summaryrefslogtreecommitdiff
path: root/net/mac80211/agg-rx.c
AgeCommit message (Collapse)Author
2022-10-07wifi: mac80211: remove support for AddBA with fragmentationJohannes Berg
HE added support for dynamic fragmentation inside aggregation sessions, but no existing driver ever advertises it. Thus, remove the code for now, it cannot work as-is in MLO. For it to properly work in MLO, we'd need to validate that the frag level is identical across all the link bands/iftypes, which is a good amount of complex code that's just not worth it as long as no driver has support for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: agg-rx: avoid band checkJohannes Berg
If the deflink of the station is on 6 GHz, then it won't have HT. If at the same time we're using MLO, then vif.bss_conf isn't used, and thus vif.bss_conf.chandef.chan is NULL, causing the code to crash. Fix this by just checking for both HT and HE, and refusing the aggregation session if both are not present. This might be a bit wrong since it would accept an aggregation session from a peer that has HE but no HT on 2.4 or 5 GHz, but such a peer shouldn't exist in the first place, and it probably supports aggregation if it has HE support. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: change AddBA deny error messageJohannes Berg
If the station has no HT, we deny the aggregation session but the error message talks about QoS; change it to say HT instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: mac80211: fix AddBA response addressingJohannes Berg
Since this frame is addressed from/to an MLD, it should be built with the correct AP MLD address (in station mode) to be encrypted properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: mac80211: fix multi-BSSID element parsingJohannes Berg
When parsing a frame containing a multi-BSSID element, we need to know both the transmitted and non-transmitted BSSID so we can parse it correctly. Unfortunately, in quite a number of cases, we got this wrong and were passing the wrong BSSID or useless information: * the mgmt->bssid from a frame is only the transmitted BSSID if the frame is a beacon * passing just one of the parameters as non-NULL isn't useful and ignored In those case where we need to parse for a specific BSS we always have a BSS structure pointer, representing the BSS we need, whether transmitted or not. Thus, pass that pointer to the parsing function instead of the two BSSIDs. Also fix two bugs: * we need to re-parse all the elements for the other BSS when iterating the non-transmitted BSSes in scan * we need to parse for the correct BSS when setting up the channel data in client code Fixes: 78ac51f81532 ("mac80211: support multi-bssid") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: reorg some iface data structs for MLDJohannes Berg
Start reorganizing interface related data structures toward MLD. The most complex part here is for the keys, since we have to split the various kinds of GTKs off to the link but still need to use (for WEP) the other keys as a fallback even for multicast frames. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16mac80211: parse AddBA request with extended AddBA elementMordechay Goodstein
In EHT requesting aggregation with 1K needs the use of extended the AddBA element for the buffer size, so add the logic to parse it and make sure it's in limits of the EHT aggregation size. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20220214173004.8209cae9d9e4.I434f5588602f83b4e658c660120040913b3a2e3d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-16ieee80211: add EHT 1K aggregation definitionsMordechay Goodstein
We add the fields for parsing extended ADDBA request/respond, and new max 1K aggregation for limit ADDBA request/respond. Adjust drivers to use the proper macro, IEEE80211_MAX_AMPDU_BUF -> IEEE80211_MAX_AMPDU_BUF_HE. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Link: https://lore.kernel.org/r/20220214173004.b8b447ce95b7.I0ee2554c94e89abc7a752b0f7cc7fd79c273efea@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-12-14mac80211: fix lookup when adding AddBA extension elementJohannes Berg
We should be doing the HE capabilities lookup based on the full interface type so if P2P doesn't have HE but client has it doesn't get confused. Fix that. Fixes: 2ab45876756f ("mac80211: add support for the ADDBA extension element") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211129152938.010fc1d61137.If3a468145f29d670cb00a693bed559d8290ba693@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21mac80211: fix memory leaks with element parsingJohannes Berg
My previous commit 5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems") had a few bugs and leaked the new allocated struct in a few error cases, fix that. Fixes: 5d24828d05f3 ("mac80211: always allocate struct ieee802_11_elems") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20211001211108.9839928e42e0.Ib81ca187d3d3af7ed1bfeac2e00d08a4637c8025@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-09-23mac80211: always allocate struct ieee802_11_elemsJohannes Berg
As the 802.11 spec evolves, we need to parse more and more elements. This is causing the struct to grow, and we can no longer get away with putting it on the stack. Change the API to always dynamically allocate and return an allocated pointer that must be kfree()d later. As an alternative, I contemplated a scheme whereby we'd say in the code which elements we needed, e.g. DECLARE_ELEMENT_PARSER(elems, SUPPORTED_CHANNELS, CHANNEL_SWITCH, EXT(KEY_DELIVERY)); ieee802_11_parse_elems(..., &elems, ...); and while I think this is possible and will save us a lot since most individual places only care about a small subset of the elements, it ended up being a bit more work since a lot of places do the parsing and then pass the struct to other functions, sometimes with multiple levels. Link: https://lore.kernel.org/r/20210920154009.26caff6b5998.I05ae58768e990e611aee8eca8abefd9d7bc15e05@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11mac80211: use bitfield helpers for BA session action framesJohannes Berg
