| Age | Commit message (Collapse) | Author |
|---|
|
ctxt.2022.07.05a: Linux-kernel memory model development branch.
|
|
'poll.2022.07.21a', 'rcu-tasks.2022.06.21a' and 'torture.2022.06.21a' into HEAD
doc.2022.06.21a: Documentation updates.
fixes.2022.07.19a: Miscellaneous fixes.
nocb.2022.07.19a: Callback-offload updates.
poll.2022.07.21a: Polled grace-period updates.
rcu-tasks.2022.06.21a: Tasks RCU updates.
torture.2022.06.21a: Torture-test updates.
|
|
If a CPU has interrupts disabled continuously starting before the
beginning of a given expedited RCU grace period, that CPU will not
execute that grace period's IPI handler. This will in turn mean
that the ->cpu_no_qs.b.exp field in that CPU's rcu_data structure
will continue to contain the boolean value false.
Knowing whether or not a CPU has had interrupts disabled can be helpful
when debugging an expedited RCU CPU stall warning, so this commit
adds a "D" indicator expedited RCU CPU stall warnings that signifies
that the corresponding CPU has had interrupts disabled throughout.
This capability was tested as follows:
runqemu kvm slirp nographic qemuparams="-m 4096 -smp 4" bootparams=
"isolcpus=2,3 nohz_full=2,3 rcu_nocbs=2,3 rcutree.dump_tree=1
rcutorture.stall_cpu_holdoff=30 rcutorture.stall_cpu=40
rcutorture.stall_cpu_irqsoff=1 rcutorture.stall_cpu_block=0
rcutorture.stall_no_softlockup=1" -d
The rcu_torture_stall() function ran on CPU 1, which displays the "D"
as expected given the rcutorture.stall_cpu_irqsoff=1 module parameter:
............
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks:
{ 1-...D } 26467 jiffies s: 13317 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug): l=1:0-1:0x2/.
Task dump for CPU 1:
task:rcu_torture_sta state:R running task stack: 0 pid: 76 ppid: 2 flags:0x00004008
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit dumps out state when the sync_rcu_do_polled_gp() function
loops more than expected. This is a debugging aid.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
When a normal RCU CPU stall warning is encountered with the
panic_on_rcu_stall sysfs variable is set, the system panics only after
the stall warning is printed. But when an expedited RCU CPU stall
warning is encountered with the panic_on_rcu_stall sysfs variable is
set, the system panics first, thus never printing the stall warning.
This commit therefore brings the expedited stall warning into line with
the normal stall warning by printing first and panicking afterwards.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds tests of start_poll_synchronize_rcu_expedited() and
poll_state_synchronize_rcu_expedited().
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds expedited grace-period functionality to RCU's polled
grace-period API, adding start_poll_synchronize_rcu_expedited() and
cond_synchronize_rcu_expedited(), which are similar to the existing
start_poll_synchronize_rcu() and cond_synchronize_rcu() functions,
respectively.
Note that although start_poll_synchronize_rcu_expedited() can be invoked
very early, the resulting expedited grace periods are not guaranteed
to start until after workqueues are fully initialized. On the other
hand, both synchronize_rcu() and synchronize_rcu_expedited() can also
be invoked very early, and the resulting grace periods will be taken
into account as they occur.
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit causes rcu_torture_writer() to use WARN_ON_ONCE() to check
that the cookie returned by the current RCU flavor's ->get_gp_state()
function (get_state_synchronize_rcu() for vanilla RCU) causes that
flavor's ->poll_gp_state function (poll_state_synchronize_rcu() for
vanilla RCU) to unconditionally return true.
Note that a pair calls to synchronous grace-period-wait functions are
used. This is necessary to account for partially overlapping normal and
expedited grace periods aligning in just the wrong way with polled API
invocations, which can cause those polled API invocations to ignore one or
the other of those partially overlapping grace periods. It is unlikely
that this sort of ignored grace period will be a problem in production,
but rcutorture can make it happen quite within a few tens of seconds.
This commit is in preparation for polled expedited grace periods.
[ paulmck: Apply feedback from Frederic Weisbecker. ]
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit makes the Tiny RCU implementation of synchronize_rcu()
increment the rcu_ctrlblk.gp_seq counter, thus making both
synchronize_rcu() and synchronize_rcu_expedited() visible to
get_state_synchronize_rcu() and friends.
