summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2023-04-06Merge tag 'net-6.3-rc6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and can. Current release - regressions: - wifi: mac80211: - fix potential null pointer dereference - fix receiving mesh packets in forwarding=0 networks - fix mesh forwarding Current release - new code bugs: - virtio/vsock: fix leaks due to missing skb owner Previous releases - regressions: - raw: fix NULL deref in raw_get_next(). - sctp: check send stream number after wait_for_sndbuf - qrtr: - fix a refcount bug in qrtr_recvmsg() - do not do DEL_SERVER broadcast after DEL_CLIENT - wifi: brcmfmac: fix SDIO suspend/resume regression - wifi: mt76: fix use-after-free in fw features query. - can: fix race between isotp_sendsmg() and isotp_release() - eth: mtk_eth_soc: fix remaining throughput regression - eth: ice: reset FDIR counter in FDIR init stage Previous releases - always broken: - core: don't let netpoll invoke NAPI if in xmit context - icmp: guard against too small mtu - ipv6: fix an uninit variable access bug in __ip6_make_skb() - wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap() - can: fix poll() to not report false EPOLLOUT events - eth: gve: secure enough bytes in the first TX desc for all TCP pkts" * tag 'net-6.3-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits) net: stmmac: check fwnode for phy device before scanning for phy net: stmmac: Add queue reset into stmmac_xdp_open() function selftests: net: rps_default_mask.sh: delete veth link specifically net: fec: make use of MDIO C45 quirk can: isotp: fix race between isotp_sendsmg() and isotp_release() can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access gve: Secure enough bytes in the first TX desc for all TCP pkts netlink: annotate lockless accesses to nlk->max_recvmsg_len ethtool: reset #lanes when lanes is omitted ping: Fix potentail NULL deref for /proc/net/icmp. raw: Fix NULL deref in raw_get_next(). ice: Reset FDIR counter in FDIR init stage ice: fix wrong fallback logic for FDIR net: stmmac: fix up RX flow hash indirection table when setting channels net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probe wifi: mt76: ignore key disable commands wifi: ath11k: reduce the MHI timeout to 20s ipv6: Fix an uninit variable access bug in __ip6_make_skb() ...
2023-04-05can: isotp: fix race between isotp_sendsmg() and isotp_release()Oliver Hartkopp
As discussed with Dae R. Jeong and Hillf Danton here [1] the sendmsg() function in isotp.c might get into a race condition when restoring the former tx.state from the old_state. Remove the old_state concept and implement proper locking for the ISOTP_IDLE transitions in isotp_sendmsg(), inspired by a simplification idea from Hillf Danton. Introduce a new tx.state ISOTP_SHUTDOWN and use the same locking mechanism from isotp_release() which resolves a potential race between isotp_sendsmg() and isotp_release(). [1] https://lore.kernel.org/linux-can/ZB%2F93xJxq%2FBUqAgG@dragonet v1: https://lore.kernel.org/all/20230331102114.15164-1-socketcan@hartkopp.net v2: https://lore.kernel.org/all/20230331123600.3550-1-socketcan@hartkopp.net take care of signal interrupts for wait_event_interruptible() in isotp_release() v3: https://lore.kernel.org/all/20230331130654.9886-1-socketcan@hartkopp.net take care of signal interrupts for wait_event_interruptible() in isotp_sendmsg() in the wait_tx_done case v4: https://lore.kernel.org/all/20230331131935.21465-1-socketcan@hartkopp.net take care of signal interrupts for wait_event_interruptible() in isotp_sendmsg() in ALL cases Cc: Dae R. Jeong <threeearcat@gmail.com> Cc: Hillf Danton <hdanton@sina.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: 4f027cba8216 ("can: isotp: split tx timer into transmission and timeout") Link: https://lore.kernel.org/all/20230331131935.21465-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org [mkl: rephrase commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-04-05can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT eventsMichal Sojka
When using select()/poll()/epoll() with a non-blocking ISOTP socket to wait for when non-blocking write is possible, a false EPOLLOUT event is sometimes returned. This can happen at least after sending a message which must be split to multiple CAN frames. The reason is that isotp_sendmsg() returns -EAGAIN when tx.state is not equal to ISOTP_IDLE and this behavior is not reflected in datagram_poll(), which is used in isotp_ops. This is fixed by introducing ISOTP-specific poll function, which suppresses the EPOLLOUT events in that case. v2: https://lore.kernel.org/all/20230302092812.320643-1-michal.sojka@cvut.cz v1: https://lore.kernel.org/all/20230224010659.48420-1-michal.sojka@cvut.cz https://lore.kernel.org/all/b53a04a2-ba1f-3858-84c1-d3eb3301ae15@hartkopp.net Signed-off-by: Michal Sojka <michal.sojka@cvut.cz> Reported-by: Jakub Jira <jirajak2@fel.cvut.cz> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/20230331125511.372783-1-michal.sojka@cvut.cz Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-04-05can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infosOliver Hartkopp
isotp.c was still using sock_recv_timestamp() which does not provide control messages to detect dropped PDUs in the receive path. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230330170248.62342-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-04-05can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory accessOleksij Rempel
In the j1939_tp_tx_dat_new() function, an out-of-bounds memory access could occur during the memcpy() operation if the size of skb->cb is larger than the size of struct j1939_sk_buff_cb. This is because the memcpy() operation uses the size of skb->cb, leading to a read beyond the struct j1939_sk_buff_cb. Updated the memcpy() operation to use the size of struct j1939_sk_buff_cb instead of the size of skb->cb. This ensures that the memcpy() operation only reads the memory within the bounds of struct j1939_sk_buff_cb, preventing out-of-bounds memory access. Additionally, add a BUILD_BUG_ON() to check that the size of skb->cb is greater than or equal to the size of struct j1939_sk_buff_cb. This ensures that the skb->cb buffer is large enough to hold the j1939_sk_buff_cb structure. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-by: Shuangpeng Bai <sjb7183@psu.edu> Tested-by: Shuangpeng Bai <sjb7183@psu.edu> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://groups.google.com/g/syzkaller/c/G_LL-C3plRs/m/-8xCi6dCAgAJ Link: https://lore.kernel.org/all/20230404073128.3173900-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org [mkl: rephrase commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-04-04netlink: annotate lockless accesses to nlk->max_recvmsg_lenEric Dumazet
syzbot reported a data-race in data-race in netlink_recvmsg() [1] Indeed, netlink_recvmsg() can be run concurrently, and netlink_dump() also needs protection. [1] BUG: KCSAN: data-race in netlink_recvmsg / netlink_recvmsg read to 0xffff888141840b38 of 8 bytes by task 23057 on cpu 0: netlink_recvmsg+0xea/0x730 net/netlink/af_netlink.c:1988 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg net/socket.c:1038 [inline] __sys_recvfrom+0x1ee/0x2e0 net/socket.c:2194 __do_sys_recvfrom net/socket.c:2212 [inline] __se_sys_recvfrom net/socket.c:2208 [inline] __x64_sys_recvfrom+0x78/0x90 net/socket.c:2208 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffff888141840b38 of 8 bytes by task 23037 on cpu 1: netlink_recvmsg+0x114/0x730 net/netlink/af_netlink.c:1989 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg net/socket.c:1038 [inline] ____sys_recvmsg+0x156/0x310 net/socket.c:2720 ___sys_recvmsg net/socket.c:2762 [inline] do_recvmmsg+0x2e5/0x710 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0x0000000000001000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 23037 Comm: syz-executor.2 Not tainted 6.3.0-rc4-syzkaller-00195-g5a57b48fdfcb #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 Fixes: 9063e21fb026 ("netlink: autosize skb lengthes") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230403214643.768555-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-04ethtool: reset #lanes when lanes is omittedAndy Roulin
