Age | Commit message (Collapse) | Author |
|
[ Upstream commit 0ad6f6e767ec2f613418cbc7ebe5ec4c35af540c ]
Back in commit f60e5990d9c1 ("ipv6: protect skb->sk accesses
from recursive dereference inside the stack") Hannes added code
so that IPv6 stack would not trust skb->sk for typical cases
where packet goes through 'standard' xmit path (__dev_queue_xmit())
Alas af_packet had a dev_direct_xmit() path that was not
dealing yet with xmit_recursion level.
Also change sk_mc_loop() to dump a stack once only.
Without this patch, syzbot was able to trigger :
[1]
[ 153.567378] WARNING: CPU: 7 PID: 11273 at net/core/sock.c:721 sk_mc_loop+0x51/0x70
[ 153.567378] Modules linked in: nfnetlink ip6table_raw ip6table_filter iptable_raw iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 iptable_filter macsec macvtap tap macvlan 8021q hsr wireguard libblake2s blake2s_x86_64 libblake2s_generic udp_tunnel ip6_udp_tunnel libchacha20poly1305 poly1305_x86_64 chacha_x86_64 libchacha curve25519_x86_64 libcurve25519_generic netdevsim batman_adv dummy team bridge stp llc w1_therm wire i2c_mux_pca954x i2c_mux cdc_acm ehci_pci ehci_hcd mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core
[ 153.567386] CPU: 7 PID: 11273 Comm: b159172088 Not tainted 5.8.0-smp-DEV #273
[ 153.567387] RIP: 0010:sk_mc_loop+0x51/0x70
[ 153.567388] Code: 66 83 f8 0a 75 24 0f b6 4f 12 b8 01 00 00 00 31 d2 d3 e0 a9 bf ef ff ff 74 07 48 8b 97 f0 02 00 00 0f b6 42 3a 83 e0 01 5d c3 <0f> 0b b8 01 00 00 00 5d c3 0f b6 87 18 03 00 00 5d c0 e8 04 83 e0
[ 153.567388] RSP: 0018:ffff95c69bb93990 EFLAGS: 00010212
[ 153.567388] RAX: 0000000000000011 RBX: ffff95c6e0ee3e00 RCX: 0000000000000007
[ 153.567389] RDX: ffff95c69ae50000 RSI: ffff95c6c30c3000 RDI: ffff95c6c30c3000
[ 153.567389] RBP: ffff95c69bb93990 R08: ffff95c69a77f000 R09: 0000000000000008
[ 153.567389] R10: 0000000000000040 R11: 00003e0e00026128 R12: ffff95c6c30c3000
[ 153.567390] R13: ffff95c6cc4fd500 R14: ffff95c6f84500c0 R15: ffff95c69aa13c00
[ 153.567390] FS: 00007fdc3a283700(0000) GS:ffff95c6ff9c0000(0000) knlGS:0000000000000000
[ 153.567390] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 153.567391] CR2: 00007ffee758e890 CR3: 0000001f9ba20003 CR4: 00000000001606e0
[ 153.567391] Call Trace:
[ 153.567391] ip6_finish_output2+0x34e/0x550
[ 153.567391] __ip6_finish_output+0xe7/0x110
[ 153.567391] ip6_finish_output+0x2d/0xb0
[ 153.567392] ip6_output+0x77/0x120
[ 153.567392] ? __ip6_finish_output+0x110/0x110
[ 153.567392] ip6_local_out+0x3d/0x50
[ 153.567392] ipvlan_queue_xmit+0x56c/0x5e0
[ 153.567393] ? ksize+0x19/0x30
[ 153.567393] ipvlan_start_xmit+0x18/0x50
[ 153.567393] dev_direct_xmit+0xf3/0x1c0
[ 153.567393] packet_direct_xmit+0x69/0xa0
[ 153.567394] packet_sendmsg+0xbf0/0x19b0
[ 153.567394] ? plist_del+0x62/0xb0
[ 153.567394] sock_sendmsg+0x65/0x70
[ 153.567394] sock_write_iter+0x93/0xf0
[ 153.567394] new_sync_write+0x18e/0x1a0
[ 153.567395] __vfs_write+0x29/0x40
[ 153.567395] vfs_write+0xb9/0x1b0
[ 153.567395] ksys_write+0xb1/0xe0
[ 153.567395] __x64_sys_write+0x1a/0x20
[ 153.567395] do_syscall_64+0x43/0x70
[ 153.567396] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 153.567396] RIP: 0033:0x453549
[ 153.567396] Code: Bad RIP value.
[ 153.567396] RSP: 002b:00007fdc3a282cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 153.567397] RAX: ffffffffffffffda RBX: 00000000004d32d0 RCX: 0000000000453549
[ 153.567397] RDX: 0000000000000020 RSI: 0000000020000300 RDI: 0000000000000003
[ 153.567398] RBP: 00000000004d32d8 R08: 0000000000000000 R09: 0000000000000000
[ 153.567398] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d32dc
[ 153.567398] R13: 00007ffee742260f R14: 00007fdc3a282dc0 R15: 00007fdc3a283700
[ 153.567399] ---[ end trace c1d5ae2b1059ec62 ]---
f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 814152a89ed52c722ab92e9fbabcac3cb8a39245 ]
I got a memleak report when doing some fuzz test:
unreferenced object 0xffff888112584000 (size 13599):
comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
hex dump (first 32 bytes):
74 61 70 30 00 00 00 00 00 00 00 00 00 00 00 00 tap0............
00 ee d9 19 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000002f60ba65>] __kmalloc_node+0x309/0x3a0
[<0000000075b211ec>] kvmalloc_node+0x7f/0xc0
[<00000000d3a97396>] alloc_netdev_mqs+0x76/0xfc0
[<00000000609c3655>] __tun_chr_ioctl+0x1456/0x3d70
[<000000001127ca24>] ksys_ioctl+0xe5/0x130
[<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
[<00000000e1023498>] do_syscall_64+0x56/0xa0
[<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff888111845cc0 (size 8):
comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
hex dump (first 8 bytes):
74 61 70 30 00 88 ff ff tap0....
backtrace:
[<000000004c159777>] kstrdup+0x35/0x70
[<00000000d8b496ad>] kstrdup_const+0x3d/0x50
[<00000000494e884a>] kvasprintf_const+0xf1/0x180
[<0000000097880a2b>] kobject_set_name_vargs+0x56/0x140
[<000000008fbdfc7b>] dev_set_name+0xab/0xe0
[<000000005b99e3b4>] netdev_register_kobject+0xc0/0x390
[<00000000602704fe>] register_netdevice+0xb61/0x1250
[<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70
[<000000001127ca24>] ksys_ioctl+0xe5/0x130
[<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
[<00000000e1023498>] do_syscall_64+0x56/0xa0
[<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff88811886d800 (size 512):
comm "ip", pid 3048, jiffies 4294911734 (age 343.491s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff c0 66 3d a3 ff ff ff ff .........f=.....
backtrace:
[<0000000050315800>] device_add+0x61e/0x1950
[<0000000021008dfb>] netdev_register_kobject+0x17e/0x390
[<00000000602704fe>] register_netdevice+0xb61/0x1250
[<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70
[<000000001127ca24>] ksys_ioctl+0xe5/0x130
[<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0
[<00000000e1023498>] do_syscall_64+0x56/0xa0
[<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
If call_netdevice_notifiers() failed, then rollback_registered()
calls netdev_unregister_kobject() which holds the kobject. The
reference cannot be put because the netdev won't be add to todo
list, so it will leads a memleak, we need put the reference to
avoid memleak.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 41b14fb8724d5a4b382a63cb4a1a61880347ccb8 ]
Clearing the sock TX queue in sk_set_socket() might cause unexpected
out-of-order transmit when called from sock_orphan(), as outstanding
packets can pick a different TX queue and bypass the ones already queued.
