| Age | Commit message (Collapse) | Author |
|---|
|
commit e720e7d0e983bf05de80b231bccc39f1487f0f16 upstream.
There are code paths that rely on zero_pfn to be fully initialized
before core_initcall. For example, wq_sysfs_init() is a core_initcall
function that eventually results in a call to kernel_execve, which
causes a page fault with a subsequent mmput. If zero_pfn is not
initialized by then it may not get cleaned up properly and result in an
error:
BUG: Bad rss-counter state mm:(ptrval) type:MM_ANONPAGES val:1
Here is an analysis of the race as seen on a MIPS device. On this
particular MT7621 device (Ubiquiti ER-X), zero_pfn is PFN 0 until
initialized, at which point it becomes PFN 5120:
1. wq_sysfs_init calls into kobject_uevent_env at core_initcall:
kobject_uevent_env+0x7e4/0x7ec
kset_register+0x68/0x88
bus_register+0xdc/0x34c
subsys_virtual_register+0x34/0x78
wq_sysfs_init+0x1c/0x4c
do_one_initcall+0x50/0x1a8
kernel_init_freeable+0x230/0x2c8
kernel_init+0x10/0x100
ret_from_kernel_thread+0x14/0x1c
2. kobject_uevent_env() calls call_usermodehelper_exec() which executes
kernel_execve asynchronously.
3. Memory allocations in kernel_execve cause a page fault, bumping the
MM reference counter:
add_mm_counter_fast+0xb4/0xc0
handle_mm_fault+0x6e4/0xea0
__get_user_pages.part.78+0x190/0x37c
__get_user_pages_remote+0x128/0x360
get_arg_page+0x34/0xa0
copy_string_kernel+0x194/0x2a4
kernel_execve+0x11c/0x298
call_usermodehelper_exec_async+0x114/0x194
4. In case zero_pfn has not been initialized yet, zap_pte_range does
not decrement the MM_ANONPAGES RSS counter and the BUG message is
triggered shortly afterwards when __mmdrop checks the ref counters:
__mmdrop+0x98/0x1d0
free_bprm+0x44/0x118
kernel_execve+0x160/0x1d8
call_usermodehelper_exec_async+0x114/0x194
ret_from_kernel_thread+0x14/0x1c
To avoid races such as described above, initialize init_zero_pfn at
early_initcall level. Depending on the architecture, ZERO_PAGE is
either constant or gets initialized even earlier, at paging_init, so
there is no issue with initializing zero_pfn earlier.
Link: https://lkml.kernel.org/r/CALCv0x2YqOXEAy2Q=hafjhHCtTHVodChv1qpM=niAXOpqEbt7w@mail.gmail.com
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: stable@vger.kernel.org
Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The straight backport of 5.12's e1baddf8475b ("mm/memcg: set memcg when
splitting page") works fine in 5.11, but turned out to be wrong for 5.10:
because that relies on a separate flag, which must also be set for the
memcg to be recognized and uncharged and cleared when freeing. Fix that.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c2655835fd8cabdfe7dab737253de3ffb88da126 ]
If one or more notifiers fails .invalidate_range_start(), invoke
.invalidate_range_end() for "all" notifiers. If there are multiple
notifiers, those that did not fail are expecting _start() and _end() to
be paired, e.g. KVM's mmu_notifier_count would become imbalanced.
Disallow notifiers that can fail _start() from implementing _end() so
that it's unnecessary to either track which notifiers rejected _start(),
or had already succeeded prior to a failed _start().
Note, the existing behavior of calling _start() on all notifiers even
after a previous notifier failed _start() was an unintented "feature".
Make it canon now that the behavior is depended on for correctness.
As of today, the bug is likely benign:
1. The only caller of the non-blocking notifier is OOM kill.
2. The only notifiers that can fail _start() are the i915 and Nouveau
drivers.
3. The only notifiers that utilize _end() are the SGI UV GRU driver
and KVM.
4. The GRU driver will never coincide with the i195/Nouveau drivers.
5. An imbalanced kvm->mmu_notifier_count only causes soft lockup in the
_guest_, and the guest is already doomed due to being an OOM victim.
Fix the bug now to play nice with future usage, e.g. KVM has a
potential use case for blocking memslot updates in KVM while an
invalidation is in-progress, and failure to unblock would result in said
updates being blocked indefinitely and hanging.
Found by inspection. Verified by adding a second notifier in KVM that
periodically returns -EAGAIN on non-blockable ranges, triggering OOM,
and observing that KVM exits with an elevated notifier count.
Link: https://lkml.kernel.org/r/20210311180057.1582638-1-seanjc@google.com
Fixes: 93065ac753e4 ("mm, oom: distinguish blockable mode for mmu notifiers")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Ben Gardon <bgardon@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d85aecf2844ff02a0e5f077252b2461d4f10c9f0 upstream.
The current implementation of hugetlb_cgroup for shared mappings could
have different behavior. Consider the following two scenarios:
1.Assume initial css reference count of hugetlb_cgroup is 1:
1.1 Call hugetlb_reserve_pages with from = 1, to = 2. So css reference
count is 2 associated with 1 file_region.
1.2 Call hugetlb_reserve_pages with from = 2, to = 3. So css reference
count is 3 associated with 2 file_region.
1.3 coalesce_file_region will coalesce these two file_regions into
one. So css reference count is 3 associated with 1 file_region
now.
2.Assume initial css reference count of hugetlb_cgroup is 1 again:
2.1 Call hugetlb_reserve_pages with from = 1, to = 3. So css reference
count is 2 associated with 1 file_region.
Therefore, we might have one file_region while holding one or more css
reference counts. This inconsistency could lead to imbalanced css_get()
and css_put() pair. If we do css_put one by one (i.g. hole punch case),
scenario 2 would put one more css reference. If we do css_put all
together (i.g. truncate case), scenario 1 will leak one css reference.
The imbalanced css_get() and css_put() pair would result in a non-zero
reference when we try to destroy the hugetlb cgroup. The hugetlb cgroup
directory is removed __but__ associated resource is not freed. This
might result in OOM or can not create a new hugetlb cgroup in a busy
workload ultimately.
In order to fix this, we have to make sure that one file_region must
hold exactly one css reference. So in coalesce_file_region case, we
should release one css reference before coalescence. Also only put css
reference when the entire file_region is removed.
The last thing to note is that the caller of region_add() will only hold
one reference to h_cg->css for the whole contiguous reservation region.
But this area might be scattered when there are already some
file_regions reside in it. As a result, many file_regions may share only
one h_cg->css reference. In order to ensure that one file_region must
hold exactly one css reference, we should do css_get() for each
file_region and release the reference held by caller when they are done.
[linmiaohe@huawei.com: fix imbalanced css_get and css_put pair for shared mappings]
Link: https://lkml.kernel.org/r/20210316023002.53921-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210301120540.37076-1-linmiaohe@huawei.com
Fixes: 075a61d07a8e ("hugetlb_cgroup: add accounting for shared mappings")
Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Wanpeng Li <liwp.linux@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d679578fe9c762c8fbc3d796a067cbba84a7884 upstream.
Commit ca0246bb97c2 ("z3fold: fix possible reclaim races") introduced
the PAGE_CLAIMED flag "to avoid racing on a z3fold 'headless' page
release." By atomically testing and setting the bit in each of
z3fold_free() and z3fold_reclaim_page(), a double-free was avoided.
