| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix "same task" check when redirecting event output
- Do not wait unconditionally for RCU on the event migration path if
there are no events to migrate
* tag 'perf_urgent_for_v6.3_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix the same task check in perf_event_set_output
perf: Optimize perf_pmu_migrate_context()
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- fix a braino in the swiotlb alignment check fix (Petr Tesarik)
* tag 'dma-mapping-6.3-2023-04-08' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix a braino in the alignment check fix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"A couple more minor fixes:
- Reset direct->addr back to its original value on error in updating
the direct trampoline code
- Make lastcmd_mutex static"
* tag 'trace-v6.3-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/synthetic: Make lastcmd_mutex static
ftrace: Fix issue that 'direct->addr' not restored in modify_ftrace_direct()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"28 hotfixes.
23 are cc:stable and the other five address issues which were
introduced during this merge cycle.
20 are for MM and the remainder are for other subsystems"
* tag 'mm-hotfixes-stable-2023-04-07-16-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
maple_tree: fix a potential concurrency bug in RCU mode
maple_tree: fix get wrong data_end in mtree_lookup_walk()
mm/swap: fix swap_info_struct race between swapoff and get_swap_pages()
nilfs2: fix sysfs interface lifetime
mm: take a page reference when removing device exclusive entries
mm: vmalloc: avoid warn_alloc noise caused by fatal signal
nilfs2: initialize "struct nilfs_binfo_dat"->bi_pad field
nilfs2: fix potential UAF of struct nilfs_sc_info in nilfs_segctor_thread()
zsmalloc: document freeable stats
zsmalloc: document new fullness grouping
fsdax: force clear dirty mark if CoW
mm/hugetlb: fix uffd wr-protection for CoW optimization path
mm: enable maple tree RCU mode by default
maple_tree: add RCU lock checking to rcu callback functions
maple_tree: add smp_rmb() to dead node detection
maple_tree: fix write memory barrier of nodes once dead for RCU mode
maple_tree: remove extra smp_wmb() from mas_dead_leaves()
maple_tree: fix freeing of nodes in rcu mode
maple_tree: detect dead nodes in mas_start()
maple_tree: be more cautious about dead nodes
...
|
|
The lastcmd_mutex is only used in trace_events_synth.c and should be
static.
Link: https://lore.kernel.org/linux-trace-kernel/202304062033.cRStgOuP-lkp@intel.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230406111033.6e26de93@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Fixes: 4ccf11c4e8a8e ("tracing/synthetic: Fix races on freeing last_cmd")
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Syzkaller report a WARNING: "WARN_ON(!direct)" in modify_ftrace_direct().
Root cause is 'direct->addr' was changed from 'old_addr' to 'new_addr' but
not restored if error happened on calling ftrace_modify_direct_caller().
Then it can no longer find 'direct' by that 'old_addr'.
To fix it, restore 'direct->addr' to 'old_addr' explicitly in error path.
Link: https://lore.kernel.org/linux-trace-kernel/20230330025223.1046087-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: <ast@kernel.org>
Cc: <daniel@iogearbox.net>
Fixes: 8a141dd7f706 ("ftrace: Fix modify_ftrace_direct.")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The alignment mask in swiotlb_do_find_slots() masks off the high
bits which are not relevant for the alignment, so multiple
requirements are combined with a bitwise OR rather than AND.
In plain English, the stricter the alignment, the more bits must
be set in iotlb_align_mask.
Confusion may arise from the fact that the same variable is also
used to mask off the offset within a swiotlb slot, which is
achieved with a bitwise AND.
Fixes: 0eee5ae10256 ("swiotlb: fix slot alignment checks")
Reported-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/all/CAA42JLa1y9jJ7BgQvXeUYQh-K2mDNHd2BYZ4iZUz33r5zY7oAQ@mail.gmail.com/
Reported-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Link: https://lore.kernel.org/all/20230405003549.GA21326@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net/
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use the maple tree in RCU mode for VMA tracking.
The maple tree tracks the stack and is able to update the pivot
(lower/upper boundary) in-place to allow the page fault handler to write
to the tree while holding just the mmap read lock. This is safe as the
writes to the stack have a guard VMA which ensures there will always be a
NULL in the direction of the growth and thus will only update a pivot.
It is possible, but not recommended, to have VMAs that grow up/down
without guard VMAs. syzbot has constructed a testcase which sets up a VMA
to grow and consume the empty space. Overwriting the entire NULL entry
causes the tree to be altered in a way that is not safe for concurrent
readers; the readers may see a node being rewritten or one that does not
match the maple state they are using.
Enabling RCU mode allows the concurrent readers to see a stable node and
will return the expected result.