This is undesired in general. More specifically, it breaks the in-order
scheduling property guarantee for device-offloaded TLS sockets.
Remove the call to sk_tx_queue_clear() in sk_set_socket(), and add it
explicitly only where needed.
Fixes: e022f0b4a03f ("net: Introduce sk_tx_queue_mapping")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 11d6011c2cf29f7c8181ebde6c8bc0c4d83adcd7 ]
Sequence counters write paths are critical sections that must never be
preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed.
Commit 5dbe7c178d3f ("net: fix kernel deadlock with interface rename and
netdev name retrieval.") handled a deadlock, observed with
CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was
infinitely spinning: it got scheduled after the seqcount write side
blocked inside its own critical section.
To fix that deadlock, among other issues, the commit added a
cond_resched() inside the read side section. While this will get the
non-preemptible kernel eventually unstuck, the seqcount reader is fully
exhausting its slice just spinning -- until TIF_NEED_RESCHED is set.
The fix is also still broken: if the seqcount reader belongs to a
real-time scheduling policy, it can spin forever and the kernel will
livelock.
Disabling preemption over the seqcount write side critical section will
not work: inside it are a number of GFP_KERNEL allocations and mutex
locking through the drivers/base/ :: device_rename() call chain.
>From all the above, replace the seqcount with a rwsem.
Fixes: 5dbe7c178d3f (net: fix kernel deadlock with interface rename and netdev name retrieval.)
Fixes: 30e6c9fa93cf (net: devnet_rename_seq should be a seqcount)
Fixes: c91f6df2db49 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name)
Cc: <stable@vger.kernel.org>
Reported-by: kbuild test robot <lkp@intel.com> [ v1 missing up_read() on error exit ]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [ v1 missing up_read() on error exit ]
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2da2b32fd9346009e9acdb68c570ca8d3966aba7 ]
CONFIG_PREEMPTION is selected by CONFIG_PREEMPT and by CONFIG_PREEMPT_RT.
Both PREEMPT and PREEMPT_RT require the same functionality which today
depends on CONFIG_PREEMPT.
Update the comment to use CONFIG_PREEMPTION.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20191015191821.11479-22-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 60e5ca8a64bad8f3e2e20a1e57846e497361c700 ]
Add missed bpf_map_charge_init() in sock_hash_alloc() and
correspondingly bpf_map_charge_finish() on ENOMEM.
It was found accidentally while working on unrelated selftest that
checks "map->memory.pages > 0" is true for all map types.
Before:
# bpftool m l
...
3692: sockhash name m_sockhash flags 0x0
key 4B value 4B max_entries 8 memlock 0B
After:
# bpftool m l
...
84: sockmap name m_sockmap flags 0x0
key 4B value 4B max_entries 8 memlock 4096B
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200612000857.2881453-1-rdna@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f5d82f187e1beda3fe7295dfc500af266a5bd80 ]
Added a check in the switch case on start_header that checks for
the existence of the header, and in the case that MAC is not set
and the caller requests for MAC, -EFAULT. If the caller requests
for NET then MAC's existence is completely ignored.
There is no function to check NET header's existence and as far
as cgroup_skb/egress is concerned it should always be set.
Removed for ptr >= the start of header, considering offset is
bounded unsigned and should always be true. len <= end - mac is
redundant to ptr + len <= end.
Fixes: 3eee1f75f2b9 ("bpf: fix bpf_skb_load_bytes_relative pkt length check")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/76bb820ddb6a95f59a772ecbd8c8a336f646b362.1591812755.git.zhuyifei@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 75e68e5bf2c7fa9d3e874099139df03d5952a3e1 ]
We can end up modifying the sockhash bucket list from two CPUs when a
sockhash is being destroyed (sock_hash_free) on one CPU, while a socket
that is in the sockhash is unlinking itself from it on another CPU
it (sock_hash_delete_from_link).
This results in accessing a list element that is in an undefined state as
reported by KASAN:
| ==================================================================
| BUG: KASAN: wild-memory-access in sock_hash_free+0x13c/0x280
| Write of size 8 at addr dead000000000122 by task kworker/2:1/95
|
| CPU: 2 PID: 95 Comm: kworker/2:1 Not tainted 5.7.0-rc7-02961-ge22c35ab0038-dirty #691
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
| dump_stack+0x97/0xe0
| ? sock_hash_free+0x13c/0x280
| __kasan_report.cold+0x5/0x40
| ? mark_lock+0xbc1/0xc00
| ? sock_hash_free+0x13c/0x280
| kasan_report+0x38/0x50
| ? sock_hash_free+0x152/0x280
| sock_hash_free+0x13c/0x280
| bpf_map_free_deferred+0xb2/0xd0
| ? bpf_map_charge_finish+0x50/0x50
| ? rcu_read_lock_sched_held+0x81/0xb0
| ? rcu_read_lock_bh_held+0x90/0x90
| process_one_work+0x59a/0xac0
| ? lock_release+0x3b0/0x3b0
| ? pwq_dec_nr_in_flight+0x110/0x110
| ? rwlock_bug.part.0+0x60/0x60
| worker_thread+0x7a/0x680
| ? _raw_spin_unlock_irqrestore+0x4c/0x60
| kthread+0x1cc/0x220
| ? process_one_work+0xac0/0xac0
| ? kthread_create_on_node+0xa0/0xa0
| ret_from_fork+0x24/0x30
| ==================================================================
Fix it by reintroducing spin-lock protected critical section around the
code that removes the elements from the bucket on sockhash free.
To do that we also need to defer processing of removed elements, until out
of atomic context so that we can unlink the socket from the map when
holding the sock lock.
Fixes: 90db6d772f74 ("bpf, sockmap: Remove bucket->lock from sock_{hash|map}_free")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200607205229.2389672-3-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 33a7c831565c43a7ee2f38c7df4c4a40e1dfdfed ]
When sockhash gets destroyed while sockets are still linked to it, we will
walk the bucket lists and delete the links. However, we are not freeing the
list elements after processing them, leaking the memory.
