summaryrefslogtreecommitdiff
path: root/net/bluetooth/hci_core.c
AgeCommit message (Collapse)Author
2020-09-29Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-09-29 Here's the main bluetooth-next pull request for 5.10: - Multiple fixes to suspend/resume handling - Added mgmt events for controller suspend/resume state - Improved extended advertising support - btintel: Enhanced support for next generation controllers - Added Qualcomm Bluetooth SoC WCN6855 support - Several other smaller fixes & improvements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20Bluetooth: Update Adv monitor count upon removalMiao-chen Chou
This fixes the count of Adv monitor upon monitor removal. The following test was performed. - Start two btmgmt consoles, issue a btmgmt advmon-remove command on one console and observe a MGMT_EV_ADV_MONITOR_REMOVED event on the other. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Howard Chung <howardchung@google.com> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-18net: bluetooth: delete duplicated wordsRandy Dunlap
Drop repeated words in net/bluetooth/. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-13Bluetooth: Emit controller suspend and resume eventsAbhishek Pandit-Subedi
Emit controller suspend and resume events when we are ready for suspend and we've resumed from suspend. The controller suspend event will report whatever suspend state was successfully entered. The controller resume event will check the first HCI event that was received after we finished preparing for suspend and, if it was a connection event, store the address of the peer that caused the event. If it was not a connection event, we mark the wake reason as an unexpected event. Here is a sample btmon trace with these events: @ MGMT Event: Controller Suspended (0x002d) plen 1 Suspend state: Page scanning and/or passive scanning (2) @ MGMT Event: Controller Resumed (0x002e) plen 8 Wake reason: Remote wake due to peer device connection (2) LE Address: CD:F3:CD:13:C5:9A (OUI CD-F3-CD) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Report num supported adv instances for hw offloadingDaniel Winkler
Here we make sure we properly report the number of supported advertising slots when we are using hardware offloading. If no hardware offloading is available, we default this value to HCI_MAX_ADV_INSTANCES for use in software rotation as before. This change has been tested on kukui (no ext adv) and hatch (ext adv) chromebooks by verifying "SupportedInstances" shows 5 (the default) and 6 (slots supported by controller), respectively. Signed-off-by: Daniel Winkler <danielwinkler@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-11Bluetooth: Re-order clearing suspend tasksAbhishek Pandit-Subedi
Unregister_pm_notifier is a blocking call so suspend tasks should be cleared beforehand. Otherwise, the notifier will wait for completion before returning (and we encounter a 2s timeout on resume). Fixes: 0e9952804ec9c8 (Bluetooth: Clear suspend tasks on unregister) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-09-01Bluetooth: Clear suspend tasks on unregisterAbhishek Pandit-Subedi
While unregistering, make sure to clear the suspend tasks before cancelling the work. If the unregister is called during resume from suspend, this will unnecessarily add 2s to the resume time otherwise. Fixes: 4e8c36c3b0d73d (Bluetooth: Fix suspend notifier race) Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Enable RPA TimeoutSathish Narasimman
Enable RPA timeout during bluetooth initialization. The RPA timeout value is used from hdev, which initialized from debug_fs Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-30Bluetooth: Translate additional address type correctlyMarcel Holtmann
When using controller based address resolution, then the new address types 0x02 and 0x03 are used. These types need to be converted back into either public address or random address types. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-28Bluetooth: Fix suspend notifier raceAbhishek Pandit-Subedi
