summaryrefslogtreecommitdiff
path: root/net/vmw_vsock
AgeCommit message (Collapse)Author
2023-02-21Merge tag 'net-next-6.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-01-17Drivers: hv: Make remove callback of hyperv driver void returnedDawei Li
Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. As such, change the remove function for Hyper-V VMBus based drivers to return void. Signed-off-by: Dawei Li <set_pte_at@outlook.com> Link: https://lore.kernel.org/r/TYCP286MB2323A93C55526E4DF239D3ACCAFA9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Wei Liu <wei.liu@kernel.org>
2023-01-16virtio/vsock: replace virtio_vsock_pkt with sk_buffBobby Eshleman
This commit changes virtio/vsock to use sk_buff instead of virtio_vsock_pkt. Beyond better conforming to other net code, using sk_buff allows vsock to use sk_buff-dependent features in the future (such as sockmap) and improves throughput. This patch introduces the following performance changes: Tool: Uperf Env: Phys Host + L1 Guest Payload: 64k Threads: 16 Test Runs: 10 Type: SOCK_STREAM Before: commit b7bfaa761d760 ("Linux 6.2-rc3") Before ------ g2h: 16.77Gb/s h2g: 10.56Gb/s After ----- g2h: 21.04Gb/s h2g: 10.76Gb/s Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-12vsock: return errors other than -ENOMEM to socketBobby Eshleman
This removes behaviour, where error code returned from any transport was always switched to ENOMEM. For example when user tries to send too big message via SEQPACKET socket, transport layers return EMSGSIZE, but this error code was always replaced with ENOMEM and returned to user. Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-12-13Merge tag 'net-next-6.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
2022-12-09net: vmw_vsock: vmci: Check memcpy_from_msg()Artem Chernyshev
vmci_transport_dgram_enqueue() does not check the return value of memcpy_from_msg(). If memcpy_from_msg() fails, it is possible that uninitialized memory contents are sent unintentionally instead of user's message in the datagram to the destination. Return with an error if memcpy_from_msg() fails. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 0f7db23a07af ("vmci_transport: switch ->enqeue_dgram, ->enqueue_stream and ->dequeue_stream to msghdr") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18treewide: use get_random_u32_{above,below}() instead of manual loopJason A. Donenfeld
These cases were done with this Coccinelle: @@ expression E; identifier I; @@ - do { ... when != I - I = get_random_u32(); ... when != I - } while (I > E); + I = get_random_u32_below(E + 1); @@ expression E; identifier I; @@ - do { ... when != I - I = get_random_u32(); ... when != I - } while (I >= E); + I = get_random_u32_below(E); @@ expression E; identifier I; @@ - do { ... when != I - I = get_random_u32(); ... when != I - } while (I < E); + I = get_random_u32_above(E - 1); @@ expression E; identifier I; @@ - do { ... when != I - I = get_random_u32(); ... when != I - } while (I <= E); + I = get_random_u32_above(E); @@ identifier I; @@ - do { ... when != I - I = get_random_u32(); ... when != I - } while (!I); + I = get_random_u32_above(0); @@ identifier I; @@ - do { ... when != I - I = get_random_u32(); ... when != I - } while (I == 0); + I = get_random_u32_above(0); @@ expression E; @@ - E + 1 + get_random_u32_below(U32_MAX - E) + get_random_u32_above(E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-11-03vsock: fix possible infinite sleep in vsock_connectible_wait_data()Dexuan Cui
Currently vsock_connectible_has_data() may miss a wakeup operation between vsock_connectible_has_data() == 0 and the prepare_to_wait(). Fix the race by adding the process to the wait queue before checking vsock_connectible_has_data(). Fixes: b3f7fd54881b ("af_vsock: separate wait data loop") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reported-by: Frédéric Dalleau <frederic.dalleau@docker.com> Tested-by: Frédéric Dalleau <frederic.dalleau@docker.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-03vsock: remove the unused 'wait' in vsock_connectible_recvmsg()Dexuan Cui
Remove the unused variable introduced by 19c1b90e1979. Fixes: 19c1b90e1979 ("af_vsock: separate receive data loop") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in the left-over fixes before the net-next pull-request. Conflicts: drivers/net/ethernet/mediatek/mtk_ppe.c ae3ed15da588 ("net: ethernet: mtk_eth_soc: fix state in __mtk_foe_entry_clear") 9d8cb4c096ab ("net: ethernet: mtk_eth_soc: add foe_entry_size to mtk_eth_soc") https://lore.kernel.org/all/6cb6893b-4921-a068-4c30-1109795110bb@tessares.net/ kernel/bpf/helpers.c 8addbfc7b308 ("bpf: Gate dynptr API behind CAP_BPF") 5679ff2f138f ("bpf: Move bpf_loop and bpf_for_each_map_elem under CAP_BPF") 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types") https://lore.kernel.org/all/20221003201957.13149-1-daniel@iogearbox.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-29vhost/vsock: Use kvmalloc/kvfree for larger packets.Junichi Uekawa
