Age | Commit message (Collapse) | Author |
|
The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.
It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32. It shoudln't have been a bitmap in the first
place. The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.
The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.
So just use a regular integer.
In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).
That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953fd221 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.
Fixes: fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
HCI_CONN_FLAG_REMOTE_WAKEUP can only be set if device can be programmed
in the allowlist which in case of device using RPA requires LL Privacy
support to be enabled.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215768
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
When an Advertisement Monitor is configured with SamplingPeriod 0xFF,
the controller reports only one adv report along with the MSFT Monitor
Device event.
When an advertiser matches multiple monitors, some controllers send one
adv report for each matched monitor; whereas, some controllers send just
one adv report for all matched monitors.
In such a case, report Adv Monitor Device Found event for each matched
monitor.
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Variable cur_len is being ininitialized with a value in the start of
a for-loop but this is never read, it is being re-assigned a new value
on the first statement in the for-loop. The initialization is redundant
and can be removed.
Cleans up clang scan build warning:
net/bluetooth/mgmt.c:7958:14: warning: Although the value stored to 'cur_len'
is used in the enclosing expression, the value is never actually read
from 'cur_len' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
net/dsa/dsa2.c
commit afb3cc1a397d ("net: dsa: unlock the rtnl_mutex when dsa_master_setup() fails")
commit e83d56537859 ("net: dsa: replay master state events in dsa_tree_{setup,teardown}_master")
https://lore.kernel.org/all/20220307101436.7ae87da0@canb.auug.org.au/
drivers/net/ethernet/intel/ice/ice.h
commit 97b0129146b1 ("ice: Fix error with handling of bonding MTU")
commit 43113ff73453 ("ice: add TTY for GNSS module for E810T device")
https://lore.kernel.org/all/20220310112843.3233bcf1@canb.auug.org.au/
drivers/staging/gdm724x/gdm_lte.c
commit fc7f750dc9d1 ("staging: gdm724x: fix use after free in gdm_lte_rx()")
commit 4bcc4249b4cf ("staging: Use netif_rx().")
https://lore.kernel.org/all/20220308111043.1018a59d@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The field adv_instance_cnt is always accessed within a device lock,
except in the function add_advertising. A concurrent remove of an
advertisement with adding another one could result in the if check
"if a new instance was actually added" to not trigger, resulting
in not triggering the "advertising added event".
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Don't populate the read-only array bt_uuid_any on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch introduce eir_skb_put_data() that can be used to simplify
operations on eir in goal of eliminating the necessity of intermediary
buffers.
eir_skb_put_data() is in pair to what eir_append_data() does with help of
eir_len, but without awkwardness when passing return value to skb_put() (as
it returns updated offset not size).
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This patch fixes skb allocation, as lack of space for ev might push skb
tail beyond its end.
Also introduce eir_precalc_len() that can be used instead of magic
numbers for similar eir operations on skb.
Fixes: cf1bce1de7eeb ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_FOUND")
Fixes: e96741437ef0a ("Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED")
Signed-off-by: Angela Czubak <acz@semihalf.com>
Signed-off-by: Marek Maslanka <mm@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Return value from mgmt_cmd_complete() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
net/batman-adv/hard-interface.c
commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check")
commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message")
https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/
net/smc/af_smc.c
commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails")
commit 462791bbfa35 ("net/smc: add sysctl interface for SMC")
https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is only one "goto done;" in set_device_flags() and this happens
*before* hci_dev_lock() is called, move the done label to after the
hci_dev_unlock() to fix the following unlock balance:
[ 31.493567] =====================================
[ 31.493571] WARNING: bad unlock balance detected!
[ 31.493576] 5.17.0-rc2+ #13 Tainted: G C E
[ 31.493581] -------------------------------------
[ 31.493584] bluetoothd/685 is trying to release lock (&hdev->lock) at:
[ 31.493594] [<ffffffffc07603f5>] set_device_flags+0x65/0x1f0 [bluetooth]
[ 31.493684] but there are no more locks to release!
Note this bug has been around for a couple of years, but before
commit fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
supported_flags was hardcoded to "((1U << HCI_CONN_FLAG_MAX) - 1)" so
the check for unsupported flags which does the "goto done;" never
triggered.