The leak can be triggered by close()'ing a sockhash map when it still
contains sockets, and observed with kmemleak:
unreferenced object 0xffff888116e86f00 (size 64):
comm "race_sock_unlin", pid 223, jiffies 4294731063 (age 217.404s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
81 de e8 41 00 00 00 00 c0 69 2f 15 81 88 ff ff ...A.....i/.....
backtrace:
[<00000000dd089ebb>] sock_hash_update_common+0x4ca/0x760
[<00000000b8219bd5>] sock_hash_update_elem+0x1d2/0x200
[<000000005e2c23de>] __do_sys_bpf+0x2046/0x2990
[<00000000d0084618>] do_syscall_64+0xad/0x9a0
[<000000000d96f263>] entry_SYSCALL_64_after_hwframe+0x49/0xb3
Fix it by freeing the list element when we're done with it.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200607205229.2389672-2-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e91de6afa81c10e9f855c5695eb9a53168d96b73 ]
KTLS uses a stream parser to collect TLS messages and send them to
the upper layer tls receive handler. This ensures the tls receiver
has a full TLS header to parse when it is run. However, when a
socket has BPF_SK_SKB_STREAM_VERDICT program attached before KTLS
is enabled we end up with two stream parsers running on the same
socket.
The result is both try to run on the same socket. First the KTLS
stream parser runs and calls read_sock() which will tcp_read_sock
which in turn calls tcp_rcv_skb(). This dequeues the skb from the
sk_receive_queue. When this is done KTLS code then data_ready()
callback which because we stacked KTLS on top of the bpf stream
verdict program has been replaced with sk_psock_start_strp(). This
will in turn kick the stream parser again and eventually do the
same thing KTLS did above calling into tcp_rcv_skb() and dequeuing
a skb from the sk_receive_queue.
At this point the data stream is broke. Part of the stream was
handled by the KTLS side some other bytes may have been handled
by the BPF side. Generally this results in either missing data
or more likely a "Bad Message" complaint from the kTLS receive
handler as the BPF program steals some bytes meant to be in a
TLS header and/or the TLS header length is no longer correct.
We've already broke the idealized model where we can stack ULPs
in any order with generic callbacks on the TX side to handle this.
So in this patch we do the same thing but for RX side. We add
a sk_psock_strp_enabled() helper so TLS can learn a BPF verdict
program is running and add a tls_sw_has_ctx_rx() helper so BPF
side can learn there is a TLS ULP on the socket.
Then on BPF side we omit calling our stream parser to avoid
breaking the data stream for the KTLS receiver. Then on the
KTLS side we call BPF_SK_SKB_STREAM_VERDICT once the KTLS
receiver is done with the packet but before it posts the
msg to userspace. This gives us symmetry between the TX and
RX halfs and IMO makes it usable again. On the TX side we
process packets in this order BPF -> TLS -> TCP and on
the receive side in the reverse order TCP -> TLS -> BPF.
Discovered while testing OpenSSL 3.0 Alpha2.0 release.
Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/159079361946.5745.605854335665044485.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ca2f5f21dbbd5e3a00cd3e97f728aa2ca0b2e011 ]
We will need this block of code called from tls context shortly
lets refactor the redirect logic so its easy to use. This also
cleans up the switch stmt so we have fewer fallthrough cases.
No logic changes are intended.
Fixes: d829e9c4112b5 ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/159079360110.5745.7024009076049029819.stgit@john-Precision-5820-Tower
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c0bbbdc32febd4f034ecbf3ea17865785b2c0652 ]
__netif_receive_skb_core may change the skb pointer passed into it (e.g.
in rx_handler). The original skb may be freed as a result of this
operation.
The callers of __netif_receive_skb_core may further process original skb
by using pt_prev pointer returned by __netif_receive_skb_core thus
leading to unpleasant effects.
The solution is to pass skb by reference into __netif_receive_skb_core.
v2: Added Fixes tag and comment regarding ppt_prev and skb invariant.
Fixes: 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup")
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5cf65922bb15279402e1e19b5ee8c51d618fa51f upstream.
When attaching a flow dissector program to a network namespace with
bpf(BPF_PROG_ATTACH, ...) we grab a reference to bpf_prog.
If netns gets destroyed while a flow dissector is still attached, and there
are no other references to the prog, we leak the reference and the program
remains loaded.
Leak can be reproduced by running flow dissector tests from selftests/bpf:
# bpftool prog list
# ./test_flow_dissector.sh
...
selftests: test_flow_dissector [PASS]
# bpftool prog list
4: flow_dissector name _dissect tag e314084d332a5338 gpl
loaded_at 2020-05-20T18:50:53+0200 uid 0
xlated 552B jited 355B memlock 4096B map_ids 3,4
btf_id 4
#
Fix it by detaching the flow dissector program when netns is going away.
Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20200521083435.560256-1-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3e104c23816220919ea1b3fd93fabe363c67c484 ]
When sk_msg_pop() is called where the pop operation is working on
the end of a sge element and there is no additional trailing data
and there _is_ data in front of pop, like the following case,
|____________a_____________|__pop__|
We have out of order operations where we incorrectly set the pop
variable so that instead of zero'ing pop we incorrectly leave it
untouched, effectively. This can cause later logic to shift the
buffers around believing it should pop extra space. The result is
we have 'popped' more data then we expected potentially breaking
program logic.
It took us a while to hit this case because typically we pop headers
which seem to rarely be at the end of a scatterlist elements but
we can't rely on this.
Fixes: 7246d8ed4dcce ("bpf: helper to pop data from messages")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/158861288359.14306.7654891716919968144.stgit@john-Precision-5820-Tower
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 090e28b229af92dc5b40786ca673999d59e73056 ]
If systemd is configured to use hybrid mode which enables the use of
both cgroup v1 and v2, systemd will create new cgroup on both the default
root (v2) and netprio_cgroup hierarchy (v1) for a new session and attach
task to the two cgroups. If the task does some network thing then the v2
cgroup can never be freed after the session exited.
One of our machines ran into OOM due to this memory leak.
In the scenario described above when sk_alloc() is called
cgroup_sk_alloc() thought it's in v2 mode, so it stores
the cgroup pointer in sk->sk_cgrp_data and increments
the cgroup refcnt, but then sock_update_netprioidx()
thought it's in v1 mode, so it stores netprioidx value
in sk->sk_cgrp_data, so the cgroup refcnt will never be freed.
Currently we do the mode switch when someone writes to the ifpriomap
cgroup control file. The easiest fix is to also do the switch when
a task is attached to a new cgroup.
Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup")
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dd912306ff008891c82cd9f63e8181e47a9cb2fb ]
syzbot managed to trigger a recursive NETDEV_FEAT_CHANGE event
between bonding master and slave. I managed to find a reproducer
for this:
ip li set bond0 up
ifenslave bond0 eth0
brctl addbr br0
ethtool -K eth0 lro off
brctl addif br0 bond0
ip li set br0 up
When a NETDEV_FEAT_CHANGE event is triggered on a bonding slave,
it captures this and calls bond_compute_features() to fixup its
master's and other slaves' features. However, when syncing with
its lower devices by netdev_sync_lower_features() this event is
triggered again on slaves when the LRO feature fails to change,
so it goes back and forth recursively until the kernel stack is
exhausted.