Unregister from suspend notifications and cancel suspend preparations before running hci_dev_do_close. Otherwise, the suspend notifier may race with unregister and cause cmd_timeout even after hdev has been freed. Below is the trace from when this panic was seen: [ 832.578518] Bluetooth: hci_core.c:hci_cmd_timeout() hci0: command 0x0c05 tx timeout [ 832.586200] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 832.586203] #PF: supervisor read access in kernel mode [ 832.586205] #PF: error_code(0x0000) - not-present page [ 832.586206] PGD 0 P4D 0 [ 832.586210] PM: suspend exit [ 832.608870] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 832.613232] CPU: 3 PID: 10755 Comm: kworker/3:7 Not tainted 5.4.44-04894-g1e9dbb96a161 #1 [ 832.630036] Workqueue: events hci_cmd_timeout [bluetooth] [ 832.630046] RIP: 0010:__queue_work+0xf0/0x374 [ 832.630051] RSP: 0018:ffff9b5285f1fdf8 EFLAGS: 00010046 [ 832.674033] RAX: ffff8a97681bac00 RBX: 0000000000000000 RCX: ffff8a976a000600 [ 832.681162] RDX: 0000000000000000 RSI: 0000000000000009 RDI: ffff8a976a000748 [ 832.688289] RBP: ffff9b5285f1fe38 R08: 0000000000000000 R09: ffff8a97681bac00 [ 832.695418] R10: 0000000000000002 R11: ffff8a976a0006d8 R12: ffff8a9745107600 [ 832.698045] usb 1-6: new full-speed USB device number 119 using xhci_hcd [ 832.702547] R13: ffff8a9673658850 R14: 0000000000000040 R15: 000000000000001e [ 832.702549] FS: 0000000000000000(0000) GS:ffff8a976af80000(0000) knlGS:0000000000000000 [ 832.702550] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 832.702550] CR2: 0000000000000000 CR3: 000000010415a000 CR4: 00000000003406e0 [ 832.702551] Call Trace: [ 832.702558] queue_work_on+0x3f/0x68 [ 832.702562] process_one_work+0x1db/0x396 [ 832.747397] worker_thread+0x216/0x375 [ 832.751147] kthread+0x138/0x140 [ 832.754377] ? pr_cont_work+0x58/0x58 [ 832.758037] ? kthread_blkcg+0x2e/0x2e [ 832.761787] ret_from_fork+0x22/0x40 [ 832.846191] ---[ end trace fa93f466da517212 ]--- Fixes: 9952d90ea2885 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND") Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-28Bluetooth: Return NOTIFY_DONE for hci_suspend_notifierMax Chou
The original return is NOTIFY_STOP, but notifier_call_chain would stop the future call for register_pm_notifier even registered on other Kernel modules with the same priority which value is zero. Signed-off-by: Max Chou <max.chou@realtek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-28Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllersIsmael Ferreras Morezuelas
For some reason they tend to squat on the very first CSR/ Cambridge Silicon Radio VID/PID instead of paying fees. This is an extremely common problem; the issue goes as back as 2013 and these devices are only getting more popular, even rebranded by reputable vendors and sold by retailers everywhere. So, at this point in time there are hundreds of modern dongles reusing the ID of what originally was an early Bluetooth 1.1 controller. Linux is the only place where they don't work due to spotty checks in our detection code. It only covered a minimum subset. So what's the big idea? Take advantage of the fact that all CSR chips report the same internal version as both the LMP sub-version and HCI revision number. It always matches, couple that with the manufacturer code, that rarely lies, and we now have a good idea of who is who. Additionally, by compiling a list of user-reported HCI/lsusb dumps, and searching around for legit CSR dongles in similar product ranges we can find what CSR BlueCore firmware supported which Bluetooth versions. That way we can narrow down ranges of fakes for each of them. e.g. Real CSR dongles with LMP subversion 0x73 are old enough that support BT 1.1 only; so it's a dead giveaway when some third-party BT 4.0 dongle reuses it. So, to sum things up; there are multiple classes of fake controllers reusing the same 0A12:0001 VID/PID. This has been broken for a while. Known 'fake' bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891 IC markings on 0x7558: FR3191AHAL 749H15143 (???) https://bugzilla.kernel.org/show_bug.cgi?id=60824 Fixes: 81cac64ba258ae (Deal with USB devices that are faking CSR vendor) Reported-by: Michał Wiśniewski <brylozketrzyn@gmail.com> Tested-by: Mike Johnson <yuyuyak@gmail.com> Tested-by: Ricardo Rodrigues <ekatonb@gmail.com> Tested-by: M.Hanny Sabbagh <mhsabbagh@outlook.com> Tested-by: Oussama BEN BRAHIM <b.brahim.oussama@gmail.com> Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-07Bluetooth: Fix kernel oops triggered by hci_adv_monitors_clear()Miao-chen Chou
This fixes the kernel oops by removing unnecessary background scan update from hci_adv_monitors_clear() which shouldn't invoke any work queue. The following test was performed. - Run "rmmod btusb" and verify that no kernel oops is triggered. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-07-07Bluetooth: Adding a configurable autoconnect timeoutAlain Michaud