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, this code could splat:
oldstate = get_state_synchronize_rcu();
synchronize_rcu_expedited();
WARN_ON_ONCE(!poll_state_synchronize_rcu(oldstate));
This situation is counter-intuitive and user-unfriendly. After all, there
really was a perfectly valid full grace period right after the call to
get_state_synchronize_rcu(), so why shouldn't poll_state_synchronize_rcu()
know about it?
This commit therefore makes the polled grace-period API aware of expedited
grace periods in addition to the normal grace periods that it is already
aware of. With this change, the above code is guaranteed not to splat.
Please note that the above code can still splat due to counter wrap on the
one hand and situations involving partially overlapping normal/expedited
grace periods on the other. On 64-bit systems, the second is of course
much more likely than the first. It is possible to modify this approach
to prevent overlapping grace periods from causing splats, but only at
the expense of greatly increasing the probability of counter wrap, as
in within milliseconds on 32-bit systems and within minutes on 64-bit
systems.
This commit is in preparation for polled expedited grace periods.
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit switches the existing polled grace-period APIs to use a
new ->gp_seq_polled counter in the rcu_state structure. An additional
->gp_seq_polled_snap counter in that same structure allows the normal
grace period kthread to interact properly with the !SMP !PREEMPT fastpath
through synchronize_rcu(). The first of the two to note the end of a
given grace period will make knowledge of this transition available to
the polled API.
This commit is in preparation for polled expedited grace periods.
[ paulmck: Fix use of rcu_state.gp_seq_polled to start normal grace period. ]
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Currently, if the 'rcu_nocb_poll' kernel boot parameter is enabled, all
rcuog kthreads enter polling mode. However, if all of a given group
of rcuo kthreads correspond to CPUs that have been de-offloaded, the
corresponding rcuog kthread will nonetheless still wake up periodically,
unnecessarily consuming power and perturbing workloads. Fortunately,
this situation is easily detected by the fact that the rcuog kthread's
CPU's rcu_data structure's ->nocb_head_rdp list is empty.
This commit saves power and avoids unnecessarily perturbing workloads
by putting an rcuog kthread to sleep during any time period when all of
its rcuo kthreads' CPUs are de-offloaded.
Co-developed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
This commit introduces a RCU_NOCB_CPU_CB_BOOST Kconfig option that
prevents rcuo kthreads from running at real-time priority, even in
kernels built with RCU_BOOST. This capability is important to devices
needing low-latency (as in a few milliseconds) response from expedited
RCU grace periods, but which are not running a classic real-time workload.
On such devices, permitting the rcuo kthreads to run at real-time priority
results in unacceptable latencies imposed on the application tasks,
which run as SCHED_OTHER.
See for example the following trace output:
<snip>
<...>-60 [006] d..1 2979.028717: rcu_batch_start: rcu_preempt CBs=34619 bl=270
<snip>
If that rcuop kthread were permitted to run at real-time SCHED_FIFO
priority, it would monopolize its CPU for hundreds of milliseconds
while invoking those 34619 RCU callback functions, which would cause an
unacceptably long latency spike for many application stacks on Android
platforms.
However, some existing real-time workloads require that callback
invocation run at SCHED_FIFO priority, for example, those running on
systems with heavy SCHED_OTHER background loads. (It is the real-time
system's administrator's responsibility to make sure that important
real-time tasks run at a higher priority than do RCU's kthreads.)
Therefore, this new RCU_NOCB_CPU_CB_BOOST Kconfig option defaults to
"y" on kernels built with PREEMPT_RT and defaults to "n" otherwise.
The effect is to preserve current behavior for real-time systems, but for
other systems to allow expedited RCU grace periods to run with real-time
priority while continuing to invoke RCU callbacks as SCHED_OTHER.
As you would expect, this RCU_NOCB_CPU_CB_BOOST Kconfig option has no
effect except on CPUs with offloaded RCU callbacks.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
Callbacks are invoked in RCU kthreads when calbacks are offloaded
(rcu_nocbs boot parameter) or when RCU's softirq handler has been
offloaded to rcuc kthreads (use_softirq==0). The current code allows
for the rcu_nocbs case but not the use_softirq case. This commit adds
support for the use_softirq case.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
Systems built with CONFIG_RCU_NOCB_CPU=y but booted without either
the rcu_nocbs= or rcu_nohz_full= kernel-boot parameters will not have
callback offloading on any of the CPUs, nor can any of the CPUs be
switched to enable callback offloading at runtime. Although this is
intentional, it would be nice to have a way to offload all the CPUs
without having to make random bootloaders specify either the rcu_nocbs=
or the rcu_nohz_full= kernel-boot parameters.