Commit 17b85d29e82c intentionally lets __netdev_update_features()
return -1 for such a failure case, so we have to just rely on
the existing check inside netdev_sync_lower_features() and skip
NETDEV_FEAT_CHANGE event only for this specific failure case.
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Reported-by: syzbot+e73ceacfd8560cc8a3ca@syzkaller.appspotmail.com
Reported-by: syzbot+c2fb6f9ddcea95ba49b5@syzkaller.appspotmail.com
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jann Horn <jannh@google.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dc30b4059f6e2abf3712ab537c8718562b21c45d ]
The current gcc-10 snapshot produces a false-positive warning:
net/core/drop_monitor.c: In function 'trace_drop_common.constprop':
cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=]
In file included from net/core/drop_monitor.c:23:
include/uapi/linux/net_dropmon.h:36:8: note: at offset 0 to object 'entries' with size 4 declared here
36 | __u32 entries;
| ^~~~~~~
I reported this in the gcc bugzilla, but in case it does not get
fixed in the release, work around it by using a temporary variable.
Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 38212bb31fe923d0a2c6299bd2adfbb84cddef2a ]
When a new neighbor entry has been added, event is generated but it does not
include protocol, because its value is assigned after the event notification
routine has run, so move protocol assignment code earlier.
Fixes: df9b0e30d44c ("neighbor: Add protocol attribute")
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 610a9346c138b9c2c93d38bf5f3728e74ae9cbd5 ]
Commit d5b90e99e1d5 ("devlink: report 0 after hitting end in region read")
fixed region dump, but region read still returns a spurious error:
$ devlink region read netdevsim/netdevsim1/dummy snapshot 0 addr 0 len 128
0000000000000000 a6 f4 c4 1c 21 35 95 a6 9d 34 c3 5b 87 5b 35 79
0000000000000010 f3 a0 d7 ee 4f 2f 82 7f c6 dd c4 f6 a5 c3 1b ae
0000000000000020 a4 fd c8 62 07 59 48 03 70 3b c7 09 86 88 7f 68
0000000000000030 6f 45 5d 6d 7d 0e 16 38 a9 d0 7a 4b 1e 1e 2e a6
0000000000000040 e6 1d ae 06 d6 18 00 85 ca 62 e8 7e 11 7e f6 0f
0000000000000050 79 7e f7 0f f3 94 68 bd e6 40 22 85 b6 be 6f b1
0000000000000060 af db ef 5e 34 f0 98 4b 62 9a e3 1b 8b 93 fc 17
devlink answers: Invalid argument
0000000000000070 61 e8 11 11 66 10 a5 f7 b1 ea 8d 40 60 53 ed 12
This is a minimal fix, I'll follow up with a restructuring
so we don't have two checks for the same condition.
Fixes: fdd41ec21e15 ("devlink: Return right error code in case of errors for region read")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 526f3d96b8f83b1b13d73bd0b5c79cc2c487ec8e upstream.
Commit 018d26fcd12a ("cgroup, netclassid: periodically release file_lock
on classid") added a second cond_resched to write_classid indirectly by
update_classid_task. Remove the one in write_classid.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Dmitry Yakunin <zeil@yandex-team.ru>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 29f3490ba9d2399d3d1b20c4aa74592d92bd4e11 upstream.
TCP recvmsg() calls skb_copy_datagram_iter(), which
calls an indirect function (cb pointing to simple_copy_to_iter())
for every MSS (fragment) present in the skb.
CONFIG_RETPOLINE=y forces a very expensive operation
that we can avoid thanks to indirect call wrappers.
This patch gives a 13% increase of performance on
a single flow, if the bottleneck is the thread reading
the TCP socket.
Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a4837980fd9fa4c70a821d11831698901baef56b ]
For HZ < 1000 timeout 2000us rounds up to 1 jiffy but expires randomly
because next timer interrupt could come shortly after starting softirq.
For commonly used CONFIG_HZ=1000 nothing changes.
Fixes: 7acf8a1e8a28 ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning")
Reported-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6e11d1578fba8d09d03a286740ffcf336d53928c upstream.
Fixes the lower and upper bounds when there are multiple TCs and
traffic is on the the same TC on the same device.
The lower bound is represented by 'qoffset' and the upper limit for
hash value is 'qcount + qoffset'. This gives a clean Rx to Tx queue
mapping when there are multiple TCs, as the queue indices for upper TCs
will be offset by 'qoffset'.
v2: Fixed commit description based on comments.
Fixes: 1b837d489e06 ("net: Revoke export for __skb_tx_hash, update it to just be static skb_tx_hash")
Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx")
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c64605b590edadb3fb46d1ec6badb49e940b479 upstream.
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’:
net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’
pkt->skb->tc_redirected = 1;
^~
net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’
pkt->skb->tc_from_ingress = 1;
^~
To avoid a direct dependency with tc actions from netfilter, wrap the
redirect bits around CONFIG_NET_REDIRECT and move helpers to
include/linux/skbuff.h. Turn on this toggle from the ifb driver, the
only existing client of these bits in the tree.
This patch adds skb_set_redirected() that sets on the redirected bit
on the skbuff, it specifies if the packet was redirect from ingress
and resets the timestamp (timestamp reset was originally missing in the
netfilter bugfix).
Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress")
Reported-by: noreply@ellerman.id.au
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90db6d772f749e38171d04619a5e3cd8804a6d02 upstream.
The bucket->lock is not needed in the sock_hash_free and sock_map_free
calls, in fact it is causing a splat due to being inside rcu block.
| BUG: sleeping function called from invalid context at net/core/sock.c:2935
| in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 62, name: kworker/0:1
| 3 locks held by kworker/0:1/62:
| #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0
| #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0
| #2: ffff8881381f6df8 (&stab->lock){+...}, at: sock_map_free+0x26/0x180
| CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04008-g7b083332376e #454
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
| dump_stack+0x71/0xa0
| ___might_sleep.cold+0xa6/0xb6
| lock_sock_nested+0x28/0x90
| sock_map_free+0x5f/0x180
| bpf_map_free_deferred+0x58/0x80
| process_one_work+0x260/0x5e0
| worker_thread+0x4d/0x3e0
| kthread+0x108/0x140
| ? process_one_work+0x5e0/0x5e0
| ? kthread_park+0x90/0x90
| ret_from_fork+0x3a/0x50
The reason we have stab->lock and bucket->locks in sockmap code is to
handle checking EEXIST in update/delete cases. We need to be careful during
an update operation that we check for EEXIST and we need to ensure that the
psock object is not in some partial state of removal/insertion while we do
this. So both map_update_common and sock_map_delete need to guard from being
run together potentially deleting an entry we are checking, etc. But by the
time we get to the tear-down code in sock_{ma[|hash}_free we have already
disconnected the map and we just did synchronize_rcu() in the line above so
no updates/deletes should be in flight. Because of this we can drop the
bucket locks from the map free'ing code, noting no update/deletes can be
in-flight.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/158385850787.30597.8346421465837046618.stgit@john-Precision-5820-Tower
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ff3b63b8c299b73ac599b120653b47e275407656 ]
DEVLINK_ATTR_REGION_CHUNK_ADDR and DEVLINK_ATTR_REGION_CHUNK_LEN
lack entries in the netlink policy. Corresponding nla_get_u64()s
may read beyond the end of the message.