[Liam.Howlett@Oracle.com: we don't need to free the nodes with RCU[
Link: https://lore.kernel.org/linux-mm/000000000000b0a65805f663ace6@google.com/
Link: https://lkml.kernel.org/r/20230227173632.3292573-9-surenb@google.com
Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+8d95422d3537159ca390@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When a tracing instance is removed, the error messages that hold errors
that occurred in the instance needs to be freed. The following reports a
memory leak:
# cd /sys/kernel/tracing
# mkdir instances/foo
# echo 'hist:keys=x' > instances/foo/events/sched/sched_switch/trigger
# cat instances/foo/error_log
[ 117.404795] hist:sched:sched_switch: error: Couldn't find field
Command: hist:keys=x
^
# rmdir instances/foo
Then check for memory leaks:
# echo scan > /sys/kernel/debug/kmemleak
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffff88810d8ec700 (size 192):
comm "bash", pid 869, jiffies 4294950577 (age 215.752s)
hex dump (first 32 bytes):
60 dd 68 61 81 88 ff ff 60 dd 68 61 81 88 ff ff `.ha....`.ha....
a0 30 8c 83 ff ff ff ff 26 00 0a 00 00 00 00 00 .0......&.......
backtrace:
[<00000000dae26536>] kmalloc_trace+0x2a/0xa0
[<00000000b2938940>] tracing_log_err+0x277/0x2e0
[<000000004a0e1b07>] parse_atom+0x966/0xb40
[<0000000023b24337>] parse_expr+0x5f3/0xdb0
[<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560
[<00000000293a9645>] trigger_process_regex+0x135/0x1a0
[<000000005c22b4f2>] event_trigger_write+0x87/0xf0
[<000000002cadc509>] vfs_write+0x162/0x670
[<0000000059c3b9be>] ksys_write+0xca/0x170
[<00000000f1cddc00>] do_syscall_64+0x3e/0xc0
[<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
unreferenced object 0xffff888170c35a00 (size 32):
comm "bash", pid 869, jiffies 4294950577 (age 215.752s)
hex dump (first 32 bytes):
0a 20 20 43 6f 6d 6d 61 6e 64 3a 20 68 69 73 74 . Command: hist
3a 6b 65 79 73 3d 78 0a 00 00 00 00 00 00 00 00 :keys=x.........
backtrace:
[<000000006a747de5>] __kmalloc+0x4d/0x160
[<000000000039df5f>] tracing_log_err+0x29b/0x2e0
[<000000004a0e1b07>] parse_atom+0x966/0xb40
[<0000000023b24337>] parse_expr+0x5f3/0xdb0
[<00000000594ad074>] event_hist_trigger_parse+0x27f8/0x3560
[<00000000293a9645>] trigger_process_regex+0x135/0x1a0
[<000000005c22b4f2>] event_trigger_write+0x87/0xf0
[<000000002cadc509>] vfs_write+0x162/0x670
[<0000000059c3b9be>] ksys_write+0xca/0x170
[<00000000f1cddc00>] do_syscall_64+0x3e/0xc0
[<00000000868ac68c>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
The problem is that the error log needs to be freed when the instance is
removed.
Link: https://lore.kernel.org/lkml/76134d9f-a5ba-6a0d-37b3-28310b4a1e91@alu.unizg.hr/
Link: https://lore.kernel.org/linux-trace-kernel/20230404194504.5790b95f@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Fixes: 2f754e771b1a6 ("tracing: Have the error logs show up in the proper instances")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The same task check in perf_event_set_output has some potential issues
for some usages.
For the current perf code, there is a problem if using of
perf_event_open() to have multiple samples getting into the same mmap’d
memory when they are both attached to the same process.
https://lore.kernel.org/all/92645262-D319-4068-9C44-2409EF44888E@gmail.com/
Because the event->ctx is not ready when the perf_event_set_output() is
invoked in the perf_event_open().
Besides the above issue, before the commit bd2756811766 ("perf: Rewrite
core context handling"), perf record can errors out when sampling with
a hardware event and a software event as below.
$ perf record -e cycles,dummy --per-thread ls
failed to mmap with 22 (Invalid argument)
That's because that prior to the commit a hardware event and a software
event are from different task context.
The problem should be a long time issue since commit c3f00c70276d
("perk: Separate find_get_context() from event initialization").
The task struct is stored in the event->hw.target for each per-thread
event. It is a more reliable way to determine whether two events are
attached to the same task.
The event->hw.target was also introduced several years ago by the
commit 50f16a8bf9d7 ("perf: Remove type specific target pointers"). It
can not only be used to fix the issue with the current code, but also
back port to fix the issues with an older kernel.
Note: The event->hw.target was introduced later than commit
c3f00c70276d. The patch may cannot be applied between the commit
c3f00c70276d and commit 50f16a8bf9d7. Anybody that wants to back-port
this at that period may have to find other solutions.
Fixes: c3f00c70276d ("perf: Separate find_get_context() from event initialization")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lkml.kernel.org/r/20230322202449.512091-1-kan.liang@linux.intel.com
|
|
Thomas reported that offlining CPUs spends a lot of time in
synchronize_rcu() as called from perf_pmu_migrate_context() even though
he's not actually using uncore events.
Turns out, the thing is unconditionally waiting for RCU, even if there's
no actual events to migrate.