This patch adds a configurable LE autoconnect timeout. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-18Bluetooth: Update background scan and report device based on advertisement ↵Miao-chen Chou
monitors This calls hci_update_background_scan() when there is any update on the advertisement monitors. If there is at least one advertisement monitor, the filtering policy of scan parameters should be 0x00. This also reports device found mgmt events if there is at least one monitor. The following cases were tested with btmgmt advmon-* commands. (1) add a ADV monitor and observe that the passive scanning is triggered. (2) remove the last ADV monitor and observe that the passive scanning is terminated. (3) with a LE peripheral paired, repeat (1) and observe the passive scanning continues. (4) with a LE peripheral paired, repeat (2) and observe the passive scanning continues. (5) with a ADV monitor, suspend/resume the host and observe the passive scanning continues. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_REMOVE_ADV_MONITORMiao-chen Chou
This adds the request handler of MGMT_OP_REMOVE_ADV_MONITOR command. Note that the controller-based monitoring is not yet in place. This removes the internal monitor(s) without sending HCI traffic, so the request returns immediately. The following test was performed. - Issue btmgmt advmon-remove with valid and invalid handles. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_ADD_ADV_PATTERNS_MONITORMiao-chen Chou
This adds the request handler of MGMT_OP_ADD_ADV_PATTERNS_MONITOR command. Note that the controller-based monitoring is not yet in place. This tracks the content of the monitor without sending HCI traffic, so the request returns immediately. The following manual test was performed. - Issue btmgmt advmon-add with valid and invalid inputs. - Issue btmgmt advmon-add more the allowed number of monitors. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add handler of MGMT_OP_READ_ADV_MONITOR_FEATURESMiao-chen Chou
This adds the request handler of MGMT_OP_READ_ADV_MONITOR_FEATURES command. Since the controller-based monitoring is not yet in place, this report only the supported features but not the enabled features. The following test was performed. - Issuing btmgmt advmon-features. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Replace wakeable list with flagAbhishek Pandit-Subedi
Since the classic device list now supports flags, convert the wakeable list into a flag on the existing device list. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add bdaddr_list_with_flags for classic whitelistAbhishek Pandit-Subedi
In order to more easily add device flags to classic devices, create a new type of bdaddr_list that supports setting flags. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-12Bluetooth: centralize default value initialization.Alain Michaud
This patch centralized the initialization of default parameters. This is required to allow clients to more easily customize the default system parameters. Signed-off-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-12Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connectionsAlain Michaud
This change adds support for reporting the BT_PKT_STATUS to the socket CMSG data to allow the implementation of a packet loss correction on erroneous data received on the SCO socket. The patch was partially developed by Marcel Holtmann and validated by Hsin-yu Chao. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-08Bluetooth: Allow suspend even when preparation has failedAbhishek Pandit-Subedi
It is preferable to allow suspend even when Bluetooth has problems preparing for sleep. When Bluetooth fails to finish preparing for suspend, log the error and allow the suspend notifier to continue instead. To also make it clearer why suspend failed, change bt_dev_dbg to bt_dev_err when handling the suspend timeout. Fixes: dd522a7429b07e ("Bluetooth: Handle LE devices during suspend") Reported-by: Len Brown <len.brown@intel.com> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Add hook for driver to prevent wake from suspendAbhishek Pandit-Subedi
Let drivers have a hook to disable configuring scanning during suspend. Drivers should use the device_may_wakeup function call to determine whether hci should be configured for wakeup. For example, an implementation for btusb may look like the following: bool btusb_prevent_wake(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); return !device_may_wakeup(&data->udev->dev); } Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Rename BT_SUSPEND_COMPLETEAbhishek Pandit-Subedi