Use the appropriate bitfield helpers for encoding and decoding the capability field in the BA session action frames instead of open-coding the shifts/masks. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20201206145305.0c46e5097cc0.I06e75706770c40b9ba1cabd1f8a78ab7a05c5b73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27net: mac80211: agg-rx.c: fix duplicated wordsRandy Dunlap
Change "If if" to "If it". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Link: https://lore.kernel.org/r/20200822231953.465-2-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-03mac8211: fix struct initialisationJohn Crispin
Sparse showed up with the following error. net/mac80211/agg-rx.c:480:43: warning: Using plain integer as NULL pointer Fixes: 2ab45876756f (mac80211: add support for the ADDBA extension element) Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20200803084540.179908-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-05-31mac80211: accept aggregation sessions on 6 GHzJohannes Berg
On 6 GHz, stations don't have ht_supported set, but they can still do aggregation since they must have HE, allow that. Link: https://lore.kernel.org/r/20200528213443.776d3c891b64.Ifa099d450617b50c691832b3c4aa08959fab520a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31mac80211: add missing null return check from call to ieee80211_get_sbandColin Ian King
The return from ieee80211_get_sband can potentially be a null pointer, so it seems prudent to add a null check to avoid a null pointer dereference on sband. Addresses-Coverity: ("Dereference null return") Fixes: 2ab45876756f ("mac80211: add support for the ADDBA extension element") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20190730143205.14261-1-colin.king@canonical.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29mac80211: add support for the ADDBA extension elementJohn Crispin
HE allows peers to negotiate the aggregation fragmentation level to be used during transmission. The level can be 1-3. The Ext element is added behind the ADDBA request inside the action frame. The responder will then reply with the same level or a lower one if the requested one is not supported. This patch only handles the negotiation part as the ADDBA frames get passed to the ATH11k firmware, which does the rest of the magic for us aswell as generating the requests. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190729104512.27615-1-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-18mac80211: add support for HELuca Coelho
Add support for HE in mac80211 conforming with P802.11ax_D1.4. Johannes: Fix another bug with the buf_size comparison in agg-rx.c. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Ido Yariv <idox.yariv@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-06-18ieee80211: bump IEEE80211_MAX_AMPDU_BUF to support HEJohannes Berg
Bump the IEEE80211_MAX_AMPDU_BUF size to 0x100 for HE support and - for now - use IEEE80211_MAX_AMPDU_BUF_HT everywhere. This is derived from my internal patch, parts of which Luca had sent upstream. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-27mac80211: agg-rx: Accept ADDBA request update if timeout did not changeIlan Peer
As there is no support for updating an existing ADDBA session with a peer, we decline the request (while keeping the session active). However, in case that the timeout did not change, there is no need to decline the request, so modify the code to reply with status success in such a case (this is useful for interoperability with APs that send an ADDBA request update without changing the timeout value). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-02-22Merge tag 'mac80211-for-davem-2018-02-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes across the tree, the shortlog basically says it all: cfg80211: fix cfg80211_beacon_dup -> old bug in this code cfg80211: clear wep keys after disconnection -> certain ways of disconnecting left the keys mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 -> alignment issues with using 14 bytes mac80211: Do not disconnect on invalid operating class -> if the AP has a bogus operating class, let it be mac80211: Fix sending ADDBA response for an ongoing session -> don't send the same frame twice cfg80211: use only 1Mbps for basic rates in mesh -> interop issue with old versions of our code mac80211_hwsim: don't use WQ_MEM_RECLAIM -> it causes splats because it flushes work on a non-reclaim WQ regulatory: add NUL to request alpha2 -> nla_put_string() issue from Kees mac80211: mesh: fix wrong mesh TTL offset calculation -> protocol issue mac80211: fix a possible leak of station stats -> error path might leak memory mac80211: fix calling sleeping function in atomic context -> percpu allocations need to be made with gfp flags ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19mac80211: Fix sending ADDBA response for an ongoing sessionIlan Peer
In case an ADDBA request is received while there is already an ongoing BA sessions with the same parameters, i.e., update flow, an ADBBA response with decline status was sent twice. Fix it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: make __ieee80211_start_rx_ba_session staticJohannes Berg
