: https://lore.kernel.org/r/20201006025935.GA597@jagdpanzerIV.localdomain Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20201111135450.11214-3-pmladek@suse.com Cc: Yi Fan <yfa@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-04printk: avoid prb_first_valid_seq() where possibleJohn Ogness
[ Upstream commit 13791c80b0cdf54d92fc54221cdf490683b109de ] If message sizes average larger than expected (more than 32 characters), the data_ring will wrap before the desc_ring. Once the data_ring wraps, it will start invalidating descriptors. These invalid descriptors hang around until they are eventually recycled when the desc_ring wraps. Readers do not care about invalid descriptors, but they still need to iterate past them. If the average message size is much larger than 32 characters, then there will be many invalid descriptors preceding the valid descriptors. The function prb_first_valid_seq() always begins at the oldest descriptor and searches for the first valid descriptor. This can be rather expensive for the above scenario. And, in fact, because of its heavy usage in /dev/kmsg, there have been reports of long delays and even RCU stalls. For code that does not need to search from the oldest record, replace prb_first_valid_seq() usage with prb_read_valid_*() functions, which provide a start sequence number to search from. Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer") Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: J. Avila <elavila@google.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210211173152.1629-1-john.ogness@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-30printk: fix string termination for record_print_text()John Ogness
commit 08d60e5999540110576e7c1346d486220751b7f9 upstream. Commit f0e386ee0c0b ("printk: fix buffer overflow potential for print_text()") added string termination in record_print_text(). However it used the wrong base pointer for adding the terminator. This led to a 0-byte being written somewhere beyond the buffer. Use the correct base pointer when adding the terminator. Fixes: f0e386ee0c0b ("printk: fix buffer overflow potential for print_text()") Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210124202728.4718-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30printk: fix buffer overflow potential for print_text()John Ogness
commit f0e386ee0c0b71ea6f7238506a4d0965a2dbef11 upstream. Before the commit 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer"), msg_print_text() would only write up to size-1 bytes into the provided buffer. Some callers expect this behavior and append a terminator to returned string. In particular: arch/powerpc/xmon/xmon.c:dump_log_buf() arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout() msg_print_text() has been replaced by record_print_text(), which currently fills the full size of the buffer. This causes a buffer overflow for the above callers. Change record_print_text() so that it will only use size-1 bytes for text data. Also, for paranoia sakes, add a terminator after the text data. And finally, document this behavior so that it is clear that only size-1 bytes are used and a terminator is added. Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer") Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210114170412.4819-1-john.ogness@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-27printk: fix kmsg_dump_get_buffer length calulationsJohn Ogness
[ Upstream commit 89ccf18f032f26946e2ea6258120472eec6aa745 ] kmsg_dump_get_buffer() uses @syslog to determine if the syslog prefix should be written to the buffer. However, when calculating the maximum number of records that can fit into the buffer, it always counts the bytes from the syslog prefix. Use @syslog when calculating the maximum number of records that can fit into the buffer. Fixes: e2ae715d66bf ("kmsg - kmsg_dump() use iterator to receive log buffer content") Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210113164413.1599-1-john.ogness@linutronix.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-27printk: finalize records with trailing newlinesJohn Ogness
Any record with a trailing newline (LOG_NEWLINE flag) cannot be continued because the newline has been stripped and will not be visible if the message is appended. This was already handled correctly when committing in log_output() but was not handled correctly when committing in log_store(). Fixes: f5f022e53b87 ("printk: reimplement log_cont using record extension") Link: https://lore.kernel.org/r/20201126114836.14750-1-john.ogness@linutronix.de Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-10-12Merge branch 'printk-rework' into for-linusPetr Mladek
2020-10-05printk: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace /* FALL THRU */ comment with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20201002224627.GA30475@embeddedor
2020-09-30printk: reduce setup_text_buf size to LOG_LINE_MAXJohn Ogness