Fixes: 0cda4c023132 ("perf: Introduce perf_pmu_migrate_context()")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/20230403090858.GT4253@hirez.programming.kicks-ass.net
|
|
The kernel command line ftrace_boot_snapshot by itself is supposed to
trigger a snapshot at the end of boot up of the main top level trace
buffer. A ftrace_boot_snapshot=foo will do the same for an instance called
foo that was created by trace_instance=foo,...
The logic was broken where if ftrace_boot_snapshot was by itself, it would
trigger a snapshot for all instances that had tracing enabled, regardless
if it asked for a snapshot or not.
When a snapshot is requested for a buffer, the buffer's
tr->allocated_snapshot is set to true. Use that to know if a trace buffer
wants a snapshot at boot up or not.
Since the top level buffer is part of the ftrace_trace_arrays list,
there's no reason to treat it differently than the other buffers. Just
iterate the list if ftrace_boot_snapshot was specified.
Link: https://lkml.kernel.org/r/20230405022341.895334039@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <zwisler@google.com>
Fixes: 9c1c251d670bc ("tracing: Allow boot instances to have snapshot buffers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
appropriate instance
If a trace instance has a failure with its snapshot code, the error
message is to be written to that instance's buffer. But currently, the
message is written to the top level buffer. Worse yet, it may also disable
the top level buffer and not the instance that had the issue.
Link: https://lkml.kernel.org/r/20230405022341.688730321@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <zwisler@google.com>
Fixes: 2824f50332486 ("tracing: Make the snapshot trigger work with instances")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
osnoise/timerlat tracers are reporting new max latency on instances
where the tracing is off, creating inconsistencies between the max
reported values in the trace and in the tracing_max_latency. Thus
only report new tracing_max_latency on active tracing instances.
Link: https://lkml.kernel.org/r/ecd109fde4a0c24ab0f00ba1e9a144ac19a91322.1680104184.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes: dae181349f1e ("tracing/osnoise: Support a list of trace_array *tr")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
timerlat is not reporting a new tracing_max_latency for the thread
latency. The reason is that it is not calling notify_new_max_latency()
function after the new thread latency is sampled.
Call notify_new_max_latency() after computing the thread latency.
Link: https://lkml.kernel.org/r/16e18d61d69073d0192ace07bf61e405cca96e9c.1680104184.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Fixes: dae181349f1e ("tracing/osnoise: Support a list of trace_array *tr")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When user reads file 'trace_pipe', kernel keeps printing following logs
that warn at "cpu_buffer->reader_page->read > rb_page_size(reader)" in
rb_get_reader_page(). It just looks like there's an infinite loop in
tracing_read_pipe(). This problem occurs several times on arm64 platform
when testing v5.10 and below.
Call trace:
rb_get_reader_page+0x248/0x1300
rb_buffer_peek+0x34/0x160
ring_buffer_peek+0xbc/0x224
peek_next_entry+0x98/0xbc
__find_next_entry+0xc4/0x1c0
trace_find_next_entry_inc+0x30/0x94
tracing_read_pipe+0x198/0x304
vfs_read+0xb4/0x1e0
ksys_read+0x74/0x100
__arm64_sys_read+0x24/0x30
el0_svc_common.constprop.0+0x7c/0x1bc
do_el0_svc+0x2c/0x94
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb4
el0_sync+0x160/0x180
Then I dump the vmcore and look into the problematic per_cpu ring_buffer,
I found that tail_page/commit_page/reader_page are on the same page while
reader_page->read is obviously abnormal:
tail_page == commit_page == reader_page == {
.write = 0x100d20,
.read = 0x8f9f4805, // Far greater than 0xd20, obviously abnormal!!!
.entries = 0x10004c,
.real_end = 0x0,
.page = {
.time_stamp = 0x857257416af0,
.commit = 0xd20, // This page hasn't been full filled.
// .data[0...0xd20] seems normal.
}
}
The root cause is most likely the race that reader and writer are on the
same page while reader saw an event that not fully committed by writer.
To fix this, add memory barriers to make sure the reader can see the
content of what is committed. Since commit a0fcaaed0c46 ("ring-buffer: Fix
race between reset page and reading page") has added the read barrier in
rb_get_reader_page(), here we just need to add the write barrier.
Link: https://lore.kernel.org/linux-trace-kernel/20230325021247.2923907-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: 77ae365eca89 ("ring-buffer: make lockless")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently, the "last_cmd" variable can be accessed by multiple processes
asynchronously when multiple users manipulate synthetic_events node
at the same time, it could lead to use-after-free or double-free.
This patch add "lastcmd_mutex" to prevent "last_cmd" from being accessed
asynchronously.