Fixes: 4e54795a27f5 ("devlink: Add support for region snapshot read command")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8750939b6ad86abc3f53ec8a9683a1cded4a5654 ]
DEVLINK_ATTR_PARAM_VALUE_DATA may have different types
so it's not checked by the normal netlink policy. Make
sure the attribute length is what we expect.
Fixes: e3b7ca18ad7b ("devlink: Add param set command")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d752a4986532cb6305dfd5290a614cde8072769d ]
If a TCP socket is allocated in IRQ context or cloned from unassociated
(i.e. not associated to a memcg) in IRQ context then it will remain
unassociated for its whole life. Almost half of the TCPs created on the
system are created in IRQ context, so, memory used by such sockets will
not be accounted by the memcg.
This issue is more widespread in cgroup v1 where network memory
accounting is opt-in but it can happen in cgroup v2 if the source socket
for the cloning was created in root memcg.
To fix the issue, just do the association of the sockets at the accept()
time in the process context and then force charge the memory buffer
already used and reserved by the socket.
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 018d26fcd12a75fb9b5fe233762aa3f2f0854b88 ]
In our production environment we have faced with problem that updating
classid in cgroup with heavy tasks cause long freeze of the file tables
in this tasks. By heavy tasks we understand tasks with many threads and
opened sockets (e.g. balancers). This freeze leads to an increase number
of client timeouts.
This patch implements following logic to fix this issue:
аfter iterating 1000 file descriptors file table lock will be released
thus providing a time gap for socket creation/deletion.
Now update is non atomic and socket may be skipped using calls:
dup2(oldfd, newfd);
close(oldfd);
But this case is not typical. Moreover before this patch skip is possible
too by hiding socket fd in unix socket buffer.
New sockets will be allocated with updated classid because cgroup state
is updated before start of the file descriptors iteration.
So in common cases this patch has no side effects.
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7151affeef8d527f50b4b68a871fd28bd660023f ]
netdev_next_lower_dev_rcu() will be used to implement a function,
which is to walk all lower interfaces.
There are already functions that they walk their lower interface.
(netdev_walk_all_lower_dev_rcu, netdev_walk_all_lower_dev()).
But, there would be cases that couldn't be covered by given
netdev_walk_all_lower_dev_{rcu}() function.
So, some modules would want to implement own function,
which is to walk all lower interfaces.
In the next patch, netdev_next_lower_dev_rcu() will be used.
In addition, this patch removes two unused prototypes in netdevice.h.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 379349e9bc3b42b8b2f8f7a03f64a97623fff323 ]
This reverts commit ba27b4cdaaa66561aaedb2101876e563738d36fe
Ahmed reported ouf-of-order issues bisected to commit ba27b4cdaaa6
("net: dev: introduce support for sch BYPASS for lockless qdisc").
I can't find any working solution other than a plain revert.
This will introduce some minor performance regressions for
pfifo_fast qdisc. I plan to address them in net-next with more
indirect call wrapper boilerplate for qdiscs.
Reported-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Fixes: ba27b4cdaaa6 ("net: dev: introduce support for sch BYPASS for lockless qdisc")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 540e585a79e9d643ede077b73bcc7aa2d7b4d919 ]
In 709772e6e06564ed94ba740de70185ac3d792773, RT_TABLE_COMPAT was added to
allow legacy software to deal with routing table numbers >= 256, but the
same change to FIB rule queries was overlooked.
Signed-off-by: Jethro Beekman <jethro@fortanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0a29275b6300f39f78a87f2038bbfe5bdbaeca47 ]
A negative value should be returned if map->map_type is invalid
although that is impossible now, but if we run into such situation
in future, then xdpbuff could be leaked.
Daniel Borkmann suggested:
-EBADRQC should be returned to stay consistent with generic XDP
for the tracepoint output and not to be confused with -EOPNOTSUPP
from other locations like dev_map_enqueue() when ndo_xdp_xmit is
missing and such.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/1578618277-18085-1-git-send-email-lirongqing@baidu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0b2dc83906cf1e694e48003eae5df8fa63f76fd9 ]
We need to have a synchronize_rcu before free'ing the sockhash because any
outstanding psock references will have a pointer to the map and when they
use it, this could trigger a use after free.
This is a sister fix for sockhash, following commit 2bb90e5cc90e ("bpf:
sockmap, synchronize_rcu before free'ing map") which addressed sockmap,
which comes from a manual audit.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200206111652.694507-3-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ad1e03b2b3d4430baaa109b77bc308dc73050de3 ]
The current generic XDP handler skips execution of XDP programs entirely if
an SKB is marked as cloned. This leads to some surprising behaviour, as
packets can end up being cloned in various ways, which will make an XDP
program not see all the traffic on an interface.
This was discovered by a simple test case where an XDP program that always
returns XDP_DROP is installed on a veth device. When combining this with
the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending
side, SKBs reliably end up in the cloned state, causing them to be passed
through to the receiving interface instead of being dropped. A minimal
reproducer script for this is included below.
This patch fixed the issue by simply triggering the existing linearisation
code for cloned SKBs instead of skipping the XDP program execution. This
behaviour is in line with the behaviour of the native XDP implementation
for the veth driver, which will reallocate and copy the SKB data if the SKB
is marked as shared.
Reproducer Python script (requires BCC and Scapy):
from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP
from bcc import BPF
import time, sys, subprocess, shlex
SKB_MODE = (1 << 1)
DRV_MODE = (1 << 2)
PYTHON=sys.executable
def client():
time.sleep(2)
# Sniffing on the sender causes skb_cloned() to be set
s = AsyncSniffer()
s.start()
for p in range(10):
sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"),
verbose=False)
time.sleep(0.1)
s.stop()
return 0
def server(mode):
prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}")
func = prog.load_func("dummy_drop", BPF.XDP)
prog.attach_xdp("a_to_b", func, mode)
time.sleep(1)
s = sniff(iface="a_to_b", count=10, timeout=15)
if len(s):
print(f"Got {len(s)} packets - should have gotten 0")
return 1
else:
print("Got no packets - as expected")
return 0
if len(sys.argv) < 2:
print(f"Usage: {sys.argv[0]} <skb|drv>")
sys.exit(1)
if sys.argv[1] == "client":
sys.exit(client())
elif sys.argv[1] == "server":
mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE
sys.exit(server(mode))
else:
try:
mode = sys.argv[1]
if mode not in ('skb', 'drv'):
print(f"Usage: {sys.argv[0]} <skb|drv>")
sys.exit(1)
print(f"Running in {mode} mode")
for cmd in [
'ip netns add netns_a',
'ip netns add netns_b',
'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b',
# Disable ipv6 to make sure there's no address autoconf traffic
'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1',
'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1',
'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa',
'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc',
'ip -n netns_a link set dev a_to_b up',
'ip -n netns_b link set dev b_to_a up']:
subprocess.check_call(shlex.split(cmd))
server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}"))
client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client"))
client.wait()
server.wait()
sys.exit(server.returncode)
finally:
subprocess.run(shlex.split("ip netns delete netns_a"))
subprocess.run(shlex.split("ip netns delete netns_b"))
Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices")
Reported-by: Stepan Horacek <shoracek@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85b8ac01a421791d66c3a458a7f83cfd173fe3fa upstream.