However, commit dcf5aedb24f8 ("z3fold: stricter locking and more careful
reclaim") appears to have unintentionally broken this behavior by moving
the PAGE_CLAIMED check in z3fold_reclaim_page() to after the page lock
gets taken, which only happens for non-headless pages. For headless
pages, the check is now skipped entirely and races can occur again.
I have observed such a race on my system:
page:00000000ffbd76b7 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x165316
flags: 0x2ffff0000000000()
raw: 02ffff0000000000 ffffea0004535f48 ffff8881d553a170 0000000000000000
raw: 0000000000000000 0000000000000011 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0)
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:707!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 2 PID: 291928 Comm: kworker/2:0 Tainted: G B 5.10.7-arch1-1-kasan #1
Hardware name: Gigabyte Technology Co., Ltd. H97N-WIFI/H97N-WIFI, BIOS F9b 03/03/2016
Workqueue: zswap-shrink shrink_worker
RIP: 0010:__free_pages+0x10a/0x130
Code: c1 e7 06 48 01 ef 45 85 e4 74 d1 44 89 e6 31 d2 41 83 ec 01 e8 e7 b0 ff ff eb da 48 c7 c6 e0 32 91 88 48 89 ef e8 a6 89 f8 ff <0f> 0b 4c 89 e7 e8 fc 79 07 00 e9 33 ff ff ff 48 89 ef e8 ff 79 07
RSP: 0000:ffff88819a2ffb98 EFLAGS: 00010296
RAX: 0000000000000000 RBX: ffffea000594c5a8 RCX: 0000000000000000
RDX: 1ffffd4000b298b7 RSI: 0000000000000000 RDI: ffffea000594c5b8
RBP: ffffea000594c580 R08: 000000000000003e R09: ffff8881d5520bbb
R10: ffffed103aaa4177 R11: 0000000000000001 R12: ffffea000594c5b4
R13: 0000000000000000 R14: ffff888165316000 R15: ffffea000594c588
FS: 0000000000000000(0000) GS:ffff8881d5500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7c8c3654d8 CR3: 0000000103f42004 CR4: 00000000001706e0
Call Trace:
z3fold_zpool_shrink+0x9b6/0x1240
shrink_worker+0x35/0x90
process_one_work+0x70c/0x1210
worker_thread+0x539/0x1200
kthread+0x330/0x400
ret_from_fork+0x22/0x30
Modules linked in: rfcomm ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ccm algif_aead des_generic libdes ecb algif_skcipher cmac bnep md4 algif_hash af_alg vfat fat intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel iwlmvm hid_logitech_hidpp kvm at24 mac80211 snd_hda_codec_realtek iTCO_wdt snd_hda_codec_generic intel_pmc_bxt snd_hda_codec_hdmi ledtrig_audio iTCO_vendor_support mei_wdt mei_hdcp snd_hda_intel snd_intel_dspcfg libarc4 soundwire_intel irqbypass iwlwifi soundwire_generic_allocation rapl soundwire_cadence intel_cstate snd_hda_codec intel_uncore btusb joydev mousedev snd_usb_audio pcspkr btrtl uvcvideo nouveau btbcm i2c_i801 btintel snd_hda_core videobuf2_vmalloc i2c_smbus snd_usbmidi_lib videobuf2_memops bluetooth snd_hwdep soundwire_bus snd_soc_rt5640 videobuf2_v4l2 cfg80211 snd_soc_rl6231 videobuf2_common snd_rawmidi lpc_ich alx videodev mdio snd_seq_device snd_soc_core mc ecdh_generic mxm_wmi mei_me
hid_logitech_dj wmi snd_compress e1000e ac97_bus mei ttm rfkill snd_pcm_dmaengine ecc snd_pcm snd_timer snd soundcore mac_hid acpi_pad pkcs8_key_parser it87 hwmon_vid crypto_user fuse ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 dm_crypt cbc encrypted_keys trusted tpm rng_core usbhid dm_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper xhci_pci xhci_pci_renesas i915 video intel_gtt i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm agpgart
---[ end trace 126d646fc3dc0ad8 ]---
To fix the issue, re-add the earlier test and set in the case where we
have a headless page.
Link: https://lkml.kernel.org/r/c8106dbe6d8390b290cd1d7f873a2942e805349e.1615452048.git.tommyhebb@gmail.com
Fixes: dcf5aedb24f8 ("z3fold: stricter locking and more careful reclaim")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Jongseok Kim <ks77sj@gmail.com>
Cc: Snild Dolkow <snild@sony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1baddf8475b06cc56f4bafecf9a32a124343d9f upstream.
As described in the split_page() comment, for the non-compound high order
page, the sub-pages must be freed individually. If the memcg of the first
page is valid, the tail pages cannot be uncharged when be freed.
For example, when alloc_pages_exact is used to allocate 1MB continuous
physical memory, 2MB is charged(kmemcg is enabled and __GFP_ACCOUNT is
set). When make_alloc_exact free the unused 1MB and free_pages_exact free
the applied 1MB, actually, only 4KB(one page) is uncharged.
Therefore, the memcg of the tail page needs to be set when splitting a
page.
Michel:
There are at least two explicit users of __GFP_ACCOUNT with
alloc_exact_pages added recently. See 7efe8ef274024 ("KVM: arm64:
Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT") and c419621873713
("KVM: s390: Add memcg accounting to KVM allocations"), so this is not
just a theoretical issue.
Link: https://lkml.kernel.org/r/20210304074053.65527-3-zhouguanghui1@huawei.com
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Weilong Chen <chenweilong@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
nr_pages argument
commit be6c8982e4ab9a41907555f601b711a7e2a17d4c upstream.
Rename mem_cgroup_split_huge_fixup to split_page_memcg and explicitly pass
in page number argument.
In this way, the interface name is more common and can be used by
potential users. In addition, the complete info(memcg and flag) of the
memcg needs to be set to the tail pages.
Link: https://lkml.kernel.org/r/20210304074053.65527-2-zhouguanghui1@huawei.com
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Weilong Chen <chenweilong@huawei.com>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
layout
commit 0740a50b9baa4472cfb12442df4b39e2712a64a4 upstream.
There could be struct pages that are not backed by actual physical memory.
This can happen when the actual memory bank is not a multiple of
SECTION_SIZE or when an architecture does not register memory holes
reserved by the firmware as memblock.memory.
Such pages are currently initialized using init_unavailable_mem() function
that iterates through PFNs in holes in memblock.memory and if there is a
struct page corresponding to a PFN, the fields of this page are set to
default values and it is marked as Reserved.
init_unavailable_mem() does not take into account zone and node the page
belongs to and sets both zone and node links in struct page to zero.
Before commit 73a6e474cb37 ("mm: memmap_init: iterate over memblock
regions rather that check each PFN") the holes inside a zone were
re-initialized during memmap_init() and got their zone/node links right.
However, after that commit nothing updates the struct pages representing
such holes.
On a system that has firmware reserved holes in a zone above ZONE_DMA, for
instance in a configuration below:
# grep -A1 E820 /proc/iomem
7a17b000-7a216fff : Unknown E820 type
7a217000-7bffffff : System RAM
unset zone link in struct page will trigger
VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);
in set_pfnblock_flags_mask() when called with a struct page from a range
other than E820_TYPE_RAM because there are pages in the range of
ZONE_DMA32 but the unset zone link in struct page makes them appear as a
part of ZONE_DMA.
Interleave initialization of the unavailable pages with the normal
initialization of memory map, so that zone and node information will be
properly set on struct pages that are not backed by the actual memory.