This commit therefore provides a new CONFIG_RCU_NOCB_CPU_DEFAULT_ALL
Kconfig option that switches the default so as to offload callback
processing on all of the CPUs. This default can still be overridden
using the rcu_nocbs= and rcu_nohz_full= kernel-boot parameters.
Reviewed-by: Kalesh Singh <kaleshsingh@google.com>
Reviewed-by: Uladzislau Rezki <urezki@gmail.com>
(In v4.1, fixed issues with CONFIG maze reported by kernel test robot).
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
direct call
If the rcuog/o[p] kthreads spawn failed, the offloaded rdp needs to
be explicitly deoffloaded, otherwise the target rdp is still considered
offloaded even though nothing actually handles the callbacks.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
In case of failure to spawn either rcuog or rcuo[p] kthreads for a given
rdp, rcu_nocb_rdp_deoffload() needs to be called with the hotplug
lock and the barrier_mutex held. However cpus write lock is already held
while calling rcutree_prepare_cpu(). It's not possible to call
rcu_nocb_rdp_deoffload() from there with just locking the barrier_mutex
or this would result in a locking inversion against
rcu_nocb_cpu_deoffload() which holds both locks in the reverse order.
Simply solve this with inverting the locking order inside
rcu_nocb_cpu_[de]offload(). This will be a pre-requisite to toggle NOCB
states toward cpusets anyway.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
NOCB rdp's are part of a group whose list is iterated by the
corresponding rdp leader.
This list is RCU traversed because an rdp can be either added or
deleted concurrently. Upon addition, a new iteration to the list after
a synchronization point (a pair of LOCK/UNLOCK ->nocb_gp_lock) is forced
to make sure:
1) we didn't miss a new element added in the middle of an iteration
2) we didn't ignore a whole subset of the list due to an element being
quickly deleted and then re-added.
3) we prevent from probably other surprises...
Although this layout is expected to be safe, it doesn't help anybody
to sleep well.
Simplify instead the nocb state toggling with moving the list
modification from the nocb (de-)offloading workqueue to the rcuog
kthreads instead.
Whenever the rdp leader is expected to (re-)set the SEGCBLIST_KTHREAD_GP
flag of a target rdp, the latter is queued so that the leader handles
the flag flip along with adding or deleting the target rdp to the list
to iterate. This way the list modification and iteration happen from the
same kthread and those operations can't race altogether.
As a bonus, the flags for each rdp don't need to be checked locklessly
before each iteration, which is one less opportunity to produce
nightmares.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
Add a comment to explain why !rcu_preempt_blocked_readers_cgp() condition
is required on root rnp node, for GP completion check in rcu_gp_fqs_loop().
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit saves a line of code by initializing the rcu_gp_fqs()
function's first_gp_fqs local variable in its declaration.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Reported-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
monitor_todo is not needed as the work struct already tracks
if work is pending. Just use that to know if work is pending
using schedule_delayed_work() helper.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
When a CPU is slow to provide a quiescent state for a given grace
period, RCU takes steps to encourage that CPU to get with the
quiescent-state program in a more timely fashion. These steps
include these flags in the rcu_data structure:
1. ->rcu_urgent_qs, which causes the scheduling-clock interrupt to
request an otherwise pointless context switch from the scheduler.
2. ->rcu_need_heavy_qs, which causes both cond_resched() and RCU's
context-switch hook to do an immediate momentary quiscent state.
3. ->rcu_need_heavy_qs, which causes the scheduler-clock tick to
be enabled even on nohz_full CPUs with only one runnable task.
These flags are of course cleared once the corresponding CPU has passed
through a quiescent state. Unless that quiescent state is the CPU
going offline, which means that when the CPU comes back online, it will
needlessly consume additional CPU time and incur additional latency,
which constitutes a minor but very real performance bug.
This commit therefore adds the call to rcu_disable_urgency_upon_qs()
that clears these flags to the CPU-hotplug offlining code path.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
When running KASAN with Tiny RCU (e.g. under ARCH=um, where
a working KASAN patch is now available), we don't get any
information on the original kfree_rcu() (or similar) caller
when a problem is reported, as Tiny RCU doesn't record this.
