summaryrefslogtreecommitdiff
path: root/kernel
AgeCommit message (Collapse)Author
2022-08-04Merge tag 'for-linus-6.0-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a series fine tuning virtio support for Xen guests, including removal the now again unused "platform_has()" feature. - a fix for host admin triggered reboot of Xen guests - a simple spelling fix * tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: don't require virtio with grants for non-PV guests kernel: remove platform_has() infrastructure virtio: replace restricted mem access flag with callback xen: Fix spelling mistake xen/manage: Use orderly_reboot() to reboot
2022-08-04Merge tag 'char-misc-6.0-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem changes for 6.0-rc1. Highlights include: - large set of IIO driver updates, additions, and cleanups - new habanalabs device support added (loads of register maps much like GPUs have) - soundwire driver updates - phy driver updates - slimbus driver updates - tiny virt driver fixes and updates - misc driver fixes and updates - interconnect driver updates - hwtracing driver updates - fpga driver updates - extcon driver updates - firmware driver updates - counter driver update - mhi driver fixes and updates - binder driver fixes and updates - speakup driver fixes All of these have been in linux-next for a while without any reported problems" * tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits) drivers: lkdtm: fix clang -Wformat warning char: remove VR41XX related char driver misc: Mark MICROCODE_MINOR unused spmi: trace: fix stack-out-of-bound access in SPMI tracing functions dt-bindings: iio: adc: Add compatible for MT8188 iio: light: isl29028: Fix the warning in isl29028_remove() iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes iio: fix iio_format_avail_range() printing for none IIO_VAL_INT iio: adc: max1027: unlock on error path in max1027_read_single_value() iio: proximity: sx9324: add empty line in front of bullet list iio: magnetometer: hmc5843: Remove duplicate 'the' iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr() ...
2022-08-03Merge tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - New driver for logicvc - which is a display IP core. - EDID parser rework to add new extensions - fbcon scrolling improvements - i915 has some more DG2 work but not enabled by default, but should have enough features for userspace to work now. Otherwise it's lots of work all over the place. Detailed summary: New driver: - logicvc vfio: - use aperture API core: - of: Add data-lane helpers and convert drivers - connector: Remove deprecated ida_simple_get() media: - Add various RGB666 and RGB888 format constants panel: - Add HannStar HSD101PWW - Add ETML0700Y5DHA dma-buf: - add sync-file API - set dma mask for udmabuf devices fbcon: - Improve scrolling performance - Sanitize input fbdev: - device unregistering fixes - vesa: Support COMPILE_TEST - Disable firmware-device registration when first native driver loads aperture: - fix segfault during hot-unplug - export for use with other subsystems client: - use driver validated modes dp: - aux: make probing more reliable - mst: Read extended DPCD capabilities during system resume - Support waiting for HDP signal - Port-validation fixes edid: - CEA data-block iterators - struct drm_edid introduction - implement HF-EEODB extension gem: - don't use fb format non-existing planes probe-helper: - use 640x480 as displayport fallback scheduler: - don't kill jobs in interrupt context bridge: - Add support for i.MX8qxp and i.MX8qm - lots of fixes/cleanups - Add TI-DLPC3433 - fy07024di26a30d: Optional GPIO reset - ldb: Add reg and reg-name properties to bindings, Kconfig fixes - lt9611: Fix display sensing; - tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling - tc358775: Fix clock settings - ti-sn65dsi83: Allow GPIO to sleep - adv7511: I2C fixes - anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback - fsl-ldb: Drop DE flip - ti-sn65dsi86: Convert to atomic modesetting amdgpu: - use atomic fence helpers in DM - fix VRAM address calculations - export CRTC bpc via debugfs - Initial devcoredump support - Enable high priority gfx queue on asics which support it - Adjust GART size on newer APUs for S/G display - Soft reset for GFX 11 / SDMA 6 - Add gfxoff status query for vangogh - Fix timestamps for cursor only commits - Adjust GART size on newer APUs for S/G display - fix buddy memory corruption amdkfd: - MMU notifier fixes - P2P DMA support using dma-buf - Add available memory IOCTL - HMM profiler support - Simplify GPUVM validation - Unified memory for CWSR save/restore area i915: - General driver clean-up - DG2 enabling (still under force probe) - DG2 small BAR memory support - HuC loading support - DG2 workarounds - DG2/ATS-M device IDs added - Ponte Vecchio prep work and new blitter engines - add Meteorlake support - Fix sparse warnings - DMC MMIO range checks - Audio related fixes - Runtime PM fixes - PSR fixes - Media freq factor and per-gt enhancements - DSI fixes for ICL+ - Disable DMC flip queue handlers - ADL_P voltage swing updates - Use more the VBT for panel information - Fix on Type-C ports with TBT mode - Improve fastset and allow seamless M/N changes - Accept more fixed modes with VRR/DMRRS panels - Disable connector polling for a headless SKU - ADL-S display PLL w/a - Enable THP on Icelake and beyond - Fix i915_gem_object_ggtt_pin_ww regression on old platforms - Expose per tile media freq factor in sysfs - Fix dma_resv fence handling in multi-batch execbuf - Improve on suspend / resume time with VT-d enabled - export CRTC bpc settings via debugfs msm: - gpu: a619 support - gpu: Fix for unclocked GMU register access - gpu: Devcore dump enhancements - client utilization via fdinfo support - fix fence rollover issue - gem: Lockdep false-positive warning fix - gem: Switch to pfn mappings - WB support on sc7180 - dp: dropped custom bulk clock implementation - fix link retraining on resolution change - hdmi: dropped obsolete GPIO support tegra: - context isolation for host1x engines - tegra234 soc support mediatek: - add vdosys0/1 for mt8195 - add MT8195 dp_intf driver exynos: - Fix resume function issue of exynos decon driver by calling clk_disable_unprepare() properly if clk_prepare_enable() failed. nouveau: - set of misc fixes/cleanups - display cleanups gma500: - Cleanup connector I2C handling hyperv: - Unify VRAM allocation of Gen1 and Gen2 meson: - Support YUV422 output; Refcount fixes mgag200: - Support damage clipping - Support gamma handling - Protect concurrent HW access - Fixes to connector - Store model-specific limits in device-info structure - fix PCI register init panfrost: - Valhall support r128: - Fix bit-shift overflow rockchip: - Locking fixes in error path ssd130x: - Fix built-in linkage udl: - Always advertize VGA connector ast: - Support multiple outputs - fix black screen on resume sun4i: - HDMI PHY cleanups vc4: - Add support for BCM2711 vkms: - Allocate output buffer with vmalloc() mcde: - Fix ref-count leak mxsfb/lcdif: - Support i.MX8MP LCD controller stm/ltdc: - Support dynamic Z order - Support mirroring ingenic: - Fix display at maximum resolution" * tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits) drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code drm/amdgpu: enable support for psp 13.0.4 block drm/amdgpu: add files for PSP 13.0.4 drm/amdgpu: add header files for MP 13.0.4 drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index drm/amdgpu: send msg to IMU for the front-door loading drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b" drm/amdgpu: fix hive reference leak when reflecting psp topology info drm/amd/pm: enable GFX ULV feature support for SMU13.0.0 drm/amd/pm: update driver if header for SMU 13.0.0 drm/amdgpu: move mes self test after drm sched re-started drm/amdgpu: drop non-necessary call trace dump drm/amdgpu: enable VCN cg and JPEG cg/pg drm/amdgpu: vcn_4_0_2 video codec query drm/amdgpu: add VCN_4_0_2 firmware support drm/amdgpu: add VCN function in NBIO v7.7 drm/amdgpu: fix a vcn4 boot poll bug in emulation mode drm/amd/amdgpu: add memory training support for PSP_V13 drm/amdkfd: remove an unnecessary amdgpu_bo_ref drm/amd/pm: Add get_gfx_off_status interface for yellow carp ...
