| Age | Commit message (Collapse) | Author |
|---|
|
commit 8646e53633f314e4d746a988240d3b951a92f94a upstream.
Invoke rseq's NOTIFY_RESUME handler when processing the flag prior to
transferring to a KVM guest, which is roughly equivalent to an exit to
userspace and processes many of the same pending actions. While the task
cannot be in an rseq critical section as the KVM path is reachable only
by via ioctl(KVM_RUN), the side effects that apply to rseq outside of a
critical section still apply, e.g. the current CPU needs to be updated if
the task is migrated.
Clearing TIF_NOTIFY_RESUME without informing rseq can lead to segfaults
and other badness in userspace VMMs that use rseq in combination with KVM,
e.g. due to the CPU ID being stale after task migration.
Fixes: 72c3c0fe54a3 ("x86/kvm: Use generic xfer to guest work function")
Reported-by: Peter Foley <pefoley@google.com>
Bisected-by: Doug Evans <dje@google.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210901203030.1292304-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9848417926353daa59d2b05eb26e185063dbac6e ]
The intel powerclamp driver will setup a per-CPU worker with RT
priority. The worker will then invoke play_idle() in which it remains in
the idle poll loop until it is stopped by the timer it started earlier.
That timer needs to expire in hard interrupt context on PREEMPT_RT.
Otherwise the timer will expire in ksoftirqd as a SOFT timer but that task
won't be scheduled on the CPU because its priority is lower than the
priority of the worker which is in the idle loop.
Always expire the idle timer in hard interrupt context.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210906113034.jgfxrjdvxnjqgtmc@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cfd799837dbc48499abb05d1891b3d9992354d3a ]
Since the commit e5efaeb8a8f5 ("bootconfig: Support mixing
a value and subkeys under a key") allows to co-exist a value
node and key nodes under a node, xbc_node_for_each_child()
is not only returning key node but also a value node.
In the boot-time tracing using xbc_node_for_each_child() to
iterate the events, groups and instances, but those must be
key nodes. Thus it must use xbc_node_for_each_subkey().
Link: https://lkml.kernel.org/r/163112988361.74896.2267026262061819145.stgit@devnote2
Fixes: e5efaeb8a8f5 ("bootconfig: Support mixing a value and subkeys under a key")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 2d186afd04d669fe9c48b994c41a7405a3c9f16d upstream.
Syzbot reported shift-out-of-bounds bug in profile_init().
The problem was in incorrect prof_shift. Since prof_shift value comes from
userspace we need to clamp this value into [0, BITS_PER_LONG -1]
boundaries.
Second possible shiht-out-of-bounds was found by Tetsuo:
sample_step local variable in read_profile() had "unsigned int" type,
but prof_shift allows to make a BITS_PER_LONG shift. So, to prevent
possible shiht-out-of-bounds sample_step type was changed to
"unsigned long".
Also, "unsigned short int" will be sufficient for storing
[0, BITS_PER_LONG] value, that's why there is no need for
"unsigned long" prof_shift.
Link: https://lkml.kernel.org/r/20210813140022.5011-1-paskripkin@gmail.com
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+e68c89a9510c159d9684@syzkaller.appspotmail.com
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1fbbd073137a9d63279f6bf363151a938347640 upstream.
Keno Fischer reported that when a binray loaded via ld-linux-x the
prctl(PR_SET_MM_MAP) doesn't allow to setup brk value because it lays
before mm:end_data.
For example a test program shows
| # ~/t
|
| start_code 401000
| end_code 401a15
| start_stack 7ffce4577dd0
| start_data 403e10
| end_data 40408c
| start_brk b5b000
| sbrk(0) b5b000
and when executed via ld-linux
| # /lib64/ld-linux-x86-64.so.2 ~/t
|
| start_code 7fc25b0a4000
| end_code 7fc25b0c4524
| start_stack 7fffcc6b2400
| start_data 7fc25b0ce4c0
| end_data 7fc25b0cff98
| start_brk 55555710c000
| sbrk(0) 55555710c000
This of course prevent criu from restoring such programs. Looking into
how kernel operates with brk/start_brk inside brk() syscall I don't see
any problem if we allow to setup brk/start_brk without checking for
end_data. Even if someone pass some weird address here on a purpose then
the worst possible result will be an unexpected unmapping of existing vma
(own vma, since prctl works with the callers memory) but test for
RLIMIT_DATA is still valid and a user won't be able to gain more memory in
case of expanding VMAs via new values shipped with prctl call.
Link: https://lkml.kernel.org/r/20210121221207.GB2174@grain
Fixes: bbdc6076d2e5 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reported-by: Keno Fischer <keno@juliacomputing.com>
Acked-by: Andrey Vagin <avagin@gmail.com>
Tested-by: Andrey Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6fe7c745f2acb73e4cc961d7f91125eef5a8861f ]
Fixes a build error when CONFIG_HIST_TRIGGERS=n with boot-time
tracing. Since the trigger_process_regex() is defined only
when CONFIG_HIST_TRIGGERS=y, if it is disabled, the 'actions'
event option also must be disabled.
Link: https://lkml.kernel.org/r/162856123376.203126.582144262622247352.stgit@devnote2
Fixes: 81a59555ff15 ("tracing/boot: Add per-event settings")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e242060c6a4947e8ae7d29794af6a581db08841 ]
Since kprobe_events and uprobe_events only check whether the
other same-type probe event has the same name or not, if the
user gives the same name of the existing tracepoint event (or
the other type of probe events), it silently fails to create
the tracefs entry (but registered.) as below.
/sys/kernel/tracing # ls events/task/task_rename
enable filter format hist id trigger
/sys/kernel/tracing # echo p:task/task_rename vfs_read >> kprobe_events
[ 113.048508] Could not create tracefs 'task_rename' directory
/sys/kernel/tracing # cat kprobe_events
p:task/task_rename vfs_read
To fix this issue, check whether the existing events have the
same name or not in trace_probe_register_event_call(). If exists,
it rejects to register the new event.
Link: https://lkml.kernel.org/r/162936876189.187130.17558311387542061930.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b89a05b21f46150ac10a962aa50109250b56b03b upstream.
In perf_event_addr_filters_apply, the task associated with
the event (event->ctx->task) is read using READ_ONCE at the beginning
of the function, checked, and then re-read from event->ctx->task,
voiding all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the task struct throughout the
function.