Add the recording, which required pulling kvfree_call_rcu()
out of line for the KASAN case since the recording function
(kasan_record_aux_stack_noalloc) is neither exported, nor
can we include kasan.h into rcutiny.h.
without KASAN, the patch has no size impact (ARCH=um kernel):
text data bss dec hex filename
6151515 4423154 33148520 43723189 29b29b5 linux
6151515 4423154 33148520 43723189 29b29b5 linux + patch
with KASAN, the impact on my build was minimal:
text data bss dec hex filename
13915539 7388050 33282304 54585893 340ea25 linux
13911266 7392114 33282304 54585684 340e954 linux + patch
-4273 +4064 +-0 -209
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The purpose of commit 282d8998e997 ("srcu: Prevent expedited GPs
and blocking readers from consuming CPU") was to prevent a long
series of never-blocking expedited SRCU grace periods from blocking
kernel-live-patching (KLP) progress. Although it was successful, it also
resulted in excessive boot times on certain embedded workloads running
under qemu with the "-bios QEMU_EFI.fd" command line. Here "excessive"
means increasing the boot time up into the three-to-four minute range.
This increase in boot time was due to the more than 6000 back-to-back
invocations of synchronize_rcu_expedited() within the KVM host OS, which
in turn resulted from qemu's emulation of a long series of MMIO accesses.
Commit 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace
periods") did not significantly help this particular use case.
Zhangfei Gao and Shameerali Kolothum Thodi did experiments varying the
value of SRCU_MAX_NODELAY_PHASE with HZ=250 and with various values
of non-sleeping per phase counts on a system with preemption enabled,
and observed the following boot times:
+──────────────────────────+────────────────+
| SRCU_MAX_NODELAY_PHASE | Boot time (s) |
+──────────────────────────+────────────────+
| 100 | 30.053 |
| 150 | 25.151 |
| 200 | 20.704 |
| 250 | 15.748 |
| 500 | 11.401 |
| 1000 | 11.443 |
| 10000 | 11.258 |
| 1000000 | 11.154 |
+──────────────────────────+────────────────+
Analysis on the experiment results show additional improvements with
CPU-bound delays approaching one jiffy in duration. This improvement was
also seen when number of per-phase iterations were scaled to one jiffy.
This commit therefore scales per-grace-period phase number of non-sleeping
polls so that non-sleeping polls extend for about one jiffy. In addition,
the delay-calculation call to srcu_get_delay() in srcu_gp_end() is
replaced with a simple check for an expedited grace period. This change
schedules callback invocation immediately after expedited grace periods
complete, which results in greatly improved boot times. Testing done
by Marc and Zhangfei confirms that this change recovers most of the
performance degradation in boottime; for CONFIG_HZ_250 configuration,
specifically, boot times improve from 3m50s to 41s on Marc's setup;
and from 2m40s to ~9.7s on Zhangfei's setup.
In addition to the changes to default per phase delays, this
change adds 3 new kernel parameters - srcutree.srcu_max_nodelay,
srcutree.srcu_max_nodelay_phase, and srcutree.srcu_retry_check_delay.
This allows users to configure the srcu grace period scanning delays in
order to more quickly react to additional use cases.
Fixes: 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace periods")
Fixes: 282d8998e997 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU")
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reported-by: yueluck <yueluck@163.com>
Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The RCU_STRICT_GRACE_PERIOD Kconfig option does nothing in kernels
built with CONFIG_TINY_RCU=y, so this commit adjusts the dependencies
to disallow this combination.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
Commit 282d8998e997 ("srcu: Prevent expedited GPs and blocking readers
from consuming CPU") fixed a problem where a long-running expedited SRCU
grace period could block kernel live patching. It did so by giving up
on expediting once a given SRCU expedited grace period grew too old.
Unfortunately, this added excessive delays to boots of virtual embedded
systems specifying "-bios QEMU_EFI.fd" to qemu. This commit therefore
makes the transition away from expediting less aggressive, increasing
the per-grace-period phase number of non-sleeping polls of readers from
one to three and increasing the required grace-period age from one jiffy
(actually from zero to one jiffies) to two jiffies (actually from one
to two jiffies).