With this change the pages for holes inside a zone will get proper
zone/node links and the pages that are not spanned by any node will get
links to the adjacent zone/node. The holes between nodes will be
prepended to the zone/node above the hole and the trailing pages in the
last section that will be appended to the zone/node below.
[akpm@linux-foundation.org: don't initialize static to zero, use %llu for u64]
Link: https://lkml.kernel.org/r/20210225224351.7356-2-rppt@kernel.org
Fixes: 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Qian Cai <cai@lca.pw>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Łukasz Majczak <lma@semihalf.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Sarvela, Tomi P" <tomi.p.sarvela@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 96cfe2c0fd23ea7c2368d14f769d287e7ae1082e upstream.
process_madvise currently requires ptrace attach capability.
PTRACE_MODE_ATTACH gives one process complete control over another
process. It effectively removes the security boundary between the two
processes (in one direction). Granting ptrace attach capability even to a
system process is considered dangerous since it creates an attack surface.
This severely limits the usage of this API.
The operations process_madvise can perform do not affect the correctness
of the operation of the target process; they only affect where the data is
physically located (and therefore, how fast it can be accessed). What we
want is the ability for one process to influence another process in order
to optimize performance across the entire system while leaving the
security boundary intact.
Replace PTRACE_MODE_ATTACH with a combination of PTRACE_MODE_READ and
CAP_SYS_NICE. PTRACE_MODE_READ to prevent leaking ASLR metadata and
CAP_SYS_NICE for influencing process performance.
Link: https://lkml.kernel.org/r/20210303185807.2160264-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ce64428d62026a10cb5d80138ff2f90cc21d367 upstream.
Userfaultfd self-test fails occasionally, indicating a memory corruption.
Analyzing this problem indicates that there is a real bug since mmap_lock
is only taken for read in mwriteprotect_range() and defers flushes, and
since there is insufficient consideration of concurrent deferred TLB
flushes in wp_page_copy(). Although the PTE is flushed from the TLBs in
wp_page_copy(), this flush takes place after the copy has already been
performed, and therefore changes of the page are possible between the time
of the copy and the time in which the PTE is flushed.
To make matters worse, memory-unprotection using userfaultfd also poses a
problem. Although memory unprotection is logically a promotion of PTE
permissions, and therefore should not require a TLB flush, the current
userrfaultfd code might actually cause a demotion of the architectural PTE
permission: when userfaultfd_writeprotect() unprotects memory region, it
unintentionally *clears* the RW-bit if it was already set. Note that this
unprotecting a PTE that is not write-protected is a valid use-case: the
userfaultfd monitor might ask to unprotect a region that holds both
write-protected and write-unprotected PTEs.
The scenario that happens in selftests/vm/userfaultfd is as follows:
cpu0 cpu1 cpu2
---- ---- ----
[ Writable PTE
cached in TLB ]
userfaultfd_writeprotect()
[ write-*unprotect* ]
mwriteprotect_range()
mmap_read_lock()
change_protection()
change_protection_range()
...
change_pte_range()
[ *clear* “write”-bit ]
[ defer TLB flushes ]
[ page-fault ]
...
wp_page_copy()
cow_user_page()
[ copy page ]
[ write to old
page ]
...
set_pte_at_notify()
A similar scenario can happen:
cpu0 cpu1 cpu2 cpu3
---- ---- ---- ----
[ Writable PTE
cached in TLB ]
userfaultfd_writeprotect()
[ write-protect ]
[ deferred TLB flush ]
userfaultfd_writeprotect()
[ write-unprotect ]
[ deferred TLB flush]
[ page-fault ]
wp_page_copy()
cow_user_page()
[ copy page ]
... [ write to page ]
set_pte_at_notify()
This race exists since commit 292924b26024 ("userfaultfd: wp: apply
_PAGE_UFFD_WP bit"). Yet, as Yu Zhao pointed, these races became apparent
since commit 09854ba94c6a ("mm: do_wp_page() simplification") which made
wp_page_copy() more likely to take place, specifically if page_count(page)
> 1.
To resolve the aforementioned races, check whether there are pending
flushes on uffd-write-protected VMAs, and if there are, perform a flush
before doing the COW.
Further optimizations will follow to avoid during uffd-write-unprotect
unnecassary PTE write-protection and TLB flushes.
Link: https://lkml.kernel.org/r/20210304095423.3825684-1-namit@vmware.com
Fixes: 09854ba94c6a ("mm: do_wp_page() simplification")
Signed-off-by: Nadav Amit <namit@vmware.com>
Suggested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d15dfd31384ba3cb93150e5f87661a76fa419f74 upstream.
In a system supporting MTE, the linear map must allow reading/writing
allocation tags by setting the memory type as Normal Tagged. Currently,
this is only handled for memory present at boot. Hotplugged memory uses
Normal non-Tagged memory.
Introduce pgprot_mhp() for hotplugged memory and use it in
add_memory_resource(). The arm64 code maps pgprot_mhp() to
pgprot_tagged().
Note that ZONE_DEVICE memory should not be mapped as Tagged and
therefore setting the memory type in arch_add_memory() is not feasible.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 0178dc761368 ("arm64: mte: Use Normal Tagged attributes for the linear map")
Reported-by: Patrick Daly <pdaly@codeaurora.org>
Tested-by: Patrick Daly <pdaly@codeaurora.org>
Link: https://lore.kernel.org/r/1614745263-27827-1-git-send-email-pdaly@codeaurora.org
Cc: <stable@vger.kernel.org> # 5.10.x
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20210309122601.5543-1-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b1ea29bc0d7b94d420f96a0f4121403efc3dd85 upstream.
This reverts commit 8ff60eb052eeba95cfb3efe16b08c9199f8121cf.
The kernel test robot reports a huge performance regression due to the
commit, and the reason seems fairly straightforward: when there is
contention on the page list (which is what causes acquire_slab() to
fail), we do _not_ want to just loop and try again, because that will
transfer the contention to the 'n->list_lock' spinlock we hold, and
just make things even worse.
This is admittedly likely a problem only on big machines - the kernel
test robot report comes from a 96-thread dual socket Intel Xeon Gold
6252 setup, but the regression there really is quite noticeable:
-47.9% regression of stress-ng.rawpkt.ops_per_sec
and the commit that was marked as being fixed (7ced37197196: "slub:
Acquire_slab() avoid loop") actually did the loop exit early very
intentionally (the hint being that "avoid loop" part of that commit
message), exactly to avoid this issue.
The correct thing to do may be to pick some kind of reasonable middle
ground: instead of breaking out of the loop on the very first sign of
contention, or trying over and over and over again, the right thing may
be to re-try _once_, and then give up on the second failure (or pick
your favorite value for "once"..).
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210301080404.GF12822@xsang-OptiPlex-9020/
Cc: Jann Horn <jannh@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit caf6912f3f4af7232340d500a4a2008f81b93f14 upstream.
We're not factoring in the start of the file for where to write and
read the swapfile, which leads to very unfortunate side effects of
writing where we should not be...
Fixes: dd6bd0d9c7db ("swap: use bdev_read_page() / bdev_write_page()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2395928158059b8f9858365fce7713ce7fef62e4 upstream.
There exists multiple path may do zram compaction concurrently.
1. auto-compaction triggered during memory reclaim
2. userspace utils write zram<id>/compaction node
So, multiple threads may call zs_shrinker_scan/zs_compact concurrently.
But pages_compacted is a per zsmalloc pool variable and modification
of the variable is not serialized(through under class->lock).