Fixes: 375637bc52495 ("perf/core: Introduce address range filtering")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210906015310.12802-1-baptiste.lepers@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4b6b08f2e45edda4c067ac40833e3c1f84383c0b upstream.
When start_kthread() return error, the cpus_read_unlock() need
to be called.
Link: https://lkml.kernel.org/r/20210831022919.27630-1-qiang.zhang@windriver.com
Cc: <stable@vger.kernel.org>
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Qiang.Zhang <qiang.zhang@windriver.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fab827dbee8c2e06ca4ba000fa6c48bcf9054aba upstream.
Commit 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
enabled memcg accounting for pids allocated from init_pid_ns.pid_cachep,
but forgot to adjust the setting for nested pid namespaces. As a result,
pid memory is not accounted exactly where it is really needed, inside
memcg-limited containers with their own pid namespaces.
Pid was one the first kernel objects enabled for memcg accounting.
init_pid_ns.pid_cachep marked by SLAB_ACCOUNT and we can expect that any
new pids in the system are memcg-accounted.
Though recently I've noticed that it is wrong. nested pid namespaces
creates own slab caches for pid objects, nested pids have increased size
because contain id both for all parent and for own pid namespaces. The
problem is that these slab caches are _NOT_ marked by SLAB_ACCOUNT, as a
result any pids allocated in nested pid namespaces are not
memcg-accounted.
Pid struct in nested pid namespace consumes up to 500 bytes memory, 100000
such objects gives us up to ~50Mb unaccounted memory, this allow container
to exceed assigned memcg limits.
Link: https://lkml.kernel.org/r/8b6de616-fd1a-02c6-cbdb-976ecdcfa604@virtuozzo.com
Fixes: 5d097056c9a0 ("kmemcg: account certain kmem allocations to memcg")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 13db8c50477d83ad3e3b9b0ae247e5cd833a7ae4 upstream.
After fork, the child process will get incorrect (2x) hugetlb_usage. If
a process uses 5 2MB hugetlb pages in an anonymous mapping,
HugetlbPages: 10240 kB
and then forks, the child will show,
HugetlbPages: 20480 kB
The reason for double the amount is because hugetlb_usage will be copied
from the parent and then increased when we copy page tables from parent
to child. Child will have 2x actual usage.
Fix this by adding hugetlb_count_init in mm_init.
Link: https://lkml.kernel.org/r/20210826071742.877-1-liuzixian4@huawei.com
Fixes: 5d317b2b6536 ("mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status")
Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
console_unlock()
commit 11e4b63abbe23872b45f325a7c6c8b7f9ff42cad upstream.
The standard printk() tries to flush the message to the console
immediately. It tries to take the console lock. If the lock is
already taken then the current owner is responsible for flushing
even the new message.
There is a small race window between checking whether a new message is
available and releasing the console lock. It is solved by re-checking
the state after releasing the console lock. If the check is positive
then console_unlock() tries to take the lock again and process the new
message as well.
The commit 996e966640ddea7b535c ("printk: remove logbuf_lock") causes that
console_seq is not longer read atomically. As a result, the re-check might
be done with an inconsistent 64-bit index.
Solve it by using the last sequence number that has been checked under
the console lock. In the worst case, it will take the lock again only
to realized that the new message has already been proceed. But it
was possible even before.
The variable next_seq is marked as __maybe_unused to call down compiler
warning when CONFIG_PRINTK is not defined.
Fixes: commit 996e966640ddea7b535c ("printk: remove logbuf_lock")
Reported-by: kernel test robot <lkp@intel.com> # unused next_seq warning
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20210702150657.26760-1-pmladek@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b41cda03765580caf7723b8c1b672d191c71013f ]
RT mutexes belong to the LD_WAIT_SLEEP class. Make them so.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210815211302.031014562@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f728c4a9e8405caae69d4bc1232c54ff57b5d20f ]
In error handling branch "if (WARN_ON(node == NUMA_NO_NODE))", the
previously allocated memories are not released. Doing this before
allocating memory eliminates memory leaks.
tj: Note that the condition only occurs when the arch code is pretty broken
and the WARN_ON might as well be BUG_ON().
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fed31a4dd3adb5455df7c704de2abb639a1dc1c0 ]
This commit fixes several typos where CONFIG_TASKS_RCU_TRACE should
instead be CONFIG_TASKS_TRACE_RCU. Among other things, these typos
could cause CONFIG_TASKS_TRACE_RCU_READ_MB=y kernels to suffer from
memory-ordering bugs that could result in false-positive quiescent
states and too-short grace periods.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 173735c346c412d9f084825ecb04f24ada0e2986 ]
Due to link order, dma_debug_init is called before debugfs has a chance
to initialize (via debugfs_init which also happens in the core initcall
stage), so the directories for dma-debug are never created.
Decouple dma_debug_fs_init from dma_debug_init and defer its init until
core_initcall_sync (after debugfs has been initialized) while letting
dma-debug initialization occur as soon as possible to catch any early
mappings, as suggested in [1].
[1] https://lore.kernel.org/linux-iommu/YIgGa6yF%2Fadg8OSN@kroah.com/
Fixes: 15b28bbcd567 ("dma-debug: move initialization to common code")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 868ad33bfa3bf39960982682ad3a0f8ebda1656e upstream.
sched_setscheduler() and rt_mutex_setprio() invoke the run-queue balance
callback after changing priorities or the scheduling class of a task. The
run-queue for which the callback is invoked can be local or remote.
That's not a problem for the regular rq::push_work which is serialized with
a busy flag in the run-queue struct, but for the balance_push() work which
is only valid to be invoked on the outgoing CPU that's wrong. It not only
triggers the debug warning, but also leaves the per CPU variable push_work
unprotected, which can result in double enqueues on the stop machine list.
Remove the warning and validate that the function is invoked on the
outgoing CPU.
Fixes: ae7927023243 ("sched: Optimize finish_lock_switch()")
Reported-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87zgt1hdw7.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 564005805aadec9cb7e5dc4e14071b8f87cd6b58 which is
commit 406dd42bd1ba0c01babf9cde169bb319e52f6147 upstream.
It is reported to cause regressions. A proposed fix has been posted,
but it is not in a released kernel yet. So just revert this from the
stable release so that the bug is fixed. If it's really needed we can
add it back in in a future release.