If the number of lanes was forced and then subsequently the user omits this parameter, the ksettings->lanes is reset. The driver should then reset the number of lanes to the device's default for the specified speed. However, although the ksettings->lanes is set to 0, the mod variable is not set to true to indicate the driver and userspace should be notified of the changes. The consequence is that the same ethtool operation will produce different results based on the initial state. If the initial state is: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: on then executing 'ethtool -s swp1 speed 50000 autoneg off' will yield: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: off While if the initial state is: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 1 Duplex: Full Auto-negotiation: off executing the same 'ethtool -s swp1 speed 50000 autoneg off' results in: $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 1 Duplex: Full Auto-negotiation: off This patch fixes this behavior. Omitting lanes will always results in the driver choosing the default lane width for the chosen speed. In this scenario, regardless of the initial state, the end state will be, e.g., $ ethtool swp1 | grep -A 3 'Speed: ' Speed: 500000Mb/s Lanes: 2 Duplex: Full Auto-negotiation: off Fixes: 012ce4dd3102 ("ethtool: Extend link modes settings uAPI with lanes") Signed-off-by: Andy Roulin <aroulin@nvidia.com> Reviewed-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/ac238d6b-8726-8156-3810-6471291dbc7f@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-04ping: Fix potentail NULL deref for /proc/net/icmp.Kuniyuki Iwashima
After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock"), we use RCU for ping sockets, but we should use spinlock for /proc/net/icmp to avoid a potential NULL deref mentioned in the previous patch. Let's go back to using spinlock there. Note we can convert ping sockets to use hlist instead of hlist_nulls because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. Fixes: dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-04raw: Fix NULL deref in raw_get_next().Kuniyuki Iwashima
Dae R. Jeong reported a NULL deref in raw_get_next() [0]. It seems that the repro was running these sequences in parallel so that one thread was iterating on a socket that was being freed in another netns. unshare(0x40060200) r0 = syz_open_procfs(0x0, &(0x7f0000002080)='net/raw\x00') socket$inet_icmp_raw(0x2, 0x3, 0x1) pread64(r0, &(0x7f0000000000)=""/10, 0xa, 0x10000000007f) After commit 0daf07e52709 ("raw: convert raw sockets to RCU"), we use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW sockets. However, we should use spinlock for slow paths to avoid the NULL deref. Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object is not reused during iteration in the grace period. In fact, the lockless readers do not check the nulls marker with get_nulls_value(). So, SOCK_RAW should use hlist instead of hlist_nulls. Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(), let's convert hlist_nulls to hlist and use sk_for_each_rcu() for fast paths and sk_for_each() and spinlock for /proc/net/raw. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 2 PID: 20952 Comm: syz-executor.0 Not tainted 6.2.0-g048ec869bafd-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline] RIP: 0010:sock_net include/net/sock.h:649 [inline] RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline] RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline] RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995 Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206 RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000 RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338 RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9 R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78 R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030 FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb9614b35f CR3: 000000003c672000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> seq_read_iter+0x4c6/0x10f0 fs/seq_file.c:225 seq_read+0x224/0x320 fs/seq_file.c:162 pde_read fs/proc/inode.c:316 [inline] proc_reg_read+0x23f/0x330 fs/proc/inode.c:328 vfs_read+0x31e/0xd30 fs/read_write.c:468 ksys_pread64 fs/read_write.c:665 [inline] __do_sys_pread64 fs/read_write.c:675 [inline] __se_sys_pread64 fs/read_write.c:672 [inline] __x64_sys_pread64+0x1e9/0x280 fs/read_write.c:672 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x478d29 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f843ae8dbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011 RAX: ffffffffffffffda RBX: 0000000000791408 RCX: 0000000000478d29 RDX: 000000000000000a RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000f477909a R08: 0000000000000000 R09: 0000000000000000 R10: 000010000000007f R11: 0000000000000246 R12: 0000000000791740 R13: 0000000000791414 R14: 0000000000791408 R15: 00007ffc2eb48a50 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline] RIP: 0010:sock_net include/net/sock.h:649 [inline] RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline] RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline] RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995 Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206 RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000 RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338 RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9 R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78 R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030 FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f92ff166000 CR3: 000000003c672000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 0daf07e52709 ("raw: convert raw sockets to RCU") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Dae R. Jeong <threeearcat@gmail.com> Link: https://lore.kernel.org/netdev/ZCA2mGV_cmq7lIfV@dragonet/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-04Merge tag 'nfsd-6.3-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Fix a crash and a resource leak in NFSv4 COMPOUND processing - Fix issues with AUTH_SYS credential handling - Try again to address an NFS/NFSD/SUNRPC build dependency regression * tag 'nfsd-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: callback request does not use correct credential for AUTH_SYS NFS: Remove "select RPCSEC_GSS_KRB5 sunrpc: only free unix grouplist after RCU settles nfsd: call op_release, even when op_func returns an error NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
2023-04-04sunrpc: only free unix grouplist after RCU settlesJeff Layton
While the unix_gid object is rcu-freed, the group_info list that it contains is not. Ensure that we only put the group list reference once we are really freeing the unix_gid object. Reported-by: Zhi Li <yieli@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2183056 Signed-off-by: Jeff Layton <jlayton@kernel.org> Fixes: fd5d2f78261b ("SUNRPC: Make server side AUTH_UNIX use lockless lookups") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-04-03ipv6: Fix an uninit variable access bug in __ip6_make_skb()Ziyang Xuan