================================================================
It's easy to reproduce in the KASAN environment by running the two
scripts below in different shells.
script 1:
while :
do
echo -n -e '\x88' > /sys/kernel/tracing/synthetic_events
done
script 2:
while :
do
echo -n -e '\xb0' > /sys/kernel/tracing/synthetic_events
done
================================================================
double-free scenario:
process A process B
------------------- ---------------
1.kstrdup last_cmd
2.free last_cmd
3.free last_cmd(double-free)
================================================================
use-after-free scenario:
process A process B
------------------- ---------------
1.kstrdup last_cmd
2.free last_cmd
3.tracing_log_err(use-after-free)
================================================================
Appendix 1. KASAN report double-free:
BUG: KASAN: double-free in kfree+0xdc/0x1d4
Free of addr ***** by task sh/4879
Call trace:
...
kfree+0xdc/0x1d4
create_or_delete_synth_event+0x60/0x1e8
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
Allocated by task 4879:
...
kstrdup+0x5c/0x98
create_or_delete_synth_event+0x6c/0x1e8
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
Freed by task 5464:
...
kfree+0xdc/0x1d4
create_or_delete_synth_event+0x60/0x1e8
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
================================================================
Appendix 2. KASAN report use-after-free:
BUG: KASAN: use-after-free in strlen+0x5c/0x7c
Read of size 1 at addr ***** by task sh/5483
sh: CPU: 7 PID: 5483 Comm: sh
...
__asan_report_load1_noabort+0x34/0x44
strlen+0x5c/0x7c
tracing_log_err+0x60/0x444
create_or_delete_synth_event+0xc4/0x204
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
Allocated by task 5483:
...
kstrdup+0x5c/0x98
create_or_delete_synth_event+0x80/0x204
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
Freed by task 5480:
...
kfree+0xdc/0x1d4
create_or_delete_synth_event+0x74/0x204
trace_parse_run_command+0x2bc/0x4b8
synth_events_write+0x20/0x30
vfs_write+0x200/0x830
...
Link: https://lore.kernel.org/linux-trace-kernel/20230321110444.1587-1-Tze-nan.Wu@mediatek.com
Fixes: 27c888da9867 ("tracing: Remove size restriction on synthetic event cmd error logging")
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: "Tom Zanussi" <zanussi@kernel.org>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- fix for swiotlb deadlock due to wrong alignment checks (GuoRui.Yu,
Petr Tesarik)
* tag 'dma-mapping-6.3-2023-03-31' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix slot alignment checks
swiotlb: use wrap_area_index() instead of open-coding it
swiotlb: fix the deadlock in swiotlb_do_find_slots
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Fix a corner case where vruntime of a task is not being sanitized
* tag 'sched_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Sanitize vruntime of entity being migrated
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Borislav Petkov:
- Do the delayed RCU wakeup for kthreads in the proper order so that
former doesn't get ignored
- A noinstr warning fix
* tag 'core_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-up
entry: Fix noinstr warning in __enter_from_user_mode()
|
|
Pull xfs percpu counter fixes from Darrick Wong:
"We discovered a filesystem summary counter corruption problem that was
traced to cpu hot-remove racing with the call to percpu_counter_sum
that sets the free block count in the superblock when writing it to
disk. The root cause is that percpu_counter_sum doesn't cull from
dying cpus and hence misses those counter values if the cpu shutdown
hooks have not yet run to merge the values.
I'm hoping this is a fairly painless fix to the problem, since the
dying cpu mask should generally be empty. It's been in for-next for a
week without any complaints from the bots.
- Fix a race in the percpu counters summation code where the
summation failed to add in the values for any CPUs that were dying
but not yet dead. This fixes some minor discrepancies and incorrect
assertions when running generic/650"
* tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
pcpcntr: remove percpu_counter_sum_all()
fork: remove use of percpu_counter_sum_all
pcpcntrs: fix dying cpu summation race
cpumask: introduce for_each_cpu_or
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes, 8 of which are cc:stable. 11 are for MM, the remainder
are for other subsystems"
* tag 'mm-hotfixes-stable-2023-03-24-17-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm: mmap: remove newline at the end of the trace
mailmap: add entries for Richard Leitner
kcsan: avoid passing -g for test
kfence: avoid passing -g for test
mm: kfence: fix using kfence_metadata without initialization in show_object()
lib: dhry: fix unstable smp_processor_id(_) usage
mailmap: add entry for Enric Balletbo i Serra
mailmap: map Sai Prakash Ranjan's old address to his current one
mailmap: map Rajendra Nayak's old address to his current one
Revert "kasan: drop skip_kasan_poison variable in free_pages_prepare"
mailmap: add entry for Tobias Klauser
kasan, powerpc: don't rename memintrinsics if compiler adds prefixes
mm/ksm: fix race with VMA iteration and mm_struct teardown
kselftest: vm: fix unused variable warning
mm: fix error handling for map_deny_write_exec
mm: deduplicate error handling for map_deny_write_exec
checksyscalls: ignore fstat to silence build warning on LoongArch
nilfs2: fix kernel-infoleak in nilfs_ioctl_wrap_copy()
test_maple_tree: add more testing for mas_empty_area()
maple_tree: fix mas_skip_node() end slot detection
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi and bluetooth.