There are two issues here:
1. the pages_compacted may not equal to total number of pages
freed(due to concurrently add).
2. zs_shrinker_scan may not return the correct number of pages
freed(issued by current shrinker).
The fix is simple:
1. account the number of pages freed in zs_compact locally.
2. use actomic variable pages_compacted to accumulate total number.
Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com
Fixes: 860c707dca155a56 ("zsmalloc: account the number of compacted pages")
Signed-off-by: Rokudo Yan <wu-yan@tcl.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1ba9da8f0f9a37d900ff7eff66482cf7de8015e upstream.
The current code would unnecessarily expand the address range. Consider
one example, (start, end) = (1G-2M, 3G+2M), and (vm_start, vm_end) =
(1G-4M, 3G+4M), the expected adjustment should be keep (1G-2M, 3G+2M)
without expand. But the current result will be (1G-4M, 3G+4M). Actually,
the range (1G-4M, 1G) and (3G, 3G+4M) would never been involved in pmd
sharing.
After this patch, we will check that the vma span at least one PUD aligned
size and the start,end range overlap the aligned range of vma.
With above example, the aligned vma range is (1G, 3G), so if (start, end)
range is within (1G-4M, 1G), or within (3G, 3G+4M), then no adjustment to
both start and end. Otherwise, we will have chance to adjust start
downwards or end upwards without exceeding (vm_start, vm_end).
Mike:
: The 'adjusted range' is used for calls to mmu notifiers and cache(tlb)
: flushing. Since the current code unnecessarily expands the range in some
: cases, more entries than necessary would be flushed. This would/could
: result in performance degradation. However, this is highly dependent on
: the user runtime. Is there a combination of vma layout and calls to
: actually hit this issue? If the issue is hit, will those entries
: unnecessarily flushed be used again and need to be unnecessarily reloaded?
Link: https://lkml.kernel.org/r/20210104081631.2921415-1-lixinhai.lxh@gmail.com
Fixes: 75802ca66354 ("mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible")
Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e2b7044c199229a3d20cefbd3184968238c4184 upstream.
Compaction always operates on pages from a single given zone when
isolating both pages to migrate and freepages. Pageblock boundaries are
intersected with zone boundaries to be safe in case zone starts or ends in
the middle of pageblock. The use of pageblock_pfn_to_page() protects
against non-contiguous pageblocks.
The functions fast_isolate_freepages() and fast_isolate_around() don't
currently protect the fast freepage isolation thoroughly enough against
these corner cases, and can result in freepage isolation operate outside
of zone boundaries:
- in fast_isolate_freepages() if we get a pfn from the first pageblock
of a zone that starts in the middle of that pageblock, 'highest' can
be a pfn outside of the zone.
If we fail to isolate anything in this function, we may then call
fast_isolate_around() on a pfn outside of the zone and there
effectively do a set_pageblock_skip(page_to_pfn(highest)) which may
currently hit a VM_BUG_ON() in some configurations
- fast_isolate_around() checks only the zone end boundary and not
beginning, nor that the pageblock is contiguous (with
pageblock_pfn_to_page()) so it's possible that we end up calling
isolate_freepages_block() on a range of pfn's from two different
zones and end up e.g. isolating freepages under the wrong zone's
lock.
This patch should fix the above issues.
Link: https://lkml.kernel.org/r/20210217173300.6394-1-vbabka@suse.cz
Fixes: 5a811889de10 ("mm, compaction: use free lists to quickly locate a migration target")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 519983645a9f2ec339cabfa0c6ef7b09be985dd0 upstream.
I went to go add a new RECLAIM_* mode for the zone_reclaim_mode sysctl.
Like a good kernel developer, I also went to go update the
documentation. I noticed that the bits in the documentation didn't
match the bits in the #defines.
The VM never explicitly checks the RECLAIM_ZONE bit. The bit is,
however implicitly checked when checking 'node_reclaim_mode==0'. The
RECLAIM_ZONE #define was removed in a cleanup. That, by itself is fine.
But, when the bit was removed (bit 0) the _other_ bit locations also got
changed. That's not OK because the bit values are documented to mean
one specific thing. Users surely do not expect the meaning to change
from kernel to kernel.
The end result is that if someone had a script that did:
sysctl vm.zone_reclaim_mode=1
it would have gone from enabling node reclaim for clean unmapped pages
to writing out pages during node reclaim after the commit in question.
That's not great.
Put the bits back the way they were and add a comment so something like
this is a bit harder to do again. Update the documentation to make it
clear that the first bit is ignored.
Link: https://lkml.kernel.org/r/20210219172555.FF0CDF23@viggo.jf.intel.com
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 648b5cf368e0 ("mm/vmscan: remove unused RECLAIM_OFF/RECLAIM_ZONE")
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3272cfc2525b3a2810a59312d7a1e6f04a0ca3ef upstream.
page structs are not guaranteed to be contiguous for gigantic pages. The
routine copy_huge_page_from_user can encounter gigantic pages, yet it
assumes page structs are contiguous when copying pages from user space.
Since page structs for the target gigantic page are not contiguous, the
data copied from user space could overwrite other pages not associated
with the gigantic page and cause data corruption.
Non-contiguous page structs are generally not an issue. However, they can
exist with a specific kernel configuration and hotplug operations. For
example: Configure the kernel with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP. Then, hotplug add memory for the area where
the gigantic page will be allocated.
Link: https://lkml.kernel.org/r/20210217184926.33567-2-mike.kravetz@oracle.com
Fixes: 8fb5debc5fcd ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dbfee5aee7e54f83d96ceb8e3e80717fac62ad63 upstream.
page structs are not guaranteed to be contiguous for gigantic pages. The
routine update_and_free_page can encounter a gigantic page, yet it assumes
page structs are contiguous when setting page flags in subpages.
If update_and_free_page encounters non-contiguous page structs, we can see
“BUG: Bad page state in process …” errors.
Non-contiguous page structs are generally not an issue. However, they can
exist with a specific kernel configuration and hotplug operations. For
example: Configure the kernel with CONFIG_SPARSEMEM and
!CONFIG_SPARSEMEM_VMEMMAP. Then, hotplug add memory for the area where
the gigantic page will be allocated. Zi Yan outlined steps to reproduce
here [1].
[1] https://lore.kernel.org/linux-mm/16F7C58B-4D79-41C5-9B64-A1A1628F4AF2@nvidia.com/
Link: https://lkml.kernel.org/r/20210217184926.33567-1-mike.kravetz@oracle.com
Fixes: 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1685bde6b9af55923180a76152036c7fb7176db0 upstream.
We use a global percpu int_active_memcg variable to store the remote memcg
when we are in the interrupt context. But get_active_memcg always return
the current->active_memcg or root_mem_cgroup. The remote memcg (set in
the interrupt context) is ignored. This is not what we want. So fix it.
Link: https://lkml.kernel.org/r/20210223091101.42150-1-songmuchun@bytedance.com
Fixes: 37d5985c003d ("mm: kmem: prepare remote memcg charging infra for interrupt contexts")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cae3af62b33aa931427a0f211e04347b22180b36 upstream.