Fixes: fe92ee6425a2 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
A number of places in the MGMT handlers we examine the command queue for
other commands (in progress but not yet complete) that will interact
with the process being performed. However, not all commands go into the
queue if one of:
1. There is no negative side effect of consecutive or redundent commands
2. The command is entirely perform "inline".
This change examines each "pending command" check, and if it is not
needed, deletes the check. Of the remaining pending command checks, we
make sure that the command is in the pending queue by using the
mgmt_pending_add/mgmt_pending_remove pair rather than the
mgmt_pending_new/mgmt_pending_free pair.
Link: https://lore.kernel.org/linux-bluetooth/f648f2e11bb3c2974c32e605a85ac3a9fac944f1.camel@redhat.com/T/
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Increment the mgmt revision due to recent changes.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This patch introduces two new MGMT events for notifying the bluetoothd
whenever the controller starts/stops monitoring a device.
Test performed:
- Verified by logs that the MSFT Monitor Device is received from the
controller and the bluetoothd is notified whenever the controller
starts/stops monitoring a device.
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Reviewed-by: Miao-chen Chou <mcchou@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
There is a spelling mistake in a bt_dev_info message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
If controller/driver don't support LE simultaneous roles its UUID shall
be omitted when responding to MGMT_OP_READ_EXP_FEATURES_INFO.
This also rework the support introducing HCI_LE_SIMULTANEOUS_ROLES flag
so it can be detected when userspace wants to use or not.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This attempts to check if the controller can act as both central and
peripheral simultaneously and in case it does skip suspending
advertising or in case of directed advertising don't fail if scanning.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This makes use of mgmt_alloc_skb to build MGMT_EV_DEVICE_CONNECTED so
the data is copied directly to skb that is then sent using
mgmt_send_event_skb eliminating the necessity of intermediary buffers.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This makes use of mgmt_alloc_skb to build MGMT_EV_DEVICE_FOUND so the
data is copied directly to skb that is then sent using
mgmt_send_event_skb eliminating the necessity of intermediary buffers.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This introduces HCI_CONN_FLAG_DEVICE_PRIVACY which can be used by
userspace to indicate to the controller to use Device Privacy Mode to a
specific device.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This reworks hci_conn_params flags to use bitmap_* helpers and add
support for setting the supported flags in hdev->conn_flags so it can
easily be accessed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This make use of hci_dev_test_and_{set,clear}_flag instead of doing 2
operations in a row.
Fixes: cbbdfa6f33198 ("Bluetooth: Enable controller RPA resolution using Experimental feature")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Introducing NAME_REQUEST_FAILED flag that will be sent together with
device found event on name resolve failure. This will provide the
userspace with an information so it can decide not to resolve the
name for these devices in the future.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This makes MGMT_OP_SET_CONNEABLE use hci_cmd_sync_queue instead of
use a dedicated connetable_update work.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This makes MGMT_OP_SET_DISCOVERABLE use hci_cmd_sync_queue instead of
use a dedicated discoverable_update work.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch adds the support of the AOSP Bluetooth Quality Report
(BQR) events.
Multiple vendors have supported the AOSP Bluetooth Quality Report.
When a Bluetooth controller supports the capability, it can enable
the aosp capability through hci_set_aosp_capable. Then hci_core will
set up the hdev->aosp_set_quality_report callback through aosp_do_open
if the controller responds to support the quality report capability.