@setup_text_buf only copies the original text messages (without any prefix or extended text). It only needs to be LOG_LINE_MAX in size. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200930090134.8723-3-john.ogness@linutronix.de
2020-09-30printk: avoid and/or handle record truncationJohn Ogness
If a reader provides a buffer that is smaller than the message text, the @text_len field of @info will have a value larger than the buffer size. If readers blindly read @text_len bytes of data without checking the size, they will read beyond their buffer. Add this check to record_print_text() to properly recognize when such truncation has occurred. Add a maximum size argument to the ringbuffer function to extend records so that records can not be created that are larger than the buffer size of readers. When extending records (LOG_CONT), do not extend records beyond LOG_LINE_MAX since that is the maximum size available in the buffers used by consoles and syslog. Fixes: f5f022e53b87 ("printk: reimplement log_cont using record extension") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200930090134.8723-2-john.ogness@linutronix.de
2020-09-22printk: remove dict ringJohn Ogness
Since there is no code that will ever store anything into the dict ring, remove it. If any future dictionary properties are to be added, these should be added to the struct printk_info. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200918223421.21621-4-john.ogness@linutronix.de
2020-09-22printk: move dictionary keys to dev_printk_infoJohn Ogness
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The current implementation stores the property names each time they are used. This requires more space than otherwise necessary. Also, because the dictionary entries are currently considered optional, it cannot be relied upon that they are always available, even if the writer wanted to store them. These issues will increase should new dictionary properties be introduced. Rather than storing the subsystem and device properties in the dict ring, introduce a struct dev_printk_info with separate fields to store only the property values. Embed this struct within the struct printk_info to provide guaranteed availability. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
2020-09-22printk: move printk_info into separate arrayJohn Ogness
The majority of the size of a descriptor is taken up by meta data, which is often not of interest to the ringbuffer (for example, when performing state checks). Since descriptors are often temporarily stored on the stack, keeping their size minimal will help reduce stack pressure. Rather than embedding the printk_info into the descriptor, create a separate printk_info array. The index of a descriptor in the descriptor array corresponds to the printk_info with the same index in the printk_info array. The rules for validity of a printk_info match the existing rules for the data blocks: the descriptor must be in a consistent state. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200918223421.21621-2-john.ogness@linutronix.de
2020-09-15printk: reimplement log_cont using record extensionJohn Ogness
Use the record extending feature of the ringbuffer to implement continuous messages. This preserves the existing continuous message behavior. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200914123354.832-7-john.ogness@linutronix.de
2020-09-15printk: ringbuffer: clear initial reserved fieldsJohn Ogness
prb_reserve() will set some meta data values and leave others uninitialized (or rather, containing the values of the previous wrap). Simplify the API by always clearing out all the fields. Only the sequence number is filled in. The caller is now responsible for filling in the rest of the meta data fields. In particular, for correctly filling in text and dict lengths. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200914123354.832-4-john.ogness@linutronix.de
2020-08-10kernel: printk: delete repeated words in commentsRandy Dunlap
Drop repeated words "the" in kernel/printk/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200807033227.8349-1-rdunlap@infradead.org
2020-08-04Merge tag 'printk-for-5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Herbert Xu made printk header file self-contained. - Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup() error handling. - Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf code. - Minor documentation updates. * tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: lib/vsprintf: Force type of flags value for gfp_t lib/vsprintf: Replace custom spec to print decimals with generic one lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert() printk: Make linux/printk.h self-contained doc:kmsg: explicitly state the return value in case of SEEK_CUR Replace HTTP links with HTTPS ones: vsprintf hvc: unify console setup naming console: Fix trivia typo 'change' -> 'chance' console: Propagate error code from console ->setup() tty: hvc: Return proper error code from console ->setup() hook serial: sunzilog: Return proper error code from console ->setup() hook serial: sunsab: Return proper error code from console ->setup() hook mips: Return proper error code from console ->setup() hook