2022-08-03Merge tag 'net-next-6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking changes from Paolo Abeni: "Core: - Refactor the forward memory allocation to better cope with memory pressure with many open sockets, moving from a per socket cache to a per-CPU one - Replace rwlocks with RCU for better fairness in ping, raw sockets and IP multicast router. - Network-side support for IO uring zero-copy send. - A few skb drop reason improvements, including codegen the source file with string mapping instead of using macro magic. - Rename reference tracking helpers to a more consistent netdev_* schema. - Adapt u64_stats_t type to address load/store tearing issues. - Refine debug helper usage to reduce the log noise caused by bots. BPF: - Improve socket map performance, avoiding skb cloning on read operation. - Add support for 64 bits enum, to match types exposed by kernel. - Introduce support for sleepable uprobes program. - Introduce support for enum textual representation in libbpf. - New helpers to implement synproxy with eBPF/XDP. - Improve loop performances, inlining indirect calls when possible. - Removed all the deprecated libbpf APIs. - Implement new eBPF-based LSM flavor. - Add type match support, which allow accurate queries to the eBPF used types. - A few TCP congetsion control framework usability improvements. - Add new infrastructure to manipulate CT entries via eBPF programs. - Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel function. Protocols: - Introduce per network namespace lookup tables for unix sockets, increasing scalability and reducing contention. - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support. - Add support to forciby close TIME_WAIT TCP sockets via user-space tools. - Significant performance improvement for the TLS 1.3 receive path, both for zero-copy and not-zero-copy. - Support for changing the initial MTPCP subflow priority/backup status - Introduce virtually contingus buffers for sockets over RDMA, to cope better with memory pressure. - Extend CAN ethtool support with timestamping capabilities - Refactor CAN build infrastructure to allow building only the needed features. Driver API: - Remove devlink mutex to allow parallel commands on multiple links. - Add support for pause stats in distributed switch. - Implement devlink helpers to query and flash line cards. - New helper for phy mode to register conversion. New hardware / drivers: - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro. - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch. - Ethernet DSA driver for the Microchip LAN937x switch. - Ethernet PHY driver for the Aquantia AQR113C EPHY. - CAN driver for the OBD-II ELM327 interface. - CAN driver for RZ/N1 SJA1000 CAN controller. - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device. Drivers: - Intel Ethernet NICs: - i40e: add support for vlan pruning - i40e: add support for XDP framented packets - ice: improved vlan offload support - ice: add support for PPPoE offload - Mellanox Ethernet (mlx5) - refactor packet steering offload for performance and scalability - extend support for TC offload - refactor devlink code to clean-up the locking schema - support stacked vlans for bridge offloads - use TLS objects pool to improve connection rate - Netronome Ethernet NICs (nfp): - extend support for IPv6 fields mangling offload - add support for vepa mode in HW bridge - better support for virtio data path acceleration (VDPA) - enable TSO by default - Microsoft vNIC driver (mana) - add support for XDP redirect - Others Ethernet drivers: - bonding: add per-port priority support - microchip lan743x: extend phy support - Fungible funeth: support UDP segmentation offload and XDP xmit - Solarflare EF100: add support for virtual function representors - MediaTek SoC: add XDP support - Mellanox Ethernet/IB switch (mlxsw): - dropped support for unreleased H/W (XM router). - improved stats accuracy - unified bridge model coversion improving scalability (parts 1-6) - support for PTP in Spectrum-2 asics - Broadcom PHYs - add PTP support for BCM54210E - add support for the BCM53128 internal PHY - Marvell Ethernet switches (prestera): - implement support for multicast forwarding offload - Embedded Ethernet switches: - refactor OcteonTx MAC filter for better scalability - improve TC H/W offload for the Felix driver - refactor the Microchip ksz8 and ksz9477 drivers to share the probe code (parts 1, 2), add support for phylink mac configuration - Other WiFi: - Microchip wilc1000: diable WEP support and enable WPA3 - Atheros ath10k: encapsulation offload support Old code removal: - Neterion vxge ethernet driver: this is untouched since more than 10 years" * tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits) doc: sfp-phylink: Fix a broken reference wireguard: selftests: support UML wireguard: allowedips: don't corrupt stack when detecting overflow wireguard: selftests: update config fragments wireguard: ratelimiter: use hrtimer in selftest net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ net: usb: ax88179_178a: Bind only to vendor-specific interface selftests: net: fix IOAM test skip return code net: usb: make USB_RTL8153_ECM non user configurable net: marvell: prestera: remove reduntant code octeontx2-pf: Reduce minimum mtu size to 60 net: devlink: Fix missing mutex_unlock() call net/tls: Remove redundant workqueue flush before destroy net: txgbe: Fix an error handling path in txgbe_probe() net: dsa: Fix spelling mistakes and cleanup code Documentation: devlink: add add devlink-selftests to the table of contents dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock net: ionic: fix error check for vlan flags in ionic_set_nic_features() net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr() nfp: flower: add support for tunnel offload without key ID ...
2022-08-03Merge tag 'pull-work.lseek' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs lseek updates from Al Viro: "Jason's lseek series. Saner handling of 'lseek should fail with ESPIPE' - this gets rid of the magical no_llseek thing and makes checks consistent. In particular, the ad-hoc "can we do splice via internal pipe" checks got saner (and somewhat more permissive, which is what Jason had been after, AFAICT)" * tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: remove no_llseek fs: check FMODE_LSEEK to control internal pipe splicing vfio: do not set FMODE_LSEEK flag dma-buf: remove useless FMODE_LSEEK flag fs: do not compare against ->llseek fs: clear or set FMODE_LSEEK based on llseek function
2022-08-03Merge tag 'cgroup-for-5.20' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Several core optimizations: - threadgroup_rwsem write locking is skipped when configuring controllers in empty subtrees. Combined with CLONE_INTO_CGROUP, this allows the common static usage pattern to not grab threadgroup_rwsem at all (glibc still doesn't seem ready for CLONE_INTO_CGROUP unfortunately). - threadgroup_rwsem used to be put into non-percpu mode by default due to latency concerns in specific use cases. There's no reason for everyone else to pay for it. Make the behavior optional. - psi no longer allocates memory when disabled. ... along with some code cleanups" * tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Skip subtree root in cgroup_update_dfl_csses() cgroup: remove "no" prefixed mount options cgroup: Make !percpu threadgroup_rwsem operations optional cgroup: Add "no" prefixed mount options cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree cgroup.c: remove redundant check for mixable cgroup in cgroup_migrate_vet_dst cgroup.c: add helper __cset_cgroup_from_root to cleanup duplicated codes psi: dont alloc memory for psi by default
2022-08-02Merge tag 'linux-kselftest-kunit-5.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: "This consists of several fixes and an important feature to discourage running KUnit tests on production systems. Running tests on a production system could leave the system in a bad state. Summary: - Add a new taint type, TAINT_TEST to signal that a test has been run. This should discourage people from running these tests on production systems, and to make it easier to tell if tests have been run accidentally (by loading the wrong configuration, etc) - Several documentation and tool enhancements and fixes" * tag 'linux-kselftest-kunit-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits) Documentation: KUnit: Fix example with compilation error Documentation: kunit: Add CLI args for kunit_tool kcsan: test: Add a .kunitconfig to run KCSAN tests kunit: executor: Fix a memory leak on failure in kunit_filter_tests clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig mmc: sdhci-of-aspeed: test: Use kunit_test_suite() macro nitro_enclaves: test: Use kunit_test_suite() macro thunderbolt: test: Use kunit_test_suite() macro kunit: flatten kunit_suite*** to kunit_suite** in .kunit_test_suites kunit: unify module and builtin suite definitions selftest: Taint kernel when test module loaded module: panic: Taint the kernel when selftest modules load Documentation: kunit: fix example run_kunit func to allow spaces in args Documentation: kunit: Cleanup run_wrapper, fix x-ref kunit: test.h: fix a kernel-doc markup kunit: tool: Enable virtio/PCI by default on UML kunit: tool: make --kunitconfig repeatable, blindly concat kunit: add coverage_uml.config to enable GCOV on UML kunit: tool: refactor internal kconfig handling, allow overriding kunit: tool: introduce --qemu_args ...