Note that Intel also supports a distinct telemetry quality report
specification. Intel sets up the hdev->set_quality_report callback
in the btusb driver module.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This makes hci_suspend_notifier use the hci_*_sync which can be
executed synchronously which is allowed in the suspend_notifier and
simplifies a lot of the handling since the status of each command can
be checked inline so no other work need to be scheduled thus can be
performed without using of a state machine.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
mgmt-tester paths:
Set SSP on - Success 2
Set Device ID - SSP off and Power on
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
mgmt-test paths:
Set Advertising on - Appearance 1
Set Advertising on - Local name 1
Set Advertising on - Name + Appear 1
Set Local Name - Success 2
Set Local Name - Success 3
Add Advertising - Success (Empty ScRsp)
Add Advertising - Success (ScRsp appear)
Add Advertising - Invalid Params (ScRsp appear long)
Add Advertising - Success (Complete name)
Add Advertising - Success (Shortened name)
Add Advertising - Success (Short name)
Add Advertising - Success (Name + data)
Add Advertising - Invalid Params (Name + data)
Add Advertising - Success (Name+data+appear)
Set appearance - BR/EDR LE
Set appearance - LE only
Add Ext Advertising - Success (Empty ScRsp)
Add Ext Advertising - Success (ScRsp appear)
Add Ext Advertising - Invalid Params (ScRsp appear long)
Add Ext Advertising - Success (Complete name)
Add Ext Advertising - Success (Shortened name)
Add Ext Advertising - Success (Short name)
Add Ext Advertising - Success (Name + data)
Add Ext Advertising - Invalid Params (Name + data)
Add Ext Advertising - Success (Name+data+appear)
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
mgmt-test paths:
Set powered on - Privacy and Advertising
Set Advertising on - Success 2
Set Advertising on - Appearance 1
Set Advertising on - Local name 1
Set Advertising on - Name + Appear 1
Add Advertising - Success 4
Add Advertising - Success 5
Add Ext Advertising - Success 4
Add Ext Advertising - Success 5
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
mgmt-test paths:
Set PHY 2m Success
Set PHY coded Succcess
Set PHY 1m 2m coded Succcess
Set PHY 2m tx success
Set PHY 2m rx success
Set PHY Invalid Param
Start Discovery - (2m, Scan Param)
Start Discovery - (coded, Scan Param)
Start Discovery - (1m, 2m, coded, Scan Param)
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Uses existing *_sync functions, but made hci_update_name_sync
non-static.
mgmt-test paths:
Set Advertising on - Local name 1
Set Advertising on - Name + Appear 1
Set Local Name - Success 1
Set Local Name - Success 2
Set Local Name - Success 3
Add Advertising - Success (Empty ScRsp)
Add Advertising - Success (Complete name)
Add Advertising - Success (Shortened name)
Add Advertising - Success (Short name)
Add Advertising - Success (Name + data)
Add Advertising - Invalid Params (Name + data)
Add Advertising - Success (Name+data+appear)
Read Ext Controller Info 3
Read Ext Controller Info 4
Read Ext Controller Info 5
Add Ext Advertising - Success (Empty ScRsp)
Add Ext Advertising - Success (Complete name)
Add Ext Advertising - Success (Shortened name)
Add Ext Advertising - Success (Short name)
Add Ext Advertising - Success (Name + data)
Add Ext Advertising - Invalid Params (Name + data)
Add Ext Advertising - Success (Name+data+appear)
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Uses existing *_sync functions
mgmt-test paths:
Read Local OOB Ext Data - Invalid index
Read Local OOB Ext Data - Legacy pairing
Read Local OOB Ext Data - Success SSP
Read Local OOB Ext Data - Success SC
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
New functions:
hci_read_local_oob_data_sync
This function requires all of the data from the cmd cmplt event
to be passed up to the caller via the skb.
mgmt-tester paths:
Read Local OOB Data - Not powered
Read Local OOB Data - Legacy pairing
Read Local OOB Data - Success SSP
Read Local OOB Data - Success SC
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Uses:
hci_disable_advertising_sync
hci_remove_ext_adv_instance_sync
hci_write_le_host_supported_sync
hci_setup_ext_adv_instance_sync
hci_update_scan_rsp_data_sync
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Synchronous version of MGMT_OP_GET_CLOCK_INFO.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Synchronous version of MGMT_OP_SET_SECURE_CONN.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Synchronous version of MGMT_OP_GET_CONN_INFO
Implements:
hci_read_rssi_sync
hci_read_tx_power_sync
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Uses previously written:
hci_write_fast_connectable_sync
hci_update_scan_sync
hci_update_adv_data_sync
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This creates a synchronized Write Fast Connectable call and attaches it
to the MGMT_OP_SET_FAST_CONNECTABLE management opcode.
Signed-off-by: Brian Gix <brian.gix@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This make use of hci_cmd_sync_queue for MGMT_OP_START_DISCOVERY,
MGMT_OP_START_SERVICE_DISCOVERY and MGMT_OP_STOP_DISCOVERY to use
hci_cmd_sync_queue so they no longer depend on hdev->discov_update work
to send any commands.