2020-08-04Merge branch 'for-5.9-console-return-codes' into for-linusPetr Mladek
2020-07-13doc:kmsg: explicitly state the return value in case of SEEK_CURBruno Meneguele
The commit 625d3449788f ("Revert "kernel/printk: add kmsg SEEK_CUR handling"") reverted a change done to the return value in case a SEEK_CUR operation was performed for kmsg buffer based on the fact that different userspace apps were handling the new return value (-ESPIPE) in different ways, breaking them. At the same time -ESPIPE was the wrong decision because kmsg /does support/ seek() but doesn't follow the "normal" behavior userspace is used to. Because of that and also considering the time -EINVAL has been used, it was decided to keep this way to avoid more userspace breakage. This patch adds an official statement to the kmsg documentation pointing to the current return value for SEEK_CUR, -EINVAL, thus userspace libraries and apps can refer to it for a definitive guide on what to expect. Signed-off-by: Bruno Meneguele <bmeneg@redhat.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200710174423.10480-1-bmeneg@redhat.com
2020-07-10printk: use the lockless ringbufferJohn Ogness
Replace the existing ringbuffer usage and implementation with lockless ringbuffer usage. Even though the new ringbuffer does not require locking, all existing locking is left in place. Therefore, this change is purely replacing the underlining ringbuffer. Changes that exist due to the ringbuffer replacement: - The VMCOREINFO has been updated for the new structures. - Dictionary data is now stored in a separate data buffer from the human-readable messages. The dictionary data buffer is set to the same size as the message buffer. Therefore, the total required memory for both dictionary and message data is 2 * (2 ^ CONFIG_LOG_BUF_SHIFT) for the initial static buffers and 2 * log_buf_len (the kernel parameter) for the dynamic buffers. - Record meta-data is now stored in a separate array of descriptors. This is an additional 72 * (2 ^ (CONFIG_LOG_BUF_SHIFT - 5)) bytes for the static array and 72 * (log_buf_len >> 5) bytes for the dynamic array. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200709132344.760-5-john.ogness@linutronix.de
2020-07-10Revert "printk: lock/unlock console only for new logbuf entries"John Ogness
This reverts commit 3ac37a93fa9217e576bebfd4ba3e80edaaeb2289. This optimization will not apply once the transition to a lockless printk is complete. Rather than porting this optimization through the transition only to remove it anyway, just revert it now to simplify the transition. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200709132344.760-4-john.ogness@linutronix.de
2020-06-25console: Fix trivia typo 'change' -> 'chance'Andy Shevchenko
I bet the word 'chance' has to be used in 'had a chance to be called', but, alas, I'm not native speaker... Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200618164751.56828-7-andriy.shevchenko@linux.intel.com
2020-06-25console: Propagate error code from console ->setup()Andy Shevchenko
Since console ->setup() hook returns meaningful error codes, propagate it to the caller of try_enable_new_console(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200618164751.56828-6-andriy.shevchenko@linux.intel.com
2020-06-21Revert "kernel/printk: add kmsg SEEK_CUR handling"Jason A. Donenfeld
This reverts commit 8ece3b3eb576a78d2e67ad4c3a80a39fa6708809. This commit broke userspace. Bash uses ESPIPE to determine whether or not the file should be read using "unbuffered I/O", which means reading 1 byte at a time instead of 128 bytes at a time. I used to use bash to read through kmsg in a really quite nasty way: while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do echo "SARU $line" done < /dev/kmsg This will show all lines that can fit into the 128 byte buffer, and skip lines that don't. That's pretty awful, but at least it worked. With this change, bash now tries to do 1-byte reads, which means it skips all the lines, which is worse than before. Now, I don't really care very much about this, and I'm already look for a workaround. But I did just spend an hour trying to figure out why my scripts were broken. Either way, it makes no difference to me personally whether this is reverted, but it might be something to consider. If you declare that "trying to read /dev/kmsg with bash is terminally stupid anyway," I might be inclined to agree with you. But do note that bash uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's reading from a pipe. Cc: Bruno Meneguele <bmeneg@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Petr Mladek <pmladek@suse.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-12Merge tag 'printk-for-5.8-kdb-nmi' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fix from Petr Mladek: "One more printk change for 5.8: make sure that messages printed from KDB context are redirected to KDB console handlers. It did not work when KDB interrupted NMI or printk_safe contexts. Arm people started hitting this problem more often recently. I forgot to add the fix into the previous pull request by mistake" * tag 'printk-for-5.8-kdb-nmi' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk/kdb: Redirect printk messages into kdb in any context