The function is only used with the file, so make it static. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11mac80211: avoid looking up tid_tx/tid_rx from timersJohannes Berg
There's no need to re-lookup the data structures now that we actually get them immediately with from_timer(), just avoid that. The struct has to be valid anyway, otherwise the timer object itself would no longer be valid, and we can't have a different version of the struct since only a single session per TID is permitted. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-20mac80211: aggregation: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. This removes the tid mapping array and expands the tid structures to add a pointer back to the station, along with the tid index itself. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> [switch tid variables to u8, the valid range is 0-15 at most, initialize tid_tx->sta/tid properly] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-21mac80211: add documentation to ieee80211_rx_ba_offl()Luca Coelho
Add documentation to ieee80211_rx_ba_offl() function and, while at it, rename the bit argument to tid, for consistency. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-06mac80211: fix deadlock in driver-managed RX BA session startJohannes Berg
When an RX BA session is started by the driver, and it has to tell mac80211 about it, the corresponding bit in tid_rx_manage_offl gets set and the BA session work is scheduled. Upon testing this bit, it will call __ieee80211_start_rx_ba_session(), thus deadlocking as it already holds the ampdu_mlme.mtx, which that acquires again. Fix this by adding ___ieee80211_start_rx_ba_session(), a version of the function that requires the mutex already held. Cc: stable@vger.kernel.org Fixes: 699cb58c8a52 ("mac80211: manage RX BA session offload without SKB queue") Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-08-09mac80211: add api to start ba session timer expired flowNaftali Goldstein
Some drivers handle rx buffer reordering internally (and by extension handle also the rx ba session timer internally), but do not ofload the addba/delba negotiation. Add an api for these drivers to properly tear-down the ba session, including sending a delba. Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-16networking: convert many more places to skb_put_zero()Johannes Berg
There were many places that my previous spatch didn't find, as pointed out by yuan linyu in various patches. The following spatch found many more and also removes the now unnecessary casts: @@ identifier p, p2; expression len; expression skb; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_zero(skb, len); | -p = (t)skb_put(skb, len); +p = skb_put_zero(skb, len); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, len); | -memset(p, 0, len); ) @@ type t, t2; identifier p, p2; expression skb; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_zero(skb, sizeof(t)); ) ... when != p ( p2 = (t2)p; -memset(p2, 0, sizeof(*p)); | -memset(p, 0, sizeof(*p)); ) @@ expression skb, len; @@ -memset(skb_put(skb, len), 0, len); +skb_put_zero(skb, len); Apply it to the tree (with one manual fixup to keep the comment in vxlan.c, which spatch removed.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-08mac80211: manage RX BA session offload without SKB queueJohannes Berg
Instead of using the SKB queue with the fake pkt_type for the offloaded RX BA session management, also handle this with the normal aggregation state machine worker. This also makes the use of this more reliable since it gets rid of the allocation of the fake skb. Combined with the previous patch, this finally allows us to get rid of the pkt_type hack entirely, so do that as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06mac80211: Use setup_timer instead of init_timerOndřej Lysoněk
Use setup_timer() and setup_deferrable_timer() to set the data and function timer fields. It makes the code cleaner and will allow for easier change of the timer struct internals. Signed-off-by: Ondřej Lysoněk <ondrej.lysonek@seznam.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: <linux-wireless@vger.kernel.org> Cc: <netdev@vger.kernel.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-27mac80211: fix typo in debug printSara Sharon
Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-27mac80211: don't reorder frames with SN smaller than SSNSara Sharon
When RX aggregation starts, transmitter may continue send frames with SN smaller than SSN until the AddBA response is received. However, the reorder buffer is already initialized at this point, which will cause the drop of such frames as duplicates since the head SN of the reorder buffer is set to the SSN, which is bigger. Cc: stable@vger.kernel.org Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-19mac80211: fix tid_agg_rx NULL dereferenceJohannes Berg
On drivers setting the SUPPORTS_REORDERING_BUFFER hardware flag, we crash when the peer sends an AddBA request while we already have a session open on the seame TID; this is because on those drivers, the tid_agg_rx is left NULL even though the session is valid, and the agg_session_valid bit is set. To fix this, store the dialog tokens outside the tid_agg_rx to be able to compare them to the received AddBA request. Fixes: f89e07d4cf26 ("mac80211: agg-rx: refuse ADDBA Request with timeout update") Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2016-09-15mac80211: reject TSPEC TIDs (TSIDs) for aggregationJohannes Berg