When pages are swapped in, the VM may retain the swap copy to avoid
repeated writes in the future. It's also retained if shared pages are
faulted back in some processes, but not in others. During that time we
have an in-memory copy of the page, as well as an on-swap copy. Cgroup1
and cgroup2 handle these overlapping lifetimes slightly differently due to
the nature of how they account memory and swap:
Cgroup1 has a unified memory+swap counter that tracks a data page
regardless whether it's in-core or swapped out. On swapin, we transfer
the charge from the swap entry to the newly allocated swapcache page, even
though the swap entry might stick around for a while. That's why we have
a mem_cgroup_uncharge_swap() call inside mem_cgroup_charge().
Cgroup2 tracks memory and swap as separate, independent resources and thus
has split memory and swap counters. On swapin, we charge the newly
allocated swapcache page as memory, while the swap slot in turn must
remain charged to the swap counter as long as its allocated too.
The cgroup2 logic was broken by commit 2d1c498072de ("mm: memcontrol: make
swap tracking an integral part of memory control"), because it
accidentally removed the do_memsw_account() check in the branch inside
mem_cgroup_uncharge() that was supposed to tell the difference between the
charge transfer in cgroup1 and the separate counters in cgroup2.
As a result, cgroup2 currently undercounts retained swap to varying
degrees: swap slots are cached up to 50% of the configured limit or total
available swap space; partially faulted back shared pages are only limited
by physical capacity. This in turn allows cgroups to significantly
overconsume their alloted swap space.
Add the do_memsw_account() check back to fix this problem.
Link: https://lkml.kernel.org/r/20210217153237.92484-1-songmuchun@bytedance.com
Fixes: 2d1c498072de ("mm: memcontrol: make swap tracking an integral part of memory control")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 34dc45be4563f344d59ba0428416d0d265aa4f4d ]
Given 'struct dev_pagemap' spans both data pages and metadata pages be
careful to consult the altmap if present to delineate metadata. In fact
the pfn_first() helper already identifies the first valid data pfn, so
export that helper for other code paths via pgmap_pfn_valid().
Other usage of get_dev_pagemap() are not a concern because those are
operating on known data pfns having been looked up by get_user_pages().
I.e. metadata pfns are never user mapped.
Link: https://lkml.kernel.org/r/161058501758.1840162.4239831989762604527.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: 6100e34b2526 ("mm, memory_failure: Teach memory_failure() about dev_pagemap pages")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd89fb06509903f942a0ffe97ffa63034671ed0c ]
Currently if thp enabled=[madvise], mounting a tmpfs filesystem with
huge=always and mmapping files from that tmpfs does not result in
khugepaged collapsing those mappings, despite the mount flag indicating
that it should.
Fix that by breaking up the blocks of tests in hugepage_vma_check a little
bit, and testing things in the correct order.
Link: https://lkml.kernel.org/r/20201124194925.623931-4-riel@surriel.com
Fixes: c2231020ea7b ("mm: thp: register mm for khugepaged when merging vma for shmem")
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xu Yu <xuyu@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15d28d0d11609c7a4f217b3d85e26456d9beb134 ]
In the fast_find_migrateblock(), it iterates ocer the freelist to find the
proper pageblock. But there are some misbehaviors.
First, if the page we found is equal to cc->migrate_pfn, it is considered
that we didn't find a suitable pageblock. Secondly, if the loop was
terminated because order is less than PAGE_ALLOC_COSTLY_ORDER, it could be
considered that we found a suitable one. Thirdly, if the skip bit is set
on the page block and we goto continue, it doesn't check nr_scanned.
Fourthly, if the page block's skip bit is set, it checks that page block
is the last of list, which is unnecessary.
Link: https://lkml.kernel.org/r/20210128130411.6125-1-vvghjk1234@gmail.com
Fixes: 70b44595eafe9 ("mm, compaction: use free lists to quickly locate a migration source")
Signed-off-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ecc956551f8a66618f71838c790a9b0b4f9ca10 ]
If hugetlb_cma is enabled, it will skip boot time allocation when
allocating gigantic page, that doesn't means allocation failure, so
suppress this warning info.
Link: https://lkml.kernel.org/r/20210219123909.13130-1-chenwandun@huawei.com
Fixes: cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages using cma")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cc2205a67dec5a700227a693fc113441e73e4641 ]
In hugetlb_sysfs_add_hstate(), we would do kobject_put() on hstate_kobjs
when failed to create sysfs group but forget to set hstate_kobjs to NULL.
Then in hugetlb_register_node() error path, we may free it again via
hugetlb_unregister_node().
Link: https://lkml.kernel.org/r/20210107123249.36964-1-linmiaohe@huawei.com
Fixes: a3437870160c ("hugetlb: new sysfs interface")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <smuchun@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 90a3e375d324b2255b83e3dd29e99e2b05d82aaf ]
Since commit 42e4089c7890 ("x86/speculation/l1tf: Disallow non privileged
high MMIO PROT_NONE mappings"), when the first pfn modify is not allowed,
we would break the loop with pte unchanged. Then the wrong pte - 1 would
be passed to pte_unmap_unlock.
Andi said:
"While the fix is correct, I'm not sure if it actually is a real bug.
Is there any architecture that would do something else than unlocking
the underlying page? If it's just the underlying page then it should
be always the same page, so no bug"
Link: https://lkml.kernel.org/r/20210109080118.20885-1-linmiaohe@huawei.com
Fixes: 42e4089c789 ("x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings")
Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 96403bfe50c344b587ea53894954a9d152af1c9d ]
SLUB currently account kmalloc() and kmalloc_node() allocations larger
than order-1 page per-node. But it forget to update the per-memcg
vmstats. So it can lead to inaccurate statistics of "slab_unreclaimable"
which is from memory.stat. Fix it by using mod_lruvec_page_state instead
of mod_node_page_state.
Link: https://lkml.kernel.org/r/20210223092423.42420-1-songmuchun@bytedance.com
Fixes: 6a486c0ad4dc ("mm, sl[ou]b: improve memory accounting")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b0ba3bff3e7bb6b58bb248bdd2f3d8ad52fd10c3 ]
Patch series "Convert all THP vmstat counters to pages", v6.
This patch series is aimed to convert all THP vmstat counters to pages.
The unit of some vmstat counters are pages, some are bytes, some are
HPAGE_PMD_NR, and some are KiB. When we want to expose these vmstat
counters to the userspace, we have to know the unit of the vmstat counters
is which one. When the unit is bytes or kB, both clearly distinguishable
by the B/KB suffix. But for the THP vmstat counters, we may make mistakes.
For example, the below is some bug fix for the THP vmstat counters:
- 7de2e9f195b9 ("mm: memcontrol: correct the NR_ANON_THPS counter of hierarchical memcg")
- The first commit in this series ("fix NR_ANON_THPS accounting in charge moving")
This patch series can make the code clear. And make all the unit of the THP
vmstat counters in pages. Finally, the unit of the vmstat counters are
pages, kB and bytes. The B/KB suffix can tell us that the unit is bytes
or kB. The rest which is without suffix are pages.
In this series, I changed the following vmstat counters unit from HPAGE_PMD_NR
to pages. However, there is no change to the print format of output to user
space.
- NR_ANON_THPS
- NR_FILE_THPS
- NR_SHMEM_THPS
- NR_SHMEM_PMDMAPPED
- NR_FILE_PMDMAPPED
Doing this also can make the statistics more accuracy for the THP vmstat
counters. This series is consistent with 8f182270dfec ("mm/swap.c: flush lru
pvecs on compound page arrival").