Current release - regressions:
- wifi: mt76: mt7915: add back 160MHz channel width support for
MT7915
- libbpf: revert poisoning of strlcpy, it broke uClibc-ng
Current release - new code bugs:
- bpf: improve the coverage of the "allow reads from uninit stack"
feature to fix verification complexity problems
- eth: am65-cpts: reset PPS genf adj settings on enable
Previous releases - regressions:
- wifi: mac80211: serialize ieee80211_handle_wake_tx_queue()
- wifi: mt76: do not run mt76_unregister_device() on unregistered hw,
fix null-deref
- Bluetooth: btqcomsmd: fix command timeout after setting BD address
- eth: igb: revert rtnl_lock() that causes a deadlock
- dsa: mscc: ocelot: fix device specific statistics
Previous releases - always broken:
- xsk: add missing overflow check in xdp_umem_reg()
- wifi: mac80211:
- fix QoS on mesh interfaces
- fix mesh path discovery based on unicast packets
- Bluetooth:
- ISO: fix timestamped HCI ISO data packet parsing
- remove "Power-on" check from Mesh feature
- usbnet: more fixes to drivers trusting packet length
- wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
- Bluetooth: btintel: iterate only bluetooth device ACPI entries
- eth: iavf: fix inverted Rx hash condition leading to disabled hash
- eth: igc: fix the validation logic for taprio's gate list
- dsa: tag_brcm: legacy: fix daisy-chained switches
Misc:
- bpf: adjust insufficient default bpf_jit_limit to account for
growth of BPF use over the last 5 years
- xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating
no driver support"
* tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
Bluetooth: HCI: Fix global-out-of-bounds
Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
Bluetooth: L2CAP: Fix responding with wrong PDU type
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
Bluetooth: btinel: Check ACPI handle for NULL before accessing
net: mdio: thunder: Add missing fwnode_handle_put()
net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case
net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()
net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()
net: asix: fix modprobe "sysfs: cannot create duplicate filename"
gve: Cache link_speed value from device
tools: ynl: Fix genlmsg header encoding formats
net: enetc: fix aggregate RMON counters not showing the ranges
Bluetooth: Remove "Power-on" check from Mesh feature
Bluetooth: Fix race condition in hci_cmd_sync_clear
Bluetooth: btintel: Iterate only bluetooth device ACPI entries
Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
Bluetooth: btusb: Remove detection of ISO packets over bulk
Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
...
|
|
Nathan reported that when building with GNU as and a version of clang that
defaults to DWARF5, the assembler will complain with:
Error: non-constant .uleb128 is not supported
This is because `-g` defaults to the compiler debug info default. If the
assembler does not support some of the directives used, the above errors
occur. To fix, remove the explicit passing of `-g`.
All the test wants is that stack traces print valid function names, and
debug info is not required for that. (I currently cannot recall why I
added the explicit `-g`.)
Link: https://lkml.kernel.org/r/20230316224705.709984-2-elver@google.com
Fixes: 1fe84fd4a402 ("kcsan: Add test suite")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-03-23
We've added 8 non-merge commits during the last 13 day(s) which contain
a total of 21 files changed, 238 insertions(+), 161 deletions(-).
The main changes are:
1) Fix verification issues in some BPF programs due to their stack usage
patterns, from Eduard Zingerman.
2) Fix to add missing overflow checks in xdp_umem_reg and return an error
in such case, from Kal Conley.
3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for
libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia.
4) Fix insufficient bpf_jit_limit default to avoid users running into hard
to debug seccomp BPF errors, from Daniel Borkmann.
5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc
to make it unambiguous from other errors, from Jesper Dangaard Brouer.
6) Two BPF selftest fixes to address compilation errors from recent changes
in kernel structures, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support
bpf: Adjust insufficient default bpf_jit_limit
xsk: Add missing overflow check in xdp_umem_reg
selftests/bpf: Fix progs/test_deny_namespace.c issues.
selftests/bpf: Fix progs/find_vma_fail1.c build error.
libbpf: Revert poisoning of strlcpy
selftests/bpf: Tests for uninitialized stack reads
bpf: Allow reads from uninit stack
====================
Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Explicit alignment and page alignment are used only to calculate
the stride, not when checking actual slot physical address.
Originally, only page alignment was implemented, and that worked,
because the whole SWIOTLB is allocated on a page boundary, so
aligning the start index was sufficient to ensure a page-aligned
slot.
When commit 1f221a0d0dbf ("swiotlb: respect min_align_mask") added
support for min_align_mask, the index could be incremented in the
search loop, potentially finding an unaligned slot if minimum device
alignment is between IO_TLB_SIZE and PAGE_SIZE. The bug could go
unnoticed, because the slot size is 2 KiB, and the most common page
size is 4 KiB, so there is no alignment value in between.
IIUC the intention has been to find a slot that conforms to all
alignment constraints: device minimum alignment, an explicit
alignment (given as function parameter) and optionally page
alignment (if allocation size is >= PAGE_SIZE). The most
restrictive mask can be trivially computed with logical AND. The
rest can stay.
Fixes: 1f221a0d0dbf ("swiotlb: respect min_align_mask")
Fixes: e81e99bacc9f ("swiotlb: Support aligned swiotlb buffers")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
No functional change, just use an existing helper.