2022-08-02Merge tag 'docs-6.0' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "This was a moderately busy cycle for documentation, but nothing all that earth-shaking: - More Chinese translations, and an update to the Italian translations. The Japanese, Korean, and traditional Chinese translations are more-or-less unmaintained at this point, instead. - Some build-system performance improvements. - The removal of the archaic submitting-drivers.rst document, with the movement of what useful material that remained into other docs. - Improvements to sphinx-pre-install to, hopefully, give more useful suggestions. - A number of build-warning fixes Plus the usual collection of typo fixes, updates, and more" * tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits) docs: efi-stub: Fix paths for x86 / arm stubs Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8 Docs/zh_CN: Update the translation of pci to 5.19-rc8 Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8 Docs/zh_CN: Update the translation of usage to 5.19-rc8 Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8 Docs/zh_CN: Update the translation of sparse to 5.19-rc8 Docs/zh_CN: Update the translation of kasan to 5.19-rc8 Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8 doc:it_IT: align Italian documentation docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst Documentation: process: Update email client instructions for Thunderbird docs: ABI: correct QEMU fw_cfg spec path doc/zh_CN: remove submitting-driver reference from docs docs: zh_TW: align to submitting-drivers removal docs: zh_CN: align to submitting-drivers removal docs: ko_KR: howto: remove reference to removed submitting-drivers docs: ja_JP: howto: remove reference to removed submitting-drivers docs: it_IT: align to submitting-drivers removal docs: process: remove outdated submitting-drivers.rst ...
2022-08-02Merge tag 'rcu.2022.07.26a' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: - Documentation updates - Miscellaneous fixes - Callback-offload updates, perhaps most notably a new RCU_NOCB_CPU_DEFAULT_ALL Kconfig option that causes all CPUs to be offloaded at boot time, regardless of kernel boot parameters. This is useful to battery-powered systems such as ChromeOS and Android. In addition, a new RCU_NOCB_CPU_CB_BOOST kernel boot parameter prevents offloaded callbacks from interfering with real-time workloads and with energy-efficiency mechanisms - Polled grace-period updates, perhaps most notably making these APIs account for both normal and expedited grace periods - Tasks RCU updates, perhaps most notably reducing the CPU overhead of RCU tasks trace grace periods by more than a factor of two on a system with 15,000 tasks. The reduction is expected to increase with the number of tasks, so it seems reasonable to hypothesize that a system with 150,000 tasks might see a 20-fold reduction in CPU overhead - Torture-test updates - Updates that merge RCU's dyntick-idle tracking into context tracking, thus reducing the overhead of transitioning to kernel mode from either idle or nohz_full userspace execution for kernels that track context independently of RCU. This is expected to be helpful primarily for kernels built with CONFIG_NO_HZ_FULL=y * tag 'rcu.2022.07.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (98 commits) rcu: Add irqs-disabled indicator to expedited RCU CPU stall warnings rcu: Diagnose extended sync_rcu_do_polled_gp() loops rcu: Put panic_on_rcu_stall() after expedited RCU CPU stall warnings rcutorture: Test polled expedited grace-period primitives rcu: Add polled expedited grace-period primitives rcutorture: Verify that polled GP API sees synchronous grace periods rcu: Make Tiny RCU grace periods visible to polled APIs rcu: Make polled grace-period API account for expedited grace periods rcu: Switch polled grace-period APIs to ->gp_seq_polled rcu/nocb: Avoid polling when my_rdp->nocb_head_rdp list is empty rcu/nocb: Add option to opt rcuo kthreads out of RT priority rcu: Add nocb_cb_kthread check to rcu_is_callbacks_kthread() rcu/nocb: Add an option to offload all CPUs on boot rcu/nocb: Fix NOCB kthreads spawn failure with rcu_nocb_rdp_deoffload() direct call rcu/nocb: Invert rcu_state.barrier_mutex VS hotplug lock locking order rcu/nocb: Add/del rdp to iterate from rcuog itself rcu/tree: Add comment to describe GP-done condition in fqs loop rcu: Initialize first_gp_fqs at declaration in rcu_gp_fqs() rcu/kvfree: Remove useless monitor_todo flag rcu: Cleanup RCU urgency state for offline CPU ...
2022-08-02Merge tag 'random-6.0-rc1-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: "Though there's been a decent amount of RNG-related development during this last cycle, not all of it is coming through this tree, as this cycle saw a shift toward tackling early boot time seeding issues, which took place in other trees as well. Here's a summary of the various patches: - The CONFIG_ARCH_RANDOM .config option and the "nordrand" boot option have been removed, as they overlapped with the more widely supported and more sensible options, CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu". This change allowed simplifying a bit of arch code. - x86's RDRAND boot time test has been made a bit more robust, with RDRAND disabled if it's clearly producing bogus results. This would be a tip.git commit, technically, but I took it through random.git to avoid a large merge conflict. - The RNG has long since mixed in a timestamp very early in boot, on the premise that a computer that does the same things, but does so starting at different points in wall time, could be made to still produce a different RNG state. Unfortunately, the clock isn't set early in boot on all systems, so now we mix in that timestamp when the time is actually set. - User Mode Linux now uses the host OS's getrandom() syscall to generate a bootloader RNG seed and later on treats getrandom() as the platform's RDRAND-like faculty. - The arch_get_random_{seed_,}_long() family of functions is now arch_get_random_{seed_,}_longs(), which enables certain platforms, such as s390, to exploit considerable performance advantages from requesting multiple CPU random numbers at once, while at the same time compiling down to the same code as before on platforms like x86. - A small cleanup changing a cmpxchg() into a try_cmpxchg(), from Uros. - A comment spelling fix" More info about other random number changes that come in through various architecture trees in the full commentary in the pull request: https://lore.kernel.org/all/20220731232428.2219258-1-Jason@zx2c4.com/ * tag 'random-6.0-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: random: correct spelling of "overwrites" random: handle archrandom with multiple longs um: seed rng using host OS rng random: use try_cmpxchg in _credit_init_bits timekeeping: contribute wall clock to rng on time change x86/rdrand: Remove "nordrand" flag in favor of "random.trust_cpu" random: remove CONFIG_ARCH_RANDOM
2022-08-02Merge tag 'integrity-v6.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "Aside from the one EVM cleanup patch, all the other changes are kexec related. On different architectures different keyrings are used to verify the kexec'ed kernel image signature. Here are a number of preparatory cleanup patches and the patches themselves for making the keyrings - builtin_trusted_keyring, .machine, .secondary_trusted_keyring, and .platform - consistent across the different architectures" * tag 'integrity-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: kexec, KEYS, s390: Make use of built-in and secondary keyring for signature verification arm64: kexec_file: use more system keyrings to verify kernel image signature kexec, KEYS: make the code in bzImage64_verify_sig generic kexec: clean up arch_kexec_kernel_verify_sig kexec: drop weak attribute from functions kexec_file: drop weak attribute from functions evm: Use IS_ENABLED to initialize .enabled
2022-08-02Merge tag 'safesetid-6.0' of https://github.com/micah-morton/linuxLinus Torvalds
Pull SafeSetID updates from Micah Morton: "This contains one commit that touches common kernel code, one that adds functionality internal to the SafeSetID LSM code, and a few other commits that only modify the SafeSetID LSM selftest. The commit that touches common kernel code simply adds an LSM hook in the setgroups() syscall that mirrors what is done for the existing LSM hooks in the setuid() and setgid() syscalls. This commit combined with the SafeSetID-specific one allow the LSM to filter setgroups() calls according to configured rule sets in the same way that is already done for setuid() and setgid()" * tag 'safesetid-6.0' of https://github.com/micah-morton/linux: LSM: SafeSetID: add setgroups() testing to selftest LSM: SafeSetID: Add setgroups() security policy handling security: Add LSM hook to setgroups() syscall LSM: SafeSetID: add GID testing to selftest LSM: SafeSetID: selftest cleanup and prepare for GIDs LSM: SafeSetID: fix userns bug in selftest
2022-08-02Merge tag 'audit-pr-20220801' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "Two minor audit patches: on marks a function as static, the other removes a redundant length check" * tag 'audit-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: make is_audit_feature_set() static audit: remove redundant data_len check