2020-06-11printk/kdb: Redirect printk messages into kdb in any contextPetr Mladek
kdb has to get messages on consoles even when the system is stopped. It uses kdb_printf() internally and calls console drivers on its own. It uses a hack to reuse an existing code. It sets "kdb_trap_printk" global variable to redirect even the normal printk() into the kdb_printf() variant. The variable "kdb_trap_printk" is checked in printk_default() and it is ignored when printk is redirected to printk_safe in NMI context. Solve this by moving the check into printk_func(). It is obvious that it is not fully safe. But it does not make things worse. The console drivers are already called in this context by db_printf() direct calls. Reported-by: Sumit Garg <sumit.garg@linaro.org> Tested-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20200520102233.GC3464@linux-b0ei
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-06-01Merge tag 'printk-for-5.8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Benjamin Herrenschmidt solved a problem with non-matched console aliases by first checking consoles defined on the command line. It is a more conservative approach than the previous attempts. - Benjamin also made sure that the console accessible via /dev/console always has CON_CONSDEV flag. - Andy Shevchenko added the %ptT modifier for printing struct time64_t. It extends the existing %ptR handling for struct rtc_time. - Bruno Meneguele fixed /dev/kmsg error value returned by unsupported SEEK_CUR. - Tetsuo Handa removed unused pr_cont_once(). ... and a few small fixes. * tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Remove pr_cont_once() printk: handle blank console arguments passed in. kernel/printk: add kmsg SEEK_CUR handling printk: Fix a typo in comment "interator"->"iterator" usb: pulse8-cec: Switch to use %ptT ARM: bcm2835: Switch to use %ptT lib/vsprintf: Print time64_t in human readable format lib/vsprintf: update comment about simple_strto<foo>() functions printk: Correctly set CON_CONSDEV even when preferred console was not registered printk: Fix preferred console selection with multiple matches printk: Move console matching logic into a separate function printk: Convert a use of sprintf to snprintf in console_unlock
2020-06-01Merge branch 'for-5.8' into for-linusPetr Mladek
2020-06-01Merge branch 'for-5.7-preferred-console' into for-linusPetr Mladek
2020-05-30printk: Introduce kmsg_dump_reason_str()Kees Cook
The pstore subsystem already had a private version of this function. With the coming addition of the pstore/zone driver, this needs to be shared. As it really should live with printk, move it there instead. Link: https://lore.kernel.org/lkml/20200515184434.8470-4-keescook@chromium.org/ Acked-by: Petr Mladek <pmladek@suse.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-30printk: honor the max_reason field in kmsg_dumperPavel Tatashin
kmsg_dump() allows to dump kmesg buffer for various system events: oops, panic, reboot, etc. It provides an interface to register a callback call for clients, and in that callback interface there is a field "max_reason", but it was getting ignored when set to any "reason" higher than KMSG_DUMP_OOPS unless "always_kmsg_dump" was passed as kernel parameter. Allow clients to actually control their "max_reason", and keep the current behavior when "max_reason" is not set. Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Link: https://lore.kernel.org/lkml/20200515184434.8470-3-keescook@chromium.org/ Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2020-05-22printk: handle blank console arguments passed in.Shreyas Joshi
If uboot passes a blank string to console_setup then it results in a trashed memory. Ultimately, the kernel crashes during freeing up the memory. This fix checks if there is a blank parameter being passed to console_setup from uboot. In case it detects that the console parameter is blank then it doesn't setup the serial device and it gracefully exits. Link: https://lore.kernel.org/r/20200522065306.83-1-shreyas.joshi@biamp.com Signed-off-by: Shreyas Joshi <shreyas.joshi@biamp.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [pmladek@suse.com: Better format the commit message and code, remove unnecessary brackets.] Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-05-21kernel/printk: add kmsg SEEK_CUR handlingBruno Meneguele