It's currently possible to insert sockets in unexpected states into
a sockmap, due to a TOCTTOU when updating the map from a syscall.
sock_map_update_elem checks that sk->sk_state == TCP_ESTABLISHED,
locks the socket and then calls sock_map_update_common. At this
point, the socket may have transitioned into another state, and
the earlier assumptions don't hold anymore. Crucially, it's
conceivable (though very unlikely) that a socket has become unhashed.
This breaks the sockmap's assumption that it will get a callback
via sk->sk_prot->unhash.
Fix this by checking the (fixed) sk_type and sk_protocol without the
lock, followed by a locked check of sk_state.
Unfortunately it's not possible to push the check down into
sock_(map|hash)_update_common, since BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB
run before the socket has transitioned from TCP_SYN_RECV into
TCP_ESTABLISHED.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200207103713.28175-1-lmb@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 88d6f130e5632bbf419a2e184ec7adcbe241260b upstream.
It was reported that the max_t, ilog2, and roundup_pow_of_two macros have
exponential effects on the number of states in the sparse checker.
This patch breaks them up by calculating the "nbuckets" first so that the
"bucket_log" only needs to take ilog2().
In addition, Linus mentioned:
Patch looks good, but I'd like to point out that it's not just sparse.
You can see it with a simple
make net/core/bpf_sk_storage.i
grep 'smap->bucket_log = ' net/core/bpf_sk_storage.i | wc
and see the end result:
1 365071 2686974
That's one line (the assignment line) that is 2,686,974 characters in
length.
Now, sparse does happen to react particularly badly to that (I didn't
look to why, but I suspect it's just that evaluating all the types
that don't actually ever end up getting used ends up being much more
expensive than it should be), but I bet it's not good for gcc either.
Fixes: 6ac99e8f23d4 ("bpf: Introduce bpf sk local storage")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Link: https://lore.kernel.org/bpf/20200207081810.3918919-1-kafai@fb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b2dc83906cf1e694e48003eae5df8fa63f76fd9 upstream.
We need to have a synchronize_rcu before free'ing the sockhash because any
outstanding psock references will have a pointer to the map and when they
use it, this could trigger a use after free.
This is a sister fix for sockhash, following commit 2bb90e5cc90e ("bpf:
sockmap, synchronize_rcu before free'ing map") which addressed sockmap,
which comes from a manual audit.
Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200206111652.694507-3-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit db6a5018b6e008c1d69c6628cdaa9541b8e70940 upstream.
rcu_read_lock is needed to protect access to psock inside sock_map_unref
when tearing down the map. However, we can't afford to sleep in lock_sock
while in RCU read-side critical section. Grab the RCU lock only after we
have locked the socket.
This fixes RCU warnings triggerable on a VM with 1 vCPU when free'ing a
sockmap/sockhash that contains at least one socket:
| =============================
| WARNING: suspicious RCU usage
| 5.5.0-04005-g8fc91b972b73 #450 Not tainted
| -----------------------------
| include/linux/rcupdate.h:272 Illegal context switch in RCU read-side critical section!
|
| other info that might help us debug this:
|
|
| rcu_scheduler_active = 2, debug_locks = 1
| 4 locks held by kworker/0:1/62:
| #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0
| #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0
| #2: ffffffff82065d20 (rcu_read_lock){....}, at: sock_map_free+0x5/0x170
| #3: ffff8881368c5df8 (&stab->lock){+...}, at: sock_map_free+0x64/0x170
|
| stack backtrace:
| CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04005-g8fc91b972b73 #450
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
| dump_stack+0x71/0xa0
| ___might_sleep+0x105/0x190
| lock_sock_nested+0x28/0x90
| sock_map_free+0x95/0x170
| bpf_map_free_deferred+0x58/0x80
| process_one_work+0x260/0x5e0
| worker_thread+0x4d/0x3e0
| kthread+0x108/0x140
| ? process_one_work+0x5e0/0x5e0
| ? kthread_park+0x90/0x90
| ret_from_fork+0x3a/0x50
| =============================
| WARNING: suspicious RCU usage
| 5.5.0-04005-g8fc91b972b73-dirty #452 Not tainted
| -----------------------------
| include/linux/rcupdate.h:272 Illegal context switch in RCU read-side critical section!
|
| other info that might help us debug this:
|
|
| rcu_scheduler_active = 2, debug_locks = 1
| 4 locks held by kworker/0:1/62:
| #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0
| #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0
| #2: ffffffff82065d20 (rcu_read_lock){....}, at: sock_hash_free+0x5/0x1d0
| #3: ffff888139966e00 (&htab->buckets[i].lock){+...}, at: sock_hash_free+0x92/0x1d0
|
| stack backtrace:
| CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04005-g8fc91b972b73-dirty #452
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
| Workqueue: events bpf_map_free_deferred
| Call Trace:
| dump_stack+0x71/0xa0
| ___might_sleep+0x105/0x190
| lock_sock_nested+0x28/0x90
| sock_hash_free+0xec/0x1d0
| bpf_map_free_deferred+0x58/0x80
| process_one_work+0x260/0x5e0
| worker_thread+0x4d/0x3e0
| kthread+0x108/0x140
| ? process_one_work+0x5e0/0x5e0
| ? kthread_park+0x90/0x90
| ret_from_fork+0x3a/0x50
Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200206111652.694507-2-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dfa7f709596be5ca46c070d4f8acbb344322056a ]
Drop monitor uses a work item that takes care of constructing and
sending netlink notifications to user space. In case drop monitor never
started to monitor, then the work item is uninitialized and not
associated with a function.
Therefore, a stop command from user space results in canceling an
uninitialized work item which leads to the following warning [1].
Fix this by not processing a stop command if drop monitor is not
currently monitoring.
[1]
[ 31.735402] ------------[ cut here ]------------
[ 31.736470] WARNING: CPU: 0 PID: 143 at kernel/workqueue.c:3032 __flush_work+0x89f/0x9f0
...
[ 31.738120] CPU: 0 PID: 143 Comm: dwdump Not tainted 5.5.0-custom-09491-g16d4077796b8 #727
[ 31.741968] RIP: 0010:__flush_work+0x89f/0x9f0
...