When copying a large file over sftp over vsock, data size is usually 32kB, and kmalloc seems to fail to try to allocate 32 32kB regions. vhost-5837: page allocation failure: order:4, mode:0x24040c0 Call Trace: [<ffffffffb6a0df64>] dump_stack+0x97/0xdb [<ffffffffb68d6aed>] warn_alloc_failed+0x10f/0x138 [<ffffffffb68d868a>] ? __alloc_pages_direct_compact+0x38/0xc8 [<ffffffffb664619f>] __alloc_pages_nodemask+0x84c/0x90d [<ffffffffb6646e56>] alloc_kmem_pages+0x17/0x19 [<ffffffffb6653a26>] kmalloc_order_trace+0x2b/0xdb [<ffffffffb66682f3>] __kmalloc+0x177/0x1f7 [<ffffffffb66e0d94>] ? copy_from_iter+0x8d/0x31d [<ffffffffc0689ab7>] vhost_vsock_handle_tx_kick+0x1fa/0x301 [vhost_vsock] [<ffffffffc06828d9>] vhost_worker+0xf7/0x157 [vhost] [<ffffffffb683ddce>] kthread+0xfd/0x105 [<ffffffffc06827e2>] ? vhost_dev_set_owner+0x22e/0x22e [vhost] [<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3 [<ffffffffb6eb332e>] ret_from_fork+0x4e/0x80 [<ffffffffb683dcd1>] ? flush_kthread_worker+0xf3/0xf3 Work around by doing kvmalloc instead. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Signed-off-by: Junichi Uekawa <uekawa@chromium.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20220928064538.667678-1-uekawa@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-16vsock/vmci: fix repeated words in commentsJilin Yuan
Delete the redundant word 'that'. Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-23vmci/vsock: check SO_RCVLOWAT before wake up readerArseniy Krasnov
This adds extra condition to wake up data reader: do it only when number of readable bytes >= SO_RCVLOWAT. Otherwise, there is no sense to kick user, because it will wait until SO_RCVLOWAT bytes will be dequeued. This check is performed in vsock_data_ready(). Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-23virtio/vsock: check SO_RCVLOWAT before wake up readerArseniy Krasnov
This adds extra condition to wake up data reader: do it only when number of readable bytes >= SO_RCVLOWAT. Otherwise, there is no sense to kick user,because it will wait until SO_RCVLOWAT bytes will be dequeued. This check is performed in vsock_data_ready(). Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-23vsock: add API call for data readyArseniy Krasnov
This adds 'vsock_data_ready()' which must be called by transport to kick sleeping data readers. It checks for SO_RCVLOWAT value before waking user, thus preventing spurious wake ups. Based on 'tcp_data_ready()' logic. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-23vsock: pass sock_rcvlowat to notify_poll_in as targetArseniy Krasnov
Passing 1 as the target to notify_poll_in(), we don't honor what the user has set via SO_RCVLOWAT, going to set POLLIN and POLLRDNORM, even if we don't have the amount of bytes expected by the user. Let's use sock_rcvlowat() to get the right target to pass to notify_poll_in(); Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-23vmci/vsock: use 'target' in notify_poll_in callbackArseniy Krasnov
This callback controls setting of POLLIN, POLLRDNORM output bits of poll() syscall, but in some cases, it is incorrectly to set it, when socket has at least 1 bytes of available data. Use 'target' which is already exists. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-23virtio/vsock: use 'target' in notify_poll_in callbackArseniy Krasnov
This callback controls setting of POLLIN, POLLRDNORM output bits of poll() syscall, but in some cases, it is incorrectly to set it, when socket has at least 1 bytes of available data. Use 'target' which is already exists. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-23hv_sock: disable SO_RCVLOWAT supportArseniy Krasnov
For Hyper-V it is quiet difficult to support this socket option,due to transport internals, so disable it. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-23vsock: SO_RCVLOWAT transport set callbackArseniy Krasnov
This adds transport specific callback for SO_RCVLOWAT, because in some transports it may be difficult to know current available number of bytes ready to read. Thus, when SO_RCVLOWAT is set, transport may reject it. Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-08-10vsock: Set socket state back to SS_UNCONNECTED in vsock_connect_timeout()Peilin Ye
