summaryrefslogtreecommitdiff
path: root/net/mac802154
AgeCommit message (Collapse)Author
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07mac802154: at86rf230: add hw flags and merge opsAlexander Aring
This patch adds new mac802154 hw flags for transmit power, csma and listen before transmit (lbt). These flags indicates that the transceiver supports these features. If the flags are set and the driver doesn't implement the necessary functions, then ieee802154_register_device returns -ENOSYS "Function not implemented". This patch merges also all at86rf230 operations into one operations structure and set the right hw flags for the at86rf230 transceivers. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-076lowpan: mac802154: fix coding style issuesVarka Bhadram
This patch fixed the coding style issues reported by checkpatch.pl following issues fixed: CHECK: Alignment should match open parenthesis WARNING: line over 80 characters CHECK: Blank lines aren't necessary before a close brace '}' WARNING: networking block comments don't use an empty /* line, use /* Comment... WARNING: Missing a blank line after declarations WARNING: networking block comments start with * on subsequent lines CHECK: braces {} should be used on all arms of this statement Signed-off-by: Varka Bhadram <varkab@cdac.in> Tested-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11mac802154: don't deliver packets to devices that are downPhoebe Buckheister
Only one WPAN devices can be active at any given time, so only deliver packets to that one interface that is actually up. Multiple monitors may be up at any given time, but we don't have to deliver to monitors that are down either. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11mac802154: properly free incoming skbs on decryption failurePhoebe Buckheister
mac802154 RX did not free skbs on decryption failure, assuming that the caller would when the local rx handler returned _DROP. This was false. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-06mac802154: llsec: add forgotten list_del_rcu in key removalPhoebe Buckheister
During key removal, the key object is freed, but not taken out of the llsec key list properly. Fix that. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22mac802154: llsec: correctly lookup implicit-indexed keysPhoebe Buckheister
Key id comparison for type 1 keys (implicit source, with index) should return true if mode and id are equal, not false. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22mac802154: llsec: fold useless return value checkPhoebe Buckheister
llsec_do_encrypt will never return a positive value, so the restriction to 0-or-negative on return is useless. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22mac802154: llsec: fix incorrect lock pairingPhoebe Buckheister
In encrypt, sec->lock is taken with read_lock_bh, so in the error path, we must read_unlock_bh. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16ieee802154, mac802154: implement devkey record optionPhoebe Buckheister
The 802.15.4-2011 standard states that for each key, a list of devices that use this key shall be kept. Previous patches have only considered two options: * a device "uses" (or may use) all keys, rendering the list useless * a device is restricted to a certain set of keys Another option would be that a device *may* use all keys, but need not do so, and we are interested in the actual set of keys the device uses. Recording keys used by any given device may have a noticable performance impact and might not be needed as often. The common case, in which a device will not switch keys too often, should still perform well. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16mac802154: propagate device address changes to llsecPhoebe Buckheister
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16mac802154: add llsec configuration functionsPhoebe Buckheister
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16mac802154: integrate llsec with wpan devicesPhoebe Buckheister
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16mac802154: add llsec decryption methodPhoebe Buckheister
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16mac802154: add llsec encryption methodPhoebe Buckheister
Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16mac802154: add llsec structures and mutatorsPhoebe Buckheister
This patch adds containers and mutators for the major ieee802154_llsec structures to mac802154. Most of the (rather simple) ieee802154_llsec structs are wrapped only to provide an rcu_head for orderly disposal, but some structs - llsec keys notably - require more complex bookkeeping. Since each llsec key may be referenced by a number of llsec key table entries (with differing key ids, but the same actual key), we want to save memory and not allocate crypto transforms for each entry in the table. Thus, the mac802154 llsec key is reference-counted instead. Further, each key will have four associated crypto transforms - three CCM transforms for the authsizes 4/8/16 and one CTR transform for unauthenticated encryption. If we had a CCM* transform that allowed authsize 0, and authsize as part of requests instead of transforms, this would not be necessary. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16mac802154: update KconfigPhoebe Buckheister
Link-layer security requires AES CCM for authenticated modes and AES CTR for the unauthenticated encryption mode. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15mac802154: make mac802154_wpan_open staticPhoebe Buckheister
This function is only used within the same translation unit, so mark it static. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15ieee802154: change _cb handling slightlyPhoebe Buckheister
The current mac_cb handling of ieee802154 is rather awkward and limited. Decompose the single flags field into multiple fields with the meanings of each subfield of the flags field to make future extensions (for example, link-layer security) easier. Also don't set the frame sequence number in upper layers, since that's a thing the MAC is supposed to set on frame transmit - we set it on header creation, but assuming that upper layers do not blindly duplicate our headers, this is fine. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15mac802154: account for all header parts during wpan header creationgPhoebe Buckheister