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We've seen recent AWS EKS (Kubernetes) user reports like the following:
After upgrading EKS nodes from v20230203 to v20230217 on our 1.24 EKS
clusters after a few days a number of the nodes have containers stuck
in ContainerCreating state or liveness/readiness probes reporting the
following error:
Readiness probe errored: rpc error: code = Unknown desc = failed to
exec in container: failed to start exec "4a11039f730203ffc003b7[...]":
OCI runtime exec failed: exec failed: unable to start container process:
unable to init seccomp: error loading seccomp filter into kernel:
error loading seccomp filter: errno 524: unknown
However, we had not been seeing this issue on previous AMIs and it only
started to occur on v20230217 (following the upgrade from kernel 5.4 to
5.10) with no other changes to the underlying cluster or workloads.
We tried the suggestions from that issue (sysctl net.core.bpf_jit_limit=452534528)
which helped to immediately allow containers to be created and probes to
execute but after approximately a day the issue returned and the value
returned by cat /proc/vmallocinfo | grep bpf_jit | awk '{s+=$2} END {print s}'
was steadily increasing.
I tested bpf tree to observe bpf_jit_charge_modmem, bpf_jit_uncharge_modmem
their sizes passed in as well as bpf_jit_current under tcpdump BPF filter,
seccomp BPF and native (e)BPF programs, and the behavior all looks sane
and expected, that is nothing "leaking" from an upstream perspective.
The bpf_jit_limit knob was originally added in order to avoid a situation
where unprivileged applications loading BPF programs (e.g. seccomp BPF
policies) consuming all the module memory space via BPF JIT such that loading
of kernel modules would be prevented. The default limit was defined back in
2018 and while good enough back then, we are generally seeing far more BPF
consumers today.
Adjust the limit for the BPF JIT pool from originally 1/4 to now 1/2 of the
module memory space to better reflect today's needs and avoid more users
running into potentially hard to debug issues.
Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Reported-by: Stephen Haynes <sh@synk.net>
Reported-by: Lefteris Alexakis <lefteris.alexakis@kpn.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://github.com/awslabs/amazon-eks-ami/issues/1179
Link: https://github.com/awslabs/amazon-eks-ami/issues/1219
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230320143725.8394-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
RCU sometimes needs to perform a delayed wake up for specific kthreads
handling offloaded callbacks (RCU_NOCB). These wakeups are performed
by timers and upon entry to idle (also to guest and to user on nohz_full).
However the delayed wake-up on kernel exit is actually performed after
the thread flags are fetched towards the fast path check for work to
do on exit to user. As a result, and if there is no other pending work
to do upon that kernel exit, the current task will resume to userspace
with TIF_RESCHED set and the pending wake up ignored.
Fix this with fetching the thread flags _after_ the delayed RCU-nocb
kthread wake-up.
Fixes: 47b8ff194c1f ("entry: Explicitly flush pending rcuog wakeup before last rescheduling point")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230315194349.10798-3-joel@joelfernandes.org
|
|
Commit 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed")
fixes an overflowing bug, but ignore a case that se->exec_start is reset
after a migration.
For fixing this case, we delay the reset of se->exec_start after
placing the entity which se->exec_start to detect long sleeping task.
In order to take into account a possible divergence between the clock_task
of 2 rqs, we increase the threshold to around 104 days.
Fixes: 829c1651e9c4 ("sched/fair: sanitize vruntime of entity being placed")
Originally-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Qiao <zhangqiao22@huawei.com>
Link: https://lore.kernel.org/r/20230317160810.107988-1-vincent.guittot@linaro.org
|
|
__enter_from_user_mode() is triggering noinstr warnings with
CONFIG_DEBUG_PREEMPT due to its call of preempt_count_add() via
ct_state().
The preemption disable isn't needed as interrupts are already disabled.
And the context_tracking_enabled() check in ct_state() also isn't needed
as that's already being done by the CT_WARN_ON().
Just use __ct_state() instead.
Fixes the following warnings:
vmlinux.o: warning: objtool: enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0xf9: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0xc7: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section
Fixes: 171476775d32 ("context_tracking: Convert state to atomic_t")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/d8955fa6d68dc955dda19baf13ae014ae27926f5.1677369694.git.jpoimboe@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead
- Fix per cpu thread management of the hwlat tracer:
- Do not start per_cpu threads if one is already running for the CPU
- When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to the result
of the call from kprobe_event_delete(), which would likely succeed,
and thus have the function return success
- Fix splice() reads from the trace file that was broken by commit
36e2c7421f02 ("fs: don't allow splice read/write without explicit
ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags for
tricks to optimize, which was shortly removed due to them being
tricks. But a comment for those tricks remained
- Set local functions and variables to static
* tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
ring-buffer: remove obsolete comment for free_buffer_page()
tracing: Make splice_read available again
ftrace: Set direct_ops storage-class-specifier to static
trace/hwlat: Do not start per-cpu thread if it is already running
trace/hwlat: Do not wipe the contents of per-cpu thread data
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
tracing: Fix wrong return in kprobe_event_gen_test.c
|
|
There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.