[ 31.760526] Call Trace:
[ 31.771689] __cancel_work_timer+0x2a6/0x3b0
[ 31.776809] net_dm_cmd_trace+0x300/0xef0
[ 31.777549] genl_rcv_msg+0x5c6/0xd50
[ 31.781005] netlink_rcv_skb+0x13b/0x3a0
[ 31.784114] genl_rcv+0x29/0x40
[ 31.784720] netlink_unicast+0x49f/0x6a0
[ 31.787148] netlink_sendmsg+0x7cf/0xc80
[ 31.790426] ____sys_sendmsg+0x620/0x770
[ 31.793458] ___sys_sendmsg+0xfd/0x170
[ 31.802216] __sys_sendmsg+0xdf/0x1a0
[ 31.806195] do_syscall_64+0xa0/0x540
[ 31.806885] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 8e94c3bc922e ("drop_monitor: Allow user to start monitoring hardware drops")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d5b90e99e1d51b7b5d2b74fbc4c2db236a510913 ]
commit fdd41ec21e15 ("devlink: Return right error code in case of errors
for region read") modified the region read code to report errors
properly in unexpected cases.
In the case where the start_offset and ret_offset match, it unilaterally
converted this into an error. This causes an issue for the "dump"
version of the command. In this case, the devlink region dump will
always report an invalid argument:
000000000000ffd0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
000000000000ffe0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
devlink answers: Invalid argument
000000000000fff0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
This occurs because the expected flow for the dump is to return 0 after
there is no further data.
The simplest fix would be to stop converting the error code to -EINVAL
if start_offset == ret_offset. However, avoid unnecessary work by
checking for when start_offset is larger than the region size and
returning 0 upfront.
Fixes: fdd41ec21e15 ("devlink: Return right error code in case of errors for region read")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 59fb9b62fb6c929a756563152a89f39b07cf8893 ]
This patch applies new flag (FLOW_DISSECTOR_KEY_PORTS_RANGE) and
field (tp_range) to BPF flow dissector to generate appropriate flow
keys when classified by specified port ranges.
Fixes: 8ffb055beae5 ("cls_flower: Fix the behavior using port ranges with hw-offload")
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200117070533.402240-2-komachi.yoshiki@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 189c9b1e94539b11c80636bc13e9cf47529e7bba ]
skb->csum is updated incorrectly, when manipulation for
NF_NAT_MANIP_SRC\DST is done on IPV6 packet.
Fix:
There is no need to update skb->csum in inet_proto_csum_replace16(),
because update in two fields a.) IPv6 src/dst address and b.) L4 header
checksum cancels each other for skb->csum calculation. Whereas
inet_proto_csum_replace4 function needs to update skb->csum, because
update in 3 fields a.) IPv4 src/dst address, b.) IPv4 Header checksum
and c.) L4 header checksum results in same diff as L4 Header checksum
for skb->csum calculation.
[ pablo@netfilter.org: a few comestic documentation edits ]
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Signed-off-by: Andy Stracner <astracner@linkedin.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 58c8db929db1c1d785a6f5d8f8692e5dbcc35e84 upstream.
As John Fastabend reports [0], psock state tear-down can happen on receive
path *after* unlocking the socket, if the only other psock user, that is
sockmap or sockhash, releases its psock reference before tcp_bpf_recvmsg
does so:
tcp_bpf_recvmsg()
psock = sk_psock_get(sk) <- refcnt 2
lock_sock(sk);
...
sock_map_free() <- refcnt 1
release_sock(sk)
sk_psock_put() <- refcnt 0
Remove the lockdep check for socket lock in psock tear-down that got
introduced in 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during
tear down").
[0] https://lore.kernel.org/netdev/5e25dc995d7d_74082aaee6e465b441@john-XPS-13-9370.notmuch/
Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down")
Reported-by: syzbot+d73682fcf7fee6982fe3@syzkaller.appspotmail.com
Suggested-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c80794323e82ac6ab45052ebba5757ce47b4b588 ]
Commit 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL
skbs") introduces batching of GRO_NORMAL packets in napi_frags_finish,
and commit 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in
napi_gro_receive()") adds the same to napi_skb_finish. However,
dev_gro_receive (that is called just before napi_{frags,skb}_finish) can
also pass skbs to the networking stack: e.g., when the GRO session is
flushed, napi_gro_complete is called, which passes pp directly to
netif_receive_skb_internal, skipping napi->rx_list. It means that the
packet stored in pp will be handled by the stack earlier than the
packets that arrived before, but are still waiting in napi->rx_list. It
leads to TCP reorderings that can be observed in the TCPOFOQueue counter
in netstat.
This commit fixes the reordering issue by making napi_gro_complete also
use napi->rx_list, so that all packets going through GRO will keep their
order. In order to keep napi_gro_flush working properly, gro_normal_list
calls are moved after the flush to clear napi->rx_list.
iwlwifi calls napi_gro_flush directly and does the same thing that is
done by gro_normal_list, so the same change is applied there:
napi_gro_flush is moved to be before the flush of napi->rx_list.
A few other drivers also use napi_gro_flush (brocade/bna/bnad.c,
cortina/gemini.c, hisilicon/hns3/hns3_enet.c). The first two also use
napi_complete_done afterwards, which performs the gro_normal_list flush,
so they are fine. The latter calls napi_gro_receive right after
napi_gro_flush, so it can end up with non-empty napi->rx_list anyway.
Fixes: 323ebb61e32b ("net: use listified RX for handling GRO_NORMAL skbs")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Cc: Alexander Lobakin <alobakin@dlink.ru>
Cc: Edward Cree <ecree@solarflare.com>
Acked-by: Alexander Lobakin <alobakin@dlink.ru>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cb626bf566eb4433318d35681286c494f04fedcc ]
Netdev_register_kobject is calling device_initialize. In case of error
reference taken by device_initialize is not given up.
Drivers are supposed to call free_netdev in case of error. In non-error
case the last reference is given up there and device release sequence
is triggered. In error case this reference is kept and the release
sequence is never started.
Fix this by setting reg_state as NETREG_UNREGISTERED if registering
fails.