Link: https://lore.kernel.org/r/87ilz1pwaq.fsf@wylie.me.uk
Reported-by: "Alan J. Wylie" <alan@wylie.me.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d7af7e497f0308bc97809cc48b58e8e0f13887e1 ]
Fix a verifier bug found by smatch static checker in [0].
This problem has never been seen in prod to my best knowledge. Fixing it
still seems to be a good idea since it's hard to say for sure whether
it's possible or not to have a scenario where a combination of
convert_ctx_access() and a narrow load would lead to an out of bound
write.
When narrow load is handled, one or two new instructions are added to
insn_buf array, but before it was only checked that
cnt >= ARRAY_SIZE(insn_buf)
And it's safe to add a new instruction to insn_buf[cnt++] only once. The
second try will lead to out of bound write. And this is what can happen
if `shift` is set.
Fix it by making sure that if the BPF_RSH instruction has to be added in
addition to BPF_AND then there is enough space for two more instructions
in insn_buf.
The full report [0] is below:
kernel/bpf/verifier.c:12304 convert_ctx_accesses() warn: offset 'cnt' incremented past end of array
kernel/bpf/verifier.c:12311 convert_ctx_accesses() warn: offset 'cnt' incremented past end of array
kernel/bpf/verifier.c
12282
12283 insn->off = off & ~(size_default - 1);
12284 insn->code = BPF_LDX | BPF_MEM | size_code;
12285 }
12286
12287 target_size = 0;
12288 cnt = convert_ctx_access(type, insn, insn_buf, env->prog,
12289 &target_size);
12290 if (cnt == 0 || cnt >= ARRAY_SIZE(insn_buf) ||
^^^^^^^^^^^^^^^^^^^^^^^^^^^
Bounds check.
12291 (ctx_field_size && !target_size)) {
12292 verbose(env, "bpf verifier is misconfigured\n");
12293 return -EINVAL;
12294 }
12295
12296 if (is_narrower_load && size < target_size) {
12297 u8 shift = bpf_ctx_narrow_access_offset(
12298 off, size, size_default) * 8;
12299 if (ctx_field_size <= 4) {
12300 if (shift)
12301 insn_buf[cnt++] = BPF_ALU32_IMM(BPF_RSH,
^^^^^
increment beyond end of array
12302 insn->dst_reg,
12303 shift);
--> 12304 insn_buf[cnt++] = BPF_ALU32_IMM(BPF_AND, insn->dst_reg,
^^^^^
out of bounds write
12305 (1 << size * 8) - 1);
12306 } else {
12307 if (shift)
12308 insn_buf[cnt++] = BPF_ALU64_IMM(BPF_RSH,
12309 insn->dst_reg,
12310 shift);
12311 insn_buf[cnt++] = BPF_ALU64_IMM(BPF_AND, insn->dst_reg,
^^^^^^^^^^^^^^^
Same.
12312 (1ULL << size * 8) - 1);
12313 }
12314 }
12315
12316 new_prog = bpf_patch_insn_data(env, i + delta, insn_buf, cnt);
12317 if (!new_prog)
12318 return -ENOMEM;
12319
12320 delta += cnt - 1;
12321
12322 /* keep walking new program and skip insns we just inserted */
12323 env->prog = new_prog;
12324 insn = new_prog->insnsi + i + delta;
12325 }
12326
12327 return 0;
12328 }
[0] https://lore.kernel.org/bpf/20210817050843.GA21456@kili/
v1->v2:
- clarify that problem was only seen by static checker but not in prod;
Fixes: 46f53a65d2de ("bpf: Allow narrow loads with offset > 0")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210820163935.1902398-1-rdna@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b2f6662ac08d0e7c25574ce53623c71bdae9dd78 ]
Invoking atomic_notifier_chain_notify() requires acquiring a spinlock_t,
which can block under CONFIG_PREEMPT_RT. Notifications for members of the
cpu_pm notification chain will be issued by the idle task, which can never
block.
Making *all* atomic_notifiers use a raw_spinlock is too big of a hammer, as
only notifications issued by the idle task are problematic.
Special-case cpu_pm_notifier_chain by kludging a raw_notifier and
raw_spinlock_t together, matching the atomic_notifier behavior with a
raw_spinlock_t.
Fixes: 70d932985757 ("notifier: Fix broken error handling pattern")
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6ba34d3c73674e46d9e126e4f0cee79e5ef2481c ]
The cpuset fields that manage partition root state do not strictly
follow the cpuset locking rule that update to cpuset has to be done
with both the callback_lock and cpuset_mutex held. This is now fixed
by making sure that the locking rule is upheld.
Fixes: 3881b86128d0 ("cpuset: Add an error state to cpuset.sched.partition")
Fixes: 4b842da276a8 ("cpuset: Make CPU hotplug work with partition")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f3adb8a1e5f36e792598c1d77a2cfac9c90a4f9 ]
Use more descriptive variable names for update_prstate(), remove
unnecessary code and fix some typos. There is no functional change.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7fcc17d0cb12938d2b3507973a6f93fc9ed2c7a1 ]
The Energy Model (EM) provides useful information about device power in
each performance state to other subsystems like: Energy Aware Scheduler
(EAS). The energy calculation in EAS does arithmetic operation based on
the EM em_cpu_energy(). Current implementation of that function uses
em_perf_state::cost as a pre-computed cost coefficient equal to:
cost = power * max_frequency / frequency.
The 'power' is expressed in milli-Watts (or in abstract scale).
There are corner cases when the EAS energy calculation for two Performance
Domains (PDs) return the same value. The EAS compares these values to
choose smaller one. It might happen that this values are equal due to
rounding error. In such scenario, we need better resolution, e.g. 1000
times better. To provide this possibility increase the resolution in the
em_perf_state::cost for 64-bit architectures. The cost of increasing
resolution on 32-bit is pretty high (64-bit division) and is not justified
since there are no new 32bit big.LITTLE EAS systems expected which would
benefit from this higher resolution.
This patch allows to avoid the rounding to milli-Watt errors, which might
occur in EAS energy estimation for each PD. The rounding error is common
for small tasks which have small utilization value.
There are two places in the code where it makes a difference:
1. In the find_energy_efficient_cpu() where we are searching for
best_delta. We might suffer there when two PDs return the same result,
like in the example below.
Scenario:
Low utilized system e.g. ~200 sum_util for PD0 and ~220 for PD1. There
are quite a few small tasks ~10-15 util. These tasks would suffer for
the rounding error. These utilization values are typical when running games
on Android. One of our partners has reported 5..10mA less battery drain
when running with increased resolution.