2022-08-02Merge tag 'execve-v5.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - Allow unsharing time namespace on vfork+exec (Andrei Vagin) - Replace usage of deprecated kmap APIs (Fabio M. De Francesco) - Fix spelling mistake (Zhang Jiaming) * tag 'execve-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: exec: Call kmap_local_page() in copy_string_kernel() exec: Fix a spelling mistake selftests/timens: add a test for vfork+exit fs/exec: allow to unshare a time namespace on vfork+exec
2022-08-02wireguard: ratelimiter: use hrtimer in selftestJason A. Donenfeld
Using msleep() is problematic because it's compared against ratelimiter.c's ktime_get_coarse_boottime_ns(), which means on systems with slow jiffies (such as UML's forced HZ=100), the result is inaccurate. So switch to using schedule_hrtimeout(). However, hrtimer gives us access only to the traditional posix timers, and none of the _COARSE variants. So now, rather than being too imprecise like jiffies, it's too precise. One solution would be to give it a large "range" value, but this will still fire early on a loaded system. A better solution is to align the timeout to the actual coarse timer, and then round up to the nearest tick, plus change. So add the timeout to the current coarse time, and then schedule_hrtimer() until the absolute computed time. This should hopefully reduce flakes in CI as well. Note that we keep the retry loop in case the entire function is running behind, because the test could still be scheduled out, by either the kernel or by the hypervisor's kernel, in which case restarting the test and hoping to not be scheduled out still helps. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-02Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Improve the type checking of request flags (Bart) - Ensure queue mapping for a single queues always picks the right queue (Bart) - Sanitize the io priority handling (Jan) - rq-qos race fix (Jinke) - Reserved tags handling improvements (John) - Separate memory alignment from file/disk offset aligment for O_DIRECT (Keith) - Add new ublk driver, userspace block driver using io_uring for communication with the userspace backend (Ming) - Use try_cmpxchg() to cleanup the code in various spots (Uros) - Finally remove bdevname() (Christoph) - Clean up the zoned device handling (Christoph) - Clean up independent access range support (Christoph) - Clean up and improve block sysfs handling (Christoph) - Clean up and improve teardown of block devices. This turns the usual two step process into something that is simpler to implement and handle in block drivers (Christoph) - Clean up chunk size handling (Christoph) - Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu, Ming, Sebastian, Yang, Ying) * tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits) ublk_drv: fix double shift bug ublk_drv: make sure that correct flags(features) returned to userspace ublk_drv: fix error handling of ublk_add_dev ublk_drv: fix lockdep warning block: remove __blk_get_queue block: call blk_mq_exit_queue from disk_release for never added disks blk-mq: fix error handling in __blk_mq_alloc_disk ublk: defer disk allocation ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask ublk: fold __ublk_create_dev into ublk_ctrl_add_dev ublk: cleanup ublk_ctrl_uring_cmd ublk: simplify ublk_ch_open and ublk_ch_release ublk: remove the empty open and release block device operations ublk: remove UBLK_IO_F_PREFLUSH ublk: add a MAINTAINERS entry block: don't allow the same type rq_qos add more than once mmc: fix disk/queue leak in case of adding disk failure ublk_drv: fix an IS_ERR() vs NULL check ublk: remove UBLK_IO_F_INTEGRITY ublk_drv: remove unneeded semicolon ...
2022-08-02Merge tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring updates from Jens Axboe: - As per (valid) complaint in the last merge window, fs/io_uring.c has grown quite large these days. io_uring isn't really tied to fs either, as it supports a wide variety of functionality outside of that. Move the code to io_uring/ and split it into files that either implement a specific request type, and split some code into helpers as well. The code is organized a lot better like this, and io_uring.c is now < 4K LOC (me). - Deprecate the epoll_ctl opcode. It'll still work, just trigger a warning once if used. If we don't get any complaints on this, and I don't expect any, then we can fully remove it in a future release (me). - Improve the cancel hash locking (Hao) - kbuf cleanups (Hao) - Efficiency improvements to the task_work handling (Dylan, Pavel) - Provided buffer improvements (Dylan) - Add support for recv/recvmsg multishot support. This is similar to the accept (or poll) support for have for multishot, where a single SQE can trigger everytime data is received. For applications that expect to do more than a few receives on an instantiated socket, this greatly improves efficiency (Dylan). - Efficiency improvements for poll handling (Pavel) - Poll cancelation improvements (Pavel) - Allow specifiying a range for direct descriptor allocations (Pavel) - Cleanup the cqe32 handling (Pavel) - Move io_uring types to greatly cleanup the tracing (Pavel) - Tons of great code cleanups and improvements (Pavel) - Add a way to do sync cancelations rather than through the sqe -> cqe interface, as that's a lot easier to use for some use cases (me). - Add support to IORING_OP_MSG_RING for sending direct descriptors to a different ring. This avoids the usually problematic SCM case, as we disallow those. (me) - Make the per-command alloc cache we use for apoll generic, place limits on it, and use it for netmsg as well (me). - Various cleanups (me, Michal, Gustavo, Uros) * tag 'for-5.20/io_uring-2022-07-29' of git://git.kernel.dk/linux-block: (172 commits) io_uring: ensure REQ_F_ISREG is set async offload net: fix compat pointer in get_compat_msghdr() io_uring: Don't require reinitable percpu_ref io_uring: fix types in io_recvmsg_multishot_overflow io_uring: Use atomic_long_try_cmpxchg in __io_account_mem io_uring: support multishot in recvmsg net: copy from user before calling __get_compat_msghdr net: copy from user before calling __copy_msghdr io_uring: support 0 length iov in buffer select in compat io_uring: fix multishot ending when not polled io_uring: add netmsg cache io_uring: impose max limit on apoll cache io_uring: add abstraction around apoll cache io_uring: move apoll cache to poll.c io_uring: consolidate hash_locked io-wq handling io_uring: clear REQ_F_HASH_LOCKED on hash removal io_uring: don't race double poll setting REQ_F_ASYNC_DATA io_uring: don't miss setting REQ_F_DOUBLE_POLL io_uring: disable multishot recvmsg io_uring: only trace one of complete or overflow ...
2022-08-02Merge tag 'pm-5.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These are mostly minor improvements all over including new CPU IDs for the Intel RAPL driver, an Energy Model rework to use micro-Watt as the power unit, cpufreq fixes and cleanus, cpuidle updates, devfreq updates, documentation cleanups and a new version of the pm-graph suite of utilities. Specifics: - Make cpufreq_show_cpus() more straightforward (Viresh Kumar). - Drop unnecessary CPU hotplug locking from store() used by cpufreq sysfs attributes (Viresh Kumar). - Make the ACPI cpufreq driver support the boost control interface on Zhaoxin/Centaur processors (Tony W Wang-oc). - Print a warning message on attempts to free an active cpufreq policy which should never happen (Viresh Kumar). - Fix grammar in the Kconfig help text for the loongson2 cpufreq driver (Randy Dunlap). - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq governor (Zhao Liu). - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll cpuidle driver (Eiichi Tsukata). - Modify intel_idle to treat C1 and C1E as independent idle states on Sapphire Rapids (Artem Bityutskiy). - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). - Add new devfreq driver for Mediatek CCI (Cache Coherent Interconnect) (Johnson Wang). - Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c (Krzysztof Kozlowski). - Address kernel-doc warnings by adding the description for unused function parameters in devfreq core (Mauro Carvalho Chehab). - Use NULL to pass a null pointer rather than zero according to the function propotype in imx-bus.c (Colin Ian King). - Print error message instead of error interger value in tegra30-devfreq.c (Dmitry Osipenko). - Add checks to prevent setting negative frequency QoS limits for CPUs (Shivnandan Kumar). - Update the pm-graph suite of utilities to the latest revision 5.9 including multiple improvements (Todd Brandt). - Drop pme_interrupt reference from the PCI power management documentation (Mario Limonciello)" * tag 'pm-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P PM: QoS: Add check to make sure CPU freq is non-negative PM: hibernate: defer device probing when resuming from hibernation intel_idle: make SPR C1 and C1E be independent cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask cpufreq: loongson2: fix Kconfig "its" grammar pm-graph v5.9 cpufreq: Warn users while freeing active policy cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers PM / devfreq: tegra30: Add error message for devm_devfreq_add_device() PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero PM / devfreq: shut up kernel-doc warnings dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver dt-bindings: interconnect: Add MediaTek CCI dt-bindings PM: domains: Ensure genpd_debugfs_dir exists before remove PM: runtime: Extend support for wakeirq for force_suspend|resume ...