Syzbot reported a bug as following: ===================================================== BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 ip6_finish_skb include/net/ipv6.h:1122 [inline] ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987 rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579 rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988 kmalloc_reserve net/core/skbuff.c:492 [inline] __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565 alloc_skb include/linux/skbuff.h:1270 [inline] __ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684 ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854 rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because icmp6hdr does not in skb linear region under the scenario of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will trigger the uninit variable access bug. Use a local variable icmp6_type to carry the correct value in different scenarios. Fixes: 14878f75abd5 ("[IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]") Reported-by: syzbot+8257f4dcef79de670baf@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=3d605ec1d0a7f2a269a1a6936ac7f2b85975ee9c Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-03net: qrtr: Do not do DEL_SERVER broadcast after DEL_CLIENTSricharan Ramabadhran
On the remote side, when QRTR socket is removed, af_qrtr will call qrtr_port_remove() which broadcasts the DEL_CLIENT packet to all neighbours including local NS. NS upon receiving the DEL_CLIENT packet, will remove the lookups associated with the node:port and broadcasts the DEL_SERVER packet. But on the host side, due to the arrival of the DEL_CLIENT packet, the NS would've already deleted the server belonging to that port. So when the remote's NS again broadcasts the DEL_SERVER for that port, it throws below error message on the host: "failed while handling packet from 2:-2" So fix this error by not broadcasting the DEL_SERVER packet when the DEL_CLIENT packet gets processed." Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace") Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Ram Kumar Dharuman <quic_ramd@quicinc.com> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02sctp: check send stream number after wait_for_sndbufXin Long
This patch fixes a corner case where the asoc out stream count may change after wait_for_sndbuf. When the main thread in the client starts a connection, if its out stream count is set to N while the in stream count in the server is set to N - 2, another thread in the client keeps sending the msgs with stream number N - 1, and waits for sndbuf before processing INIT_ACK. However, after processing INIT_ACK, the out stream count in the client is shrunk to N - 2, the same to the in stream count in the server. The crash occurs when the thread waiting for sndbuf is awake and sends the msg in a non-existing stream(N - 1), the call trace is as below: KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f] Call Trace: <TASK> sctp_cmd_send_msg net/sctp/sm_sideeffect.c:1114 [inline] sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1777 [inline] sctp_side_effects net/sctp/sm_sideeffect.c:1199 [inline] sctp_do_sm+0x197d/0x5310 net/sctp/sm_sideeffect.c:1170 sctp_primitive_SEND+0x9f/0xc0 net/sctp/primitive.c:163 sctp_sendmsg_to_asoc+0x10eb/0x1a30 net/sctp/socket.c:1868 sctp_sendmsg+0x8d4/0x1d90 net/sctp/socket.c:2026 inet_sendmsg+0x9d/0xe0 net/ipv4/af_inet.c:825 sock_sendmsg_nosec net/socket.c:722 [inline] sock_sendmsg+0xde/0x190 net/socket.c:745 The fix is to add an unlikely check for the send stream number after the thread wakes up from the wait_for_sndbuf. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+47c24ca20a2fa01f082e@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-02net: don't let netpoll invoke NAPI if in xmit contextJakub Kicinski
Commit 0db3dc73f7a3 ("[NETPOLL]: tx lock deadlock fix") narrowed down the region under netif_tx_trylock() inside netpoll_send_skb(). (At that point in time netif_tx_trylock() would lock all queues of the device.) Taking the tx lock was problematic because driver's cleanup method may take the same lock. So the change made us hold the xmit lock only around xmit, and expected the driver to take care of locking within ->ndo_poll_controller(). Unfortunately this only works if netpoll isn't itself called with the xmit lock already held. Netpoll code is careful and uses trylock(). The drivers, however, may be using plain lock(). Printing while holding the xmit lock is going to result in rare deadlocks. Luckily we record the xmit lock owners, so we can scan all the queues, the same way we scan NAPI owners. If any of the xmit locks is held by the local CPU we better not attempt any polling. It would be nice if we could narrow down the check to only the NAPIs and the queue we're trying to use. I don't see a way to do that now. Reported-by: Roman Gushchin <roman.gushchin@linux.dev> Fixes: 0db3dc73f7a3 ("[NETPOLL]: tx lock deadlock fix") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-31icmp: guard against too small mtuEric Dumazet
syzbot was able to trigger a panic [1] in icmp_glue_bits(), or more exactly in skb_copy_and_csum_bits() There is no repro yet, but I think the issue is that syzbot manages to lower device mtu to a small value, fooling __icmp_send() __icmp_send() must make sure there is enough room for the packet to include at least the headers. We might in the future refactor skb_copy_and_csum_bits() and its callers to no longer crash when something bad happens. [1] kernel BUG at net/core/skbuff.c:3343 ! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 15766 Comm: syz-executor.0 Not tainted 6.3.0-rc4-syzkaller-00039-gffe78bbd5121 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_copy_and_csum_bits+0x798/0x860 net/core/skbuff.c:3343 Code: f0 c1 c8 08 41 89 c6 e9 73 ff ff ff e8 61 48 d4 f9 e9 41 fd ff ff 48 8b 7c 24 48 e8 52 48 d4 f9 e9 c3 fc ff ff e8 c8 27 84 f9 <0f> 0b 48 89 44 24 28 e8 3c 48 d4 f9 48 8b 44 24 28 e9 9d fb ff ff RSP: 0018:ffffc90000007620 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000000001e8 RCX: 0000000000000100 RDX: ffff8880276f6280 RSI: ffffffff87fdd138 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000000001e8 R11: 0000000000000001 R12: 000000000000003c R13: 0000000000000000 R14: ffff888028244868 R15: 0000000000000b0e FS: 00007fbc81f1c700(0000) GS:ffff88802ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2df43000 CR3: 00000000744db000 CR4: 0000000000150ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> icmp_glue_bits+0x7b/0x210 net/ipv4/icmp.c:353 __ip_append_data+0x1d1b/0x39f0 net/ipv4/ip_output.c:1161 ip_append_data net/ipv4/ip_output.c:1343 [inline] ip_append_data+0x115/0x1a0 net/ipv4/ip_output.c:1322 icmp_push_reply+0xa8/0x440 net/ipv4/icmp.c:370 __icmp_send+0xb80/0x1430 net/ipv4/icmp.c:765 ipv4_send_dest_unreach net/ipv4/route.c:1239 [inline] ipv4_link_failure+0x5a9/0x9e0 net/ipv4/route.c:1246 dst_link_failure include/net/dst.h:423 [inline] arp_error_report+0xcb/0x1c0 net/ipv4/arp.c:296 neigh_invalidate+0x20d/0x560 net/core/neighbour.c:1079 neigh_timer_handler+0xc77/0xff0 net/core/neighbour.c:1166 call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700 expire_timers+0x29b/0x4b0 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+d373d60fddbdc915e666@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230330174502.1915328-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-31Merge tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client fixes from Anna Schumaker: - Fix shutdown of NFS TCP client sockets - Fix hangs when recovering open state after a server reboot * tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: SUNRPC: fix shutdown of NFS TCP client socket NFSv4: Fix hangs when recovering open state after a server reboot