Tested with:
tools/mgmt-tester -s "Start Discovery"
Test Summary
------------
Start Discovery - Not powered 1 Passed
Start Discovery - Invalid parameters 1 Passed
Start Discovery - Not supported 1 Passed
Start Discovery - Success 1 Passed
Start Discovery - Success 2 Passed
Start Discovery - Power Off 1 Passed
Start Discovery BREDR LE - (Ext Scan Enable) Passed
Start Discovery LE - (Ext Scan Enable) Passed
Start Discovery LE - (Ext Scan Param) Passed
Start Discovery - (2m, Scan Param) Passed
Start Discovery - (coded, Scan Param) Passed
Start Discovery - (1m, 2m, coded, Scan Param) Passed
LL Privacy - Start Discovery 1 (Disable RL) Passed
LL Privacy - Start Discovery 2 (Disable RL) Passed
Total: 14, Passed: 14 (100.0%), Failed: 0, Not Run: 0
tools/mgmt-tester -s "Start Service"
Test Summary
------------
Start Service Discovery - Not powered 1 Passed
Start Service Discovery - Invalid parameters 1 Passed
Start Service Discovery - Not supported 1 Passed
Start Service Discovery - Success 1 Passed
Start Service Discovery - Success 2 Passed
Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0
tools/mgmt-tester -s "Stop Discovery"
Test Summary
------------
Stop Discovery - Success 1 Passed
Stop Discovery - BR/EDR (Inquiry) Success 1 Passed
Stop Discovery - Rejected 1 Passed
Stop Discovery - Invalid parameters 1 Passed
Stop Discovery - (Ext Scan Disable) Passed
Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This make use of hci_cmd_sync_queue when MGMT_SET_POWERED is used so all
commands are run within hdev->cmd_sync_work instead of
hdev->power_on_work and hdev->power_off_work.
In addition to that the power on sequence now takes into account if
local IRK needs to be programmed in the resolving list.
Tested with:
tools/mgmt-tester -s "Set powered"
Test Summary
------------
Set powered on - Success Passed
Set powered on - Invalid parameters 1 Passed
Set powered on - Invalid parameters 2 Passed
Set powered on - Invalid parameters 3 Passed
Set powered on - Invalid index Passed
Set powered on - Privacy and Advertising Passed
Set powered off - Success Passed
Set powered off - Class of Device Passed
Set powered off - Invalid parameters 1 Passed
Set powered off - Invalid parameters 2 Passed
Set powered off - Invalid parameters 3 Passed
Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This replaces the use of hci_update_background_scan with
hci_update_passive_scan which runs from cmd_work_sync and deal properly
with resolving list when LL privacy is enabled.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This enables advertising when LL privacy is enabled and changes the
command sequence when resolving list is updated to also account for when
advertising is enabled using the following sequence:
If there are devices to scan:
Disable Scanning -> Update Accept List ->
use_ll_privacy((Disable Advertising) -> Disable Resolving List ->
Update Resolving List -> Enable Resolving List -> (Enable Advertising)) ->
Enable Scanning
Otherwise:
Disable Scanning
Errors during the Update Accept List stage are handled gracefully by
restoring any previous state (e.g. advertising) and disabling the use of
accept list as either accept list or resolving list could not be
updated.
