| Age | Commit message (Collapse) | Author |
|---|
|
commit e82553c10b0899994153f9bf0af333c0a1550fd7 upstream.
This reverts commit 536d3bf261a2fc3b05b3e91e7eef7383443015cf, as it can
cause writers to memory.high to get stuck in the kernel forever,
performing page reclaim and consuming excessive amounts of CPU cycles.
Before the patch, a write to memory.high would first put the new limit
in place for the workload, and then reclaim the requested delta. After
the patch, the kernel tries to reclaim the delta before putting the new
limit into place, in order to not overwhelm the workload with a sudden,
large excess over the limit. However, if reclaim is actively racing
with new allocations from the uncurbed workload, it can keep the write()
working inside the kernel indefinitely.
This is causing problems in Facebook production. A privileged
system-level daemon that adjusts memory.high for various workloads
running on a host can get unexpectedly stuck in the kernel and
essentially turn into a sort of involuntary kswapd for one of the
workloads. We've observed that daemon busy-spin in a write() for
minutes at a time, neglecting its other duties on the system, and
expending privileged system resources on behalf of a workload.
To remedy this, we have first considered changing the reclaim logic to
break out after a couple of loops - whether the workload has converged
to the new limit or not - and bound the write() call this way. However,
the root cause that inspired the sequence change in the first place has
been fixed through other means, and so a revert back to the proven
limit-setting sequence, also used by memory.max, is preferable.
The sequence was changed to avoid extreme latencies in the workload when
the limit was lowered: the sudden, large excess created by the limit
lowering would erroneously trigger the penalty sleeping code that is
meant to throttle excessive growth from below. Allocating threads could
end up sleeping long after the write() had already reclaimed the delta
for which they were being punished.
However, erroneous throttling also caused problems in other scenarios at
around the same time. This resulted in commit b3ff92916af3 ("mm, memcg:
reclaim more aggressively before high allocator throttling"), included
in the same release as the offending commit. When allocating threads
now encounter large excess caused by a racing write() to memory.high,
instead of entering punitive sleeps, they will simply be tasked with
helping reclaim down the excess, and will be held no longer than it
takes to accomplish that. This is in line with regular limit
enforcement - i.e. if the workload allocates up against or over an
otherwise unchanged limit from below.
With the patch breaking userspace, and the root cause addressed by other
means already, revert it again.
Link: https://lkml.kernel.org/r/20210122184341.292461-1-hannes@cmpxchg.org
Fixes: 536d3bf261a2 ("mm: memcontrol: avoid workload stalls when lowering memory.high")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit da74240eb3fcd806edb1643874363e954d9e948b upstream.
Commit 3fea5a499d57 ("mm: memcontrol: convert page cache to a new
mem_cgroup_charge() API") introduced a bug in __add_to_page_cache_locked()
causing the following splat:
page dumped because: VM_BUG_ON_PAGE(page_memcg(page))
pages's memcg:ffff8889a4116000
------------[ cut here ]------------
kernel BUG at mm/memcontrol.c:2924!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 35 PID: 12345 Comm: cat Tainted: G S W I 5.11.0-rc4-debug+ #1
Hardware name: HP HP Z8 G4 Workstation/81C7, BIOS P60 v01.25 12/06/2017
RIP: commit_charge+0xf4/0x130
Call Trace:
mem_cgroup_charge+0x175/0x770
__add_to_page_cache_locked+0x712/0xad0
add_to_page_cache_lru+0xc5/0x1f0
cachefiles_read_or_alloc_pages+0x895/0x2e10 [cachefiles]
__fscache_read_or_alloc_pages+0x6c0/0xa00 [fscache]
__nfs_readpages_from_fscache+0x16d/0x630 [nfs]
nfs_readpages+0x24e/0x540 [nfs]
read_pages+0x5b1/0xc40
page_cache_ra_unbounded+0x460/0x750
generic_file_buffered_read_get_pages+0x290/0x1710
generic_file_buffered_read+0x2a9/0xc30
nfs_file_read+0x13f/0x230 [nfs]
new_sync_read+0x3af/0x610
vfs_read+0x339/0x4b0
ksys_read+0xf1/0x1c0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Before that commit, there was a try_charge() and commit_charge() in
__add_to_page_cache_locked(). These two separated charge functions were
replaced by a single mem_cgroup_charge(). However, it forgot to add a
matching mem_cgroup_uncharge() when the xarray insertion failed with the
page released back to the pool.
Fix this by adding a mem_cgroup_uncharge() call when insertion error
happens.
Link: https://lkml.kernel.org/r/20210125042441.20030-1-longman@redhat.com
Fixes: 3fea5a499d57 ("mm: memcontrol: convert page cache to a new mem_cgroup_charge() API")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <smuchun@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c2f67308af4c102b4e1e6cd6f69819ae59408e0 upstream.
Sergey reported deadlock between kswapd correctly doing its usual
lock_page(page) followed by down_read(page->mapping->i_mmap_rwsem), and
madvise(MADV_REMOVE) on an madvise(MADV_HUGEPAGE) area doing
down_write(page->mapping->i_mmap_rwsem) followed by lock_page(page).
This happened when shmem_fallocate(punch hole)'s unmap_mapping_range()
reaches zap_pmd_range()'s call to __split_huge_pmd(). The same deadlock
could occur when partially truncating a mapped huge tmpfs file, or using
fallocate(FALLOC_FL_PUNCH_HOLE) on it.
__split_huge_pmd()'s page lock was added in 5.8, to make sure that any
concurrent use of reuse_swap_page() (holding page lock) could not catch
the anon THP's mapcounts and swapcounts while they were being split.
Fortunately, reuse_swap_page() is never applied to a shmem or file THP
(not even by khugepaged, which checks PageSwapCache before calling), and
anonymous THPs are never created in shmem or file areas: so that
__split_huge_pmd()'s page lock can only be necessary for anonymous THPs,
on which there is no risk of deadlock with i_mmap_rwsem.
Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101161409470.2022@eggly.anvils
Fixes: c444eb564fb1 ("mm: thp: make the THP mapcount atomic against __split_huge_pmd_locked()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74e21484e40bb8ce0f9828bbfe1c9fc9b04249c6 upstream.
In fast_isolate_freepages, high_pfn will be used if a prefered one (ie
PFN >= low_fn) not found.
But the high_pfn is not reset before searching an free area, so when it
was used as freepage, it may from another free area searched before. As
a result move_freelist_head(freelist, freepage) will have unexpected
behavior (eg corrupt the MOVABLE freelist)
Unable to handle kernel paging request at virtual address dead000000000200
Mem abort info:
ESR = 0x96000044
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000044
CM = 0, WnR = 1
[dead000000000200] address between user and kernel address ranges
-000|list_cut_before(inline)
-000|move_freelist_head(inline)
-000|fast_isolate_freepages(inline)
-000|isolate_freepages(inline)
-000|compaction_alloc(?, ?)