Some details:
We have two PDs: PD0 (big) and PD1 (little)
Let's compare w/o patch set ('old') and w/ patch set ('new')
We are comparing energy w/ task and w/o task placed in the PDs
a) 'old' w/o patch set, PD0
task_util = 13
cost = 480
sum_util_w/o_task = 215
sum_util_w_task = 228
scale_cpu = 1024
energy_w/o_task = 480 * 215 / 1024 = 100.78 => 100
energy_w_task = 480 * 228 / 1024 = 106.87 => 106
energy_diff = 106 - 100 = 6
(this is equal to 'old' PD1's energy_diff in 'c)')
b) 'new' w/ patch set, PD0
task_util = 13
cost = 480 * 1000 = 480000
sum_util_w/o_task = 215
sum_util_w_task = 228
energy_w/o_task = 480000 * 215 / 1024 = 100781
energy_w_task = 480000 * 228 / 1024 = 106875
energy_diff = 106875 - 100781 = 6094
(this is not equal to 'new' PD1's energy_diff in 'd)')
c) 'old' w/o patch set, PD1
task_util = 13
cost = 160
sum_util_w/o_task = 283
sum_util_w_task = 293
scale_cpu = 355
energy_w/o_task = 160 * 283 / 355 = 127.55 => 127
energy_w_task = 160 * 296 / 355 = 133.41 => 133
energy_diff = 133 - 127 = 6
(this is equal to 'old' PD0's energy_diff in 'a)')
d) 'new' w/ patch set, PD1
task_util = 13
cost = 160 * 1000 = 160000
sum_util_w/o_task = 283
sum_util_w_task = 293
scale_cpu = 355
energy_w/o_task = 160000 * 283 / 355 = 127549
energy_w_task = 160000 * 296 / 355 = 133408
energy_diff = 133408 - 127549 = 5859
(this is not equal to 'new' PD0's energy_diff in 'b)')
2. Difference in the 6% energy margin filter at the end of
find_energy_efficient_cpu(). With this patch the margin comparison also
has better resolution, so it's possible to have better task placement
thanks to that.
Fixes: 27871f7a8a341ef ("PM: Introduce an Energy Model management framework")
Reported-by: CCJ Yeh <CCj.Yeh@mediatek.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15d428e6fe77fffc3f4fff923336036f5496ef17 ]
In cpuset_hotplug_workfn(), the detection of whether the cpu list
has been changed is done by comparing the effective cpus of the top
cpuset with the cpu_active_mask. However, in the rare case that just
all the CPUs in the subparts_cpus are offlined, the detection fails
and the partition states are not updated correctly. Fix it by forcing
the cpus_updated flag to true in this particular case.
Fixes: 4b842da276a8 ("cpuset: Make CPU hotplug work with partition")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 75f0fc7b48ad45a2e5736bcf8de26c8872fe8695 ]
In bpf_patch_insn_data(), we first use the bpf_patch_insn_single() to
insert new instructions, then use adjust_insn_aux_data() to adjust
insn_aux_data. If the old env->prog have no enough room for new inserted
instructions, we use bpf_prog_realloc to construct new_prog and free the
old env->prog.
There have two errors here. First, if adjust_insn_aux_data() return
ENOMEM, we should free the new_prog. Second, if adjust_insn_aux_data()
return ENOMEM, bpf_patch_insn_data() will return NULL, and env->prog has
been freed in bpf_prog_realloc, but we will use it in bpf_check().
So in this patch, we make the adjust_insn_aux_data() never fails. In
bpf_patch_insn_data(), we first pre-malloc memory for the new
insn_aux_data, then call bpf_patch_insn_single() to insert new
instructions, at last call adjust_insn_aux_data() to adjust
insn_aux_data.
Fixes: 8041902dae52 ("bpf: adjust insn_aux_data when patching insns")
Signed-off-by: He Fengqing <hefengqing@huawei.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210714101815.164322-1-hefengqing@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 290fdc4b7ef14e33d0e30058042b0e9bfd02b89b ]
Return a negative error code from the error handling case instead of 0, as
done elsewhere in this function.
Fixes: f52da98d900e ("genirq/timings: Add selftest for irqs circular buffer")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210811093333.2376-1-thunder.leizhen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dc87740c8a6806bd2162bfb441770e4e53be5601 ]
If rcu_print_task_stall() is invoked on an rcu_node structure that does
not contain any tasks blocking the current grace period, it takes an
early exit that fails to release that rcu_node structure's lock. This
results in a self-deadlock, which is detected by lockdep.
To reproduce this bug:
tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 3 --trust-make --configs "TREE03" --kconfig "CONFIG_PROVE_LOCKING=y" --bootargs "rcutorture.stall_cpu=30 rcutorture.stall_cpu_block=1 rcutorture.fwd_progress=0 rcutorture.test_boost=0"
This will also result in other complaints, including RCU's scheduler
hook complaining about blocking rather than preemption and an rcutorture
writer stall.
Only a partial RCU CPU stall warning message will be printed because of
the self-deadlock.
This commit therefore releases the lock on the rcu_print_task_stall()
function's early exit path.
Fixes: c583bcb8f5ed ("rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled")
Tested-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6a901a44f76878ed1653626c9ff4cfc5a3f58f8 ]
The for loop in rcu_print_task_stall() always omits ts[0], which points
to the first task blocking the stalled grace period. This in turn fails
to count this first task, which means that ndetected will be equal to
zero when all CPUs have passed through their quiescent states and only
one task is blocking the stalled grace period. This zero value for
ndetected will in turn result in an incorrect "All QSes seen" message:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: Tasks blocked on level-1 rcu_node (CPUs 12-23):
(detected by 15, t=6504 jiffies, g=164777, q=9011209)
rcu: All QSes seen, last rcu_preempt kthread activity 1 (4295252379-4295252378), jiffies_till_next_fqs=1, root ->qsmask 0x2
BUG: sleeping function called from invalid context at include/linux/uaccess.h:156
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 70613, name: msgstress04
INFO: lockdep is turned off.
Preemption disabled at:
[<ffff8000104031a4>] create_object.isra.0+0x204/0x4b0
CPU: 15 PID: 70613 Comm: msgstress04 Kdump: loaded Not tainted
5.12.2-yoctodev-standard #1
Hardware name: Marvell OcteonTX CN96XX board (DT)
Call trace:
dump_backtrace+0x0/0x2cc
show_stack+0x24/0x30
dump_stack+0x110/0x188
___might_sleep+0x214/0x2d0
__might_sleep+0x7c/0xe0
This commit therefore fixes the loop to include ts[0].