2023-03-31vsock/vmci: convert VMCI error code to -ENOMEM on sendArseniy Krasnov
This adds conversion of VMCI specific error code to general -ENOMEM. It is needed, because af_vsock.c passes error value returned from transport to the user, which does not expect to get VMCI_ERROR_* values. Fixes: c43170b7e157 ("vsock: return errors other than -ENOMEM to socket") Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-31l2tp: generate correct module alias stringsAndrea Righi
Commit 65b32f801bfb ("uapi: move IPPROTO_L2TP to in.h") moved the definition of IPPROTO_L2TP from a define to an enum, but since __stringify doesn't work properly with enums, we ended up breaking the modalias strings for the l2tp modules: $ modinfo l2tp_ip l2tp_ip6 | grep alias alias: net-pf-2-proto-IPPROTO_L2TP alias: net-pf-2-proto-2-type-IPPROTO_L2TP alias: net-pf-10-proto-IPPROTO_L2TP alias: net-pf-10-proto-2-type-IPPROTO_L2TP Use the resolved number directly in MODULE_ALIAS_*() macros (as we already do with SOCK_DGRAM) to fix the alias strings: $ modinfo l2tp_ip l2tp_ip6 | grep alias alias: net-pf-2-proto-115 alias: net-pf-2-proto-115-type-2 alias: net-pf-10-proto-115 alias: net-pf-10-proto-115-type-2 Moreover, fix the ordering of the parameters passed to MODULE_ALIAS_NET_PF_PROTO_TYPE() by switching proto and type. Fixes: 65b32f801bfb ("uapi: move IPPROTO_L2TP to in.h") Link: https://lore.kernel.org/lkml/ZCQt7hmodtUaBlCP@righiandr-XPS-13-7390 Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-31net: qrtr: Fix a refcount bug in qrtr_recvmsg()Ziyang Xuan
Syzbot reported a bug as following: refcount_t: addition on 0; use-after-free. ... RIP: 0010:refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25 ... Call Trace: <TASK> __refcount_add include/linux/refcount.h:199 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] kref_get include/linux/kref.h:45 [inline] qrtr_node_acquire net/qrtr/af_qrtr.c:202 [inline] qrtr_node_lookup net/qrtr/af_qrtr.c:398 [inline] qrtr_send_resume_tx net/qrtr/af_qrtr.c:1003 [inline] qrtr_recvmsg+0x85f/0x990 net/qrtr/af_qrtr.c:1070 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1038 qrtr_ns_worker+0x170/0x1700 net/qrtr/ns.c:688 process_one_work+0x991/0x15c0 kernel/workqueue.c:2390 worker_thread+0x669/0x1090 kernel/workqueue.c:2537 It occurs in the concurrent scenario of qrtr_recvmsg() and qrtr_endpoint_unregister() as following: cpu0 cpu1 qrtr_recvmsg qrtr_endpoint_unregister qrtr_send_resume_tx qrtr_node_release qrtr_node_lookup mutex_lock(&qrtr_node_lock) spin_lock_irqsave(&qrtr_nodes_lock, ) refcount_dec_and_test(&node->ref) [node->ref == 0] radix_tree_lookup [node != NULL] __qrtr_node_release qrtr_node_acquire spin_lock_irqsave(&qrtr_nodes_lock, ) kref_get(&node->ref) [WARNING] ... mutex_unlock(&qrtr_node_lock) Use qrtr_node_lock to protect qrtr_node_lookup() implementation, this is actually improving the protection of node reference. Fixes: 0a7e0d0ef054 ("net: qrtr: Migrate node lookup tree to spinlock") Reported-by: syzbot+a7492efaa5d61b51db23@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=a7492efaa5d61b51db23 Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-31virtio/vsock: fix leaks due to missing skb ownerBobby Eshleman
This patch sets the skb owner in the recv and send path for virtio. For the send path, this solves the leak caused when virtio_transport_purge_skbs() finds skb->sk is always NULL and therefore never matches it with the current socket. Setting the owner upon allocation fixes this. For the recv path, this ensures correctness of accounting and also correct transfer of ownership in vsock_loopback (when skbs are sent from one socket and received by another). Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/all/ZCCbATwov4U+GBUv@pop-os.localdomain/ Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-30Merge tag 'wireless-2023-03-30' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Just a few fixes: * fix size calculation for EHT element to put into SKBs * remove erroneous pre-RCU calls for drivers not using sta_state calls * fix mesh forwarding and non-forwarding RX * fix mesh flow dissection * fix a potential NULL dereference on A-MSDU RX w/o station * make two variable non-static that really shouldn't be static * tag 'wireless-2023-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for non-uploaded sta wifi: mac80211: fix flow dissection for forwarded packets wifi: mac80211: fix mesh forwarding wifi: mac80211: fix receiving mesh packets in forwarding=0 networks wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap() wifi: mac80211: fix potential null pointer dereference wifi: mac80211: drop bogus static keywords in A-MSDU rx ==================== Link: https://lore.kernel.org/r/20230330203313.919164-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-30Merge tag 'net-6.3-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from CAN and WPAN. Still quite a few bugs from this release. This pull is a bit smaller because major subtrees went into the previous one. Or maybe people took spring break off? Current release - regressions: - phy: micrel: correct KSZ9131RNX EEE capabilities and advertisement Current release - new code bugs: - eth: wangxun: fix vector length of interrupt cause - vsock/loopback: consistently protect the packet queue with sk_buff_head.lock - virtio/vsock: fix header length on skb merging - wpan: ca8210: fix unsigned mac_len comparison with zero Previous releases - regressions: - eth: stmmac: don't reject VLANs when IFF_PROMISC is set - eth: smsc911x: avoid PHY being resumed when interface is not up - eth: mtk_eth_soc: fix tx throughput regression with direct 1G links - eth: bnx2x: use the right build_skb() helper after core rework - wwan: iosm: fix 7560 modem crash on use on unsupported channel Previous releases - always broken: - eth: sfc: don't overwrite offload features at NIC reset - eth: r8169: fix RTL8168H and RTL8107E rx crc error - can: j1939: prevent deadlock by moving j1939_sk_errqueue() - virt: vmxnet3: use GRO callback when UPT is enabled - virt: xen: don't do grant copy across page boundary - phy: dp83869: fix default value for tx-/rx-internal-delay - dsa: ksz8: fix multiple issues with ksz8_fdb_dump - eth: mvpp2: fix classification/RSS of VLAN and fragmented packets - eth: mtk_eth_soc: fix flow block refcounting logic Misc: - constify fwnode pointers in SFP handling" * tag 'net-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits) net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow net: ethernet: mtk_eth_soc: fix L2 offloading with DSA untag offload net: ethernet: mtk_eth_soc: fix flow block refcounting logic net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit() net: dsa: sync unicast and multicast addresses for VLAN filters too net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only xen/netback: use same error messages for same errors test/vsock: new skbuff appending test virtio/vsock: WARN_ONCE() for invalid state of socket virtio/vsock: fix header length on skb merging bnxt_en: Add missing 200G link speed reporting bnxt_en: Fix typo in PCI id to device description string mapping bnxt_en: Fix reporting of test result in ethtool selftest i40e: fix registers dump after run ethtool adapter self test bnx2x: use the right build_skb() helper net: ipa: compute DMA pool size properly net: wwan: iosm: fixes 7560 modem crash net: ethernet: mtk_eth_soc: fix tx throughput regression with direct 1G links ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg() ice: add profile conflict check for AVF FDIR ...