Imagine two non-blocking vsock_connect() requests on the same socket. The first request schedules @connect_work, and after it times out, vsock_connect_timeout() sets *sock* state back to TCP_CLOSE, but keeps *socket* state as SS_CONNECTING. Later, the second request returns -EALREADY, meaning the socket "already has a pending connection in progress", even though the first request has already timed out. As suggested by Stefano, fix it by setting *socket* state back to SS_UNCONNECTED, so that the second request will return -ETIMEDOUT. Suggested-by: Stefano Garzarella <sgarzare@redhat.com> Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-10vsock: Fix memory leak in vsock_connect()Peilin Ye
An O_NONBLOCK vsock_connect() request may try to reschedule @connect_work. Imagine the following sequence of vsock_connect() requests: 1. The 1st, non-blocking request schedules @connect_work, which will expire after 200 jiffies. Socket state is now SS_CONNECTING; 2. Later, the 2nd, blocking request gets interrupted by a signal after a few jiffies while waiting for the connection to be established. Socket state is back to SS_UNCONNECTED, but @connect_work is still pending, and will expire after 100 jiffies. 3. Now, the 3rd, non-blocking request tries to schedule @connect_work again. Since @connect_work is already scheduled, schedule_delayed_work() silently returns. sock_hold() is called twice, but sock_put() will only be called once in vsock_connect_timeout(), causing a memory leak reported by syzbot: BUG: memory leak unreferenced object 0xffff88810ea56a40 (size 1232): comm "syz-executor756", pid 3604, jiffies 4294947681 (age 12.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 28 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............ backtrace: [<ffffffff837c830e>] sk_prot_alloc+0x3e/0x1b0 net/core/sock.c:1930 [<ffffffff837cbe22>] sk_alloc+0x32/0x2e0 net/core/sock.c:1989 [<ffffffff842ccf68>] __vsock_create.constprop.0+0x38/0x320 net/vmw_vsock/af_vsock.c:734 [<ffffffff842ce8f1>] vsock_create+0xc1/0x2d0 net/vmw_vsock/af_vsock.c:2203 [<ffffffff837c0cbb>] __sock_create+0x1ab/0x2b0 net/socket.c:1468 [<ffffffff837c3acf>] sock_create net/socket.c:1519 [inline] [<ffffffff837c3acf>] __sys_socket+0x6f/0x140 net/socket.c:1561 [<ffffffff837c3bba>] __do_sys_socket net/socket.c:1570 [inline] [<ffffffff837c3bba>] __se_sys_socket net/socket.c:1568 [inline] [<ffffffff837c3bba>] __x64_sys_socket+0x1a/0x20 net/socket.c:1568 [<ffffffff84512815>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84512815>] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae <...> Use mod_delayed_work() instead: if @connect_work is already scheduled, reschedule it, and undo sock_hold() to keep the reference count balanced. Reported-and-tested-by: syzbot+b03f55bf128f9a38f064@syzkaller.appspotmail.com Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Co-developed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-28Merge tag 'hyperv-next-signed-20220528' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Harden hv_sock driver (Andrea Parri) - Harden Hyper-V PCI driver (Andrea Parri) - Fix multi-MSI for Hyper-V PCI driver (Jeffrey Hugo) - Fix Hyper-V PCI to reduce boot time (Dexuan Cui) - Remove code for long EOL'ed Hyper-V versions (Michael Kelley, Saurabh Sengar) - Fix balloon driver error handling (Shradha Gupta) - Fix a typo in vmbus driver (Julia Lawall) - Ignore vmbus IMC device (Michael Kelley) - Add a new error message to Hyper-V DRM driver (Saurabh Sengar) * tag 'hyperv-next-signed-20220528' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (28 commits) hv_balloon: Fix balloon_probe() and balloon_remove() error handling scsi: storvsc: Removing Pre Win8 related logic Drivers: hv: vmbus: fix typo in comment PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit() PCI: hv: Add validation for untrusted Hyper-V values PCI: hv: Fix interrupt mapping for multi-MSI PCI: hv: Reuse existing IRTE allocation in compose_msi_msg() drm/hyperv: Remove support for Hyper-V 2008 and 2008R2/Win7 video: hyperv_fb: Remove support for Hyper-V 2008 and 2008R2/Win7 scsi: storvsc: Remove support for Hyper-V 2008 and 2008R2/Win7 Drivers: hv: vmbus: Remove support for Hyper-V 2008 and Hyper-V 2008R2/Win7 x86/hyperv: Disable hardlockup detector by default in Hyper-V guests drm/hyperv: Add error message for fb size greater than allocated PCI: hv: Do not set PCI_COMMAND_MEMORY to reduce VM boot time PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI Drivers: hv: vmbus: Refactor the ring-buffer iterator functions Drivers: hv: vmbus: Accept hv_sock offers in isolated guests hv_sock: Add validation for untrusted Hyper-V values hv_sock: Copy packets sent by Hyper-V out of the ring buffer hv_sock: Check hv_pkt_iter_first_raw()'s return value ...