Fixes: c583bcb8f5ed ("rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled")
Tested-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca4984a7dd863f3e1c0df775ae3e744bff24c303 ]
The UCLAMP_FLAG_IDLE flag is set on a runqueue when dequeueing the last
uclamp active task (that is, when buckets.tasks reaches 0 for all
buckets) to maintain the last uclamp.max and prevent blocked util from
suddenly becoming visible.
However, there is an asymmetry in how the flag is set and cleared which
can lead to having the flag set whilst there are active tasks on the rq.
Specifically, the flag is cleared in the uclamp_rq_inc() path, which is
called at enqueue time, but set in uclamp_rq_dec_id() which is called
both when dequeueing a task _and_ in the update_uclamp_active() path. As
a result, when both uclamp_rq_{dec,ind}_id() are called from
update_uclamp_active(), the flag ends up being set but not cleared,
hence leaving the runqueue in a broken state.
Fix this by clearing the flag in update_uclamp_active() as well.
Fixes: e496187da710 ("sched/uclamp: Enforce last task's UCLAMP_MAX")
Reported-by: Rick Yiu <rickyiu@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qais Yousef <qais.yousef@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20210805102154.590709-2-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1c6829cfd3d5124b125e6df41158665aea413b35 ]
Use the loop variable instead of the function argument to test the
other SMT siblings for idle.
Fixes: ff7db0bf24db ("sched/numa: Prefer using an idle CPU as a migration target instead of comparing tasks")
Signed-off-by: Mika Penttilä <mika.penttila@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Link: https://lkml.kernel.org/r/20210722063946.28951-1-mika.penttila@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
sched_debug_init()
[ Upstream commit 459b09b5a3254008b63382bf41a9b36d0b590f57 ]
Since CPU capacity asymmetry can stem purely from maximum frequency
differences (e.g. Pixel 1), a rebuild of the scheduler topology can be
issued upon loading cpufreq, see:
arch_topology.c::init_cpu_capacity_callback()
Turns out that if this rebuild happens *before* sched_debug_init() is
run (which is a late initcall), we end up messing up the sched_domain debug
directory: passing a NULL parent to debugfs_create_dir() ends up creating
the directory at the debugfs root, which in this case creates
/sys/kernel/debug/domains (instead of /sys/kernel/debug/sched/domains).
This currently doesn't happen on asymmetric systems which use cpufreq-scpi
or cpufreq-dt drivers, as those are loaded via
deferred_probe_initcall() (it is also a late initcall, but appears to be
ordered *after* sched_debug_init()).
Ionela has been working on detecting maximum frequency asymmetry via ACPI,
and that actually happens via a *device* initcall, thus before
sched_debug_init(), and causes the aforementionned debugfs mayhem.
One option would be to punt sched_debug_init() down to
fs_initcall_sync(). Preventing update_sched_domain_debugfs() from running
before sched_debug_init() appears to be the safer option.
Fixes: 3b87f136f8fc ("sched,debug: Convert sysctl sched_domains to debugfs")
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lore.kernel.org/r/20210514095339.12979-1-ionela.voinescu@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0083242c93759dde353a963a90cb351c5c283379 ]
The scheduler currently expects NUMA node distances to be stable from
init onwards, and as a consequence builds the related data structures
once-and-for-all at init (see sched_init_numa()).
Unfortunately, on some architectures node distance is unreliable for
offline nodes and may very well change upon onlining.
Skip over offline nodes during sched_init_numa(). Track nodes that have
been onlined at least once, and trigger a build of a node's NUMA masks
when it is first onlined post-init.
Reported-by: Geetika Moolchandani <Geetika.Moolchandani1@ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210818074333.48645-1-srikar@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8c3b5e6ec0fee18bc2ce38d1dfe913413205f908 ]
If high resolution timers are disabled the timerfd notification about a
clock was set event is not happening for all cases which use
clock_was_set_delayed() because that's a NOP for HIGHRES=n, which is wrong.
Make clock_was_set_delayed() unconditially available to fix that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210713135158.196661266@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 627ef5ae2df8eeccb20d5af0e4cfa4df9e61ed28 ]
If __hrtimer_start_range_ns() is invoked with an already armed hrtimer then
the timer has to be canceled first and then added back. If the timer is the
first expiring timer then on removal the clockevent device is reprogrammed
to the next expiring timer to avoid that the pending expiry fires needlessly.
If the new expiry time ends up to be the first expiry again then the clock
event device has to reprogrammed again.
Avoid this by checking whether the timer is the first to expire and in that
case, keep the timer on the current CPU and delay the reprogramming up to
the point where the timer has been enqueued again.
Reported-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210713135157.873137732@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 406dd42bd1ba0c01babf9cde169bb319e52f6147 ]
When an itimer deactivates a previously armed expiration, it simply doesn't
do anything. As a result the process wide cputime counter keeps running and
the tick dependency stays set until it reaches the old ghost expiration
value.
This can be reproduced with the following snippet:
void trigger_process_counter(void)
{
struct itimerval n = {};
n.it_value.tv_sec = 100;
setitimer(ITIMER_VIRTUAL, &n, NULL);
n.it_value.tv_sec = 0;
setitimer(ITIMER_VIRTUAL, &n, NULL);
}
Fix this with resetting the relevant base expiration. This is similar to
disarming a timer.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210726125513.271824-4-frederic@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ccfc9dd6914feaa9a81f10f9cce56eb0f7712264 ]
The soft watchdog timer function checks if a virtual machine
was suspended and hence what looks like a lockup in fact
is a false positive.
This is what kvm_check_and_clear_guest_paused() does: it
tests guest PVCLOCK_GUEST_STOPPED (which is set by the host)
and if it's set then we need to touch all watchdogs and bail
out.
Watchdog timer function runs from IRQ, so PVCLOCK_GUEST_STOPPED
check works fine.
There is, however, one more watchdog that runs from IRQ, so
watchdog timer fn races with it, and that watchdog is not aware
of PVCLOCK_GUEST_STOPPED - RCU stall detector.
apic_timer_interrupt()
smp_apic_timer_interrupt()
hrtimer_interrupt()
__hrtimer_run_queues()
tick_sched_timer()
tick_sched_handle()
update_process_times()
rcu_sched_clock_irq()
This triggers RCU stalls on our devices during VM resume.