2023-03-30net: dsa: sync unicast and multicast addresses for VLAN filters tooVladimir Oltean
If certain conditions are met, DSA can install all necessary MAC addresses on the CPU ports as FDB entries and disable flooding towards the CPU (we call this RX filtering). There is one corner case where this does not work. ip link add br0 type bridge vlan_filtering 1 && ip link set br0 up ip link set swp0 master br0 && ip link set swp0 up ip link add link swp0 name swp0.100 type vlan id 100 ip link set swp0.100 up && ip addr add 192.168.100.1/24 dev swp0.100 Traffic through swp0.100 is broken, because the bridge turns on VLAN filtering in the swp0 port (causing RX packets to be classified to the FDB database corresponding to the VID from their 802.1Q header), and although the 8021q module does call dev_uc_add() towards the real device, that API is VLAN-unaware, so it only contains the MAC address, not the VID; and DSA's current implementation of ndo_set_rx_mode() is only for VID 0 (corresponding to FDB entries which are installed in an FDB database which is only hit when the port is VLAN-unaware). It's interesting to understand why the bridge does not turn on IFF_PROMISC for its swp0 bridge port, and it may appear at first glance that this is a regression caused by the logic in commit 2796d0c648c9 ("bridge: Automatically manage port promiscuous mode."). After all, a bridge port needs to have IFF_PROMISC by its very nature - it needs to receive and forward frames with a MAC DA different from the bridge ports' MAC addresses. While that may be true, when the bridge is VLAN-aware *and* it has a single port, there is no real reason to enable promiscuity even if that is an automatic port, with flooding and learning (there is nowhere for packets to go except to the BR_FDB_LOCAL entries), and this is how the corner case appears. Adding a second automatic interface to the bridge would make swp0 promisc as well, and would mask the corner case. Given the dev_uc_add() / ndo_set_rx_mode() API is what it is (it doesn't pass a VLAN ID), the only way to address that problem is to install host FDB entries for the cartesian product of RX filtering MAC addresses and VLAN RX filters. Fixes: 7569459a52c9 ("net: dsa: manage flooding on the CPU ports") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230329151821.745752-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-30wifi: mac80211: fix invalid drv_sta_pre_rcu_remove calls for non-uploaded staFelix Fietkau
Avoid potential data corruption issues caused by uninitialized driver private data structures. Reported-by: Brian Coverstone <brian@mainsequence.net> Fixes: 6a9d1b91f34d ("mac80211: add pre-RCU-sync sta removal driver operation") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230324120924.38412-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: mac80211: fix flow dissection for forwarded packetsFelix Fietkau
Adjust the network header to point at the correct payload offset Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230324120924.38412-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: mac80211: fix mesh forwardingFelix Fietkau
Linearize packets (needed for forwarding A-MSDU subframes). Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230324120924.38412-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: mac80211: fix receiving mesh packets in forwarding=0 networksFelix Fietkau
When forwarding is set to 0, frames are typically sent with ttl=1. Move the ttl decrement check below the check for local receive in order to fix packet drops. Reported-by: Thomas Hühn <thomas.huehn@hs-nordhausen.de> Reported-by: Nick Hainke <vincent@systemli.org> Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230326151709.17743-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: mac80211: fix the size calculation of ieee80211_ie_len_eht_cap()Ryder Lee
Here should return the size of ieee80211_eht_cap_elem_fixed, so fix it. Fixes: 820acc810fb6 ("mac80211: Add EHT capabilities to association/probe request") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/06c13635fc03bcff58a647b8e03e9f01a74294bd.1679935259.git.ryder.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: mac80211: fix potential null pointer dereferenceFelix Fietkau
rx->sta->amsdu_mesh_control is being passed to ieee80211_amsdu_to_8023s without checking rx->sta. Since it doesn't make sense to accept A-MSDU packets without a sta, simply add a check earlier. Fixes: 6e4c0d0460bd ("wifi: mac80211: add a workaround for receiving non-standard mesh A-MSDU") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230330090001.60750-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30wifi: mac80211: drop bogus static keywords in A-MSDU rxFelix Fietkau
These were unintentional copy&paste mistakes. Cc: stable@vger.kernel.org Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230330090001.60750-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-30virtio/vsock: WARN_ONCE() for invalid state of socketArseniy Krasnov
This adds WARN_ONCE() and return from stream dequeue callback when socket's queue is empty, but 'rx_bytes' still non-zero. This allows the detection of potential bugs due to packet merging (see previous patch). Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-30virtio/vsock: fix header length on skb mergingArseniy Krasnov
This fixes appending newly arrived skbuff to the last skbuff of the socket's queue. Problem fires when we are trying to append data to skbuff which was already processed in dequeue callback at least once. Dequeue callback calls function 'skb_pull()' which changes 'skb->len'. In current implementation 'skb->len' is used to update length in header of the last skbuff after new data was copied to it. This is bug, because value in header is used to calculate 'rx_bytes'/'fwd_cnt' and thus must be not be changed during skbuff's lifetime. Bug starts to fire since: commit 077706165717 ("virtio/vsock: don't use skbuff state to account credit") It presents before, but didn't triggered due to a little bit buggy implementation of credit calculation logic. So use Fixes tag for it. Fixes: 077706165717 ("virtio/vsock: don't use skbuff state to account credit") Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-29Merge tag 'ieee802154-for-net-2023-03-29' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== ieee802154 for net 2023-03-29 Two small fixes this time. Dongliang Mu removed an unnecessary null pointer check. Harshit Mogalapalli fixed an int comparison unsigned against signed from a recent other fix in the ca8210 driver. * tag 'ieee802154-for-net-2023-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan: net: ieee802154: remove an unnecessary null pointer check ca8210: Fix unsigned mac_len comparison with zero in ca8210_skb_tx() ==================== Link: https://lore.kernel.org/r/20230329064541.2147400-1-stefan@datenfreihafen.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-27can: bcm: bcm_tx_setup(): fix KMSAN uninit-value in vfs_writeIvan Orlov