2022-05-02vsock/virtio: add support for device suspend/resumeStefano Garzarella
Implement .freeze and .restore callbacks of struct virtio_driver to support device suspend/resume. During suspension all connected sockets are reset and VQs deleted. During resume the VQs are re-initialized. Reported by: Vilas R K <vilas.r.k@intel.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-02vsock/virtio: factor our the code to initialize and delete VQsStefano Garzarella
Add virtio_vsock_vqs_init() and virtio_vsock_vqs_del() with the code that was in virtio_vsock_probe() and virtio_vsock_remove to initialize and delete VQs. These new functions will be used in the next commit to support device suspend/resume Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28hv_sock: Add validation for untrusted Hyper-V valuesAndrea Parri (Microsoft)
For additional robustness in the face of Hyper-V errors or malicious behavior, validate all values that originate from packets that Hyper-V has sent to the guest in the host-to-guest ring buffer. Ensure that invalid values cannot cause data being copied out of the bounds of the source buffer in hvs_stream_dequeue(). Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220428145107.7878-4-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-04-28hv_sock: Copy packets sent by Hyper-V out of the ring bufferAndrea Parri (Microsoft)
Pointers to VMbus packets sent by Hyper-V are used by the hv_sock driver within the guest VM. Hyper-V can send packets with erroneous values or modify packet fields after they are processed by the guest. To defend against these scenarios, copy the incoming packet after validating its length and offset fields using hv_pkt_iter_{first,next}(). Use HVS_PKT_LEN(HVS_MTU_SIZE) to initialize the buffer which holds the copies of the incoming packets. In this way, the packet can no longer be modified by the host. Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220428145107.7878-3-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-04-28hv_sock: Check hv_pkt_iter_first_raw()'s return valueAndrea Parri (Microsoft)
The function returns NULL if the ring buffer doesn't contain enough readable bytes to constitute a packet descriptor. The ring buffer's write_index is in memory which is shared with the Hyper-V host, an erroneous or malicious host could thus change its value and overturn the result of hvs_stream_has_data(). Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220428145107.7878-2-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org>
2022-04-06net: remove noblock parameter from skb_recv_datagram()Oliver Hartkopp
skb_recv_datagram() has two parameters 'flags' and 'noblock' that are merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)' As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags' into 'flags' and 'noblock' with finally obsolete bit operations like this: skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc); And this is not even done consistently with the 'flags' parameter. This patch removes the obsolete and costly splitting into two parameters and only performs bit operations when really needed on the caller side. One missing conversion thankfully reported by kernel test robot. I missed to enable kunit tests to build the mctp code. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-24vsock/virtio: enable VQs early on probeStefano Garzarella
virtio spec requires drivers to set DRIVER_OK before using VQs. This is set automatically after probe returns, but virtio-vsock driver uses VQs in the probe function to fill rx and event VQs with new buffers. Let's fix this, calling virtio_device_ready() before using VQs in the probe function. Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-24vsock/virtio: read the negotiated features before using VQsStefano Garzarella
Complete the driver configuration, reading the negotiated features, before using the VQs in the virtio_vsock_probe(). Fixes: 53efbba12cc7 ("virtio/vsock: enable SEQPACKET for transport") Suggested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-24vsock/virtio: initialize vdev->priv before using VQsStefano Garzarella
When we fill VQs with empty buffers and kick the host, it may send an interrupt. `vdev->priv` must be initialized before this since it is used in the virtqueue callbacks. Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock") Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-11vsock: each transport cycles only on its own socketsJiyong Park