If tick_sched_handle()->rcu_sched_clock_irq() runs on a VCPU
before watchdog_timer_fn()->kvm_check_and_clear_guest_paused()
then there is nothing on this VCPU that touches watchdogs and
RCU reads stale gp stall timestamp and new jiffies value, which
makes it think that RCU has stalled.
Make RCU stall watchdog aware of PVCLOCK_GUEST_STOPPED and
don't report RCU stalls when we resume the VM.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b4da13aa28d4fd0071247b7b41c579ee8a86c81a ]
A missing clock update is causing the following warning:
rq->clock_update_flags < RQCF_ACT_SKIP
WARNING: CPU: 112 PID: 2041 at kernel/sched/sched.h:1453
sub_running_bw.isra.0+0x190/0x1a0
...
CPU: 112 PID: 2041 Comm: sugov:112 Tainted: G W 5.14.0-rc1 #1
Hardware name: WIWYNN Mt.Jade Server System
B81.030Z1.0007/Mt.Jade Motherboard, BIOS 1.6.20210526 (SCP:
1.06.20210526) 2021/05/26
...
Call trace:
sub_running_bw.isra.0+0x190/0x1a0
migrate_task_rq_dl+0xf8/0x1e0
set_task_cpu+0xa8/0x1f0
try_to_wake_up+0x150/0x3d4
wake_up_q+0x64/0xc0
__up_write+0xd0/0x1c0
up_write+0x4c/0x2b0
cppc_set_perf+0x120/0x2d0
cppc_cpufreq_set_target+0xe0/0x1a4 [cppc_cpufreq]
__cpufreq_driver_target+0x74/0x140
sugov_work+0x64/0x80
kthread_worker_fn+0xe0/0x230
kthread+0x138/0x140
ret_from_fork+0x10/0x18
The task causing this is the `cppc_fie` DL task introduced by
commit 1eb5dde674f5 ("cpufreq: CPPC: Add support for frequency
invariance").
With CONFIG_ACPI_CPPC_CPUFREQ_FIE=y and schedutil cpufreq governor on
slow-switching system (like on this Ampere Altra WIWYNN Mt. Jade Arm
Server):
DL task `curr=sugov:112` lets `p=cppc_fie` migrate and since the latter
is in `non_contending` state, migrate_task_rq_dl() calls
sub_running_bw()->__sub_running_bw()->cpufreq_update_util()->
rq_clock()->assert_clock_updated()
on p.
Fix this by updating the clock for a non_contending task in
migrate_task_rq_dl() before calling sub_running_bw().
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20210804135925.3734605-1-dietmar.eggemann@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f95091536f78971b269ec321b057b8d630b0ad8a ]
It is possible for sched_getattr() to incorrectly report the state of
the reset_on_fork flag when called on a deadline task.
Indeed, if the flag was set on a deadline task using sched_setattr()
with flags (SCHED_FLAG_RESET_ON_FORK | SCHED_FLAG_KEEP_PARAMS), then
p->sched_reset_on_fork will be set, but __setscheduler() will bail out
early, which means that the dl_se->flags will not get updated by
__setscheduler_params()->__setparam_dl(). Consequently, if
sched_getattr() is then called on the task, __getparam_dl() will
override kattr.sched_flags with the now out-of-date copy in dl_se->flags
and report the stale value to userspace.
To fix this, make sure to only copy the flags that are relevant to
sched_deadline to and from the dl_se->flags field.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210727101103.2729607-2-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 048661a1f963e9517630f080687d48af79ed784c ]
Yanfei reported that setting HANDOFF should not depend on recomputing
@first, only on @first state. Which would then give:
if (ww_ctx || !first)
first = __mutex_waiter_is_first(lock, &waiter);
if (first)
__mutex_set_flag(lock, MUTEX_FLAG_HANDOFF);
But because 'ww_ctx || !first' is basically 'always' and the test for
first is relatively cheap, omit that first branch entirely.
Reported-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Yanfei Xu <yanfei.xu@windriver.com>
Link: https://lore.kernel.org/r/20210630154114.896786297@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 67d69e9d1a6c889d98951c1d74b19332ce0565af upstream.
AUDIT_TRIM is expected to be idempotent, but multiple executions resulted
in a refcount underflow and use-after-free.
git bisect fingered commit fb041bb7c0a9 ("locking/refcount: Consolidate
implementations of refcount_t") but this patch with its more thorough
checking that wasn't in the x86 assembly code merely exposed a previously
existing tree refcount imbalance in the case of tree trimming code that
was refactored with prune_one() to remove a tree introduced in
commit 8432c7006297 ("audit: Simplify locking around untag_chunk()")
Move the put_tree() to cover only the prune_one() case.
Passes audit-testsuite and 3 passes of "auditctl -t" with at least one
directory watch.
Cc: Jan Kara <jack@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Seiji Nishikawa <snishika@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 8432c7006297 ("audit: Simplify locking around untag_chunk()")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
[PM: reformatted/cleaned-up the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Have get_push_task() check whether current has migration disabled and
thus avoid useless invocations of the migration thread
- Rework initialization flow so that all rq->core's are initialized,
even of CPUs which have not been onlined yet, so that iterating over
them all works as expected
* tag 'sched_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix get_push_task() vs migrate_disable()
sched: Fix Core-wide rq->lock for uninitialized CPUs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from can and bpf.
Closing three hw-dependent regressions. Any fixes of note are in the
'old code' category. Nothing blocking release from our perspective.