-001|unmap_and_move(inline)
-001|migrate_pages([NSD:0xFFFFFF80088CBBD0] from = 0xFFFFFF80088CBD88, [NSD:0xFFFFFF80088CBBC8] get_new_p
-002|__read_once_size(inline)
-002|static_key_count(inline)
-002|static_key_false(inline)
-002|trace_mm_compaction_migratepages(inline)
-002|compact_zone(?, [NSD:0xFFFFFF80088CBCB0] capc = 0x0)
-003|kcompactd_do_work(inline)
-003|kcompactd([X19] p = 0xFFFFFF93227FBC40)
-004|kthread([X20] _create = 0xFFFFFFE1AFB26380)
-005|ret_from_fork(asm)
The issue was reported on an smart phone product with 6GB ram and 3GB
zram as swap device.
This patch fixes the issue by reset high_pfn before searching each free
area, which ensure freepage and freelist match when call
move_freelist_head in fast_isolate_freepages().
Link: http://lkml.kernel.org/r/20190118175136.31341-12-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20210112094720.1238444-1-wu-yan@tcl.com
Fixes: 5a811889de10f1eb ("mm, compaction: use free lists to quickly locate a migration target")
Signed-off-by: Rokudo Yan <wu-yan@tcl.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ecbf4724e6061b4b01be20f6d797d64d462b2bc8 upstream.
The page_huge_active() can be called from scan_movable_pages() which do
not hold a reference count to the HugeTLB page. So when we call
page_huge_active() from scan_movable_pages(), the HugeTLB page can be
freed parallel. Then we will trigger a BUG_ON which is in the
page_huge_active() when CONFIG_DEBUG_VM is enabled. Just remove the
VM_BUG_ON_PAGE.
Link: https://lkml.kernel.org/r/20210115124942.46403-6-songmuchun@bytedance.com
Fixes: 7e1f049efb86 ("mm: hugetlb: cleanup using paeg_huge_active()")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0eb2df2b5629794020f75e94655e1994af63f0d4 upstream.
There is a race between isolate_huge_page() and __free_huge_page().
CPU0: CPU1:
if (PageHuge(page))
put_page(page)
__free_huge_page(page)
spin_lock(&hugetlb_lock)
update_and_free_page(page)
set_compound_page_dtor(page,
NULL_COMPOUND_DTOR)
spin_unlock(&hugetlb_lock)
isolate_huge_page(page)
// trigger BUG_ON
VM_BUG_ON_PAGE(!PageHead(page), page)
spin_lock(&hugetlb_lock)
page_huge_active(page)
// trigger BUG_ON
VM_BUG_ON_PAGE(!PageHuge(page), page)
spin_unlock(&hugetlb_lock)
When we isolate a HugeTLB page on CPU0. Meanwhile, we free it to the
buddy allocator on CPU1. Then, we can trigger a BUG_ON on CPU0, because
it is already freed to the buddy allocator.
Link: https://lkml.kernel.org/r/20210115124942.46403-5-songmuchun@bytedance.com
Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ffddd499ba6122b1a07828f023d1d67629aa017 upstream.
There is a race condition between __free_huge_page()
and dissolve_free_huge_page().
CPU0: CPU1:
// page_count(page) == 1
put_page(page)
__free_huge_page(page)
dissolve_free_huge_page(page)
spin_lock(&hugetlb_lock)
// PageHuge(page) && !page_count(page)
update_and_free_page(page)
// page is freed to the buddy
spin_unlock(&hugetlb_lock)
spin_lock(&hugetlb_lock)
clear_page_huge_active(page)
enqueue_huge_page(page)
// It is wrong, the page is already freed
spin_unlock(&hugetlb_lock)
The race window is between put_page() and dissolve_free_huge_page().
We should make sure that the page is already on the free list when it is
dissolved.
As a result __free_huge_page would corrupt page(s) already in the buddy
allocator.
Link: https://lkml.kernel.org/r/20210115124942.46403-4-songmuchun@bytedance.com
Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 585fc0d2871c9318c949fbf45b1f081edd489e96 upstream.
If a new hugetlb page is allocated during fallocate it will not be
marked as active (set_page_huge_active) which will result in a later
isolate_huge_page failure when the page migration code would like to
move that page. Such a failure would be unexpected and wrong.
Only export set_page_huge_active, just leave clear_page_huge_active as
static. Because there are no external users.
Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com
Fixes: 70c3547e36f5 (hugetlbfs: add hugetlbfs_fallocate())
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2dcb3964544177c51853a210b6ad400de78ef17d ]
With kaslr the kernel image is placed at a random place, so starting the
bottom-up allocation with the kernel_end can result in an allocation
failure and a warning like this one:
hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node
------------[ cut here ]------------
memblock: bottom-up allocation failed, memory hotremove may be affected
WARNING: CPU: 0 PID: 0 at mm/memblock.c:332 memblock_find_in_range_node+0x178/0x25a
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0+ #1169
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:memblock_find_in_range_node+0x178/0x25a
Code: e9 6d ff ff ff 48 85 c0 0f 85 da 00 00 00 80 3d 9b 35 df 00 00 75 15 48 c7 c7 c0 75 59 88 c6 05 8b 35 df 00 01 e8 25 8a fa ff <0f> 0b 48 c7 44 24 20 ff ff ff ff 44 89 e6 44 89 ea 48 c7 c1 70 5c
RSP: 0000:ffffffff88803d18 EFLAGS: 00010086 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000240000000 RCX: 00000000ffffdfff
RDX: 00000000ffffdfff RSI: 00000000ffffffea RDI: 0000000000000046
RBP: 0000000100000000 R08: ffffffff88922788 R09: 0000000000009ffb
R10: 00000000ffffe000 R11: 3fffffffffffffff R12: 0000000000000000
R13: 0000000000000000 R14: 0000000080000000 R15: 00000001fb42c000
FS: 0000000000000000(0000) GS:ffffffff88f71000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa080fb401000 CR3: 00000001fa80a000 CR4: 00000000000406b0
Call Trace:
memblock_alloc_range_nid+0x8d/0x11e
cma_declare_contiguous_nid+0x2c4/0x38c
hugetlb_cma_reserve+0xdc/0x128
flush_tlb_one_kernel+0xc/0x20
native_set_fixmap+0x82/0xd0
flat_get_apic_id+0x5/0x10
register_lapic_address+0x8e/0x97
setup_arch+0x8a5/0xc3f
start_kernel+0x66/0x547
load_ucode_bsp+0x4c/0xcd
secondary_startup_64_no_verify+0xb0/0xbb
random: get_random_bytes called from __warn+0xab/0x110 with crng_init=0
---[ end trace f151227d0b39be70 ]---
At the same time, the kernel image is protected with memblock_reserve(),
so we can just start searching at PAGE_SIZE. In this case the bottom-up
allocation has the same chances to success as a top-down allocation, so
there is no reason to fallback in the case of a failure. All together it
simplifies the logic.
Link: https://lkml.kernel.org/r/20201217201214.3414100-2-guro@fb.com
Fixes: 8fabc623238e ("powerpc: Ensure that swiotlb buffer is allocated from low memory")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Wonhyuk Yang <vvghjk1234@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b50da6e9f42ade19141f6cf8870bb2312b055aa3 upstream.
The scenario on which "Free swap = -4kB" happens in my system, which is caused
by several get_swap_pages racing with each other and show_swap_cache_info
happens simutaniously. No need to add a lock on get_swap_page_of_type as we
remove "Presub/PosAdd" here.