This is the rootcause for couple of memory leaks reported by Syzkaller:
BUG: memory leak unreferenced object 0xffff8880675ca008 (size 256):
comm "netdev_register", pid 281, jiffies 4294696663 (age 6.808s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000058ca4711>] kmem_cache_alloc_trace+0x167/0x280
[<000000002340019b>] device_add+0x882/0x1750
[<000000001d588c3a>] netdev_register_kobject+0x128/0x380
[<0000000011ef5535>] register_netdevice+0xa1b/0xf00
[<000000007fcf1c99>] __tun_chr_ioctl+0x20d5/0x3dd0
[<000000006a5b7b2b>] tun_chr_ioctl+0x2f/0x40
[<00000000f30f834a>] do_vfs_ioctl+0x1c7/0x1510
[<00000000fba062ea>] ksys_ioctl+0x99/0xb0
[<00000000b1c1b8d2>] __x64_sys_ioctl+0x78/0xb0
[<00000000984cabb9>] do_syscall_64+0x16f/0x580
[<000000000bde033d>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<00000000e6ca2d9f>] 0xffffffffffffffff
BUG: memory leak
unreferenced object 0xffff8880668ba588 (size 8):
comm "kobject_set_nam", pid 286, jiffies 4294725297 (age 9.871s)
hex dump (first 8 bytes):
6e 72 30 00 cc be df 2b nr0....+
backtrace:
[<00000000a322332a>] __kmalloc_track_caller+0x16e/0x290
[<00000000236fd26b>] kstrdup+0x3e/0x70
[<00000000dd4a2815>] kstrdup_const+0x3e/0x50
[<0000000049a377fc>] kvasprintf_const+0x10e/0x160
[<00000000627fc711>] kobject_set_name_vargs+0x5b/0x140
[<0000000019eeab06>] dev_set_name+0xc0/0xf0
[<0000000069cb12bc>] netdev_register_kobject+0xc8/0x320
[<00000000f2e83732>] register_netdevice+0xa1b/0xf00
[<000000009e1f57cc>] __tun_chr_ioctl+0x20d5/0x3dd0
[<000000009c560784>] tun_chr_ioctl+0x2f/0x40
[<000000000d759e02>] do_vfs_ioctl+0x1c7/0x1510
[<00000000351d7c31>] ksys_ioctl+0x99/0xb0
[<000000008390040a>] __x64_sys_ioctl+0x78/0xb0
[<0000000052d196b7>] do_syscall_64+0x16f/0x580
[<0000000019af9236>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<00000000bc384531>] 0xffffffffffffffff
v3 -> v4:
Set reg_state to NETREG_UNREGISTERED if registering fails
v2 -> v3:
* Replaced BUG_ON with WARN_ON in free_netdev and netdev_release
v1 -> v2:
* Relying on driver calling free_netdev rather than calling
put_device directly in error path
Reported-by: syzbot+ad8ca40ecd77896d51e2@syzkaller.appspotmail.com
Cc: David Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d836f5c69d87473ff65c06a6123e5b2cf5e56f5b ]
rtnl_create_link() needs to apply dev->min_mtu and dev->max_mtu
checks that we apply in do_setlink()
Otherwise malicious users can crash the kernel, for example after
an integer overflow :
BUG: KASAN: use-after-free in memset include/linux/string.h:365 [inline]
BUG: KASAN: use-after-free in __alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238
Write of size 32 at addr ffff88819f20b9c0 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
__kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
kasan_report+0x12/0x20 mm/kasan/common.c:639
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x134/0x1a0 mm/kasan/generic.c:192
memset+0x24/0x40 mm/kasan/common.c:108
memset include/linux/string.h:365 [inline]
__alloc_skb+0x37b/0x5e0 net/core/skbuff.c:238
alloc_skb include/linux/skbuff.h:1049 [inline]
alloc_skb_with_frags+0x93/0x590 net/core/skbuff.c:5664
sock_alloc_send_pskb+0x7ad/0x920 net/core/sock.c:2242
sock_alloc_send_skb+0x32/0x40 net/core/sock.c:2259
mld_newpack+0x1d7/0x7f0 net/ipv6/mcast.c:1609
add_grhead.isra.0+0x299/0x370 net/ipv6/mcast.c:1713
add_grec+0x7db/0x10b0 net/ipv6/mcast.c:1844
mld_send_cr net/ipv6/mcast.c:1970 [inline]
mld_ifc_timer_expire+0x3d3/0x950 net/ipv6/mcast.c:2477
call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x6c3/0x1790 kernel/time/timer.c:1786
__do_softirq+0x262/0x98c kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x19b/0x1e0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0x1a3/0x610 arch/x86/kernel/apic/apic.c:1137
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
</IRQ>
RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61
Code: 98 6b ea f9 eb 8a cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 44 1c 60 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 34 1c 60 00 fb f4 <c3> cc 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 4e 5d 9a f9 e8 79
RSP: 0018:ffffffff89807ce8 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
RAX: 1ffffffff13266ae RBX: ffffffff8987a1c0 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffffffff8987aa54
RBP: ffffffff89807d18 R08: ffffffff8987a1c0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000
R13: ffffffff8a799980 R14: 0000000000000000 R15: 0000000000000000
arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:690
default_idle_call+0x84/0xb0 kernel/sched/idle.c:94
cpuidle_idle_call kernel/sched/idle.c:154 [inline]
do_idle+0x3c8/0x6e0 kernel/sched/idle.c:269
cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:361
rest_init+0x23b/0x371 init/main.c:451
arch_call_rest_init+0xe/0x1b
start_kernel+0x904/0x943 init/main.c:784
x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490
x86_64_start_kernel+0x77/0x7b arch/x86/kernel/head64.c:471
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:242
The buggy address belongs to the page:
page:ffffea00067c82c0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0
raw: 057ffe0000000000 ffffea00067c82c8 ffffea00067c82c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88819f20b880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88819f20b900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88819f20b980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88819f20ba00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88819f20ba80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e0b60903b434a7ee21ba8d8659f207ed84101e89 ]
Dev_hold has to be called always in netdev_queue_add_kobject.
Otherwise usage count drops below 0 in case of failure in
kobject_init_and_add.
Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Miller <davem@davemloft.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d027e3a83f39b819e908e4e09084277a2e45e95 ]
A difference of two unsigned long needs long storage.
Fixes: c7fb64db001f ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4c582234ab3948d08a24c82eb1e00436aabacbc6 upstream.
The commit cited below causes devlink to emit a warning if a type was
not set on a devlink port for longer than 30 seconds to "prevent
misbehavior of drivers". This proved to be problematic when
unregistering the backing netdev. The flow is always:
devlink_port_type_clear() // schedules the warning
unregister_netdev() // blocking
devlink_port_unregister() // cancels the warning
The call to unregister_netdev() can block for long periods of time for
various reasons: RTNL lock is contended, large amounts of configuration
to unroll following dismantle of the netdev, etc. This results in
devlink emitting a warning despite the driver behaving correctly.
In emulated environments (of future hardware) which are usually very
slow, the warning can also be emitted during port creation as more than
30 seconds can pass between the time the devlink port is registered and
when its type is set.
In addition, syzbot has hit this warning [1] 1974 times since 07/11/19
without being able to produce a reproducer. Probably because
reproduction depends on the load or other bugs (e.g., RTNL not being
released).
To prevent bogus warnings, increase the timeout to 1 hour.
[1] https://syzkaller.appspot.com/bug?id=e99b59e9c024a666c9f7450dc162a4b74d09d9cb
Fixes: 136bf27fc0e9 ("devlink: add warning in case driver does not set port type")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: syzbot+b0a18ed7b08b735d2f41@syzkaller.appspotmail.com
Reported-by: Alex Veber <alexve@mellanox.com>
Tested-by: Alex Veber <alexve@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|