Because we use struct per_cpu_nodestat to cache the vmstat counters, which
leads to inaccurate statistics especially THP vmstat counters. In the systems
with hundreds of processors it can be GBs of memory. For example, for a 96
CPUs system, the threshold is the maximum number of 125. And the per cpu
counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth of
memory in one go) so skipping the batching seems like sensible. Although every
THP stats update overflows the per-cpu counter, resorting to atomic global
updates. But it can make the statistics more accuracy for the THP vmstat
counters. From this point of view, I think that do this converting is
reasonable.
Thanks Hugh for mentioning this. This was inspired by Johannes and Roman.
Thanks to them.
This patch (of 7):
The unit of NR_ANON_THPS is HPAGE_PMD_NR already. So it should inc/dec by
one rather than nr_pages.
Link: https://lkml.kernel.org/r/20201228164110.2838-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20201228164110.2838-2-songmuchun@bytedance.com
Fixes: 468c398233da ("mm: memcontrol: switch to native NR_ANON_THPS counter")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Rafael. J. Wysocki <rafael@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 9fd6dad1261a541b3f5fa7dc5b152222306e6702 upstream.
Currently, the follow_pfn function is exported for modules but
follow_pte is not. However, follow_pfn is very easy to misuse,
because it does not provide protections (so most of its callers
assume the page is writable!) and because it returns after having
already unlocked the page table lock.
Provide instead a simplified version of follow_pte that does
not have the pmdpp and range arguments. The older version
survives as follow_invalidate_pte() for use by fs/dax.c.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff5c19ed4b087073cea38ff0edc80c23d7256943 upstream.
Merge __follow_pte_pmd, follow_pte_pmd and follow_pte into a single
follow_pte function and just pass two additional NULL arguments for the
two previous follow_pte callers.
[sfr@canb.auug.org.au: merge fix for "s390/pci: remove races against pte updates"]
Link: https://lkml.kernel.org/r/20201111221254.7f6a3658@canb.auug.org.au
Link: https://lkml.kernel.org/r/20201029101432.47011-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7336375734d65ecc82956b59a79cf5deccce880c upstream.
Patch series "simplify follow_pte a bit".
This small series drops the not needed follow_pte_pmd exports, and
simplifies the follow_pte family of functions a bit.
This patch (of 2):
follow_pte_pmd() is only used by the DAX code, which can't be modular.
Link: https://lkml.kernel.org/r/20201029101432.47011-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e82553c10b0899994153f9bf0af333c0a1550fd7 upstream.
This reverts commit 536d3bf261a2fc3b05b3e91e7eef7383443015cf, as it can
cause writers to memory.high to get stuck in the kernel forever,
performing page reclaim and consuming excessive amounts of CPU cycles.
Before the patch, a write to memory.high would first put the new limit
in place for the workload, and then reclaim the requested delta. After
the patch, the kernel tries to reclaim the delta before putting the new
limit into place, in order to not overwhelm the workload with a sudden,
large excess over the limit. However, if reclaim is actively racing
with new allocations from the uncurbed workload, it can keep the write()
working inside the kernel indefinitely.
This is causing problems in Facebook production. A privileged
system-level daemon that adjusts memory.high for various workloads
running on a host can get unexpectedly stuck in the kernel and
essentially turn into a sort of involuntary kswapd for one of the
workloads. We've observed that daemon busy-spin in a write() for
minutes at a time, neglecting its other duties on the system, and
expending privileged system resources on behalf of a workload.
To remedy this, we have first considered changing the reclaim logic to
break out after a couple of loops - whether the workload has converged
to the new limit or not - and bound the write() call this way. However,
the root cause that inspired the sequence change in the first place has
been fixed through other means, and so a revert back to the proven
limit-setting sequence, also used by memory.max, is preferable.
The sequence was changed to avoid extreme latencies in the workload when
the limit was lowered: the sudden, large excess created by the limit
lowering would erroneously trigger the penalty sleeping code that is
meant to throttle excessive growth from below. Allocating threads could
end up sleeping long after the write() had already reclaimed the delta
for which they were being punished.
However, erroneous throttling also caused problems in other scenarios at
around the same time. This resulted in commit b3ff92916af3 ("mm, memcg:
reclaim more aggressively before high allocator throttling"), included
in the same release as the offending commit. When allocating threads
now encounter large excess caused by a racing write() to memory.high,
instead of entering punitive sleeps, they will simply be tasked with
helping reclaim down the excess, and will be held no longer than it
takes to accomplish that. This is in line with regular limit
enforcement - i.e. if the workload allocates up against or over an
otherwise unchanged limit from below.
With the patch breaking userspace, and the root cause addressed by other
means already, revert it again.
Link: https://lkml.kernel.org/r/20210122184341.292461-1-hannes@cmpxchg.org
Fixes: 536d3bf261a2 ("mm: memcontrol: avoid workload stalls when lowering memory.high")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit da74240eb3fcd806edb1643874363e954d9e948b upstream.
Commit 3fea5a499d57 ("mm: memcontrol: convert page cache to a new
mem_cgroup_charge() API") introduced a bug in __add_to_page_cache_locked()
causing the following splat:
page dumped because: VM_BUG_ON_PAGE(page_memcg(page))
pages's memcg:ffff8889a4116000
------------[ cut here ]------------
kernel BUG at mm/memcontrol.c:2924!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 35 PID: 12345 Comm: cat Tainted: G S W I 5.11.0-rc4-debug+ #1
Hardware name: HP HP Z8 G4 Workstation/81C7, BIOS P60 v01.25 12/06/2017
RIP: commit_charge+0xf4/0x130
Call Trace:
mem_cgroup_charge+0x175/0x770
__add_to_page_cache_locked+0x712/0xad0
add_to_page_cache_lru+0xc5/0x1f0
cachefiles_read_or_alloc_pages+0x895/0x2e10 [cachefiles]
__fscache_read_or_alloc_pages+0x6c0/0xa00 [fscache]
__nfs_readpages_from_fscache+0x16d/0x630 [nfs]
nfs_readpages+0x24e/0x540 [nfs]
read_pages+0x5b1/0xc40
page_cache_ra_unbounded+0x460/0x750
generic_file_buffered_read_get_pages+0x290/0x1710
generic_file_buffered_read+0x2a9/0xc30
nfs_file_read+0x13f/0x230 [nfs]
new_sync_read+0x3af/0x610
vfs_read+0x339/0x4b0
ksys_read+0xf1/0x1c0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Before that commit, there was a try_charge() and commit_charge() in
__add_to_page_cache_locked(). These two separated charge functions were
replaced by a single mem_cgroup_charge(). However, it forgot to add a
matching mem_cgroup_uncharge() when the xarray insertion failed with the
page released back to the pool.
Fix this by adding a mem_cgroup_uncharge() call when insertion error
happens.
Link: https://lkml.kernel.org/r/20210125042441.20030-1-longman@redhat.com
Fixes: 3fea5a499d57 ("mm: memcontrol: convert page cache to a new mem_cgroup_charge() API")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <smuchun@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1c2f67308af4c102b4e1e6cd6f69819ae59408e0 upstream.
Sergey reported deadlock between kswapd correctly doing its usual
lock_page(page) followed by down_read(page->mapping->i_mmap_rwsem), and
madvise(MADV_REMOVE) on an madvise(MADV_HUGEPAGE) area doing
down_write(page->mapping->i_mmap_rwsem) followed by lock_page(page).
This happened when shmem_fallocate(punch hole)'s unmap_mapping_range()
reaches zap_pmd_range()'s call to __split_huge_pmd(). The same deadlock
could occur when partially truncating a mapped huge tmpfs file, or using
fallocate(FALLOC_FL_PUNCH_HOLE) on it.