Test case:
# cd /sys/kernel/tracing
# echo 0 > tracing_on
# echo round-robin > hwlat_detector/mode
# echo hwlat > current_tracer
# unshare --fork --pid bash -c 'echo 1 > tracing_on'
# dmesg -c
Actual behavior:
[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none
Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0330f7aa8ee63 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The comment refers to mm/slob.c which is being removed. It comes from
commit ed56829cb319 ("ring_buffer: reset buffer page when freeing") and
according to Steven the borrowed code was a page mapcount and mapping
reset, which was later removed by commit e4c2ce82ca27 ("ring_buffer:
allocate buffer page pointer"). Thus the comment is not accurate anyway,
remove it.
Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Mike Rapoport <mike.rapoport@gmail.com>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fixes: e4c2ce82ca27 ("ring_buffer: allocate buffer page pointer")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since the commit 36e2c7421f02 ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.
This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.
Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com
Cc: stable@vger.kernel.org
Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This effectively reverts the change made in commit f689054aace2
("percpu_counter: add percpu_counter_sum_all interface") as the
race condition percpu_counter_sum_all() was invented to avoid is
now handled directly in percpu_counter_sum() and nobody needs to
care about summing racing with cpu unplug anymore.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Check whether sibling events have been deactivated before adding them
to groups
- Update the proper event time tracking variable depending on the event
type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
* tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix check before add_event_to_groups() in perf_group_detach()
perf: fix perf_event_context->time
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
|
|
smatch reports this warning
kernel/trace/ftrace.c:2594:19: warning:
symbol 'direct_ops' was not declared. Should it be static?
The variable direct_ops is only used in ftrace.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The hwlatd tracer will end up starting multiple per-cpu threads with
the following script:
#!/bin/sh
cd /sys/kernel/debug/tracing
echo 0 > tracing_on
echo hwlat > current_tracer
echo per-cpu > hwlat_detector/mode
echo 100000 > hwlat_detector/width
echo 200000 > hwlat_detector/window
echo 1 > tracing_on
To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.
Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: f46b16520a087 ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Do not wipe the contents of the per-cpu kthread data when starting the
tracer, as this will completely forget about already running instances
and can later start new additional per-cpu threads.
Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-2-tero.kristo@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: f46b16520a087 ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
storage-class-specifier to static
smatch reports several similar warnings
kernel/trace/trace_osnoise.c:220:1: warning:
symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:243:1: warning:
symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:335:14: warning:
symbol 'interface_lock' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2242:5: warning:
symbol 'timerlat_min_period' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2243:5: warning:
symbol 'timerlat_max_period' was not declared. Should it be static?
These variables are only used in trace_osnoise.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230309150414.4036764-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Overwriting the error code with the deletion result may cause the
function to return 0 despite encountering an error. Commit b111545d26c0
("tracing: Remove the useless value assignment in
test_create_synth_event()") solves a similar issue by
returning the original error code, so this patch does the same.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-trace-kernel/20230131075818.5322-1-aagusev@ispras.ru
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Events should only be added to a groups rb tree if they have not been
removed from their context by list_del_event(). Since remove_on_exec
made it possible to call list_del_event() on individual events before
they are detached from their group, perf_group_detach() should check each
sibling's attach_state before calling add_event_to_groups() on it.
Fixes: 2e498d0a74e5 ("perf: Add support for event removal on exec")
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ZBFzvQV9tEqoHEtH@gentoo
|
|
Time readers rely on perf_event_context->[time|timestamp|timeoffset] to get
accurate time_enabled and time_running for an event. The difference between
ctx->timestamp and ctx->time is the among of time when the context is not
enabled. __update_context_time(ctx, false) is used to increase timestamp,
but not time. Therefore, it should only be called in ctx_sched_in() when
EVENT_TIME was not enabled.
Fixes: 09f5e7dc7ad7 ("perf: Fix perf_event_read_local() time")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20230313171608.298734-1-song@kernel.org
|
|
perf_event_bpf_output
syzkaller reportes a KASAN issue with stack-out-of-bounds.
The call trace is as follows:
dump_stack+0x9c/0xd3
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
__perf_event_header__init_id+0x34/0x290
perf_event_header__init_id+0x48/0x60
perf_output_begin+0x4a4/0x560
perf_event_bpf_output+0x161/0x1e0
perf_iterate_sb_cpu+0x29e/0x340
perf_iterate_sb+0x4c/0xc0
perf_event_bpf_event+0x194/0x2c0
__bpf_prog_put.constprop.0+0x55/0xf0
__cls_bpf_delete_prog+0xea/0x120 [cls_bpf]
cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf]
process_one_work+0x3c2/0x730
worker_thread+0x93/0x650
kthread+0x1b8/0x210
ret_from_fork+0x1f/0x30
commit 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
use on-stack struct perf_sample_data of the caller function.