The current WPAN header creation code checks for EMSGSIZE conditions, but does not account for the MIC field that link layer security may add at the end of the frame. Now that we can accurately calculate the maximum payload size of packets, use that to check for EMSGSIZE conditions. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-07mac802154: fix duplicate #include headersJean Sacren
The commit e6278d92005e ("mac802154: use header operations to create/parse headers") included the header net/ieee802154_netdev.h which had been included by the commit b70ab2e87f17 ("ieee802154: enforce consistent endianness in the 802.15.4 stack"). Fix this duplicate #include by deleting the latter one as the required header has already been in place. Signed-off-by: Jean Sacren <sakiwit@gmail.com> Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Cc: linux-zigbee-devel@lists.sourceforge.net Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-01mac802154: make csma/cca parameters per-wpanPhoebe Buckheister
Commit 9b2777d6089bcd (ieee802154: add TX power control to wpan_phy) and following erroneously added CSMA and CCA parameters for 802.15.4 devices as PHY parameters, while they are actually MAC parameters and can differ for any two WPAN instances. Since it is now sensible to have multiple WPAN devices with differing CSMA/CCA parameters, make these parameters MAC parameters instead. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-01mac802154: allow only one WPAN to be up at any given timePhoebe Buckheister
All 802.15.4 PHY devices with drivers in tree can support only one WPAN at any given time, yet the stack allows arbitrarily many WPAN devices to be created and up at the same time. This cannot work with what the hardware provides, and in the current implementation, provides an easy DoS vector to any process on the system that may call socket() and sendmsg(). Thus, allow only one WPAN per PHY to be up at once, just like mac80211 does for managed devices. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14ieee802154: add proper length checks to header creationsPhoebe Buckheister
Have mac802154 header_ops.create fail with -EMSGSIZE if the length passed will be too large to fit a frame. Since 6lowpan will ensure that no packet payload will be too large, pass a length of 0 there. 802.15.4 dgram sockets will also return -EMSGSIZE on payloads larger than the device MTU instead of -EINVAL. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14ieee802154: use ieee802154_addr instead of *_sa variantsPhoebe Buckheister
Change all internal uses of ieee802154_addr_sa to ieee802154_addr, except for those instances that communicate directly with userspace. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14mac802154: use header operations to create/parse headersPhoebe Buckheister
Use the operations on 802.15.4 header structs introduced in a previous patch to create and parse all headers in the mac802154 stack. This patch reduces code duplication between different parts of the mac802154 stack that needed information from headers, and also fixes a few bugs that seem to have gone unnoticed until now: * 802.15.4 dgram sockets would return a slightly incorrect value for the SIOCINQ ioctl * mac802154 would not drop frames with the "security enabled" bit set, even though it does not support security, in violation of the standard Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14ieee802154: enforce consistent endianness in the 802.15.4 stackPhoebe Buckheister
Enable sparse warnings about endianness, replace the remaining fields regarding network operations without explicit endianness annotations with such that are annotated, and propagate this through the entire stack. Uses of ieee802154_addr_sa are not changed yet, this patch is only concerned with all other fields (such as address filters, operation parameters and the likes). Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14ieee802154: rename struct ieee802154_addr to *_saPhoebe Buckheister
The struct as currently defined uses host byte order for some fields, and most big endian/EUI display byte order for other fields. Inside the stack, endianness should ideally match network byte order where possible to minimize the number of byteswaps done in critical paths, but this patch does not address this; it is only preparatory. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ieee802154: add netlink APIs for smartMAC configurationPhoebe Buckheister
Introduce new netlink attributes for SET_PHY_ATTRS: * CSMA minimal backoff exponent * CSMA maximal backoff exponent * CSMA retry limit * frame retransmission limit The CSMA attributes shall correspond to minBE, maxBE and maxCSMABackoffs of 802.15.4, respectively. The frame retransmission shall correspond to maxFrameRetries of 802.15.4, unless given as -1: then the old behaviour of the stack shall apply. For RF2xy, the old behaviour is to not do channel sensing at all and simply send *right now*, which is not intended behaviour for most applications and actually prohibited for some channel/page combinations. For all values except frame retransmission limit, the defaults of 802.15.4 apply. Frame retransmission limits are set to -1 to indicate backward-compatible behaviour. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ieee802154: add support for setting CCA energy detection levelsPhoebe Buckheister
Since three of the four clear channel assesment modes make use of energy detection, provide an API to set the energy detection threshold. Driver support for this is available in at86rf230 for the RF212 chips. Since for these chips the minimal energy detection threshold depends on page and channel used, add a field to struct at86rf230_local that stores the minimal threshold. Actual ED thresholds are configured as offsets from this value. For RF212, setting the ED threshold will not work before a channel/page has been set due to the dependency of energy detection in the chip and the actual channel/page selected. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ieee802154: add support for CCA mode in wpan physPhoebe Buckheister