ProcessA ProcessB ProcessC
ngoals = 1 ngoals = 1
avail = nr_swap_pages(1) avail = nr_swap_pages(1)
nr_swap_pages(1) -= ngoals
nr_swap_pages(0) -= ngoals
nr_swap_pages = -1
Link: https://lkml.kernel.org/r/1607050340-4535-1-git-send-email-zhaoyang.huang@unisoc.com
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ce8f86ee94fabcc98537ddccd7e82cfd360a4dc5 upstream.
The trace point *trace_mm_page_alloc_zone_locked()* in __rmqueue() does
not currently cover all branches. Add the missing tracepoint and check
the page before do that.
[akpm@linux-foundation.org: use IS_ENABLED() to suppress warning]
Link: https://lkml.kernel.org/r/20201228132901.41523-1-carver4lio@163.com
Signed-off-by: Hailong liu <liu.hailong6@zte.com.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 757fed1d0898b893d7daa84183947c70f27632f3 upstream.
This reverts commit dde3c6b72a16c2db826f54b2d49bdea26c3534a2.
syzbot report a double-free bug. The following case can cause this bug.
- mm/slab_common.c: create_cache(): if the __kmem_cache_create() fails,
it does:
out_free_cache:
kmem_cache_free(kmem_cache, s);
- but __kmem_cache_create() - at least for slub() - will have done
sysfs_slab_add(s)
-> sysfs_create_group() .. fails ..
-> kobject_del(&s->kobj); .. which frees s ...
We can't remove the kmem_cache_free() in create_cache(), because other
error cases of __kmem_cache_create() do not free this.
So, revert the commit dde3c6b72a16 ("mm/slub: fix a memory leak in
sysfs_slab_add()") to fix this.
Reported-by: syzbot+d0bd96b4696c1ef67991@syzkaller.appspotmail.com
Fixes: dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 377bf660d07a47269510435d11f3b65d53edca20 upstream.
This reverts commit d3921cb8be29ce5668c64e23ffdaeec5f8c69399.
Chris Wilson reports that it causes boot problems:
"We have half a dozen or so different machines in CI that are silently
failing to boot, that we believe is bisected to this patch"
and the CI team confirmed that a revert fixed the issues.
The cause is unknown for now, so let's revert it.
Link: https://lore.kernel.org/lkml/161160687463.28991.354987542182281928@build.alporthouse.com/
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3921cb8be29ce5668c64e23ffdaeec5f8c69399 upstream.
There could be struct pages that are not backed by actual physical
memory. This can happen when the actual memory bank is not a multiple
of SECTION_SIZE or when an architecture does not register memory holes
reserved by the firmware as memblock.memory.
Such pages are currently initialized using init_unavailable_mem()
function that iterates through PFNs in holes in memblock.memory and if
there is a struct page corresponding to a PFN, the fields if this page
are set to default values and the page is marked as Reserved.
init_unavailable_mem() does not take into account zone and node the page
belongs to and sets both zone and node links in struct page to zero.
On a system that has firmware reserved holes in a zone above ZONE_DMA,
for instance in a configuration below:
# grep -A1 E820 /proc/iomem
7a17b000-7a216fff : Unknown E820 type
7a217000-7bffffff : System RAM
unset zone link in struct page will trigger
VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);
because there are pages in both ZONE_DMA32 and ZONE_DMA (unset zone link
in struct page) in the same pageblock.
Update init_unavailable_mem() to use zone constraints defined by an
architecture to properly setup the zone link and use node ID of the
adjacent range in memblock.memory to set the node link.
Link: https://lkml.kernel.org/r/20210111194017.22696-3-rppt@kernel.org
Fixes: 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5dabd1712cd056814f9ab15f1d68157ceb04e741 upstream.
kasan_remove_zero_shadow() shall use original virtual address, start and
size, instead of shadow address.
Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a11a496ee6e2ab6ed850233c96b94caf042af0b9 upstream.
During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.
In the test case for kasan_remove_zero_shadow():
shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000
3-level page table:
PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K
0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.
In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.
Fix by correcting the condition when next and addr are neither aligned.
Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c447d274f3746fbed6e695e7b9a2d7bd8b31b71 upstream.
Currently the kernel is not correctly updating the numa stats for
NR_FILE_PAGES and NR_SHMEM on THP migration. Fix that.
For NR_FILE_DIRTY and NR_ZONE_WRITE_PENDING, although at the moment
there is no need to handle THP migration as kernel still does not have
write support for file THP but to be more future proof, this patch adds
the THP support for those stats as well.
Link: https://lkml.kernel.org/r/20210108155813.2914586-2-shakeelb@google.com
Fixes: e71769ae52609 ("mm: enable thp migration for shmem thp")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a8792f600abacd7e1b9bb667759dca1c153f64c upstream.
The kernel updates the per-node NR_FILE_DIRTY stats on page migration
but not the memcg numa stats.
That was not an issue until recently the commit 5f9a4f4a7096 ("mm:
memcontrol: add the missing numa_stat interface for cgroup v2") exposed
numa stats for the memcg.
So fix the file_dirty per-memcg numa stat.
Link: https://lkml.kernel.org/r/20210108155813.2914586-1-shakeelb@google.com
Fixes: 5f9a4f4a7096 ("mm: memcontrol: add the missing numa_stat interface for cgroup v2")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3de7d4f25a7438f09fef4e71ef111f1805cd8e7c upstream.
Imran Khan reported a 16% regression in hackbench results caused by the
commit f2fe7b09a52b ("mm: memcg/slab: charge individual slab objects
instead of pages"). The regression is noticeable in the case of a
consequent allocation of several relatively large slab objects, e.g.
skb's. As soon as the amount of stocked bytes exceeds PAGE_SIZE,
drain_obj_stock() and __memcg_kmem_uncharge() are called, and it leads
to a number of atomic operations in page_counter_uncharge().
The corresponding call graph is below (provided by Imran Khan):
|__alloc_skb
| |
| |__kmalloc_reserve.isra.61
| | |
| | |__kmalloc_node_track_caller
| | | |
| | | |slab_pre_alloc_hook.constprop.88
| | | obj_cgroup_charge
| | | | |
| | | | |__memcg_kmem_charge
| | | | | |
| | | | | |page_counter_try_charge
| | | | |
| | | | |refill_obj_stock
| | | | | |
| | | | | |drain_obj_stock.isra.68
| | | | | | |
| | | | | | |__memcg_kmem_uncharge
| | | | | | | |
| | | | | | | |page_counter_uncharge
| | | | | | | | |
| | | | | | | | |page_counter_cancel
| | | |
| | | |
| | | |__slab_alloc
| | | | |
| | | | |___slab_alloc
| | | | |
| | | |slab_post_alloc_hook
Instead of directly uncharging the accounted kernel memory, it's
possible to refill the generic page-sized per-cpu stock instead. It's a
much faster operation, especially on a default hierarchy. As a bonus,
__memcg_kmem_uncharge_page() will also get faster, so the freeing of
page-sized kernel allocations (e.g. large kmallocs) will become faster.
A similar change has been done earlier for the socket memory by the
commit 475d0487a2ad ("mm: memcontrol: use per-cpu stocks for socket
memory uncharging").