Userspace libraries, e.g. glibc's dprintf(), perform a SEEK_CUR operation over any file descriptor requested to make sure the current position isn't pointing to junk due to previous manipulation of that same fd. And whenever that fd doesn't have support for such operation, the userspace code expects -ESPIPE to be returned. However, when the fd in question references the /dev/kmsg interface, the current kernel code state returns -EINVAL instead, causing an unexpected behavior in userspace: in the case of glibc, when -ESPIPE is returned it gets ignored and the call completes successfully, while returning -EINVAL forces dprintf to fail without performing any action over that fd: if (_IO_SEEKOFF (fp, (off64_t)0, _IO_seek_cur, _IOS_INPUT|_IOS_OUTPUT) == _IO_pos_BAD && errno != ESPIPE) return NULL; With this patch we make sure to return the correct value when SEEK_CUR is requested over kmsg and also add some kernel doc information to formalize this behavior. Link: https://lore.kernel.org/r/20200317103344.574277-1-bmeneg@redhat.com Cc: linux-kernel@vger.kernel.org Cc: rostedt@goodmis.org, Cc: David.Laight@ACULAB.COM Signed-off-by: Bruno Meneguele <bmeneg@redhat.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-05-21printk: Fix a typo in comment "interator"->"iterator"Ethon Paul
There is a typo in comment, fix it. Signed-off-by: Ethon Paul <ethp@qq.com> Cc: Steven Rostedt <rostedt@goodmis.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-04-27sysctl: pass kernel pointers to ->proc_handlerChristoph Hellwig
Instead of having all the sysctl handlers deal with user pointers, which is rather hairy in terms of the BPF interaction, copy the input to and from userspace in common code. This also means that the strings are always NUL-terminated by the common code, making the API a little bit safer. As most handler just pass through the data to one of the common handlers a lot of the changes are mechnical. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Andrey Ignatov <rdna@fb.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-04-10printk: queue wake_up_klogd irq_work only if per-CPU areas are readySergey Senozhatsky
printk_deferred(), similarly to printk_safe/printk_nmi, does not immediately attempt to print a new message on the consoles, avoiding calls into non-reentrant kernel paths, e.g. scheduler or timekeeping, which potentially can deadlock the system. Those printk() flavors, instead, rely on per-CPU flush irq_work to print messages from safer contexts. For same reasons (recursive scheduler or timekeeping calls) printk() uses per-CPU irq_work in order to wake up user space syslog/kmsg readers. However, only printk_safe/printk_nmi do make sure that per-CPU areas have been initialised and that it's safe to modify per-CPU irq_work. This means that, for instance, should printk_deferred() be invoked "too early", that is before per-CPU areas are initialised, printk_deferred() will perform illegal per-CPU access. Lech Perczak [0] reports that after commit 1b710b1b10ef ("char/random: silence a lockdep splat with printk()") user-space syslog/kmsg readers are not able to read new kernel messages. The reason is printk_deferred() being called too early (as was pointed out by Petr and John). Fix printk_deferred() and do not queue per-CPU irq_work before per-CPU areas are initialized. Link: https://lore.kernel.org/lkml/aa0732c6-5c4e-8a8b-a1c1-75ebe3dca05b@camlintechnologies.com/ Reported-by: Lech Perczak <l.perczak@camlintechnologies.com> Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Jann Horn <jannh@google.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Theodore Ts'o <tytso@mit.edu> Cc: John Ogness <john.ogness@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-02-18printk: Correctly set CON_CONSDEV even when preferred console was not registeredBenjamin Herrenschmidt
CON_CONSDEV flag was historically used to put/keep the preferred console first in console_drivers list. Where the preferred console is the last on the command line. The ordering is important only when opening /dev/console: + tty_kopen() + tty_lookup_driver() + console_device() The flag was originally an implementation detail. But it was later made accessible from userspace via /proc/consoles. It was used, for example, by the tool "showconsole" to show the real tty accessible via /dev/console, see https://github.com/bitstreamout/showconsole Now, the current code sets CON_CONSDEV only for the preferred console or when a fallback console is added. The flag is not set when the preferred console is defined on the command line but it is not registered from some reasons. Simple solution is to set CON_CONSDEV flag for the first registered console. It will work most of the time because: + Most real consoles have console->device defined. + Boot consoles are removed in printk_late_init(). + unregister_console() moves CON_CONSDEV flag to the next console. Clean solution would require checking con->device when the preferred console is registered and in unregister_console(). Conclusion: Use the simple solution for now. It is better than the current state and good enough. The clean solution is not worth it. It would complicate the already complicated code without too much gain. Instead the code would deserve a complete rewrite. Link: https://lore.kernel.org/r/20200213095133.23176-4-pmladek@suse.com Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [pmladek@suse.com: Correct reasoning in the commit message, comment update.] Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-02-18printk: Fix preferred console selection with multiple matchesBenjamin Herrenschmidt