Renamed BT_SUSPEND_COMPLETE to BT_SUSPEND_CONFIGURE_WAKE since it sets up the event filter and whitelist for wake-up. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-16Bluetooth: Enhanced Connection Complete event belongs to LL PrivacyMarcel Holtmann
The Enhanced Connection Complete event is use in conjunction with LL Privacy and not Extended Advertising. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-15Bluetooth: Enable LE Enhanced Connection Complete event.Marcel Holtmann
In case LL Privacy is supported by the controller, it is also a good idea to use the LE Enhanced Connection Complete event for getting all information about the new connection and its addresses. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add support for Read Local Simple Pairing OptionsMarcel Holtmann
With the Read Local Simple Pairing Options command it is possible to retrieve the support for max encryption key size supported by the controller and also if the controller correctly verifies the ECDH public key during pairing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add framework for Microsoft vendor extensionMiao-chen Chou
Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-03Bluetooth: Prioritize SCO trafficAbhishek Pandit-Subedi
When scheduling TX packets, send all SCO/eSCO packets first, check for pending SCO/eSCO packets after every ACL/LE packet and send them if any are pending. This is done to make sure that we can meet SCO deadlines on slow interfaces like UART. If we were to queue up multiple ACL packets without checking for a SCO packet, we might miss the SCO timing. For example: The time it takes to send a maximum size ACL packet (1024 bytes): t = 10/8 * 1024 bytes * 8 bits/byte * 1 packet / baudrate where 10/8 is uart overhead due to start/stop bits per byte Replace t = 3.75ms (SCO deadline), which gives us a baudrate of 2730666. At a baudrate of 3000000, if we didn't check for SCO packets within 1024 bytes, we would miss the 3.75ms timing window. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-23Bluetooth: Restore running state if suspend failsAbhishek Pandit-Subedi
If Bluetooth fails to enter the suspended state correctly, restore the state to running (re-enabling scans). PM_POST_SUSPEND is only sent to notifiers that successfully return from PM_PREPARE_SUSPEND notification so we should recover gracefully if it fails. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-11Bluetooth: Handle BR/EDR devices during suspendAbhishek Pandit-Subedi
To handle BR/EDR devices, we first disable page scan and disconnect all connected devices. Once that is complete, we add event filters (for devices that can wake the system) and re-enable page scan. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-11Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPENDAbhishek Pandit-Subedi
Register for PM_SUSPEND_PREPARE and PM_POST_SUSPEND to make sure the Bluetooth controller is prepared correctly for suspend/resume. Implement the registration, scheduling and task handling portions only in this patch. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-11Bluetooth: fix off by one in err_data_reporting cmd masks.Alain Michaud
This change fixes the off by one error in the erroneous command bit masks which can lead to the erroneous data commands being sent to a controller that doesn't support them. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-08Bluetooth: Enable erroneous data reporting if WBS is supportedAlain Michaud
This change introduces a wide band speech setting which allows higher level clients to query the local controller support for wide band speech as well as set the setting state when the radio is powered off. Internally, this setting controls if erroneous data reporting is enabled on the controller. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-07Bluetooth: Fix calculation of SCO handle for packet processingMarcel Holtmann
When processing SCO packets, the handle is wrongly assumed as 16-bit value. The actual size is 12-bits and the other 4-bits are used for packet flags. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-02-28Bluetooth: Use list_for_each_entry_rcu() to traverse RCU list in RCU ↵Madhuparna Bhowmik
read-side CS In function hci_is_blocked_key() RCU list is traversed with list_for_each_entry() in RCU read-side CS. Use list_for_each_entry_rcu() instead. Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Fix Suspicious RCU usage warningsMadhuparna Bhowmik