Link: https://lkml.kernel.org/r/20210106042239.2860107-1-guro@fb.com
Fixes: f2fe7b09a52b ("mm: memcg/slab: charge individual slab objects instead of pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Imran Khan <imran.f.khan@oracle.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Michal Koutn <mkoutny@suse.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ff60eb052eeba95cfb3efe16b08c9199f8121cf upstream.
acquire_slab() fails if there is contention on the freelist of the page
(probably because some other CPU is concurrently freeing an object from
the page). In that case, it might make sense to look for a different page
(since there might be more remote frees to the page from other CPUs, and
we don't want contention on struct page).
However, the current code accidentally stops looking at the partial list
completely in that case. Especially on kernels without CONFIG_NUMA set,
this means that get_partial() fails and new_slab_objects() falls back to
new_slab(), allocating new pages. This could lead to an unnecessary
increase in memory fragmentation.
Link: https://lkml.kernel.org/r/20201228130853.1871516-1-jannh@google.com
Fixes: 7ced37197196 ("slub: Acquire_slab() avoid loop")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit feb889fb40fafc6933339cf1cca8f770126819fb ]
So technically there is nothing wrong with adding a pinned page to the
swap cache, but the pinning obviously means that the page can't actually
be free'd right now anyway, so it's a bit pointless.
However, the real problem is not with it being a bit pointless: the real
issue is that after we've added it to the swap cache, we'll try to unmap
the page. That will succeed, because the code in mm/rmap.c doesn't know
or care about pinned pages.
Even the unmapping isn't fatal per se, since the page will stay around
in memory due to the pinning, and we do hold the connection to it using
the swap cache. But when we then touch it next and take a page fault,
the logic in do_swap_page() will map it back into the process as a
possibly read-only page, and we'll then break the page association on
the next COW fault.
Honestly, this issue could have been fixed in any of those other places:
(a) we could refuse to unmap a pinned page (which makes conceptual
sense), or (b) we could make sure to re-map a pinned page writably in
do_swap_page(), or (c) we could just make do_wp_page() not COW the
pinned page (which was what we historically did before that "mm:
do_wp_page() simplification" commit).
But while all of them are equally valid models for breaking this chain,
not putting pinned pages into the swap cache in the first place is the
simplest one by far.
It's also the safest one: the reason why do_wp_page() was changed in the
first place was that getting the "can I re-use this page" wrong is so
fraught with errors. If you do it wrong, you end up with an incorrectly
shared page.
As a result, using "page_maybe_dma_pinned()" in either do_wp_page() or
do_swap_page() would be a serious bug since it is only a (very good)
heuristic. Re-using the page requires a hard black-and-white rule with
no room for ambiguity.
In contrast, saying "this page is very likely dma pinned, so let's not
add it to the swap cache and try to unmap it" is an obviously safe thing
to do, and if the heuristic might very rarely be a false positive, no
harm is done.
Fixes: 09854ba94c6a ("mm: do_wp_page() simplification")
Reported-and-tested-by: Martin Raiber <martin@urbackup.org>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb351d75ce1e75b4f793d609efac08426ca50acd upstream.
Fix the build error:
mm/process_vm_access.c:277:5: error: implicit declaration of function 'in_compat_syscall'; did you mean 'in_ia32_syscall'? [-Werror=implicit-function-declaration]
Fixes: 38dc5079da7081e "Fix compat regression in process_vm_rw()"
Reported-by: syzbot+5b0d0de84d6c65b8dd2b@syzkaller.appspotmail.com
Cc: Kyle Huey <me@kylehuey.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0eb98f1588c2cc7a79816d84ab18a55d254f481c upstream.
The huge page size is encoded for VM_FAULT_HWPOISON errors only. So if
we return VM_FAULT_HWPOISON, huge page size would just be ignored.
Link: https://lkml.kernel.org/r/20210107123449.38481-1-linmiaohe@huawei.com
Fixes: aa50d3a7aa81 ("Encode huge page size for VM_FAULT_HWPOISON errors")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c22ee5284cf58017fa8c6d21d8f8c68159b6faab upstream.
In VM_MAP_PUT_PAGES case, we should put pages and free array in vfree.
But we missed to set area->nr_pages in vmap(). So we would fail to put
pages in __vunmap() because area->nr_pages = 0.
Link: https://lkml.kernel.org/r/20210107123541.39206-1-linmiaohe@huawei.com
Fixes: b944afc9d64d ("mm: add a VM_MAP_PUT_PAGES flag for vmap")
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c2407cf7d22d0c0d94cf20342b3b8f06f1d904e7 upstream.
Ever since commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common()
logic") we've had some very occasional reports of BUG_ON(PageWriteback)
in write_cache_pages(), which we thought we already fixed in commit
073861ed77b6 ("mm: fix VM_BUG_ON(PageTail) and BUG_ON(PageWriteback)").
But syzbot just reported another one, even with that commit in place.
And it turns out that there's a simpler way to trigger the BUG_ON() than
the one Hugh found with page re-use. It all boils down to the fact that
the page writeback is ostensibly serialized by the page lock, but that
isn't actually really true.
Yes, the people _setting_ writeback all do so under the page lock, but
the actual clearing of the bit - and waking up any waiters - happens
without any page lock.
This gives us this fairly simple race condition:
CPU1 = end previous writeback
CPU2 = start new writeback under page lock
CPU3 = write_cache_pages()
CPU1 CPU2 CPU3
---- ---- ----
end_page_writeback()
test_clear_page_writeback(page)
... delayed...
lock_page();
set_page_writeback()
unlock_page()
lock_page()
wait_on_page_writeback();
wake_up_page(page, PG_writeback);
.. wakes up CPU3 ..
BUG_ON(PageWriteback(page));
where the BUG_ON() happens because we woke up the PG_writeback bit
becasue of the _previous_ writeback, but a new one had already been
started because the clearing of the bit wasn't actually atomic wrt the
actual wakeup or serialized by the page lock.
The reason this didn't use to happen was that the old logic in waiting
on a page bit would just loop if it ever saw the bit set again.
The nice proper fix would probably be to get rid of the whole "wait for
writeback to clear, and then set it" logic in the writeback path, and
replace it with an atomic "wait-to-set" (ie the same as we have for page
locking: we set the page lock bit with a single "lock_page()", not with
"wait for lock bit to clear and then set it").
However, out current model for writeback is that the waiting for the
writeback bit is done by the generic VFS code (ie write_cache_pages()),
but the actual setting of the writeback bit is done much later by the
filesystem ".writepages()" function.
IOW, to make the writeback bit have that same kind of "wait-to-set"
behavior as we have for page locking, we'd have to change our roughly
~50 different writeback functions. Painful.
Instead, just make "wait_on_page_writeback()" loop on the very unlikely
situation that the PG_writeback bit is still set, basically re-instating
the old behavior. This is very non-optimal in case of contention, but
since we only ever set the bit under the page lock, that situation is
controlled.
Reported-by: syzbot+2fc0712f8f8b8b8fa0ef@syzkaller.appspotmail.com
Fixes: 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic")
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dc2da7b45ffe954a0090f5d0310ed7b0b37d2bd2 upstream.
VMware observed a performance regression during memmap init on their
platform, and bisected to commit 73a6e474cb376 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.
Before the commit:
[0.033176] Normal zone: 1445888 pages used for memmap
[0.033176] Normal zone: 89391104 pages, LIFO batch:63
[0.035851] ACPI: PM-Timer IO Port: 0x448
With commit
[0.026874] Normal zone: 1445888 pages used for memmap
[0.026875] Normal zone: 89391104 pages, LIFO batch:63
[2.028450] ACPI: PM-Timer IO Port: 0x448
The root cause is the current memmap defer init doesn't work as expected.
Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node. However, since commit 73a6e474cb376,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.
E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2. The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's
only one memory section's memmap initialized. That's why more time is
costed at the time.
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]
Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.
Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit 73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Rahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7dd91c456a8cdbcd7066997d15e36d14276a949 upstream.
syzbot reported the deadlock here [1]. The issue is in hugetlb cow
error handling when there are not enough huge pages for the faulting
task which took the original reservation. It is possible that other
(child) tasks could have consumed pages associated with the reservation.
In this case, we want the task which took the original reservation to
succeed. So, we unmap any associated pages in children so that they can
be used by the faulting task that owns the reservation.
The unmapping code needs to hold i_mmap_rwsem in write mode. However,
due to commit c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd
sharing synchronization") we are already holding i_mmap_rwsem in read
mode when hugetlb_cow is called.
Technically, i_mmap_rwsem does not need to be held in read mode for COW
mappings as they can not share pmd's. Modifying the fault code to not
take i_mmap_rwsem in read mode for COW (and other non-sharable) mappings
is too involved for a stable fix.
Instead, we simply drop the hugetlb_fault_mutex and i_mmap_rwsem before
unmapping. This is OK as it is technically not needed. They are
reacquired after unmapping as expected by calling code. Since this is
done in an uncommon error path, the overhead of dropping and reacquiring
mutexes is acceptable.
While making changes, remove redundant BUG_ON after unmap_ref_private.
[1] https://lkml.kernel.org/r/000000000000b73ccc05b5cf8558@google.com
Link: https://lkml.kernel.org/r/4c5781b8-3b00-761e-c0c7-c5edebb6ec1a@oracle.com
Fixes: c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: syzbot+5eee4145df3c15e96625@syzkaller.appspotmail.com
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dcf5aedb24f899d537e21c18ea552c780598d352 upstream.
Use temporary slots in reclaim function to avoid possible race when
freeing those.
While at it, make sure we check CLAIMED flag under page lock in the
reclaim function to make sure we are not racing with z3fold_alloc().
Link: https://lkml.kernel.org/r/20201209145151.18994-4-vitaly.wool@konsulko.com
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: <stable@vger.kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fc5488651c7d840c9cad9b0f273f2f31bd03413a upstream.
Patch series "z3fold: stability / rt fixes".
Address z3fold stability issues under stress load, primarily in the
reclaim and free aspects. Besides, it fixes the locking problems that
were only seen in real-time kernel configuration.
This patch (of 3):
There used to be two places in the code where slots could be freed, namely
when freeing the last allocated handle from the slots and when releasing
the z3fold header these slots aree linked to. The logic to decide on
whether to free certain slots was complicated and error prone in both
functions and it led to failures in RT case.
To fix that, make free_handle() the single point of freeing slots.
Link: https://lkml.kernel.org/r/20201209145151.18994-1-vitaly.wool@konsulko.com
Link: https://lkml.kernel.org/r/20201209145151.18994-2-vitaly.wool@konsulko.com
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Tested-by: Mike Galbraith <efault@gmx.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 597c892038e08098b17ccfe65afd9677e6979800 ]
On 2-node NUMA hosts we see bursts of kswapd reclaim and subsequent
pressure spikes and stalls from cache refaults while there is plenty of
free memory in the system.
Usually, kswapd is woken up when all eligible nodes in an allocation are
full. But the code related to watermark boosting can wake kswapd on one
full node while the other one is mostly empty. This may be justified to
fight fragmentation, but is currently unconditionally done whether
watermark boosting is occurring or not.
In our case, many of our workloads' throughput scales with available
memory, and pure utilization is a more tangible concern than trends
around longer-term fragmentation. As a result we generally disable
watermark boosting.
Wake kswapd only woken when watermark boosting is requested.
Link: https://lkml.kernel.org/r/20201020175833.397286-1-hannes@cmpxchg.org
Fixes: 1c30844d2dfe ("mm: reclaim small amounts of memory when an external fragmentation event occurs")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7fc2513aa237e2ce239ab54d7b04d1d79b317110 ]
Preserve the error code from region_add() instead of returning success.
Link: https://lkml.kernel.org/r/X9NGZWnZl5/Mt99R@mwanda
Fixes: 0db9d74ed884 ("hugetlb: disable region_add file_region coalescing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e8aaedb182d6ddffc894b832e4962629907b3e0 ]
madvise_inject_error() uses get_user_pages_fast to translate the address
we specified to a page. After [1], we drop the extra reference count for
memory_failure() path. That commit says that memory_failure wanted to
keep the pin in order to take the page out of circulation.
The truth is that we need to keep the page pinned, otherwise the page
might be re-used after the put_page() and we can end up messing with
someone else's memory.
E.g:
CPU0
process X CPU1
madvise_inject_error
get_user_pages
put_page
page gets reclaimed
process Y allocates the page
memory_failure
// We mess with process Y memory
madvise() is meant to operate on a self address space, so messing with
pages that do not belong to us seems the wrong thing to do.
To avoid that, let us keep the page pinned for memory_failure as well.
Pages for DAX mappings will release this extra refcount in
memory_failure_dev_pagemap.
[1] ("23e7b5c2e271: mm, madvise_inject_error:
Let memory_failure() optionally take a page reference")
Link: https://lkml.kernel.org/r/20201207094818.8518-1-osalvador@suse.de
Fixes: 23e7b5c2e271 ("mm, madvise_inject_error: Let memory_failure() optionally take a page reference")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c041098c690fe53cea5d20c62f128a4f7a5c19fe ]
The size of vm area can be affected by the presence or not of the guard
page. In particular when VM_NO_GUARD is present, the actual accessible
size has to be considered like the real size minus the guard page.
Currently kasan does not keep into account this information during the
poison operation and in particular tries to poison the guard page as well.
This approach, even if incorrect, does not cause an issue because the tags
for the guard page are written in the shadow memory. With the future
introduction of the Tag-Based KASAN, being the guard page inaccessible by
nature, the write tag operation on this page triggers a fault.
Fix kasan shadow poisoning size invoking get_vm_area_size() instead of
accessing directly the field in the data structure to detect the correct
value.
Link: https://lkml.kernel.org/r/20201027160213.32904-1-vincenzo.frascino@arm.com
Fixes: d98c9e83b5e7c ("kasan: fix crashes on access to memory mapped by vm_map_ram()")
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a7dd4e901b8a4ee040ba953900d1d7120b34ee5 ]
When multiple locks are acquired, they should be released in reverse
order. For s_start() and s_stop() in mm/vmalloc.c, that is not the
case.
s_start: mutex_lock(&vmap_purge_lock); spin_lock(&vmap_area_lock);
s_stop : mutex_unlock(&vmap_purge_lock); spin_unlock(&vmap_area_lock);
This unlock sequence, though allowed, is not optimal. If a waiter is
present, mutex_unlock() will need to go through the slowpath of waking
up the waiter with preemption disabled. Fix that by releasing the
spinlock first before the mutex.