When iterating over sockets using vsock_for_each_connected_socket, make sure that a transport filters out sockets that don't belong to the transport. There actually was an issue caused by this; in a nested VM configuration, destroying the nested VM (which often involves the closing of /dev/vhost-vsock if there was h2g connections to the nested VM) kills not only the h2g connections, but also all existing g2h connections to the (outmost) host which are totally unrelated. Tested: Executed the following steps on Cuttlefish (Android running on a VM) [1]: (1) Enter into an `adb shell` session - to have a g2h connection inside the VM, (2) open and then close /dev/vhost-vsock by `exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb session is not reset. [1] https://android.googlesource.com/device/google/cuttlefish/ Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jiyong Park <jiyong@google.com> Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17vsock: remove vsock from connected table when connect is interrupted by a signalSeth Forshee
vsock_connect() expects that the socket could already be in the TCP_ESTABLISHED state when the connecting task wakes up with a signal pending. If this happens the socket will be in the connected table, and it is not removed when the socket state is reset. In this situation it's common for the process to retry connect(), and if the connection is successful the socket will be added to the connected table a second time, corrupting the list. Prevent this by calling vsock_remove_connected() if a signal is received while waiting for a connection. This is harmless if the socket is not in the connected table, and if it is in the table then removing it will prevent list corruption from a double add. Note for backporting: this patch requires d5afa82c977e ("vsock: correct removal of socket from the list"), which is in all current stable trees except 4.9.y. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Seth Forshee <sforshee@digitalocean.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20220217141312.2297547-1-sforshee@digitalocean.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
2022-01-14virtio: wrap config->reset callsMichael S. Tsirkin
This will enable cleanups down the road. The idea is to disable cbs, then add "flush_queued_cbs" callback as a parameter, this way drivers can flush any work queued after callbacks have been disabled. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29net: Don't include filter.h from net/sock.hJakub Kicinski
sock.h is pretty heavily used (5k objects rebuilt on x86 after it's touched). We can drop the include of filter.h from it and add a forward declaration of struct sk_filter instead. This decreases the number of rebuilt objects when bpf.h is touched from ~5k to ~1k. There's a lot of missing includes this was masking. Primarily in networking tho, this time. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
2021-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-08virtio/vsock: fix the transport to work with VMADDR_CID_ANYWei Wang
The VMADDR_CID_ANY flag used by a socket means that the socket isn't bound to any specific CID. For example, a host vsock server may want to be bound with VMADDR_CID_ANY, so that a guest vsock client can connect to the host server with CID=VMADDR_CID_HOST (i.e. 2), and meanwhile, a host vsock client can connect to the same local server with CID=VMADDR_CID_LOCAL (i.e. 1). The current implementation sets the destination socket's svm_cid to a fixed CID value after the first client's connection, which isn't an expected operation. For example, if the guest client first connects to the host server, the server's svm_cid gets set to VMADDR_CID_HOST, then other host clients won't be able to connect to the server anymore. Reproduce steps: 1. Run the host server: socat VSOCK-LISTEN:1234,fork - 2. Run a guest client to connect to the host server: socat - VSOCK-CONNECT:2:1234 3. Run a host client to connect to the host server: socat - VSOCK-CONNECT:1:1234 Without this patch, step 3. above fails to connect, and socat complains "socat[1720] E connect(5, AF=40 cid:1 port:1234, 16): Connection reset by peer". With this patch, the above works well. Fixes: c0cfa2d8a788 ("vsock: add multi-transports support") Signed-off-by: Wei Wang <wei.w.wang@intel.com> Link: https://lore.kernel.org/r/20211126011823.1760-1-wei.w.wang@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-12-07hv_sock: Extract hvs_send_data() helper that takes only headerKees Cook
When building under -Warray-bounds, the compiler is especially conservative when faced with casts from a smaller object to a larger object. While this has found many real bugs, there are some cases that are currently false positives (like here). With this as one of the last few instances of the warning in the kernel before -Warray-bounds can be enabled globally, rearrange the functions so that there is a header-only version of hvs_send_data(). Silences this warning: net/vmw_vsock/hyperv_transport.c: In function 'hvs_shutdown_lock_held.constprop': net/vmw_vsock/hyperv_transport.c:231:32: warning: array subscript 'struct hvs_send_buf[0]' is partly outside array bounds of 'struct vmpipe_proto_header[1]' [-Warray-bounds] 231 | send_buf->hdr.pkt_type = 1; | ~~~~~~~~~~~~~~~~~~~~~~~^~~ net/vmw_vsock/hyperv_transport.c:465:36: note: while referencing 'hdr' 465 | struct vmpipe_proto_header hdr; | ^~~ This change results in no executable instruction differences. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20211207063217.2591451-1-keescook@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-10vsock: prevent unnecessary refcnt inc for nonblocking connectEiichi Tsukata