The following functions in hci_core are always called with hdev->lock held. No need to use list_for_each_entry_rcu(), therefore change the usage of list_for_each_entry_rcu() in these functions to list_for_each_entry(). hci_link_keys_clear() hci_smp_ltks_clear() hci_smp_irks_clear() hci_blocked_keys_clear() Warning encountered with CONFIG_PROVE_RCU_LIST: [ 72.213184] ============================= [ 72.213188] WARNING: suspicious RCU usage [ 72.213192] 5.6.0-rc1+ #5 Not tainted [ 72.213195] ----------------------------- [ 72.213198] net/bluetooth/hci_core.c:2288 RCU-list traversed in non-reader section!! [ 72.213676] ============================= [ 72.213679] WARNING: suspicious RCU usage [ 72.213683] 5.6.0-rc1+ #5 Not tainted [ 72.213685] ----------------------------- [ 72.213689] net/bluetooth/hci_core.c:2298 RCU-list traversed in non-reader section!! [ 72.214195] ============================= [ 72.214198] WARNING: suspicious RCU usage [ 72.214201] 5.6.0-rc1+ #5 Not tainted [ 72.214204] ----------------------------- [ 72.214208] net/bluetooth/hci_core.c:2308 RCU-list traversed in non-reader section!! [ 333.456972] ============================= [ 333.456979] WARNING: suspicious RCU usage [ 333.457001] 5.6.0-rc1+ #5 Not tainted [ 333.457007] ----------------------------- [ 333.457014] net/bluetooth/hci_core.c:2318 RCU-list traversed in non-reader section!! Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-25Bluetooth: Add missing checks for HCI_ISODATA_PKT packet typeMarcel Holtmann
The checks for HCI_ISODATA_PKT packet type are required in a few additional locations to allow sending/receiving of this new packet type. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-01-15Bluetooth: Make use of __check_timeout on hci_sched_leLuiz Augusto von Dentz
This reuse __check_timeout on hci_sched_le following the same logic used hci_sched_acl. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-15Bluetooth: Implementation of MGMT_OP_SET_BLOCKED_KEYS.Alain Michaud
MGMT command is added to receive the list of blocked keys from user-space. The list is used to: 1) Block keys from being distributed by the device during the ke distribution phase of SMP. 2) Filter out any keys that were previously saved so they are no longer used. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-11-22Bluetooth: Allow combination of BDADDR_PROPERTY and INVALID_BDADDR quirksMarcel Holtmann
When utilizing BDADDR_PROPERTY and INVALID_BDADDR quirks together it results in an unconfigured controller even if the bootloader provides a valid address. Fix this by allowing a bootloader provided address to mark the controller as configured. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-10-17Bluetooth: hci_core: fix init for HCI_USER_CHANNELMattijs Korpershoek
During the setup() stage, HCI device drivers expect the chip to acknowledge its setup() completion via vendor specific frames. If userspace opens() such HCI device in HCI_USER_CHANNEL [1] mode, the vendor specific frames are never tranmitted to the driver, as they are filtered in hci_rx_work(). Allow HCI devices which operate in HCI_USER_CHANNEL mode to receive frames if the HCI device is is HCI_INIT state. [1] https://www.spinics.net/lists/linux-bluetooth/msg37345.html Fixes: 23500189d7e0 ("Bluetooth: Introduce new HCI socket channel for user operation") Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-16Bluetooth: missed cpu_to_le16 conversion in hci_init4_reqBen Dooks (Codethink)
It looks like in hci_init4_req() the request is being initialised from cpu-endian data but the packet is specified to be little-endian. This causes an warning from sparse due to __le16 to u16 conversion. Fix this by using cpu_to_le16() on the two fields in the packet. net/bluetooth/hci_core.c:845:27: warning: incorrect type in assignment (different base types) net/bluetooth/hci_core.c:845:27: expected restricted __le16 [usertype] tx_len net/bluetooth/hci_core.c:845:27: got unsigned short [usertype] le_max_tx_len net/bluetooth/hci_core.c:846:28: warning: incorrect type in assignment (different base types) net/bluetooth/hci_core.c:846:28: expected restricted __le16 [usertype] tx_time net/bluetooth/hci_core.c:846:28: got unsigned short [usertype] le_max_tx_time Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-17Bluetooth: Add debug setting for changing minimum encryption key sizeMarcel Holtmann
For testing and qualification purposes it is useful to allow changing the minimum encryption key size value that the host stack is going to enforce. This adds a new debugfs setting min_encrypt_key_size to achieve this functionality. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-07-06Bluetooth: Use controller sets when availableLuiz Augusto von Dentz