Link: https://lkml.kernel.org/r/20201213180843.16938-1-longman@redhat.com
Fixes: e36176be1c39 ("mm/vmalloc: rework vmap_area_lock")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 013339df116c2ee0d796dd8bfb8f293a2030c063 ]
Since commit 369ea8242c0f ("mm/rmap: update to new mmu_notifier semantic
v2"), the code to check the secondary MMU's page table access bit is
broken for !(TTU_IGNORE_ACCESS) because the page is unmapped from the
secondary MMU's page table before the check. More specifically for those
secondary MMUs which unmap the memory in
mmu_notifier_invalidate_range_start() like kvm.
However memory reclaim is the only user of !(TTU_IGNORE_ACCESS) or the
absence of TTU_IGNORE_ACCESS and it explicitly performs the page table
access check before trying to unmap the page. So, at worst the reclaim
will miss accesses in a very short window if we remove page table access
check in unmapping code.
There is an unintented consequence of !(TTU_IGNORE_ACCESS) for the memcg
reclaim. From memcg reclaim the page_referenced() only account the
accesses from the processes which are in the same memcg of the target page
but the unmapping code is considering accesses from all the processes, so,
decreasing the effectiveness of memcg reclaim.
The simplest solution is to always assume TTU_IGNORE_ACCESS in unmapping
code.
Link: https://lkml.kernel.org/r/20201104231928.1494083-1-shakeelb@google.com
Fixes: 369ea8242c0f ("mm/rmap: update to new mmu_notifier semantic v2")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eefbfa7fd678805b38a46293e78543f98f353d3e ]
The rcu_read_lock/unlock only can guarantee that the memcg will not be
freed, but it cannot guarantee the success of css_get to memcg.
If the whole process of a cgroup offlining is completed between reading a
objcg->memcg pointer and bumping the css reference on another CPU, and
there are exactly 0 external references to this memory cgroup (how we get
to the obj_cgroup_charge() then?), css_get() can change the ref counter
from 0 back to 1.
Link: https://lkml.kernel.org/r/20201028035013.99711-2-songmuchun@bytedance.com
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f7659a314736b32b66273dbf91c19874a052fde ]
Consider the following memcg hierarchy.
root
/ \
A B
If we failed to get the reference on objcg of memcg A, the
get_obj_cgroup_from_current can return the wrong objcg for the root
memcg.
Link: https://lkml.kernel.org/r/20201029164429.58703-1-songmuchun@bytedance.com
Fixes: bf4f059954dc ("mm: memcg/slab: obj_cgroup API")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4509b42c38963f495b49aa50209c34337286ecbe ]
These functions accomplish the same thing but have different
implementations.
unpin_user_page() has a bug where it calls mod_node_page_state() after
calling put_page() which creates a risk that the page could have been
hot-uplugged from the system.
Fix this by using put_compound_head() as the only implementation.
__unpin_devmap_managed_user_page() and related can be deleted as well in
favour of the simpler, but slower, version in put_compound_head() that has
an extra atomic page_ref_sub, but always calls put_page() which internally
contains the special devmap code.
Move put_compound_head() to be directly after try_grab_compound_head() so
people can find it in future.
Link: https://lkml.kernel.org/r/0-v1-6730d4ee0d32+40e6-gup_combine_put_jgg@nvidia.com
Fixes: 1970dc6f5226 ("mm/gup: /proc/vmstat: pin_user_pages (FOLL_PIN) reporting")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
CC: Joao Martins <joao.m.martins@oracle.com>
CC: Jonathan Corbet <corbet@lwn.net>
CC: Dan Williams <dan.j.williams@intel.com>
CC: Dave Chinner <david@fromorbit.com>
CC: Christoph Hellwig <hch@infradead.org>
CC: Jane Chu <jane.chu@oracle.com>
CC: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
CC: Michal Hocko <mhocko@suse.com>
CC: Mike Kravetz <mike.kravetz@oracle.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Muchun Song <songmuchun@bytedance.com>
CC: Vlastimil Babka <vbabka@suse.cz>
CC: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57efa1fe5957694fa541c9062de0a127f0b9acb0 ]
Since commit 70e806e4e645 ("mm: Do early cow for pinned pages during
fork() for ptes") pages under a FOLL_PIN will not be write protected
during COW for fork. This means that pages returned from
pin_user_pages(FOLL_WRITE) should not become write protected while the pin
is active.
However, there is a small race where get_user_pages_fast(FOLL_PIN) can
establish a FOLL_PIN at the same time copy_present_page() is write
protecting it:
CPU 0 CPU 1
get_user_pages_fast()
internal_get_user_pages_fast()
copy_page_range()
pte_alloc_map_lock()
copy_present_page()
atomic_read(has_pinned) == 0
page_maybe_dma_pinned() == false
atomic_set(has_pinned, 1);
gup_pgd_range()
gup_pte_range()
pte_t pte = gup_get_pte(ptep)
pte_access_permitted(pte)
try_grab_compound_head()
pte = pte_wrprotect(pte)
set_pte_at();
pte_unmap_unlock()
// GUP now returns with a write protected page
The first attempt to resolve this by using the write protect caused
problems (and was missing a barrrier), see commit f3c64eda3e50 ("mm: avoid
early COW write protect games during fork()")
Instead wrap copy_p4d_range() with the write side of a seqcount and check
the read side around gup_pgd_range(). If there is a collision then
get_user_pages_fast() fails and falls back to slow GUP.
Slow GUP is safe against this race because copy_page_range() is only
called while holding the exclusive side of the mmap_lock on the src
mm_struct.
[akpm@linux-foundation.org: coding style fixes]
Link: https://lore.kernel.org/r/CAHk-=wi=iCnYCARbPGjkVJu9eyYeZ13N64tZYLdOB8CP5Q_PLw@mail.gmail.com
Link: https://lkml.kernel.org/r/2-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Fixes: f3c64eda3e50 ("mm: avoid early COW write protect games during fork()")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: "Ahmed S. Darwish" <a.darwish@linutronix.de> [seqcount_t parts]
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c28b1fc70390df32e29991eedd52bd86e7aba080 ]
Patch series "Add a seqcount between gup_fast and copy_page_range()", v4.
As discussed and suggested by Linus use a seqcount to close the small race
between gup_fast and copy_page_range().
Ahmed confirms that raw_write_seqcount_begin() is the correct API to use
in this case and it doesn't trigger any lockdeps.
I was able to test it using two threads, one forking and the other using
ibv_reg_mr() to trigger GUP fast. Modifying copy_page_range() to sleep
made the window large enough to reliably hit to test the logic.
This patch (of 2):
The next patch in this series makes the lockless flow a little more
complex, so move the entire block into a new function and remove a level
of indention. Tidy a bit of cruft:
- addr is always the same as start, so use start
- Use the modern check_add_overflow() for computing end = start + len
- nr_pinned/pages << PAGE_SHIFT needs the LHS to be unsigned long to
avoid shift overflow, make the variables unsigned long to avoid coding
casts in both places. nr_pinned was missing its cast
- The handling of ret and nr_pinned can be streamlined a bit
No functional change.