In the following circumstances, the rule of selecting the console corresponding to the last "console=" entry on the command line as the preferred console (CON_CONSDEV, ie, /dev/console) fails. This is a specific example, but it could happen with different consoles that have a similar name aliasing mechanism. - The kernel command line has both console=tty0 and console=ttyS0 in that order (the latter with speed etc... arguments). This is common with some cloud setups such as Amazon Linux. - add_preferred_console is called early to register "uart0". In our case that happens from acpi_parse_spcr() on arm64 since the "enable_console" argument is true on that architecture. This causes "uart0" to become entry 0 of the console_cmdline array. Now, because of the above, what happens is: - add_preferred_console is called by the cmdline parsing for tty0 and ttyS0 respectively, thus occupying entries 1 and 2 of the console_cmdline array (since this happens after ACPI SPCR parsing). At that point preferred_console is set to 2 as expected. - When the tty layer kicks in, it will call register_console for tty0. This will match entry 1 in console_cmdline array. It isn't our preferred console but because it's our only console at this point, it will end up "first" in the consoles list. - When 8250 probes the actual serial port later on, it calls register_console for ttyS0. At that point the loop in register_console tries to match it with the entries in the console_cmdline array. Ideally this should match ttyS0 in entry 2, which is preferred, causing it to be inserted first and to replace tty0 as CONSDEV. However, 8250 provides a "match" hook in its struct console, and that hook will match "uart" as an alias to "ttyS". So we match uart0 at entry 0 in the array which is not the preferred console and will not match entry 2 which is since we break out of the loop on the first match. As a result, we don't set CONSDEV and don't insert it first, but second in the console list. As a result, we end up with tty0 remaining first in the array, and thus /dev/console going there instead of the last user specified one which is ttyS0. This tentative fix register_console() to scan first for consoles specified on the command line, and only if none is found, to then scan for consoles specified by the architecture. Link: https://lore.kernel.org/r/20200213095133.23176-3-pmladek@suse.com Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-02-18printk: Move console matching logic into a separate functionBenjamin Herrenschmidt
This moves the loop that tries to match a newly registered console with the command line or add_preferred_console list into a separate helper, in order to be able to call it multiple times in subsequent patches. Link: https://lore.kernel.org/r/20200213095133.23176-2-pmladek@suse.com Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-02-11printk: Convert a use of sprintf to snprintf in console_unlockNathan Chancellor
When CONFIG_PRINTK is disabled (e.g. when building allnoconfig), clang warns: ../kernel/printk/printk.c:2416:10: warning: 'sprintf' will always overflow; destination buffer has size 0, but format string expands to at least 33 [-Wfortify-source] len = sprintf(text, ^ 1 warning generated. It is not wrong; text has a zero size when CONFIG_PRINTK is disabled because LOG_LINE_MAX and PREFIX_MAX are both zero. Change to snprintf so that this case is explicitly handled without any risk of overflow. Link: https://github.com/ClangBuiltLinux/linux/issues/846 Link: https://github.com/llvm/llvm-project/commit/6d485ff455ea2b37fef9e06e426dae6c1241b231 Link: http://lkml.kernel.org/r/20200130221644.2273-1-natechancellor@gmail.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Cc: clang-built-linux@googlegroups.com Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-02-11console: Introduce ->exit() callbackAndy Shevchenko
Some consoles might require special operations on unregistering. For instance, serial console, when registered in the kernel, keeps power on for entire time, until it gets unregistered. Example of use: ->setup(console): pm_runtime_get(...); ->exit(console): pm_runtime_put(...); For such cases to have a balance we would provide ->exit() callback. Link: http://lkml.kernel.org/r/20200203133130.11591-7-andriy.shevchenko@linux.intel.com To: linux-kernel@vger.kernel.org To: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-02-11console: Don't notify user space when unregister non-listed consoleAndy Shevchenko
If console is not on the list then there is nothing for us to do and sysfs notify is pointless. Note, that nr_ext_console_drivers is being changed only for listed consoles. Suggested-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Link: http://lkml.kernel.org/r/20200203133130.11591-6-andriy.shevchenko@linux.intel.com To: linux-kernel@vger.kernel.org To: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-02-11console: Avoid positive return code from unregister_console()Andy Shevchenko