The standard describes four modes of clear channel assesment: "energy above threshold", "carrier found", and the logical and/or of these two. Support for CCA mode setting is included in the at86rf230 driver, predicated for RF212 chips. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ieee802154: add support for listen-before-talk in wpan_phyPhoebe Buckheister
Listen-before-talk is an alternative to CSMA in uncoordinated networks and prescribed by european regulations if one wants to have a device with radio duty cycles above 10% (or less in some bands). Add a phy property to enable/disable LBT in the phy, including support in the at86rf230 driver for RF212 chips. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17ieee802154: add TX power control to wpan_phyPhoebe Buckheister
Replace the current u8 transmit_power in wpan_phy with s8 transmit_power. The u8 field contained the actual tx power and a tolerance field, which no physical radio every used. Adjust sysfs entries to keep compatibility with userspace, give tolerances of +-1dB statically there. This patch only adds support for this in the at86rf230 driver and the RF212 chip. Configuration calculation for RF212 is also somewhat basic, but does the job - the RF212 datasheet gives a large table with suggested values for combinations of TX power and page/channel, if this does not work well, we might have to copy the whole table. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13net: remove unnecessary return'sstephen hemminger
One of my pet coding style peeves is the practice of adding extra return; at the end of function. Kill several instances of this in network code. I suppose some coccinelle wizardy could do this automatically. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-22mac802154: fix following checkpath.pl warning Prefer pr_warn(... to ↵Weilong Chen
pr_warning(... This patch fixes checkpath.pl: WARNING: Prefer pr_warn(... to pr_warning(... #447: FILE: ./wpan.c:447: Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-306lowpan: set and use mac_len for mac header lengthAlexander Aring
Set the mac header length while creating the 802.15.4 mac header. Drop the function for recalculate mac header length in upper layers which was static and works for intra pan communication only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-30mac802154: Use pr_err(...) rather than printk(KERN_ERR ...)Chen Weilong
This change is inspired by checkpatch. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/net/ethernet/emulex/benet/be.h include/net/tcp.h net/mac802154/mac802154.h Most conflicts were minor overlapping stuff. The be2net driver brought in some fixes that added __vlan_put_tag calls, which in net-next take an additional argument. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29net: mac802154: comparision issue of type cast, finding by EXTRA_CFLAGS=-WChen Gang
Change MAC802154_CHAN_NONE from ~(u8)0 to 0xff, or the comparison in mac802154_wpan_xmit() for ``chan == MAC802154_CHAN_NONE'' will not succeed. This bug can be boiled down to ``u8 foo = 0xff; if (foo == ~(u8)0) [...] else [...]'' where the condition will always take the else branch. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08mac802154: Keep track of the channel when changedAlan Ott
Two sections checked whether the current channel != the new channel without ever setting the current channel variables. 1. net/mac802154/tx.c: Prevent set_channel() from getting called every time a packet is sent. 2. net/mac802154/mib.c: Lock (pib_lock) accesses to current_channel and current_page and make sure they are updated when the channel has been changed. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07mac802154: Increase tx_buffer_lenAlan Ott
Increase the buffer length from 10 to 300 packets. Consider that traffic on mac802154 devices will often be 6LoWPAN, and a full-length (1280 octet) IPv6 packet will fragment into 15 6LoWPAN fragments (because the MTU of IEEE 802.15.4 is 127). A 300-packet queue is really 20 full-length IPv6 packets. With a queue length of 10, an entire IPv6 packet was unable to get queued at one time, causing fragments to be dropped, and making reassembly impossible. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07mac802154: Use netif flow controlAlan Ott
Use netif_stop_queue() and netif_wake_queue() to control the flow of packets to mac802154 devices. Since many IEEE 802.15.4 devices have no output buffer, and since the mac802154 xmit() function is designed to block, netif_stop_queue() is called after each packet. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07mac802154: Do not try to resend failed packetsAlan Ott
When ops->xmit() fails, drop the packet. Devices which support hardware ack and retry (which include all devices currently supported by mainline), will automatically retry sending the packet (in the hardware) up to 3 times, per the 802.15.4 spec. There is no need, and it is incorrect to try to do it in mac802154. Signed-off-by: Alan Ott <alan@signal11.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26mac802154: add mac802154_dev_get_dsn()Tony Cheneau
Bring-over mac802154_dev_get_dsn() function that was present in the Linux ZigBee kernel. This function is called by the 6LoWPAN code in order to properly set the DSN (Data Sequence Number) value in the IEEE 802.15.4 frame. Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26mac802154: turn on ACK when enabled by the upper layersTony Cheneau
Signed-off-by: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-06wpan: use stack buffer instead of heapAlexander Aring
head buffer is only temporary available in mac802154_header_create. So it's not necessary to put it on the heap. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06wpan: whitespace fixAlexander Aring
Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11net/mac802154: remove depends on CONFIG_EXPERIMENTALKees Cook
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> CC: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net>
2013-01-04mac802154: fix NOHZ local_softirq_pending 08 warningAlexander Aring
When using nanosleep() in an userspace application we get a ratelimit warning NOHZ: local_softirq_pending 08 for 10 times. This patch replaces netif_rx() with netif_rx_ni() which has to be used from process/softirq context. The process/softirq context will be called from fakelb driver. See linux-kernel commit 481a819 for similar fix. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>