Link: https://lkml.kernel.org/r/0-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Link: https://lkml.kernel.org/r/1-v4-908497cf359a+4782-gup_fork_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Commit 1378a5ee451a ("mm: store compound_nr as well as compound_order")
added compound_nr counter to first tail struct page, overlaying with
page->mapping. The overlay itself is fine, but while freeing gigantic
hugepages via free_contig_range(), a "bad page" check will trigger for
non-NULL page->mapping on the first tail page:
BUG: Bad page state in process bash pfn:380001
page:00000000c35f0856 refcount:0 mapcount:0 mapping:00000000126b68aa index:0x0 pfn:0x380001
aops:0x0
flags: 0x3ffff00000000000()
raw: 3ffff00000000000 0000000000000100 0000000000000122 0000000100000000
raw: 0000000000000000 0000000000000000 ffffffff00000000 0000000000000000
page dumped because: non-NULL mapping
Modules linked in:
CPU: 6 PID: 616 Comm: bash Not tainted 5.10.0-rc7-next-20201208 #1
Hardware name: IBM 3906 M03 703 (LPAR)
Call Trace:
show_stack+0x6e/0xe8
dump_stack+0x90/0xc8
bad_page+0xd6/0x130
free_pcppages_bulk+0x26a/0x800
free_unref_page+0x6e/0x90
free_contig_range+0x94/0xe8
update_and_free_page+0x1c4/0x2c8
free_pool_huge_page+0x11e/0x138
set_max_huge_pages+0x228/0x300
nr_hugepages_store_common+0xb8/0x130
kernfs_fop_write+0xd2/0x218
vfs_write+0xb0/0x2b8
ksys_write+0xac/0xe0
system_call+0xe6/0x288
Disabling lock debugging due to kernel taint
This is because only the compound_order is cleared in
destroy_compound_gigantic_page(), and compound_nr is set to
1U << order == 1 for order 0 in set_compound_order(page, 0).
Fix this by explicitly clearing compound_nr for first tail page after
calling set_compound_order(page, 0).
Link: https://lkml.kernel.org/r/20201208182813.66391-2-gerald.schaefer@linux.ibm.com
Fixes: 1378a5ee451a ("mm: store compound_nr as well as compound_order")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We hit this issue in our internal test. When enabling generic kasan, a
kfree()'d object is put into per-cpu quarantine first. If the cpu goes
offline, object still remains in the per-cpu quarantine. If we call
kmem_cache_destroy() now, slub will report "Objects remaining" error.
=============================================================================
BUG test_module_slab (Not tainted): Objects remaining in test_module_slab on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Disabling lock debugging due to kernel taint
INFO: Slab 0x(____ptrval____) objects=34 used=1 fp=0x(____ptrval____) flags=0x2ffff00000010200
CPU: 3 PID: 176 Comm: cat Tainted: G B 5.10.0-rc1-00007-g4525c8781ec0-dirty #10
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x2b0
show_stack+0x18/0x68
dump_stack+0xfc/0x168
slab_err+0xac/0xd4
__kmem_cache_shutdown+0x1e4/0x3c8
kmem_cache_destroy+0x68/0x130
test_version_show+0x84/0xf0
module_attr_show+0x40/0x60
sysfs_kf_seq_show+0x128/0x1c0
kernfs_seq_show+0xa0/0xb8
seq_read+0x1f0/0x7e8
kernfs_fop_read+0x70/0x338
vfs_read+0xe4/0x250
ksys_read+0xc8/0x180
__arm64_sys_read+0x44/0x58
el0_svc_common.constprop.0+0xac/0x228
do_el0_svc+0x38/0xa0
el0_sync_handler+0x170/0x178
el0_sync+0x174/0x180
INFO: Object 0x(____ptrval____) @offset=15848
INFO: Allocated in test_version_show+0x98/0xf0 age=8188 cpu=6 pid=172
stack_trace_save+0x9c/0xd0
set_track+0x64/0xf0
alloc_debug_processing+0x104/0x1a0
___slab_alloc+0x628/0x648
__slab_alloc.isra.0+0x2c/0x58
kmem_cache_alloc+0x560/0x588
test_version_show+0x98/0xf0
module_attr_show+0x40/0x60
sysfs_kf_seq_show+0x128/0x1c0
kernfs_seq_show+0xa0/0xb8
seq_read+0x1f0/0x7e8
kernfs_fop_read+0x70/0x338
vfs_read+0xe4/0x250
ksys_read+0xc8/0x180
__arm64_sys_read+0x44/0x58
el0_svc_common.constprop.0+0xac/0x228
kmem_cache_destroy test_module_slab: Slab cache still has objects
Register a cpu hotplug function to remove all objects in the offline
per-cpu quarantine when cpu is going offline. Set a per-cpu variable to
indicate this cpu is offline.
[qiang.zhang@windriver.com: fix slab double free when cpu-hotplug]
Link: https://lkml.kernel.org/r/20201204102206.20237-1-qiang.zhang@windriver.com
Link: https://lkml.kernel.org/r/1606895585-17382-2-git-send-email-Kuan-Ying.Lee@mediatek.com
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Guangye Yang <guangye.yang@mediatek.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Qian Cai <qcai@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Revert commit 3351b16af494 ("mm/filemap: add static for function
__add_to_page_cache_locked") due to incompatibility with
ALLOW_ERROR_INJECTION which result in build errors.
Link: https://lkml.kernel.org/r/CAADnVQJ6tmzBXvtroBuEH6QA0H+q7yaSKxrVvVxhqr3KBZdEXg@mail.gmail.com
Tested-by: Justin Forbes <jmforbes@linuxtx.org>
Tested-by: Greg Thelen <gthelen@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Michal Kubecek <mkubecek@suse.cz>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Tony Luck <tony.luck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Jann spotted the security hole due to race of mm ownership check.
If the task is sharing the mm_struct but goes through execve() before
mm_access(), it could skip process_madvise_behavior_valid check. That
makes *any advice hint* to reach into the remote process.
This patch removes the mm ownership check. With it, it will lose the
ability that local process could give *any* advice hint with vector
interface for some reason (e.g., performance). Since there is no
concrete example in upstream yet, it would be better to remove the
abiliity at this moment and need to review when such new advice comes
up.
Fixes: ecb8ac8b1f14 ("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On success, mmap should return the begin address of newly mapped area,
but patch "mm: mmap: merge vma after call_mmap() if possible" set
vm_start of newly merged vma to return value addr. Users of mmap will
get wrong address if vma is merged after call_mmap(). We fix this by
moving the assignment to addr before merging vma.
We have a driver which changes vm_flags, and this bug is found by our
testcases.
Fixes: d70cec898324 ("mm: mmap: merge vma after call_mmap() if possible")
Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Hongxiang Lou <louhongxiang@huawei.com>
Cc: Hu Shiyuan <hushiyuan@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20201203085350.22624-1-liuzixian4@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Adrian Moreno was ruuning a kubernetes 1.19 + containerd/docker workload
using hugetlbfs. In this environment the issue is reproduced by:
- Start a simple pod that uses the recently added HugePages medium
feature (pod yaml attached)
- Start a DPDK app. It doesn't need to run successfully (as in transfer
packets) nor interact with real hardware. It seems just initializing
the EAL layer (which handles hugepage reservation and locking) is
enough to trigger the issue
- Delete the Pod (or let it "Complete").