There are only two callers that use the returned code from unregister_console(): - unregister_early_console() in arch/m68k/kernel/early_printk.c - kgdb_unregister_nmi_console() in drivers/tty/serial/kgdb_nmi.c They both expect to get "0" on success and a non-zero value on error. But the current behavior is confusing and buggy: - _braille_unregister_console() returns "1" on success - unregister_console() returns "1" on error Fix and clean up the behavior: - Return success when _braille_unregister_console() succeeded - Return a meaningful error code when the console was not registered before Link: http://lkml.kernel.org/r/20200203133130.11591-5-andriy.shevchenko@linux.intel.com To: linux-kernel@vger.kernel.org To: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-02-11console: Drop misleading commentAndy Shevchenko
/* find the last or real console */ This comment is misleading. The purpose of the loop is to check if we are trying to register boot console after a real one has already been registered. This is already mentioned in a comment above. Link: http://lkml.kernel.org/r/20200203133130.11591-4-andriy.shevchenko@linux.intel.com To: linux-kernel@vger.kernel.org To: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> [pmladek@suse.com: Updated commit message.] Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-02-11console: Use for_each_console() helper in unregister_console()Andy Shevchenko
We have rather open coded single linked list manipulations where we may simple use for_each_console() helper with properly set exit conditions. Replace open coded single-linked list handling with for_each_console() helper in use. Link: http://lkml.kernel.org/r/20200203133130.11591-3-andriy.shevchenko@linux.intel.com To: linux-kernel@vger.kernel.org To: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-02-11console: Drop double check for console_drivers being non-NULLAndy Shevchenko
There is no need to explicitly check for console_drivers to be non-NULL since for_each_console() does this. Link: http://lkml.kernel.org/r/20200203133130.11591-2-andriy.shevchenko@linux.intel.com To: linux-kernel@vger.kernel.org To: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2020-01-02printk: fix exclusive_console replayingJohn Ogness
Commit f92b070f2dc8 ("printk: Do not miss new messages when replaying the log") introduced a new variable @exclusive_console_stop_seq to store when an exclusive console should stop printing. It should be set to the @console_seq value at registration. However, @console_seq is previously set to @syslog_seq so that the exclusive console knows where to begin. This results in the exclusive console immediately reactivating all the other consoles and thus repeating the messages for those consoles. Set @console_seq after @exclusive_console_stop_seq has stored the current @console_seq value. Fixes: f92b070f2dc8 ("printk: Do not miss new messages when replaying the log") Link: http://lkml.kernel.org/r/20191219115322.31160-1-john.ogness@linutronix.de Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: John Ogness <john.ogness@linutronix.de> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com>
2019-12-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Ingo Molnar: "Most of the IRQ subsystem changes in this cycle were irq-chip driver updates: - Qualcomm PDC wakeup interrupt support - Layerscape external IRQ support - Broadcom bcm7038 PM and wakeup support - Ingenic driver cleanup and modernization - GICv3 ITS preparation for GICv4.1 updates - GICv4 fixes There's also the series from Frederic Weisbecker that fixes memory ordering bugs for the irq-work logic, whose primary fix is to turn work->irq_work.flags into an atomic variable and then convert the complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a much simpler atomic_fetch_or() call. There are also various smaller cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs pinctrl/msm: Setup GPIO chip in hierarchy irqchip/qcom-pdc: Add irqchip set/get state calls irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask irqchip/qcom-pdc: Update max PDC interrupts of/irq: Document properties for wakeup interrupt parent genirq: Introduce irq_chip_get/set_parent_state calls irqdomain: Add bus token DOMAIN_BUS_WAKEUP genirq: Fix function documentation of __irq_alloc_descs() irq_work: Fix IRQ_WORK_BUSY bit clearing irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) irq_work: Slightly simplify IRQ_WORK_PENDING clearing irq_work: Fix irq_work_claim() memory ordering irq_work: Convert flags to atomic_t irqchip: Ingenic: Add process for more than one irq at the same time. irqchip: ingenic: Alloc generic chips from IRQ domain irqchip: ingenic: Get virq number from IRQ domain irqchip: ingenic: Error out if IRQ domain creation failed irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-07 15:56:46 +0000