Since mac80211 doesn't currently support TSIDs 8-15 which can only be used after QoS TSPEC negotiation (and not even after WMM negotiation), reject attempts to set up aggregation sessions for them, which might confuse drivers. In mac80211 we do correctly handle that, but the TSIDs should never get used anyway, and drivers might not be able to handle it. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-12mac80211: send delBA on unexpected BlockAck data framesJohannes Berg
When we receive data frames with ACK policy BlockAck, send delBA as requested by the 802.11 spec. Since this would be happening for every frame inside an A-MPDU if it's really received outside a session, limit it to a single attempt. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-12mac80211: RX BA support for sta max_rx_aggregation_subframesMaxim Altshul
The ability to change the max_rx_aggregation frames is useful in cases of IOP. There exist some devices (latest mobile phones and some AP's) that tend to not respect a BA sessions maximum size (in Kbps). These devices won't respect the AMPDU size that was negotiated during association (even though they do respect the maximal number of packets). This violation is characterized by a valid number of packets in a single AMPDU. Even so, the total size will exceed the size negotiated during association. Eventually, this will cause some undefined behavior, which in turn causes the hw to drop packets, causing the throughput to plummet. This patch will make the subframe limitation to be held by each station, instead of being held only by hw. Signed-off-by: Maxim Altshul <maxim.altshul@ti.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-07-06mac80211: agg-rx: refuse ADDBA Request with timeout updateJohannes Berg
The current implementation of handling ADDBA Request while a session is already active with the peer is wrong - in case the peer is using the existing session's dialog token this should be treated as update to the session, which can update the timeout value. We don't really have a good way of supporting that, so reject, but implement the required behaviour in the spec of "Even if the updated ADDBA Request frame is not accepted, the original Block ACK setup remains active." (802.11-2012 10.5.4) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-24mac80211: add API to allow filtering frames in BA sessionsSara Sharon
If any frames are dropped that are part of a BA session, the reorder buffer will "indefinitely" (until the timeout) wait for them to come in (or a BAR moving the window) and won't release frames after them. This means it isn't possible to filter frames within a BA session in firmware. Introduce an API function that allows such filtering. Calling this function will move the BA window forward to the new SSN, and allows marking frames after the SSN as having been filtered, so any future reordering activity will release frames while skipping the holes. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24mac80211: support hw managing reorder logicSara Sharon
Enable driver to manage the reordering logic itself. This is needed for example for the iwlwifi driver that will support hardware assisted reordering. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-29mac80211: fix use of uninitialised values in RX aggregationChris Bainbridge
Use kzalloc instead of kmalloc for struct tid_ampdu_rx to initialize the "removed" field (all others are initialized manually). That fixes: UBSAN: Undefined behaviour in net/mac80211/rx.c:932:29 load of value 2 is not a valid value for type '_Bool' CPU: 3 PID: 1134 Comm: kworker/u16:7 Not tainted 4.5.0-rc1+ #265 Workqueue: phy0 rt2x00usb_work_rxdone 0000000000000004 ffff880254a7ba50 ffffffff8181d866 0000000000000007 ffff880254a7ba78 ffff880254a7ba68 ffffffff8188422d ffffffff8379b500 ffff880254a7bab8 ffffffff81884747 0000000000000202 0000000348620032 Call Trace: [<ffffffff8181d866>] dump_stack+0x45/0x5f [<ffffffff8188422d>] ubsan_epilogue+0xd/0x40 [<ffffffff81884747>] __ubsan_handle_load_invalid_value+0x67/0x70 [<ffffffff82227b4d>] ieee80211_sta_reorder_release.isra.16+0x5ed/0x730 [<ffffffff8222ca14>] ieee80211_prepare_and_rx_handle+0xd04/0x1c00 [<ffffffff8222db03>] __ieee80211_rx_handle_packet+0x1f3/0x750 [<ffffffff8222e4a7>] ieee80211_rx_napi+0x447/0x990 While at it, convert to use sizeof(*tid_agg_rx) instead. Fixes: 788211d81bfdf ("mac80211: fix RX A-MPDU session reorder timer deletion") Cc: stable@vger.kernel.org Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> [reword commit message, use sizeof(*tid_agg_rx)] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: pass block ack session timeout to to driverSara Sharon
Currently mac80211 does not inform the driver of the session block ack timeout when starting a rx aggregation session. Drivers that manage the reorder buffer need to know this parameter. Seeing that there are now too many arguments for the drv_ampdu_action() function, wrap them inside a structure. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: pass RX aggregation window size to driverSara Sharon
Currently mac80211 does not inform the driver of the window size when starting an RX aggregation session. To enable managing the reorder buffer in the driver or hardware the window size is needed. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: allow the driver to advertise A-MSDU within A-MPDU Rx supportEmmanuel Grumbach
Drivers may be interested in receiving A-MSDU within A-MDPU. Not all the devices may be able to do so, make it configurable. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-09-22mac80211: allow to transmit A-MSDU within A-MPDUEmmanuel Grumbach
Advertise the capability to send A-MSDU within A-MPDU in the AddBA request sent by mac80211. Let the driver know about the peer's capabilities. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-16 04:05:02 +0000