Fixes: 282d8998e997 ("srcu: Prevent expedited GPs and blocking readers from consuming CPU")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reported-by: chenxiang (M)" <chenxiang66@hisilicon.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
|
|
The intent of the CONFIG_RCU_STRICT_GRACE_PERIOD Konfig option is to
cause normal grace periods to complete quickly in order to better catch
errors resulting from improperly leaking pointers from RCU read-side
critical sections. However, kernels built with this option enabled still
wait for some hundreds of milliseconds before boosting RCU readers that
have been preempted within their current critical section. The value
of this delay is set by the CONFIG_RCU_BOOST_DELAY Kconfig option,
which defaults to 500 milliseconds.
This commit therefore causes kernels build with strict grace periods
to ignore CONFIG_RCU_BOOST_DELAY. This causes rcu_initiate_boost()
to start boosting immediately after all CPUs on a given leaf rcu_node
structure have passed through their quiescent states.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
Currently, the rcu_node structure's ->cbovlmask field is set in call_rcu()
when a given CPU is suffering from callback overload. But if that CPU
goes offline, the outgoing CPU's callbacks is migrated to the running
CPU, which is likely to overload the running CPU. However, that CPU's
bit in its leaf rcu_node structure's ->cbovlmask field remains zero.
Initially, this is OK because the outgoing CPU's bit remains set.
However, that bit will be cleared at the next end of a grace period,
at which time it is quite possible that the running CPU will still
be overloaded. If the running CPU invokes call_rcu(), then overload
will be checked for and the bit will be set. Except that there is no
guarantee that the running CPU will invoke call_rcu(), in which case the
next grace period will fail to take the running CPU's overload condition
into account. Plus, because the bit is not set, the end of the grace
period won't check for overload on this CPU.
This commit therefore adds a call to check_cb_ovld_locked() in
rcutree_migrate_callbacks() to set the running CPU's ->cbovlmask bit
appropriately.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
Stop-machine recently started calling additional functions while waiting:
----------------------------------------------------------------
Former stop machine wait loop:
do {
cpu_relax(); => macro
...
} while (curstate != STOPMACHINE_EXIT);
-----------------------------------------------------------------
Current stop machine wait loop:
do {
stop_machine_yield(cpumask); => function (notraced)
...
touch_nmi_watchdog(); => function (notraced, inside calls also notraced)
...
rcu_momentary_dyntick_idle(); => function (notraced, inside calls traced)
} while (curstate != MULTI_STOP_EXIT);
------------------------------------------------------------------
These functions (and the functions that they call) must be marked
notrace to prevent them from being updated while they are executing.
The consequences of failing to mark these functions can be severe:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: 1-...!: (0 ticks this GP) idle=14f/1/0x4000000000000000 softirq=3397/3397 fqs=0
rcu: 3-...!: (0 ticks this GP) idle=ee9/1/0x4000000000000000 softirq=5168/5168 fqs=0
(detected by 0, t=8137 jiffies, g=5889, q=2 ncpus=4)
Task dump for CPU 1:
task:migration/1 state:R running task stack: 0 pid: 19 ppid: 2 flags:0x00000000
Stopper: multi_cpu_stop+0x0/0x18c <- stop_machine_cpuslocked+0x128/0x174
Call Trace:
Task dump for CPU 3:
task:migration/3 state:R running task stack: 0 pid: 29 ppid: 2 flags:0x00000000
Stopper: multi_cpu_stop+0x0/0x18c <- stop_machine_cpuslocked+0x128/0x174
Call Trace:
rcu: rcu_preempt kthread timer wakeup didn't happen for 8136 jiffies! g5889 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: Possible timer handling issue on cpu=2 timer-softirq=594
rcu: rcu_preempt kthread starved for 8137 jiffies! g5889 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=2
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack: 0 pid: 14 ppid: 2 flags:0x00000000
Call Trace:
schedule+0x56/0xc2
schedule_timeout+0x82/0x184
rcu_gp_fqs_loop+0x19a/0x318
rcu_gp_kthread+0x11a/0x140
kthread+0xee/0x118
ret_from_exception+0x0/0x14
rcu: Stack dump where RCU GP kthread last ran:
Task dump for CPU 2:
task:migration/2 state:R running task stack: 0 pid: 24 ppid: 2 flags:0x00000000
Stopper: multi_cpu_stop+0x0/0x18c <- stop_machine_cpuslocked+0x128/0x174
Call Trace:
This commit therefore marks these functions notrace:
rcu_preempt_deferred_qs()
rcu_preempt_need_deferred_qs()
rcu_preempt_deferred_qs_irqrestore()
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
The force-quiesce-state loop function rcu_gp_fqs_loop() checks for
callback overloading and does an immediate initial scan for idle CPUs
if so. However, subsequent rescans will be carried out at as leisurely a
rate as they always are, as specified by the rcutree.jiffies_till_next_fqs
module parameter. It might be tempting to just continue immediately
rescanning, but this turns the RCU grace-period kthread into a CPU hog.