Syzkaller reported the following issue: ===================================================== BUG: KMSAN: uninit-value in aio_rw_done fs/aio.c:1520 [inline] BUG: KMSAN: uninit-value in aio_write+0x899/0x950 fs/aio.c:1600 aio_rw_done fs/aio.c:1520 [inline] aio_write+0x899/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc+0x11d/0x3b0 mm/slab_common.c:981 kmalloc_array include/linux/slab.h:636 [inline] bcm_tx_setup+0x80e/0x29d0 net/can/bcm.c:930 bcm_sendmsg+0x3a2/0xce0 net/can/bcm.c:1351 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] sock_write_iter+0x495/0x5e0 net/socket.c:1108 call_write_iter include/linux/fs.h:2189 [inline] aio_write+0x63a/0x950 fs/aio.c:1600 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019 __do_sys_io_submit fs/aio.c:2078 [inline] __se_sys_io_submit+0x293/0x770 fs/aio.c:2048 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 1 PID: 5034 Comm: syz-executor350 Not tainted 6.2.0-rc6-syzkaller-80422-geda666ff2276 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 ===================================================== We can follow the call chain and find that 'bcm_tx_setup' function calls 'memcpy_from_msg' to copy some content to the newly allocated frame of 'op->frames'. After that the 'len' field of copied structure being compared with some constant value (64 or 8). However, if 'memcpy_from_msg' returns an error, we will compare some uninitialized memory. This triggers 'uninit-value' issue. This patch will add 'memcpy_from_msg' possible errors processing to avoid uninit-value issue. Tested via syzkaller Reported-by: syzbot+c9bfd85eca611ebf5db1@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=47f897f8ad958bbde5790ebf389b5e7e0a345089 Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com> Fixes: 6f3b911d5f29b ("can: bcm: add support for CAN FD frames") Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20230314120445.12407-1-ivan.orlov0322@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-27can: j1939: prevent deadlock by moving j1939_sk_errqueue()Oleksij Rempel
This commit addresses a deadlock situation that can occur in certain scenarios, such as when running data TP/ETP transfer and subscribing to the error queue while receiving a net down event. The deadlock involves locks in the following order: 3 j1939_session_list_lock -> active_session_list_lock j1939_session_activate ... j1939_sk_queue_activate_next -> sk_session_queue_lock ... j1939_xtp_rx_eoma_one 2 j1939_sk_queue_drop_all -> sk_session_queue_lock ... j1939_sk_netdev_event_netdown -> j1939_socks_lock j1939_netdev_notify 1 j1939_sk_errqueue -> j1939_socks_lock __j1939_session_cancel -> active_session_list_lock j1939_tp_rxtimer CPU0 CPU1 ---- ---- lock(&priv->active_session_list_lock); lock(&jsk->sk_session_queue_lock); lock(&priv->active_session_list_lock); lock(&priv->j1939_socks_lock); The solution implemented in this commit is to move the j1939_sk_errqueue() call out of the active_session_list_lock context, thus preventing the deadlock situation. Reported-by: syzbot+ee1cd780f69483a8616b@syzkaller.appspotmail.com Fixes: 5b9272e93f2e ("can: j1939: extend UAPI to notify about RX status") Co-developed-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20230324130141.2132787-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2023-03-27vsock/loopback: use only sk_buff_head.lock to protect the packet queueStefano Garzarella
pkt_list_lock was used before commit 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") to protect the packet queue. After that commit we switched to sk_buff and we are using sk_buff_head.lock in almost every place to protect the packet queue except in vsock_loopback_work() when we call skb_queue_splice_init(). As reported by syzbot, this caused unlocked concurrent access to the packet queue between vsock_loopback_work() and vsock_loopback_cancel_pkt() since it is not holding pkt_list_lock. With the introduction of sk_buff_head, pkt_list_lock is redundant and can cause confusion, so let's remove it and use sk_buff_head.lock everywhere to protect the packet queue access. Fixes: 71dc9ec9ac7d ("virtio/vsock: replace virtio_vsock_pkt with sk_buff") Cc: bobby.eshleman@bytedance.com Reported-and-tested-by: syzbot+befff0a9536049e7902e@syzkaller.appspotmail.com Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Bobby Eshleman <bobby.eshleman@bytedance.com> Reviewed-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-25Merge tag 'nfsd-6.3-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fix from Chuck Lever: - Fix a crash when using NFS with krb5p * tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix a crash in gss_krb5_checksum()
2023-03-23Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-03-23 We've added 8 non-merge commits during the last 13 day(s) which contain a total of 21 files changed, 238 insertions(+), 161 deletions(-). The main changes are: 1) Fix verification issues in some BPF programs due to their stack usage patterns, from Eduard Zingerman. 2) Fix to add missing overflow checks in xdp_umem_reg and return an error in such case, from Kal Conley. 3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia. 4) Fix insufficient bpf_jit_limit default to avoid users running into hard to debug seccomp BPF errors, from Daniel Borkmann. 5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc to make it unambiguous from other errors, from Jesper Dangaard Brouer. 6) Two BPF selftest fixes to address compilation errors from recent changes in kernel structures, from Alexei Starovoitov. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support bpf: Adjust insufficient default bpf_jit_limit xsk: Add missing overflow check in xdp_umem_reg selftests/bpf: Fix progs/test_deny_namespace.c issues. selftests/bpf: Fix progs/find_vma_fail1.c build error. libbpf: Revert poisoning of strlcpy selftests/bpf: Tests for uninitialized stack reads bpf: Allow reads from uninit stack ==================== Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Merge tag 'for-net-2023-03-23' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix MGMT add advmon with RSSI command - L2CAP: Fix responding with wrong PDU type - Fix race condition in hci_cmd_sync_clear - ISO: Fix timestamped HCI ISO data packet parsing - HCI: Fix global-out-of-bounds - hci_sync: Resume adv with no RPA when active scan * tag 'for-net-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: HCI: Fix global-out-of-bounds Bluetooth: mgmt: Fix MGMT add advmon with RSSI command Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work Bluetooth: L2CAP: Fix responding with wrong PDU type Bluetooth: btqcomsmd: Fix command timeout after setting BD address Bluetooth: btinel: Check ACPI handle for NULL before accessing Bluetooth: Remove "Power-on" check from Mesh feature Bluetooth: Fix race condition in hci_cmd_sync_clear Bluetooth: btintel: Iterate only bluetooth device ACPI entries Bluetooth: ISO: fix timestamped HCI ISO data packet parsing Bluetooth: btusb: Remove detection of ISO packets over bulk Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet Bluetooth: hci_sync: Resume adv with no RPA when active scan ==================== Link: https://lore.kernel.org/r/20230323202335.3380841-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Merge tag 'wireless-2023-03-23' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.3 Third set of fixes for v6.3. mt76 has two kernel crash fixes and adding back 160 MHz channel support for mt7915. mac80211 has fixes for a race in transmit path and two mesh related fixes. iwlwifi also has fixes for races. * tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix mesh path discovery based on unicast packets wifi: mac80211: fix qos on mesh interfaces wifi: iwlwifi: mvm: protect TXQ list manipulation wifi: iwlwifi: mvm: fix mvmtxq->stopped handling wifi: mac80211: Serialize ieee80211_handle_wake_tx_queue() wifi: mwifiex: mark OF related data as maybe unused wifi: mt76: connac: do not check WED status for non-mmio devices wifi: mt76: mt7915: add back 160MHz channel width support for MT7915 wifi: mt76: do not run mt76_unregister_device() on unregistered hw ==================== Link: https://lore.kernel.org/r/20230323110332.C4FE4C433D2@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-23Bluetooth: HCI: Fix global-out-of-boundsSungwoo Kim