2022-08-01Merge tag 'irq-core-2022-08-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for interrupt core and drivers: Core: - Fix a few inconsistencies between UP and SMP vs interrupt affinities - Small updates and cleanups all over the place New drivers: - LoongArch interrupt controller - Renesas RZ/G2L interrupt controller Updates: - Hotpath optimization for SiFive PLIC - Workaround for broken PLIC edge triggered interrupts - Simall cleanups and improvements as usual" * tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) irqchip/mmp: Declare init functions in common header file irqchip/mips-gic: Check the return value of ioremap() in gic_of_init() genirq: Use for_each_action_of_desc in actions_show() irqchip / ACPI: Introduce ACPI_IRQ_MODEL_LPIC for LoongArch irqchip: Add LoongArch CPU interrupt controller support irqchip: Add Loongson Extended I/O interrupt controller support irqchip/loongson-liointc: Add ACPI init support irqchip/loongson-pch-msi: Add ACPI init support irqchip/loongson-pch-pic: Add ACPI init support irqchip: Add Loongson PCH LPC controller support LoongArch: Prepare to support multiple pch-pic and pch-msi irqdomain LoongArch: Use ACPI_GENERIC_GSI for gsi handling genirq/generic_chip: Export irq_unmap_generic_chip ACPI: irq: Allow acpi_gsi_to_irq() to have an arch-specific fallback APCI: irq: Add support for multiple GSI domains LoongArch: Provisionally add ACPICA data structures irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains irqdomain: Report irq number for NOMAP domains irqchip/gic-v3: Fix comment typo dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/V2L SoC ...
2022-08-01Merge tag 'perf-core-2022-08-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events updates from Ingo Molnar: - Fix Intel Alder Lake PEBS memory access latency & data source profiling info bugs. - Use Intel large-PEBS hardware feature in more circumstances, to reduce PMI overhead & reduce sampling data. - Extend the lost-sample profiling output with the PERF_FORMAT_LOST ABI variant, which tells tooling the exact number of samples lost. - Add new IBS register bits definitions. - AMD uncore events: Add PerfMonV2 DF (Data Fabric) enhancements. * tag 'perf-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/ibs: Add new IBS register bits into header perf/x86/intel: Fix PEBS data source encoding for ADL perf/x86/intel: Fix PEBS memory access info encoding for ADL perf/core: Add a new read format to get a number of lost samples perf/x86/amd/uncore: Add PerfMonV2 RDPMC assignments perf/x86/amd/uncore: Add PerfMonV2 DF event format perf/x86/amd/uncore: Detect available DF counters perf/x86/amd/uncore: Use attr_update for format attributes perf/x86/amd/uncore: Use dynamic events array x86/events/intel/ds: Enable large PEBS for PERF_SAMPLE_WEIGHT_TYPE
2022-08-01Merge tag 'locking-core-2022-08-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "This was a fairly quiet cycle for the locking subsystem: - lockdep: Fix a handful of the more complex lockdep_init_map_*() primitives that can lose the lock_type & cause false reports. No such mishap was observed in the wild. - jump_label improvements: simplify the cross-arch support of initial NOP patching by making it arch-specific code (used on MIPS only), and remove the s390 initial NOP patching that was superfluous" * tag 'locking-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Fix lockdep_init_map_*() confusion jump_label: make initial NOP patching the special case jump_label: mips: move module NOP patching into arch code jump_label: s390: avoid pointless initial NOP patching
2022-08-01Merge tag 'sched-core-2022-08-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "Load-balancing improvements: - Improve NUMA balancing on AMD Zen systems for affine workloads. - Improve the handling of reduced-capacity CPUs in load-balancing. - Energy Model improvements: fix & refine all the energy fairness metrics (PELT), and remove the conservative threshold requiring 6% energy savings to migrate a task. Doing this improves power efficiency for most workloads, and also increases the reliability of energy-efficiency scheduling. - Optimize/tweak select_idle_cpu() to spend (much) less time searching for an idle CPU on overloaded systems. There's reports of several milliseconds spent there on large systems with large workloads ... [ Since the search logic changed, there might be behavioral side effects. ] - Improve NUMA imbalance behavior. On certain systems with spare capacity, initial placement of tasks is non-deterministic, and such an artificial placement imbalance can persist for a long time, hurting (and sometimes helping) performance. The fix is to make fork-time task placement consistent with runtime NUMA balancing placement. Note that some performance regressions were reported against this, caused by workloads that are not memory bandwith limited, which benefit from the artificial locality of the placement bug(s). Mel Gorman's conclusion, with which we concur, was that consistency is better than random workload benefits from non-deterministic bugs: "Given there is no crystal ball and it's a tradeoff, I think it's better to be consistent and use similar logic at both fork time and runtime even if it doesn't have universal benefit." - Improve core scheduling by fixing a bug in sched_core_update_cookie() that caused unnecessary forced idling. - Improve wakeup-balancing by allowing same-LLC wakeup of idle CPUs for newly woken tasks. - Fix a newidle balancing bug that introduced unnecessary wakeup latencies. ABI improvements/fixes: - Do not check capabilities and do not issue capability check denial messages when a scheduler syscall doesn't require privileges. (Such as increasing niceness.) - Add forced-idle accounting to cgroups too. - Fix/improve the RSEQ ABI to not just silently accept unknown flags. (No existing tooling is known to have learned to rely on the previous behavior.) - Depreciate the (unused) RSEQ_CS_FLAG_NO_RESTART_ON_* flags. Optimizations: - Optimize & simplify leaf_cfs_rq_list() - Micro-optimize set_nr_{and_not,if}_polling() via try_cmpxchg(). Misc fixes & cleanups: - Fix the RSEQ self-tests on RISC-V and Glibc 2.35 systems. - Fix a full-NOHZ bug that can in some cases result in the tick not being re-enabled when the last SCHED_RT task is gone from a runqueue but there's still SCHED_OTHER tasks around. - Various PREEMPT_RT related fixes. - Misc cleanups & smaller fixes" * tag 'sched-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits) rseq: Kill process when unknown flags are encountered in ABI structures rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_* flags sched/core: Fix the bug that task won't enqueue into core tree when update cookie nohz/full, sched/rt: Fix missed tick-reenabling bug in dequeue_task_rt() sched/core: Always flush pending blk_plug sched/fair: fix case with reduced capacity CPU sched/core: Use try_cmpxchg in set_nr_{and_not,if}_polling sched/core: add forced idle accounting for cgroups sched/fair: Remove the energy margin in feec() sched/fair: Remove task_util from effective utilization in feec() sched/fair: Use the same cpumask per-PD throughout find_energy_efficient_cpu() sched/fair: Rename select_idle_mask to select_rq_mask sched, drivers: Remove max param from effective_cpu_util()/sched_cpu_util() sched/fair: Decay task PELT values during wakeup migration sched/fair: Provide u64 read for 32-bits arch helper sched/fair: Introduce SIS_UTIL to search idle CPU based on sum of util_avg sched: only perform capability check on privileged operation sched: Remove unused function group_first_cpu() sched/fair: Remove redundant word " *" selftests/rseq: check if libc rseq support is registered ...