It might also be tempting to reduce the time between rescans to a single
jiffy, but this can be problematic on larger systems.
This commit therefore divides the normal time between rescans by three,
rounding up. Thus a small system running at HZ=1000 that is suffering
from callback overload will wait only one jiffy instead of the normal
three between rescans.
[ paulmck: Apply Neeraj Upadhyay feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
|
|
Context tracking's state and dynticks counter are going to be merged
in a single field so that both updates can happen atomically and at the
same time. Prepare for that with converting the state into an atomic_t.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
Move the core RCU eqs/dynticks functions to context tracking so that
we can later merge all that code within context tracking.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
To prepare for migrating the RCU eqs accounting code to context tracking,
split the last-resort deferred nocb resched from rcu_user_enter() and
move it into a separate call from context tracking.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
The RCU eqs tracking is going to be performed by the context tracking
subsystem. The related nesting counters thus need to be moved to the
context tracking structure.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
The RCU eqs tracking is going to be performed by the context tracking
subsystem. The related nesting counters thus need to be moved to the
context tracking structure.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
In order to prepare for merging RCU dynticks counter into the context
tracking state, move the rcu_data's dynticks field to the context
tracking structure. It will later be mixed within the context tracking
state itself.
[ paulmck: Move enum ctx_state into global scope. ]
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
Now rcu_irq_enter/exit() is an unnecessary middle call between
ct_irq_enter/exit() and nmi_irq_enter/exit(). Take this opportunity
to remove the former functions and move the comments above them to the
new entrypoints.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
The RCU dynticks counter is going to be merged into the context tracking
subsystem. Start with moving the idle extended quiescent states
entrypoints to context tracking. For now those are dumb redirections to
existing RCU calls.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Uladzislau Rezki <uladzislau.rezki@sony.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicolas Saenz Julienne <nsaenz@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Paul Gortmaker<paul.gortmaker@windriver.com>
Cc: Alex Belits <abelits@marvell.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Tested-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
|
|
Currently shrinkers are anonymous objects. For debugging purposes they
can be identified by count/scan function names, but it's not always
useful: e.g. for superblock's shrinkers it's nice to have at least an
idea of to which superblock the shrinker belongs.
This commit adds names to shrinkers. register_shrinker() and
prealloc_shrinker() functions are extended to take a format and arguments
to master a name.
In some cases it's not possible to determine a good name at the time when
a shrinker is allocated. For such cases shrinker_debugfs_rename() is
provided.
The expected format is:
<subsystem>-<shrinker_type>[:<instance>]-<id>
For some shrinkers an instance can be encoded as (MAJOR:MINOR) pair.
After this change the shrinker debugfs directory looks like:
$ cd /sys/kernel/debug/shrinker/
$ ls
dquota-cache-16 sb-devpts-28 sb-proc-47 sb-tmpfs-42
mm-shadow-18 sb-devtmpfs-5 sb-proc-48 sb-tmpfs-43
mm-zspool:zram0-34 sb-hugetlbfs-17 sb-pstore-31 sb-tmpfs-44
rcu-kfree-0 sb-hugetlbfs-33 sb-rootfs-2 sb-tmpfs-49
sb-aio-20 sb-iomem-12 sb-securityfs-6 sb-tracefs-13
sb-anon_inodefs-15 sb-mqueue-21 sb-selinuxfs-22 sb-xfs:vda1-36
sb-bdev-3 sb-nsfs-4 sb-sockfs-8 sb-zsmalloc-19
sb-bpf-32 sb-pipefs-14 sb-sysfs-26 thp-deferred_split-10
sb-btrfs:vda2-24 sb-proc-25 sb-tmpfs-1 thp-zero-9
sb-cgroup2-30 sb-proc-39 sb-tmpfs-27 xfs-buf:vda1-37
sb-configfs-23 sb-proc-41 sb-tmpfs-29 xfs-inodegc:vda1-38
sb-dax-11 sb-proc-45 sb-tmpfs-35
sb-debugfs-7 sb-proc-46 sb-tmpfs-40
[roman.gushchin@linux.dev: fix build warnings]
Link: https://lkml.kernel.org/r/Yr+ZTnLb9lJk6fJO@castle
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/20220601032227.4076670-4-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The ANDROID config symbol is only used to guard the binder config
symbol and to inject completely random config changes. Remove it
as it is obviously a bad idea.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220629150102.1582425-2-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
This reverts commit 2bb2b7b57f81255c13f4395ea911d6bdc70c9fe2.