To loop a variable-length array, hci_init_stage_sync(stage) considers that stage[i] is valid as long as stage[i-1].func is valid. Thus, the last element of stage[].func should be intentionally invalid as hci_init0[], le_init2[], and others did. However, amp_init1[] and amp_init2[] have no invalid element, letting hci_init_stage_sync() keep accessing amp_init1[] over its valid range. This patch fixes this by adding {} in the last of amp_init1[] and amp_init2[]. ================================================================== BUG: KASAN: global-out-of-bounds in hci_dev_open_sync ( /v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) Read of size 8 at addr ffffffffaed1ab70 by task kworker/u5:0/1032 CPU: 0 PID: 1032 Comm: kworker/u5:0 Not tainted 6.2.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04 Workqueue: hci1 hci_power_on Call Trace: <TASK> dump_stack_lvl (/v6.2-bzimage/lib/dump_stack.c:107 (discriminator 1)) print_report (/v6.2-bzimage/mm/kasan/report.c:307 /v6.2-bzimage/mm/kasan/report.c:417) ? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) kasan_report (/v6.2-bzimage/mm/kasan/report.c:184 /v6.2-bzimage/mm/kasan/report.c:519) ? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) ? __pfx_hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:4635) ? mutex_lock (/v6.2-bzimage/./arch/x86/include/asm/atomic64_64.h:190 /v6.2-bzimage/./include/linux/atomic/atomic-long.h:443 /v6.2-bzimage/./include/linux/atomic/atomic-instrumented.h:1781 /v6.2-bzimage/kernel/locking/mutex.c:171 /v6.2-bzimage/kernel/locking/mutex.c:285) ? __pfx_mutex_lock (/v6.2-bzimage/kernel/locking/mutex.c:282) hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:485 /v6.2-bzimage/net/bluetooth/hci_core.c:984) ? __pfx_hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:969) ? read_word_at_a_time (/v6.2-bzimage/./include/asm-generic/rwonce.h:85) ? strscpy (/v6.2-bzimage/./arch/x86/include/asm/word-at-a-time.h:62 /v6.2-bzimage/lib/string.c:161) process_one_work (/v6.2-bzimage/kernel/workqueue.c:2294) worker_thread (/v6.2-bzimage/./include/linux/list.h:292 /v6.2-bzimage/kernel/workqueue.c:2437) ? __pfx_worker_thread (/v6.2-bzimage/kernel/workqueue.c:2379) kthread (/v6.2-bzimage/kernel/kthread.c:376) ? __pfx_kthread (/v6.2-bzimage/kernel/kthread.c:331) ret_from_fork (/v6.2-bzimage/arch/x86/entry/entry_64.S:314) </TASK> The buggy address belongs to the variable: amp_init1+0x30/0x60 The buggy address belongs to the physical page: page:000000003a157ec6 refcount:1 mapcount:0 mapping:0000000000000000 ia flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea0005054688 ffffea0005054688 000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffffaed1aa00: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ffffffffaed1aa80: 00 00 00 00 f9 f9 f9 f9 00 00 00 00 00 00 00 00 >ffffffffaed1ab00: 00 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 ^ ffffffffaed1ab80: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 f9 ffffffffaed1ac00: f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9 00 00 02 f9 This bug is found by FuzzBT, a modified version of Syzkaller. Other contributors for this bug are Ruoyu Wu and Peng Hui. Fixes: d0b137062b2d ("Bluetooth: hci_sync: Rework init stages") Signed-off-by: Sungwoo Kim <iam@sung-woo.kim> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23Bluetooth: mgmt: Fix MGMT add advmon with RSSI commandHoward Chung
The MGMT command: MGMT_OP_ADD_ADV_PATTERNS_MONITOR_RSSI uses variable length argument. This causes host not able to register advmon with rssi. This patch has been locally tested by adding monitor with rssi via btmgmt on a kernel 6.1 machine. Reviewed-by: Archie Pusaka <apusaka@chromium.org> Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Signed-off-by: Howard Chung <howardchung@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23Bluetooth: L2CAP: Fix responding with wrong PDU typeLuiz Augusto von Dentz
L2CAP_ECRED_CONN_REQ shall be responded with L2CAP_ECRED_CONN_RSP not L2CAP_LE_CONN_RSP: L2CAP LE EATT Server - Reject - run Listening for connections New client connection with handle 0x002a Sending L2CAP Request from client Client received response code 0x15 Unexpected L2CAP response code (expected 0x18) L2CAP LE EATT Server - Reject - test failed > ACL Data RX: Handle 42 flags 0x02 dlen 26 LE L2CAP: Enhanced Credit Connection Request (0x17) ident 1 len 18 PSM: 39 (0x0027) MTU: 64 MPS: 64 Credits: 5 Source CID: 65 Source CID: 66 Source CID: 67 Source CID: 68 Source CID: 69 < ACL Data TX: Handle 42 flags 0x00 dlen 16 LE L2CAP: LE Connection Response (0x15) ident 1 len 8 invalid size 00 00 00 00 00 00 06 00 L2CAP LE EATT Server - Reject - run Listening for connections New client connection with handle 0x002a Sending L2CAP Request from client Client received response code 0x18 L2CAP LE EATT Server - Reject - test passed Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-23SUNRPC: fix shutdown of NFS TCP client socketSiddharth Kawar
NFS server Duplicate Request Cache (DRC) algorithms rely on NFS clients reconnecting using the same local TCP port. Unique NFS operations are identified by the per-TCP connection set of XIDs. This prevents file corruption when non-idempotent NFS operations are retried. Currently, NFS client TCP connections are using different local TCP ports when reconnecting to NFS servers. After an NFS server initiates shutdown of the TCP connection, the NFS client's TCP socket is set to NULL after the socket state has reached TCP_LAST_ACK(9). When reconnecting, the new socket attempts to reuse the same local port but fails with EADDRNOTAVAIL (99). This forces the socket to use a different local TCP port to reconnect to the remote NFS server. State Transition and Events: TCP_CLOSE_WAIT(8) TCP_LAST_ACK(9) connect(fail EADDRNOTAVAIL(99)) TCP_CLOSE(7) bind on new port connect success dmesg excerpts showing reconnect switching from TCP local port of 926 to 763 after commit 7c81e6a9d75b: [13354.947854] NFS call mkdir testW ... [13405.654781] RPC: xs_tcp_state_change client 00000000037d0f03... [13405.654813] RPC: state 8 conn 1 dead 0 zapped 1 sk_shutdown 1 [13405.654826] RPC: xs_data_ready... [13405.654892] RPC: xs_tcp_state_change client 00000000037d0f03... [13405.654895] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3 [13405.654899] RPC: xs_tcp_state_change client 