Tested with:
mgmt-tester -s "LL Privacy"
Test Summary
------------
LL Privacy - Add Device 1 (Add to WL) Passed
LL Privacy - Add Device 2 (Add to RL) Passed
LL Privacy - Add Device 3 (Enable RL) Passed
LL Privacy - Add Device 4 (2 Devices to WL) Passed
LL Privacy - Add Device 5 (2 Devices to RL) Passed
LL Privacy - Add Device 6 (RL is full) Passed
LL Privacy - Add Device 7 (WL is full) Passed
LL Privacy - Add Device 8 (Disable Adv) Passed
LL Privacy - Add Device 9 (Multi Adv) Passed
LL Privacy - Add Device 10 (Multi Dev and Multi Adv) Passed
LL Privacy - Remove Device 1 (Remove from WL) Passed
LL Privacy - Remove Device 2 (Remove from RL) Passed
LL Privacy - Remove Device 3 (Disable RL) Passed
LL Privacy - Remove Device 4 (Disable Adv) Passed
LL Privacy - Remove Device 5 (Multi Adv) Passed
LL Privacy - Start Discovery 1 (Disable RL) Passed
LL Privacy - Start Discovery 2 (Disable RL) Passed
Total: 18, Passed: 18 (100.0%), Failed: 0, Not Run: 0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This make use of hci_cmd_sync_queue for the following MGMT commands:
Add Device
Remove Device
Tested with:
mgmt-tester -s "Add Device"
Test Summary
------------
Add Device - Invalid Params 1 Passed
Add Device - Invalid Params 2 Passed
Add Device - Invalid Params 3 Passed
Add Device - Invalid Params 4 Passed
Add Device - Success 1 Passed
Add Device - Success 2 Passed
Add Device - Success 3 Passed
Add Device - Success 4 Passed
Add Device - Success 5 Passed
Add Device - Success 6 - Add to whitelist Passed
Add Device - Success 7 - Add to resolv list Passed
Add Device - Success 8 - Enable resolv list Passed
Total: 12, Passed: 12 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.209 seconds
mgmt-tester -s "Remove Device"
Test Summary
------------
Remove Device - Invalid Params 1 Passed
Remove Device - Invalid Params 2 Passed
Remove Device - Invalid Params 3 Passed
Remove Device - Success 1 Passed
Remove Device - Success 2 Passed
Remove Device - Success 3 Passed
Remove Device - Success 4 Passed
Remove Device - Success 5 Passed
Remove Device - Success 6 - All Devices Passed
Remove Device - Success 7 - Remove from whitelist Passed
Remove Device - Success 8 - Remove from resolv list Passed
Total: 11, Passed: 11 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 4.26 seconds
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This make use of hci_cmd_sync_queue for the following MGMT commands:
Add Advertising
Remove Advertising
Add Extended Advertising Parameters
Add Extended Advertising Data
mgmt-tester -s "Add Advertising"
Test Summary
------------
Add Advertising - Failure: LE off Passed
Add Advertising - Invalid Params 1 (AD too long) Passed
Add Advertising - Invalid Params 2 (Malformed len) Passed
Add Advertising - Invalid Params 3 (Malformed len) Passed
Add Advertising - Invalid Params 4 (Malformed len) Passed
Add Advertising - Invalid Params 5 (AD too long) Passed
Add Advertising - Invalid Params 6 (ScRsp too long) Passed
Add Advertising - Invalid Params 7 (Malformed len) Passed
Add Advertising - Invalid Params 8 (Malformed len) Passed
Add Advertising - Invalid Params 9 (Malformed len) Passed
Add Advertising - Invalid Params 10 (ScRsp too long) Passed
Add Advertising - Rejected (Timeout, !Powered) Passed
Add Advertising - Success 1 (Powered, Add Adv Inst) Passed
Add Advertising - Success 2 (!Powered, Add Adv Inst) Passed
Add Advertising - Success 3 (!Powered, Adv Enable) Passed
Add Advertising - Success 4 (Set Adv on override) Passed
Add Advertising - Success 5 (Set Adv off override) Passed
Add Advertising - Success 6 (Scan Rsp Dta, Adv ok) Passed
Add Advertising - Success 7 (Scan Rsp Dta, Scan ok) Passed
Add Advertising - Success 8 (Connectable Flag) Passed
Add Advertising - Success 9 (General Discov Flag) Passed
Add Advertising - Success 10 (Limited Discov Flag) Passed
Add Advertising - Success 11 (Managed Flags) Passed
Add Advertising - Success 12 (TX Power Flag) Passed
Add Advertising - Success 13 (ADV_SCAN_IND) Passed
Add Advertising - Success 14 (ADV_NONCONN_IND) Passed
Add Advertising - Success 15 (ADV_IND) Passed
Add Advertising - Success 16 (Connectable -> on) Passed
Add Advertising - Success 17 (Connectable -> off) Passed
Add Advertising - Success 18 (Power -> off, Remove) Passed
Add Advertising - Success 19 (Power -> off, Keep) Passed
Add Advertising - Success 20 (Add Adv override) Passed