The testing of 5.19 release candidates revealed missing synchronization
between early and regular console functionality.
It would be possible to start the console kthreads later as a workaround.
But it is clear that console lock serialized console drivers between
each other. It opens a big area of possible problems that were not
considered by people involved in the development and review.
printk() is crucial for debugging kernel issues and console output is
very important part of it. The number of consoles is huge and a proper
review would take some time. As a result it need to be reverted for 5.19.
Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com
|
|
In kernels built with CONFIG_PREEMPT_RT=y, spinlocks are replaced by
rt_mutex, which can sleep. This means that acquiring a non-raw spinlock
in a critical section where preemption is disabled can trigger the
following BUG:
BUG: scheduling while atomic: ref_scale_reade/76/0x00000002
Preemption disabled at:
ref_lock_section+0x16/0x80
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x82
dump_stack+0x10/0x12
__schedule_bug.cold+0x9c/0xad
__schedule+0x839/0xc00
schedule_rtlock+0x22/0x40
rtlock_slowlock_locked+0x460/0x1350
rt_spin_lock+0x61/0xe0
ref_lock_section+0x29/0x80
rcu_scale_one_reader+0x52/0x60
ref_scale_reader+0x28d/0x490
kthread+0x128/0x150
ret_from_fork+0x22/0x30
</TASK>
This commit therefore converts spinlock to raw_spinlock.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit adds warnings for allocation failure during the mem_dump_obj()
tests. It also terminates these tests upon such failure.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The RCU priority boosting can fail in two situations:
1) If (nr_cpus= > maxcpus=), which means if the total number of CPUs
is higher than those brought online at boot, then torture_onoff() may
later bring up CPUs that weren't online on boot. Now since rcutorture
initialization only boosts the ksoftirqds of the CPUs that have been
set online on boot, the CPUs later set online by torture_onoff won't
benefit from the boost, making RCU priority boosting fail.
2) The ksoftirqd kthreads are boosted after the creation of
rcu_torture_boost() kthreads, which opens a window large enough for these
rcu_torture_boost() kthreads to wait (despite running at FIFO priority)
for ksoftirqds that are still running at SCHED_NORMAL priority.
The issues can trigger for example with:
./kvm.sh --configs TREE01 --kconfig "CONFIG_RCU_BOOST=y"
[ 34.968561] rcu-torture: !!!
[ 34.968627] ------------[ cut here ]------------
[ 35.014054] WARNING: CPU: 4 PID: 114 at kernel/rcu/rcutorture.c:1979 rcu_torture_stats_print+0x5ad/0x610
[ 35.052043] Modules linked in:
[ 35.069138] CPU: 4 PID: 114 Comm: rcu_torture_sta Not tainted 5.18.0-rc1 #1
[ 35.096424] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
[ 35.154570] RIP: 0010:rcu_torture_stats_print+0x5ad/0x610
[ 35.198527] Code: 63 1b 02 00 74 02 0f 0b 48 83 3d 35 63 1b 02 00 74 02 0f 0b 48 83 3d 21 63 1b 02 00 74 02 0f 0b 48 83 3d 0d 63 1b 02 00 74 02 <0f> 0b 83 eb 01 0f 8e ba fc ff ff 0f 0b e9 b3 fc ff f82
[ 37.251049] RSP: 0000:ffffa92a0050bdf8 EFLAGS: 00010202
[ 37.277320] rcu: De-offloading 8
[ 37.290367] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001
[ 37.290387] RDX: 0000000000000000 RSI: 00000000ffffbfff RDI: 00000000ffffffff
[ 37.290398] RBP: 000000000000007b R08: 0000000000000000 R09: c0000000ffffbfff
[ 37.290407] R10: 000000000000002a R11: ffffa92a0050bc18 R12: ffffa92a0050be20
[ 37.290417] R13: ffffa92a0050be78 R14: 0000000000000000 R15: 000000000001bea0
[ 37.290427] FS: 0000000000000000(0000) GS:ffff96045eb00000(0000) knlGS:0000000000000000
[ 37.290448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 37.290460] CR2: 0000000000000000 CR3: 000000001dc0c000 CR4: 00000000000006e0
[ 37.290470] Call Trace:
[ 37.295049] <TASK>
[ 37.295065] ? preempt_count_add+0x63/0x90
[ 37.295095] ? _raw_spin_lock_irqsave+0x12/0x40
[ 37.295125] ? rcu_torture_stats_print+0x610/0x610
[ 37.295143] rcu_torture_stats+0x29/0x70
[ 37.295160] kthread+0xe3/0x110
[ 37.295176] ? kthread_complete_and_exit+0x20/0x20
[ 37.295193] ret_from_fork+0x22/0x30
[ 37.295218] </TASK>
Fix this with boosting the ksoftirqds kthreads from the boosting
hotplug callback itself and before the boosting kthreads are created.