00000000037d0f03... [13405.654900] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3 [13405.654950] RPC: xs_connect scheduled xprt 00000000037d0f03 [13405.654975] RPC: xs_bind 0.0.0.0:926: ok (0) [13405.654980] RPC: worker connecting xprt 00000000037d0f03 via tcp to 10.101.6.228 (port 2049) [13405.654991] RPC: 00000000037d0f03 connect status 99 connected 0 sock state 7 [13405.655001] RPC: xs_tcp_state_change client 00000000037d0f03... [13405.655002] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3 [13405.655024] RPC: xs_connect scheduled xprt 00000000037d0f03 [13405.655038] RPC: xs_bind 0.0.0.0:763: ok (0) [13405.655041] RPC: worker connecting xprt 00000000037d0f03 via tcp to 10.101.6.228 (port 2049) [13405.655065] RPC: 00000000037d0f03 connect status 115 connected 0 sock state 2 State Transition and Events with patch applied: TCP_CLOSE_WAIT(8) TCP_LAST_ACK(9) TCP_CLOSE(7) connect(reuse of port succeeds) dmesg excerpts showing reconnect on same TCP local port of 936 with patch applied: [ 257.139935] NFS: mkdir(0:59/560857152), testQ [ 257.139937] NFS call mkdir testQ ... [ 307.822702] RPC: state 8 conn 1 dead 0 zapped 1 sk_shutdown 1 [ 307.822714] RPC: xs_data_ready... [ 307.822817] RPC: xs_tcp_state_change client 00000000ce702f14... [ 307.822821] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3 [ 307.822825] RPC: xs_tcp_state_change client 00000000ce702f14... [ 307.822826] RPC: state 9 conn 0 dead 0 zapped 1 sk_shutdown 3 [ 307.823606] RPC: xs_tcp_state_change client 00000000ce702f14... [ 307.823609] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3 [ 307.823629] RPC: xs_tcp_state_change client 00000000ce702f14... [ 307.823632] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3 [ 307.823676] RPC: xs_connect scheduled xprt 00000000ce702f14 [ 307.823704] RPC: xs_bind 0.0.0.0:936: ok (0) [ 307.823709] RPC: worker connecting xprt 00000000ce702f14 via tcp to 10.101.1.30 (port 2049) [ 307.823748] RPC: 00000000ce702f14 connect status 115 connected 0 sock state 2 ... [ 314.916193] RPC: state 7 conn 0 dead 0 zapped 1 sk_shutdown 3 [ 314.916251] RPC: xs_connect scheduled xprt 00000000ce702f14 [ 314.916282] RPC: xs_bind 0.0.0.0:936: ok (0) [ 314.916292] RPC: worker connecting xprt 00000000ce702f14 via tcp to 10.101.1.30 (port 2049) [ 314.916342] RPC: 00000000ce702f14 connect status 115 connected 0 sock state 2 Fixes: 7c81e6a9d75b ("SUNRPC: Tweak TCP socket shutdown in the RPC client") Signed-off-by: Siddharth Rajendra Kawar <sikawar@microsoft.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-03-22Bluetooth: Remove "Power-on" check from Mesh featureBrian Gix
The Bluetooth mesh experimental feature enable was requiring the controller to be powered off in order for the Enable to work. Mesh is supposed to be enablable regardless of the controller state, and created an unintended requirement that the mesh daemon be started before the classic bluetoothd daemon. Fixes: af6bcc1921ff ("Bluetooth: Add experimental wrapper for MGMT based mesh") Signed-off-by: Brian Gix <brian.gix@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-22Bluetooth: Fix race condition in hci_cmd_sync_clearMin Li
There is a potential race condition in hci_cmd_sync_work and hci_cmd_sync_clear, and could lead to use-after-free. For instance, hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and causing kernel panic when it is used in 'hci_cmd_sync_work'. Here's the call trace: dump_stack_lvl+0x49/0x63 print_report.cold+0x5e/0x5d3 ? hci_cmd_sync_work+0x282/0x320 kasan_report+0xaa/0x120 ? hci_cmd_sync_work+0x282/0x320 __asan_report_load8_noabort+0x14/0x20 hci_cmd_sync_work+0x282/0x320 process_one_work+0x77b/0x11c0 ? _raw_spin_lock_irq+0x8e/0xf0 worker_thread+0x544/0x1180 ? poll_idle+0x1e0/0x1e0 kthread+0x285/0x320 ? process_one_work+0x11c0/0x11c0 ? kthread_complete_and_exit+0x30/0x30 ret_from_fork+0x22/0x30 </TASK> Allocated by task 266: kasan_save_stack+0x26/0x50 __kasan_kmalloc+0xae/0xe0 kmem_cache_alloc_trace+0x191/0x350 hci_cmd_sync_queue+0x97/0x2b0 hci_update_passive_scan+0x176/0x1d0 le_conn_complete_evt+0x1b5/0x1a00 hci_le_conn_complete_evt+0x234/0x340 hci_le_meta_evt+0x231/0x4e0 hci_event_packet+0x4c5/0xf00 hci_rx_work+0x37d/0x880 process_one_work+0x77b/0x11c0 worker_thread+0x544/0x1180 kthread+0x285/0x320 ret_from_fork+0x22/0x30 Freed by task 269: kasan_save_stack+0x26/0x50 kasan_set_track+0x25/0x40 kasan_set_free_info+0x24/0x40 ____kasan_slab_free+0x176/0x1c0 __kasan_slab_free+0x12/0x20 slab_free_freelist_hook+0x95/0x1a0 kfree+0xba/0x2f0 hci_cmd_sync_clear+0x14c/0x210 hci_unregister_dev+0xff/0x440 vhci_release+0x7b/0xf0 __fput+0x1f3/0x970 ____fput+0xe/0x20 task_work_run+0xd4/0x160 do_exit+0x8b0/0x22a0 do_group_exit+0xba/0x2a0 get_signal+0x1e4a/0x25b0 arch_do_signal_or_restart+0x93/0x1f80 exit_to_user_mode_prepare+0xf5/0x1a0 syscall_exit_to_user_mode+0x26/0x50 ret_from_fork+0x15/0x30 Fixes: 6a98e3836fa2 ("Bluetooth: Add helper for serialized HCI command execution") Cc: stable@vger.kernel.org Signed-off-by: Min Li <lm0963hack@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-22Bluetooth: ISO: fix timestamped HCI ISO data packet parsingPauli Virtanen
Use correct HCI ISO data packet header struct when the packet has timestamp. The timestamp, when present, goes before the other fields (Core v5.3 4E 5.4.5), so the structs are not compatible. Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-22Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packetLuiz Augusto von Dentz
Because some transports don't have a dedicated type for ISO packets (see 14202eff214e1e941fefa0366d4c3bc4b1a0d500) they may use ACL type when in fact they are ISO packets. In the past this was left for the driver to detect such thing but it creates a problem when using the likes of btproxy when used by a VM as the host would not be aware of the connection the guest is doing it won't be able to detect such behavior, so this make bt_recv_frame detect when it happens as it is the common interface to all drivers including guest VMs. Fixes: 14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2023-03-22Bluetooth: hci_sync: Resume adv with no RPA when active scanZhengping Jiang
The address resolution should be disabled during the active scan, so all the advertisements can reach the host. The advertising has to be paused before disabling the address resolution, because the advertising will prevent any changes to the resolving list and the address resolution status. Skipping this will cause the hci error and the discovery failure. According to the bluetooth specification: "7.8.44 LE Set Address Resolution Enable command This command shall not be used when: - Advertising (other than periodic advertising) is enabled, - Scanning is enabled, or - an HCI_LE_Create_Connection, HCI_LE_Extended_Create_Connection, or HCI_LE_Periodic_Advertising_Create_Sync command is outstanding." If the host is using RPA, the controller needs to generate RPA for the advertising, so the advertising must remain paused during the active scan. If the host is not using RPA, the advertising can be resumed after disabling the address resolution. Fixes: 9afc675edeeb ("Bluetooth: hci_sync: allow advertise when scan without RPA") Signed-off-by: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-20 05:52:58 +0000