Add Advertising - Success 21 (Timeout expires) Passed
Add Advertising - Success 22 (LE -> off, Remove) Passed
Add Advertising - Success (Empty ScRsp) Passed
Add Advertising - Success (ScRsp only) Passed
Add Advertising - Invalid Params (ScRsp too long) Passed
Add Advertising - Success (ScRsp appear) Passed
Add Advertising - Invalid Params (ScRsp appear long) Passed
Add Advertising - Success (Appear is null) Passed
Add Advertising - Success (Name is null) Passed
Add Advertising - Success (Complete name) Passed
Add Advertising - Success (Shortened name) Passed
Add Advertising - Success (Short name) Passed
Add Advertising - Success (Name + data) Passed
Add Advertising - Invalid Params (Name + data) Passed
Add Advertising - Success (Name+data+appear) Passed
Total: 47, Passed: 47 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 2.17 seconds
mgmt-tester -s "Remove Advertising"
Test Summary
------------
Remove Advertising - Invalid Params 1 Passed
Remove Advertising - Success 1 Passed
Remove Advertising - Success 2 Passed
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0585 seconds
mgmt-tester -s "Ext Adv MGMT Params"
Test Summary:
------------
Ext Adv MGMT Params - Unpowered Passed
Ext Adv MGMT Params - Invalid parameters Passed
Ext Adv MGMT Params - Success Passed
Ext Adv MGMT Params - (5.0) Success Passed
Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0746 seconds
mgmt-tester -s "Ext Adv MGMT -"
Test Summary
------------
Ext Adv MGMT - Data set without Params Passed
Ext Adv MGMT - AD Data (5.0) Invalid parameters Passed
Ext Adv MGMT - AD Data (5.0) Success Passed
Ext Adv MGMT - AD Scan Response (5.0) Success Passed
Total: 4, Passed: 4 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0805 seconds
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This make use of hci_cmd_sync_queue for the following MGMT commands:
Set Device Class
Set Device ID
Add UUID
Remove UUID
tools/mgmt-tester -s "Set Device Class"
Test Summary
------------
Set Device Class - Success 1 Passed
Set Device Class - Success 2 Passed
Set Device Class - Invalid parameters 1 Passed
Total: 3, Passed: 3 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0599 seconds
tools/mgmt-tester -s "Set Device ID"
Test Summary
------------
Set Device ID - Success 1 Passed
Set Device ID - Success 2 Passed
Set Device ID - Disable Passed
Set Device ID - Power off and Power on Passed
Set Device ID - SSP off and Power on Passed
Set Device ID - Invalid Parameter Passed
Total: 6, Passed: 6 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.107 seconds
tools/mgmt-tester -s "Add UUID"
Test Summary
------------
Add UUID - UUID-16 1 Passed
Add UUID - UUID-16 multiple 1 Passed
Add UUID - UUID-16 partial 1 Passed
Add UUID - UUID-32 1 Passed
Add UUID - UUID-32 multiple 1 Passed
Add UUID - UUID-32 partial 1 Passed
Add UUID - UUID-128 1 Passed
Add UUID - UUID-128 multiple 1 Passed
Add UUID - UUID-128 partial 1 Passed
Add UUID - UUID mix Passed
Total: 10, Passed: 10 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.198 seconds
tools/mgmt-tester -s "Remove UUID"
Test Summary
------------
Remove UUID - Success 1 Passed
Remove UUID - All UUID - Success 2 Passed
Remove UUID - Power Off - Success 3 Passed
Remove UUID - Power Off and On - Success 4 Passed
Remove UUID - Not Exist - Invalid Params 1 Passed
Total: 5, Passed: 5 (100.0%), Failed: 0, Not Run: 0
Overall execution time: 0.0908 seconds
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
This patch fixes the controller index in the Experimental Features
Changed event for the offload_codec and the quality_report features to
use the actual hdev index instead of non-controller index(0xffff) so the
client can receive the event and know which controller the event is for.
Fixes: ad93315183285 ("Bluetooth: Add offload feature under experimental flag")
Fixes: ae7d925b5c043 ("Bluetooth: Support the quality report events")
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
The existence of the experimental feature identifiy is the indication
that it is supported or not. No extra flag needed and the initial flag
should define if a feature is enabled or not. This is actually defined
in the management API definition.
Fixes: ad93315183285 ("Bluetooth: Add offload feature under experimental flag")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|