2022-08-01rseq: Kill process when unknown flags are encountered in ABI structuresMathieu Desnoyers
rseq_abi()->flags and rseq_abi()->rseq_cs->flags 29 upper bits are currently unused. The current behavior when those bits are set is to ignore them. This is not an ideal behavior, because when future features will start using those flags, if user-space fails to correctly validate that the kernel indeed supports those flags (e.g. with a new sys_rseq flags bit) before using them, it may incorrectly assume that the kernel will handle those flags way when in fact those will be silently ignored on older kernels. Validating that unused flags bits are cleared will allow a smoother transition when those flags will start to be used by allowing applications to fail early, and obviously, when they attempt to use the new flags on an older kernel that does not support them. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20220622194617.1155957-2-mathieu.desnoyers@efficios.com
2022-08-01rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_* flagsMathieu Desnoyers
The pretty much unused RSEQ_CS_FLAG_NO_RESTART_ON_* flags introduce complexity in rseq, and are subtly buggy [1]. Solving those issues requires introducing additional complexity in the rseq implementation for each supported architecture. Considering that it complexifies the rseq ABI, I am proposing that we deprecate those flags. [2] So far there appears to be consensus from maintainers of user-space projects impacted by this feature that its removal would be a welcome simplification. [3] The deprecation approach proposed here is to issue WARN_ON_ONCE() when encountering those flags and kill the offending process with sigsegv. This should allow us to quickly identify whether anyone yells at us for removing this. Link: https://lore.kernel.org/lkml/20220618182515.95831-1-minhquangbui99@gmail.com/ [1] Link: https://lore.kernel.org/lkml/258546133.12151.1655739550814.JavaMail.zimbra@efficios.com/ [2] Link: https://lore.kernel.org/lkml/87pmj1enjh.fsf@email.froward.int.ebiederm.org/ [3] Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/lkml/20220622194617.1155957-1-mathieu.desnoyers@efficios.com
2022-08-01kernel: remove platform_has() infrastructureJuergen Gross
The only use case of the platform_has() infrastructure has been removed again, so remove the whole feature. Signed-off-by: Juergen Gross <jgross@suse.com> Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 guest using Xen Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20220622063838.8854-3-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-07-31Merge tag 'x86_urgent_for_v5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Update the 'mitigations=' kernel param documentation - Check the IBPB feature flag before enabling IBPB in firmware calls because cloud vendors' fantasy when it comes to creating guest configurations is unlimited - Unexport sev_es_ghcb_hv_call() before 5.19 releases now that HyperV doesn't need it anymore - Remove dead CONFIG_* items * tag 'x86_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed x86/bugs: Do not enable IBPB at firmware entry when IBPB is not available Revert "x86/sev: Expose sev_es_ghcb_hv_call() for use by HyperV" x86/configs: Update configs in x86_debug.config
2022-07-31Merge tag 'locking_urgent_for_v5.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Borislav Petkov: - Avoid rwsem lockups in certain situations when handling the handoff bit * tag 'locking_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Allow slowpath writer to ignore handoff bit if not set by first waiter
2022-07-30locking/rwsem: Allow slowpath writer to ignore handoff bit if not set by ↵Waiman Long
first waiter With commit d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more consistent"), the writer that sets the handoff bit can be interrupted out without clearing the bit if the wait queue isn't empty. This disables reader and writer optimistic lock spinning and stealing. Now if a non-first writer in the queue is somehow woken up or a new waiter enters the slowpath, it can't acquire the lock. This is not the case before commit d257cc8cb8d5 as the writer that set the handoff bit will clear it when exiting out via the out_nolock path. This is less efficient as the busy rwsem stays in an unlock state for a longer time. In some cases, this new behavior may cause lockups as shown in [1] and [2]. This patch allows a non-first writer to ignore the handoff bit if it is not originally set or initiated by the first waiter. This patch is shown to be effective in fixing the lockup problem reported in [1]. [1] https://lore.kernel.org/lkml/20220617134325.GC30825@techsingularity.net/ [2] https://lore.kernel.org/lkml/3f02975c-1a9d-be20-32cf-f1d8e3dfafcc@oracle.com/ Fixes: d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more consistent") Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Tested-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/20220622200419.778799-1-longman@redhat.com
2022-07-29Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Andrii Nakryiko says: ==================== bpf-next 2022-07-29 We've added 22 non-merge commits during the last 4 day(s) which contain a total of 27 files changed, 763 insertions(+), 120 deletions(-). The main changes are: 1) Fixes to allow setting any source IP with bpf_skb_set_tunnel_key() helper, from Paul Chaignon. 2) Fix for bpf_xdp_pointer() helper when doing sanity checking, from Joanne Koong. 3) Fix for XDP frame length calculation, from Lorenzo Bianconi. 4) Libbpf BPF_KSYSCALL docs improvements and fixes to selftests to accommodate s390x quirks with socketcall(), from Ilya Leoshkevich. 5) Allow/denylist and CI configs additions to selftests/bpf to improve BPF CI, from Daniel Müller. 6) BPF trampoline + ftrace follow up fixes, from Song Liu and Xu Kuohai. 7) Fix allocation warnings in netdevsim, from Jakub Kicinski. 8) bpf_obj_get_opts() libbpf API allowing to provide file flags, from Joe Burton. 9) vsnprintf usage fix in bpf_snprintf_btf(), from Fedor Tokarev. 10) Various small fixes and clean ups, from Daniel Müller, Rongguang Wei, Jörn-Thorben Hinz, Yang Li. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (22 commits) bpf: Remove unneeded semicolon libbpf: Add bpf_obj_get_opts() netdevsim: Avoid allocation warnings triggered from user space bpf: Fix NULL pointer dereference when registering bpf trampoline bpf: Fix test_progs -j error with fentry/fexit tests selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeout bpftool: Don't try to return value from void function in skeleton bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macro bpf: btf: Fix vsnprintf return value check libbpf: Support PPC in arch_specific_syscall_pfx selftests/bpf: Adjust vmtest.sh to use local kernel configuration selftests/bpf: Copy over libbpf configs selftests/bpf: Sort configuration selftests/bpf: Attach to socketcall() in test_probe_user libbpf: Extend BPF_KSYSCALL documentation bpf, devmap: Compute proper xdp_frame len redirecting frames bpf: Fix bpf_xdp_pointer return pointer selftests/bpf: Don't assign outer source IP to host bpf: Set flow flag to allow any source IP in bpf_tunnel_key geneve: Use ip_tunnel_key flow flags in route lookups ... ==================== Link: https://lore.kernel.org/r/20220729230948.1313527-1-andrii@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-29bpf: Remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: /kernel/bpf/trampoline.c:101:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220725222733.55613-1-yang.lee@linux.alibaba.com
2022-07-29bpf: Fix NULL pointer dereference when registering bpf trampolineXu Kuohai