Current release - regressions:
- stmmac: revert "stmmac: align RX buffers"
- usb: asix: ax88772: move embedded PHY detection as early as
possible
- usb: asix: do not call phy_disconnect() for ax88178
- Revert "net: really fix the build...", from Kalle to fix QCA6390
Current release - new code bugs:
- phy: mediatek: add the missing suspend/resume callbacks
Previous releases - regressions:
- qrtr: fix another OOB Read in qrtr_endpoint_post
- stmmac: dwmac-rk: fix unbalanced pm_runtime_enable warnings
Previous releases - always broken:
- inet: use siphash in exception handling
- ip_gre: add validation for csum_start
- bpf: fix ringbuf helper function compatibility
- rtnetlink: return correct error on changing device netns
- e1000e: do not try to recover the NVM checksum on Tiger Lake"
* tag 'net-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits)
Revert "net: really fix the build..."
net: hns3: fix get wrong pfc_en when query PFC configuration
net: hns3: fix GRO configuration error after reset
net: hns3: change the method of getting cmd index in debugfs
net: hns3: fix duplicate node in VLAN list
net: hns3: fix speed unknown issue in bond 4
net: hns3: add waiting time before cmdq memory is released
net: hns3: clear hardware resource when loading driver
net: fix NULL pointer reference in cipso_v4_doi_free
rtnetlink: Return correct error on changing device netns
net: dsa: hellcreek: Adjust schedule look ahead window
net: dsa: hellcreek: Fix incorrect setting of GCL
cxgb4: dont touch blocked freelist bitmap after free
ipv4: use siphash instead of Jenkins in fnhe_hashfun()
ipv6: use siphash in rt6_exception_hash()
can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX and TX error counters
net: usb: asix: ax88772: fix boolconv.cocci warnings
net/sched: ets: fix crash when flipping from 'strict' to 'quantum'
qede: Fix memset corruption
net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdp
...
|
|
push_rt_task() attempts to move the currently running task away if the
next runnable task has migration disabled and therefore is pinned on the
current CPU.
The current task is retrieved via get_push_task() which only checks for
nr_cpus_allowed == 1, but does not check whether the task has migration
disabled and therefore cannot be moved either. The consequence is a
pointless invocation of the migration thread which correctly observes
that the task cannot be moved.
Return NULL if the task has migration disabled and cannot be moved to
another CPU.
Fixes: a7c81556ec4d3 ("sched: Fix migrate_disable() vs rt/dl balancing")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210826133738.yiotqbtdaxzjsnfj@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucount fixes from Eric Biederman:
"This branch fixes a regression that made it impossible to increase
rlimits that had been converted to the ucount infrastructure, and also
fixes a reference counting bug where the reference was not incremented
soon enough.
The fixes are trivial and the bugs have been encountered in the wild,
and the fixes have been tested"
* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Increase ucounts reference counter before the security hook
ucounts: Fix regression preventing increasing of rlimits in init_user_ns
|
|
We need to increment the ucounts reference counter befor security_prepare_creds()
because this function may fail and abort_creds() will try to decrement
this reference.
[ 96.465056][ T8641] FAULT_INJECTION: forcing a failure.
[ 96.465056][ T8641] name fail_page_alloc, interval 1, probability 0, space 0, times 0
[ 96.478453][ T8641] CPU: 1 PID: 8641 Comm: syz-executor668 Not tainted 5.14.0-rc6-syzkaller #0
[ 96.487215][ T8641] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
[ 96.497254][ T8641] Call Trace:
[ 96.500517][ T8641] dump_stack_lvl+0x1d3/0x29f
[ 96.505758][ T8641] ? show_regs_print_info+0x12/0x12
[ 96.510944][ T8641] ? log_buf_vmcoreinfo_setup+0x498/0x498
[ 96.516652][ T8641] should_fail+0x384/0x4b0
[ 96.521141][ T8641] prepare_alloc_pages+0x1d1/0x5a0
[ 96.526236][ T8641] __alloc_pages+0x14d/0x5f0
[ 96.530808][ T8641] ? __rmqueue_pcplist+0x2030/0x2030
[ 96.536073][ T8641] ? lockdep_hardirqs_on_prepare+0x3e2/0x750
[ 96.542056][ T8641] ? alloc_pages+0x3f3/0x500
[ 96.546635][ T8641] allocate_slab+0xf1/0x540
[ 96.551120][ T8641] ___slab_alloc+0x1cf/0x350
[ 96.555689][ T8641] ? kzalloc+0x1d/0x30
[ 96.559740][ T8641] __kmalloc+0x2e7/0x390
[ 96.563980][ T8641] ? kzalloc+0x1d/0x30
[ 96.568029][ T8641] kzalloc+0x1d/0x30
[ 96.571903][ T8641] security_prepare_creds+0x46/0x220
[ 96.577174][ T8641] prepare_creds+0x411/0x640
[ 96.581747][ T8641] __sys_setfsuid+0xe2/0x3a0
[ 96.586333][ T8641] do_syscall_64+0x3d/0xb0
[ 96.590739][ T8641] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 96.596611][ T8641] RIP: 0033:0x445a69
[ 96.600483][ T8641] Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[ 96.620152][ T8641] RSP: 002b:00007f1054173318 EFLAGS: 00000246 ORIG_RAX: 000000000000007a
[ 96.628543][ T8641] RAX: ffffffffffffffda RBX: 00000000004ca4c8 RCX: 0000000000445a69
[ 96.636600][ T8641] RDX: 0000000000000010 RSI: 00007f10541732f0 RDI: 0000000000000000
[ 96.644550][ T8641] RBP: 00000000004ca4c0 R08: 0000000000000001 R09: 0000000000000000
[ 96.652500][ T8641] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004ca4cc
[ 96.660631][ T8641] R13: 00007fffffe0b62f R14: 00007f1054173400 R15: 0000000000022000
Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred")
Reported-by: syzbot+01985d7909f9468f013c@syzkaller.appspotmail.com
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/97433b1742c3331f02ad92de5a4f07d673c90613.1629735352.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
"Ma, XinjianX" <xinjianx.ma@intel.com> reported:
> When lkp team run kernel selftests, we found after these series of patches, testcase mqueue: mq_perf_tests
> in kselftest failed with following message.
>
> # selftests: mqueue: mq_perf_tests
> #
> # Initial system state:
> # Using queue path: /mq_perf_tests
> # RLIMIT_MSGQUEUE(soft): 819200
> # RLIMIT_MSGQUEUE(hard): 819200
> # Maximum Message Size: 8192
> # Maximum Queue Size: 10
> # Nice value: 0
> #
> # Adjusted system state for testing:
> # RLIMIT_MSGQUEUE(soft): (unlimited)
> # RLIMIT_MSGQUEUE(hard): (unlimited)
> # Maximum Message Size: 16777216
> # Maximum Queue Size: 65530
> # Nice value: -20
> # Continuous mode: (disabled)
> # CPUs to pin: 3
> # ./mq_perf_tests: mq_open() at 296: Too many open files
> not ok 2 selftests: mqueue: mq_perf_tests # exit=1
> ```
>
> Test env:
> rootfs: debian-10
> gcc version: 9
After investigation the problem turned out to be that ucount_max for
the rlimits in init_user_ns was being set to the initial rlimit value.