__split_huge_pmd()'s page lock was added in 5.8, to make sure that any
concurrent use of reuse_swap_page() (holding page lock) could not catch
the anon THP's mapcounts and swapcounts while they were being split.
Fortunately, reuse_swap_page() is never applied to a shmem or file THP
(not even by khugepaged, which checks PageSwapCache before calling), and
anonymous THPs are never created in shmem or file areas: so that
__split_huge_pmd()'s page lock can only be necessary for anonymous THPs,
on which there is no risk of deadlock with i_mmap_rwsem.
Link: https://lkml.kernel.org/r/alpine.LSU.2.11.2101161409470.2022@eggly.anvils
Fixes: c444eb564fb1 ("mm: thp: make the THP mapcount atomic against __split_huge_pmd_locked()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74e21484e40bb8ce0f9828bbfe1c9fc9b04249c6 upstream.
In fast_isolate_freepages, high_pfn will be used if a prefered one (ie
PFN >= low_fn) not found.
But the high_pfn is not reset before searching an free area, so when it
was used as freepage, it may from another free area searched before. As
a result move_freelist_head(freelist, freepage) will have unexpected
behavior (eg corrupt the MOVABLE freelist)
Unable to handle kernel paging request at virtual address dead000000000200
Mem abort info:
ESR = 0x96000044
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000044
CM = 0, WnR = 1
[dead000000000200] address between user and kernel address ranges
-000|list_cut_before(inline)
-000|move_freelist_head(inline)
-000|fast_isolate_freepages(inline)
-000|isolate_freepages(inline)
-000|compaction_alloc(?, ?)
-001|unmap_and_move(inline)
-001|migrate_pages([NSD:0xFFFFFF80088CBBD0] from = 0xFFFFFF80088CBD88, [NSD:0xFFFFFF80088CBBC8] get_new_p
-002|__read_once_size(inline)
-002|static_key_count(inline)
-002|static_key_false(inline)
-002|trace_mm_compaction_migratepages(inline)
-002|compact_zone(?, [NSD:0xFFFFFF80088CBCB0] capc = 0x0)
-003|kcompactd_do_work(inline)
-003|kcompactd([X19] p = 0xFFFFFF93227FBC40)
-004|kthread([X20] _create = 0xFFFFFFE1AFB26380)
-005|ret_from_fork(asm)
The issue was reported on an smart phone product with 6GB ram and 3GB
zram as swap device.
This patch fixes the issue by reset high_pfn before searching each free
area, which ensure freepage and freelist match when call
move_freelist_head in fast_isolate_freepages().
Link: http://lkml.kernel.org/r/20190118175136.31341-12-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20210112094720.1238444-1-wu-yan@tcl.com
Fixes: 5a811889de10f1eb ("mm, compaction: use free lists to quickly locate a migration target")
Signed-off-by: Rokudo Yan <wu-yan@tcl.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ecbf4724e6061b4b01be20f6d797d64d462b2bc8 upstream.
The page_huge_active() can be called from scan_movable_pages() which do
not hold a reference count to the HugeTLB page. So when we call
page_huge_active() from scan_movable_pages(), the HugeTLB page can be
freed parallel. Then we will trigger a BUG_ON which is in the
page_huge_active() when CONFIG_DEBUG_VM is enabled. Just remove the
VM_BUG_ON_PAGE.
Link: https://lkml.kernel.org/r/20210115124942.46403-6-songmuchun@bytedance.com
Fixes: 7e1f049efb86 ("mm: hugetlb: cleanup using paeg_huge_active()")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0eb2df2b5629794020f75e94655e1994af63f0d4 upstream.
There is a race between isolate_huge_page() and __free_huge_page().
CPU0: CPU1:
if (PageHuge(page))
put_page(page)
__free_huge_page(page)
spin_lock(&hugetlb_lock)
update_and_free_page(page)
set_compound_page_dtor(page,
NULL_COMPOUND_DTOR)
spin_unlock(&hugetlb_lock)
isolate_huge_page(page)
// trigger BUG_ON
VM_BUG_ON_PAGE(!PageHead(page), page)
spin_lock(&hugetlb_lock)
page_huge_active(page)
// trigger BUG_ON
VM_BUG_ON_PAGE(!PageHuge(page), page)
spin_unlock(&hugetlb_lock)
When we isolate a HugeTLB page on CPU0. Meanwhile, we free it to the
buddy allocator on CPU1. Then, we can trigger a BUG_ON on CPU0, because
it is already freed to the buddy allocator.
Link: https://lkml.kernel.org/r/20210115124942.46403-5-songmuchun@bytedance.com
Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ffddd499ba6122b1a07828f023d1d67629aa017 upstream.
There is a race condition between __free_huge_page()
and dissolve_free_huge_page().
CPU0: CPU1:
// page_count(page) == 1
put_page(page)
__free_huge_page(page)
dissolve_free_huge_page(page)
spin_lock(&hugetlb_lock)
// PageHuge(page) && !page_count(page)
update_and_free_page(page)
// page is freed to the buddy
spin_unlock(&hugetlb_lock)
spin_lock(&hugetlb_lock)
clear_page_huge_active(page)
enqueue_huge_page(page)
// It is wrong, the page is already freed
spin_unlock(&hugetlb_lock)
The race window is between put_page() and dissolve_free_huge_page().
We should make sure that the page is already on the free list when it is
dissolved.
As a result __free_huge_page would corrupt page(s) already in the buddy
allocator.
Link: https://lkml.kernel.org/r/20210115124942.46403-4-songmuchun@bytedance.com
Fixes: c8721bbbdd36 ("mm: memory-hotplug: enable memory hotplug to handle hugepage")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 585fc0d2871c9318c949fbf45b1f081edd489e96 upstream.
If a new hugetlb page is allocated during fallocate it will not be
marked as active (set_page_huge_active) which will result in a later
isolate_huge_page failure when the page migration code would like to
move that page. Such a failure would be unexpected and wrong.
Only export set_page_huge_active, just leave clear_page_huge_active as
static. Because there are no external users.