However, perf_event_bpf_output uses incorrect parameter to convert
small-sized data (struct perf_bpf_event) into large-sized data
(struct perf_sample_data), which causes memory overwriting occurs in
__perf_event_header__init_id.
Fixes: 267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230314044735.56551-1-yangjihong1@huawei.com
|
|
In general, if swiotlb is sufficient, the logic of index =
wrap_area_index(mem, index + 1) is fine, it will quickly take a slot and
release the area->lock; But if swiotlb is insufficient and the device
has min_align_mask requirements, such as NVME, we may not be able to
satisfy index == wrap and exit the loop properly. In this case, other
kernel threads will not be able to acquire the area->lock and release
the slot, resulting in a deadlock.
The current implementation of wrap_area_index does not involve a modulo
operation, so adjusting the wrap to ensure the loop ends is not trivial.
Introduce a new variable to record the number of loops and exit the loop
after completing the traversal.
Backtraces:
Other CPUs are waiting this core to exit the swiotlb_do_find_slots
loop.
[10199.924391] RIP: 0010:swiotlb_do_find_slots+0x1fe/0x3e0
[10199.924403] Call Trace:
[10199.924404] <TASK>
[10199.924405] swiotlb_tbl_map_single+0xec/0x1f0
[10199.924407] swiotlb_map+0x5c/0x260
[10199.924409] ? nvme_pci_setup_prps+0x1ed/0x340
[10199.924411] dma_direct_map_page+0x12e/0x1c0
[10199.924413] nvme_map_data+0x304/0x370
[10199.924415] nvme_prep_rq.part.0+0x31/0x120
[10199.924417] nvme_queue_rq+0x77/0x1f0
...
[ 9639.596311] NMI backtrace for cpu 48
[ 9639.596336] Call Trace:
[ 9639.596337]
[ 9639.596338] _raw_spin_lock_irqsave+0x37/0x40
[ 9639.596341] swiotlb_do_find_slots+0xef/0x3e0
[ 9639.596344] swiotlb_tbl_map_single+0xec/0x1f0
[ 9639.596347] swiotlb_map+0x5c/0x260
[ 9639.596349] dma_direct_map_sg+0x7a/0x280
[ 9639.596352] __dma_map_sg_attrs+0x30/0x70
[ 9639.596355] dma_map_sgtable+0x1d/0x30
[ 9639.596356] nvme_map_data+0xce/0x370
...
[ 9639.595665] NMI backtrace for cpu 50
[ 9639.595682] Call Trace:
[ 9639.595682]
[ 9639.595683] _raw_spin_lock_irqsave+0x37/0x40
[ 9639.595686] swiotlb_release_slots.isra.0+0x86/0x180
[ 9639.595688] dma_direct_unmap_sg+0xcf/0x1a0
[ 9639.595690] nvme_unmap_data.part.0+0x43/0xc0
Fixes: 1f221a0d0dbf ("swiotlb: respect min_align_mask")
Signed-off-by: GuoRui.Yu <GuoRui.Yu@linux.alibaba.com>
Signed-off-by: Xiaokang Hu <xiaokang.hxk@alibaba-inc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The getaffinity() system call uses 'cpumask_size()' to decide how big
the CPU mask is - so far so good. It is indeed the allocation size of a
cpumask.
But the code also assumes that the whole allocation is initialized
without actually doing so itself. That's wrong, because we might have
fixed-size allocations (making copying and clearing more efficient), but
not all of it is then necessarily used if 'nr_cpu_ids' is smaller.
Having checked other users of 'cpumask_size()', they all seem to be ok,
either using it purely for the allocation size, or explicitly zeroing
the cpumask before using the size in bytes to copy it.
See for example the ublk_ctrl_get_queue_affinity() function that uses
the proper 'zalloc_cpumask_var()' to make sure that the whole mask is
cleared, whether the storage is on the stack or if it was an external
allocation.
Fix this by just zeroing the allocation before using it. Do the same
for the compat version of sched_getaffinity(), which had the same logic.
Also, for consistency, make sched_getaffinity() use 'cpumask_bits()' to
access the bits. For a cpumask_var_t, it ends up being a pointer to the
same data either way, but it's just a good idea to treat it like you
would a 'cpumask_t'. The compat case already did that.
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/lkml/7d026744-6bd6-6827-0471-b5e8eae0be3f@arm.com/
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Do not allow histogram values to have modifies. They can cause a NULL
pointer dereference if they do.
- Warn if hist_field_name() is passed a NULL. Prevent the NULL pointer
dereference mentioned above.
- Fix invalid address look up race in lookup_rec()
- Define ftrace_stub_graph conditionally to prevent linker errors
- Always check if RCU is watching at all tracepoint locations
* tag 'trace-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Make tracepoint lockdep check actually test something
ftrace,kcfi: Define ftrace_stub_graph conditionally
ftrace: Fix invalid address access in lookup_rec() when index is 0
tracing: Check field value in hist_field_name()
tracing: Do not let histogram values have some modifiers
|
|
Merge commit bf9bec4cb3a4 ("Merge branch 'bpf: Allow reads from uninit stack'")
from bpf-next to bpf tree to address verification issues in some programs
due to stack usage.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
|