A panic was reported on arm64: [ 44.517109] audit: type=1334 audit(1658859870.268:59): prog-id=19 op=LOAD [ 44.622031] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 44.624321] Mem abort info: [ 44.625049] ESR = 0x0000000096000004 [ 44.625935] EC = 0x25: DABT (current EL), IL = 32 bits [ 44.627182] SET = 0, FnV = 0 [ 44.627930] EA = 0, S1PTW = 0 [ 44.628684] FSC = 0x04: level 0 translation fault [ 44.629788] Data abort info: [ 44.630474] ISV = 0, ISS = 0x00000004 [ 44.631362] CM = 0, WnR = 0 [ 44.632041] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100ab5000 [ 44.633494] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 [ 44.635202] Internal error: Oops: 96000004 [#1] SMP [ 44.636452] Modules linked in: xfs crct10dif_ce ghash_ce virtio_blk virtio_console virtio_mmio qemu_fw_cfg [ 44.638713] CPU: 2 PID: 1 Comm: systemd Not tainted 5.19.0-rc7 #1 [ 44.640164] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 44.641799] pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 44.643404] pc : ftrace_set_filter_ip+0x24/0xa0 [ 44.644659] lr : bpf_trampoline_update.constprop.0+0x428/0x4a0 [ 44.646118] sp : ffff80000803b9f0 [ 44.646950] x29: ffff80000803b9f0 x28: ffff0b5d80364400 x27: ffff80000803bb48 [ 44.648721] x26: ffff8000085ad000 x25: ffff0b5d809d2400 x24: 0000000000000000 [ 44.650493] x23: 00000000ffffffed x22: ffff0b5dd7ea0900 x21: 0000000000000000 [ 44.652279] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 44.654067] x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff [ 44.655787] x14: ffff0b5d809d2498 x13: ffff0b5d809d2432 x12: 0000000005f5e100 [ 44.657535] x11: abcc77118461cefd x10: 000000000000005f x9 : ffffa7219cb5b190 [ 44.659254] x8 : ffffa7219c8e0000 x7 : 0000000000000000 x6 : ffffa7219db075e0 [ 44.661066] x5 : ffffa7219d3130e0 x4 : ffffa7219cab9da0 x3 : 0000000000000000 [ 44.662837] x2 : 0000000000000000 x1 : ffffa7219cb7a5c0 x0 : 0000000000000000 [ 44.664675] Call trace: [ 44.665274] ftrace_set_filter_ip+0x24/0xa0 [ 44.666327] bpf_trampoline_update.constprop.0+0x428/0x4a0 [ 44.667696] __bpf_trampoline_link_prog+0xcc/0x1c0 [ 44.668834] bpf_trampoline_link_prog+0x40/0x64 [ 44.669919] bpf_tracing_prog_attach+0x120/0x490 [ 44.671011] link_create+0xe0/0x2b0 [ 44.671869] __sys_bpf+0x484/0xd30 [ 44.672706] __arm64_sys_bpf+0x30/0x40 [ 44.673678] invoke_syscall+0x78/0x100 [ 44.674623] el0_svc_common.constprop.0+0x4c/0xf4 [ 44.675783] do_el0_svc+0x38/0x4c [ 44.676624] el0_svc+0x34/0x100 [ 44.677429] el0t_64_sync_handler+0x11c/0x150 [ 44.678532] el0t_64_sync+0x190/0x194 [ 44.679439] Code: 2a0203f4 f90013f5 2a0303f5 f9001fe1 (f9400800) [ 44.680959] ---[ end trace 0000000000000000 ]--- [ 44.682111] Kernel panic - not syncing: Oops: Fatal exception [ 44.683488] SMP: stopping secondary CPUs [ 44.684551] Kernel Offset: 0x2721948e0000 from 0xffff800008000000 [ 44.686095] PHYS_OFFSET: 0xfffff4a380000000 [ 44.687144] CPU features: 0x010,00022811,19001080 [ 44.688308] Memory Limit: none [ 44.689082] ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- It's caused by a NULL tr->fops passed to ftrace_set_filter_ip(). tr->fops is initialized to NULL and is assigned to an allocated memory address if CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is enabled. Since there is no direct call on arm64 yet, the config can't be enabled. To fix it, call ftrace_set_filter_ip() only if tr->fops is not NULL. Fixes: 00963a2e75a8 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)") Reported-by: Bruno Goncalves <bgoncalv@redhat.com> Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Bruno Goncalves <bgoncalv@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20220728114048.3540461-1-xukuohai@huaweicloud.com
2022-07-29bpf: Fix test_progs -j error with fentry/fexit testsSong Liu
When multiple threads are attaching/detaching fentry/fexit programs to the same trampoline, we may call register_fentry on the same trampoline twice: register_fentry(), unregister_fentry(), then register_fentry again. This causes ftrace_set_filter_ip() for the same ip on tr->fops twice, which leaves duplicated ip in tr->fops. The extra ip is not cleaned up properly on unregister and thus causes failures with further register in register_ftrace_direct_multi(): register_ftrace_direct_multi() { ... for (i = 0; i < size; i++) { hlist_for_each_entry(entry, &hash->buckets[i], hlist) { if (ftrace_find_rec_direct(entry->ip)) goto out_unlock; } } ... } This can be triggered with parallel fentry/fexit tests with test_progs: ./test_progs -t fentry,fexit -j Fix this by resetting tr->fops in ftrace_set_filter_ip(), so that there will never be duplicated entries in tr->fops. Fixes: 00963a2e75a8 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)") Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220729194106.1207472-1-song@kernel.org
2022-07-29Merge tag 'wq-for-5.19-rc8-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "Just one commit to suppress a spurious warning added during the 5.19 cycle" * tag 'wq-for-5.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Avoid a false warning in unbind_workers()
2022-07-29workqueue: Avoid a false warning in unbind_workers()Lai Jiangshan
Doing set_cpus_allowed_ptr() with wq_unbound_cpumask can be possible fails and trigger the false warning. Use cpu_possible_mask instead when wq_unbound_cpumask has no active CPUs. It is very easy to trigger the warning: Set wq_unbound_cpumask to a small set of CPUs. Offline all the CPUs of wq_unbound_cpumask. Offline an extra CPU and trigger the warning. Fixes: 10a5a651e3af ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs") Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2022-07-29Merge branches 'pm-devfreq', 'pm-qos', 'pm-tools' and 'pm-docs'Rafael J. Wysocki
Merge devfreq changes, PM QoS change, and power management tools and documentation changes for v5.20-rc1: - Add new devfreq driver for Mediatek CCI (Cache Coherent Interconnect) (Johnson Wang). - Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c (Krzysztof Kozlowski). - Address kernel-doc warnings by adding the description for unused fucntion parameters in devfreq core (Mauro Carvalho Chehab). - Use NULL to pass a null pointer rather than zero according to the function propotype in imx-bus.c (Colin Ian King). - Print error message instead of error interger value in tegra30-devfreq.c (Dmitry Osipenko). - Add checks to prevent setting negative frequency QoS limits for CPUs (Shivnandan Kumar). - Update the pm-graph suite of utilities to the latest revision 5.9 including multiple improvements (Todd Brandt). - Drop pme_interrupt reference from the PCI power management documentation (Mario Limonciello). * pm-devfreq: PM / devfreq: tegra30: Add error message for devm_devfreq_add_device() PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero PM / devfreq: shut up kernel-doc warnings dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver dt-bindings: interconnect: Add MediaTek CCI dt-bindings * pm-qos: PM: QoS: Add check to make sure CPU freq is non-negative * pm-tools: pm-graph v5.9 * pm-docs: Documentation: PM: Drop pme_interrupt reference
2022-07-29Merge branches 'pm-core', 'pm-sleep', 'powercap', 'pm-domains' and 'pm-em'Rafael J. Wysocki
Merge core device power management changes for v5.20-rc1: - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). * pm-core: PM: runtime: Extend support for wakeirq for force_suspend|resume * pm-sleep: PM: hibernate: defer device probing when resuming from hibernation PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP * powercap: powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P powercap: intel_rapl: Add support for RAPTORLAKE_P * pm-domains: PM: domains: Ensure genpd_debugfs_dir exists before remove * pm-em: cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers
2022-07-29bpf: btf: Fix vsnprintf return value checkFedor Tokarev
vsnprintf returns the number of characters which would have been written if enough space had been available, excluding the terminating null byte. Thus, the return value of 'len_left' means that the last character has been dropped. Signed-off-by: Fedor Tokarev <ftokarev@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20220711211317.GA1143610@laptop
2022-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-28cgroup: Skip subtree root in cgroup_update_dfl_csses()Waiman Long
The cgroup_update_dfl_csses() function updates css associations when a cgroup's subtree_control file is modified. Any changes made to a cgroup's subtree_control file, however, will only affect its descendants but not the cgroup itself. So there is no point in migrating csses associated with that cgroup. We can skip them instead. Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2022-07-28watch_queue: Fix missing locking in add_watch_to_object()Linus Torvalds
If a watch is being added to a queue, it needs to guard against interference from addition of a new watch, manual removal of a watch and removal of a watch due to some other queue being destroyed. KEYCTL_WATCH_KEY guards against this for the same {key,queue} pair by holding the key->sem writelocked and by holding refs on both the key and the queue - but that doesn't prevent interaction from other {key,queue} pairs. While add_watch_to_object() does take the spinlock on the event queue, it doesn't take the lock on the source's watch list. The assumption was that the caller would prevent that (say by taking key->sem) - but that doesn't prevent interference from the destruction of another queue. Fix this by locking the watcher list in add_watch_to_object(). Fixes: c73be61cede5 ("pipe: Add general notification queue support") Reported-by: syzbot+03d7b43290037d1f87ca@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: keyrings@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-28watch_queue: Fix missing rcu annotationDavid Howells