Fixes: ea6d962e80b6 ("rcutorture: Judge RCU priority boosting on grace periods, not callbacks")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Systems built with CONFIG_DEBUG_PREEMPT=y can trigger the following
BUG while running the rcuscale performance test:
BUG: using smp_processor_id() in preemptible [00000000] code: rcu_scale_write/69
CPU: 0 PID: 66 Comm: rcu_scale_write Not tainted 5.18.0-rc7-next-20220517-yoctodev-standard+
caller is debug_smp_processor_id+0x17/0x20
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x5e
dump_stack+0x10/0x12
check_preemption_disabled+0xdf/0xf0
debug_smp_processor_id+0x17/0x20
rcu_scale_writer+0x2b5/0x580
kthread+0x177/0x1b0
ret_from_fork+0x22/0x30
</TASK>
Reproduction method:
runqemu kvm slirp nographic qemuparams="-m 4096 -smp 8" bootparams="isolcpus=2,3
nohz_full=2,3 rcu_nocbs=2,3 rcutree.dump_tree=1 rcuscale.shutdown=false
rcuscale.gp_async=true" -d
The problem is that the rcu_scale_writer() kthreads fail to set the
PF_NO_SETAFFINITY flags, which causes is_percpu_thread() to assume
that the kthread's affinity might change at any time, thus the BUG
noted above.
This commit therefore causes rcu_scale_writer() to set PF_NO_SETAFFINITY
in its kthread's ->flags field, thus preventing this BUG.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The loop scanning the pipesummary[] array currently skips the last
element, which means that the diagnostics ignore those rarest of
situations, namely where some readers persist across more than ten
grace periods, but all other readers avoid spanning a full grace period.
This commit therefore adjusts the scan to include the last element of
this array.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The kernel memory leak detector located the following:
unreferenced object 0xffff95d941135b50 (size 16):
comm "swapper/0", pid 1, jiffies 4294667610 (age 1367.451s)
hex dump (first 16 bytes):
f0 c6 c2 bd d9 95 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000bc81d9b1>] kmem_cache_alloc_trace+0x2f6/0x500
[<00000000d28be229>] rcu_torture_init+0x1235/0x1354
[<0000000032c3acd9>] do_one_initcall+0x51/0x210
[<000000003c117727>] kernel_init_freeable+0x205/0x259
[<000000003961f965>] kernel_init+0x1a/0x120
[<000000001998f890>] ret_from_fork+0x22/0x30
This is caused by the rcu_test_debug_objects() function allocating an
rcu_head structure, then failing to free it. This commit therefore adds
the needed kfree() after the last use of this structure.
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The existing loop has an implicit manual loop that obscures the flow
and requires an extra control variable. This commit makes this implicit
loop explicit, thus saving several lines of code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Dumping a big ftrace buffer could lead to a RCU stall. So there is the
ftrace buffer and the stall information which needs to be printed. When
there is additionally a WARN_ON() which describes the reason for the ftrace
buffer dump and the WARN_ON() is executed _after_ ftrace buffer dump, the
information get lost in the middle of the RCU stall information.
Therefore print WARN_ON() message before dumping the ftrace buffer in
rcu_torture_writer().
[ paulmck: Add tracing_off() to avoid cruft from WARN(). ]
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