This makes use of controller sets when using Extended Advertising feature thus offloading the scheduling to the controller. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Add support for LE ping featureSpoorthi Ravishankar Koppad
Changes made to add HCI Write Authenticated Payload timeout command for LE Ping feature. As per the Core Specification 5.0 Volume 2 Part E Section 7.3.94, the following code changes implements HCI Write Authenticated Payload timeout command for LE Ping feature. Signed-off-by: Spoorthi Ravishankar Koppad <spoorthix.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-05Bluetooth: Ignore CC events not matching the last HCI commandJoão Paulo Rechi Vita
This commit makes the kernel not send the next queued HCI command until a command complete arrives for the last HCI command sent to the controller. This change avoids a problem with some buggy controllers (seen on two SKUs of QCA9377) that send an extra command complete event for the previous command after the kernel had already sent a new HCI command to the controller. The problem was reproduced when starting an active scanning procedure, where an extra command complete event arrives for the LE_SET_RANDOM_ADDR command. When this happends the kernel ends up not processing the command complete for the following commmand, LE_SET_SCAN_PARAM, and ultimately behaving as if a passive scanning procedure was being performed, when in fact controller is performing an active scanning procedure. This makes it impossible to discover BLE devices as no device found events are sent to userspace. This problem is reproducible on 100% of the attempts on the affected controllers. The extra command complete event can be seen at timestamp 27.420131 on the btmon logs bellow. Bluetooth monitor ver 5.50 = Note: Linux version 5.0.0+ (x86_64) 0.352340 = Note: Bluetooth subsystem version 2.22 0.352343 = New Index: 80:C5:F2:8F:87:84 (Primary,USB,hci0) [hci0] 0.352344 = Open Index: 80:C5:F2:8F:87:84 [hci0] 0.352345 = Index Info: 80:C5:F2:8F:87:84 (Qualcomm) [hci0] 0.352346 @ MGMT Open: bluetoothd (privileged) version 1.14 {0x0001} 0.352347 @ MGMT Open: btmon (privileged) version 1.14 {0x0002} 0.352366 @ MGMT Open: btmgmt (privileged) version 1.14 {0x0003} 27.302164 @ MGMT Command: Start Discovery (0x0023) plen 1 {0x0003} [hci0] 27.302310 Address type: 0x06 LE Public LE Random < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #1 [hci0] 27.302496 Address: 15:60:F2:91:B2:24 (Non-Resolvable) > HCI Event: Command Complete (0x0e) plen 4 #2 [hci0] 27.419117 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #3 [hci0] 27.419244 Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) > HCI Event: Command Complete (0x0e) plen 4 #4 [hci0] 27.420131 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #5 [hci0] 27.420259 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #6 [hci0] 27.420969 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) > HCI Event: Command Complete (0x0e) plen 4 #7 [hci0] 27.421983 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 4 {0x0003} [hci0] 27.422059 Start Discovery (0x0023) plen 1 Status: Success (0x00) Address type: 0x06 LE Public LE Random @ MGMT Event: Discovering (0x0013) plen 2 {0x0003} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0002} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) @ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci0] 27.422067 Address type: 0x06 LE Public LE Random Discovery: Enabled (0x01) Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-24Bluetooth: hci_core: Don't stop BT if the BD address missing in dtsBalakrishna Godavarthi
When flag HCI_QUIRK_USE_BDADDR_PROPERTY is set, we will read the bluetooth address from dts. If the bluetooth address node is missing from the dts we will enable it controller UNCONFIGURED state. This patch enables the normal flow even if the BD address is missing from the dts tree. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-26Bluetooth: Add quirk for reading BD_ADDR from fwnode propertyMatthias Kaehlcke
Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve the public Bluetooth address from the firmware node property 'local-bd-address'. If quirk is set and the property does not exist or is invalid the controller is marked as unconfigured. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.46.0) at 2025-08-02 11:46:49 +0000