Since __post_watch_notification() walks wlist->watchers with only the RCU read lock held, we need to use RCU methods to add to the list (we already use RCU methods to remove from the list). Fix add_watch_to_object() to use hlist_add_head_rcu() instead of hlist_add_head() for that list. Fixes: c73be61cede5 ("pipe: Add general notification queue support") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-28Merge tag 'irqchip-5.20' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip/genirq updates from Marc Zyngier: * Core code update: - Non-SMP IRQ affinity fixes, allowing UP kernel to behave similarly to SMP ones for the purpose of interrupt affinity - Let irq_set_chip_handler_name_locked() take a const struct irq_chip * - Tidy-up the NOMAP irqdomain API variant - Teach action_show() to use for_each_action_of_desc() - Make irq_chip_request_resources_parent() allow the parent callback to be optional - Remove dynamic allocations from populate_parent_alloc_arg() * New drivers: - Merge the long awaited IRQ support for the LoongArch architecture, with the provisional ACPICA update (to be reverted once the official support lands) - New Renesas RZ/G2L IRQC driver, equipped with its companion GPIO driver * Driver updates - Optimise the hot path operations for the SiFive PLIC, trading the locking for per-CPU priority masking masking operations which are apparently faster - Work around broken PLIC implementations that deal pretty badly with edge-triggered interrupts. Flag two implementations as affected. - Simplify the irq-stm32-exti driver, particularly the table that remaps the interrupts from exti to the GIC, reducing the memory usage - Convert the ocelot irq_chip to being immutable - Check ioremap() return value in the MIPS GIC driver - Move MMP driver init function declarations into the common .h - The obligatory typo fixes Link: https://lore.kernel.org/all/20220727192356.1860546-1-maz@kernel.org
2022-07-27cgroup: remove "no" prefixed mount optionsTejun Heo
30312730bd02 ("cgroup: Add "no" prefixed mount options") added "no" prefixed mount options to allow turning them off and 6a010a49b63a ("cgroup: Make !percpu threadgroup_rwsem operations optional") added one more "no" prefixed mount option. However, Michal pointed out that the "no" prefixed options aren't necessary in allowing mount options to be turned off: # grep group /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,relatime,nsdelegate,memory_recursiveprot 0 0 # mount -o remount,nsdelegate,memory_recursiveprot none /sys/fs/cgroup # grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,relatime,nsdelegate,memory_recursiveprot 0 0 Note that this is different from the remount behavior when the mount(1) is invoked without the device argument - "none": # grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot 0 0 # mount -o remount,nsdelegate,memory_recursiveprot /sys/fs/cgroup # grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot 0 0 While a bit confusing, given that there is a way to turn off the options, there's no reason to have the explicit "no" prefixed options. Let's remove them. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2022-07-27x86/configs: Update configs in x86_debug.configLukas Bulwahn
Commit 4675ff05de2d ("kmemcheck: rip it out") removed kmemcheck and its corresponding build config KMEMCHECK. Commit 0f620cefd775 ("objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"") renamed the debug config option. Adjust x86_debug.config to those changes in debug configs. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220722121815.27535-1-lukas.bulwahn@gmail.com
2022-07-26PM: QoS: Add check to make sure CPU freq is non-negativeShivnandan Kumar
CPU frequency should never be negative. If some client driver calls freq_qos_update_request with a negative value which will be very high in absolute terms, then frequency QoS sets max CPU freq at fmax as it considers it's absolute value but it will add plist node with negative priority. plist node has priority from INT_MIN (highest) to INT_MAX(lowest). Once priority is set as negative, another client will not be able to reduce CPU frequency. Adding check to make sure CPU freq is non-negative will fix this problem. Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26PM: hibernate: defer device probing when resuming from hibernationTetsuo Handa
syzbot is reporting hung task at misc_open() [1], for there is a race window of AB-BA deadlock which involves probe_count variable. Currently wait_for_device_probe() from snapshot_open() from misc_open() can sleep forever with misc_mtx held if probe_count cannot become 0. When a device is probed by hub_event() work function, probe_count is incremented before the probe function starts, and probe_count is decremented after the probe function completed. There are three cases that can prevent probe_count from dropping to 0. (a) A device being probed stopped responding (i.e. broken/malicious hardware). (b) A process emulating a USB device using /dev/raw-gadget interface stopped responding for some reason. (c) New device probe requests keeps coming in before existing device probe requests complete. The phenomenon syzbot is reporting is (b). A process which is holding system_transition_mutex and misc_mtx is waiting for probe_count to become 0 inside wait_for_device_probe(), but the probe function which is called from hub_event() work function is waiting for the processes which are blocked at mutex_lock(&misc_mtx) to respond via /dev/raw-gadget interface. This patch mitigates (b) by deferring wait_for_device_probe() from snapshot_open() to snapshot_write() and snapshot_ioctl(). Please note that the possibility of (b) remains as long as any thread which is emulating a USB device via /dev/raw-gadget interface can be blocked by uninterruptible blocking operations (e.g. mutex_lock()). Please also note that (a) and (c) are not addressed. Regarding (c), we should change the code to wait for only one device which contains the image for resuming from hibernation. I don't know how to address (a), for use of timeout for wait_for_device_probe() might result in loss of user data in the image. Maybe we should require the userland to wait for the image device before opening /dev/snapshot interface. Link: https://syzkaller.appspot.com/bug?extid=358c9ab4c93da7b7238c [1] Reported-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26bpf, devmap: Compute proper xdp_frame len redirecting framesLorenzo Bianconi
Even if it is currently forbidden to XDP_REDIRECT a multi-frag xdp_frame into a devmap, compute proper xdp_frame length in __xdp_enqueue and is_valid_dst routines running xdp_get_frame_len(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/894d99c01139e921bdb6868158ff8e67f661c072.1658596075.git.lorenzo@kernel.org
2022-07-25Merge branch irq/misc-5.20 into irq/irqchip-nextMarc Zyngier
* irq/misc-5.20: : . : Misc IRQ changes for 5.20: : : - Let irq_set_chip_handler_name_locked() take a const struct irq_chip * : : - Convert the ocelot irq_chip to being immutable (depends on the above) : : - Tidy-up the NOMAP irqdomain API variant : : - Teach action_show() to use for_each_action_of_desc() : : - Check ioremap() return value in the MIPS GIC driver : : - Move MMP driver init function declarations into the common .h : : - The obligatory typo fixes : . irqchip/mmp: Declare init functions in common header file irqchip/mips-gic: Check the return value of ioremap() in gic_of_init() genirq: Use for_each_action_of_desc in actions_show() irqdomain: Use hwirq_max instead of revmap_size for NOMAP domains irqdomain: Report irq number for NOMAP domains irqchip/gic-v3: Fix comment typo pinctrl: ocelot: Make irq_chip immutable genirq: Allow irq_set_chip_handler_name_locked() to take a const irq_chip Signed-off-by: Marc Zyngier <maz@kernel.org>
2022-07-24io_uring: move to separate directoryJens Axboe
In preparation for splitting io_uring up a bit, move it into its own top level directory. It didn't really belong in fs/ anyway, as it's not a file system only API. This adds io_uring/ and moves the core files in there, and updates the MAINTAINERS file for the new location. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-24Merge tag 'sched_urgent_for_v5.19_rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: "A single fix to correct a wrong BUG_ON() condition for deboosted tasks" * tag 'sched_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix BUG_ON condition for deboosted tasks