Link: https://lkml.kernel.org/r/20210115124942.46403-3-songmuchun@bytedance.com
Fixes: 70c3547e36f5 (hugetlbfs: add hugetlbfs_fallocate())
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2dcb3964544177c51853a210b6ad400de78ef17d ]
With kaslr the kernel image is placed at a random place, so starting the
bottom-up allocation with the kernel_end can result in an allocation
failure and a warning like this one:
hugetlb_cma: reserve 2048 MiB, up to 2048 MiB per node
------------[ cut here ]------------
memblock: bottom-up allocation failed, memory hotremove may be affected
WARNING: CPU: 0 PID: 0 at mm/memblock.c:332 memblock_find_in_range_node+0x178/0x25a
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0+ #1169
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:memblock_find_in_range_node+0x178/0x25a
Code: e9 6d ff ff ff 48 85 c0 0f 85 da 00 00 00 80 3d 9b 35 df 00 00 75 15 48 c7 c7 c0 75 59 88 c6 05 8b 35 df 00 01 e8 25 8a fa ff <0f> 0b 48 c7 44 24 20 ff ff ff ff 44 89 e6 44 89 ea 48 c7 c1 70 5c
RSP: 0000:ffffffff88803d18 EFLAGS: 00010086 ORIG_RAX: 0000000000000000
RAX: 0000000000000000 RBX: 0000000240000000 RCX: 00000000ffffdfff
RDX: 00000000ffffdfff RSI: 00000000ffffffea RDI: 0000000000000046
RBP: 0000000100000000 R08: ffffffff88922788 R09: 0000000000009ffb
R10: 00000000ffffe000 R11: 3fffffffffffffff R12: 0000000000000000
R13: 0000000000000000 R14: 0000000080000000 R15: 00000001fb42c000
FS: 0000000000000000(0000) GS:ffffffff88f71000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa080fb401000 CR3: 00000001fa80a000 CR4: 00000000000406b0
Call Trace:
memblock_alloc_range_nid+0x8d/0x11e
cma_declare_contiguous_nid+0x2c4/0x38c
hugetlb_cma_reserve+0xdc/0x128
flush_tlb_one_kernel+0xc/0x20
native_set_fixmap+0x82/0xd0
flat_get_apic_id+0x5/0x10
register_lapic_address+0x8e/0x97
setup_arch+0x8a5/0xc3f
start_kernel+0x66/0x547
load_ucode_bsp+0x4c/0xcd
secondary_startup_64_no_verify+0xb0/0xbb
random: get_random_bytes called from __warn+0xab/0x110 with crng_init=0
---[ end trace f151227d0b39be70 ]---
At the same time, the kernel image is protected with memblock_reserve(),
so we can just start searching at PAGE_SIZE. In this case the bottom-up
allocation has the same chances to success as a top-down allocation, so
there is no reason to fallback in the case of a failure. All together it
simplifies the logic.
Link: https://lkml.kernel.org/r/20201217201214.3414100-2-guro@fb.com
Fixes: 8fabc623238e ("powerpc: Ensure that swiotlb buffer is allocated from low memory")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Wonhyuk Yang <vvghjk1234@gmail.com>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit b50da6e9f42ade19141f6cf8870bb2312b055aa3 upstream.
The scenario on which "Free swap = -4kB" happens in my system, which is caused
by several get_swap_pages racing with each other and show_swap_cache_info
happens simutaniously. No need to add a lock on get_swap_page_of_type as we
remove "Presub/PosAdd" here.
ProcessA ProcessB ProcessC
ngoals = 1 ngoals = 1
avail = nr_swap_pages(1) avail = nr_swap_pages(1)
nr_swap_pages(1) -= ngoals
nr_swap_pages(0) -= ngoals
nr_swap_pages = -1
Link: https://lkml.kernel.org/r/1607050340-4535-1-git-send-email-zhaoyang.huang@unisoc.com
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ce8f86ee94fabcc98537ddccd7e82cfd360a4dc5 upstream.
The trace point *trace_mm_page_alloc_zone_locked()* in __rmqueue() does
not currently cover all branches. Add the missing tracepoint and check
the page before do that.
[akpm@linux-foundation.org: use IS_ENABLED() to suppress warning]
Link: https://lkml.kernel.org/r/20201228132901.41523-1-carver4lio@163.com
Signed-off-by: Hailong liu <liu.hailong6@zte.com.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 757fed1d0898b893d7daa84183947c70f27632f3 upstream.
This reverts commit dde3c6b72a16c2db826f54b2d49bdea26c3534a2.
syzbot report a double-free bug. The following case can cause this bug.
- mm/slab_common.c: create_cache(): if the __kmem_cache_create() fails,
it does:
out_free_cache:
kmem_cache_free(kmem_cache, s);
- but __kmem_cache_create() - at least for slub() - will have done
sysfs_slab_add(s)
-> sysfs_create_group() .. fails ..
-> kobject_del(&s->kobj); .. which frees s ...
We can't remove the kmem_cache_free() in create_cache(), because other
error cases of __kmem_cache_create() do not free this.
So, revert the commit dde3c6b72a16 ("mm/slub: fix a memory leak in
sysfs_slab_add()") to fix this.
Reported-by: syzbot+d0bd96b4696c1ef67991@syzkaller.appspotmail.com
Fixes: dde3c6b72a16 ("mm/slub: fix a memory leak in sysfs_slab_add()")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 377bf660d07a47269510435d11f3b65d53edca20 upstream.
This reverts commit d3921cb8be29ce5668c64e23ffdaeec5f8c69399.
Chris Wilson reports that it causes boot problems:
"We have half a dozen or so different machines in CI that are silently
failing to boot, that we believe is bisected to this patch"
and the CI team confirmed that a revert fixed the issues.
The cause is unknown for now, so let's revert it.
Link: https://lore.kernel.org/lkml/161160687463.28991.354987542182281928@build.alporthouse.com/
Reported-and-tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3921cb8be29ce5668c64e23ffdaeec5f8c69399 upstream.
There could be struct pages that are not backed by actual physical
memory. This can happen when the actual memory bank is not a multiple
of SECTION_SIZE or when an architecture does not register memory holes
reserved by the firmware as memblock.memory.
Such pages are currently initialized using init_unavailable_mem()
function that iterates through PFNs in holes in memblock.memory and if
there is a struct page corresponding to a PFN, the fields if this page
are set to default values and the page is marked as Reserved.
init_unavailable_mem() does not take into account zone and node the page
belongs to and sets both zone and node links in struct page to zero.
On a system that has firmware reserved holes in a zone above ZONE_DMA,
for instance in a configuration below:
# grep -A1 E820 /proc/iomem
7a17b000-7a216fff : Unknown E820 type
7a217000-7bffffff : System RAM
unset zone link in struct page will trigger
VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page);
because there are pages in both ZONE_DMA32 and ZONE_DMA (unset zone link
in struct page) in the same pageblock.
Update init_unavailable_mem() to use zone constraints defined by an
architecture to properly setup the zone link and use node ID of the
adjacent range in memblock.memory to set the node link.
Link: https://lkml.kernel.org/r/20210111194017.22696-3-rppt@kernel.org
Fixes: 73a6e474cb37 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5dabd1712cd056814f9ab15f1d68157ceb04e741 upstream.
kasan_remove_zero_shadow() shall use original virtual address, start and
size, instead of shadow address.
Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a11a496ee6e2ab6ed850233c96b94caf042af0b9 upstream.
During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.
In the test case for kasan_remove_zero_shadow():
shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000
3-level page table:
PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K
0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.
In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.
Fix by correcting the condition when next and addr are neither aligned.
Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c447d274f3746fbed6e695e7b9a2d7bd8b31b71 upstream.
Currently the kernel is not correctly updating the numa stats for
NR_FILE_PAGES and NR_SHMEM on THP migration. Fix that.
For NR_FILE_DIRTY and NR_ZONE_WRITE_PENDING, although at the moment
there is no need to handle THP migration as kernel still does not have
write support for file THP but to be more future proof, this patch adds
the THP support for those stats as well.
Link: https://lkml.kernel.org/r/20210108155813.2914586-2-shakeelb@google.com
Fixes: e71769ae52609 ("mm: enable thp migration for shmem thp")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a8792f600abacd7e1b9bb667759dca1c153f64c upstream.
The kernel updates the per-node NR_FILE_DIRTY stats on page migration
but not the memcg numa stats.
That was not an issue until recently the commit 5f9a4f4a7096 ("mm:
memcontrol: add the missing numa_stat interface for cgroup v2") exposed
numa stats for the memcg.
So fix the file_dirty per-memcg numa stat.
Link: https://lkml.kernel.org/r/20210108155813.2914586-1-shakeelb@google.com
Fixes: 5f9a4f4a7096 ("mm: memcontrol: add the missing numa_stat interface for cgroup v2")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