Currently vosck_connect() increments sock refcount for nonblocking socket each time it's called, which can lead to memory leak if it's called multiple times because connect timeout function decrements sock refcount only once. Fixes it by making vsock_connect() return -EALREADY immediately when sock state is already SS_CONNECTING. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08vsock: Enable y2038 safe timeval for timeoutRichard Palethorpe
Reuse the timeval compat code from core/sock to handle 32-bit and 64-bit timeval structures. Also introduce a new socket option define to allow using y2038 safe timeval under 32-bit. The existing behavior of sock_set_timeout and vsock's timeout setter differ when the time value is out of bounds. vsocks current behavior is retained at the expense of not being able to share the full implementation. This allows the LTP test vsock01 to pass under 32-bit compat mode. Fixes: fe0c72f3db11 ("socket: move compat timeout handling into sock.c") Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> Cc: Richard Palethorpe <rpalethorpe@richiejp.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08vsock: Refactor vsock_*_getsockopt to resemble sock_getsockoptRichard Palethorpe
In preparation for sharing the implementation of sock_get_timeout. Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> Cc: Richard Palethorpe <rpalethorpe@richiejp.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06af_vsock: rename variables in receive loopArseny Krasnov
Record is supported via MSG_EOR flag, while current logic operates with message, so rename variables from 'record' to 'message'. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210903123306.3273757-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-05virtio/vsock: support MSG_EOR bit processingArseny Krasnov
If packet has 'EOR' bit - set MSG_EOR in 'recvmsg()' flags. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210903123251.3273639-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-09-05virtio/vsock: rename 'EOR' to 'EOM' bit.Arseny Krasnov
This current implemented bit is used to mark end of messages ('EOM' - end of message), not records('EOR' - end of record). Also rename 'record' to 'message' in implementation as it is different things. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210903123109.3273053-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-12vsock/virtio: avoid potential deadlock when vsock device removeLongpeng(Mike)
There's a potential deadlock case when remove the vsock device or process the RESET event: vsock_for_each_connected_socket: spin_lock_bh(&vsock_table_lock) ----------- (1) ... virtio_vsock_reset_sock: lock_sock(sk) --------------------- (2) ... spin_unlock_bh(&vsock_table_lock) lock_sock() may do initiative schedule when the 'sk' is owned by other thread at the same time, we would receivce a warning message that "scheduling while atomic". Even worse, if the next task (selected by the scheduler) try to release a 'sk', it need to request vsock_table_lock and the deadlock occur, cause the system into softlockup state. Call trace: queued_spin_lock_slowpath vsock_remove_bound vsock_remove_sock virtio_transport_release __vsock_release vsock_release __sock_release sock_close __fput ____fput So we should not require sk_lock in this case, just like the behavior in vhost_vsock or vmci. Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko") Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210812053056.1699-1-longpeng2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-03VSOCK: handle VIRTIO_VSOCK_OP_CREDIT_REQUESTHarshavardhan Unnibhavi
The original implementation of the virtio-vsock driver does not handle a VIRTIO_VSOCK_OP_CREDIT_REQUEST as required by the virtio-vsock specification. The vsock device emulated by vhost-vsock and the virtio-vsock driver never uses this request, which was probably why nobody noticed it. However, another implementation of the device may use this request type. Hence, this commit introduces a way to handle an explicit credit request by responding with a corresponding credit update as required by the virtio-vsock specification. Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Signed-off-by: Harshavardhan Unnibhavi <harshanavkis@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210802173506.2383-1-harshanavkis@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-04 08:37:33 +0000