The practical problem is that ucount_max provides a limit that
applications inside the user namespace can not exceed. Which means in
practice that rlimits that have been converted to use the ucount
infrastructure were not able to exceend their initial rlimits.
Solve this by setting the relevant values of ucount_max to
RLIM_INIFINITY. A limit in init_user_ns is pointless so the code
should allow the values to grow as large as possible without riscking
an underflow or an overflow.
As the ltp test case was a bit of a pain I have reproduced the rlimit failure
and tested the fix with the following little C program:
> #include <stdio.h>
> #include <fcntl.h>
> #include <sys/stat.h>
> #include <mqueue.h>
> #include <sys/time.h>
> #include <sys/resource.h>
> #include <errno.h>
> #include <string.h>
> #include <stdlib.h>
> #include <limits.h>
> #include <unistd.h>
>
> int main(int argc, char **argv)
> {
> struct mq_attr mq_attr;
> struct rlimit rlim;
> mqd_t mqd;
> int ret;
>
> ret = getrlimit(RLIMIT_MSGQUEUE, &rlim);
> if (ret != 0) {
> fprintf(stderr, "getrlimit(RLIMIT_MSGQUEUE) failed: %s\n", strerror(errno));
> exit(EXIT_FAILURE);
> }
> printf("RLIMIT_MSGQUEUE %lu %lu\n",
> rlim.rlim_cur, rlim.rlim_max);
> rlim.rlim_cur = RLIM_INFINITY;
> rlim.rlim_max = RLIM_INFINITY;
> ret = setrlimit(RLIMIT_MSGQUEUE, &rlim);
> if (ret != 0) {
> fprintf(stderr, "setrlimit(RLIMIT_MSGQUEUE, RLIM_INFINITY) failed: %s\n", strerror(errno));
> exit(EXIT_FAILURE);
> }
>
> memset(&mq_attr, 0, sizeof(struct mq_attr));
> mq_attr.mq_maxmsg = 65536 - 1;
> mq_attr.mq_msgsize = 16*1024*1024 - 1;
>
> mqd = mq_open("/mq_rlimit_test", O_RDONLY|O_CREAT, 0600, &mq_attr);
> if (mqd == (mqd_t)-1) {
> fprintf(stderr, "mq_open failed: %s\n", strerror(errno));
> exit(EXIT_FAILURE);
> }
> ret = mq_close(mqd);
> if (ret) {
> fprintf(stderr, "mq_close failed; %s\n", strerror(errno));
> exit(EXIT_FAILURE);
> }
>
> return EXIT_SUCCESS;
> }
Fixes: 6e52a9f0532f ("Reimplement RLIMIT_MSGQUEUE on top of ucounts")
Fixes: d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts")
Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Reported-by: kernel test robot lkp@intel.com
Acked-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/87eeajswfc.fsf_-_@disp2133
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Commit 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support
for it") extended check_map_func_compatibility() by enforcing map -> helper
function match, but not helper -> map type match.
Due to this all of the bpf_ringbuf_*() helper functions could be used with
a wrong map type such as array or hash map, leading to invalid access due
to type confusion.
Also, both BPF_FUNC_ringbuf_{submit,discard} have ARG_PTR_TO_ALLOC_MEM as
argument and not a BPF map. Therefore, their check_map_func_compatibility()
presence is incorrect since it's only for map type checking.
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Ryota Shiga (Flatt Security)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
|
|
Eugene tripped over the case where rq_lock(), as called in a
for_each_possible_cpu() loop came apart because rq->core hadn't been
setup yet.
This is a somewhat unusual, but valid case.
Rework things such that rq->core is initialized to point at itself. IOW
initialize each CPU as a single threaded Core. CPU online will then join
the new CPU (thread) to an existing Core where needed.
For completeness sake, have CPU offline fully undo the state so as to
not presume the topology will match the next time it comes online.
Fixes: 9edeaea1bc45 ("sched: Core-wide rq->lock")
Reported-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Tested-by: Eugene Syromiatnikov <esyr@redhat.com>
Link: https://lkml.kernel.org/r/YR473ZGeKqMs6kw+@hirez.programming.kicks-ass.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless and mac80211
trees.
Current release - regressions:
- tipc: call tipc_wait_for_connect only when dlen is not 0
- mac80211: fix locking in ieee80211_restart_work()
Current release - new code bugs:
- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()
- ethernet: ice: fix perout start time rounding
- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()
Previous releases - regressions:
- bpf: clear zext_dst of dead insns
- sch_cake: fix srchost/dsthost hashing mode
- vrf: reset skb conntrack connection on VRF rcv
- net/rds: dma_map_sg is entitled to merge entries
Previous releases - always broken:
- ethernet: bnxt: fix Tx path locking and races, add Rx path
barriers"
* tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
net: dpaa2-switch: disable the control interface on error path
Revert "flow_offload: action should not be NULL when it is referenced"
iavf: Fix ping is lost after untrusted VF had tried to change MAC
i40e: Fix ATR queue selection
r8152: fix the maximum number of PLA bp for RTL8153C
r8152: fix writing USB_BP2_EN
mptcp: full fully established support after ADD_ADDR
mptcp: fix memory leak on address flush
net/rds: dma_map_sg is entitled to merge entries
net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
net: asix: fix uninit value bugs
ovs: clear skb->tstamp in forwarding path
net: mdio-mux: Handle -EPROBE_DEFER correctly
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Delete unnecessary devm_kfree
net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
sch_cake: fix srchost/dsthost hashing mode
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
mac80211: fix locking in ieee80211_restart_work()
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-08-19
We've added 3 non-merge commits during the last 3 day(s) which contain
a total of 3 files changed, 29 insertions(+), 6 deletions(-).
The main changes are:
1) Fix to clear zext_dst for dead instructions which was causing invalid program
rejections on JITs with bpf_jit_needs_zext such as s390x, from Ilya Leoshkevich.
2) Fix RCU splat in bpf_get_current_{ancestor_,}cgroup_id() helpers when they are
invoked from sleepable programs, from Yonghong Song.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests, bpf: Test that dead ldx_w insns are accepted
bpf: Clear zext_dst of dead insns
bpf: Add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() helpers
====================
Link: https://lore.kernel.org/r/20210819144904.20069-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