This would result in a kworker thread going into a tight loop (top output):
1425 root 20 0 0 0 0 R 99.7 0.0 5:22.45 kworker/28:7+cgroup_destroy
'perf top -g' reports:
- 63.28% 0.01% [kernel] [k] worker_thread
- 49.97% worker_thread
- 52.64% process_one_work
- 62.08% css_killed_work_fn
- hugetlb_cgroup_css_offline
41.52% _raw_spin_lock
- 2.82% _cond_resched
rcu_all_qs
2.66% PageHuge
- 0.57% schedule
- 0.57% __schedule
We are spinning in the do-while loop in hugetlb_cgroup_css_offline.
Worse yet, we are holding the master cgroup lock (cgroup_mutex) while
infinitely spinning. Little else can be done on the system as the
cgroup_mutex can not be acquired.
Do note that the issue can be reproduced by simply offlining a hugetlb
cgroup containing pages with reservation counts.
The loop in hugetlb_cgroup_css_offline is moving page counts from the
cgroup being offlined to the parent cgroup. This is done for each
hstate, and is repeated until hugetlb_cgroup_have_usage returns false.
The routine moving counts (hugetlb_cgroup_move_parent) is only moving
'usage' counts. The routine hugetlb_cgroup_have_usage is checking for
both 'usage' and 'reservation' counts. Discussion about what to do with
reservation counts when reparenting was discussed here:
https://lore.kernel.org/linux-kselftest/CAHS8izMFAYTgxym-Hzb_JmkTK1N_S9tGN71uS6MFV+R7swYu5A@mail.gmail.com/
The decision was made to leave a zombie cgroup for with reservation
counts. Unfortunately, the code checking reservation counts was
incorrectly added to hugetlb_cgroup_have_usage.
To fix the issue, simply remove the check for reservation counts. While
fixing this issue, a related bug in hugetlb_cgroup_css_offline was
noticed. The hstate index is not reinitialized each time through the
do-while loop. Fix this as well.
Fixes: 1adc4d419aa2 ("hugetlb_cgroup: add interface for charge/uncharge hugetlb reservations")
Reported-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201203220242.158165-1-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Link: https://lkml.kernel.org/r/1604661895-5495-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We can't call kvfree() with a spin lock held, so defer it. Fixes a
might_sleep() runtime warning.
Fixes: 873d7bcfd066 ("mm/swapfile.c: use kvzalloc for swap_info_struct allocation")
Signed-off-by: Qian Cai <qcai@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201202151549.10350-1-qcai@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
While I was doing zram testing, I found sometimes decompression failed
since the compression buffer was corrupted. With investigation, I found
below commit calls cond_resched unconditionally so it could make a
problem in atomic context if the task is reschedule.
BUG: sleeping function called from invalid context at mm/vmalloc.c:108
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 946, name: memhog
3 locks held by memhog/946:
#0: ffff9d01d4b193e8 (&mm->mmap_lock#2){++++}-{4:4}, at: __mm_populate+0x103/0x160
#1: ffffffffa3d53de0 (fs_reclaim){+.+.}-{0:0}, at: __alloc_pages_slowpath.constprop.0+0xa98/0x1160
#2: ffff9d01d56b8110 (&zspage->lock){.+.+}-{3:3}, at: zs_map_object+0x8e/0x1f0
CPU: 0 PID: 946 Comm: memhog Not tainted 5.9.3-00011-gc5bfc0287345-dirty #316
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
Call Trace:
unmap_kernel_range_noflush+0x2eb/0x350
unmap_kernel_range+0x14/0x30
zs_unmap_object+0xd5/0xe0
zram_bvec_rw.isra.0+0x38c/0x8e0
zram_rw_page+0x90/0x101
bdev_write_page+0x92/0xe0
__swap_writepage+0x94/0x4a0
pageout+0xe3/0x3a0
shrink_page_list+0xb94/0xd60
shrink_inactive_list+0x158/0x460
We can fix this by removing the ZSMALLOC_PGTABLE_MAPPING feature (which
contains the offending calling code) from zsmalloc.
Even though this option showed some amount improvement(e.g., 30%) in
some arm32 platforms, it has been headache to maintain since it have
abused APIs[1](e.g., unmap_kernel_range in atomic context).
Since we are approaching to deprecate 32bit machines and already made
the config option available for only builtin build since v5.8, lastly it
has been not default option in zsmalloc, it's time to drop the option
for better maintenance.
[1] http://lore.kernel.org/linux-mm/20201105170249.387069-1-minchan@kernel.org
Fixes: e47110e90584 ("mm/vunmap: add cond_resched() in vunmap_pmd_range")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Harish Sriram <harish@linux.ibm.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201117202916.GA3856507@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When investigating a slab cache bloat problem, significant amount of
negative dentry cache was seen, but confusingly they neither got shrunk
by reclaimer (the host has very tight memory) nor be shrunk by dropping
cache. The vmcore shows there are over 14M negative dentry objects on
lru, but tracing result shows they were even not scanned at all.
Further investigation shows the memcg's vfs shrinker_map bit is not set.
So the reclaimer or dropping cache just skip calling vfs shrinker. So
we have to reboot the hosts to get the memory back.
I didn't manage to come up with a reproducer in test environment, and
the problem can't be reproduced after rebooting. But it seems there is
race between shrinker map bit clear and reparenting by code inspection.
The hypothesis is elaborated as below.
The memcg hierarchy on our production environment looks like:
root
/ \
system user
The main workloads are running under user slice's children, and it
creates and removes memcg frequently. So reparenting happens very often
under user slice, but no task is under user slice directly.
So with the frequent reparenting and tight memory pressure, the below
hypothetical race condition may happen:
CPU A CPU B
reparent
dst->nr_items == 0
shrinker:
total_objects == 0
add src->nr_items to dst
set_bit
return SHRINK_EMPTY
clear_bit
child memcg offline
replace child's kmemcg_id with
parent's (in memcg_offline_kmem())
list_lru_del() between shrinker runs
see parent's kmemcg_id
dec dst->nr_items
reparent again
dst->nr_items may go negative
due to concurrent list_lru_del()
The second run of shrinker:
read nr_items without any
synchronization, so it may
see intermediate negative
nr_items then total_objects
may return 0 coincidently
keep the bit cleared
dst->nr_items != 0
skip set_bit
add scr->nr_item to dst
After this point dst->nr_item may never go zero, so reparenting will not
set shrinker_map bit anymore. And since there is no task under user
slice directly, so no new object will be added to its lru to set the
shrinker map bit either. That bit is kept cleared forever.
How does list_lru_del() race with reparenting? It is because reparenting
replaces children's kmemcg_id to parent's without protecting from
nlru->lock, so list_lru_del() may see parent's kmemcg_id but actually
deleting items from child's lru, but dec'ing parent's nr_items, so the
parent's nr_items may go negative as commit 2788cf0c401c ("memcg:
reparent list_lrus and free kmemcg_id on css offline") says.
Since it is impossible that dst->nr_items goes negative and
src->nr_items goes zero at the same time, so it seems we could set the
shrinker map bit iff src->nr_items != 0. We could synchronize
list_lru_count_one() and reparenting with nlru->lock, but it seems
checking src->nr_items in reparenting is the simplest and avoids lock
contention.
Fixes: fae91d6d8be5 ("mm/list_lru.c: set bit in memcg shrinker bitmap on first list_lru item appearance")
Suggested-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.19]
Link: https://lkml.kernel.org/r/20201202171749.264354-1-shy828301@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
